If you have other questions about RYDEEN Camera products, please contact your retailer or
Technical Support:
● Telephone: 1-877-777-8811(within USA only)
● Web address: www.rydeenmobile.com
● For more detail instructions please visit: www.rydeenmobile.com/camerahelp
Model: CM-CKH5
Embedded Type CMOS IV Camera
Sensor Super CMOS IV
Resolution 648*488
TV Line
Min Illumination
Angle
Voltage & Max Current 9~16V, 100mA
Video System NTSC(Color)
Image
Parking Line Parking ON(default)
Body Color Black(B)
Water Proof IP67-IP68
Operation Temp
Storage Temp
-30°C ~ +70°C
-40°C ~ +105°C
Mirror Image(default)
170°
<0.3 Lux
480
Waterproof: IP67-IP68 approved
Etanche: IP67-IP68 approuvé
Modèle: CM-CKH5
Caméra de Type Intégré CMOS IV
Capteur Super CMOS IV
Résolution
Ligne TV 480
Min Illumination <0.3 Lux
Angle de vue
Tension et Maximum Courant
Système Vidéo
Image
Parking Line
Couleur de Corps Black(B)
Water Proof
Opération Temp
Stockage Temp
648*488
170°
Miroir (par défaut)
Parking ON (par défaut)
IP67-IP68
-30°C ~ +70°C
-40°C ~ +105°C
NTSC(Color)
9~16V, 100mA
CM-CKH5
Image(5) Image(6)
Use Key Hole:
1.Video camera to bo mounted in the central part of the rear bumper(Depending to the desired
location). Also need to make sure you have enough space behind the bumper.
2. Mark the location of the camera on the bumper before installation(Image 1), the use the
supplied hole saw to drill the hole(Image 2). It is best to drill the hole going counter clockwise
first to prevent the paint from chipping, then proceed the drilling going clockwise after.
3. Aim and push the camera to the hole until it is secured by the ring clip. (Image 3)
4. After installation, check the camera to make sure it is property secured. (Image 4)
Use Wing Mount:
The camera can be positioned on the bottom side of the vehicle lid. (Image 5 & Image 6)
Super CMOS IV Sensor Super CMOS IV