Transcripción de documentos

English Español Thank you for purchasing the Sony AC Adaptor. Muchas gracias por la adquisición de este adaptador de ca Sony. Before operating the product, please read this manual thoroughly and retain it for future reference. Antes de utilizar el producto, lea detenidamente este manual, y consérvelo para futuras referencias. 2-586-022-11(1) A DC IN jack cover Tapón de la tome DC IN AC Adaptor to wall outlet A un tomacorriente Operating Instructions Manual de instrucciones Mode d’emploi 使用说明书 AC-LS5 can be used as follows AC Adaptor AC-LS5 Adaptador de ca AC-LS5 AC Power cord Cable de alimentación de ca Warranty for Recorded Content Connecting cord (DK-2AA) Cable conector (DK-2AA) Recording contents cannot be compensated if shooting or playback is not made due to a malfunction of this product. Model No. AC-LS5 Serial No. to wall outlet A un tomacorriente AC Power cord Cable de alimentación de ca © 2005 Sony Corporation Printed in Japan WARNING To prevent fire or shock hazard, do not expose the product to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. NOTICE FOR THE CUSTOMERS IN THE U.S.A. AND CANADA AC Adaptor AC-LS5 Adaptador de ca AC-LS5 Connecting to the Wall Outlet for Use The procedure for connecting this adaptor differs depending on the type of your digital still camera. Connecting the AC Adaptor directly See illustration A. 1 Open the DC IN jack cover on the digital still camera, and connect the AC Adaptor to the DC IN jack on the digital still camera. 2 Connect the AC Power cord to the AC Adaptor. 3 Connect the AC Power cord to the wall outlet. Using the Connecting Cord This symbol is intended to alert the user to the presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The Graphical Symbols with Supplemental Making is located on the bottom of the product. NOTICE FOR THE CUSTOMERS IN THE U.S.A. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. See illustration B. 1 Open the battery cover of your digital still camera and insert the connecting cord (DK-2AA) after confirming it’s direction. Then close the battery cover. 2 Connect the AC Adaptor to the connecting cord (DK-2AA). 3 Connect the AC Power cord to the AC Adaptor. 4 Connect the AC Power cord to the wall outlet. Conexión a un tomacorriente de la red para utilización El procedimiento para conectar este adaptador diferirá dependiendo del tipo de su cámara digital. Conexión directa del adaptador de ca Consulte la ilustración A. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Nombre del producto: Adaptador de ca Modelo: AC-LS5 AC-LS5 is a 4.2 V output AC Adaptor. You can use a home power supply (wall outlet) by this adaptor to operate the digital still camera or charge a battery pack in a digital still camera with a built-in charging function. This product does not have dust-proof, splash-proof or water-proof specifications. Owner’s Record AC-LS5K ADVERTENCIA Para evitar incendios o descargas eléctricas, no exponga el producto a la lluvia ni a la humedad. Para evitar incendios o descargas eléctricas, no abra la unidad. En caso de avería, solicite los servicios de personal cualificado solamente. Notes on Use B The model and serial numbers are located on the AC Adaptor. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. WARNING To prevent fire or shock hazard, do not expose the product to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. 1 Abra el tapón de la toma DC IN de la cámara digital, y conecte el adaptador de ca en la toma DC IN de dicha cámara. 2 Conecte el cable de alimentación de ca al adaptador de ca 3 Conecte el cable de alimentación de ca a un tomacorriente de la red. Others • The negligible amount of electric current will flow into the AC Adaptor as long as the AC Adaptor is plugged into the wall outlet. • Unplug the product from the wall outlet if it will not be used for a long time. To disconnect the cord, pull it out by the plug. Never pull the cord itself. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • Do not operate the product with a damaged cord or if it has been dropped or damaged. • Do not apply mechanical shock to or drop the product. • Use this product near a wall outlet. This is to ensure that the power plug can be immediately unplugged from the wall outlet to power off if some abnormality occurs during use. • The nameplate indicating operating voltage, power consumption, etc. is located on the AC Adaptor. • Be sure that nothing metallic comes into contact with the metal parts of the product or connecting cord. If it does, a short may occur and the product may be damaged. • Always keep the metal contacts clean. • Do not disassemble or convert the product. • While the product is in use, it gets warm. But this is normal. • Keep the product away from AM radio tunes, because it will disturb AM reception. • Do not place the product in a location where it is: – Extremely hot or cold – Dusty or dirty – Very humid – Vibrating • Placing this product in locations subject to the direct sunlight such as on dashboards or near heat-producing devices may cause this product to deform or malfunction. If any difficulty should arise, unplug the product and contact your nearest Sony dealer. Specifications AC Adaptor AC-LS5 Input rating Output rating Operating temperature Storage temperature Dimensions 100 - 240 V AC 50/60 Hz 4.2 V DC 0 °C to +40 °C (+32 °F to +104 °F) –20 °C to +60 °C (–4 °F to +140 °F) Approx. 48 × 29 × 81 mm (w/h/d) (1 15/16 × 1 3/16 × 3 1/4 in.) Mass Approx. 130 g (5 oz.) * See the label on the AC Adaptor for other specifications. Included items AC Adaptor (AC-LS5) (1) AC Power cord (1) Connecting cord (DK-2AA) (1) Set of printed documentation Consulte la ilustración B. 1 Abra la tapa de la batería de su cámara digital e inserte el cable conector (DK-2AA) después de haber confirmado su sentido. Después cierre la tapa de la batería. 2 Conecte el adaptador de ca al cable conector (DK-2AA). 3 Conecte el cable de alimentación de ca al adaptador de ca 4 Conecte el cable de alimentación de ca a un tomacorriente de la red. El AC-LS5 es un adaptador de ca con una salida de 4,2 V. Usted podrá utilizar la fuente de alimentación de su hogar (tomacorriente de la red) para alimentar con este adaptador una cámara digital o cargar la batería de una cámara digital con función de carga incorporada. Notas sobre la utilización Este producto no posee especificaciones de resistencia al polvo, a las salpicaduras, ni al agua. Garantía del contenido grabado El contenido de la grabación no podrá compensarse si la grabación o la reproducción no se realizan debido al mal funcionamiento de este producto. Otros • Mientras el adaptador de alimentación de ca esté enchufado en un tomacorriente de la red, a través del mismo fluirá una pequeña corriente eléctrica. • Cuando no vaya a utilizar el producto durante mucho tiempo, desconéctelo del tomacorriente de la red. Para desconectar el cable de alimentación, tire del enchufe. No tire nunca del propio cable. • No utilice el adaptador de ca en un espacio estrecho, como entre una pared y un mueble. • No utilice el producto con un cable de alimentación dañado, después de haberse caído, ni cuando esté dañado. • No golpee ni deje caer el producto. • Utilice este producto cerca de un tomacorriente de la red. Esto es para asegurarse de poder desenchufarlo inmediatamente de dicho tomacorriente en caso de que se produzca alguna anormalidad. • La placa de características, en la que se indica la tensión de alimentación, el consumo, etc., se encuentra en el adaptador de ca • Tenga cuidado de que ningún objeto metálico entre en contacto con las partes metálicas del producto ni con el cable conector. En caso contrario, podría producirse un cortocircuito, que dañaría el producto. • Mantenga siempre limpios los contactos metálicos. • No desarme ni modifique el producto. • Cuando utilice el producto, se calentará. Sin embargo, esto es normal. • Mantenga el producto alejado de receptores de AM, porque podría interferir en la recepción de AM. • No coloque el producto en un lugar: – Extremadamente cálido o frío – Polvoriento o sucio – Muy húmedo – Sometido a vibraciones • Si coloca el producto en lugares sometidos a la luz solar directa, como sobre el panel de instrumentos, o cerca de aparatos de calefacción, es posible que se deforme o funcione mal. En caso de cualquier dificultad, desenchufe la unidad y póngase en contacto con su proveedor Sony. Especificaciones Design and specifications are subject to change without notice. Utilización del cable conector El AC-LS5 podrá utilizarse de la forma siguiente To use this product abroad You can use this product in any country or region. Use a commercially available AC plug adaptor (not supplied), if necessary, depending on the design of the wall outlet. Wall outlet AC-LS5 AC plug adaptor (not supplied) Adaptador de ca AC-LS5 Entrada ca 100 a 240 V 50/60 Hz 11 W Salida cc 4,2 V 1,5 A ó 1,7 A (refiérase a la etiqueta del adaptador suministrado) Temperatura de funcionamiento 0 a +40 °C Temperatura de almacenamiento –20 a +60 °C Dimensiones Aprox. 48 × 29 × 81 mm (an/al/prf) Masa Aprox. 130 g * Con respecto a otras especificaciones, consulte la etiqueta del adaptador de ca Elementos incluidos Adaptador de ca (AC-LS5) (1) Cable de alimentación de ca (1) Cable conector (DK-2AA) (1) Juego de documentación impresa El diseño y las especificaciones están sujetos a cambio sin previo aviso. Do not connect the AC Adaptor to a voltage adaptor (travel converter) for overseas travel. This may result in overheating or other malfunction. Para utilizar este producto en el extranjero Usted podrá utilizar este producto en cualquier país o región. No conecte el adaptador de ca a un adaptador de tensión (convertidor para viajes) cuando vaya al extranjero. Esto podría resultar en recalentamiento o mal funcionamiento.