Yamaha P3500S El manual del propietario

Categoría
Sintetizador
Tipo
El manual del propietario

Este manual también es adecuado para

POWER AMPLIFIER
Owner’s Manual
E
2
The above warning is located on the top
of the unit
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instruc-
tions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacle
s, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table spec-
ified by the manufacturer, or
sold with the apparatus.
When a cart is used, use cau-
tion when moving the cart/
apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been
dropped.
This mark indicates a dangerous electrically live terminal.
When connecting an external wire to this terminal, it is
necessary either to have “a person who have received
appropriate guidance on handling” make the connection or to
use leads or a cord that have been manufactured in such a way
that the connection can be made simply and without problem.
BRIDGE
11
++ --
(+)(-)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance
with the following code:
As the colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in
your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be connected
to the terminal in the plug which is marked by the letter E or by the
safety earth symbol or colored GREEN or GREEN-and-YELLOW.
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the termi-
nal which is marked with the letter L or coloured RED.
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (3 wires)
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
3
Precautions
— For safe operation —
WARNI N G
Connect this unit’s power cord only to an AC outlet of the type
stated in this Owners Manual or as marked on the unit. Failure
to do so is a fire and electrical shock hazard.
Do not allow water to enter this unit or allow the unit to
become wet. Fire or electrical shock may result.
Do not place a container with liquid or small metal objects on
top of this unit. Liquid or metal objects inside this unit are a
fire and electrical shock hazard.
Do not place heavy objects, including this unit, on top of the
power cord. A damaged power cord is a fire and electrical
shock hazard. In particular, be careful not to place heavy
objects on a power cord covered by a carpet.
Be sure to connect to an appropriate outlet with a protective
grounding connection. Improper grounding can result in elec-
trical shock.
Do not scratch, bend, twist, pull, or heat the power cord. A dam-
aged power cord is a fire and electrical shock hazard.
Do not remove the unit’s cover. You could receive an electrical
shock. If you think internal inspection, maintenance, or repair is
necessary, contact your dealer.
Do not modify the unit. Doing so is a fire and electrical shock haz-
ard.
If lightning begins to occur, turn off the power switch of the unit as
soon as possible, and unplug the power cable plug from the electri-
cal outlet.
If there is a possibility of lightning, do not touch the power cable
plug if it is still connected. Doing so may be an electrical shock
hazard.
If the power cord is damaged (i.e., cut or a bare wire is exposed),
ask your dealer for a replacement. Using the unit with a damaged
power cord is a fire and electrical shock hazard.
Should this unit be dropped or the cabinet be damaged, turn the
power switch off, remove the power plug from the AC outlet, and
contact your dealer. If you continue using the unit without heeding
this instruction, fire or electrical shock may result.
If you notice any abnormality, such as smoke, odor, or noise, or if
a foreign object or liquid gets inside the unit, turn it off immedi-
ately. Remove the power cord from the AC outlet. Consult your
dealer for repair. Using the unit in this condition is a fire and elec-
trical shock hazard.
CAUTION
Keep this unit away from the following locations:
- Locations exposed to oil splashes or steam, such as near cook-
ing stoves, humidifiers, etc.
- Unstable surfaces, such as a wobbly table or slope.
- Locations exposed to excessive heat, such as inside a car with
all the windows closed, or places that receive direct sunlight.
- Locations subject to excessive humidity or dust accumulation.
Do not place the power cord close to a heater. It may melt, causing
fire or electrical shock.
Hold the power cord plug when disconnecting it from an AC out-
let. Never pull the cord. A damaged power cord is a potential fire
and electrical shock hazard.
Do not touch the power plug with wet hands. Doing so is a poten-
tial electrical shock hazard.
This unit has ventilation holes at the front and rear to prevent the
internal temperature rising too high. Do not block them. Blocked
ventilation holes are a fire hazard.
In particular, do not
- place the unit on its side or upside down,
- place the unit in any poorly-ventilated location such as a book-
case or closet (other than on the dedicated rack),
- cover the unit with a table cloth or place it on a carpet or bed.
Allow enough free space around the unit for normal ventilation.
This should be: 5 cm at the sides, 10 cm behind, and 10 cm above.
If the airflow is not adequate, the unit will heat up inside and may
cause a fire.
To mount several of these units in a standard EIA rack, refer to the
rack mounting instructions on page 11.
To relocate the unit, turn the power switch off, remove the power
plug from the AC outlet, and remove all connecting cables. Dam-
aged cables may cause fire or electrical shock.
When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug
from the outlet. Even when the power switch is turned off, elec-
tricity is still flowing to the product at the minimum level. When
you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
Do not place the device in a location where it may come into con-
tact with corrosive gases or salt air. Doing so may result in mal-
function.
Use only speaker cables when connecting speakers to amplifier
outputs. Using other types of cables is a fire hazard.
Turn off all musical instruments, audio equipment, and speakers
when connecting to this unit. Use the correct connecting cables
and connect as specified.
Always lower the volume control to minimum before turning on
the power to this unit. A sudden blast of sound may damage your
hearing.
Do not use this amplifier for any purpose other than driving loud-
speakers.
If you know you will not use this unit for a long period of time,
such as when going on vacation, remove the power plug from the
AC outlet. Leaving it connected is a potential fire hazard.
Installation
Operation
In case an abnormality occurs during operation
Installation
Operation
4
— For correct operation —
XLR-type connectors are wired as follows
Pin 1: ground; Pin 2: hot (+); Pin 3: cold (–).
Use of a mobile phone near this unit may induce noise. If noise
occurs, move the phone further from the unit.
Always turn the power off when the amplifier is not in us e.
Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation.
Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners.
* This applies only to products (P7000S, P5000S) distributed by YAMAHA CORPORATION OF AMERICA.
Connector pin assignments Interference from Cell Phones
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authori-
zation to use this product in the USA.
FCC INFORMATION (U.S.A.)
5
Introduction
Thank you for your purchase of the YAMAHA P7000S, P5000S, P3500S or P2500S power amplifier.
These P-series amplifiers fully incorporate Yamaha’s renown technological expertise, and offer high
reliability, rock-solid stability, and superb acoustic characteristics—all in a trim, 2U-sized package.
Features
• With two types of input jacks (balanced XLR and balanced phone) and three types of output jacks
(Speakon, 5-way binding post, and phone), the P series is suitable for a wide variety of applications
and installed systems.
• The unit offers three operating modes: STEREO (where Channels A and B operate independently),
PARALLEL (where the unit outputs a mono source through twin amplifier systems), and BRIDGE
(where the unit operates as a single high-power amp).
• Each channel is equipped with an independent OFF/LOW CUT/SUBWOOFER switch—where
LOW CUT engages a high-pass filter, and SUBWOOFER engages a low-pass filter. With LOW CUT
or SUBWOOFER selected, you can adjust the cutoff frequency from 25 to 150 Hz.
• Each channel has its own SIGNAL and CLIP indicators.
• The PROTECTION indicator lights up—and sound output is automatically muted—whenever the
unit’s protective circuitry is operating. The TEMP indicator lights up if the unit is running hot.
• Variable-speed low-noise fans ensure high reliability.
This Owners Manual covers the four models: P7000S, P5000S, P3500S and P2500S power amplifi-
ers. Please read through this manual carefully before beginning use, so that you will be able to take full
advantage of the amplifiers superlative features and enjoy trouble-free operation for years to come.
After reading through the manual, please store it in a safe place.
Contents
Controls and Functions ..................................... 6
Front Panel .......................................................... 6
Rear Panel ........................................................... 7
Speaker Connections ........................................ 9
Speaker impedance ............................................. 9
Wiring ................................................................ 10
Rack Mounting ................................................ 11
Specifications .................................................. 12
General Specifications ....................................... 12
Block Diagram ................................................... 13
Dimensions ........................................................ 14
Current Draw ..................................................... 14
Tr o ubleshooting ............................................... 15
6
Controls and Functions
Front Panel
1 POWER switch and indicator
Press to toggle the power on or off. The POWER indicator
lights up green when the power is ON.
2 TEMP indicator
Lights up red if the heat sink temperature exceeds 85°C
(185°F).
3 PROTECTION indicator
Lights up red to indicate that protection is in effect. Specifi-
cally, lights up if the heat sink overheats, or if a DC voltage is
detected at the amplifier outputs. Also lights up for about three
seconds at time of power-on, as the amp gets ready to operate.
To provide protection, the unit will not output any sound from
the speakers while this indicator is lit up. When start-up is
completed or the problem is corrected, the indicator goes off
and normal operation resumes.
4 CLIP indicator
Lights up red when the output signal distortion on the corre-
sponding channel rises above 1%—indicating that “clipping”
has occurred because the signal level is too high.
5 SIGNAL indicator
Lights up green when the corresponding channels output level
exceeds 2 Vrms (equivalent to 1/2 W into an 8 Ω load, or 1 W
into a 4 Ω load).
6 Volume control knobs
Each control knob adjusts the volume of the corresponding
channel, in 31 steps from –
dB to 0 dB.
NOTE:
If you wish to lock in the knob settings, you can fasten the sup-
plied security cover over the knobs so that the settings will not
be disturbed.
How to install the security cover
(1) Use the supplied hex wrench to remove the four attach-
ment screws from the amplifier.
(2) Adjust the security cover to the position of screw holes.
Fasten it into place using the same screws.
7 indicator
Lights up yellow if the YS PROCESSING switch on the rear
panel is set ON. (See page 7.)
8 Air intakes
The amplifier uses forced-air cooling. The cooling fans draw
air in from the front and exhaust it through the rear. Please be
sure that you do not block the air intakes or exhaust vents.
NOTE:
The fans do not come on at initial power-on, but will switch on
automatically when the temperature of the heat sink rises above
50°C (122°F). The fan speed will then vary automatically as
the temperature changes.
2 4
7361 58 8
7
Rear Panel
1 FILTER switch and FREQUENCY adjustment knob
(One pair for each channel)
Use these controls to select the filter type and adjust the cutoff
frequency on each channel (A and B). You use the FILTER
switch to select the filter, as follows.
OFF ...................... Do not use any filter.
SUBWOOFER..... Use a low-pass filter. The amplifier outputs
the frequencies that are lower than the cut-
off set by the FREQUENCY adjustment
knob.
LOW CUT ........... Use a high-pass filter. You can use this set-
ting to filter out unneeded low or subsonic
frequencies.
If you select SUBWOOFER or LOW CUT, you can then use
the FREQUENCY adjustment knob to adjust the cutoff fre-
quency. The adjustment range is 25 Hz to 150 Hz.
NOTE:
If the amplifer is set to BRIDGE mode, only the switch and
knob for Channel A are effective. (The Channel B frequency
controls are disabled.)
2 ON/OFF switch
If you set this switch ON, the amplifier adds low-frequency
compensation so as to enhance speaker output. The results (the
actual change in the low-frequency balance) will vary accord-
ing to the speaker type. Note that this switch is effective only if
the FILTER switch is set to OFF.
NOTE:
This feature provides improved frequency reponse on speakers
such as the YAMAHA S112 and S115.
3 INPUT jacks (Channels A, B)
Two jack types are provided for each channel. Note that if you
are using BRIDGE or PARALLEL mode, only the Channel A
jacks are effective.
•XLR-3-31 jack
The XLR-3-31 input jacks are wired as shown below.
Phone jack
Phone jacks are wired as follows.
SUB
WOOFER
LOW CUT
ON
STEREO BRIDGE
PARALLEL
INPUT
SPEAKERS
BRIDGE
OFF
OFF
1
1
+
-
+
-
+
-
+
-
2
2
1
1
+
-
+
-
SUB
WOOFER
LOW CUT
OFF
FREQUENCY
Hz
25 150
90
50
125
FREQUENCY
11
2332
L
O
C
K
L
O
C
K
++ --
(+)(-)
Hz
25 150
90
50
125
1 5
4 6
2
3
SUB
WOOFER
LOW CUT
OFF
25 Hz-150 Hz
25 Hz to 150 Hz
Cutoff frequency
1
2
3
hot
ground
cold
ring (cold)
tip (hot)sleeve
(ground)
8
4 STEREO/PARALLEL/BRIDGE switch
Use this switch to select the operating mode.
STEREO mode
Channels A and B operate independently (as with a conven-
tional stereo amplifier). The Channel A input goes to the Chan-
nel A output jacks, and the Channel B input goes to the
Channel B output jacks.
PARALLEL mode
The Channel A input signal is output through both the Channel
A and Channel B output jacks. The Channel B input jacks do
not function. Channel A and B volumes can be independently
adjusted.
BRIDGE mode
The Channel A input signal is output from the BRIDGE output
jacks. To adjust the volume, you must use the Channel A vol-
ume control knob.
5 SPEAKER jacks
Neutrik NL4FC Speakon output connectors,
5-way binding post output jacks,
Phone output jacks
For minimum speaker impedenance values, see page 9.
6 GND terminal
This is a screw-type ground terminal. If you are having a prob-
lem with hum or noise, use this terminal to connect to ground
or to connect to the chassis of the mixer, preamp, or other
device in your system.
9
Speaker Connections
Speaker impedance
Speakers can be connected to the amplifier as shown below. Note that speaker impedance will vary according to the connection method and
the number of speakers. Please be sure that your speakers
impedance is not less than the relevant minimum value indicated below.
Connection configurations for STEREO and
PARALLEL modes
When using 5-way binding post output jacks
When using Speakon connector
When using phone jack
Connection configurations for BRIDGE
mode
When using 5-way binding post output jacks
When using Speakon connector
BRIDGE
11
++ --
(+)(-)
STEREO BRIDGE
PARALLEL
STEREO BRIDGE
PARALLEL
or
Minimum
speaker
impedance:
4 Ω
Minimum
speaker
impedance:
4 Ω
SPEAKERS
1
1
+
-
+
-
+
-
+
-
2
2
1
1
+
-
+
-
2332
L
O
C
K
L
O
C
K
Minimum
speaker
impedance:
4 Ω
SPEAKERS
1
1
+
-
+
-
+
-
+
-
2
2
1
1
+
-
+
-
2332
L
O
C
K
L
O
C
K
Minimum
speaker
impedance:
4 Ω
Minimum
speaker
impedance:
8 Ω
SPEAKERS
1
1
+
-
+
-
+
-
+
-
2
2
1
1
+
-
+
-
2332
L
O
C
K
L
O
C
K
Minimum
speaker
impedance:
8 Ω
10
Wiring
5-way binding post
(1) Turn off the POWER switch.
(2) Remove the cover attachment screws and remove the pro-
tective cover from the speaker terminals.
(3) Remove about 15 mm of insulation from the end of each
speaker cable, and pass the bare wire through the holes in
the appropriate speaker terminals. Tighten the terminals to
securely clamp the wires. Refer to page 9 for speaker
polarities.
Note to users in the USA:
Please use Class 3 wiring. (P7000S, P5000S)
Please use Class 2 wiring. (P3500S, P2500S)
Be sure that the bare wire ends do not jut out from the ter-
minals and touch the chassis. The following shows how
the cable should look when correctly attached.
(4) Reattach the protective cover over the speaker terminals.
Speakon connector
(1) Turn off the POWER switch.
(2) Insert the Neutrik NL4FC plugs into the Speakon connec-
tor on the rear of the amplifier, and turn clockwise to lock.
Neutrik NL4FC plugs
Phone jack
(1) Turn off the POWER switch.
(2) Insert the phone plug into the jack on the rear of the ampli-
fier.
Screw
15mm
* Actual size
*
Speaker cable
Chassis
Bare wire
CHANNEL
STEREO or PARALLEL
BRIDGE
1+ A+ 1+ +
1– A– 1–
2+ B+ 2+
2– B– 2–
Neutrik NL4FC plugs
CHANNEL
1+ B+
1– B–
A
B
11
Rack Mounting
Mounting in a standard EIA rack
If you are mounting multiple power amplifiers in a rack, be sure to install ventilation panel(s) as shown below. Also be sure to use metal brack-
ets (one on each side) to support the rear of each amplifer.
Note: EIA stands for Electronic Industries Alliance.
Ventilation panel(s)
Use 1U-size blank panel(s).
If mounting up to four amplifiers in
an open-backed rack
Install a ventilation panel as shown below.
When mounting five or more amplifi-
ers in an open-backed rack, and
when mounting any number of
amplifiers in a close-backed rack
Install ventilation panels above and below each amplifier, as shown
below.
480
44
Unit: mm
Ventilation panel
(Attach to the front
or rear of the rack.)
12
Specifications
General Specifications
0 dBu=0.775 Vrms, Half Power=1/2 Power Output Level (Rated Power)
Specifications and descriptions in this owners manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or spec-
ifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha
dealer.
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 25A (P7000S, P5000S)/66A (P3500S)/68A (P2500S)
Conforms to Environments: E1, E2, E3 and E4
P7000S P5000S P3500S P2500S
Power Output Level (Rated Power) 8 Ω/STEREO 750 W
× 2 525 W × 2 390 W × 2275 W × 2
1 kHz 4 Ω/STEREO 1100 W
× 2 750 W × 2 590 W × 2 390 W × 2
THD + N = 1% 8 Ω/BRIDGE 2200 W
× 1 1500 W × 1 1180 W × 1780 W × 1
8 Ω/STEREO 700 W
× 2
650 W
×
2 (European Model)
500 W × 2 350 W × 2250 W × 2
20 Hz – 20 kHz 4 Ω/STEREO 950 W
× 2 700 W × 2 450 W × 2 310 W × 2
THD + N = 0.1% 8 Ω/BRIDGE 1900 W
× 1 1400 W × 1 900 W × 1620 W × 1
1 kHz 2 Ω/STEREO 1600 W
× 21300 W × 2 1000 W × 2650 W × 2
20 ms non-clip 4 Ω/BRIDGE 3200 W
× 1 2600 W × 1 2000 W × 11300 W × 1
Power Bandwidth Half Power 10 Hz – 40 kHz (THD + N = 0.5 %)
Tot al Harmonic Distortion (THD + N) 4 Ω – 8 Ω/STEREO
0.1 %
20 Hz – 20 kHz, Half Power 8 Ω/BRIDGE
Frequency Response
RL = 8 Ω, Po = 1 W
20 Hz – 50 kHz
+0 dB, –1.5 dB
Intermodulation Distortion (IMD) 4 Ω – 8 Ω/STEREO
0.1 %
60 Hz:7 kHz, 4:1, Half Power 8 Ω/BRIDGE
Channel Separation Half Power RL = 8 Ω 1 kHz
70 dB
Vol. maxinput 600 Ω shunt
Residual Noise Vol. min. 20 Hz – 20 kHz (DIN AUDIO)
–70 dBu
SN Ratio 20 Hz – 20 kHz (DIN AUDIO) 104 dB 103 dB 102 dB 100 dB
Damping Factor RL = 8 Ω, 1 kHz
350 200
Input Sensitivity
RL = 8 Ω
(1 kHz, THD + N = 1 %)
+8.0 dBu +6.4 dBu +5.2 dBu +3.6 dBu
Voltage Gain RL = 8 Ω 32 dB
Input Impedance 30 kΩ/balanced, 15 kΩ/unbalanced
C
ontrols Front Panel P
OWER switch (Push on/Push off)
Two 31-step Volume control knobs (one per ch)
Rear Panel MODE switch (STEREO/PARALLEL/BRIDGE)
Two F ILT E R switches (SUBWOOFER/LOW CUT/OFF)
Two fc knobs (25 to 150 Hz, 12 dB/octave)
YS Processing switch (ON/OFF)
Connectors INPUT XLR-3-31 jacks (one per ch)
1/4-inch TRS phone jacks (one per ch)
OUTPUT Speakon jacks (one per ch)
5-way binding posts
1/4-inch phone jacks (one per ch)
Indicators POWER
× 1 (Green)
PROTECTION
× 1 (Red)
TEMP
× 1 (Red) (heatsink temp 85°C)
CLIP
× 2 (Red)
SIGNAL
× 2 (Green)
YS Processing
× 1 (Yellow)
Load Protection POWER switch ON/OFF muting
DC-fault power supply
shutdown
DC detection
Amp. Protection
Temp. detection (heat sink temp 90°C), VI limiter (RL 1
Ω
)
Limiter
Comp: THD 0.5 %
Cooling Dual variable-speed fan Single variable-speed fan
Power Requirements 120 V, 220 V – 240 V; 50 Hz/60 Hz
Power Consumption Idling 35 W 35 W 30 W 25 W
Output power, 4 Ω 650 W 500 W 450 W 320 W
Dimensions (W
× H × D) 480 × 88 × 456 mm (18-7/8" × 3-7/16" × 17-15/16")
Weight 12.0 kg (26.5 lbs)
12.0 kg (26.5 lbs)15.0 kg (33.1 lbs)14.0 kg (30.9 lbs)
Included AccessoriesSecurity cover (with a hex wrench), Owner’s Manual
13
Block Diagram
P7000S, P5000S
P3500S, P2500S
CHANNEL A
[BRIDGE]
[PARALLEL]
INPUT
CHANNEL B
BA
State variable
Active filter
ON
OFF
YAMAHA
SPEAKER
PROCESSING
State variable
Active filter
BA
HPF
LPF
CHANNEL A
ATT
OFF
Limiter
Limiter
INV
Temperature
Sensor
(Heat Sink)
Protection
Circuit
CLIP
CLIP
Ach Power Amp
Bch Power Amp
SIGNAL
PROTECTION
TEMP
SPEAKERS
CHANNEL A
3
3
1
1
2
2
1+
1+
1-
1-
2-
2-
2+
2+
A+B BRIDGE
CHANNEL B
SIGNAL
YAMAHA
SPEAKER
PROCESSING
CHANNEL B
ATT
PARALLEL
BRIDGE
STEREO
HPF
Frequency
[25 Hz-150 Hz]
POWER
FAN
+B
E
-B
+24
-24
E
POWER CIRCUIT
Frequency
[25 Hz-150 Hz]
OFF
LPF
POWER SW
14
Dimensions
Current Draw
P7000S
P5000S
P3500S
Line Current (A) Power (W) Thermal Dissipation
100/120V 230/240V In Out Dissipated Btu/h kcal/h
standby 0.080.04505174
idle 1.0 0.5 35035 119 30
1/8 power
8Ω/ch 5.4 3.0 379 188 191 653 165
4Ω/ch 8.5 4.7 611 275 336 1150 289
1/3 power
8Ω/ch 12.8 7.0 918 500 418 1430 360
4Ω/ch 20.6 11.3 1481 733 748 2550 643
Line Current (A) Power (W) Thermal Dissipation
100/120V 230/240V In Out Dissipated Btu/h kcal/h
standby 0.080.04505174
idle 1.0 0.5 35035 119 30
1/8 power
8Ω/ch 4.0 2.2 277 131 146 499 126
4Ω/ch 6.2 3.4 436 188 249 848 214
1/3 power
8Ω/ch 9.3 5.1 673350 323 1100 278
4Ω/ch 14.7 8.1 1057 500 557 1900 479
Line Current (A) Power (W) Thermal Dissipation
100/120V 230/240V In Out Dissipated Btu/h kcal/h
standby 0.080.04505174
idle 1.0 0.5 30030 102 26
1/8 power
8Ω/ch 3.2 1.7 227 98 130443 112
4Ω/ch 5.0 2.8 378 148 231 787 198
1/3 power
8Ω/ch 7.3 4.0 551 260 291 993 250
4Ω/ch 12.2 6.7 917 393 524 1790 450
Unit: mm
15
P2500S
1/8 power is typical of program material with occasional clipping. Refer to these figures for most applications.
1/3 power represents program material with extremely heavy clipping.
Test signal: Pink Noise, bandwidth limited from 22Hz to 22kHz
1W = 0.860kcal/h, 1BTU = 0.252kcal
Note that Line Voltage [V] x Line Current [A] = [VA], not equals to [W].
Inrush current
P7000S, P5000S: 11A (100V), 13A (120V), 25A (240V)
P3500S: 142A (100V), 170A (120V), 66A (240V)
P2500S: 103A (100V), 150A (120V), 68A (240V)
Troubleshooting
The following table lists the main causes of abnormal operation and the corrective measures required, as well as the protective circuit opera-
tion in each case.
P3500S, P2500S
P7000S, P5000S
Line Current (A) Power (W) Thermal Dissipation
100/120V 230/240V In Out Dissipated Btu/h kcal/h
standby 0.080.04505174
idle 1.0 0.5 25 0 25 85 22
1/8 power
8Ω/ch 2.4 1.3 174 69 105 358 90
4Ω/ch 3.6 2.0 271 98 173 592 149
1/3 power
8Ω/ch 5.6 3.1 421 183 238 811 204
4Ω/ch 8.8 4.8 657 260 397 1350 341
Indicator(s)Possible Cause Remedy Protection Circuit
CLIP indicator lights.
There is a short at a s peaker
terminal, amplifier terminal, or
wire.
Locate and correct the cause of
the short.
The PC limiter circuit operates
to protect t
he pow
er
transistors.
The amplifier load is excessive.
Use a speaker system with an
impedance of at least 4 Ω
(STEREO/PARALLEL mode) or
8 Ω (BRIDGE mode).
TEMP indicator lights.
The heat sink temperature has
exceeded 85°C (185°F).
Check the ventilation slots, and
provide better airflow around
the amplifier.
The TEMP indicator lights up
to indicate temperature
war
ning.
PR
OTECTION indicator lights.
The heat sink temperature has
exceeded 95°C (203°F).
Check the amplifier ventilation
conditions and take appropriate
measures to improve the
airflow around the amplifier.
The thermal protection circuit
operates to protect the power
transistors.
Indicator(s)Possible Cause Remedy Protection Circuit
PROTECTION indicator lights.
A DC voltage of ±2 V or greater
was generated in the power
ampl
ifier’s ou
tput circuit.
Consult your dealer or the
nearest Yamaha service center.
The relay operates to protect
the speaker system.
Indicator(s)Possible Cause Remedy Protection Circuit
Power has been shut down. (All indicators
are off.)
A DC voltage of ± 2 V or
greater was generated in the
power amplifier’s output circuit.
Consult your dealer or the
nearest Yamaha service center.
The p
rotection circuitry shut off
the power to protect the
speaker system.
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más
cercana o el distribuidor autorizado que se lista debajo.
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Toronto, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, CA 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de México, S.A. de C.V.
Av. Insurgentes Sur 1647 Piso 9, Col. San José
Insurgentes, Delegación Benito Juárez, México,
D.F., C.P. 03900
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi,
CEP 04534-013 São Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.,
Sucursal Argentina
Olga Cossettini 1553, Piso 4 Norte,
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
VENEZUELA
Yamaha Music Latin America, S.A.,
Sucursal Venezuela
C.C. Manzanares Plaza P4
Ofic. 0401- Manzanares-Baruta
Caracas Venezuela
Tel: 58-212-943-1877
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso No.7, Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, República de Panamá
Tel: +507-269-5311
THE UNITED KINGDOM/IRELAND
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, U.K.
Tel: 01908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH
Branch Switzerland in Zürich
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 044-387-8080
AUSTRIA/BULGARIA
Yamaha Music Europe GmbH Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/HUNGARY/
ROMANIA/SLOVAKIA/SLOVENIA
Yamaha Music Europe GmbH
Branch Austria (Central Eastern Europe Office)
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
POLAND/LITHUANIA/LATVIA/ESTONIA
Yamaha Music Europe GmbH
Branch Poland Office
ul. Wrotkowa 14 02-553 Warsaw, Poland
Tel: 022-500-2925
MALTA
Olimpus Music Ltd.
The Emporium, Level 3, St. Louis Street Msida
MSD06
Tel: 02133-2144
NETHERLANDS/BELGIUM/
LUXEMBOURG
Yamaha Music Europe Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, Netherlands
Tel: 0347-358 040
FRANCE
Ya m ah a Musi c E u r o p e
7 rue Ambroise Croizat, Zone d'activites Pariest,
77183 Croissy-Beaubourg, France
Tel: 01-64-61-4000
ITALY
Yamaha Music Europe GmbH, Branch Italy
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Music Europe GmbH Ibérica, Sucursal
en España
Ctra. de la Coruna km. 17,200, 28231
Las Rozas (Madrid), Spain
Tel: +34-91-639-88-88
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN/FINLAND/ICELAND
Yamaha Music Europe GmbH Germany filial
Scandinavia
JA Wettergrensgata 1, Västra Frölunda, Sweden
Tel: +46 31 89 34 00
DENMARK
Yamaha Music Europe GmbH, Tyskland – filial
Denmark
Generatorvej 8B, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
NORWAY
Yamaha Music Europe GmbH Germany -
Norwegian Branch
Grini Næringspark 1, N-1361 Østerås, Norway
Tel: 67 16 78 00
RUSSIA
Yamaha Music (Russia) LLC.
Room 37, bld. 7, Kievskaya street, Moscow,
121059, Russia
Tel: 495 626 5005
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Ya m ah a Musi c G u l f F Z E
Office JAFZA 16-512, P.O.Box 17328,
Jebel Ali - Dubai, UAE
Tel: +971-4-881-5868
TURKEY
Yamaha Music Europe GmbH
Merkezi Almanya Türkiye İstanbul Şubesi
Maslak Meydan Sokak No:5 Spring Giz Plaza
Bağımsız Böl. No:3, 34398 Şişli İstanbul
Tel: +90-212-999-8010
CYPRUS
Yamaha Music Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Ya m ah a Musi c G u l f F Z E
Office JAFZA 16-512, P.O.Box 17328,
Jebel Ali - Dubai, U.A.E
Tel: +971-4-881-5868
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: 400-051-7700
INDIA
Yamaha Music India Pvt. Ltd.
Spazedge building, Ground Floor, Tower A, Sector
47, Gurgaon- Sohna Road, Gurgaon, Haryana, India
Tel: 0124-485-3300
INDONESIA
PT. Yamaha Musik Indonesia (Distributor)
Yamaha Music Center Bldg. Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 021-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 02-3467-3300
MALAYSIA
Yamaha Music (Malaysia) Sdn., Bhd.
No.8, Jalan Perbandaran, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia
Tel: 03-78030900
SINGAPORE
Yamaha Music (Asia) Private Limited
Block 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
Tel: 65-6747-4374
TAIWAN
Yamaha Music & Electronics Taiwan Co.,Ltd.
3F, No.6, Section 2 Nan-Jing East Road, Taipei,
Taiwan R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
3, 4, 15 and 16th floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2622
VIETNAM
Yamaha Music Vietnam Company Limited
15th Floor, Nam A Bank Tower, 201-203 Cach
Mang Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
Tel: +84-8-3818-1122
OTHER ASIAN COUNTRIES
Yam a h a C o r po r ati o n
Sales & Marketing Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
AUSTRALIA
Yam a h a M u s ic A u st r a li a Pty. Lt d .
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yam a h a C o r po r ati o n
Sales & Marketing Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
HEAD OFFICE Yamaha Corporation, Audio Products Sales and Marketing Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Yamaha Pro Audio global web site
http://www.yamahaproaudio.com/
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
C.S.G., Pro Audio Division
© 2003-2014 Yamaha Corporation
409CRZCx.x-01G0
Printed in Indonesia
WB09700
PA 3 7

Transcripción de documentos

POWER AMPLIFIER Owner’s Manual E • Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The above warning is located on the top of the unit IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience 11 12 13 14 receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or colored GREEN or GREEN-and-YELLOW. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. 2 (3 wires) - 1 + + (-) 1 - (+) BRIDGE This mark indicates a dangerous electrically live terminal. When connecting an external wire to this terminal, it is necessary either to have “a person who have received appropriate guidance on handling” make the connection or to use leads or a cord that have been manufactured in such a way that the connection can be made simply and without problem. Precautions — For safe operation — WARNING ● Installation ● ● ● ● ● Connect this unit’s power cord only to an AC outlet of the type stated in this Owner’s Manual or as marked on the unit. Failure to do so is a fire and electrical shock hazard. Do not allow water to enter this unit or allow the unit to become wet. Fire or electrical shock may result. Do not place a container with liquid or small metal objects on top of this unit. Liquid or metal objects inside this unit are a fire and electrical shock hazard. Do not place heavy objects, including this unit, on top of the power cord. A damaged power cord is a fire and electrical shock hazard. In particular, be careful not to place heavy objects on a power cord covered by a carpet. Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can result in electrical shock. ● ● In case an abnormality occurs during operation ● ● ● Operation ● ● Do not modify the unit. Doing so is a fire and electrical shock hazard. If lightning begins to occur, turn off the power switch of the unit as soon as possible, and unplug the power cable plug from the electrical outlet. If there is a possibility of lightning, do not touch the power cable plug if it is still connected. Doing so may be an electrical shock hazard. Do not scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire and electrical shock hazard. Do not remove the unit’s cover. You could receive an electrical shock. If you think internal inspection, maintenance, or repair is necessary, contact your dealer. If the power cord is damaged (i.e., cut or a bare wire is exposed), ask your dealer for a replacement. Using the unit with a damaged power cord is a fire and electrical shock hazard. Should this unit be dropped or the cabinet be damaged, turn the power switch off, remove the power plug from the AC outlet, and contact your dealer. If you continue using the unit without heeding this instruction, fire or electrical shock may result. If you notice any abnormality, such as smoke, odor, or noise, or if a foreign object or liquid gets inside the unit, turn it off immediately. Remove the power cord from the AC outlet. Consult your dealer for repair. Using the unit in this condition is a fire and electrical shock hazard. CAUTION Installation ● ● ● ● ● ● ● Keep this unit away from the following locations: - Locations exposed to oil splashes or steam, such as near cooking stoves, humidifiers, etc. - Unstable surfaces, such as a wobbly table or slope. - Locations exposed to excessive heat, such as inside a car with all the windows closed, or places that receive direct sunlight. - Locations subject to excessive humidity or dust accumulation. Do not place the power cord close to a heater. It may melt, causing fire or electrical shock. Hold the power cord plug when disconnecting it from an AC outlet. Never pull the cord. A damaged power cord is a potential fire and electrical shock hazard. Do not touch the power plug with wet hands. Doing so is a potential electrical shock hazard. This unit has ventilation holes at the front and rear to prevent the internal temperature rising too high. Do not block them. Blocked ventilation holes are a fire hazard. In particular, do not - place the unit on its side or upside down, - place the unit in any poorly-ventilated location such as a bookcase or closet (other than on the dedicated rack), - cover the unit with a table cloth or place it on a carpet or bed. Allow enough free space around the unit for normal ventilation. This should be: 5 cm at the sides, 10 cm behind, and 10 cm above. If the airflow is not adequate, the unit will heat up inside and may cause a fire. To mount several of these units in a standard EIA rack, refer to the rack mounting instructions on page 11. ● ● ● To relocate the unit, turn the power switch off, remove the power plug from the AC outlet, and remove all connecting cables. Damaged cables may cause fire or electrical shock. When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. Do not place the device in a location where it may come into contact with corrosive gases or salt air. Doing so may result in malfunction. Operation ● ● ● ● ● Use only speaker cables when connecting speakers to amplifier outputs. Using other types of cables is a fire hazard. Turn off all musical instruments, audio equipment, and speakers when connecting to this unit. Use the correct connecting cables and connect as specified. Always lower the volume control to minimum before turning on the power to this unit. A sudden blast of sound may damage your hearing. Do not use this amplifier for any purpose other than driving loudspeakers. If you know you will not use this unit for a long period of time, such as when going on vacation, remove the power plug from the AC outlet. Leaving it connected is a potential fire hazard. 3 — For correct operation — Connector pin assignments ● XLR-type connectors are wired as follows Pin 1: ground; Pin 2: hot (+); Pin 3: cold (–). Interference from Cell Phones ● Use of a mobile phone near this unit may induce noise. If noise occurs, move the phone further from the unit. Always turn the power off when the amplifier is not in use. Illustrations in this manual are for explanatory purposes only, and may not match the actual appearance of the product during operation. Company names and product names used in this Owner's Manual are trademarks or registered trademarks of their respective owners. FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. * This applies only to products (P7000S, P5000S) distributed by YAMAHA CORPORATION OF AMERICA. 4 Introduction Thank you for your purchase of the YAMAHA P7000S, P5000S, P3500S or P2500S power amplifier. These P-series amplifiers fully incorporate Yamaha’s renown technological expertise, and offer high reliability, rock-solid stability, and superb acoustic characteristics—all in a trim, 2U-sized package. Features • With two types of input jacks (balanced XLR and balanced phone) and three types of output jacks (Speakon, 5-way binding post, and phone), the P series is suitable for a wide variety of applications and installed systems. • The unit offers three operating modes: STEREO (where Channels A and B operate independently), PARALLEL (where the unit outputs a mono source through twin amplifier systems), and BRIDGE (where the unit operates as a single high-power amp). • Each channel is equipped with an independent OFF/LOW CUT/SUBWOOFER switch—where LOW CUT engages a high-pass filter, and SUBWOOFER engages a low-pass filter. With LOW CUT or SUBWOOFER selected, you can adjust the cutoff frequency from 25 to 150 Hz. • Each channel has its own SIGNAL and CLIP indicators. • The PROTECTION indicator lights up—and sound output is automatically muted—whenever the unit’s protective circuitry is operating. The TEMP indicator lights up if the unit is running hot. • Variable-speed low-noise fans ensure high reliability. This Owner’s Manual covers the four models: P7000S, P5000S, P3500S and P2500S power amplifiers. Please read through this manual carefully before beginning use, so that you will be able to take full advantage of the amplifier’s superlative features and enjoy trouble-free operation for years to come. After reading through the manual, please store it in a safe place. Contents Controls and Functions ..................................... 6 Front Panel .......................................................... 6 Rear Panel ........................................................... 7 Speaker Connections ........................................ 9 Speaker impedance ............................................. 9 Wiring ................................................................ 10 Rack Mounting ................................................ 11 Specifications .................................................. 12 General Specifications ....................................... 12 Block Diagram ................................................... 13 Dimensions ........................................................ 14 Current Draw ..................................................... 14 Troubleshooting ............................................... 15 5 Controls and Functions ■ Front Panel 2 8 1 4 3 57 6 1 POWER switch and indicator 8 How to install the security cover (1) Use the supplied hex wrench to remove the four attachment screws from the amplifier. (2) Adjust the security cover to the position of screw holes. Fasten it into place using the same screws. Press to toggle the power on or off. The POWER indicator lights up green when the power is ON. 2 TEMP indicator Lights up red if the heat sink temperature exceeds 85°C (185°F). 3 PROTECTION indicator Lights up red to indicate that protection is in effect. Specifically, lights up if the heat sink overheats, or if a DC voltage is detected at the amplifier outputs. Also lights up for about three seconds at time of power-on, as the amp gets ready to operate. To provide protection, the unit will not output any sound from the speakers while this indicator is lit up. When start-up is completed or the problem is corrected, the indicator goes off and normal operation resumes. 4 CLIP indicator Lights up red when the output signal distortion on the corresponding channel rises above 1%—indicating that “clipping” has occurred because the signal level is too high. 5 SIGNAL indicator Lights up green when the corresponding channel’s output level exceeds 2 Vrms (equivalent to 1/2 W into an 8 Ω load, or 1 W into a 4 Ω load). 6 Volume control knobs Each control knob adjusts the volume of the corresponding channel, in 31 steps from –∞ dB to 0 dB. NOTE: If you wish to lock in the knob settings, you can fasten the supplied security cover over the knobs so that the settings will not be disturbed. 6 indicator 7 Lights up yellow if the YS PROCESSING switch on the rear panel is set ON. (See page 7.) 8 Air intakes The amplifier uses forced-air cooling. The cooling fans draw air in from the front and exhaust it through the rear. Please be sure that you do not block the air intakes or exhaust vents. NOTE: The fans do not come on at initial power-on, but will switch on automatically when the temperature of the heat sink rises above 50°C (122°F). The fan speed will then vary automatically as the temperature changes. ■ Rear Panel 12 SUB LOW CUT WOOFER OFF 5 SUB OFF WOOFER LOW CUT LOCK LOCK 3 90 ON OFF 50 Hz SPEAKERS 2 3 50 125 25 2 90 150 125 STEREO BRIDGE PARALLEL FREQUENCY 25 Hz 150 FREQUENCY INPUT 1+ 12+ 2- + 1+ - 1- - 1 + + (-) 1 + + - - (+) BRIDGE 43 1 FILTER switch and FREQUENCY adjustment knob (One pair for each channel) Use these controls to select the filter type and adjust the cutoff frequency on each channel (A and B). You use the FILTER switch to select the filter, as follows. SUB OFF WOOFER LOW CUT OFF ...................... Do not use any filter. SUBWOOFER..... Use a low-pass filter. The amplifier outputs the frequencies that are lower than the cutoff set by the FREQUENCY adjustment knob. LOW CUT ........... Use a high-pass filter. You can use this setting to filter out unneeded low or subsonic frequencies. If you select SUBWOOFER or LOW CUT, you can then use the FREQUENCY adjustment knob to adjust the cutoff frequency. The adjustment range is 25 Hz to 150 Hz. Cutoff frequency 6 ON/OFF switch 2 If you set this switch ON, the amplifier adds low-frequency compensation so as to enhance speaker output. The results (the actual change in the low-frequency balance) will vary according to the speaker type. Note that this switch is effective only if the FILTER switch is set to OFF. NOTE: This feature provides improved frequency reponse on speakers such as the YAMAHA S112 and S115. 3 INPUT jacks (Channels A, B) Two jack types are provided for each channel. Note that if you are using BRIDGE or PARALLEL mode, only the Channel A jacks are effective. • XLR-3-31 jack The XLR-3-31 input jacks are wired as shown below. hot ground 1 2 3 cold • Phone jack Phone jacks are wired as follows. ring (cold) 25 to 150Hz Hz 25Hz Hz-150 NOTE: If the amplifer is set to BRIDGE mode, only the switch and knob for Channel A are effective. (The Channel B frequency controls are disabled.) sleeve (ground) tip (hot) 7 4 STEREO/PARALLEL/BRIDGE switch Use this switch to select the operating mode. • STEREO mode Channels A and B operate independently (as with a conventional stereo amplifier). The Channel A input goes to the Channel A output jacks, and the Channel B input goes to the Channel B output jacks. • PARALLEL mode The Channel A input signal is output through both the Channel A and Channel B output jacks. The Channel B input jacks do not function. Channel A and B volumes can be independently adjusted. • BRIDGE mode The Channel A input signal is output from the BRIDGE output jacks. To adjust the volume, you must use the Channel A volume control knob. 5 SPEAKER jacks Neutrik NL4FC Speakon output connectors, 5-way binding post output jacks, Phone output jacks For minimum speaker impedenance values, see page 9. 6 GND terminal This is a screw-type ground terminal. If you are having a problem with hum or noise, use this terminal to connect to ground or to connect to the chassis of the mixer, preamp, or other device in your system. 8 Speaker Connections ■ Speaker impedance Speakers can be connected to the amplifier as shown below. Note that speaker impedance will vary according to the connection method and the number of speakers. Please be sure that your speakers’ impedance is not less than the relevant minimum value indicated below. Connection configurations for STEREO and PARALLEL modes Connection configurations for BRIDGE mode When using 5-way binding post output jacks When using 5-way binding post output jacks 1 - + + 1 1 - - + + 1 - STEREO BRIDGE PARALLEL STEREO BRIDGE PARALLEL (-) (-) (+) (+) BRIDGE BRIDGE or STEREO BRIDGE PARALLEL Minimum speaker impedance: 4Ω When using Speakon connector LOCK 8Ω 4Ω When using Speakon connector SPEAKERS LOCK 3 Minimum speaker impedance: Minimum speaker impedance: 2 2 1+ 12+ 2- + 1+ - 1- LOCK 3 3 + + - SPEAKERS LOCK 2 2 3 1+ 12+ 2- + 1+ - 1- + + - Minimum speaker impedance: Minimum speaker impedance: 8Ω 4Ω When using phone jack LOCK 3 LOCK 2 + 1+ - 1- SPEAKERS 2 3 1+ 12+ 2- + + - Minimum speaker impedance: 4Ω 9 ■ Wiring 5-way binding post Speakon connector (1) Turn off the POWER switch. (2) Remove the cover attachment screws and remove the protective cover from the speaker terminals. (1) Turn off the POWER switch. (2) Insert the Neutrik NL4FC plugs into the Speakon connector on the rear of the amplifier, and turn clockwise to lock. Neutrik NL4FC plugs CHANNEL A Screw (3) Remove about 15 mm of insulation from the end of each speaker cable, and pass the bare wire through the holes in the appropriate speaker terminals. Tighten the terminals to securely clamp the wires. Refer to page 9 for speaker polarities. STEREO or PARALLEL BRIDGE 1+ A+ 1+ 1– A– 1– 2+ B+ 2+ 2– B– 2– + – Neutrik NL4FC plugs CHANNEL B 1+ B+ 1– B– 15mm * Phone jack (1) Turn off the POWER switch. (2) Insert the phone plug into the jack on the rear of the amplifier. Speaker cable * Actual size Note to users in the USA: Please use Class 3 wiring. (P7000S, P5000S) Please use Class 2 wiring. (P3500S, P2500S) Be sure that the bare wire ends do not jut out from the terminals and touch the chassis. The following shows how the cable should look when correctly attached. Bare wire Chassis (4) Reattach the protective cover over the speaker terminals. 10 Rack Mounting Mounting in a standard EIA rack If you are mounting multiple power amplifiers in a rack, be sure to install ventilation panel(s) as shown below. Also be sure to use metal brackets (one on each side) to support the rear of each amplifer. Note: EIA stands for Electronic Industries Alliance. Ventilation panel(s) Use 1U-size blank panel(s). 44 480 Unit: mm If mounting up to four amplifiers in an open-backed rack Install a ventilation panel as shown below. Ventilation panel (Attach to the front or rear of the rack.) When mounting five or more amplifiers in an open-backed rack, and when mounting any number of amplifiers in a close-backed rack Install ventilation panels above and below each amplifier, as shown below. 11 Specifications ■ General Specifications Power Output Level (Rated Power) 1 kHz THD + N = 1% 8 Ω/STEREO 20 Hz – 20 kHz THD + N = 0.1% 1 kHz 20 ms non-clip Power Bandwidth Total Harmonic Distortion (THD + N) 20 Hz – 20 kHz, Half Power Frequency Response Intermodulation Distortion (IMD) 60 Hz:7 kHz, 4:1, Half Power Channel Separation Vol. max Residual Noise Vol. min. SN Ratio Damping Factor Input Sensitivity Voltage Gain Input Impedance Controls Connectors Indicators 4 Ω/STEREO 8 Ω/BRIDGE 700 W × 2 650 W × 2 (European Model) 950 W × 2 1900 W × 1 P5000S 525 W × 2 750 W × 2 1500 W × 1 P3500S 390 W × 2 590 W × 2 1180 W × 1 P2500S 275 W × 2 390 W × 2 780 W × 1 500 W × 2 350 W × 2 250 W × 2 700 W × 2 1400 W × 1 450 W × 2 900 W × 1 310 W × 2 620 W × 1 1300 W × 2 1000 W × 2 2 Ω/STEREO 1600 W × 2 2600 W × 1 2000 W × 1 4 Ω/BRIDGE 3200 W × 1 Half Power 10 Hz – 40 kHz (THD + N = 0.5 %) 4 Ω – 8 Ω/STEREO ≤ 0.1 % 8 Ω/BRIDGE RL = 8 Ω, Po = 1 W +0 dB, –1.5 dB 20 Hz – 50 kHz 4 Ω – 8 Ω/STEREO ≤ 0.1 % 8 Ω/BRIDGE Half Power RL = 8 Ω 1 kHz ≥ 70 dB input 600 Ω shunt 20 Hz – 20 kHz (DIN AUDIO) ≤ –70 dBu 20 Hz – 20 kHz (DIN AUDIO) 104 dB 103 dB 102 dB ≥ 350 ≥ 200 RL = 8 Ω, 1 kHz RL = 8 Ω +8.0 dBu +6.4 dBu +5.2 dBu (1 kHz, THD + N = 1 %) RL = 8 Ω 32 dB 30 kΩ/balanced, 15 kΩ/unbalanced Front Panel POWER switch (Push on/Push off) Two 31-step Volume control knobs (one per ch) Rear Panel MODE switch (STEREO/PARALLEL/BRIDGE) Two FILTER switches (SUBWOOFER/LOW CUT/OFF) Two fc knobs (25 to 150 Hz, 12 dB/octave) YS Processing switch (ON/OFF) INPUT XLR-3-31 jacks (one per ch) 1/4-inch TRS phone jacks (one per ch) OUTPUT Speakon jacks (one per ch) 5-way binding posts 1/4-inch phone jacks (one per ch) POWER × 1 (Green) × 1 (Red) PROTECTION TEMP × 1 (Red) (heatsink temp ≥ 85°C) CLIP SIGNAL YS Processing Load Protection 650 W × 2 1300 W × 1 100 dB +3.6 dBu × 2 (Red) × 2 (Green) × 1 (Yellow) POWER switch ON/OFF muting DC-fault power supply shutdown DC detection Temp. detection (heat sink temp ≥ 90°C), VI limiter (RL ≤ 1 Ω) Comp: THD ≥ 0.5 % Amp. Protection Limiter Cooling Power Requirements Power Consumption P7000S 750 W × 2 1100 W × 2 2200 W × 1 8 Ω/STEREO 4 Ω/STEREO 8 Ω/BRIDGE Idling Output power, 4 Ω Dimensions (W × H × D) Weight Included Accessories Dual variable-speed fan Single variable-speed fan 120 V, 220 V – 240 V; 50 Hz/60 Hz 35 W 35 W 30 W 25 W 650 W 500 W 450 W 320 W 480 × 88 × 456 mm (18-7/8" × 3-7/16" × 17-15/16") 12.0 kg (26.5 lbs) 15.0 kg (33.1 lbs) 14.0 kg (30.9 lbs) 12.0 kg (26.5 lbs) Security cover (with a hex wrench), Owner’s Manual 0 dBu=0.775 Vrms, Half Power=1/2 Power Output Level (Rated Power) Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. European models Purchaser/User Information specified in EN55103-1 and EN55103-2. Inrush Current: 25A (P7000S, P5000S)/66A (P3500S)/68A (P2500S) Conforms to Environments: E1, E2, E3 and E4 12 ■ Block Diagram P7000S, P5000S P3500S, P2500S HPF LPF BA State variable Active filter CHANNEL A ATT Ach Power Amp SPEAKERS Limiter 3 OFF Frequency [25 Hz-150 Hz] CHANNEL A [BRIDGE] [PARALLEL] 1+ SIGNAL YAMAHA SPEAKER PROCESSING 2- 2 Temperature Sensor (Heat Sink) ON OFF Protection Circuit 1 PROTECTION A+B BRIDGE TEMP YAMAHA SPEAKER PROCESSING 1 2+ CLIP SIGNAL CHANNEL B 2 12- BA State variable Active filter CHANNEL A 2+ INV INPUT 1- CLIP CHANNEL B ATT OFF PARALLEL BRIDGE STEREO Bch Power Amp CHANNEL B 1+ Limiter 3 LPF HPF Frequency [25 Hz-150 Hz] POWER POWER CIRCUIT POWER SW +B E -B +24 E -24 FAN 13 ■ Dimensions Unit: mm ■ Current Draw P7000S Line Current (A) 100/120V Power (W) 230/240V In Out Thermal Dissipation Dissipated Btu/h kcal/h standby 0.08 0.04 5 0 5 17 4 idle 1.0 0.5 35 0 35 119 30 1/8 power 1/3 power 8Ω/ch 5.4 3.0 379 188 191 653 165 4Ω/ch 8.5 4.7 611 275 336 1150 289 8Ω/ch 12.8 7.0 918 500 418 1430 360 4Ω/ch 20.6 11.3 1481 733 748 2550 643 P5000S Line Current (A) 100/120V Power (W) 230/240V In Out Thermal Dissipation Dissipated Btu/h kcal/h standby 0.08 0.04 5 0 5 17 4 idle 1.0 0.5 35 0 35 119 30 1/8 power 1/3 power 8Ω/ch 4.0 2.2 277 131 146 499 126 4Ω/ch 6.2 3.4 436 188 249 848 214 8Ω/ch 9.3 5.1 673 350 323 1100 278 4Ω/ch 14.7 8.1 1057 500 557 1900 479 P3500S Line Current (A) 100/120V In Out Thermal Dissipation Dissipated Btu/h kcal/h standby 0.08 0.04 5 0 5 17 4 idle 1.0 0.5 30 0 30 102 26 1/8 power 1/3 power 14 Power (W) 230/240V 8Ω/ch 3.2 1.7 227 98 130 443 112 4Ω/ch 5.0 2.8 378 148 231 787 198 8Ω/ch 7.3 4.0 551 260 291 993 250 4Ω/ch 12.2 6.7 917 393 524 1790 450 P2500S Line Current (A) 100/120V Power (W) 230/240V In Out Thermal Dissipation Dissipated Btu/h kcal/h standby 0.08 0.04 5 0 5 17 4 idle 1.0 0.5 25 0 25 85 22 8Ω/ch 2.4 1.3 174 69 105 358 90 4Ω/ch 3.6 2.0 271 98 173 592 149 8Ω/ch 5.6 3.1 421 183 238 811 204 4Ω/ch 8.8 4.8 657 260 397 1350 341 1/8 power 1/3 power 1/8 power is typical of program material with occasional clipping. Refer to these figures for most applications. 1/3 power represents program material with extremely heavy clipping. Test signal: Pink Noise, bandwidth limited from 22Hz to 22kHz 1W = 0.860kcal/h, 1BTU = 0.252kcal Note that Line Voltage [V] x Line Current [A] = [VA], not equals to [W]. Inrush current P7000S, P5000S: 11A (100V), 13A (120V), 25A (240V) P3500S: 142A (100V), 170A (120V), 66A (240V) P2500S: 103A (100V), 150A (120V), 68A (240V) Troubleshooting The following table lists the main causes of abnormal operation and the corrective measures required, as well as the protective circuit operation in each case. Indicator(s) Possible Cause Remedy Protection Circuit There is a short at a speaker terminal, amplifier terminal, or wire. Locate and correct the cause of the short. TEMP indicator lights. The heat sink temperature has exceeded 85°C (185°F). Check the ventilation slots, and provide better airflow around the amplifier. PROTECTION indicator lights. The heat sink temperature has exceeded 95°C (203°F). Check the amplifier ventilation The thermal protection circuit conditions and take appropriate operates to protect the power measures to improve the transistors. airflow around the amplifier. CLIP indicator lights. The PC limiter circuit operates Use a speaker system with an to protect the power transistors. impedance of at least 4 Ω The amplifier load is excessive. (STEREO/PARALLEL mode) or 8 Ω (BRIDGE mode). The TEMP indicator lights up to indicate temperature warning. P3500S, P2500S Indicator(s) PROTECTION indicator lights. Possible Cause Remedy Protection Circuit A DC voltage of ±2 V or greater Consult your dealer or the The relay operates to protect was generated in the power nearest Yamaha service center. the speaker system. amplifier’s output circuit. P7000S, P5000S Indicator(s) Power has been shut down. (All indicators are off.) Possible Cause A DC voltage of ± 2 V or greater was generated in the power amplifier’s output circuit. Remedy Protection Circuit The protection circuitry shut off Consult your dealer or the the power to protect the nearest Yamaha service center. speaker system. 15 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, México, D.F., C.P. 03900 Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi, CEP 04534-013 São Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A., Sucursal Argentina Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK Buenos Aires, Argentina Tel: 011-4119-7000 VENEZUELA Yamaha Music Latin America, S.A., Sucursal Venezuela C.C. Manzanares Plaza P4 Ofic. 0401- Manzanares-Baruta Caracas Venezuela Tel: 58-212-943-1877 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso No.7, Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, República de Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K. Tel: 01908-366700 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 044-387-8080 AUSTRIA/BULGARIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria (Central Eastern Europe Office) Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 POLAND/LITHUANIA/LATVIA/ESTONIA Yamaha Music Europe GmbH Branch Poland Office ul. Wrotkowa 14 02-553 Warsaw, Poland Tel: 022-500-2925 PA37 Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. MALTA ASIA Olimpus Music Ltd. The Emporium, Level 3, St. Louis Street Msida MSD06 Tel: 02133-2144 THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 400-051-7700 NETHERLANDS/BELGIUM/ LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, Netherlands Tel: 0347-358 040 INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon, Haryana, India Tel: 0124-485-3300 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activites Pariest, 77183 Croissy-Beaubourg, France Tel: 01-64-61-4000 INDONESIA PT. Yamaha Musik Indonesia (Distributor) Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 ITALY Yamaha Music Europe GmbH, Branch Italy Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 KOREA SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17,200, 28231 Las Rozas (Madrid), Spain Tel: +34-91-639-88-88 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, N-1361 Østerås, Norway Tel: 67 16 78 00 RUSSIA Yamaha Music (Russia) LLC. Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA Yamaha Music Gulf FZE Office JAFZA 16-512, P.O.Box 17328, Jebel Ali - Dubai, UAE Tel: +971-4-881-5868 MIDDLE EAST TURKEY Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi Maslak Meydan Sokak No:5 Spring Giz Plaza Bağımsız Böl. No:3, 34398 Şişli İstanbul Tel: +90-212-999-8010 CYPRUS Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 Yamaha Music (Malaysia) Sdn., Bhd. No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 TAIWAN Yamaha Music Europe GmbH, Tyskland – filial Denmark Generatorvej 8B, DK-2730 Herlev, Denmark Tel: 44 92 49 00 NORWAY MALAYSIA Yamaha Music (Asia) Private Limited Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore Tel: 65-6747-4374 Yamaha Music Europe GmbH Germany filial Scandinavia JA Wettergrensgata 1, Västra Frölunda, Sweden Tel: +46 31 89 34 00 DENMARK Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 SINGAPORE SWEDEN/FINLAND/ICELAND GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Yamaha Music & Electronics Taiwan Co.,Ltd. 3F, No.6, Section 2 Nan-Jing East Road, Taipei, Taiwan R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 3, 4, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 VIETNAM Yamaha Music Vietnam Company Limited 15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3, Ho Chi Minh City, Vietnam Tel: +84-8-3818-1122 OTHER ASIAN COUNTRIES Yamaha Corporation Sales & Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Sales & Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OTHER COUNTRIES Yamaha Music Gulf FZE Office JAFZA 16-512, P.O.Box 17328, Jebel Ali - Dubai, U.A.E Tel: +971-4-881-5868 HEAD OFFICE Yamaha Corporation, Audio Products Sales and Marketing Division Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Yamaha Pro Audio global web site http://www.yamahaproaudio.com/ Yamaha Manual Library http://www.yamaha.co.jp/manual/ C.S.G., Pro Audio Division © 2003-2014 Yamaha Corporation WB09700 409CRZCx.x-01G0 Printed in Indonesia
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Yamaha P3500S El manual del propietario

Categoría
Sintetizador
Tipo
El manual del propietario
Este manual también es adecuado para