The bracket is a mounting element, which allows to hang in
the a HERMES Q or Hermes+ printer in to a production line.
Lieferumfang
1 - Bracket (prole 50x50, Rose+Krieger)
2 - 2 Center Screws
3 - 2 Screws M6x14
Mounting
► Mount the bracket to the production line.
If necessary remove meanwhile the side plates (4).
► Attach the center screws (2) on both sides of the frame.
► Hang in the printer into the bracket by inserting the center
screws (2) into the grooves (5) of the bracket.
► Fix the printer at both sides with each one screw M6x14
(3).
Bracket HERMES Q / Hermes+
Edition: 08/2019 · Part No. 9009208
4
12 3
32
2
3
5
Assembly Instructions
Germany
cab Produkttechnik GmbH & Co KG
Karlsruhe
Phone +49 721 6626 0
www.cab.de
USA
cab Technology, Inc.
Chelmsford, MA
Phone +1 978 250 8321
www.cab.de/us
Taiwan
cab Technology Co., Ltd.
Taipei
Phone +886 (02) 8227 3966
www.cab.de/tw
China
cab (Shanghai) Trading Co., Ltd.
Guangzhou
Phone +86 (020) 2831 7358
www.cab.de/cn
France
cab Technologies S.à.r.l.
Niedermodern
Phone +33 388 722501
www.cab.de/fr
Mexico
cab Technology, Inc.
Juárez
Phone +52 656 682 4301
www.cab.de/es
China
cab (Shanghai) Trading Co., Ltd.
Shanghai
Phone +86 (021) 6236 3161
www.cab.de/cn
South Africa
cab Technology (Pty) Ltd.
Randburg
Phone +27 11 886 3580
www.cab.de/za
-
1
CAB Accessories print and apply Manual de usuario
- Tipo
- Manual de usuario
En otros idiomas
Documentos relacionados
-
CAB HERMES Q Manual de usuario
-
CAB 4114R-200 Manual de usuario
-
-
-
-
CAB Hermes+ Instrucciones de operación
-
-
CAB HS Instrucciones de operación
-
