Avanti EWC1201 Guía de instalación

Marca: Avanti

Modelo: EWC1201

Categoría: Enfriadores de bebidas

Tipo: Guía de instalación

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

Model Numbers / No. de Modelos:

EWC801-IS / EWC1201

WINE CHILLER / VINERA

EWC801-IS

EWC1201

(Image may vary)

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

La sección en español empieza en la página 12.

Avanti Products has a policy of continuous improvement on its products and reserves the right to change materials and

specifications without notice.

Avanti Products LLC

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

Help Us Help You

Parts and Features

Important Safety Instructions

Installation Instructions

Before Using Your Wine Chiller

Installation of Your Wine Chiller

Electrical Connection

Extension Cord

Operating Your Wine Chiller

Temperature Control

Storage Capacity

Interior Light

Care and Maintenance

Cleaning Your Wine Chiller

Power Failure

Moving Your Wine Chiller

Energy Saving Tips

Troubleshooting Guide

Service for Your Appliance

Wiring Diagram

Your Avanti Products Warranty

Instrucciones en Español

12 – 14

Registration Information and Registration Card

HELP US HELP YOU...

Read this guide carefully.

It is intended to help you operate and maintain

your new Wine Chiller properly.

Keep it handy to answer your questions.

If you don't understand something or you

need more assistance, please call:

Avanti Customer Service

800-220-5570

Keep proof of original purchase date (such as

your sales slip) with this guide to establish the

warranty period.

Write down the model and serial numbers.

You'll find them on a plate located on the rear

outside wall of the Wine Chiller.

Please write these numbers here:

____________________________________

Date of Purchase

____________________________________

Model Number

____________________________________

Serial Number

Use these numbers in any correspondence or

service calls concerning your Wine Chiller.

If you received a damaged Wine Chiller,

immediately contact the dealer (or builder) that

sold you the Wine Chiller.

Save time and money. Before you call for

service, check the Troubleshooting Guide. It

lists causes of minor operating problems that

you can correct yourself.

IF YOU NEED SERVICE

We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further assistance.

FIRST, contact the people who serviced your

Wine Chiller. Explain why you are not pleased.

In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the

details, including your telephone number, and

send it to:

Customer Service

Avanti Products

10880 NW 30 Street

Miami, FL 33172 USA

CAUTION:

THIS WINE CHILLER IS NOT

DESIGNED FOR THE STORAGE

OF MEDICINE OR OTHER

MEDICAL PRODUCTS.

PARTS & FEATURES

EWC801-IS

Cabinet

Leveling legs

Vertical Shelf Assembly

Upper Door Hinge w/ Cover

Cold sink fan

Glass Door

Cold sink Fan Cover

Gasket

Ventilation Holes

Bottom hinge

EWC1201

Cabinet

Leveling legs

Shelf(Total 2)

Upper Door Hinge w/ Cover

Cold sink fan

Glass Door

Cold sink Fan Cover

Gasket

Ventilation Holes

Bottom hinge

Vertical Shelf Assembly

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock,

or injury when using your appliance, follow

these basic precautions:

• Read all instructions before using the Wine Chiller.

• DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or abandoned

appliances are still dangerous . . . even if they will “just sit in the garage a few days”.

• Before you throw away your old Wine Chiller: Take off the door. Leave the

shelves in place so that children may not easily climb inside.

• Never allow children to operate, play with, or crawl inside the appliance.

• Never clean appliance parts with flammable fluids. The fumes can create a fire

hazard or explosion.

• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity

of this or any other appliance. The fumes can create a fire hazard or explosion.

• Do not repair or replace any part of the wine chiller or attempt any servicing unless

specifically recommended in the user-maintenance instructions or in published user-

repair instructions. Replace the fuse with the same type.

-Save these instructions-

INSTALLATION INSTRUCTIONS

 Before Using Your Wine Chiller

• Remove the exterior and interior packing.

• Check to be sure you have all of the following parts:

Model EWC801-IS

Model EWC1201

(1) Vertical Shelf Assembly:

(4) Vertical Bottles / (4) Bottles Horizontal

(2) Standard Horizontal Shelves

(1) Vertical shelf Assembly

(4) Vertical Bottles / (4) Bottles Horizontal

(1) Instruction Manual

• Clean the interior surface with lukewarm water using a soft cloth.

 Installation of Your Wine Chiller

• This Wine Chiller is designed to be free standing installation only, and should not be recessed or

built-in (Fully recessed).

• Place your Wine Chiller on a surface that is strong enough to support it when it is fully loaded.

• Allow 5 inches of space between the back and sides of the wine chiller, which allows the proper

air circulation to cool the heat sink.

• Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator,

etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Extreme cold ambient temperatures may also cause the unit not to perform

properly.

• This Wine Chiller uses thermoelectric refrigeration technology (no compressor) and is not

designed for storage in hot areas like garages, warehouses or outdoors since it is designed to

operate at a maximum of 30 degrees below the ambient temperature.

• Avoid locating the unit in moist areas.

• Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified electrician or an

authorized Avanti Products service center.

• After plugging the Wine Chiller into a wall outlet, allow the unit to cool down for 2-3 hours before

placing any items in the compartment.

 Electrical Connection

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Do not under any circumstances cut or remove the third ground prong from the power cord supplied.

For personal safety, this appliance must be properly grounded.

This appliance requires a standard 115 Volt AC / 60Hz electrical ground outlet with three-prong. Have

the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly

grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation

to have it replaced with a properly grounded 3-prong wall outlet.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

The appliance should always be plugged into its own individual electrical outlet which has a voltage

rating that matches the rating label on the appliance. This provides the best performance and also

prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never

unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from

the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise

damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the appliance, be careful not to damage the power cord.

 Extension Cord

Because of potential safety hazards under certain conditions, it is strongly recommended that you do

not use an extension cord with this appliance. However, if you must use an extension cord it is

absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord

having a grounding type plug and outlet and that the electrical rating of the cord be 300 volts and at

least 10 amperes.

Warning

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is

damaged, have it replaced by an authorized Avanti Products service center.

OPERATING YOUR WINE CHILLER

It is recommended you install the Wine Chiller in a place where the ambient temperature is between

23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the

performance of the unit may be affected. For example, placing your unit in extreme cold or hot

conditions may cause interior temperatures to fluctuate. The range of 9º-18ºC/48º-64ºF may not be

reached.

Recommended Temperatures for Chilling Wine.

Red Wines

14º - 18º C

57– 64º F

Dry/White Wines

9º - 14º C

48 – 58º F

Rose Wines

10º - 11º C

51 – 53º F

Temperature Ranges For Your Wine Chiller

Temperature Range

9 - 18º C

48 – 64º F

CONTROL PANEL

 SETTING THE TEMPERATURE CONTROL

 Your Wine Cellar has been equipped with an “automatic” control panel lock, that will activate 12

seconds after the last time a button has been touched.

Push the and button simultaneously for 3 seconds to unlock the control panel. You will

hear a “BEEP” sound to alert you that the control is now active.

 You can set the temperature as you desire by pushing the or button on the control

panel for each zone. The temperature that you desire to set will increase 1ºF or 1ºC if you push

the button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the

button once.

 When you store mostly red wines, the temperature needs to be set at between 14º - 18ºC (57º -

64ºF). The indicator marked “R” will light up in Red.

 When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC (48º -

58ºF). The indicator marked “W” will light up in White.

 NOTE:

• When you use the wine chiller for the first time or restart the wine chiller after having been shut off

for a long time, there could be a few degrees variance between the temperature you select and

the one indicated on the LED readout. This is normal and it is due to the length of the activation

time. Once the wine chiller is running for a few hours everything will be back to normal.

You can select temperature display setting from Fahrenheit to Celsius degree by pushing

this button. (Fahrenheit or Celsius indicator will appear in green color) The degrees

will appear in blue color in the temperature display window.

 Storage Capacity

Model EWC801-IS: You can place 8 standard bottles in this wine chiller

Model EWC1201: You can place 12 standard bottles or 4 standard bottles and 8 burgundy bottles in

this wine chiller.

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary. Bottle capacities are approximate maximums when storing traditional Bordeaux

750ml bottles and include bulk storage.

 Interior Light

Push the and button simultaneously for 3 seconds to unlock the control panel. You will

hear a “BEEP” sound to alert you that the control is now active.

You can turn the interior light ON or OFF by pushing the button marked with the “Light” symbol

The light will be turned off automatically if it remains ON for 10 minutes. You have to push the button

marked with the “Light” symbol

again and the light will turn back on.

CARE AND MAINTENANCE

 Cleaning Your Wine Chiller

• UNPLUG the Wine Chiller, and remove all items including shelves.

• Wash the inside surfaces with a warm water and baking soda solution. The solution should be

about 2 tablespoons of baking soda to a quart of water.

• Wash the shelves with a mild detergent solution.

• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any

electrical parts.

• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with

a clean soft cloth.

CAUTION

Failure to unplug the Wine Chiller could result in electrical shock or personal injury.

 Power Failure

• Most power failures are corrected within a few hours and should not affect the temperature of

your appliance if you minimize the number of times the door is opened. If the power is going to be

off for a longer period of time, you need to take the proper steps to protect your contents.

 Moving Your Wine Chiller

• Remove all bottles.

• Securely tape down all loose items (shelves) inside your appliance.

• Tape the door shut.

• Protect outside of appliance with a blanket, or similar item.

 Energy Saving Tips

• The Wine Chiller should be located in the coolest area of the room, away from heat producing

appliances, and out of the direct sunlight.

• One characteristic of thermoelectric units is the length of time it requires to recover from having

the door opened and shut frequently. It may be necessary to wait longer for the temperature to

return to its former level once the door has been opened for too long. This is normal for this type

of unit.

PROBLEMS WITH YOUR WINE CHILLER?

You can solve many common Wine Chiller problems easily, saving you the cost of a possible service

call. Try the suggestions below to see if you can solve the problem before calling the servicer.

TROUBLESHOOTING GUIDE

PROBLEM

POSSIBLE CAUSE

Wine Chiller does not operate.

Not plugged in.

The circuit breaker tripped or a blown fuse.

Control panel is locked

Push the and button simultaneously for

3 seconds to unlock the control panel.

Wait for beep sound.

Wine Chiller is not cold enough.

Check the temperature control setting.

External environment may require a higher

setting.

The door is opened too often.

The door is not closed completely.

The door gasket does not seal properly.

The Wine Chiller does not have the correct

clearances.

Abnormal voltage.

The light does not work.

Not plugged in.

The circuit breaker tripped or a blown fuse.

The light button is “OFF”.

Vibrations.

Check to assure that the Wine Chiller is level.

The door will not close properly.

The Wine Chiller is not level.

The door was not properly installed.

The gasket is dirty.

The shelves are out of position.

SERVICE FOR YOUR WINE CHILLER

We are proud of our customer service organization and the network of professional service

technicians that provide service on your Avanti appliances. With the purchase of your Avanti

appliance, you can have the confidence that if you ever need additional information or assistance, the

Avanti Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

Product Information

800-323-5029

Whatever your questions are about our products,

help is available.

Part Orders

800-220-5570

You may order parts and accessories that will be

delivered directly to your home by personal

check, money order, Master Card, or Visa.

In-Home Repair Service

800-220-5570

An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your appliance inside and out.

WIRING DIAGRAM

TECHNICAL / ELECTRICAL SPECIFICATIONS

Rated Voltage

115V

Rated Frequency

60Hz

Rated Input Power

65W

YOUR AVANTI PRODUCTS

WARRANTY

Staple your sales receipt here. Proof of original

purchase date is needed to obtain service under

warranty.

WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY

Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of

twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run upon

the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever unless

described in detail in the warranty document. For one year from the date of purchase by the original owner,

Avanti products will, at its option, repair or replace any part of the product which proves to be defective in

material or workmanship under normal use. Avanti Products will provide you with a reasonably similar product

that is either new or factory refurbished. During this period Avanti Products will provide all parts and labor

necessary to correct such defects free of charge, so long as the product has been installed and operated in

accordance with the written instructions in this manual. In rental or commercial use, the warranty period is 90

days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service

center for repair.

WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:

The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti

Products, including without limitation, one or more of the following:

•

A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,

regulations, or laws, including failure to install the product in strict conformity with local fire and building codes

and regulations.

• Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind, sand,

floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to humidity,

lightning, power surges, structural failures surrounding the appliance, and acts of God.

•

Content losses of food or other content due to

spoilage.

• Incidental or consequential damages

• Parts and labor costs for the following will not be

considered as warranty:

• Evaporator doors, door springs, and/or frames.

• Inner door panels, door shelves, door rails,

and/or door supports.

• Chest freezer lid liners.

• Vegetable crispers.

• Light bulbs and/or plastic housing.

• Plastic cabinet liners.

• Punctured evaporator that voids the warranty on

the complete sealed system.

• Shipping and handling costs associated with the

replacement of the unit.

• Repairs performed by unauthorized servicers.

• Service calls that are related to external problems,

such as abuse, misuse, inadequate electrical

power, accidents, fire, floods, or any other acts of

God.

• Failure of the product if it is used for other than it

intended purpose.

• The warranty does not apply outside the

Continental USA.

• Surcharges including but not limited to, any after

hour, weekend, or holiday service calls, tolls, ferry

trip charges, or mileage expense for service calls to

remote areas.

In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding

property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also

excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external surfaces

and exposed parts; Products on which the serial numbers have been altered, defaced or removed; service visits

for customer education, or visits where there is nothing wrong with the product; correction of installation problems

(you are solely responsible for any structure and setting for the product, including all electrical, plumbing and/or

other connecting facilities, for proper foundation/flooring, and for any alterations including without limitation

cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.

OUT OF WARRANTY PRODUCT

Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including

repairs, pro-rates, or product replacement, once this warranty has expired.

WARRANTY – REFRIGERATION – NON COMPRESSOR

INSTRUCCIONES DE SEGURIDAD

ATENCION

INSTRUCCIONES PARA

LA CONEXION A TIERRA

Este aparato electrodoméstico debe estar conectado a tierra. En caso de un cortocircuito eléctrico, la

conexión a tierra reduce el riesgo de choque eléctrico proporcionando un cable a tierra con una

enchufe de conexión a tierra. Este enchufe debe estar conectado en un tomacorriente instalado

correctamente y conectado a tierra.

ADVERTENCIA – El uso inadecuado del enchufe de conexión a tierra puede resultar en un riesgo de

choque eléctrico. Consulte con un electricista o persona de reparaciones competente si no

comprenden bien las instrucciones de conexión a tierra o si existe alguna duda sobre si el aparato

esta conectado a tierra correctamente.

NO USE UN CORDON DE

PROLONGACION ELECTRICA

Use un tomacorriente de pared exclusivo. No conecte su vinera a cordones de prolongación eléctrica

o junto a cualquier otro electrodoméstico en el mismo tomacorriente de pared.

ADVERTENCIA IMPORTANTE:

Una vinera vacía es una atracción muy peligrosa para los niños. Saque todas las juntas, pestillos,

tapas o puerta de todo electrodoméstico que no esté en uso, o tome alguna medida para asegurar

que no presente peligro.

INSTRUCCIONES DE INSTALACION

Saque los embalajes exteriores, limpie bien el exterior con un paño suave seco, y el interior con un

paño húmedo y tibio. Evite colocar la vinera cerca de una fuente de calor, luz de sol directa, o lugar

húmedo.

Ubicación

1. Seleccione un lugar con su piso fuerte y nivelado.

2. Deje cinco pulgadas de espacio entre la parte posterior de la vinera y toda pared contigua.

3. Las bodegas thermoelectrica necesitan cierto tiempo de recuperación cuando la puerta se

abre y se deja abierta por mucho tiempo. Esto es normal para este tipo de unidad.

4. Evite la luz directa del sol o calor. La luz directa del sol puede afectar la capa de acrílico.

Las fuentes de calor en su proximidad provocarán un consumo mayor de electricidad.

5. Para un mejor desempeño, nivele la vinera utilizando las patas ajustables o tornillos

niveladores.

OPERACION

Para evitar vibraciones, el compartimiento interior debe estar bien nivelado. La temperatura variará

dependiendo de la cantidad de botellas almacenadas y la frecuencia con que se abre la puerta.

Cuando la vinera no se use por un período largo, desconecte el enchufe y deje la puerta entreabierta.

CONTROL DE TEMPERATURA:

Se recomienda que Ud coloque su vinera en un lugar donde la temperatura ambiental se mantenga

entre 23º-26ºC / 72º-78ºF.

Si la temperatura ambiental oscila fuera de esos límites, pueda afectar la temperatura de la unidad.

Por ejemplo, si su unidad está situada en lugares donde hay temperaturas muy frías o calientes

también puede afectar la temperatura de la unidad y no alcanzará los límites 9º-18ºC/48º-64ºF).

Temperaturas recomendadas para enfriar vinos:

Vinos rojos

14º - 18º C

57 – 64º F

Vinos blancos

9º - 14º C

48 – 58º F

Vinos tintos

10º - 11º C

51 – 53º F

Rango de Temperatura de su vinera

Rango De Temperatura

9 - 18º C

48 – 64º F

Panel de controles

Control de temperatura

El panel de control de su vinera se anulará automáticamente 12 segundos después que cualquier

botón haya sido presionado.

Para activar el panel de control de su vinera, presione simultaneamente los botones marcados

y por 3 segundos. Espere por el sonido.

Ud. se puede seleccionar la temperatura preferida presionando los botones marcados

▲ o ▼. Cuando Ud. presione uno de los dos botones por primera vez la temperatura

seleccionada originalmente en la factoría aparecerá en la pantalla. (12ºC / 54ºF).

La temperatura que Ud. selecciona subirá 1ºC/F cada vez que presione el botón marcado

▲ al

contrario la temperatura bajará 1ºC/F cada vez que presione el botón marcado

AVISO:

Cuando Ud. encienda su vinera por primera vez o después de un largo tiempo de estar apagado,

habrá una diferencía entre la temperatura que Ud. selecciona y la temperatura indicada en la pantalla

digital. Este situación es normal debido al tiempo de que estuvo apagado. En cuanto la unidad esté

encendida por un par de horas la temperatura volverá a su nivel normal.

Luz interior

Para activar el panel de control de su vinera, presione simultáneamente los botones marcados

y por 3 segundos. Espere por el sonido.

Ud. puedes encender o apagar la luz interior presionando el botón marcado . La luz interior se

apagará automáticamente si está encendida por 10 minutos seguidos. Ud. necesita presionar el

botón de nuevo para encender la luz.

CUIDADO Y MANTENIMIENTO

Capacidad

Modelo: EWC801-IS: 8 botellas de tamaño normal (standard)

Modelo: EWC1201: 12 botellas de tamaño normal (standard)

El tamaño de las botellas pueden variar y afectará la cantidad de botellas que Ud. puede

almacenar.

Limpieza

Para limpiar el interior, use un paño suave con una solución de una cucharada de bicarbonato de

sodio por cada cuarto de agua, o una solución de espuma de jabón suave, o un detergente suave.

Para lavar las rejillas, sáquelas deslizándolas con cuidado, y use una solución de detergente suave;

luego séquelas con un paño suave. Limpie el exterior con un paño húmedo suave y un poco de

detergente suave o productos de limpieza para electrodomésticos.

Corte de corriente

La mayoría de los cortes de corriente se corrigen en una o dos horas y no afectarán las temperaturas

de su vinera. Sin embargo, Ud. deberá reducir la cantidad de veces que abra la puerta cuando la

corriente esté apagada. Durante los cortes de corriente de larga duración, tome medidas para

proteger sus botellas de vino.

Si Ud. se muda

Saque o asegure todos los artículos dentro de su vinera. Para evitar que los tornillos nivelantes se

averíen, gírelos completamente hacia la base.

Algunas reglas importantes para el uso correcto de la vinera.

• Las bebidas deben guardarse en botellas cerradas.

• No sobrecargue el compartimiento interior.

• No abra la puerta a menos que sea necesario.

Nunca cubra los estantes del compartimiento para vinos con papel de aluminio o cualquier

otro material para cubrir estantes que puedan obstruir la circulación del aire

Registration Information

Thank you for purchasing this fine Avanti product. Please fill out this form and return it to the

following address within 100 days from the date of purchase and receive these important benefits:

Avanti Products LLC

P.O.Box 520604 – Miami, Florida 33152

 Protect your product:

We will keep the model number and date of purchase of your new Avanti product on file to

help you refer to this information in the event of an insurance claim such as fire or theft.

 Promote better products:

We value your input. Your responses will help us develop products designed to best meet

your future needs.

-------------------------------------------------------(detach here)--------------------------------------------------------------

---

Avanti Registration Card

Name

Model # Serial #

Address

Date Purchased Store / Dealer Name

City State Zip

E-mail Address

Area Code Phone Number

Occupation

Did You Purchase An Additional Warranty

As your Primary Residence, Do You:

 Extended

 Own  Rent

 None

Your Age:

Reason for Choosing This Avanti Product:

Please indicate the most important factors

That influenced your decision to purchase

this product:



under 18



18-25



26-30

 31-35  36-50  over 50

Marital Status:

 Married  Single



Price

 Product Features

 Avanti Reputation

 Product Quality

 Salesperson Recommendation

 Other: ___________________

 Friend / Relative Recommendation

 Warranty

 Other: ___________________

Is This Product Used In The:

 Home  Business

How Did You Learn About This Product:

 Advertising

 In-Store Demo

 Personal Demo

Comments:

EWC801-IS/EWC1201 – 0508/2012

PRINTED IN CHINA

Avanti EWC1201 Guía de instalación

Marca: Avanti

Modelo: EWC1201

Categoría: Enfriadores de bebidas

Tipo: Guía de instalación

Descargar PDF

informe

en otros idiomas

English: Avanti EWC1201 Installation guide

Avanti EWC1201 Guía de instalación

Avanti EWC1201 Guía de instalación

en otros idiomas

Artículos relacionados