Yamaha YDP-162/142 El manual del propietario

Categoría
Pianos digitales
Tipo
El manual del propietario

Este manual también es adecuado para

Mode d’emploi
Manual de instrucciones
ENGLISHFRANÇAIS
Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual.
Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel.
EN
ES
FR
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
YDP-162
YDP-142
Owner’s Manual
ESPAÑOL
YDP-162/142 Owner’s Manual
2
ENGLISH
Table of Contents
PRECAUTIONS ........................................ 5
About the Manuals................................. 7
Included Accessories .............................. 7
Panel Controls and Terminals ................ 8
Basic Operations
Setting Up .............................................. 9
Key Cover ......................................................................9
Music Rest .....................................................................9
Turning the Power On .................................................10
Auto Power Off ............................................................11
Using Headphones.......................................................11
Playing the Piano ................................. 12
Setting the Volume ......................................................12
Intelligent Acoustic Control (I.A.C.)..............................12
Using the Pedals ..........................................................13
Using the Damper Resonance ......................................13
Using the Metronome..................................................14
Changing the Touch Sensitivity....................................15
Maintenance ........................................ 15
Advanced Operations
Playing Various Musical Instrument
Sounds (Voices).................................... 16
Selecting a Voice..........................................................16
Listening to the Demo Songs .......................................17
Adding Variations to the Sound (Reverb)......................18
Transposing the Pitch in Semitones ..............................19
Fine-tuning the Pitch ...................................................19
Layering Two Voices (Dual mode) ................................20
Playing Duo .................................................................21
Song Playback and Practice..................22
Listening to 50 Preset Songs ........................................22
Practicing a One-Hand Part..........................................23
Playing from the top of the bar including
a rest or blank..............................................................23
Recording Your Performance ...............24
Recording Your Performance........................................24
Changing the Initial Settings of the Recorded Song .....25
Deleting Recorded Data...............................................25
Backing up Data and Initializing the
Settings .................................................26
Data Maintained When Power is Turned Off ................26
Saving the User Song data to a computer ....................26
Transferring SMF Files Between a Computer and this
Instrument...................................................................26
Initializing the Settings.................................................26
Appendix
Troubleshooting ...................................27
Keyboard Stand Assembly....................28
Specifications ........................................32
Index .....................................................33
ENGLISH
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply or
adapter other than one described in the manual, on the name
plate, or specifically recommended by Yamaha.
WARNING:
Do not place this product in a position where
anyone could walk on, trip over, or roll anything over power or
connecting cords of any kind. The use of an extension cord is
not recommended! If you must use an extension cord, the
minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The
smaller the AWG number, the larger the current handling
capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied
or; a cart, rack, or stand that is recommended by Yamaha. If a
cart, etc., is used, please observe all safety markings and
instructions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves the
right to change or modify any of the specifications without notice
or obligation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT
operate for long periods of time at a high volume level or at a
level that is uncomfortable. If you experience any hearing loss or
ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches
are stable and any optional fixtures (where applicable) are well
secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to
how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and
are therefore the owners responsibility. Please study this manual
carefully and consult your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and
environmentally friendly. We sincerely believe that our products
and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery
which (if applicable) is soldered in place. The average life span
of this type of battery is approximately five years. When
replacement becomes necessary, contact a qualified service
representative to perform the replacement.
This product may also use “household” type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended
for the battery being charged.
When installing batteries, never mix old batteries with new ones,
and never mix different types of batteries. Batteries MUST be
installed correctly. Mismatches or incorrect installation may result
in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep
all batteries away from children. Dispose of used batteries
promptly and as regulated by the laws in your area. Note: Check
with any retailer of household type batteries in your area for
battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for
some reason its useful life is considered to be at an end, please
observe all local, state, and federal regulations that relate to the
disposal of products that contain lead, batteries, plastics, etc. If
your dealer is unable to assist you, please contact Yamaha
directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your purchase.
Model
Serial No.
Purchase Date
92-BP (bottom)
PLEASE KEEP THIS MANUAL
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena
Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : Digital Piano
Model Name : YDP-162, YDP-142
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received
including interference that may cause undesired opera-
tion.
See user manual instructions if interference to radio recep-
tion is suspected.
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så
länge som den ar ansluten till vägguttaget, även om själva
apparaten har stängts av.
ADVARSEL: Netspændingen til dette apparat er IKKE
afbrudt, sålænge netledningen sidder i en stikkontakt, som
er tændt — også selvom der er slukket på apparatets
afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei
irroita koko laitetta verkosta.
(standby)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifi-
cations not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2.
IMPORTANT: When connecting this product to acces-
sories and/or another product use only high qu ality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this
product in the USA.
3.
NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions
found in the users manual, may cause interference harmful
to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be deter-
mined by turning the unit “OFF” and “ON”, please try to elim-
inate the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the appro-
priate retailer, please contact Yamaha Corporation of
America, Electronic Service Division, 6600 Orangethorpe
Ave, Buena Park, CA90620
The above statements apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.
* This applies only to products distributed by
YAMAHA CORPORATION OF AMERICA.
(FCC DoC)
YDP-162/142 Owner’s Manual
ENGLISH
DMI-5 1/2
5
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators. Also, do
not excessively bend or otherwise damage the cord, or place heavy objects on it.
Only use the voltage specified as correct for the instrument. The required voltage is
printed on the name plate of the instrument.
Use the specified adaptor (page 32) only. Using the wrong adaptor can result in
damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument or
attempt to disassemble or modify the internal components in any way. If it should
appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions,
place on it any containers (such as vases, bottles or glasses) containing liquids
which might spill into any openings. If any liquid such as water seeps into the
instrument, turn off the power immediately and unplug the power cord from the AC
outlet. Then have the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item may fall over
and cause a fire.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected by
Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Read carefully the attached documentation explaining the assembly process. Failure
to assemble the instrument in the proper sequence might result in damage to the
instrument or even injury.
Do not place the instrument in an unstable position where it might accidentally fall
over.
When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in other
injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent damage to
the cables or injury to anyone who might trip over them.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When you
are not using the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
Use only the stand specified for the instrument. When attaching the stand or rack,
use the provided screws only. Failure to do so could cause damage to the internal
components or result in the instrument falling over.
Power supply/AC power adaptor
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/AC power adaptor
Assembly
Location
YDP-162/142 Owner’s Manual
6
ENGLISH
DMI-5 2/2
Before connecting the instrument to other electronic components, turn off the power
for all components. Before turning the power on or off for all components, set all
volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and gradually
raise the volume controls while playing the instrument to set the desired listening
level.
Do not insert a finger or hand in any gaps on the key cover or instrument. Also take
care that the key cover does not pinch your finger.
Never insert or drop paper, metallic, or other objects into the gaps on the key cover,
panel or keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a high
or uncomfortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
Do not place the bench in an unstable position where it might accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or
for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the possibility
of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Keep special watch over any small children so that they don’t fall off the rear of the
bench. Since the bench does not have a backrest, unsupervised use may result in
accident or injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with the application on
your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise
caused by communication.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or
unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other hard
objects can cause the finish to crack or peel. Use caution.
During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the
instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off
immediately with a soft cloth.
Saving data
Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a
computer (see online manual, Computer-related Operations; page 7).
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has
legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Connections
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
YDP-162/142 Owner’s Manual
7
ENGLISH
About the Manuals
This instrument has the following manuals.
Included Manuals
Owner’s Manual (this book)
Explains how to use the instrument.
Quick Operation Guide (separate sheet)
Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding.
Online Manuals (PDF)
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring song
data, as well as MIDI functions such as MIDI channel and Local Control settings.
MIDI Reference
Contains the MIDI Data Format and MIDI Implementation chart.
MIDI Basics (only in English, French and German)
Contains basic explanations about MIDI.
To obtain these manuals, access the Yamaha Downloads website, select your country, enter “YDP-142” or “YDP-162” in
the Model Name box, then click [SEARCH].
Included Accessories
*1 You will need the PRODUCT ID on the sheet in order to fill out the User Registration form.
*2 May not be included depending on your particular area. Please check with your Yamaha dealer.
Yamaha Downloads
http://download.yamaha.com/
Thank you for choosing the Yamaha ARIUS.
In order to make the most of the performance potential and features of the instrument,
please read the manuals thoroughly, and keep them in a handy place for later reference.
Owner’s Manual (this book)
Quick Operation Guide (separate sheet)
“50 Greats for the Piano” (music book)
Online Member Product Registration*
1
AC power adaptor *
2
Power cord (YDP-162 only)
Bench *
2
YDP-162/142 Owner’s Manual
8
ENGLISH
Panel Controls and Terminals
The illustrations are taken from the YDP-142.
PHONESPHONESPHONESPHONES
TO PEDAL
12V
TO PEDAL
16V
Rear
(Keyboard side)
Rear
(Keyboard side)
Rear
(Keyboard side)
YDP-142
YDP-162
[ ] (Standby/On) switch..................... page 10
For turning the power on or setting to standby.
[MASTER VOLUME] knob.................... page 12
For adjusting the volume of the entire sound.
[DEMO/SONG] button .................. pages 17, 22
For playing the Demo Songs and the Preset Songs.
[PIANO/VOICE] button ............pages 16, 18, 20
For selecting a single Voice, two Voices for layering or
a Reverb Type.
[METRONOME] button......................... page 14
For starting or stopping the metronome.
[+R], [–L] buttons ....................pages 16, 19, 23
In general, these are for selecting the next or
previous Voice.
During Song playback, these are for selecting the
next or previous Song, and (while holding down
[PLAY]) turning on/off the right-hand and left-hand
Parts individually.
During Metronome playback, these are for
increasing or decreasing the Tempo.
[REC] button......................................... page 24
For recording your keyboard performance.
[PLAY] button ........................................page 25
For playing back the recorded performance.
[FUNCTION] .........................................page 19
Simultaneously holding these two buttons and
pressing the specified key sets will set the MIDI or
Transpose parameters.
[PHONES] jacks .................................... page 11
For connecting a set of standard stereo headphones.
[USB TO HOST] terminal
For connecting to a computer. For details, refer to
“Computer-related Operations” (page 7).
NOTICE
Use an AB type USB cable of less than 3 meters. USB
3.0 cables cannot be used.
[TO PEDAL] jack ...................................page 30
For connecting the Pedal Cord.
DC IN jack..............................................page 10
For connecting the power adaptor.
Pedals ....................................................page 13
For controlling expression and sustain, just as on an
acoustic piano.
YDP-162/142 Owner’s Manual
Basic Operations
9
ENGLISH
Setting Up
Key Cover
To open the key cover:
Lift the cover slightly, then push and slide it to the
end.
To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to
avoid catching fingers (yours or others, especially children’s) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument.
Music Rest
To raise the music rest:
1 Pull the music rest up and toward yourself as
far as it will go.
2 Flip down the two metal supports at the left
and right on the rear of the music rest.
3 Lower the music rest so that it rests on the
metal supports.
To lower the music rest:
1 Pull the music rest toward yourself as far as it
will go.
2 Raise the two metal supports (at the rear of the
music rest).
3 Gently lower the music rest backward until it is
all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from
the music rest until it is all the way down.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
1
2
3
YDP-162/142 Owner’s Manual
10
Basic Operations
ENGLISH
Turning the Power On
1 Connect the plugs of the AC power adaptor in the order shown in the illustration.
WARNING
Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable damage to both the adaptor
and the instrument.
CAUTION
Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during
electrical storms.
NOTE
Follow this procedure in reverse order when disconnecting the power adaptor.
2 Press the [ ] (Standby/On) switch to turn the power on.
Power indicator
If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power
is still on.
When you’re ready to turn the power to standby, press the [ ] (Standby/On) switch again for a second. The power
indicator turns off.
CAUTION
Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum
level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC
outlet.
16
1
2
3
Power cord
AC outlet
AC power
adaptor
DC IN jack
(page 8)
1
2
AC outlet
AC power
adaptor
DC IN jack
(page 8)
The shape of the plug and outlet differ
depending on locale.
[YDP-162] [YDP-142]
Power indicator
(Standby/On) switch
YDP-162/142 Owner’s Manual
Basic Operations
11
ENGLISH
Auto Power Off
NOTE
Default setting:
Enable
To prevent unnecessary power consumption, this instrument features an Auto Power Off
function that automatically turns the power off if the instrument is not operated for
approximately 30 minutes. If you do not want to use the Auto Power Off function, disable
the function as described below. The setting (disabled or enabled) is retained even if the
power is turned off.
Disabling Auto Power Off
Turn the power of the instrument off. Then, while holding down
the lowest key, press the [ ] (Standby/On) switch to turn on the
power again so that the [REC] indicator flashes three times,
indicating that the Auto Power Off function has been disabled.
You can also disable the Auto Power Off function without turning
the power off, by simultaneously holding down [DEMO/SONG]
and [PIANO/VOICE] and pressing the A
5 key.
Re-enabling Auto Power Off
To enable the Auto Power Off function again, simultaneously hold
down [DEMO/SONG] and [PIANO/VOICE] and press the A5 key.
Using Headphones
Since this instrument is equipped with two [PHONES] jacks, you can
connect two sets of standard stereo headphones. If you are using only
one set of headphones, insert a plug into either jack, which
automatically shuts off the speakers.
CAUTION
Do not use headphones at a high volume for an extended period of
time; doing so may cause hearing loss.
Using the headphone hanger (for YDP-162 only)
You can hang the headphones on this instrument. Refer to “Keyboard
Stand Assembly” on page 28 for instructions on installing the
headphone hanger.
NOTICE
Do not hang anything other than the headphones on the hanger.
Doing so may damage this instrument or the hanger.
Lowest key
Highest key
A
5
Highest key
A5
PHONES
Standard stereo phone plug
Bottom surface
Basic Operations
12
YDP-162/142 Owner’s Manual
ENGLISH
Playing the Piano
Setting the Volume
When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Intelligent Acoustic Control (I.A.C.)
Default setting: OnWith this function, the sound quality of this instrument is automatically adjusted and
controlled according to the overall volume. Even when the volume is low, this lets you hear
both low sounds and high sounds clearly.
To turn on I.A.C.:
While holding down [PIANO/VOICE], press
the F
0 key.
To turn off I.A.C.:
While holding down [PIANO/VOICE], press
the F0 key.
Setting range:
A-1 (–3) ~ D
0 (+3)
Default Setting: C0 (0)
To adjust I.A.C. Depth:
While holding down [PIANO/VOICE] press
one of the A-1 - D
0 keys.
The higher the value, the more clearly that low and high sounds are heard at lower volume
levels.
Level
decreases.
Level
increases.
F
#
0
Lowest key
F0 Lowest key
C0: depth 0
Lowest key
A-1: depth –3
D
0: depth +3
(Standard setting)
YDP-162/142 Owner’s Manual
Basic Operations
13
ENGLISH
Using the Pedals
NOTE
If the damper pedal doesn’t
work, make sure that the
pedal cord is properly
plugged into the main unit
(page 30).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
Damper Pedal (Right)
Pressing this pedal will sustain notes longer. Releasing
this pedal immediately stops (damps) any sustained
notes. This pedal also features a “half-pedal” function
that creates partial sustain effects, depending on how
far down you press the pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will sustain
the pressed notes (as if the Damper Pedal had been
pressed), but all subsequently played notes will not be
sustained. This makes it possible to sustain a chord or
single low note, for example, while the other notes are
played “staccato.”
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The
notes played before this pedal is pressed are not affected. When you select the Jazz
Organ Voice, pressing the left pedal switches between fast/slow rotation of the rotary
speaker (page 16).
Using the Damper Resonance
The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing
the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument.
Default setting:
OnTo turn on the Damper Resonance:
While holding [PIANO/VOICE], press the G
2 key.
To turn off the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
Half-pedal function
This function allows you to
vary the sustain length
depending on how far the
pedal is pressed. The
farther down you press the
pedal, the more the sound
sustains. For example, if
you press the damper pedal
and all notes you are
playing sound a bit murky
and loud with too much
sustain, you can release the
pedal half way or higher to
decrease the sustain
(murkiness).
When you press the damper
pedal here, this note and the
notes you play before you
release the pedal sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
Lowest key
G2
(Off)
G
2
(On)
Basic Operations
14
YDP-162/142 Owner’s Manual
ENGLISH
Using the Metronome
The metronome feature is convenient for practicing with an accurate tempo.
1 Press [METRONOME] to start the Metronome.
2 Press [METRONOME] to stop the Metronome.
Default setting: 0 (C3)
Selecting a Beat
While holding down [METRONOME], press one of the C3-F3 keys.
Adjusting the Tempo
The Metronome tempo can be set from 5 to 280 beats per minute.
To increase or decrease the value by 1:
While the metronome is playing, press [+R] to increase or [–L] to decrease. Alternatively,
press and hold down [METRONOME], and press the C
5 key to increase or B4 key to
decrease.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 key to increase or the A
4 key to decrease.
To specify a three-digit value:
While holding down [METRONOME], press the relevant C4–A4 keys one by one in order.
For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in order.
Resetting the value to the default (120)
While holding down [METRONOME], press the [+R] and [–L] simultaneously, or press the
C5 (default) key.
Setting range:
C1 (1) ~ G2 (20)
Default setting:
D2 (15)
Adjusting the Volume
While holding down [METRONOME], press one of the keys between C1 and G2 to set the
volume of the metronome. Pressing a higher key results in higher volume, while pressing a
lower key results in lower volume.
024579
8631
24 7
1356
9
11
8
10
12
14 16 19
15 17 18 2013
C
3
C3
Highest key
D
3
D3 E3 F3
A
4
C4
C
5
F4 A4
C5
D5B4Lowest key C1 G2
Adjusting the Metronome
Volume
Selecting
a Beat
Adjusting
the Tempo
Key Beat
C3 0
C
32
D3 3
D
34
E3 5
F3 6
YDP-162/142 Owner’s Manual
Basic Operations
15
ENGLISH
Changing the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).
NOTE
This setting is disabled with
some Voices, such as an
organ sound.
Default setting:
B6 (Medium)
While holding down [PIANO/VOICE], press one of the A6-C7 keys.
Maintenance
To keep your ARIUS in optimum condition, we recommend that you periodically follow the maintenance points below.
Instrument and Bench Maintenance
When cleaning the instrument, use a soft, dry or slightly damp cloth.
NOTICE
Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
In the case of a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard since
small particles of dirt can scratch the instrument’s finish.
To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s
surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the instructions
for proper usage.
Tighten the screws of the instrument and bench periodically.
Pedal Cleaning
As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a
compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted
to match other instruments). This is because the pitch of digital instruments is always maintained perfectly.
When transporting
You can load this instrument onto a truck, either fully
assembled or disassembled. When doing so, do not lean
the instrument (especially the keyboard unit) against a
wall, and make sure to lay it horizontally in the truck. When
transporting by truck, do not subject the instrument to
excessive vibration or shock. If you transport the
instrument fully assembled, make sure to check all the
screws then tighten them as necessary.
A6 C7
B6
A
6
Key Touch Sensitivity Description
A6 Fixed
The volume level does not change at all regardless of whether you play the keyboard soft
or hard.
A
6SoftThe volume level does not change much when you play the keyboard soft or hard.
B6 Medium This is the standard piano touch response.
C7 Hard
The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic
and dramatic expression. You have to hit the keys hard to produce a loud sound.
Advanced Operations
16
YDP-162/142 Owner’s Manual
ENGLISH
Playing Various Musical Instrument Sounds
(Voices)
Selecting a Voice
NOTE
To hear the characteristics of
the Voices, play back the
Demo Songs (page 17).
To select “Grand Piano 1”:
Simply press [PIANO/VOICE].
To select another Voice:
After pressing [PIANO/VOICE], press [+R] or [–L] to select the next or previous Voice.
To select a specific Voice:
While holding down [PIANO/VOICE], press one of the C1–A1 keys. For details on which
Voice is assigned to each key, see the list below.
Voice List
C
1D
1F
1G
1
C1 D1 E1 F1 G1 A1
Lowest key
Key Voice Name Voice description
C1 Grand Piano 1
This sound was sampled from a full concert grand piano. It uses different samples
depending on the strength of your playing and produces smoother tonal changes.
Suitable not only for classical compositions but also for piano pieces of any style.
C
1 Grand Piano 2 Warm and soft piano sound. Good for playing ballads.
D1 Grand Piano 3 Spacious and clear piano with bright reverb. Good for popular music.
D
1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for standard popular music.
E1 E.Piano 2
The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when
played lightly, and an aggressive tone when played hard.
F1 Harpsichord
The definitive instrument for baroque music. Since harpsichord uses plucked strings,
there is no touch response. There is, however, a characteristic additional sound when
the keys are released.
F
1 Vibraphone
Vibraphone played with relatively soft mallets. The tone becomes more metallic the
harder you play.
G1 Pipe Organ
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music
from the Baroque period.
G
1 Jazz Organ
The sound of a “tonewheel” type electric organ. Often heard in jazz and rock music.
The rotary speed of the rotary speaker effect can be switched by using the left pedal.
A1 Strings
Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining this
Voice with piano in the Dual mode.
YDP-162/142 Owner’s Manual
Advanced Operations
17
ENGLISH
Listening to the Demo Songs
NOTE
If you want to change the
playback tempo, see page 14.
Special individual Demo Songs are provided for all of the instrument Voices.
1 Press [DEMO/SONG] to start playback.
The [PLAY] lamp lights up, and the Demo Song for the current Voice starts.
Starting with the selected song, the playback of the Demo Songs will continue. After
the last demo song, the sequence then returns to the first Demo Song and repeats
until you stop it.
To change the Demo Song during playback:
Press the [+R] or [–L] to change to the next or previous Demo Song. To change to a
specific Demo Song, press and hold down the [DEMO/SONG], then press one of
the C1 - A1 keys.
2 Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY] lamp turns off.
Demo Song List
The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original
Demo Songs are Yamaha originals (©2012 Yamaha Corporation).
Lowest key C1 F1 A1
Key Voice Name Title Composer
C1 Grand Piano 1 Mazurka No.5 op.7-1 F. F. Chopin
C
1 Grand Piano 2 Von fremden Landern und Menchen, Kinderszenen op.15-1 R. Schumann
D1 Grand Piano 3 Original Original
D
1 E.Piano 1 Original Original
E1 E.Piano 2 Original Original
F1 Harpsichord
Concerto a cembalo obbligato, 2 violini, viola e continuo No.7,
BWV.1058
J. S. Bach
F
1 Vibraphone Original Original
G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV.601 J.S.Bach
G
1 Jazz Organ Original Original
A1 Strings Original Original
Advanced Operations
18
YDP-162/142 Owner’s Manual
ENGLISH
Adding Variations to the Sound (Reverb)
This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic
acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the
Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired.
[REVERB] in Dual Mode
An optimum reverb type for
the combination of Voices is
assigned automatically.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2–E2 keys.
Reverb Type List
To adjust Reverb Depth:
Reverb Depth range:
0 (no effect) - 20 (maximum
depth)
While holding down [PIANO/VOICE], press one of the C3–G
4 keys. The Depth value
increases as you press higher keys.
While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most
suitable value for the current Voice.
Lowest key
C3: depth 0
G
4: depth 20
A4
The depth value increases as you
press higher keys.
C
2D
2
C2 D2 E2
Selecting a
Reverb Type
Adjusting
Reverb Depth
Highest key
Key Reverb Type Description
C2 Room
Adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C
2Hall1
For a “bigger” reverb sound, use the Hall1 setting. This effect
simulates the natural reverberation of a small-size concert
hall.
D2 Hall2
For a truly spacious reverb sound, use the Hall2 setting. This
effect simulates the natural reverberation of a large concert
hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
YDP-162/142 Owner’s Manual
Advanced Operations
19
ENGLISH
Transposing the Pitch in Semitones
You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in difficult key signatures,
or to easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected,
playing key C produces pitch F, letting you play a song of F major as though it were in C major.
To transpose the pitch down:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F
2 (–6) and B2 (–1).
To transpose the pitch up:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C
3 (+1) and F
3 (+6).
To restore the normal pitch:
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to
that of other instruments or CD music.
Setting range:
414.8 – 466.8 Hz
Default Setting:
A3 = 440.0 Hz
To tune up (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+R].
To tune down (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[–L].
To set the pitch to 442.0 Hz:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
the A0 key.
To restore default pitch:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+R] and [–L] simultaneously.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F
2C3
Lowest key
F
3
Transpose down Transpose up
Normal pitch
Hz (Hertz):
This unit of measurement
refers to the frequency of a
sound and represents the
number of times a sound
wave vibrates in a second.
A0
Lowest key
Advanced Operations
20
YDP-162/142 Owner’s Manual
ENGLISH
Layering Two Voices (Dual mode)
You can layer two Voices and play them simultaneously to create a more richly textured sound.
1 Engage the Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys between
C1 and A1 to select the two desired Voices. For information on which Voices are
assigned to the keys, refer to “Voice List” (page 16).
NOTE
The Dual and Duo modes
(page 21) cannot be engaged
at the same time.
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the
same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5-F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F
5–F
6 keys.
A setting of “0” produces an equal balance between two Voices. Settings below “0”
increase the volume of Voice 2 while settings above “0” increase the volume of
Voice1, in relation to the other.
2 To exit from Dual mode, press [PIANO/VOICE].
-5
-60-4-2-1
+1 +3 +6
-3 -1-1 00+2+1 +1 +4 +5
C5 F5
Highest keyC1 F1 A1Lowest key
F
5C6 F
6
Engaging
Dual mode
Shifting
the octave
Adjusting
the balance
Voice 1
Voice 2
YDP-162/142 Owner’s Manual
Advanced Operations
21
ENGLISH
Playing Duo
This function allows two different players to play the instrument, one on the left and the other on the right, over the same
octave range.
NOTE
Since Duo is designed for two-
player piano performance
(unlike the similar Dual
function), different Voices
cannot be assigned to the
Right Voice and Left Voice.
1 While holding down [PIANO/VOICE], press [+R] and [–L]
simultaneously to engage Duo.
The keyboard is divided into two sections, with the E3 key as the Split Point.
NOTE
The Split Point cannot be
changed from E3.
NOTE
If the keyboard is in Dual,
engaging Duo will exit from
Dual. The Voice 1 is used as
the Voice of the entire
keyboard.
2 One person should play the left section of the keyboard while
the other plays the right.
To shift the Octave for each Voice:
Same operation as in Dual (page 20).
To adjust the volume balance between two keyboard sections:
Same operation as in Dual (page 20).
Pedal function in Duo
Damper Pedal: Applies Sustain to the right section.
Sostenuto Pedal: Applies Sustain to both sections.
Soft Pedal: Applies Sustain to the left section.
3 To exit from Duo, simultaneously hold down [PIANO/VOICE]
and press [+R] and [–L].
Split Point E3Equivalent to C3 (middle C) Equivalent to C3 (middle C)
Left Voice (Voice 2) Right Voice (Voice 1)
Advanced Operations
22
YDP-162/142 Owner’s Manual
ENGLISH
Song Playback and Practice
Listening to 50 Preset Songs
In addition to the Demo Songs, Preset Songs are provided for your listening pleasure.
1 Find the number of the Song that you want to play back from
the included “50 greats for the Piano.”
The number of each piano Preset Song is assigned to the C2–C
6 keys.
NOTE
You can play the keyboard
along with the preset Song.
You can also change the Voice
playing on the keyboard.
2 While holding down [DEMO/SONG], press one of the C2–C
6
keys to start playback.
The [PLAY], [+R] and [–L] lamps light, and playback continues the sequence:
starting with the selected song, the playback of the Preset Songs will continue. After
the last Preset Song, the sequence then returns to the first Preset Song and repeats
until you stop it.
NOTE
You can import additional
Songs by loading SMF files
from a computer. For details,
refer to the Computer-related
Operations manual (page 7).
To change the Preset Song during playback:
Press [+R] or [–L] to change to the next or previous Preset Song.
To change the tempo during playback:
Press [METRONOME] to start the Metronome, then press [+R] or [–L] to increase or
decrease the Tempo value by 1. Other instructions are same as those of the
Metronome Tempo (page 14).
To play back from the beginning of the Song at the desired tempo for
practice:
During playback, press [+R] and [–L] simultaneously to jump to the playback
position at the beginning of the Song then continue playback at the last specified
tempo.
3 Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY], [+R] and [–L] lamps turn off.
Highest
key (C7)
Song 1 Song 10 Song 20 Song 30 Song 40
C3 C4 C5
C2
Song 50 (C
6)
YDP-162/142 Owner’s Manual
Advanced Operations
23
ENGLISH
Practicing a One-Hand Part
All the Songs except for the Demo (page 17) let you turn on or off the left-hand and right-hand Parts individually.
By turning off [+R], for example, you can practice the right-hand Part while the left-hand Part is playing back, and vice
versa.
NOTE
Selecting another Song will
reset the on/off status.
1 Select a Preset Song (page 22) or the User Song (page 24).
2 While holding down [PLAY], press [+R] or [–L] to turn the Part
on/off.
Pressing the same button repeatedly while holding down [PLAY] toggles playback
on and off. The lamp of the button lights to indicate that the corresponding Part is
on.
3 Practice the Part which is turned off.
To change the Tempo:
If desired, you can change the tempo for your practice convenience. For details,
refer to page 14.
4 Press [PLAY] to stop playback.
Playing from the top of the bar
including a rest or blank
NOTE
Default setting:
On
This Quick Play feature enables you to specify whether a Song should play back
immediately from the very first note, or play back any silence or rests that exist before the
first note.
To turn on Quick Play:
Hold down [DEMO/SONG] and press the A
-1 key to enable immediate playback from the
first note or first pedal operation.
To turn off Quick Play:
Hold down [DEMO/SONG] and press the lowest key (A-1) to play from the top of the first
measure (including a rest or blank).
or
Lamp lights when Part is on.
A
-1
Lowest key
A-1Lowest key
Advanced Operations
24
YDP-162/142 Owner’s Manual
ENGLISH
Recording Your Performance
This instrument lets you record your keyboard performance as the User Song. Up to two Parts (left-hand and right-hand)
can be recorded separately.
Recording Your Performance
Recording Capacity
This instrument can record up
to 100KB (approximately
11,000 notes).
NOTE
You can use the Metronome
while recording; however, the
Metronome sound will not be
recorded.
NOTICE
If a Part contains data, the
Part lamp lights. Note that the
Recording operation will
replace already-recorded data
with the new data.
NOTE
If the keyboard is in the Duo
mode (page 21), the data will
be recorded to each Part. The
Part for recording cannot be
specified.
1 Select the desired Voice and other parameters, such as beat,
for recording.
For instructions on selecting a Voice, refer to page 16. If necessary, set other
parameters, such as beat and effects, in this step.
2 While holding down [REC], press [+R] or [–L] to engage
Record Ready mode for the Part you want to record.
If you do not intend to record right- and left-hand Parts separately, record the entire
performance to either Part.
Recording the right-hand Part ([+R])
Recording the left-hand Part ([–L])
After a while, the [REC] lamp and the selected Part lamp will flash at the current
tempo.
To exit from Record Ready mode:
Simply press [REC].
If data has already been recorded to the other Part:
The data in this Part will be played back while recording.
3 Play the keyboard or press [PLAY] to start recording.
The [REC] lamp lights up while the Recording Part lamp flashes at the current
tempo.
NOTICE
Never turn off the power while
the recorded data is being
stored (while the lamps are
flashing). Otherwise, all
recorded data will be lost.
4 Press either [REC] or [PLAY] to stop recording.
The [REC], [PLAY], [+R] and [–L] lamps flash, indicating that the recorded data is
being stored. After the Save operation is completed, the lamps will turn off,
indicating that the Record operation has been completed.
or
YDP-162/142 Owner’s Manual
Advanced Operations
25
ENGLISH
5 If desired, record the other Part by repeating Steps 1–4.
NOTE
The recorded Song data can
be saved to computer as a
Standard MIDI file (SMF). For
details, refer to the Computer-
related Operations manual
(page 7).
6 To hear the recorded Song, press [PLAY] to start playback.
Press [PLAY] again to stop playback.
Changing the Initial Settings of the Recorded Song
The settings of the following parameters can be changed after the Record operation is completed.
- For individual Parts: Voice, Dual Voices, Reverb Depth
- For the entire Song: Tempo, Reverb Type
1 Make the settings of the above parameters.
2 While holding down [REC], press the desired Part button to
engage Record Ready mode.
In this status, do not press [PLAY] again or any key. Otherwise, the originally
recorded performance data will be deleted.
3 Press [REC]+[PLAY] again to exit from Record Ready mode.
Deleting Recorded Data
To delete the entire Song:
1 While holding down [REC], press [DEMO/SONG].
The [+R] and [–L] lamps flash.
To exit from this status, press [–L].
2 Press [+R] to delete the data of the entire Song.
The [REC], [PLAY], [+R] and [–L] lamps flash.
After the operation is completed, all lamps turn off.
To delete a specific Part:
1 While holding down [REC], press [+R] or [–L] (depending on
the Part you want to delete) to engage Record Ready mode.
The [REC] and the selected Part ([+R] or [–L]) lamps flash.
2 Press [PLAY] to start recording without playing the keyboard.
The selected Part ([+R] or [–L]) lamp flashes.
3 Press [REC] or [PLAY] to stop recording.
All data recorded for the selected Part will be deleted, and the lamp turns off.
Advanced Operations
26
YDP-162/142 Owner’s Manual
ENGLISH
Backing up Data and Initializing the Settings
Data Maintained When Power is Turned Off
The following settings and data are maintained even if you turn the power off.
Metronome Volume
Metronome Beat
Touch Sensitivity
•Tuning
Intelligent Acoustic Control Depth
Intelligent Acoustic Control On/Off
Auto Power Off Enable/Disable
User Song data
Song data (SMF Files) loaded from a computer
Saving the User Song data to a computer
NOTICE
Saved data may be lost due to
malfunction or incorrect
operation. Save important
data to an external device
such as a computer.
Among the data listed above, only the User Song data can be transferred to a computer
and saved as a SMF file. For details, refer to “Computer-related Operations” on the
website (page 7).
Transferring SMF Files Between a Computer and this
Instrument
With Musicsoft Downloader (available for free downloading), up to 10 SMF files can be
transferred from the computer to the internal memory of this instrument, and vice versa.
For details, refer to the “Computer-related Operations” downloadable from Yamaha
Manual Library (page 7).
Initializing the Settings
NOTICE
Never turn off the power while
the Initialize operation is being
executed (that is, while the
[REC] and [PLAY] lamps are
flashing).
NOTE
If this instrument somehow
becomes disabled or
malfunctions, turn off the
power then execute
Initialization.
With this operation, all data (with the exception of the Songs) will be reset to the factory
default settings.
To do this, simultaneously hold down the C7 (the highest) key and turn on the power.
C7
Highest key
YDP-162/142 Owner’s Manual
Appendix
27
ENGLISH
Troubleshooting
Problem Possible Cause and Solution
Power suddenly and unexpectedly turns off.
This is normal and the Auto Power Off function may have been activated (page
11). If desired, disable the Auto Power Off function.
The instrument does not turn on.
Securely insert the adaptor plug into the socket on this instrument, and the
adaptor plug into a proper AC outlet (page 10).
A click or pop is heard when the power is turned
on or off.
This is normal when electrical current is being applied to the instrument.
Noise is heard from the speakers or headphones.
The noise may be due to interference caused by the use of a mobile phone in
close proximity to this instrument. Turn off the mobile phone, or move it further
away from this instrument.
Noise is heard from the instrument’s speakers or
headphones when using the instrument with the
application on iPhone/iPad.
When you use the instrument along with the application on your iPhone/iPad, we
recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to
avoid noise caused by communication.
The overall volume is low, or no sound is heard.
The Master Volume is set too low. Set it to an appropriate level using the [MASTER
VOLUME] knob (page 12).
Make sure a pair of headphones is not connected to the headphones jack
(page 11).
Make sure that Local Control is On. For details, refer to the "MIDI Reference"
(page 7).
Pedals do not function.
The pedal cord may not be securely connected to the [TO PEDAL] jack. Be sure to
insert the pedal cord all the way until the metal part of the cord plug disappears
from view (page 30).
The damper pedal does not function as expected.
The damper pedal was pressed when the power was turned on. This is not a
malfunction; release the pedal and press it again to reset the function.
YDP-162/142 Owner’s Manual
28
Appendix
ENGLISH
Keyboard Stand Assembly
The illustrations here are taken from the YDP-142.
CAUTION
Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance
with the sequence given below.
Assembly should be carried out by at least two persons.
Assemble the stand on a hard and flat floor with ample space.
Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of
incorrect screws can cause damage or malfunction of the product.
Be sure to tighten up all screws upon completing assembly of each unit.
To disassemble, reverse the assembly sequence given below.
Remove all parts from the package and make sure you
have all of the items.
1 Attach (finger-tighten) C to D and E.
1-1 Untie and straighten out the bundled pedal cord.
Don’t discard the vinyl tie. You will need it later in
step 6.
1-2 Align D and E with each end of C.
1-3 Attach D and E to C by finger-tightening the long
screws (6 × 20mm).
Have a Phillips-head (+) screwdriver ready
B
A
DE
C
Bundled pedal cord inside
AC power adaptor
(YDP-142)
Power cord
(YDP-162)
AC power adaptor
(YDP-162)
* The adaptor may not be included, or may look different from the
illustration above, depending on your particular area.
Please check with your Yamaha dealer.
Assembly Parts
6 × 20 mm long screws × 4
6 ×16 mm short screws × 4
4 ×12 mm thin screws ×2
4 × 20 mm tapping screws ×4
Cord holders × 2
Headphone hanger set (YDP-162 only)
4×10 mm thin screws
Headphone hanger
C
D
E
1-2
1-3
1-1
YDP-162/142 Owner’s Manual
Appendix
29
ENGLISH
2 Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may be
different from the other side. In this case, position B so
that the side of the surface color similar to D and E
faces the player.
2-1 Place the lower side of B on each foot of D and E,
then attach the upper side to D and E.
2-2 Attach the top of B to D and E by finger-tightening
the thin screws (4 × 12mm).
2-3 While pushing the lower part of D and E from
outside, secure the bottom ends of B using two
tapping screws (4 × 20mm).
2-4 Insert the other two tapping screws (4 × 20mm)
into the other two screw holes to secure B.
2-5 Securely tighten the screws on the top of B that
were attached in Step 2-2.
3 Secure C.
Securely tighten the screws on C that were
attached in Step
1-3.
4 Mount A.
5 Secure A.
5-1 Adjust the position of A so that the left and right
ends of A will project beyond D and E equally
when seen from the front.
5-2 Secure A by tightening the short screws
(6 × 16mm) from the front.
B
D
E
2-2, 2-5
2-1
2-3
2-4
2-3
Place the
bottom ends
of the rear
panel on
each foot.
B
C
3
CAUTION
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
Do not hold the keyboard in any position other
than the position shown in the illustration.
A
B
D
E
At least
10 cm
At least
10 cm
Be sure to place your hands at least
10 cm from either end of the main unit
when positioning it.
5-1
5-2
A
Projection of A
YDP-162/142 Owner’s Manual
30
Appendix
ENGLISH
6 Connect the pedal cord and the AC power
adaptor.
6-1 Insert the pedal cord plug to the pedal connector
from the rear.
6-2 Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
6-3
Use a vinyl tie to take up any slack in the pedal cord.
6-4 Insert the DC plug of the AC power adaptor into
the DC IN jack.
7 Set the adjuster.
Rotate the adjuster until it comes in firm contact with
the floor surface.
8 Attach the headphone hanger. (YDP-162 only)
Use the included two screws (4 x 10 mm) to attach the
hanger as shown in the illustration.
After completing the assembly, please
check the following.
Connecting the pedal cord
Insert the pedal cord securely until the metal part of the
cord plug disappears from view. Otherwise, the pedal
may not function properly.
6-1
6-3
6-2
6-4
Insert the cord all the
way until the metal part
of the plug disappears
from view.
Are there any parts left over?
Review the assembly procedure and correct any
errors.
Is this instrument clear of doors and other movable
fixtures?
Move the instrument to an appropriate location.
Does this instrument make a rattling noise when you
shake it?
Tighten all screws.
Does the pedal box rattle or give way when you step
on the pedals?
Turn the adjuster so that it is set firmly against the
floor.
Are the pedal and power cords inserted securely into
the sockets?
Check the connection.
If the main unit creaks or is otherwise unsteady when
you play on the keyboard, refer to the assembly
diagrams and retighten all screws.
PH
O
N
E
S
YDP-162/142 Owner’s Manual
Appendix
31
ENGLISH
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
Key cover
Top po r ti on
Do not hold
here
Do not hold
here
Hold here
YDP-162/142 Owner’s Manual
32
Appendix
ENGLISH
Specifications
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or
modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in
every locale, please check with your Yamaha dealer.
YDP-162 YDP-142
Size/Weight
Width 1357 mm (53-7/16")
Height
[For models
with polished
finish]
Without Music Rest 845 mm (33-1/4") [847 mm (33-3/8")] 815 mm (32-1/16")
With Music Rest 999 mm (39-5/16") [1001 mm (39-7/16")] 969 mm (38-1/8")
Depth [For models with polished finish] 422 mm (16-5/8")[423 mm (16-5/8")] 422 mm (16-5/8")
Weight [For models with polished finish] 42kg (92lbs., 10oz) [45kg (99lbs., 3oz)] 38kg (83lbs., 12oz)
Control
Interface
Keyboard
Number of Keys 88
Type
GH(Graded Hammer)
keyboard with Synthetic ivory keytops
GHS(Graded Hammer Standard)
keyboard with matte black keytops
Touch Sensitivity Hard/Medium/Soft/Fixed
Pedal
Number of Pedals 3
Half Pedal Yes
Functions Damper, Sostenuto, Soft
Panel Language English
Cabine
Key Cover Sliding
Music Rest Ye s
Voices
Tone Genera-
tion
Tone Generating
Te ch nolo gy
Pure CF Sound Engine
Polyphony Number of Polyphony (Max.) 128
Preset Number of Voices 10
Effects
Types
Reverb Yes
Damper Resonance Yes
Intelligent Acoustic Control
(IAC)
Ye s
Functions
Dual Yes
Duo Yes
Songs
Preset Number of Preset Songs 10 Demo Songs, 50 Piano Preset Songs
Recording
Number of Songs 1
Number of Tracks 2
Data Capacity One song approx. 100 KB (approx.11,000 notes)
Compatible
Data Format
Playback Standard MIDI File (SMF) Format 0 & 1
Recording Standard MIDI File (SMF) Format 0
Functions
Overall Con-
trols
Metronome Yes
Tempo Range 5 - 280
Transpose –6 - 0 - +6
Tuning Yes
Storage and
Connectivity
Storage Internal Memory
User song : One song approx. 100 KB
Loading song data from a computer : Up to 10 songs; Total maximum size approx. 900 KB
Connectivity
Headphones × 2
USB TO HOST Yes
Sound
System
Amplifiers 20 W x 2 6 Wx2
Speakers Oval (12cm x 6cm) x 2
Acoustic Optimizer Yes
Power
Supply
Power Supply AC power adaptor : PA-300C or an equivalent
AC power adaptor : Users within U.S or Europe:
PA-150 or an equivalent recommended by
Ya m a h a
Others: PA-5D, PA-150 or an equivalent
Power Consumption 13 W (when using the PA-300C) 9 W (when using the PA-150)
Auto Power Off Function Yes (approx. 30 minutes)
Accessories
Owner’s Manual, 50 greats for the Piano (Music Book), Quick Operation Guide, Bench (included or
optional depending on locale), Online Member Product Registration
AC power adaptor : PA-300C or an equivalent,
Power cord
(included or optional depending on locale)
AC power adaptor: PA-150 or an equivalent
(included or optional depending on locale)
Options
(May not be available depending on your locale.)
HPE-150 headphones
AC power adaptor PA-300C or an equivalent
AC power adaptor
Users within U.S or Europe: PA-150 or an equiva-
lent
Others: PA-5D, PA-150 or an equivalent
YDP-162/142 Owner’s Manual
Appendix
33
ENGLISH
Index
Numerics
50 Preset Songs ....................................................... 22
A
AC power adaptor ...................................................... 7
Accessories ............................................................... 7
Assembly ................................................................ 28
Auto Power Off ......................................................... 11
B
Beat ........................................................................ 14
C
Computer-related Operations ....................................... 7
D
Damper Pedal .......................................................... 13
Damper Resonance .................................................. 13
Delete ..................................................................... 25
Demo Song List ........................................................ 17
Demo Songs ............................................................ 17
Dual mode ............................................................... 20
Duo ......................................................................... 21
H
Half-pedal ................................................................ 13
Headphones ............................................................ 11
Hz (Hertz) ................................................................ 19
I
Initializing ................................................................ 26
Intelligent Acoustic Control (I.A.C.) ............................. 12
K
Key Cover .................................................................. 9
Keyboard Stand ....................................................... 28
L
Left-hand Part .......................................................... 23
M
Maintenance ............................................................ 15
Manuals .................................................................... 7
Metronome .............................................................. 14
MIDI Basics ............................................................... 7
MIDI Reference .......................................................... 7
O
Octave .................................................................... 20
Online Manuals (PDF) ................................................. 7
P
Panel Controls and Terminals ...................................... 8
PEDAL .................................................................... 30
Pedals ..................................................................... 13
Pitch ....................................................................... 19
Power ..................................................................... 10
Power indicator ........................................................ 10
Practice ................................................................... 23
Preset Songs ........................................................... 22
Q
Quick Operation Guide ............................................... 7
Quick Play ............................................................... 23
R
Recording ............................................................... 24
Reverb .................................................................... 18
Reverb Depth .......................................................... 18
Reverb Type ............................................................ 18
Reverb Type List ...................................................... 18
Right-hand Part ........................................................ 23
S
Soft Pedal ................................................................ 13
Sostenuto Pedal ....................................................... 13
Specifications .......................................................... 32
T
Tempo .................................................................... 14
Touch Sensitivity ...................................................... 15
Transpose ............................................................... 19
Troubleshooting ....................................................... 27
Tuning ............................................................... 15, 19
U
USB TO HOST ........................................................... 8
User Song ............................................................... 24
V
Voice ...................................................................... 16
Voice List ................................................................ 16
Volume .............................................................. 12, 14
(bottom_en_01)
(bottom_fr_01)
(bottom_es_01)
(weee_eu_en_01)
(weee_eu_fr_01)
(weee_eu_es_01)
The model number, serial number, power requirements, etc.,
may be found on or near the name plate, which is at the bottom
of the unit. You should note this serial number in the space pro-
vided below and retain this manual as a permanent record of
your purchase to aid identification in the event of theft.
Model No.
Serial No.
Le numéro de modèle, le numéro de série, l'alimentation req-
uise, etc., se trouvent sur ou près de la plaque signalétique du
produit, située dans la partie inférieure de l'unité. Notez le
numéro de série dans l'espace fourni ci-dessous et conservez
ce manuel en tant que preuve permanente de votre achat afin de
faciliter l'identification du produit en cas de
vol.
N° de modèle
N° de série
El número de modelo, el número de serie, los requisitos de aliment-
ación, etc. pueden encontrarse en la placa de identificación o cerca
de ella. Esta placa se encuentra en la parte inferior de la unidad.
Debe anotar dicho número en el espacio proporcionado
acontinuación y conservar este manual como comprobante perma-
nente de su compra para facilitar la identificación en caso de robo.
Nº de modelo
Nº de serie
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic
products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in
accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative
effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities
or dealer and ask for the correct method of disposal.
Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques.
Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou
électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et
électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation
nationale et aux Directives 2002/96/EC.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la
sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui
pourraient advenir lors d'un traitement inapproprié des déchets.
Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et
électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente
vous avez acheté les produits.
[Pour les professionnels dans l'Union Européenne]
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre
vendeur ou fournisseur pour plus d'informations.
[Information sur le traitement dans d'autres pays en dehors de l'Union Européenne]
Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez vous débarrasser de déchets
d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la
méthode de traitement appropriée.
Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo
Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos
electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes.
Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de
recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC.
Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto
negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su
servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos.
[Para usuarios de negocios en la Unión Europea]
Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor
para mayor información.
[Información sobre la Disposición en otros países fuera de la Unión Europea]
Este símbolo sólo es válido en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus
autoridades locales y pregunte por el método correcto de disposición.
Printed in Indonesia
303APGR*.*-**B0
ZE28920
© 2012 Yamaha Corporation
http://www.yamaha.com/
Yamaha Global Site
http://download.yamaha.com/
Yamaha Downloads
U.R.G., Digital Musical Instruments Division

Transcripción de documentos

ENGLISH FRANÇAIS ESPAÑOL YDP-162 YDP-142 Owner’s Manual Mode d’emploi Manual de instrucciones For information on assembling the keyboard stand, refer to the instructions at the end of this manual. EN Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel. FR Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual. ES ENGLISH Table of Contents PRECAUTIONS ........................................ 5 Song Playback and Practice..................22 Listening to 50 Preset Songs ........................................22 About the Manuals................................. 7 Practicing a One-Hand Part..........................................23 Included Accessories .............................. 7 Playing from the top of the bar including a rest or blank..............................................................23 Panel Controls and Terminals ................ 8 Recording Your Performance ...............24 Recording Your Performance........................................24 Changing the Initial Settings of the Recorded Song .....25 Basic Operations Deleting Recorded Data...............................................25 Key Cover ......................................................................9 Backing up Data and Initializing the Settings .................................................26 Music Rest .....................................................................9 Data Maintained When Power is Turned Off ................26 Turning the Power On .................................................10 Saving the User Song data to a computer ....................26 Auto Power Off ............................................................11 Transferring SMF Files Between a Computer and this Instrument...................................................................26 Setting Up .............................................. 9 Using Headphones.......................................................11 Initializing the Settings.................................................26 Playing the Piano ................................. 12 Setting the Volume ......................................................12 Intelligent Acoustic Control (I.A.C.)..............................12 Using the Pedals ..........................................................13 Using the Damper Resonance ......................................13 Using the Metronome..................................................14 Changing the Touch Sensitivity....................................15 Maintenance ........................................ 15 Appendix Troubleshooting ...................................27 Keyboard Stand Assembly....................28 Specifications ........................................32 Index .....................................................33 Advanced Operations Playing Various Musical Instrument Sounds (Voices) .................................... 16 Selecting a Voice ..........................................................16 Listening to the Demo Songs .......................................17 Adding Variations to the Sound (Reverb)......................18 Transposing the Pitch in Semitones ..............................19 Fine-tuning the Pitch ...................................................19 Layering Two Voices (Dual mode) ................................20 Playing Duo .................................................................21 2 YDP-162/142 Owner’s Manual This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Model Serial No. Purchase Date 92-BP (bottom) PLEASE KEEP THIS MANUAL ENGLISH SPECIAL MESSAGE SECTION FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Digital Piano Model Name : YDP-162, YDP-142 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) (class B) OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (standby) ENGLISH PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. ENGLISH PRECAUTIONS WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Water warning Power supply/AC power adaptor • Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. • Use the specified adaptor (page 32) only. Using the wrong adaptor can result in damage to the instrument or overheating. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. • Do not expose the instrument to rain, use it near water or in damp or wet conditions, place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. Fire warning • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. Do not open • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into the instrument. - There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Location Power supply/AC power adaptor • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • Do not place the instrument in an unstable position where it might accidentally fall over. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • When transporting or moving the instrument, always use two or more people. Attempting to lift the instrument by yourself may damage your back, result in other injury, or cause damage to the instrument itself. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. • Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. Assembly • Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over. DMI-5 1/2 YDP-162/142 Owner’s Manual 5 • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. ENGLISH Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Using the bench (If included) • Do not place the bench in an unstable position where it might accidentally fall over. • Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or for any other purpose might result in accident or injury. • Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. Handling caution • Do not insert a finger or hand in any gaps on the key cover or instrument. Also take care that the key cover does not pinch your finger. • Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. • Keep special watch over any small children so that they don’t fall off the rear of the bench. Since the bench does not have a backrest, unsupervised use may result in accident or injury. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. ■ Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with the application on your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • In the case of a model with a polished finish, bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel. Use caution. • During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. ■ Saving data • Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a computer (see online manual, Computer-related Operations; page 7). Information ■ About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES. ■ About functions/data bundled with the instrument • Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original. ■ About this manual • The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. 6 YDP-162/142 Owner’s Manual DMI-5 2/2 ENGLISH Thank you for choosing the Yamaha ARIUS. In order to make the most of the performance potential and features of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference. About the Manuals This instrument has the following manuals. Included Manuals Owner’s Manual (this book) Explains how to use the instrument. Quick Operation Guide (separate sheet) Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding. Online Manuals (PDF) Computer-related Operations Includes instructions on connecting this instrument to a computer, and operations related to transferring song data, as well as MIDI functions such as MIDI channel and Local Control settings. MIDI Reference Contains the MIDI Data Format and MIDI Implementation chart. MIDI Basics (only in English, French and German) Contains basic explanations about MIDI. To obtain these manuals, access the Yamaha Downloads website, select your country, enter “YDP-142” or “YDP-162” in the Model Name box, then click [SEARCH]. Yamaha Downloads http://download.yamaha.com/ Included Accessories ❏ Owner’s Manual (this book) ❏ AC power adaptor *2 ❏ Quick Operation Guide (separate sheet) ❏ Power cord (YDP-162 only) ❏ “50 Greats for the Piano” (music book) ❏ Bench *2 ❏ Online Member Product Registration*1 *1 You will need the PRODUCT ID on the sheet in order to fill out the User Registration form. *2 May not be included depending on your particular area. Please check with your Yamaha dealer. YDP-162/142 Owner’s Manual 7 ENGLISH Panel Controls and Terminals The illustrations are taken from the YDP-142. 3 4 1 9 5 2 6 7 Rear YDP-142 8 $ Rear ) TO PEDAL 12V @ # Rear ! YDP-162 PHONES (Keyboard side) TO PEDAL (Keyboard side) (Keyboard side) 1 [ ] (Standby/On) switch..................... page 10 For turning the power on or setting to standby. 2 [MASTER VOLUME] knob.................... page 12 For adjusting the volume of the entire sound. 3 [DEMO/SONG] button .................. pages 17, 22 16V 8 [PLAY] button ........................................page 25 For playing back the recorded performance. 9 [FUNCTION] .........................................page 19 Simultaneously holding these two buttons and pressing the specified key sets will set the MIDI or Transpose parameters. For playing the Demo Songs and the Preset Songs. 4 [PIANO/VOICE] button ............pages 16, 18, 20 ) [PHONES] jacks .................................... page 11 For connecting a set of standard stereo headphones. For selecting a single Voice, two Voices for layering or a Reverb Type. 5 [METRONOME] button......................... page 14 For starting or stopping the metronome. 6 [+R], [–L] buttons ....................pages 16, 19, 23 • In general, these are for selecting the next or ! [USB TO HOST] terminal For connecting to a computer. For details, refer to “Computer-related Operations” (page 7). NOTICE Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used. previous Voice. • During Song playback, these are for selecting the next or previous Song, and (while holding down [PLAY]) turning on/off the right-hand and left-hand Parts individually. @ [TO PEDAL] jack ...................................page 30 For connecting the Pedal Cord. # DC IN jack..............................................page 10 For connecting the power adaptor. • During Metronome playback, these are for increasing or decreasing the Tempo. $ Pedals ....................................................page 13 For controlling expression and sustain, just as on an 7 [REC] button ......................................... page 24 For recording your keyboard performance. 8 YDP-162/142 Owner’s Manual acoustic piano. Basic Operations ENGLISH Setting Up Key Cover To open the key cover: Lift the cover slightly, then push and slide it to the end. To close the key cover: Slide the cover toward you and gently lower the cover over the keys. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. CAUTION • Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the cover and main unit. • Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other serious damage to the instrument. Music Rest To raise the music rest: 1 Pull the music rest up and toward yourself as far as it will go. 2 Flip down the two metal supports at the left and right on the rear of the music rest. 3 Lower the music rest so that it rests on the metal supports. To lower the music rest: 1 Pull the music rest toward yourself as far as it will go. 2 Raise the two metal supports (at the rear of the music rest). 3 Gently lower the music rest backward until it is all the way down. 3 1 1 3 2 2 CAUTION • Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music rest until it is all the way down. YDP-162/142 Owner’s Manual 9 Basic Operations ENGLISH Turning the Power On 1 Connect the plugs of the AC power adaptor in the order shown in the illustration. [YDP-162] 16 [YDP-142] DC IN jack (page 8) DC IN jack (page 8) AC outlet 2 Power cord AC power adaptor 1 1 3 The shape of the plug and outlet differ depending on locale. AC power adaptor 2 AC outlet WARNING Use the specified adaptor (page 32) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. NOTE Follow this procedure in reverse order when disconnecting the power adaptor. 2 Press the [ ] (Standby/On) switch to turn the power on. (Standby/On) switch Power indicator Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you’re ready to turn the power to standby, press the [ indicator turns off. ] (Standby/On) switch again for a second. The power CAUTION Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. 10 YDP-162/142 Owner’s Manual Basic Operations To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for approximately 30 minutes. If you do not want to use the Auto Power Off function, disable the function as described below. The setting (disabled or enabled) is retained even if the power is turned off. ENGLISH Auto Power Off NOTE Default setting: Enable Disabling Auto Power Off Turn the power of the instrument off. Then, while holding down the lowest key, press the [ ] (Standby/On) switch to turn on the power again so that the [REC] indicator flashes three times, indicating that the Auto Power Off function has been disabled. Lowest key You can also disable the Auto Power Off function without turning the power off, by simultaneously holding down [DEMO/SONG]  and [PIANO/VOICE] and pressing the A 5 key.  A5 Highest key Re-enabling Auto Power Off To enable the Auto Power Off function again, simultaneously hold down [DEMO/SONG] and [PIANO/VOICE] and press the A5 key. A5 Highest key Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, which automatically shuts off the speakers. CAUTION Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss. Bottom surface Using the headphone hanger (for YDP-162 only) PHONES You can hang the headphones on this instrument. Refer to “Keyboard Stand Assembly” on page 28 for instructions on installing the headphone hanger. NOTICE Do not hang anything other than the headphones on the hanger. Standard stereo phone plug Doing so may damage this instrument or the hanger. YDP-162/142 Owner’s Manual 11 Basic Operations ENGLISH Playing the Piano Setting the Volume When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound. Level decreases. Level increases. CAUTION Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged. Intelligent Acoustic Control (I.A.C.) With this function, the sound quality of this instrument is automatically adjusted and controlled according to the overall volume. Even when the volume is low, this lets you hear both low sounds and high sounds clearly. Default setting: On To turn on I.A.C.: While holding down [PIANO/VOICE], press  the F 0 key. F#0 Lowest key To turn off I.A.C.: While holding down [PIANO/VOICE], press the F0 key. Lowest key To adjust I.A.C. Depth: While holding down [PIANO/VOICE] press  one of the A-1 - D 0 keys. A-1: depth –3 Lowest key F0  D 0: depth +3 C0: depth 0 (Standard setting) The higher the value, the more clearly that low and high sounds are heard at lower volume levels. 12 YDP-162/142 Owner’s Manual Setting range:  A-1 (–3) ~ D 0 (+3) Default Setting: C0 (0) Basic Operations Damper Pedal (Right) Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops (damps) any sustained notes. This pedal also features a “half-pedal” function that creates partial sustain effects, depending on how far down you press the pedal. NOTE      If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the main unit (page 30). When you press the damper pedal here, this note and the notes you play before you release the pedal sustain longer. Sostenuto Pedal (Center) Pressing this pedal while holding the notes will sustain the pressed notes (as if the Damper Pedal had been pressed), but all subsequently played notes will not be sustained. This makes it possible to sustain a chord or single low note, for example, while the other notes are played “staccato.” When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. ENGLISH Using the Pedals Half-pedal function This function allows you to vary the sustain length depending on how far the pedal is pressed. The farther down you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way or higher to decrease the sustain (murkiness). Soft Pedal (Left) NOTE Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The notes played before this pedal is pressed are not affected. When you select the Jazz Organ Voice, pressing the left pedal switches between fast/slow rotation of the rotary speaker (page 16). While the sostenuto pedal is held, the organ and strings Voices sound continuously without decay after the notes have been released. Using the Damper Resonance The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing the damper pedal and playing the keyboard. This effect is applied to the entire sound of the instrument. To turn on the Damper Resonance: Default setting: On  While holding [PIANO/VOICE], press the G 2 key. To turn off the Damper Resonance: While holding [PIANO/VOICE], press the G2 key. Lowest key G2 (Off)  G2 (On) YDP-162/142 Owner’s Manual 13 Basic Operations ENGLISH Using the Metronome The metronome feature is convenient for practicing with an accurate tempo. 1 2 Press [METRONOME] to start the Metronome. Press [METRONOME] to stop the Metronome. Adjusting the Metronome Volume Selecting a Beat   C3 D3 2 4 7 9 11 14 16 C1 G2  A4 C5 1 3 19 1 3 5 6 8 10 12 13 15 17 18 20 Lowest key Adjusting the Tempo  6 8 0 2 4 5 7 9 C3 D3 E3 F3 C4 F4 A4 B4 C5 D5 Highest key Selecting a Beat While holding down [METRONOME], press one of the C3-F3 keys. Key Beat C3  C3 0 Default setting: 0 (C3) 2 D3  D3 3 E3 5 F3 6 4 Adjusting the Tempo The Metronome tempo can be set from 5 to 280 beats per minute. To increase or decrease the value by 1: While the metronome is playing, press [+R] to increase or [–L] to decrease. Alternatively,  press and hold down [METRONOME], and press the C 5 key to increase or B4 key to decrease. To increase or decrease the value by 10:  While holding down [METRONOME], press the D5 key to increase or the A 4 key to decrease. To specify a three-digit value: While holding down [METRONOME], press the relevant C4–A4 keys one by one in order. For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in order. Resetting the value to the default (120) While holding down [METRONOME], press the [+R] and [–L] simultaneously, or press the C5 (default) key. Adjusting the Volume While holding down [METRONOME], press one of the keys between C1 and G2 to set the volume of the metronome. Pressing a higher key results in higher volume, while pressing a lower key results in lower volume. 14 YDP-162/142 Owner’s Manual Setting range: C1 (1) ~ G2 (20) Default setting: D2 (15) Basic Operations You can specify the Touch Sensitivity (how the sound responds to the way you play the keys). While holding down [PIANO/VOICE], press one of the A6-C7 keys.  NOTE A6 This setting is disabled with some Voices, such as an organ sound. A6 C7 B6 ENGLISH Changing the Touch Sensitivity Default setting: B6 (Medium) Key Touch Sensitivity Description A6 Fixed The volume level does not change at all regardless of whether you play the keyboard soft or hard.  A6 Soft B6 Medium C7 Hard The volume level does not change much when you play the keyboard soft or hard. This is the standard piano touch response. The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. Maintenance To keep your ARIUS in optimum condition, we recommend that you periodically follow the maintenance points below. Instrument and Bench Maintenance • When cleaning the instrument, use a soft, dry or slightly damp cloth. NOTICE Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. • In the case of a model with a polished finish, gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the instrument’s finish. To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the instructions for proper usage. • Tighten the screws of the instrument and bench periodically. Pedal Cleaning As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage. Tuning Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted to match other instruments). This is because the pitch of digital instruments is always maintained perfectly. When transporting You can load this instrument onto a truck, either fully assembled or disassembled. When doing so, do not lean the instrument (especially the keyboard unit) against a wall, and make sure to lay it horizontally in the truck. When transporting by truck, do not subject the instrument to excessive vibration or shock. If you transport the instrument fully assembled, make sure to check all the screws then tighten them as necessary. YDP-162/142 Owner’s Manual 15 ENGLISH Advanced Operations Playing Various Musical Instrument Sounds (Voices) Selecting a Voice To select “Grand Piano 1”: NOTE Simply press [PIANO/VOICE]. To hear the characteristics of the Voices, play back the Demo Songs (page 17). To select another Voice: After pressing [PIANO/VOICE], press [+R] or [–L] to select the next or previous Voice. To select a specific Voice: While holding down [PIANO/VOICE], press one of the C1–A1 keys. For details on which Voice is assigned to each key, see the list below.  C1 Lowest key   D1 F1  G1 C1 D1 E1 F1 G1 A1 Voice List 16 Key Voice Name C1 Grand Piano 1  C1 Voice description This sound was sampled from a full concert grand piano. It uses different samples depending on the strength of your playing and produces smoother tonal changes. Suitable not only for classical compositions but also for piano pieces of any style. Grand Piano 2 Warm and soft piano sound. Good for playing ballads. D1  D1 Grand Piano 3 Spacious and clear piano with bright reverb. Good for popular music. E.Piano 1 An electronic piano sound created by FM synthesis. Good for standard popular music. E1 E.Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. F1 Harpsichord The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response. There is, however, a characteristic additional sound when the keys are released.  F1 Vibraphone Vibraphone played with relatively soft mallets. The tone becomes more metallic the harder you play. G1 Pipe Organ This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period.  G1 Jazz Organ The sound of a “tonewheel” type electric organ. Often heard in jazz and rock music. The rotary speed of the rotary speaker effect can be switched by using the left pedal. A1 Strings Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining this Voice with piano in the Dual mode. YDP-162/142 Owner’s Manual Advanced Operations Special individual Demo Songs are provided for all of the instrument Voices. 1 NOTE Press [DEMO/SONG] to start playback. If you want to change the playback tempo, see page 14. The [PLAY] lamp lights up, and the Demo Song for the current Voice starts. Starting with the selected song, the playback of the Demo Songs will continue. After the last demo song, the sequence then returns to the first Demo Song and repeats until you stop it. ENGLISH Listening to the Demo Songs To change the Demo Song during playback: Press the [+R] or [–L] to change to the next or previous Demo Song. To change to a specific Demo Song, press and hold down the [DEMO/SONG], then press one of the C1 - A1 keys. Lowest key 2 C1 F1 A1 Press [DEMO/SONG] or [PLAY] to stop playback. The [PLAY] lamp turns off. Demo Song List Key Voice Name Title Composer Grand Piano 1 Mazurka No.5 op.7-1 F. F. Chopin Grand Piano 2 Von fremden Landern und Menchen, Kinderszenen op.15-1 R. Schumann D1  D1 Grand Piano 3 Original Original E.Piano 1 Original Original E1 E.Piano 2 Original Original F1 Harpsichord Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV.1058 J. S. Bach  F1 Vibraphone Original Original G1  G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV.601 J.S.Bach Jazz Organ Original Original A1 Strings Original Original C1  C1 The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original Demo Songs are Yamaha originals (©2012 Yamaha Corporation). YDP-162/142 Owner’s Manual 17 Advanced Operations ENGLISH Adding Variations to the Sound (Reverb) This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired. To select a Reverb Type: [REVERB] in Dual Mode While holding down [PIANO/VOICE], press one of the C2–E2 keys. An optimum reverb type for the combination of Voices is assigned automatically. Selecting a Reverb Type   C2 Lowest key Adjusting Reverb Depth  G 4: depth 20 D2 C2 D2 E2 C3: depth 0 Highest key A4 The depth value increases as you press higher keys. Reverb Type List Key Reverb Type Description C2 Room Adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room.  C2 Hall1 For a “bigger” reverb sound, use the Hall1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2 For a truly spacious reverb sound, use the Hall2 setting. This effect simulates the natural reverberation of a large concert hall.  D2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied. To adjust Reverb Depth:  While holding down [PIANO/VOICE], press one of the C3–G 4 keys. The Depth value increases as you press higher keys. While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most suitable value for the current Voice. 18 YDP-162/142 Owner’s Manual Reverb Depth range: 0 (no effect) - 20 (maximum depth) Advanced Operations To transpose the pitch down:  While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F 2 (–6) and B2 (–1). ENGLISH Transposing the Pitch in Semitones You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in difficult key signatures, or to easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected, playing key C produces pitch F, letting you play a song of F major as though it were in C major. To transpose the pitch up:   While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C 3 (+1) and F 3 (+6). To restore the normal pitch: While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.  F2 -6 -4 -2  C3 F3 +1 +3 +6 -5 -3 -1 0 +2 +4 +5 Transpose down Lowest key Transpose up Normal pitch Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to that of other instruments or CD music. To tune up (in about 0.2 Hz steps): Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R]. Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: To tune down (in about 0.2 Hz steps): 414.8 – 466.8 Hz Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [–L]. Default Setting: A3 = 440.0 Hz To set the pitch to 442.0 Hz: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press the A0 key. Lowest key A0 To restore default pitch: Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R] and [–L] simultaneously. YDP-162/142 Owner’s Manual 19 Advanced Operations ENGLISH Layering Two Voices (Dual mode) You can layer two Voices and play them simultaneously to create a more richly textured sound. 1 Engage the Dual mode. While holding down [PIANO/VOICE], simultaneously hold down two keys between C1 and A1 to select the two desired Voices. For information on which Voices are assigned to the keys, refer to “Voice List” (page 16). Adjusting the balance Engaging Dual mode C5 F5 0 -1  F 5 C6 -6 -4 -2 +1 +3  F6 +6 -1 +1 0 +1 -5 -3 -1 0 +2 +4 +5 Lowest key C1 F1 A1 Voice 1 Voice 2 Highest key Shifting the octave The Voice assigned to the lower key will be designated as Voice 1, and the Voice assigned to the higher key will be designated as Voice 2. You cannot assign the same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode. To shift the Octave for each Voice: While holding down [PIANO/VOICE], press one of the C5-F5 keys. To adjust the Balance between two Voices:   While holding down [PIANO/VOICE], press one of the F 5–F 6 keys. A setting of “0” produces an equal balance between two Voices. Settings below “0” increase the volume of Voice 2 while settings above “0” increase the volume of Voice1, in relation to the other. 2 20 To exit from Dual mode, press [PIANO/VOICE]. YDP-162/142 Owner’s Manual NOTE The Dual and Duo modes (page 21) cannot be engaged at the same time. Advanced Operations This function allows two different players to play the instrument, one on the left and the other on the right, over the same octave range. 1 While holding down [PIANO/VOICE], press [+R] and [–L] NOTE simultaneously to engage Duo. Since Duo is designed for twoplayer piano performance (unlike the similar Dual function), different Voices cannot be assigned to the Right Voice and Left Voice. The keyboard is divided into two sections, with the E3 key as the Split Point. Equivalent to C3 (middle C) Split Point E3 Left Voice (Voice 2) 2 ENGLISH Playing Duo Equivalent to C3 (middle C) Right Voice (Voice 1) One person should play the left section of the keyboard while NOTE the other plays the right. The Split Point cannot be changed from E3. To shift the Octave for each Voice: NOTE Same operation as in Dual (page 20). If the keyboard is in Dual, engaging Duo will exit from Dual. The Voice 1 is used as the Voice of the entire keyboard. To adjust the volume balance between two keyboard sections: Same operation as in Dual (page 20). Pedal function in Duo • Damper Pedal: Applies Sustain to the right section. • Sostenuto Pedal: Applies Sustain to both sections. • Soft Pedal: Applies Sustain to the left section. 3 To exit from Duo, simultaneously hold down [PIANO/VOICE] and press [+R] and [–L]. YDP-162/142 Owner’s Manual 21 Advanced Operations ENGLISH Song Playback and Practice Listening to 50 Preset Songs In addition to the Demo Songs, Preset Songs are provided for your listening pleasure. 1 Find the number of the Song that you want to play back from the included “50 greats for the Piano.”  The number of each piano Preset Song is assigned to the C2–C 6 keys. 2  While holding down [DEMO/SONG], press one of the C2–C 6 keys to start playback. Song 1 Song 10 Song 20 Song 30 Song 40  Song 50 (C 6) NOTE You can play the keyboard along with the preset Song. You can also change the Voice playing on the keyboard. C2 C3 C4 C5 Highest key (C7) The [PLAY], [+R] and [–L] lamps light, and playback continues the sequence: starting with the selected song, the playback of the Preset Songs will continue. After the last Preset Song, the sequence then returns to the first Preset Song and repeats until you stop it. To change the Preset Song during playback: NOTE Press [+R] or [–L] to change to the next or previous Preset Song. You can import additional Songs by loading SMF files from a computer. For details, refer to the Computer-related Operations manual (page 7). To change the tempo during playback: Press [METRONOME] to start the Metronome, then press [+R] or [–L] to increase or decrease the Tempo value by 1. Other instructions are same as those of the Metronome Tempo (page 14). To play back from the beginning of the Song at the desired tempo for practice: During playback, press [+R] and [–L] simultaneously to jump to the playback position at the beginning of the Song then continue playback at the last specified tempo. 3 Press [DEMO/SONG] or [PLAY] to stop playback. The [PLAY], [+R] and [–L] lamps turn off. 22 YDP-162/142 Owner’s Manual Advanced Operations 1 2 Select a Preset Song (page 22) or the User Song (page 24). NOTE While holding down [PLAY], press [+R] or [–L] to turn the Part ENGLISH Practicing a One-Hand Part All the Songs except for the Demo (page 17) let you turn on or off the left-hand and right-hand Parts individually. By turning off [+R], for example, you can practice the right-hand Part while the left-hand Part is playing back, and vice versa. Selecting another Song will reset the on/off status. on/off. Pressing the same button repeatedly while holding down [PLAY] toggles playback on and off. The lamp of the button lights to indicate that the corresponding Part is on. or Lamp lights when Part is on. 3 Practice the Part which is turned off. To change the Tempo: If desired, you can change the tempo for your practice convenience. For details, refer to page 14. 4 Press [PLAY] to stop playback. Playing from the top of the bar including a rest or blank This Quick Play feature enables you to specify whether a Song should play back immediately from the very first note, or play back any silence or rests that exist before the first note. NOTE Default setting: On To turn on Quick Play:  Hold down [DEMO/SONG] and press the A -1 key to enable immediate playback from the first note or first pedal operation.  A -1 Lowest key To turn off Quick Play: Hold down [DEMO/SONG] and press the lowest key (A-1) to play from the top of the first measure (including a rest or blank). Lowest key A-1 YDP-162/142 Owner’s Manual 23 Advanced Operations ENGLISH Recording Your Performance This instrument lets you record your keyboard performance as the User Song. Up to two Parts (left-hand and right-hand) can be recorded separately. Recording Your Performance 1 Select the desired Voice and other parameters, such as beat, for recording. For instructions on selecting a Voice, refer to page 16. If necessary, set other parameters, such as beat and effects, in this step. 2 While holding down [REC], press [+R] or [–L] to engage Record Ready mode for the Part you want to record. If you do not intend to record right- and left-hand Parts separately, record the entire performance to either Part. Recording the right-hand Part ([+R]) Recording Capacity This instrument can record up to 100KB (approximately 11,000 notes). NOTE You can use the Metronome while recording; however, the Metronome sound will not be recorded. NOTICE If a Part contains data, the Part lamp lights. Note that the Recording operation will replace already-recorded data with the new data. NOTE or If the keyboard is in the Duo mode (page 21), the data will be recorded to each Part. The Part for recording cannot be specified. Recording the left-hand Part ([–L]) After a while, the [REC] lamp and the selected Part lamp will flash at the current tempo. To exit from Record Ready mode: Simply press [REC]. If data has already been recorded to the other Part: The data in this Part will be played back while recording. 3 Play the keyboard or press [PLAY] to start recording. The [REC] lamp lights up while the Recording Part lamp flashes at the current tempo. 4 Press either [REC] or [PLAY] to stop recording. The [REC], [PLAY], [+R] and [–L] lamps flash, indicating that the recorded data is being stored. After the Save operation is completed, the lamps will turn off, indicating that the Record operation has been completed. 24 YDP-162/142 Owner’s Manual NOTICE Never turn off the power while the recorded data is being stored (while the lamps are flashing). Otherwise, all recorded data will be lost. 5 If desired, record the other Part by repeating Steps 1–4. 6 To hear the recorded Song, press [PLAY] to start playback. NOTE The recorded Song data can be saved to computer as a Standard MIDI file (SMF). For details, refer to the Computerrelated Operations manual (page 7). Press [PLAY] again to stop playback. ENGLISH Advanced Operations Changing the Initial Settings of the Recorded Song The settings of the following parameters can be changed after the Record operation is completed. - For individual Parts: Voice, Dual Voices, Reverb Depth - For the entire Song: Tempo, Reverb Type 1 2 Make the settings of the above parameters. While holding down [REC], press the desired Part button to engage Record Ready mode. In this status, do not press [PLAY] again or any key. Otherwise, the originally recorded performance data will be deleted. 3 Press [REC]+[PLAY] again to exit from Record Ready mode. Deleting Recorded Data To delete the entire Song: 1 While holding down [REC], press [DEMO/SONG]. The [+R] and [–L] lamps flash. To exit from this status, press [–L]. 2 Press [+R] to delete the data of the entire Song. The [REC], [PLAY], [+R] and [–L] lamps flash. After the operation is completed, all lamps turn off. To delete a specific Part: 1 While holding down [REC], press [+R] or [–L] (depending on the Part you want to delete) to engage Record Ready mode. The [REC] and the selected Part ([+R] or [–L]) lamps flash. 2 Press [PLAY] to start recording without playing the keyboard. The selected Part ([+R] or [–L]) lamp flashes. 3 Press [REC] or [PLAY] to stop recording. All data recorded for the selected Part will be deleted, and the lamp turns off. YDP-162/142 Owner’s Manual 25 Advanced Operations ENGLISH Backing up Data and Initializing the Settings Data Maintained When Power is Turned Off The following settings and data are maintained even if you turn the power off. • Metronome Volume • Metronome Beat • Touch Sensitivity • Tuning • Intelligent Acoustic Control Depth • Intelligent Acoustic Control On/Off • Auto Power Off Enable/Disable • User Song data • Song data (SMF Files) loaded from a computer Saving the User Song data to a computer Among the data listed above, only the User Song data can be transferred to a computer and saved as a SMF file. For details, refer to “Computer-related Operations” on the website (page 7). NOTICE Saved data may be lost due to malfunction or incorrect operation. Save important data to an external device such as a computer. Transferring SMF Files Between a Computer and this Instrument With Musicsoft Downloader (available for free downloading), up to 10 SMF files can be transferred from the computer to the internal memory of this instrument, and vice versa. For details, refer to the “Computer-related Operations” downloadable from Yamaha Manual Library (page 7). Initializing the Settings With this operation, all data (with the exception of the Songs) will be reset to the factory default settings. To do this, simultaneously hold down the C7 (the highest) key and turn on the power. C7 NOTICE Never turn off the power while the Initialize operation is being executed (that is, while the [REC] and [PLAY] lamps are flashing). NOTE Highest key 26 YDP-162/142 Owner’s Manual If this instrument somehow becomes disabled or malfunctions, turn off the power then execute Initialization. Appendix Problem Possible Cause and Solution Power suddenly and unexpectedly turns off. This is normal and the Auto Power Off function may have been activated (page 11). If desired, disable the Auto Power Off function. The instrument does not turn on. A click or pop is heard when the power is turned on or off. ENGLISH Troubleshooting Securely insert the adaptor plug into the socket on this instrument, and the adaptor plug into a proper AC outlet (page 10). This is normal when electrical current is being applied to the instrument. Noise is heard from the speakers or headphones. The noise may be due to interference caused by the use of a mobile phone in close proximity to this instrument. Turn off the mobile phone, or move it further away from this instrument. Noise is heard from the instrument’s speakers or headphones when using the instrument with the application on iPhone/iPad. When you use the instrument along with the application on your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication. The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] knob (page 12). The overall volume is low, or no sound is heard. Make sure a pair of headphones is not connected to the headphones jack (page 11). Make sure that Local Control is On. For details, refer to the "MIDI Reference" (page 7). Pedals do not function. The pedal cord may not be securely connected to the [TO PEDAL] jack. Be sure to insert the pedal cord all the way until the metal part of the cord plug disappears from view (page 30). The damper pedal does not function as expected. The damper pedal was pressed when the power was turned on. This is not a malfunction; release the pedal and press it again to reset the function. YDP-162/142 Owner’s Manual 27 Appendix ENGLISH Keyboard Stand Assembly The illustrations here are taken from the YDP-142. CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Assemble the stand on a hard and flat floor with ample space. • Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of incorrect screws can cause damage or malfunction of the product. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. 1 Attach (finger-tighten) C to D and E. Have a Phillips-head (+) screwdriver ready Remove all parts from the package and make sure you have all of the items. 1-2 E A D D E C B 1-3 C Bundled pedal cord inside AC power adaptor (YDP-162) 1-1 Power cord (YDP-162) AC power adaptor (YDP-142) * The adaptor may not be included, or may look different from the illustration above, depending on your particular area. Please check with your Yamaha dealer. 1-1 Untie and straighten out the bundled pedal cord. Don’t discard the vinyl tie. You will need it later in step 6. Assembly Parts 1 6 × 20 mm long screws × 4 4 4 × 20 mm tapping screws ×4 1-2 Align D and E with each end of C. 2 6 ×16 mm short screws × 4 Cord holders × 2 3 4 ×12 mm thin screws ×2 Headphone hanger set (YDP-162 only) 4×10 mm thin screws 28 Headphone hanger YDP-162/142 Owner’s Manual 1-3 Attach D and E to C by finger-tightening the long screws 1 (6 × 20mm). Appendix 4 Attach B. Mount A. Be sure to place your hands at least 10 cm from either end of the main unit when positioning it. Depending on the model of digital piano you purchased, the surface color of one side of B may be different from the other side. In this case, position B so that the side of the surface color similar to D and E faces the player. 2-1 Place the lower side of B on each foot of D and E, then attach the upper side to D and E. A At least 10 cm 2-2 Attach the top of B to D and E by finger-tightening the thin screws 3 (4 × 12mm). E 2-3 While pushing the lower part of D and E from outside, secure the bottom ends of B using two tapping screws 4 (4 × 20mm). ENGLISH 2 At least 10 cm B 2-4 Insert the other two tapping screws 4 (4 × 20mm) into the other two screw holes to secure B. D 2-5 Securely tighten the screws on the top of B that were attached in Step 2-2. 2-1 2-2, 2-5 E CAUTION • Fingers can become pinched between the main unit and the rear or side panels, be extra careful so as not to drop the main unit. • Do not hold the keyboard in any position other than the position shown in the illustration. B Place the bottom ends of the rear panel on each foot. D 5 2-3 5-1 Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front. 2-4 2-3 3 Secure A. 5-2 Secure A by tightening the short screws 2 (6 × 16mm) from the front. 5-1 Secure C. Securely tighten the screws on C that were attached in Step 1-3. Projection of A A B C 5-2 3 YDP-162/142 Owner’s Manual 29 Appendix ENGLISH 6 Connect the pedal cord and the AC power adaptor. 7 Set the adjuster. 6-1 Insert the pedal cord plug to the pedal connector from the rear. 6-2 Attach the cord holders to the rear panel as shown, then clip the cord into the holders. 6-3 Use a vinyl tie to take up any slack in the pedal cord. 6-4 Insert the DC plug of the AC power adaptor into the DC IN jack. Rotate the adjuster until it comes in firm contact with the floor surface. 6-1 8 Attach the headphone hanger. (YDP-162 only) Use the included two screws (4 x 10 mm) to attach the hanger as shown in the illustration. PH O S NE 6-4 6-3 6-2 ■ After completing the assembly, please check the following. • Are there any parts left over?  Review the assembly procedure and correct any errors. ■ Connecting the pedal cord Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. Insert the cord all the way until the metal part of the plug disappears from view. • Is this instrument clear of doors and other movable fixtures?  Move the instrument to an appropriate location. • Does this instrument make a rattling noise when you shake it?  Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals?  Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets?  Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 30 YDP-162/142 Owner’s Manual Appendix ENGLISH When moving the instrument after assembly, always hold the bottom of the main unit. Key cover Top portion Do not hold here Hold here Do not hold here CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. YDP-162/142 Owner’s Manual 31 Appendix ENGLISH Specifications YDP-162 Width Without Music Rest Height [For models With Music Rest Size/Weight with polished finish] Depth [For models with polished finish] Weight [For models with polished finish] Number of Keys Keyboard Type Pedal Touch Sensitivity Number of Pedals Half Pedal Functions Language Control Interface Cabine Voices Panel Key Cover Music Rest Tone Generation Polyphony Preset Types Effects Functions Preset Songs Recording Compatible Data Format Functions Storage and Connectivity Sound System Power Supply Overall Controls Tone Generating Technology Number of Polyphony (Max.) Number of Voices Reverb Damper Resonance Intelligent Acoustic Control (IAC) Dual Duo Number of Preset Songs Number of Songs Number of Tracks Data Capacity Playback Recording Metronome Tempo Range Transpose Tuning Storage Internal Memory Connectivity Headphones USB TO HOST Amplifiers Speakers Acoustic Optimizer Power Supply Power Consumption Auto Power Off Function Accessories Options (May not be available depending on your locale.) YDP-142 1357 mm (53-7/16") 845 mm (33-1/4") [847 mm (33-3/8")] 815 mm (32-1/16") 999 mm (39-5/16") [1001 mm (39-7/16")] 969 mm (38-1/8") 422 mm (16-5/8")[423 mm (16-5/8")] 42 kg (92 lbs., 10 oz) [45 kg (99 lbs., 3 oz)] 422 mm (16-5/8") 38 kg (83 lbs., 12 oz) 88 GH(Graded Hammer) GHS(Graded Hammer Standard) keyboard with Synthetic ivory keytops keyboard with matte black keytops Hard/Medium/Soft/Fixed 3 Yes Damper, Sostenuto, Soft English Sliding Yes Pure CF Sound Engine 128 10 Yes Yes Yes Yes Yes 10 Demo Songs, 50 Piano Preset Songs 1 2 One song approx. 100 KB (approx.11,000 notes) Standard MIDI File (SMF) Format 0 & 1 Standard MIDI File (SMF) Format 0 Yes 5 - 280 –6 - 0 - +6 Yes User song : One song approx. 100 KB Loading song data from a computer : Up to 10 songs; Total maximum size approx. 900 KB ×2 Yes 20 W x 2 6 Wx2 Oval (12 cm x 6 cm) x 2 Yes AC power adaptor : Users within U.S or Europe: PA-150 or an equivalent recommended by AC power adaptor : PA-300C or an equivalent Yamaha Others: PA-5D, PA-150 or an equivalent 13 W (when using the PA-300C) 9 W (when using the PA-150) Yes (approx. 30 minutes) Owner’s Manual, 50 greats for the Piano (Music Book), Quick Operation Guide, Bench (included or optional depending on locale), Online Member Product Registration AC power adaptor : PA-300C or an equivalent, AC power adaptor: PA-150 or an equivalent Power cord (included or optional depending on locale) (included or optional depending on locale) HPE-150 headphones AC power adaptor Users within U.S or Europe: PA-150 or an equivaAC power adaptor PA-300C or an equivalent lent Others: PA-5D, PA-150 or an equivalent * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. 32 YDP-162/142 Owner’s Manual Appendix Numerics O 50 Preset Songs ....................................................... 22 Octave .................................................................... 20 Online Manuals (PDF) ................................................. 7 A AC power adaptor ...................................................... 7 Accessories ............................................................... 7 Assembly ................................................................ 28 Auto Power Off ......................................................... 11 P Computer-related Operations ....................................... 7 Panel Controls and Terminals ...................................... 8 PEDAL .................................................................... 30 Pedals ..................................................................... 13 Pitch ....................................................................... 19 Power ..................................................................... 10 Power indicator ........................................................ 10 Practice ................................................................... 23 Preset Songs ........................................................... 22 D Q B Beat ........................................................................ 14 C Damper Pedal .......................................................... 13 Damper Resonance .................................................. 13 Delete ..................................................................... 25 Demo Song List ........................................................ 17 Demo Songs ............................................................ 17 Dual mode ............................................................... 20 Duo ......................................................................... 21 H Half-pedal ................................................................ 13 Headphones ............................................................ 11 Hz (Hertz) ................................................................ 19 I Initializing ................................................................ 26 Intelligent Acoustic Control (I.A.C.) ............................. 12 K Key Cover .................................................................. 9 Keyboard Stand ....................................................... 28 L Left-hand Part .......................................................... 23 M Maintenance ............................................................ 15 Manuals .................................................................... 7 Metronome .............................................................. 14 MIDI Basics ............................................................... 7 MIDI Reference .......................................................... 7 ENGLISH Index Quick Operation Guide ............................................... 7 Quick Play ............................................................... 23 R Recording ............................................................... 24 Reverb .................................................................... 18 Reverb Depth .......................................................... 18 Reverb Type ............................................................ 18 Reverb Type List ...................................................... 18 Right-hand Part ........................................................ 23 S Soft Pedal ................................................................ 13 Sostenuto Pedal ....................................................... 13 Specifications .......................................................... 32 T Tempo .................................................................... 14 Touch Sensitivity ...................................................... 15 Transpose ............................................................... 19 Troubleshooting ....................................................... 27 Tuning ............................................................... 15, 19 U USB TO HOST ........................................................... 8 User Song ............................................................... 24 V Voice ...................................................................... 16 Voice List ................................................................ 16 Volume .............................................................. 12, 14 YDP-162/142 Owner’s Manual 33 The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. El número de modelo, el número de serie, los requisitos de alimentación, etc. pueden encontrarse en la placa de identificación o cerca de ella. Esta placa se encuentra en la parte inferior de la unidad. Debe anotar dicho número en el espacio proporcionado a continuación y conservar este manual como comprobante permanente de su compra para facilitar la identificación en caso de robo. Nº de modelo Serial No. Nº de serie (bottom_en_01) (bottom_es_01) Le numéro de modèle, le numéro de série, l'alimentation requise, etc., se trouvent sur ou près de la plaque signalétique du produit, située dans la partie inférieure de l'unité. Notez le numéro de série dans l'espace fourni ci-dessous et conservez ce manuel en tant que preuve permanente de votre achat afin de faciliter l'identification du produit en cas de vol. N° de modèle N° de série (bottom_fr_01) Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu_en_01) Information concernant la Collecte et le Traitement des déchets d’équipements électriques et électroniques. Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels. Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC. En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un traitement inapproprié des déchets. Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits. [Pour les professionnels dans l'Union Européenne] Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d'informations. [Information sur le traitement dans d'autres pays en dehors de l'Union Européenne] Ce symbole est seulement valable dans l'Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée. (weee_eu_fr_01) Información para Usuarios sobre Recolección y Disposición de Equipamiento Viejo Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes. Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas 2002/96/EC. Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos. Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos. [Para usuarios de negocios en la Unión Europea] Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información. [Información sobre la Disposición en otros países fuera de la Unión Europea] Este símbolo sólo es válido en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición. (weee_eu_es_01) U.R.G., Digital Musical Instruments Division © 2012 Yamaha Corporation Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ 303APGR*.*-**B0 Printed in Indonesia ZE28920
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Yamaha YDP-162/142 El manual del propietario

Categoría
Pianos digitales
Tipo
El manual del propietario
Este manual también es adecuado para