Yamaha 01V96 El manual del propietario
- Categoría
- Instrumentos musicales
- Tipo
- El manual del propietario
Este manual también es adecuado para
Studio Manager
for
Owner’s Manual
E
2
Studio Manager for 01V96—Owner’s Manual
Important Information
Special Notices
•The software and this owner’s manual are the exclusive copyrights of Yamaha Corporation.
•Copying of the software or reproduction of this manual in whole or in part by any means is
expressly forbidden without the written consent of the manufacturer.
•Yamaha makes no representations or warranties with regard to the use of the software and
documentation and cannot be held responsible for the results of the use of this manual and
the software.
•This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so
may result in irreparable damage to your audio CD player.
•Copying of the commercially available music sequence data and/or digital audio files is
strictly prohibited except for your personal use.
•The screen displays as illustrated in this owner’s manual are for instructional purposes, and
may appear somewhat different from the screens which appear on your computer.
•Future upgrades of application and system software and any changes in specifications and
functions will be announced separately.
Trademarks
Adobe, Acrobat, and Reader are registered trademarks of Adobe Systems Incorporated.
Apple, AppleTalk, and Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation. OMS is a reg-
istered trademark of Opcode Systems, Inc. PowerPC is a registered trademark of Interna-
tional Business Machines Corporation. All other trademarks are the property of their
respective holders and are hereby acknowledged.
Copyright
No part of the Studio Manager software or its documentation may be reproduced or dis-
tributed in any form or by any means without the prior written authorization of Yamaha
Corporation.
© 2003 Yamaha Corporation. All rights reserved.
Yamaha Web Site
Information about Studio Manager, related products, and other Yamaha professional audio
equipment is available on the Yamaha Professional Audio Web site at:
http://www.yamahaproaudio.com/
Specifications and external appearance subject to change without notice.
3
Studio Manager for 01V96—Owner’s Manual
Contents
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Starting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quitting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifying the MIDI Port (Windows only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Configuring Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Synchronizing Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Working with Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Console Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Stero Input Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Master Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Remote Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Selected Channel Window . . . . . . . . . . . . . . . . . . 15
Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Stereo Input Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Bus Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Aux Sends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Stereo Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Remote Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4 Library Window . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5 Patch Editor Window . . . . . . . . . . . . . . . . . . . . . . 25
INPUT PATCH Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
OUTPUT PATCH Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
INSERT PATCH Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EFFECT PATCH Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
DIRECT OUT Patch Page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
6 Surround Editor Window . . . . . . . . . . . . . . . . . . . 30
7 Effect Editor Window . . . . . . . . . . . . . . . . . . . . . . 31
8 Keyboard Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . 32
File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Windows Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
4
Chapter 1—Getting Started
Studio Manager for 01V96—Owner’s Manual
1 Getting Started
Starting Studio Manager
Windows:
Click the Start button and then click Programs–>YAMAHA OPT
To ols–>YAMAHA Studio Manager for 01V96–>Studio Manager for 01V96.
Macintosh:
Open the Studio Manager for 01V96 folder and double-click “SM_01V96.”
If a 01V96 is detected while Studio Manager starts up, the Synchronization dialog box
appears, from which you can choose to transfer the settings of the 01V96 to Studio Manager
or vice versa. See “Synchronizing Studio Manager” on page 6 for more information. If no
01V96 is detected, a new Console window opens.
The ONLINE indicator is displayed while Studio Manager is connected to a
01V96. When no 01V96 is detected, the OFFLINE indicator is displayed.
Quitting Studio Manager
Choose Exit (Quit on the Macintosh) from the File menu.
If there are no unsaved changes, all windows close and Studio Manager quits. If there are
unsaved changes, a message asking whether or not you want to save the changes appears.
Click Yes to save the changes and quit, click No to quit, or click Cancel to cancel the opera-
tion. Studio Manager can also be quit by clicking the Console window’s Close button.
Specifying the MIDI Port (Windows only)
Before selecting a MIDI port in Studio Manager (page 5), you must specify which MIDI
port is connected to your 01V96.
1
Start Studio Manager.
2
Click the MIDI Setup button on the MIDI SETUP toolbar, as shown below.
The MIDI Setup dialog box appears.
3
Select the MIDI port to which your 01V96 is connected (e.g., MIDI In, Out,
or Thru).
Note: To use a MIDI port with Studio Manager, you must select it on the MIDI Setup dialog
box (as explained above) and on the System Setup dialog box, as explained on page 5.
Warning: Studio Manager does not yet support OPT (Open Plug-in Technology), so even if
it appears in the menu of an OPT compatible program, do not start it in this way.
MIDI Setup
Configuring Studio Manager
5
Studio Manager for 01V96—Owner’s Manual
Configuring Studio Manager
Selecting Ports
In order to use Studio Manager, you must specify the input and output ports that Studio
Manager should use to communicate with the 01V96.
Windows:
Choose System Setup from the File menu, and specify the input and output ports
on the Setup dialog box, as shown below.
Macintosh:
Choose Select OMS Ports from the File menu, and specify the input and output
ports (device names set in OMS Studio Setup) on the Setup dialog box, as shown below.
OMS Studio Setup can be opened directly from Studio Manager by selecting OMS Studio
Setup from the File menu.
System Setup
To open the Setup window, choose System Setup from the File menu.
This is the Windows Setup window.
Note: Choose OMS MIDI Setup from the File menu, and make sure that the “Run MIDI in
Background” option is on.
6
Chapter 1—Getting Started
Studio Manager for 01V96—Owner’s Manual
This is the Macintosh Setup window
Input Port/Output Port:
(Windows only) These pop-up menus are used to select the
ports with which Studio Manager communicates with the 01V96.
Console Device ID:
Studio Manager can control any one of up to eight 01V96s, each
with its own exclusive ID. Select the ID of the 01V96 that you want to control.
Channel Select:
These options determine whether or not channel selection is linked.
When the PC–>Console option is on, selecting a channel on Studio Manager selects the
same channel on the 01V96. When the Console–>PC option is on, selecting a channel on
the 01V96 selects the same channel on Studio Manager.
Confirmation:
These options determine whether or not a confirmation dialog box
appears when storing, recalling, or patching.
Layer Select:
These options determine whether or not Layer selection is linked. When the
PC–>Console option is on, selecting a Layer on Studio Manager selects the same Layer on
the 01V96. When the Console–>PC option is on, selecting a Layer on the 01V96 selects the
same Layer on Studio Manager.
Synchronizing Studio Manager
If a 01V96 is detected while Studio Manager starts up, or while Studio Manager is up and
running, the Synchronization dialog box shown below appears.
All Lib:
This option determines whether or not Scene and Library data is synchronized.
Console–>PC:
Click this button to transfer the settings of the 01V96 to the current Studio
Manager Session.
PC–>Console:
Click this button to transfer the settings of current Studio Manager Ses-
sion to the 01V96.
Cancel:
Click this button to leave the 01V96 and current Studio Manager Session unsyn-
chronized.
You can resynchronize the system at any time by choosing Re-synchronize from the Syn-
chronization menu.
Note: Do not operate the 01V96 while synchronization is in progress.
Working with Sessions
7
Studio Manager for 01V96—Owner’s Manual
Working with Sessions
A Studio Manager Session consists of all 01V96 mix settings, including Scene and library
data.
•To create a new Session, choose New Session from the File menu.
•To open a previously saved Session, choose Open Session from the File menu.
•To save the current Session, choose Save Session from the File menu.
•To save the current Session with a new name, choose Save Session as from the File menu.
Only one Session can be open at a time, so when you create a new Session, or open a previ-
ously saved Session, the message “This operation will purge current session” appears. If
there are no unsaved changes, or you do not want to save, click OK. If Studio Manager is
offline, the Session is loaded. If Studio Manager is online, the Session is loaded and the syn-
chronization dialog box appears.
Note: In order to save the settings of an optional Y56K card, in a Session, you must resynchro-
nize Studio Manager beforehand (Console–>PC).
Note: In order to protect the communication port used by Studio Manager, 01V96 communi-
cation settings (e.g., MIDI, Remote Layer, Machine Control) are not affected by PC–>Console
synchronization operations.
8
Chapter 2—Console Window
Studio Manager for 01V96—Owner’s Manual
2 Console Window
Studio Manager’s Console window displays 20 channel strips and a master section. When
an Input Channel Layer is selected, 16 Input Channels and four Stereo Input channels are
displayed. When the Master Layer is selected, the Bus Out, Aux Send and four Stereo Input
channels channels are displayed. And when the Remote layer is selected, 16 Remote Chan-
nels and four Stereo Input channels are displayed.
Many functions can be operated from here by clicking and dragging the various controls
and parameters. This is explained in the following sections.
Channels can be viewed in more detail on the Selected Channel window. See page 15 for
more information.
Input Channels
9
Studio Manager for 01V96—Owner’s Manual
Input Channels
A
SOURCE parameter
This parameter is used to select an Input source. To select an
Input source, click the parameter and choose from the list that
appears.
B
Routing buttons
These buttons are used to route the Input Channel to the Bus
Outs.
C
STEREO button
This button is used to route the Input Channel’s signal to the
Stereo Out.
D
DIRECT button
This button turns on and off the Input Channel’s routing to its
Direct Out.
E
Direct Out parameter
This parameter is used to select the Direct Out destination. To
select a destination, click the parameter and choose from the list
that appears.
F
PHASE button
This button is used to reverse the signal phase of the channel.
G
INSERT button
This button is used to turn on and off the Input Channel’s
Insert.
H
GATE button
This button is used to turn on and off the Input Channel’s Gate.
I
Gate open/close indicators
These indicators display whether the Gate is open (green) or
closed (red).
J
Gate threshold
This displays the Gate Threshold, which can be set by dragging.
K
COMP button
This button is used to turn on and off the Input Channel’s Com-
pressor.
L
Compressor curve
This display shows the Compressor’s curve.
M
EQ button
This button is used to turn on and off the Input Channel’s EQ.
N
EQ curve
This display shows the Equalizer’s curve, which can be set by
dragging.
O
DELAY button
This button is used to turn on and off the Input Channel’s Delay
function.
B
C
D
6
7
9
K
J
L
M
N
O
P
Q
R
W
X
Y
Z
8
5
a
1
T
V
U
S
10
Chapter 2—Console Window
Studio Manager for 01V96—Owner’s Manual
P
Delay parameter
This parameter is used to set the delay time of the Delay function. Delay times can be set by
dragging.
Q
Channel number
This is the channel number.
R
AUX section
These controls are used to set the levels of the Aux Sends. To set an Aux Send level,
drag its bar or click a point along the length of the bar. To turn an Aux Send on or
off, click its number.
The following table shows how the Aux Send controls appear depending on the
Aux Send On/Off and Pre/Post settings. Aux Sends can be set to pre-fader or
post-fader on the Selected Channel window (see “AUX SEND section” on
page 16).
S
Pan/Aux Send display
This display shows the stereo or surround pan position or, while setting an Aux Send, the
Aux Send level in dB.
T
PAN control
This control is used to set the Input Channel’s stereo or surround pan position. When the
PAN CONTROL in the Master Section is set to “STEREO,” the Pan control appears as a
rotary control, and when set to “SURR,” the control appears as dot on a pan graph. The sur-
round pan position can be set by dragging the dot. If you click on the pan graph while hold-
ing down the Shift key, the pan immediately jumps to the new position.
U
LFE control
When 5.1 or 6.1 Surround mode is selected, this control is used to set the sur-
round LFE Channel level. It appears when the PAN CONTROL in the Master
Section is set to “SURR.” To set the LFE level, drag the end of its bar or click a
point along the length of the bar.
V SELECT button
This button is used to select the Input Channel.
W SOLO button
This button solos the Input Channel. It appears orange while the channel is soloed.
X ON button
This button turns the Input Channel on and off. It appears orange while the channel is on.
Y Short channel name
This is the channel’s short name. To edit the name, click it and type.
Z Channel fader
This is the Input Channel’s fader.
a Channel meter
This meter displays the signal level of the Input Channel.
Aux Send status Appearance
On or off but no level set Dark blue bar
Off, pre-fader Green bar outline displays level
On, pre-fader Green bar displays level
Off, post-fader Orange bar outline displays level
On, post-fader Orange bar displays level
Stero Input Channel 11
Studio Manager for 01V96—Owner’s Manual
Stero Input Channel
A SOURCE parameter
This parameter is used to select an Input source. To select an Input
source, click the parameter and choose from the list that appears.
B Routing buttons
These buttons are used to route the Input Channel to the Bus
Outs.
C STEREO button
This button is used to route the Input Channel’s signal to the
Stereo Out.
D PHASE button
This button is used to reverse the signal phase of the channel.
E EQ button
This button is used to turn on and off the Input Channel’s EQ.
F EQ curve
This display shows the Equalizer’s curve, which can be
set by dragging.
G Channel number
This is the channel number.
H AUX section
These controls are used to set the levels of the Aux Sends. To set
an Aux Send level, drag its bar or click a point along the length
of the bar. To turn an Aux Send on or off, click its number.
I Pan/Aux Send display
This display shows the stereo or surround pan position or, while
setting an Aux Send, the Aux Send level in dB.
J PAN control
This control is used to set the Input Channel’s stereo or sur-
round pan position. When the PAN CONTROL in the Master
Section is set to “STEREO,” the Pan control appears as a rotary
control, and when set to “SURR,” the control appears as dot on
a pan graph. The surround pan position can be set by dragging
the dot. If you click on the pan graph while holding down the
Shift key, the pan immediately jumps to the new position.
K LFE control
When 5.1 or 6.1 Surround mode is selected, this con-
trol is used to set the surround LFE Channel level. It
appears when the PAN CONTROL in the Master Sec-
tion is set to “SURR.” To set the LFE level, drag the end of its bar
or click a point along the length of the bar.
L SELECT button
This button is used to select either channel R or L to operate by
the PAN control (
J).
M SOLO button
This button solos the Input Channel. It appears orange while the
channel is soloed.
N ON button
This button turns the Input Channel on and off. It appears orange
while the channel is on.
B
C
4
5
6
7
8
M
N
O
P
Q
1
J
L
K
9
12 Chapter 2—Console Window
Studio Manager for 01V96—Owner’s Manual
O Short channel name
This is the channel’s short name. To edit the name, click it and type.
P Channel fader
This is the Input Channel’s fader.
Q Channel meter
This meter displays the signal level of the channel L or R.
Master Section
A ONLINE/OFFLINE status indicator
This indicator shows whether Studio Manager is online or
offline.
B Meters
These meters display the output level of the Stereo Out when
PAN CONTROL is set to “STEREO,” or the Bus Outs used for
surround processing when PAN CONTROL is set to “SURR.”
The Meters in 3-1, 5.1 and 6.1 Surround modes are shown
below.
C LAYER buttons
These buttons are used to select the Layers.
D PAN CONTROL
These buttons are used to select either “STEREO” (Stereo mode)
or “SURR” (Surround mode). The Pan control on the Input
Channels is a rotary control when “STEREO” is selected, and a
dot on a pan graph when “SURR” is selected.
E SELECT button
This button is used to select the Stereo Out. If it’s clicked while
the Remote Layer is selected, it will light up, but the Stereo Out
will not appear in the Selected Channel window.
F ON button
This button turns the Stereo Out on and off. It appears orange
while the Stereo Out is on.
G Channel fader
This is the Stereo Out fader.
1
2
3
5
6
7
4
3-1 5.1 6.1
Output Channels 13
Studio Manager for 01V96—Owner’s Manual
Output Channels
When the Master Layer is selected, the Bus Out and Aux Send channels are displayed. A Bus
Out channel is shown here. Aux Send channels appear the same except that they do not have
a STEREO button.
A STEREO button (Bus Out only)
This button is used to route the Bus Out to the Stereo Out.
B INSERT button
This button is used to turn on and off the Bus Out’s Insert.
C COMP button
This button is used to turn on and off the Bus Out’s Compressor.
D Compressor curve
This display shows the Compressor’s curve.
E EQ button
This button is used to turn on and off the Bus Out’s EQ.
F EQ curve
This display shows the Equalizer’s curve, which can be set by
dragging.
G DELAY button
This button is used to turn on and off the Bus Out’s Delay func-
tion.
H Delay parameter
This parameter is used to set the delay time of the Delay func-
tion. Delay times can be set by dragging.
I Channel number
This is the channel number.
J SELECT button
This button is used to select the Bus Out.
K SOLO button
This button solos the Bus Out. It appears orange while the Bus
Out is soloed.
L ON button
This button turns the Bus Out on and off. It appears orange
while the Bus Out is on.
M Short channel name
This is the channel’s short name. To edit the name, click it and
type.
N Channel fader
This is the Bus Out’s fader.
O Channel meter
This meter displays the signal level of the Bus Out.
6
C
N
L
J
O
M
K
I
8
7
5
D
1
2
14 Chapter 2—Console Window
Studio Manager for 01V96—Owner’s Manual
Remote Channels
When the Remote Layer is selected, Remote Channels are displayed.
A Channel number
This is the channel number.
B SELECT button
This button is used to select the Remote Channel.
C ON button
This button turns the Remote Channel on and off. It appears
orange while the channel is on.
D Short channel name
This is the Remote Channel’s short name. To edit the name, click
it and type.
E Channel fader
This is the Remote Channel’s fader.
Note: When the remote target setting on the 01V96 is set to User
Defined, you can use the ON buttons and channel faders to con-
trol the functions specified on the Remote page. When the remote
target is set to anything other than User Defined, the ON buttons
and channel faders have no effect, and the name of the specified
target is displayed in the channel’s short name.
C
5
D
1
2
Selected Channel Window 15
Studio Manager for 01V96—Owner’s Manual
3 Selected Channel Window
The Selected Channel window allows detailed editing of the currently selected channel. To
open the Selected Channel window, choose Selected Channel from the Windows menu.
The layout of the Selected Channel window depends on the currently selected channel.
There are six variations, as follows:
•Input Channels (see below)
•Stereo Input Channels (see page 17)
•Bus Outs (see page 18)
•Aux Sends (see page 20)
•Stereo Out (see page 21)
•Remote Channels (see page 22)
Input Channels
This is the Selected Channel window for Input Channels.
A CHANNEL SELECT, INPUT PATCH & LIBRARY section
Channels can be selected by clicking the Channel ID and selecting from the list that appears,
or by clicking the left and right Channel Select buttons. The long channel name is displayed
below the Channel ID. To edit the name, click it and type. The INPUT PATCH parameter
is used to select an input source. To select an input, click the parameter and choose from the
list that appears. The LIBRARY button opens the Channel Library window.
879
231564
16 Chapter 3—Selected Channel Window
Studio Manager for 01V96—Owner’s Manual
B GATE section
This section contains the Gate controls and display graph for the currently selected Input
Channel. The rotary controls are used to set the threshold, range, attack, decay, and hold.
The GR meter indicates the amount of gain reduction being applied by the Gate. The ON
button turns the Gate on and off. The LINK button links the Gate of the currently selected
Input Channel with the Gate of its partner channel. The KEY IN parameter is used to select
a Gate trigger source. The LIBRARY button opens the Gate Library window.
C EQUALIZER section
This section contains the EQ controls and display graph for the currently selected Input
Channel. The rotary controls are used to set the gain, center frequency, and Q of each band,
and the pre-EQ attenuation level. EQ can also be set by dragging the EQ curve on the
EQUALIZER graph. The ON button turns the EQ on and off. The TYPE buttons select the
EQ type. The LIBRARY button opens the EQ Library window.
D DELAY & PHASE section
This section contains the delay and phase controls for the currently selected Input Channel.
The rotary controls are used to set the delay time, feedback gain, and feedback mix. The ON
button turns the Delay on and off. The PHASE button reverses the channel’s signal phase.
E ROUTING, PAN & level section
This section contains the routing, pan, and level controls and the SOLO, and ON buttons
for the currently selected Input Channel. ROUTING buttons 1–8 are used to route the
channel to the Bus Outs. The STEREO button routes the channel to the Stereo Out. The
DIRECT button routes the channel to its Direct Out, and the Direct Out parameter below
it selects a Direct Out destination. The F.PAN button turns on and off the Bus Out Follow
Pan function. The PAN control is used to pan the channel. The SOLO button is used to solo
the channel, the ON button, to turn on and off the channel, and the channel fader, to set the
channel level.
F AUX SEND section
This section contains the Aux Send controls for the currently selected Input Channel. Use
the rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and off.
Use the button below each Aux Send control to select pre-fader or post-fader. In Fixed
mode, this button is used to turn Aux Sends on and off (the level is fixed at nominal).
When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered
Aux Send control sets the level, while the even-numbered control works as a pan control.
G COMPRESSOR section
This section contains the Compressor controls and display graph for the currently selected
Input Channel. The rotary controls are used to set the threshold, ratio, attack, release, gain,
and knee. The GR meter indicates the amount of gain reduction being applied by the Com-
pressor. The OUT meter indicates its output level. The ON button turns the Compressor
on and off. The LINK button links the Compressor of the currently selected Input Channel
with the Compressor of its partner channel. The POSITION parameter is used to specify
the position of the Compressor in the signal path. The ORDER parameter is used to specify
the order of the Compressor and Insert when both are inserted at the same position. The
LIBRARY button opens the Compressor Library window.
H INSERT section
This section contains the Insert parameters for the currently selected Input Channel. The
INSERT button turns the Insert on and off. The OUT and IN parameters are used to specify
the insert out destination and insert in source respectively. The POSITION parameter is
used to specify the position of the Insert in the signal path.
Stereo Input Channels 17
Studio Manager for 01V96—Owner’s Manual
I PAIR, FADER GROUP & MUTE GROUP section
This section contains the Pair, Fader and Mute group functions for the currently
selected Input Channel. Click the heart icon to pair and unpair the channel with its
partner channel. Use the FADER GROUP buttons to add the channel to Fader
groups, and use the MUTE GROUP buttons to add it to Mute groups.
Stereo Input Channels
This is the Selected Channel window for Input Channels.
A CHANNEL SELECT, INPUT PATCH & LIBRARY section
Channels can be selected by clicking the Channel ID and selecting from the list that appears,
or by clicking the left and right Channel Select buttons. The long channel name is displayed
below the Channel ID. To edit the name, click it and type. The INPUT PATCH parameter
is used to select an input source. To select an input, click the parameter and choose from the
list that appears. The LIBRARY button opens the Channel Library window.
B PHASE section
This section contains the phase control for the currently selected Stereo Input Channel. The
PHASE button reverses the channel’s signal phase.
C EQUALIZER section
This section contains the EQ controls and display graph for the currently selected Stereo
Input Channel. The rotary controls are used to set the gain, center frequency, and Q of each
band, and the pre-EQ attenuation level. EQ can also be set by dragging the EQ curve on the
EQUALIZER graph. The ON button turns the EQ on and off. The TYPE buttons select the
EQ type. The LIBRARY button opens the EQ Library window.
6
2
3
145
18 Chapter 3—Selected Channel Window
Studio Manager for 01V96—Owner’s Manual
D Routing, pan & level section
This section contains the routing, pan, and level controls and the, SOLO, and ON buttons
for the currently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route
the channel to the Bus Outs. The STEREO button routes the channel to the Stereo Out. The
DIRECT button routes the channel to its Direct Out, and the Direct Out parameter below
it selects a Direct Out destination. The F.PAN button turns on and off the Bus Out Follow
Pan function. The PAN control is used to pan the channel. The SOLO button is used to solo
the channel, the ON button, to turn on and off the channel, and the channel fader, to set the
channel level.
E AUX SEND section
This section contains the Aux Send controls for the currently selected Stereo Input Channel.
Use the rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and
off. Use the button below each Aux Send control to select pre-fader or post-fader. In Fixed
mode, this button is used to turn Aux Sends on and off (the level is fixed at nominal).
When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered
Aux Send control sets the level, while the even-numbered control works as a pan control.
F FADER GROUP & MUTE GROUP section
This section contains the Fader and Mute group functions for the currently selected Stereo
Input Channel. Use the FADER GROUP buttons to add the channel to Fader groups, and
use the MUTE GROUP buttons to add it to Mute groups.
Bus Outs
This is the Selected Channel window for Bus Outs.
2
34
1
765
Bus Outs 19
Studio Manager for 01V96—Owner’s Manual
A CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and selecting from the list that appears,
or by clicking the left and right Channel Select buttons. The long channel name is displayed
below the Channel ID. The LIBRARY button opens the Channel Library window.
B EQUALIZER section
This section contains the EQ controls and display graph for the currently selected Bus Out.
It’s layout is identical to the EQUALIZER section for Input Channels. See “EQUALIZER
section” on page 16 for more information.
C DELAY section
This section contains the delay controls for the currently selected Bus Out. The rotary con-
trol is used to set the delay time, and the ON button turns the Delay function on and off.
D TO STEREO & level section
This section contains the TO STEREO and level controls and the SOLO, and ON buttons
for the currently selected Bus Out. The TO STEREO button routes the Bus Out to the Stereo
Out, and the rotary controls are used to set the Bus to Stereo level and pan. The SOLO but-
ton is used to solo the Bus Out, the ON button, to turn the Bus Out on and off, and the
channel fader, to set the Bus Out level.
E COMPRESSOR section
This section contains the Compressor controls and display graph for the currently selected
Bus Out. Its layout is identical to the COMPRESSOR section for Input Channels. See
“COMPRESSOR section” on page 16 for more information.
F INSERT section
This section contains the Insert parameters for the currently selected Bus Out. The INSERT
button turns the Insert on and off. The OUT and IN parameters are used to select the insert
out destination and insert in source respectively. The POSITION parameter is used to spec-
ify the position of the Insert in the signal path.
G PAIR, FADER GROUP & MUTE GROUP section
This section contains the Pair, Fader and Mute group functions for the currently selected
Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. Use
the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE
GROUP buttons to add it to Mute groups.
20 Chapter 3—Selected Channel Window
Studio Manager for 01V96—Owner’s Manual
Aux Sends
This is the Selected Channel window for Aux Sends.
A CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and choosing from the list that
appears, or by clicking the left and right Channel Select buttons. The long channel name is
displayed below the Channel ID. The LIBRARY button opens the Channel Library window.
B EQUALIZER section
This section contains the EQ controls and display graph for the currently selected Aux Send.
It’s layout is identical to the EQUALIZER section for Input Channels. See “EQUALIZER
section” on page 16 for more information.
C DELAY section
This section contains the delay controls for the currently selected Aux Send. The rotary con-
trol is used to set the delay time, and the ON button turns the Delay function on and off.
D Aux Send level section
This section contains the SOLO, and ON buttons and the channel fader for the currently
selected Aux Send.
E COMPRESSOR section
This section contains the Compressor controls and display graph for the currently selected
Aux Send. Its layout is identical to the COMPRESSOR section for Input Channels. See
“COMPRESSOR section” on page 16 for more information.
2
3
7
1
5
6
4
Stereo Out 21
Studio Manager for 01V96—Owner’s Manual
F INSERT section
This section contains the Insert parameters for the currently selected Aux Send. The
INSERT button turns the Insert on and off. The OUT and IN parameters are used to specify
the insert out destination and insert in source respectively. The POSITION parameter is
used to specify the position of the Insert in the signal path.
G PAIR, FADER GROUP & MUTE GROUP section
This section contains the Pair, Fader and Mute group functions for the currently selected
Aux Send. Click the heart icon to pair and unpair the channel with its partner channel. Use
the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE
GROUP buttons to add it to Mute groups.
Stereo Out
This is the Selected Channel window for the Stereo Out.
A CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and choosing from the list that
appears, or by clicking the left and right Channel Select buttons. The long channel name is
displayed below the Channel ID. The LIBRARY button opens the Channel Library window.
B EQUALIZER section
This section contains the EQ controls and display graph for the Stereo Out. It’s layout is
identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on
page 16 for more information.
23
7
1
5
6
4
22 Chapter 3—Selected Channel Window
Studio Manager for 01V96—Owner’s Manual
C DELAY section
This section contains the delay controls for the Stereo Out. The rotary control is used to set
the delay time, and the ON button turns the Delay function on and off.
D Balance & level section
This section contains the balance control and ON buttons, and channel fader for the Stereo
Out.
E COMPRESSOR section
This section contains the Compressor controls and display graph for the currently selected
Stereo Out. Its layout is identical to the COMPRESSOR section for Input Channels except
there is no LINK button. See “COMPRESSOR section” on page 16 for more information.
F INSERT section
This section contains the Insert parameters for the Stereo Out. The INSERT button turns
the Insert on and off. The OUT and IN parameters are used to specify the insert out desti-
nation and insert in source respectively. The POSITION parameter is used to specify the
position of the Insert in the signal path.
G FADER GROUP & MUTE GROUP section
This section contains the Fader and Mute group functions for the Stereo Out. Use the
FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE
GROUP buttons to add it to Mute groups.
Remote Channels
This is the Selected Channel window for the
Remote Channels.
A CHANNEL SELECT section
Channels can be selected by clicking the
Channel ID and choosing from the list that
appears, or by clicking the left and right
Channel Select buttons. The long channel
name is displayed below the Channel ID.
B Remote Channel Level section
This section contains the ON button and the
channel fader for the currently selected
Remote Channel.
Note: When the remote target setting on the
01V96 is set to anything other than User
Defined, the ON buttons and channel faders
have no effect, and the name of the specified
target is displayed below the channel ID.
1
2
Library Window 23
Studio Manager for 01V96—Owner’s Manual
4 Library Window
The Library window allows you to control and manage 01V96 Scenes and libraries. In addi-
tion, Scenes and libraries can be saved to disk on your computer.
The Library window provides access to the following libraries:
The layout of the Library window is the same regardless of which library is selected (the
Scene Library is shown below). The Library window consists of two panes. The pane on the
left displays a list of memories in the currently open Library file. The pane on the right dis-
plays a list of memories in the 01V96.
Memories can be copied between the 01V96 and Library file by dragging them between the
panes. Memories can be copied or sorted within the 01V96 or Library file by dragging them
within the same pane. When a memory is dropped on top of another memory, it’s copied.
When a memory is dropped between two memories, it’s moved (i.e., sorted). Memory con-
tents can be swapped by holding down the Shift key while dragging. In all cases, the contents
of the destination memory are overwritten. To edit a memory title, click and then type.
A File name
This is the file name of the currently open Library file.
B OPEN button
This button is used to open Library files.
C CLOSE button
This button is used to close the currently open Library file.
Library How to Open
Scene Choose Library from the Windows menu
Channel
LIBRARY buttons on the Selected Channel window
Equalizer
Gate
Compressor
Effects LIBRARY button on the Effects Editor window
Input Patch
LIBRARY buttons on the Patch Editor window
Output Patch
L
12 3 4 5
K
J
PONM6789
24 Chapter 4—Library Window
Studio Manager for 01V96—Owner’s Manual
D SAVE button
This button is used to save the currently open Library file.
E SAVE AS button
This button is used to save the currently open Library file with a different name.
F TITLE pane
This pane displays the memory list.
G PROTECT pane
This pane displays a padlock icon for protected memories.
H INPUT PATCH LINK pane
This pane displays the number of the linked input patch memory.
I OUTPUT PATCH LINK pane
This pane displays the number of the linked output patch memory.
J STORE button
This button is used to store to the selected memory.
K RECALL button
This button is used to recall the selected memory.
L FILE pane
This pane displays the memories in the currently open Library file.
M 01V96 INTERNAL DATA pane
This pane displays the 01V96 memories in the currently selected Library.
N CLEAR button
This button clears the contents of the selected memory.
O UNDO button
This button undoes the last recall, store, copy, clear, swap, or titling operation.
P PROTECT button
This button is used to protect or unprotect the selected memory.
Patch Editor Window 25
Studio Manager for 01V96—Owner’s Manual
5 Patch Editor Window
The Patch Editor window is used to patch Inputs, Outputs, Inserts, Effects, and Direct Outs.
It consists of five pages, which are selected by clicking the tabs along the top of the window.
To open the Patch Editor window, choose Patch Editor from the Windows menu.
INPUT PATCH Page
A Channel IDs
These are the Channel IDs.
B Long channel names
These are the Channel long names. To edit a name, click it and type.
C AUTO SETUP button
Clicking this button sets the patches on this page to their initial values.
D ALL CLEAR button
This button clears all patches on this page.
E LIBRARY button
This button opens the Input Patch Library window.
F Patchbay
The patchbay is used to patch input ports to Input Channels. Active patches are indicated
by a blue dot. To make a patch, click a square. To unpatch, click a blue dot.
4
5
6
3
2
1
26 Chapter 5—Patch Editor Window
Studio Manager for 01V96—Owner’s Manual
OUTPUT PATCH Page
A Channel IDs
These are the Channel IDs.
B Long channel names
These are the Channel long names. To edit a name, click it and type.
C AUTO SETUP button
Clicking this button sets the patches on this page to their initial values.
D ALL CLEAR button
This button clears all patches on this page.
E LIBRARY button
This button opens the Output Patch Library window.
F Patchbay
The patchbay is used to patch output ports to Output Channels. Active patches are indi-
cated by a red dot. To make a patch, click a square. To unpatch, click a red dot.
6
3
4
5
2
1
INSERT PATCH Page 27
Studio Manager for 01V96—Owner’s Manual
INSERT PATCH Page
A Channel IDs
These are the Channel IDs.
B Long channel names
These are the Channel long names. To edit a name, click it and type.
C LIBRARY buttons
These buttons open the Input and Output Patch Library windows.
D Insert Out Patchbay
This patchbay is used to patch output ports to the Insert Outs of Input Channels, Bus Outs,
Aux Sends, and the Stereo Out. Active patches are indicated by a red dot. To make a patch,
click a square. To unpatch, click a red dot.
E Insert In Patchbay
This patchbay is used to patch input ports to the Insert Ins of Input Channels, Bus Outs,
Aux Sends, and the Stereo Out. Active patches are indicated by a blue dot. To make a patch,
click a square. To unpatch, click a blue dot.
4
5
12
3
28 Chapter 5—Patch Editor Window
Studio Manager for 01V96—Owner’s Manual
EFFECT PATCH Page
A Effects processor #1—#4 inputs
These parameters are used to select input sources for internal effects processors #1—#4.
B LIBRARY button
This button opens the Input Patch Library window.
2
1
DIRECT OUT Patch Page 29
Studio Manager for 01V96—Owner’s Manual
DIRECT OUT Patch Page
A Channel IDs
These are the Channel IDs.
B Long channel names
These are the Channel long names. To edit a name, click it and type.
C LIBRARY button
This button opens the Output Patch Library window.
D Patchbay
The patchbay is used to patch output ports to the Direct Outs. Active patches are indicated
by a red dot. To make a patch, click a square. To unpatch, click a red dot.
1
4
2
3
30 Chapter 6—Surround Editor Window
Studio Manager for 01V96—Owner’s Manual
6 Surround Editor Window
The Surround Editor window allows you to edit the surround pan position of the currently
selected Input Channel. To open the Surround Editor window, choose Surround Editor
from the Windows menu.
A CHANNEL SELECT section
Channels can be selected by clicking the Channel ID and selecting from the list that appears,
or by clicking the left and right Channel Select buttons. The long channel name is displayed
below the Channel ID. To edit the name, click it and type.
B Surround pan graph
The green dot on this graph indicates the surround pan position for the currently selected
Input Channel. The surround pan can be set by dragging the dot.
C SURROUND MODE indicator
This indicates the currently selected Surround mode: STEREO, 3-1, 5.1 or 6.1.
D Surround pan position
This is the current surround pan position.
E LFE control
This rotary control sets the level of the LFE channel.
F DIV.F control (6.1)/DIV control (3-1, 5.1)
This rotary control sets the amount of divergence (i.e., how the Center signal is fed to the
Left, Right, and Center channels). With 6.1 surround, you can set the divergence for both
the front and rear. The DIV.F control sets the amount of divergence for the front signal.
G DIV.R control (6.1 only)
This rotary control sets the amount of divergence for the rear signal.
H LINK button (6.1 only)
This button is used to link the DIV.F and DIV.R controls.
4 8
6
2
3
5
7
1
Effect Editor Window 31
Studio Manager for 01V96—Owner’s Manual
7 Effect Editor Window
The Effect Editor window allows you to edit the internal effects processors. To open the
Effect Editor window, choose Effect Editor from the Windows menu.
A Effects processor select
These buttons are used to select the internal effects processors.
B Effect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the
effect recalled to the currently selected effects processor. To edit the EFFECT NAME, click
it and type. The LIBRARY button opens the Effects Library window.
C Meters
These are output meters for the currently selected effects processor.
D IN button
This button is used to set the metering position to the effects processor’s inputs.
E OUT button
This button is used to set the metering position to the effects processor’s outputs.
F Effect parameter section
This section contains the various effects controls, buttons, and displays. Its layout depends
on the selected effect type.
G MIX BALANCE control
This control is used to adjust the balance between the wet and dry signals. When set to 0,
only the dry signal is heard. When set to 100, only the wet signal is heard.
H BYPASS button
This button is used to bypass the currently selected effects processor.
21
7
3
4 5
6
8
32 Chapter 8—Keyboard Shortcuts
Studio Manager for 01V96—Owner’s Manual
8 Keyboard Shortcuts
File Menu
Windows Menu
Windows Macintosh Action
CTRL+N
-N
Creates a new Session
CTRL+O
-O
Opens a previously saved Session
CTRL+S
-S
Saves the current Session
Windows Macintosh Action
CTRL+W
-W
Closes the foremost window except the Console window
CTRL+ALT+W
-Option-W
Closes all windows except the Console window
CTRL+1
-1
Opens the Selected Channel window
CTRL+2
-2
Opens the Library window
CTRL+3
-3
Opens the Patch Editor window
CTRL+4
-4
Opens the Surround Editor window
CTRL+6
-6
Opens the Effect Editor window
33
Studio Manager for 01V96—Owner’s Manual
Index
Numerics
01V96 INTERNAL DATA pane 24
A
ALL CLEAR button 25, 26
All Lib, synchronization
6
AUTO SETUP button
25, 26
AUX section
10, 11
Aux Send masters
selected channel window
20
AUX SEND section
16, 18
B
BAL control 22
Bus Outs
console window
13
selected channel window
18
BYPASS button
31
C
Channel 10
Channel fader
10, 12, 13, 14, 16, 18, 19
Channel IDs
25, 26, 27, 29
Channel library
23
Channel meter
10, 12, 13
Channel number
10, 11, 13, 14
CHANNEL SELECT section
15, 17, 19, 20, 21, 22, 30
Channel Select, preference
6
CLEAR button
24
CLOSE button
23
COMP button
9, 13
Compressor curve
9, 13
Compressor library
23
COMPRESSOR section
16, 19, 20, 22
Configuring Studio Manager
5
Confirmation, preference
6
Console Device ID, preference
6
Console window
8
Console–>PC, channel select
6
Console–>PC, layer select
6
Console–>PC, synchronization
6
Creating new sessions
7
D
DELAY button 9, 13
Delay parameter
10, 13
DELAY section
16, 19, 20, 22
DIRECT button
9, 16, 18
Direct Out parameter
9, 16, 18
Direct out patch page
29
DIV.F control/DIV control
30
DIV.R control (6.1 only) 30
E
Effect editor window 31
EFFECT NAME
31
Effect parameter section
31
Effect patch page
28
EFFECT TYPE
31
Effects library
23
Effects processor #1—#4 inputs
28
EQ button
9, 11, 13
EQ curve
9, 11, 13, 16, 17
EQ library
23
EQUALIZER section
16, 17, 19, 20, 21
Exiting Studio Manager
4
F
F.PAN button 16, 18
FADER GROUP buttons
17, 18, 19, 21, 22
FADER GROUP section
17, 18, 19, 21, 22
File name
23
FILE pane
24
G
GATE button 9
Gate library
23
Gate open/close indicators
9
GATE section
16
Gate threshold
9
I
IN button 31
Input
6
Input Channels
console window
9, 11
selected channel window
15
Input Patch library
23
INPUT PATCH LINK pane
24
Input patch page
25
INPUT PATCH section
15, 17
Input port
5
Input/Output Port
6
INSERT button
9, 13, 16, 19, 21, 22
Insert In Patchbay
27
Insert Out Patchbay
27
Insert patch page
27
INSERT section
16, 19, 21, 22
34
Studio Manager for 01V96—Owner’s Manual
K
Keyboard shortcuts 32
L
Launching Studio Manager 4
LAYER buttons
12
Layer Select, preference 6
LFE control
10, 11, 30
LIBRARY button
15, 16, 17, 19, 20, 21, 25, 26, 27, 28,
29, 31
Library window
23
LINK button (6.1 only)
30
Long channel names
25, 26, 27, 29
M
Master section 12
Meters
12, 31
MIX BALANCE control
31
MUTE GROUP buttons
17, 18, 19, 21, 22
MUTE GROUP section
17, 18, 19, 21, 22
O
Offline indicator 4
OMS MIDI Setup
5
OMS Studio Setup
5
ON button
10, 11, 12, 13, 14, 16, 17, 18, 19, 20, 22
Online indicator
4
ONLINE/OFFLINE status indicator
12
OPEN button
23
Opening sessions
7
OUT button
31
Output channels
13
Output Patch library
23
OUTPUT PATCH LINK pane
24
Output patch page
26
Output port
5
P
Pair icon 17, 18, 19, 21
PAN CONTROL
12
PAN control
10, 11, 16, 18
Pan/Aux Send display
10, 11
Patch confirmation
6
Patch editor window
25
Patchbay
25, 26, 27, 29
Patching
25
PC–>Console, channel select
6
PC–>Console, layer select
6
PC–>Console, synchronization
6
PHASE button
9, 11, 16, 17
Ports, selecting
5
Pre/post buttons
16, 18
PROTECT button
24
Protect pane
24
Q
Quitting Studio Manager 4
R
RECALL button 24
Recall confirmation
6
Remote Channels
console window
14
selected channel window
22
Resynchronizing Studio Manager
6
ROUTING buttons
9, 11, 16, 18
Run MIDI in background
5
S
SAVE AS button 24
SAVE button
24
Saving sessions
7
Scene library
23
SELECT button
10, 11, 12, 13, 14
Setup window
5
Short channel name
10, 12, 14
Shortcuts, keyboard
32
SOLO button
10, 11, 13, 16, 18, 19
SOURCE parameter
9, 11
Specifying the MIDI Port
4
Starting Studio Manager
4
STEREO button
9, 11, 12, 13, 16, 18, 19
Stereo Input Channel
17
Stereo Out
console window
12
selected channel window
21
STORE button
24
Store confirmation
6
SURR button
12
Surround editor window
30
SURROUND MODE indicator
30
Surround pan graph
30
Surround pan position
30
Synchronizing Studio Manager
6
T
Title pane 24
TO STEREO section
19
TYPE I button
16, 17
TYPE II button
16, 17
U
UNDO button 24
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2003 Yamaha Corporation
IP01A0
Yamaha Manual Library
http://www2.yamaha.co.jp/manual/english/
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Yamaha 01V96 El manual del propietario
- Categoría
- Instrumentos musicales
- Tipo
- El manual del propietario
- Este manual también es adecuado para
En otros idiomas
- français: Yamaha 01V96 Le manuel du propriétaire
- italiano: Yamaha 01V96 Manuale del proprietario
- English: Yamaha 01V96 Owner's manual
- Deutsch: Yamaha 01V96 Bedienungsanleitung
- русский: Yamaha 01V96 Инструкция по применению
- Nederlands: Yamaha 01V96 de handleiding
- português: Yamaha 01V96 Manual do proprietário
- dansk: Yamaha 01V96 Brugervejledning
- polski: Yamaha 01V96 Instrukcja obsługi
- čeština: Yamaha 01V96 Návod k obsluze
- svenska: Yamaha 01V96 Bruksanvisning
- Türkçe: Yamaha 01V96 El kitabı
- suomi: Yamaha 01V96 Omistajan opas
- română: Yamaha 01V96 Manualul proprietarului
Documentos relacionados
-
Yamaha V96 El manual del propietario
-
-
-
-
-
Yamaha V1 El manual del propietario
-
-
-
-