Tenda CP7 Guía de instalación

Categoría
Cámaras de seguridad
Tipo
Guía de instalación
Quick Installation Guide
Security Pan/Tilt Camera
CP3/CP4/CP5/CP6/CP7/CP8/CP9
This guide is applicable to the Ethernet port version and non-Ethernet port version of Security Pan/Tilt Camera. The Ethernet
port version is used for illustration unless otherwise specified.
For product or function details, please go to www.tendacn.com to download the user guide.
Package contents
Camera x 1
Power adapter x 1
Base x 1
Installation template x 1
Screw x 2
(BA3 x 25 mm, Head diameter:6.0 mm)
Quick installation guide
Anchor x 2
(Height: 6.6 mm, Inner diameter:2.4 mm, Length:26.4 mm)
Appearance
LED indicator
Solid red: Initializing and starting.
Blinking red slowly: Disconnected from a 2.4 GHz Wi-Fi network.
Blinking red quickly: Connecting to a 2.4 GHz Wi-Fi network.
Solid blue: Connected to a 2.4 GHz Wi-Fi network.
Blinking blue slowly: Upgrading.
Blinking blue quickly: Waiting to connect to a 2.4 GHz Wi-Fi network.
Ethernet port
10/100Mbps auto-negotiation Ethernet port, used for connecting the router, switch, etc.
Reset button
Hold down the Reset button for about 5 seconds and release it when the LED indicator blinks
blue quickly or hear a prompt tone. The camera is reset to factory settings successfully.
Micro SD card slot
Turn the lens upward, then you can see it.
Speaker
Power port
Ethernet port
Micro SD card slot
Reset button
Add the camera to TDSEE App
Before adding your camera, please ensure that the router is connected to the internet successfully and the filter function
is disabled.
1. Power on the camera.
The LED indicator lights solid red after the camera is powered on. When the LED indicator blinks blue quickly, the camera
is waiting to connect to a 2.4 GHz Wi-Fi network.
2. Download the TDSEE App onto your mobile device by searching for TDSEE in the App Store or Google Play or by scanning
the QR code.
3. Run TDSEE App and follow the instructions to complete user registration. Enter the home page,tap the Add a device or
the upper right corner of the home page .
Internet
Router
QR code
Or
4. Scan the QR code on the bottom of the camera, and follow the instructions in the App.
Install the device
The camera supports desktop, ceiling and wall installations. This guide takes ceiling installation as an example.
(1) Please make sure the ceiling is strong enough to withstand three times the weight of the camera and base.
(2) You may need a hammer drill, a drill bit, a screwdriver, and a ladder for the installation.
After finishing the ceiling installation, in order to facilitate monitoring, you need to adjust the camera installation status.
Methods: Run the TDSEE App. Choose the camera on the home page, and tap Settings
in the upper right corner
>Video
Flip-over, choose Camera UP-side Down.
Anchor
Base
Screw
Ceiling
Installation template
Drill bit diameter: 6 mm
Hole depth: 28-32 mm
Buckle
Slot
FAQ
Q1. What should I do if I failed to add the camera?
A1. Try the following solutions:
-Ensure that the router is connected to the internet successfully.
-The Security Pan/Tilt Camera only supports 2.4 GHz Wi-Fi network. When adding the Security Pan/Tilt Camera, you
need to connect the smartphone to a 2.4 GHz Wi-Fi network.
-Do not hide the Wi-Fi network of the router when adding the Security Pan/Tilt Camera (After adding the Wi-Fi
network successfully, you can hide the Wi-Fi network).
-Confirm whether the LED indicator of the camera blinks blue quickly. If not, please reset the camera and configure it
again.
Reset method: Hold the Reset button down for about 5 seconds and release it when the LED indicator blinks blue
quickly or you hear a prompt tone. The Security Pan/Tilt Camera is reset successfully.
Q2. What should I do when the video preview is not smooth?
A2. Try the following solutions:
-Check if the Wi-Fi network of the router is smooth.
-Take the router closer to the camera.
-When previewing the video with cellular mobile data, make sure that the internet connection of the smartphone is
smooth.
-Auto,Fluent, and HD are supported for video preview. By default, it is Auto. You can adjust the video clarity
according to the internet status.
Q3. How to store the video?
A3. Try the following methods:
Method 1: Install the Micro SD card to the camera. By default, the camera's recording mode is Alarm Recording, this can
be changed and set to All-day Recording through TDSEE App.
Method: Run TDSEE App, choose the Security Pan/Tilt Camera on the home page, then tap Settingsin
the upper right cornerRecording Settings, choose All-day Recording.
Method 2: Subscribe to the Cloud Storage Service on TDSEE App.
Method: Run TDSEE App, choose the Security Pan/Tilt Camera on the home page, and then tap Cloud in the
lower left corner. You can enjoy free cloud storage service (7-days loop detection recording) for 3 months
upon the first activation.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be
required to take adequate measures.
This equipment should be installed and operated with minimum distance 20cm between the device and your body.
The mains plug is used as disconnect device, the disconnect device shall remain readily operable.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio equipment type CP3/CP4/CP5/CP6/CP7/CP8/CP9 is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
http://www.tendacn.com/en/service/download-cata-101.html
Operating Frequency:
2.4 GHz: EU/2412-2472MHz (CH1-CH13)
EIRP Power (Max.):
2.4 GHz: 19dBm
Software Version: V1.0.X
Caution:
Adapter Model: BN073-A09009E, BN073-A09009B
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO., LTD.
Input: 100-240V AC, 50/60Hz 0.3A
Output: 9V DC, 1A
: DC Voltage
Español
DECLARACIÓN UE DE CONFORMIDAD SIMPLIFICADA
Por la presente, SHENZHEN TENDA TECHNOLOGY CO., LTD., declara que e1 tipo de equipo radioelectrico
CP3/CP4/CP5/CP6/CP7/CP8/CP9 es conforme con 1a Directiva 2014/53/UE.
El texto completo de la declaratión UE de conformidad está disponible en la direcctión Internet siguiente:
http://www.tendacn.com/en/service/download-cata-101.html
Čeština
ZJEDNODUŏENÉ EU PROHLÁŏENÍ O SHODč
Tímto SHENZHEN TENDA TECHNOLOGY CO., LTD., prohlaŐuje, Ŭe typ rádiového zaňízení CP3/CP4/CP5/CP6/CP7/CP8/CP9 je v
souladu se smĎrnicí 2014/53/EU. Úplné znĎní EU prohláŐení o shodĎ je k dispozici na této internetové adrese:
http://www.tendacn.com/en/service/download-cata-101.html
Deutsch
VEREINFACHTE EU-KONFORMITÄTSERKLÄRUNG
Hiermit erklärt SHENZHEN TENDA TECHNOLOGY CO., LTD., dass der Funkanlagentyp CP3/CP4/CP5/CP6/CP7/CP8/CP9 der
Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
http://www.tendacn.com/en/service/download-cata-101.html
Français
DECLARATION UE DE CONFORMITE SIMPLIFIEE
Le soussigné, SHENZHEN TENDA TECHNOLOGY CO., LTD., déclare que l'équipement radioélectrique du type
CP3/CP4/CP5/CP6/CP7/CP8/CP9 est conforme à la directive 2014/53/UE.
Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante:
http://www.tendacn.com/en/service/download-cata-101.html
Italiano
DICHIARAZIONE DI CONFORMITÀ UE SEMPLIFICATA
Il fabbricante, SHENZHEN TENDA TECHNOLOGY CO., LTD., dichiara che il tipo di apparecchiatura radio
CP3/CP4/CP5/CP6/CP7/CP8/CP9 è conforme alla direttiva 2014/53/UE.
Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:
http://www.tendacn.com/en/service/download-cata-101.html
Polski
UPROSZCZONA DEKLARACJA ZGODNOŚCI UE
SHENZHEN TENDA TECHNOLOGY CO., LTD. niniejszym oświadcza, że typ urządzenia radiowego
CP3/CP4/CP5/CP6/CP7/CP8/CP9 jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym:
http://www.tendacn.com/en/service/download-cata-101.html
Română
DECLARAȚIA UE DE CONFORMITATE SIMPLIFICATĂ
Prin prezenta, SHENZHEN TENDA TECHNOLOGY CO., LTD. declară că tipul de echipamente radio
CP3/CP4/CP5/CP6/CP7/CP8/CP9 este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației UE de
conformitate este disponibil la următoarea adresă internet:
http://www.tendacn.com/en/service/download-cata-101.html
Русский
Декларация соответствия
SHENZHEN TENDA TECHNOLOGY CO. LTD. заявляет, что радиооборудование типа CP3/CP4/CP5/CP6/CP7/CP8/CP9
соответствует Директиве 2014/53 / ЕС. Полный текст декларации соответствия ЕС доступен по следующему
интернет-адресу: http://www.tendacn.com/en/service/download-cata-101.html
Türkçe
Uygunluk Beyanı
Burada, SHENZHEN TENDA TECHNOLOGY CO., LTD., CP3/CP4/CP5/CP6/CP7/CP8/CP9 radio ekipman tipinin 2014/53/EU
direktiflerine uygun olduğunu beyan eder.
Avrupa uygunluk beyannamesinin tam metni takip eden internet adresinde mevcuttur.
http://www.tendacn.com/en/service/download-cata-101.html
يبرعرع
 
   SHENZHEN TENDA TECHNOLOGY CO., LTD.    
EU/53/2014    CP9/ CP8/CP7/CP6/CP5/CP4/CP3
           
http://www.tendacn.com/en/service/download-cata-101.html
RCM
EAC
NOM
LA OPERACIóN DE ESTE DISPOSITIVO ESTA SUJETA A LAS SIGUIENTES CONDICIONES:
a) Es posible que este equipo o dispositivo no cause interferencia perjudicial.
b) Este equipo o dispositivo debe aceptar cualquier tipo de interferencia, incluyendo la que pueda causar su operación no
deseada.
Estimado usuario: Antes de utilizar este producto lo invitamos a leer el siguiente manual para que conozca todas sus funciones
y caracteristicas.
Producto
NOMBRE DEL PRODUCTO:
Cámara de seguridad con panorámica e inclinación
MODELO: CP3/CP4/CP5/CP6/CP7/CP8/CP9
Alimentador de Energía:
Alimentación: 100V - 240V ca 50Hz/60Hz, 0.3A
Salida: 9V cc 1A
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with
Part 15 of the FCC RF Rules.
This equipment should be installed and operated with minimum distance 20cm between the device and your body.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operating frequency: 2412-2462MHz
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this
product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or
electronic equipment.
Operating Temperature: -10°C - 40°C
Operating Humidity: (10% - 95%) RH, non-condensing
Technical Support
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, NO.1001, Zhongshanyuan Road, Nanshan District, Shenzhen, China. 518052
USA hotline: 1-800-570-5892
Toll Free: 7 x 24 hours
Canada hotline: 1-888-998-8966
Toll Free: Mon - Fri 9 am - 6 pm PST
Hong Kong hotline: 00852-81931998
Global hotline: +86 755-2765 7180 (China Time Zone)
Website: www.tendacn.com
E-mail: support@tenda.com.cn
Copyright
©2021 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and product names
mentioned herein are trademarks or registered trademarks of their respective holders. Specifications are subject to change
without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Tenda CP7 Guía de instalación

Categoría
Cámaras de seguridad
Tipo
Guía de instalación