Transcripción de documentos

Pedal Unit DDKU-P7 Owner's Manual 4-3 Hold the cable connector so that the two lines on the connector are facing upward, then carefully plug it into the inside connector on the bottom of the second expression pedal. 2-3 Hold the cable connector so that the two lines on the connector are Installing the Pedalboard • Convenient carrying handle You can transport this pedal unit holding the carrying handle on the rear. facing upward, then carefully plug it into the inside connector on the bottom of the expression pedal. Precautions Before installing/uninstalling, turn the power of the Instrument off. Take care not to drop the pedalboard or to pinch your finger(s). Do not remove the expression pedal and the 2nd expression pedal once they have been installed, since this may cause a faulty contact and result in a malfunction. 4-4 Install the 2nd expression pedal to the corresponding indentation on the pedal unit by first fitting the protrusion on the back side and then fitting the front side as shown. As you fit it in position, the front side of the 2nd expression pedal is slightly lifted. When installing the 2nd expression pedal, be careful to avoid catching the connector. Have a Phillips-head (+) screwdriver ready. 2-4 Install the expression pedal to the corresponding indentation on the 1 pedal unit by first fitting the protrusion on the back side and then fitting the front side as shown. Please confirm that all parts shown in the illustration are provided. Install the 2nd expression pedal • For users of the optional DDKU-L7 You can attach this pedal unit to the optional DDKU-L7 keyboard stand. Fit the indented parts on the rear of the pedal unit onto the corresponding protrusions of the DDKU-L7 keyboard stand. As you fit it in position, the front side of the expression pedal is slightly lifted. When installing the expression pedal, be careful to avoid catching the connector. Install the expression pedal Do not hold the keys, since this may damage or result in a malfunction. Pedal Unit 5 Fix the 2nd expression pedal to the pedal unit while holding the 2nd expression pedal, using the screw you removed in step 4-2. To uninstall the pedalboard, reverse the procedure. 2nd Expression Pedal 2 Expression Pedal Cord 3 Fix the expression pedal to the pedal unit while holding the expression pedal, using the screw you removed in step 2-2. Post-assembly checklist Once you’ve assembled the stand, check the following points: • Does the pedalboard produce sounds? • Confirm that the Pedalboard cord plugs are securely connected to each terminal on the Main unit and pedalboard. Install the expression pedal. Specifications 6 2-1 Remove the tape from the connector in the hole of the pedal unit. 2-2 Remove the screw. Be careful not to drop any screws inside the pedal umit during installation. Do not discard the screw; you will need it later in step 3. 4 Install the 2nd expression pedal. Connect the TO MAIN terminal of the Pedalboard to the TO PEDAL terminal of the instrument using the cord. Pedalboard 20 Keys (C - G), Initial Touch Controls Footswiches (Left, Right), Expression pedal Dimensions (WxDxH), Weight 873 x 539 x 310mm (with the expression pedal installed), 13kg Connector TO MAIN 4-1 Remove the tape from the connector in the hole of the pedal unit. 4-2 Remove the screw. Be careful not to drop any screws inside the pedal unit during installation. Do not discard the screw; you will need it later in step 5. JA EN U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2006 Yamaha Corporation WH76610 ???MWDH?.?-01A0 Printed in Japan