1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
Install the fixture arms by screwing them to the swivels, then secure them to the hub using the washers and couplers.
Place the shade onto the shade base and secure it in place with the collar nut using the shade tool. Repeat for remaining
shades.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the hub cover and washer onto the hub nipple and secure them in place with the hex nut. Place the spacer onto the
hub nipple.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
3
4
5
Kona 4, 6, and 9 Light Chandelier
1.0
F3125-4-F3126-6-F3128-9
Chandelier
F3125/4, F3126/6, F3128/9
LAMP
STEM
1
HUB
5
COLLAR NUT
SHADE
SHADE TOOL
SOCKET
SHADE
BASE
FIXTURE
ARM
HUB COVER
HUB NIPPLE
HEX NUT
WASHER
SPACER
COUPLER
& WASHER
SWIVEL
2
3