Puls POE.8AT-DC1 POE Power Supply Manual de usuario

Categoría
Juguetes
Tipo
Manual de usuario
Headquarters: PULS GmbH, Elektrastr. 6, 81925 Munich, Germany, www.pulspower.com
Germany
+49 89 9278 0
China
+86 512 62881820
France
+33 478 668 941
North America
+1 630 587 9780
Au
stria
+43 2764 3213
Singapore
Switzerland
+41 56 450 18 10
U
nited Kingdom
+44 15
25 841001
The information in this document is believed to be accurate and reliable and may change without notice.
EN POE.8AT-DC1 Installation Manual PoE Injector 48-56V, 8x 30W
DE POE.8AT-DC1 Installationsanleitung PoE Injektor 48-56V, 8x 30W
FR POE.8AT-DC1 Manuel d'installation Injecteur PoE 48-56V, 8x 30W
ES POE.8AT-DC1 Manual de instalación Inyector PoE 48-56V, 8x 30W
IT POE.8AT-DC1 Manuale di Installazione Injector PoE 48-56V, 8x 30W
PT POE.8AT-DC1 Manual de instalação Injetor PoE 48-56V, 8x 30W
Doc. ID: PU-445.015.10-xxZ (2022-02-17-AM2)
Read this first! English Vor Inbetriebnahme lesen! Deutsch
Before operating this device, please read this manual thoroughly and retain this manual for
future reference! This device may only be installed and put into operation by qualified
personnel. If damage or malfunction should occur during operation, immediately turn power
off and send device to the factory for inspection. The device does not contain serviceable
parts. The information presented in this document is believed to be accurate and reliable and
may change without notice. For any clarifications the English translation will be used.
Bitte lesen Sie diese Warnungen und Hinweise sorgfältig durch, bevor Sie das Gerät in Betrieb
nehmen. Bewahren Sie die Anleitung zum Nachlesen auf. Das Gerät darf nur durch
fachkundiges und qualifiziertes Personal installiert werden. Bei Funktionsstörungen oder
Beschädigungen schalten Sie sofort die Versorgungsspannung ab und senden das Gerät zur
Überprüfung ins Werk. Das Gerät beinhaltet keine Servicebauteile. Die angegebenen Daten
dienen allein der Produktbeschreibung und sind nicht als zugesicherte Eigenschaften im
Rechtssinne aufzufassen. Im Zweifelsfall gilt der englische Text.
WARNING Risk of electrical shock, fire, personal injury, or death: WARNUNG Missachtung nachfolgender Punkte kann einen elektrischen
Schlag, Brände, schwere Unfälle oder Tod zur Folge haben:
- Turn power off before working on the device. Protect against inadvertent re-powering.
- Do not open, modify or repair the device.
- Use caution to prevent any foreign objects from entering the housing.
- Do not use in wet locations or in areas where moisture or condensation can be expected.
- Do not touch during power-on and immediately after power-off. Hot surfaces may cause
burns.
- Schalten Sie die Eingangsspannung vor Installations-, Wartungs- oder Änderungsarbeiten
ab und sichern Sie diese gegen unbeabsichtigtes Wiedereinschalten.
- Führen Sie keine Änderungen oder Reparaturversuche am Gerät durch. Gerät nicht öffnen!
- Verhindern Sie das Eindringen von Fremdkörpern, wie z.B. Büroklammern und Metallteilen.
- Betreiben Sie das Gerät nicht in feuchter Umgebung oder in einer Umgebung, bei der mit
Betauung oder Kondensation zu rechnen ist.
- Gehäuse nicht während des Betriebes oder kurz nach dem Abschalten berühren. Heiße
Oberflächen können Verletzungen verursachen.
A lire avant mise sous tension! Français Lea primero! Español
Veuillez lire ces instructions de montage et d'entretien avant de mettre l'alimentation sous
tension. Conservez ce manuel qui vous sera toujours utile. Cette alimentation ne doit être
installée que par du personnel qualifié et compétent. En cas de dommage ou
dysfonctionnement, coupez immédiatement la tension d’alimentation et retournez l’appareil à
l’usine pour vérification. ! L’alimentation ne contient pas de pièces échangeables Les
données indiquées dans ce document servent uniquement à donner une description du
produit et n'ont aucune valeur juridique. En cas de divergences, le texte anglais fait foi.
Conserve este manual como referencia para futuras consultas. La fuente de alimentación solo
puede ser instalada y puesta en funcionamiento por personal cualificado. Por favor lea
detenidamente este manual antes de conectar la fuente de alimentación. Si se produce un fallo
o mal funcionamiento durante la operación, desconecte inmediatamente la tensión de
alimentación. En ambos casos, el equipo debe ser inspeccionado en fábrica. La información
presentada en este documento es exacta y fiable en cuanto a la descripción del producto y
puede cambiar sin aviso. En casa de duda, prevalece el texto inglés.
AVERTISSEMENT Prendre en compte les points suivants, afin
d'éviter toute détérioration électrique, incendie,
dommage aux personnes ou mort: ADVERTENCIA Riesgo de descarga eléctrica, incendio, accidente
grave o muerte:
- Mettre l’alimentation hors tension avant toute intervention sur celle-ci et s'assurer qu'il n'y
a pas risque de redémarrage.
- Ne pas ouvrir, modifier ou réparer l'alimentation.
- Veiller à ce qu'aucun objet ne rentre en contact avec l'intérieur de l'alimentation
(trombones, pièces métalliques).
- Ne pas faire fonctionner l'appareil dans un environnement humide ou dans un
environnement où il peut y avoir de la condensation.
- Ne pas toucher le carter pendant le fonctionnement ou directement après la mise hors
tension. Surface chaude risquant d’entraîner des blessures.
- Desconectar la tensión de red antes de trabajar en la fuente de alimentación. Evite una
posible reconexión involuntaria.
- No realizar ninguna modificación o reparación de la unidad. No abrir la unidad.
- Evitar la introducción en la carcasa de objetos extraños.
- No usar el equipo en ambientes húmedos. No operar el equipo en ambientes donde se
espere la formación de rocío o condensación.
- No tocar durante el funcionamiento ni inmediatamente después del apagado. El calor de la
superficie puede causar quemaduras graves.
Leggere prima questa parte! Italiano Leia primeiro! Portuguès
Prima di collegare il sistema di alimentazione elettrica si prega di leggere attentamente le
seguenti avvertenze. Conservare le istruzioni per la consultazione futura. Il sistema di
alimentazione elettrica deve essere installato solo da personale competente e qualificato. Se
durante il funzionamento si verificano anomalie o guasti, scollegare immediatamente la
tensione di alimentazione. In entrambi i casi è necessario far controllare l'apparecchio dal
produttore! I dati sono indicati solo a scopo descrittivo del prodotto e non vanno considerati
come caratteristiche garantite dell'apparecchio. In caso di differenze o problemi è valido il
testo inglese
Recomendamos a leitura cuidadosa das seguintes advertências e observações, antes de
colocar em funcionamento a fonte de alimentação. Guarde as Instruções para futura consulta,
em casos de dúvida. A fonte de alimentação deverá ser instalada apenas por profissionais da
área, tecnicamente qualificados. Se por acaso, durante a utilização ocorrer algum defeito de
funcionamento ou dano, desligue imediatamente a tensão de alimentação. Em ambos os casos,
será necessária uma verificação na Fábrica! Os dados mencionados têm como finalidade
somente a descrição do produto, e não devem ser interpretados como propriedades garantidas
no sentido jurídico. Em caso de duvidas aplica-se o texto em inglês.
AVVERTENZA Il mancato rispetto delle seguenti norme p
provocare folgorazione elettrica, incendi, gravi
incidenti e perfino la morte:
ATENÇÃO A não observância ou o incumprimento dos pontos a seguir
mencionados, poderá causar uma descarga elétrica, incêndios,
acidentes graves ou morte:
- Prima di eseguire interventi di installazione, di manutenzione o di modifica scollegare la
tensione di rete ed adottare tutti i provvedimenti necessari per impedirne il ricollegamento
non intenzionale.
- Non tentare di aprire, di modificare o di riparare da soli l'apparecchio.
- Impedire la penetrazione di corpi estranei nell'apparecchio, ad esempio fermagli o altri
oggetti metallici.
- Non far funzionare l'apparecchio in un ambiente umido. Non far funzionare l'apparecchio
in un ambiente soggetto alla formazione di condensa o di rugiada.
- Non toccare quando acceso e subito dopo lo spegnimento. La superficie calda può
causare scottature.
- Antes de trabalhos de instalação, manutenção ou modificação, desligue a tensão de
alimentação, protegendo-a contra uma nova ligação involuntária.
- Não efectue nenhuma modificação ou tentativa de reparação no aparelho. Quando
necessário contacte o seu distribuidor. Não abra o aparelho.
- Proteger a fonte de alimentação contra a introdução inadvertida de corpos metálicos, como
por ex., clipes ou outras peças de metal.
- Não usar o aparelho em ambientes húmidos. Não usar o aparelho em ambientes propensos
a condensações.
- Não tocar enquanto estiver em funcionamento, nem após a desligar. A superficie poderá
estar quente e provocar lesões.
EN POE.8AT-DC1 Installation Manual
Product Description
The POE.8AT-DC1 is a DIN-rail mountable injector, which provides power for Power over Ethernet
(PoE and PoE+) applications. It injects power to 8 individual PoE channels (IEEE 802.3at) via RJ45
Ethernet ports to supply powered devices (PD) of type 1 and type 2.
Intended Use
This device is designed for installation in an enclosure and is intended for commercial use, such as in
industrial control, process control, monitoring and measurement equipment or the like.
The device is suitable for indoor applications. Outdoor applications are also allowed as long as all
requirements specified in this manual (enclosure, controlled environment, condensation, ...) are met.
Do not use this device in equipment, where malfunctioning may cause severe personal injury or
threaten human life without additional appropriate safety devices, that are suited for the end-
application. If this device is used in a manner outside of its specification, the protection provided by the
device may be impaired.
Installation Instructions
Install device in an enclosure providing protection against electrical, mechanical and fire hazards.
Install the device onto a DIN-rail according to EN 60715 with the RJ45 input connectors on the bottom
of the device.
Make sure that the wiring is correct by following all local and national codes. Use appropriate copper
cables that are suitable for the operating temperature of the device. Ensure that all strands of a
stranded wire enter the terminal connection. Unused screw terminals should be securely tightened.
Use shielded twisted pair Ethernet cables specified for usage in IEEE 802.3at.
The device is designed for pollution degree 2 areas in controlled environments. No condensation or
frost is allowed.
The enclosure of the device provides a degree of protection of IP20. The enclosure does not provide
protection against spilled liquids.
The device is designed as “Class of Protection III” equipment according to IEC 61140.
The device can be supplied from batteries or similar DC sources. The voltage between the supply
terminals and ground must not exceed 60Vdc continuously. In order to fulfill the IEEE 802.3at
requirements, the external power source and wiring connected to the supply voltage terminals need to
have a minimum isolation strength of 1500Vac to ground. Check for correct input polarity. The device
will not operate when the voltage is reversed. The device must be supplied from a PELV or SELV
source or an "Isolated Secondary Circuit" in order to maintain a SELV or PELV output. A minimum
input voltage of 52Vdc is required to fulfill the IEEE 802.3at requirements with 30W (PD type 2) per
channel. If the voltage is lower than 52V, only devices with a power requirement of 15W (PD type 1)
can be supplied.
A disconnecting means shall be provided for the input of the device.
There is no input inrush current limitation included. The internal input capacitor of typically 100µF will
be charged without any specific limitation means when connected to the supplying system.
Use an external circuit breaker with 6A B- or 4A C-Characteristic for the supply voltage input if the
current of the supplying source is higher than 7A.
The device is designed for convection cooling and does not require an external fan. Do not obstruct
airflow and do not cover ventilation grid!
The device is designed for altitudes up to 2000m (6560ft).
Keep the following minimum installation clearances: 40mm on top, 20mm on the bottom, 5mm left and
right side. Increase the 5mm to 15mm in case the adjacent device is a heat source. When the device
is permanently loaded with less than 50%, the 5mm can be reduced to zero.
The maximum surrounding air temperature is +70°C (+158°F). The operational temperature is the
same as the ambient or surrounding air temperature and is defined 2cm below the device.
The device is designed to operate in areas between 5% and 95% relative humidity.
Do not plug or unplug the device as long as input voltage is present.
Do not unplug the supply voltage connectors more often than 20 times in total.
Functional Description
The output is electronically protected against no-load, overload and short circuit and can supply any
kind of loads according to IEEE 802.3at.
Do not apply return voltages from the load to the output terminals higher than 56V.
The device is equipped with an over-current protection for each PoE output channel. If the current
exceeds the output current limitation value, the affected PoE channel will be switched off. Unplug the
affected channel for at least 2s. If the over-current is cleared, the device will operate normally again.
The device detects connected PoE loads automatically and will not power connected non-PoE devices
according to IEEE 802.3at.
Technical Data
All values are typical figures specified at 53Vdc supply voltage, 8x 30W
output load, 25°C ambient temperature and after a 5 minutes run-in time
unless otherwise noted.
Supply voltage DC 53V Nominal
Supply voltage range 48 – 56Vdc For PoE+ applications,
the input voltage must
be above 52Vdc
PoE Power outputs 8x 30W PoE+ Applications
8x 15.4W PoE Applications
Output current limitation 0.63A PoE+ Applications
(per channel) 0.33A PoE Applications
Efficiency 97.3% DC 53V, 8x30W output
Power losses 6.4W DC 53V, 8x30W output
Temperature range -25 to +60°C PoE+ Applications
-25 to +70°C PoE Applications
Max. wire size (litz wire) 1.5mm²
Max. wire size with ferrules 1.5mm²
Wire size AWG AWG 26-14
Maximum wire diameter 1.8mm
Wire stripping length 6mm / 0.25inch
Tightening torque 0.8Nm / 7lb.inch
Size (wxhxd) 39x128x117mm Without DIN-rail
Weight 380g / 0.84lb
Functional Diagram
Reverse Input
Polarity
Protection
+
-
Ch1
Ch2
Ch3
Ch8
PoE
Power Injector
PoE
Output
Channels
Ch1
Ch2
Ch3
Ch8
PoE
Input
Channels
.
.
.
.
.
.
.
.
.
.
.
.
Power
Conditionng
.
.
.
Supply
Voltage
Temperature Range
Allowed output power
Ambient temperature
0A-25
8x 30W
0+60 +70°C
8x 15.4W
A: PoE+ Applications
B: PoE Applications
A
B
  • Page 1 1
  • Page 2 2

Puls POE.8AT-DC1 POE Power Supply Manual de usuario

Categoría
Juguetes
Tipo
Manual de usuario