Philips AX3218 El manual del propietario

Marca: Philips

Modelo: AX3218

Categoría: Reproductores de CD

Tipo: El manual del propietario

Este manual también es adecuado para

3140 115 2968.1 Printed in China

1 OPEN

HOLD➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

CLASS 1

LASER PRODUCT

English

Français

Español

English

CONTROLS / POWER SUPPLY

ONTROLS ( see ﬁgure

)

1 OPEN 2 ..............opens the CD lid

2 ∞ .......................skips and searches CD tracks backwards

3 § .......................skips and searches CD tracks forwards

4 2; ......................switches the player on, starts or pauses CD play

5 9.........................stops CD play, clears a program or switches the player off

6 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

7 ............................display

8 MODE.................selects the different playing possibilities: shufﬂe,

shufﬂe repeat all, repeat, repeat all and SCAN

9 PROGRAM..........programs tracks and reviews the program

0 RESUME.............stores the last position of a CD track played

HOLD...................locks all buttons

OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone jack and LINE OUT jack to connect the

player to another audio input of an additional appliance,

remote control (not on all versions)

@ VOL E ............adjusts the volume

# 4.5V DC...............jack for external power supply

$ ............................belt clip holder

% ............................type plate

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1 Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the

player and to the wall outlet.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, dead batteries and old equipment.

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

adapter. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2 Plug the voltage converter into the

cigarette lighter jack (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input jack on the

set.

3 If necessary, clean the cigarette lighter jack to obtain a good electrical con-

tact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter jack-

when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal

lead to this LINE IN jack and to LINE OUT/p on the set.

CD PLAY / FEATURES

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CDhas not been

ﬁnalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

y is shown if the bass enhancement is

activated.

Remote control (supplied or optionally available)

Use the AY 3768 cord remote control.The buttons on the remote

control have the same functions as the corresponding buttons on the set.

1 Press 9 twice to switch off the set.

2 Firmly connect the remote control to LINE OUT/p on the set.

3 Adjust the volume VOL E on the CD player and remote control.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program.

A single track may be stored more than once in the

program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

yprogram lights up; the track number

programmed and P with the total number of

stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

yprogram is shown and playback starts.

• You can review the program by pressing PROGRAM

for more than 2 seconds.

yThe display shows all the stored tracks in

sequence.

Notes: – If you press PROGRAM and there is no track selected, SEL is

displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

yCLR is displayed once, program goes off,

and the program is cleared.

Note: The program will also be cleared if the power

supply is interrupted, or if the CD-player lid is

opened, or if the set switches off automatically.

FEATURES / TROUBLESHOOTING

RESUME and HOLD

You can interrupt playback and continue (even after an

extended period of time) from the position where

playback stopped (RESUME) and you can lock all buttons

of the set so that no action will be executed (HOLD).

Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1 Switch the slider to RESUME during playback to activate RESUME.

yresume is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

yresume is shown and playback continues

from where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

yresume goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a

key is pressed, no action will be executed. This is of use, for example, when

transporting the player in a bag. With HOLD activated, you can avoid accidental

activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off,

hold will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME,

you will be activating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as

this will invalidate the warranty. If a fault occurs, ﬁrst check the points listed,

before taking the unit for repair. If you are unable to solve a problem by following

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

• Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean.

• Your adapter connection may be loose. Connect it securely.

• For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

• Check that the CD is clean and correctly inserted (label-side upward).

• If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication

HOLD is on and/or there is no reaction to controls

• If HOLD is activated, then deactivate it.

• Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

• The CD is damaged or dirty. Replace or clean the CD.

• RESUME, SHUFFLE or PROGRAMis active. Switch off whichever is on.

No sound or bad sound quality.

• PAUSE might be active. Press 2;.

• Loose, wrong or dirty connections. Check and clean connections.

• Volume might not be appropriately adjusted. Adjust the volume.

• Strong magnetic ﬁelds. Check player’s position and connections. Also keep

away from active mobile phones.

• For in-car use, check that the cassette adapter is inserted correctly, that the car

cassette player’s playback direction is correct (press autoreverse to change),

and that the cigarette lighter jack is clean. Allow time for temperature change.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a

single track or the entire CD, and to play the ﬁrst few

seconds of each track.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The

active mode is shown in the display.

yshufﬂe : All tracks of the CD are played in

random order until all of them have been played once.

yshufﬂe repeat all : All tracks of the CD

are played repeatedly in random order.

yrepeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The ﬁrst 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the

music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION

prevents loss of sound caused by light vibrations and shocks. Continuous playback

is ensured. However ESP does not prevent playback interruptions during vigorous

running. It also does not protect the unit against any damage caused by dropping!

On this set ESP is default on. It is possible to set ESP off and enter the Power

Save mode. The Power Save mode helps to extend battery

lifetime for longer playback.

• Press MODE for more than 2 seconds.

y disappears. power save modeis now activated.

• Press MODE again for more than 2 seconds.

y is displayed once

ESP on

➟ Power Save ➟ESP on

Selecting a track and searching

Selecting a track during playback

• Brieﬂy press ∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ∞ or § once or several times to select the desired track. The

track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.

4,5 V DC

12 V DC

CD REWRITABLE

OMPA

IBLE

program

repeat all

shuffle

resume

hold

IMPORTANT SAFETY INSTRUCTIONS

CONSIGNES DE SÉCURITÉ IMPORTANTES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves,or other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

11. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as if

the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12. Battery usage

CAUTION

– To prevent battery leakage which

may result in bodily injury, property damage or damage to the unit:

● Install ALL batteries correctly, + and - as marked on the unit.

● Do not mix batteries (OLD and NEW or CARBON and

ALKALINE, etc.).

● Remove batteries when the unit is not used for a long time.

EL 6474-E004: 02/8

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Respectez les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil à proximité d’une source d’eau.

6. Nettoyez l’appareil uniquement avec un chiffon sec.

7. N’obstruez aucun oriﬁce de ventilation. Installez l’appareil

selon les instructions du fabricant.

8. N’installez pas l’appareil près d’une source de chaleur

comme par exemple des radiateurs, bouches de chaleur, cuisinières,ou

autres appareils (même des ampliﬁcateurs) dégageant de la chaleur.

9. Utilisez uniquement des accessoires ou options recommandés

par le fabricant.

10. Utilisez uniquement un meuble sur roulettes, un

support, un pied, une étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un meuble sur

roulettes, veillez à le déplacer avec précaution aﬁn d’éviter

tout accident corporel si l’équipement se renversait.

11. Pour toute réparation, faites appel à un personnel qualiﬁé. Une

réparation sera nécessaire si l’appareil a subi des dommages tels que

détérioration du cordon d’alimentation ou de la prise, liquide renversé

sur l’appareil, ou encore si un objet est tombé dessus, si l’appareil a été

exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement

ou s’il a fait une chute.

12 .

PRÉCAUTIONd’emploi des piles

–Aﬁn d’éviter toute fuite des piles qui risquerait de causer des blessures

corporelles, des dommages matériels, ou d’endommager l’appareil :

● Installez TOUTES les piles correctement, + et - tels qu’indiqués sur

l’appareil.

● Ne mélangez pas les piles (pas de piles NEUVES avec des

USAGÉES ou de piles au CARBONE avec des ALCALINES, etc.).

● Enlevez les piles lorsque l’appareil reste inutilisé pendant une longue

période.

EL 6474-F003: 02/8

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Lea todos los avisos.

4. Siga todas las instrucciones.

5. No utilice este aparato cerca del agua.

6. Para limpiar el aparato utilice sólo un trapo seco.

7. No tape las aperturas de ventilación. Proceda a su

instalación de acuerdo con las instrucciones del fabricante.

8. No instale el equipo cerca de fuentes de calor – Como

radiadores, calentadores,estufas o cualquier otro aparato (incluyendo

los ampliﬁcadores) generador de calor.

9. Utilice exclusivamente aquellos dispositivos/

accesorios recomendados por el fabricante.

10. Coloque el equipo exclusivamente sobre aquellos

carros, bases,trípodes,soportes o mesas especiﬁcados por

el comerciante o vendidos con el equipo.Cuando utilice un

carro, tenga cuidado al desplazar el conjunto carro/equipo

para evitar posibles daños por vuelco.

11.

Confíe el mantenimiento y las reparaciones a personal técnico

especializado.El equipo deberá repararse siempre que haya resultado

dañado de alguna manera, como por ejemplo por daños en el cable o en

la clavija,por derrame de líquido sobre el equipo,por objetos que

hubieran podido introducirse en su interior, por exposición del equipo a la

lluvia o a ambientes húmedos, cuando el equipo no funcione con

normalidad o cuando hubiera sufrido algún tipo de caída.

12 .

Uso de las pilas – ADVERTENCIA:

Para prevenir escapes en las pilas, que pueden ocasionar

lesiones físicas, daños a su propiedad o dañar la unidad:

● Instale TODAS las pilas correctamente, + y - como está marcado en

la unidad.

● No mezcle las pilas (VIEJAS con NUEVAS o DE CARBONO y

ALCALINAS, etc.).

● Extraiga las pilas cuando no vaya a usar la unidad durante largo tiempo.

EL 6474-S003: 02/8

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is regis-

tered,you’re eligible to receive all the

privileges of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your

purchase at once, and take advantage

of these important benefits.

Warranty

Verification

Registering your product

within 10 days confirms

your right to maximum

protection under the

terms and conditions of

your Philips warranty.

Owner

Confirmation

Your completed

Warranty Registration

Card serves as verifica-

tion of ownership in the

event of product theft

or loss.

Model

Registration

Returning your Warranty

Registration Card right

away guarantees you’ll

receive all the information

and special offers which

you qualify for as the

owner of your model.

This “bolt of lightning”

indicates uninsulated material

within your unit may cause an

electrical shock.For the safety of

everyone in your household,please

do not remove product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed litera-

ture closely to prevent operating and

maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric

shock,match wide blade of plug to

wide slot,and fully insert.

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.Retain

this information for future reference.

Model No. _____________________

Serial No. ______________________

Know these

safety

symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MAC5097

PORTABLE COMPACT DISC

One Year Free Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to exchange the product.A sales receipt or other doc-

ument showing that you purchased the product is considered proof of purchase.Attach it

to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.For one year thereafter,a

defective or inoperative product will be replaced with a new,renewed or comparable

product at no charge to you.A replacement product is covered only for the original war-

ranty period.When the warranty on the original product expires,the warranty on the

replacement product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product,adjustment of customer controls

on the product,and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse,accident,unauthorized repair

or other cause not within the control of Philips.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed,manufactured,approved and/or

authorized,or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product.(Some states do not

allow the exclusion of incidental or consequential damages,so the above exclusion may

not apply to you.This includes, but is not limited to, prerecorded material,whether

copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed

by Philips.In countries where Philips does not distribute the product,the local Philips

service organization will attempt to provide a replacement product (although there may

be a delay if the appropriate product is not readily available).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967E007 / 8-02

BEFORE REQUESTING EXCHANGE...

Please check your owner's manual for assistance.If you have additional questions, call us

at 1-800-531-0039.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS...

Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and

freight prepaid,and with proof of purchase enclosed,to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A.,Puerto Rico,and U.S.Virgin Islands, all implied warranties,including implied war-

ranties of merchantability and fitness for a particular purpose,are limited in duration to

the duration of this express warranty.But,because some states do not allow limitations

on how long an implied warranty may last,this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada,this warranty is given in lieu of all other warranties.No other warranties are

expressed or implied,including any implied warranties of merchantability or fitness for a

particular purpose. Philips is not liable under any circumstances for any direct,indirect,

special,incidental or consequential damages,howsoever incurred,even if notified of the

possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product.Also,please fill

out and mail your warranty registration card promptly.It will be easier for us to notify

you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/pro

vince

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

• Dès que l’achat de votre appareil

Philips est enregistré,vous avez droit à

tous les avantages dont bénéficient les

possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à

votre appareil sans tarder et vous béné-

ficierez de ces avantages importants.

Vérification

de garantie

Enregistrez votre pro-

duit dans les 10 jours

pour confirmer votre

droit à une protection

maximum selon les

termes et les conditions

de votre garantie Philips.

Confirmation

de possession

Votre carte d’enreg-

istrement de garantie

prouve que vous pos-

sédez l’appareil en cas

de vol ou de perte du

produit.

Enregistrement

du modèle

Renvoyez votre carte

d’enregistrement de

garantie dès aujourd’hui

pour vous assurer de

recevoir toutes les

informations,les offres et

les bonus auxquels vous

avez droit en tant que

possesseur de ce modèle.

Cet «éclair à pointe de flèche»

indique qu’un matériau non isolé,

situé à l’intérieur de l’unité, risque de

provoquer un choc électrique. Pour la

sécurité de chacun, nous vous prions de

ne pas retirer le boîtier de ce produit.

Le «point d’exclamation» attire

votre attention sur des sujets

risquant de provoquer des problèmes de

fonctionnement et d’entretien si vous ne

lisez pas les informations s’y reportant.

DANGER :

NE PAS EXPOSER CET

ÉQUIPEMENT A LA PLUIE NI A UNE

HUMIDITÉ EXCESSIVE POUR ÉVITER LES

RISQUES D’INCENDIE ET DE CHOC

ÉLECTRIQUE.

ATTENTION : Pour éviter les

chocs électriques, introduire la lame la

plus large de la fiche dans la borne

correspondante de la prise et pousser

jusqu’au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série

situé à l’arrière du bloc.Conservez cette

information pour vous y reporter à l’avenir.

N° de modèle __________________

N° de série ____________________

Connaissez ces

symboles de

sécurite

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

MAC5097

Envie hoy su Tarjeta de Registro de la Garantía

para recibir todas las ventajas correspondientes.

• Una vez que se registre la compra de

su aparato Philips, Ud.tiene derecho a

todas las ventajas correspondientes al

dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

laTarjeta de Registro de la Garantía

empacada con su aparato y saque

provecho de estas ventajas importantes.

Verificación

de la garantía

Registre su producto

dentro de 10días para

confirmar su derecho a

máxima protección

bajo los términos y

condiciones de la garan-

tía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro

de la Garantía comprue-

ba que Ud.es el dueño

del aparato en caso de

robo o pérdida del pro-

ducto.

Registro

del modelo

La devolución inmediata

de su Tarjeta de Registro

de la Garantía le garantiza

que recibirá toda la infor-

mación y todas las pro-

mociones especiales que

le corresponden por ser

el dueño de su modelo.

El símbolo del «rayo» indica que

algún material no aislado dentro

de su unidad podría resultar en una

sacudida eléctrica.Para la seguridad de

todos,favor de no remover la cubierta

del producto.

El «signo de exclamación» le llama

la atención a características sobre

las que Ud.debe leer la información

adjunta detenidamente para evitar proble-

mas de funcionamiento y mantenimiento.

ADVERTENCIA: PARA

EVITAR EL RIESGO DE SACUDIDA

ELECTRICA O INCENDIO,NO

EXPONGA ESTE EQUIPO A LLUVIA

NI A HUMEDAD.

PRECAUCION: Para evitar

sacudida eléctrica,introduzca la patilla

ancha del enchufe al fondo de la ranura

ancha.

Para uso del cliente:

Escriba abajo el número de serie que se

encuentra en el panel posterior.

Guarde esta información para el futuro.

No.de modelo _________________

No.de serie ____________________

Conozca estos

simbolos de

seguridad

MAC5097

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

BELT CLIP CLIP CEINTURE CINTURÓN DE CIERRE

English

(supplied or optionally available)

1 To attach the belt clip to the CD player, position the shaped grip (found on the back of

the belt grip) so that it ﬁts into the belt clip hole of the CD player. Turn the clip to

LOCK as indicated on the CD player.

2 To detach, gently lift the belt clip and turn to RELEASE as indicated on the CD player.

Français

(fourni ou en option)

1 Pour ﬁxer le clip ceinture, placez l’attache (située sur le dos du clip) dans le trou prévu

à cet effet sur l’appareil. Tournez l’attache jusqu’à LOCK, comme indiqué sur l’appareil.

2 Pour enlever l’attache, soulevez-la doucement et tournez-la jusqu’à RELEASE.

Español

(suministrado o disponible de forma opcional)

1 Para ponerse el cinturón, encaje el broche (en la parte posterior del cinturón) en el oriﬁcio

del cinturón de cierre. Gire el cierre hasta LOCK tal y como se indica.

2 Para quitárselo, levante con cuidado el cinturón y gire hasta RELEASE tal y como se indica.

BELT CLIP

LIFT

LOCK

RELEASE

Meet Philips at the Internet

http://www.philipsusa.com

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

CAUTION

Use of controls or adjustments or performance of procedures other than

herein may result in hazardous radiation exposure or other unsafe

operation.

ATTENTION

L’utilisation de commandes ou de réglages ou l’exécution de procédures

autres que celles décrites dans le présent manuel risque

d’entraîner une exposition à un rayonnement dangereux ou d’avoir d’autres

conséquences sur la sécurité.

PRECAUCIÓN

La utilización de controles o ajustes y la realización de procedimientos

distintos de los contenidos en este manual pueden provocar la

exposición a radiaciones peligrosas y a otros peligros.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento

dependiente de dos condiciones siguientes:

1. Este aparato no puede provocar interferencia dañina, y

2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuﬁciente.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement

soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et

2. Cet appareil doit accepter toute interférence reçue, y compris les

interférences susceptibles de provoquer un fonctionement peu satisfaisant.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

NOTES

Canada

English: This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference Regulations

of the Canadian Department of Communications.

Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de Classe B prescrites dans

le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des

Communications du Canada.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Read this manual ﬁrst!

If you have any problems, do not attempt

to return this product to the store.

For fast help, call us ﬁrst!

1-800-531-0039

Return

your Warranty

Registration Card

within 10 days

Portable CD Player

AX3211, AX3212, AX3213, AX3214, AX3215

AX3216, AX3217, AX3218, AX3219, AX3220

AX3221, AX3222, AX3223, AX3224, AX3225

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown

in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol

ﬂashes, bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Normal 5 hours 6 hours

Alkaline 16 hours 20 hours

Batteries contain chemical substances, so they should be disposed

of properly.

AX32XX /17 30/10/02 11:00 Page 1

3140 115 2968.1 Printed in China

1 OPEN

HOLD➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

CLASS 1

LASER PRODUCT

English

Français

Español

English

CONTROLS / POWER SUPPLY

ONTROLS ( see ﬁgure

)

1 OPEN 2 ..............opens the CD lid

2 ∞ .......................skips and searches CD tracks backwards

3 § .......................skips and searches CD tracks forwards

4 2; ......................switches the player on, starts or pauses CD play

5 9.........................stops CD play, clears a program or switches the player off

6 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

7 ............................display

8 MODE.................selects the different playing possibilities: shufﬂe,

shufﬂe repeat all, repeat, repeat all and SCAN

9 PROGRAM..........programs tracks and reviews the program

0 RESUME.............stores the last position of a CD track played

HOLD...................locks all buttons

OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone jack and LINE OUT jack to connect the

player to another audio input of an additional appliance,

remote control (not on all versions)

@ VOL E ............adjusts the volume

# 4.5V DC...............jack for external power supply

$ ............................belt clip holder

% ............................type plate

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1 Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the

player and to the wall outlet.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, dead batteries and old equipment.

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

adapter. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2 Plug the voltage converter into the

cigarette lighter jack (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input jack on the

set.

3 If necessary, clean the cigarette lighter jack to obtain a good electrical con-

tact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter jack-

when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal

lead to this LINE IN jack and to LINE OUT/p on the set.

CD PLAY / FEATURES

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CDhas not been

ﬁnalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

y is shown if the bass enhancement is

activated.

Remote control (supplied or optionally available)

Use the AY 3768 cord remote control.The buttons on the remote

control have the same functions as the corresponding buttons on the set.

1 Press 9 twice to switch off the set.

2 Firmly connect the remote control to LINE OUT/p on the set.

3 Adjust the volume VOL E on the CD player and remote control.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program.

A single track may be stored more than once in the

program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

yprogram lights up; the track number

programmed and P with the total number of

stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

yprogram is shown and playback starts.

• You can review the program by pressing PROGRAM

for more than 2 seconds.

yThe display shows all the stored tracks in

sequence.

Notes: – If you press PROGRAM and there is no track selected, SEL is

displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

yCLR is displayed once, program goes off,

and the program is cleared.

Note: The program will also be cleared if the power

supply is interrupted, or if the CD-player lid is

opened, or if the set switches off automatically.

FEATURES / TROUBLESHOOTING

RESUME and HOLD

You can interrupt playback and continue (even after an

extended period of time) from the position where

playback stopped (RESUME) and you can lock all buttons

of the set so that no action will be executed (HOLD).

Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1 Switch the slider to RESUME during playback to activate RESUME.

yresume is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

yresume is shown and playback continues

from where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

yresume goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a

key is pressed, no action will be executed. This is of use, for example, when

transporting the player in a bag. With HOLD activated, you can avoid accidental

activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off,

hold will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME,

you will be activating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as

this will invalidate the warranty. If a fault occurs, ﬁrst check the points listed,

before taking the unit for repair. If you are unable to solve a problem by following

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

• Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean.

• Your adapter connection may be loose. Connect it securely.

• For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

• Check that the CD is clean and correctly inserted (label-side upward).

• If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication

HOLD is on and/or there is no reaction to controls

• If HOLD is activated, then deactivate it.

• Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

• The CD is damaged or dirty. Replace or clean the CD.

• RESUME, SHUFFLE or PROGRAMis active. Switch off whichever is on.

No sound or bad sound quality.

• PAUSE might be active. Press 2;.

• Loose, wrong or dirty connections. Check and clean connections.

• Volume might not be appropriately adjusted. Adjust the volume.

• Strong magnetic ﬁelds. Check player’s position and connections. Also keep

away from active mobile phones.

• For in-car use, check that the cassette adapter is inserted correctly, that the car

cassette player’s playback direction is correct (press autoreverse to change),

and that the cigarette lighter jack is clean. Allow time for temperature change.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a

single track or the entire CD, and to play the ﬁrst few

seconds of each track.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The

active mode is shown in the display.

yshufﬂe : All tracks of the CD are played in

random order until all of them have been played once.

yshufﬂe repeat all : All tracks of the CD

are played repeatedly in random order.

yrepeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The ﬁrst 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the

music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION

prevents loss of sound caused by light vibrations and shocks. Continuous playback

is ensured. However ESP does not prevent playback interruptions during vigorous

running. It also does not protect the unit against any damage caused by dropping!

On this set ESP is default on. It is possible to set ESP off and enter the Power

Save mode. The Power Save mode helps to extend battery

lifetime for longer playback.

• Press MODE for more than 2 seconds.

y disappears. power save modeis now activated.

• Press MODE again for more than 2 seconds.

y is displayed once

ESP on

➟ Power Save ➟ESP on

Selecting a track and searching

Selecting a track during playback

• Brieﬂy press ∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ∞ or § once or several times to select the desired track. The

track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.

4,5 V DC

12 V DC

CD REWRITABLE

OMPA

IBLE

program

repeat all

shuffle

resume

hold

IMPORTANT SAFETY INSTRUCTIONS

CONSIGNES DE SÉCURITÉ IMPORTANTES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves,or other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

11. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as if

the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12. Battery usage

CAUTION

– To prevent battery leakage which

may result in bodily injury, property damage or damage to the unit:

● Install ALL batteries correctly, + and - as marked on the unit.

● Do not mix batteries (OLD and NEW or CARBON and

ALKALINE, etc.).

● Remove batteries when the unit is not used for a long time.

EL 6474-E004: 02/8

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Respectez les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil à proximité d’une source d’eau.

6. Nettoyez l’appareil uniquement avec un chiffon sec.

7. N’obstruez aucun oriﬁce de ventilation. Installez l’appareil

selon les instructions du fabricant.

8. N’installez pas l’appareil près d’une source de chaleur

comme par exemple des radiateurs, bouches de chaleur, cuisinières,ou

autres appareils (même des ampliﬁcateurs) dégageant de la chaleur.

9. Utilisez uniquement des accessoires ou options recommandés

par le fabricant.

10. Utilisez uniquement un meuble sur roulettes, un

support, un pied, une étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un meuble sur

roulettes, veillez à le déplacer avec précaution aﬁn d’éviter

tout accident corporel si l’équipement se renversait.

11. Pour toute réparation, faites appel à un personnel qualiﬁé. Une

réparation sera nécessaire si l’appareil a subi des dommages tels que

détérioration du cordon d’alimentation ou de la prise, liquide renversé

sur l’appareil, ou encore si un objet est tombé dessus, si l’appareil a été

exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement

ou s’il a fait une chute.

12 .

PRÉCAUTIONd’emploi des piles

–Aﬁn d’éviter toute fuite des piles qui risquerait de causer des blessures

corporelles, des dommages matériels, ou d’endommager l’appareil :

● Installez TOUTES les piles correctement, + et - tels qu’indiqués sur

l’appareil.

● Ne mélangez pas les piles (pas de piles NEUVES avec des

USAGÉES ou de piles au CARBONE avec des ALCALINES, etc.).

● Enlevez les piles lorsque l’appareil reste inutilisé pendant une longue

période.

EL 6474-F003: 02/8

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Lea todos los avisos.

4. Siga todas las instrucciones.

5. No utilice este aparato cerca del agua.

6. Para limpiar el aparato utilice sólo un trapo seco.

7. No tape las aperturas de ventilación. Proceda a su

instalación de acuerdo con las instrucciones del fabricante.

8. No instale el equipo cerca de fuentes de calor – Como

radiadores, calentadores,estufas o cualquier otro aparato (incluyendo

los ampliﬁcadores) generador de calor.

9. Utilice exclusivamente aquellos dispositivos/

accesorios recomendados por el fabricante.

10. Coloque el equipo exclusivamente sobre aquellos

carros, bases,trípodes,soportes o mesas especiﬁcados por

el comerciante o vendidos con el equipo.Cuando utilice un

carro, tenga cuidado al desplazar el conjunto carro/equipo

para evitar posibles daños por vuelco.

11.

Confíe el mantenimiento y las reparaciones a personal técnico

especializado.El equipo deberá repararse siempre que haya resultado

dañado de alguna manera, como por ejemplo por daños en el cable o en

la clavija,por derrame de líquido sobre el equipo,por objetos que

hubieran podido introducirse en su interior, por exposición del equipo a la

lluvia o a ambientes húmedos, cuando el equipo no funcione con

normalidad o cuando hubiera sufrido algún tipo de caída.

12 .

Uso de las pilas – ADVERTENCIA:

Para prevenir escapes en las pilas, que pueden ocasionar

lesiones físicas, daños a su propiedad o dañar la unidad:

● Instale TODAS las pilas correctamente, + y - como está marcado en

la unidad.

● No mezcle las pilas (VIEJAS con NUEVAS o DE CARBONO y

ALCALINAS, etc.).

● Extraiga las pilas cuando no vaya a usar la unidad durante largo tiempo.

EL 6474-S003: 02/8

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is regis-

tered,you’re eligible to receive all the

privileges of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your

purchase at once, and take advantage

of these important benefits.

Warranty

Verification

Registering your product

within 10 days confirms

your right to maximum

protection under the

terms and conditions of

your Philips warranty.

Owner

Confirmation

Your completed

Warranty Registration

Card serves as verifica-

tion of ownership in the

event of product theft

or loss.

Model

Registration

Returning your Warranty

Registration Card right

away guarantees you’ll

receive all the information

and special offers which

you qualify for as the

owner of your model.

This “bolt of lightning”

indicates uninsulated material

within your unit may cause an

electrical shock.For the safety of

everyone in your household,please

do not remove product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed litera-

ture closely to prevent operating and

maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric

shock,match wide blade of plug to

wide slot,and fully insert.

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.Retain

this information for future reference.

Model No. _____________________

Serial No. ______________________

Know these

safety

symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MAC5097

PORTABLE COMPACT DISC

One Year Free Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to exchange the product.A sales receipt or other doc-

ument showing that you purchased the product is considered proof of purchase.Attach it

to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.For one year thereafter,a

defective or inoperative product will be replaced with a new,renewed or comparable

product at no charge to you.A replacement product is covered only for the original war-

ranty period.When the warranty on the original product expires,the warranty on the

replacement product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product,adjustment of customer controls

on the product,and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse,accident,unauthorized repair

or other cause not within the control of Philips.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed,manufactured,approved and/or

authorized,or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product.(Some states do not

allow the exclusion of incidental or consequential damages,so the above exclusion may

not apply to you.This includes, but is not limited to, prerecorded material,whether

copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed

by Philips.In countries where Philips does not distribute the product,the local Philips

service organization will attempt to provide a replacement product (although there may

be a delay if the appropriate product is not readily available).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967E007 / 8-02

BEFORE REQUESTING EXCHANGE...

Please check your owner's manual for assistance.If you have additional questions, call us

at 1-800-531-0039.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS...

Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and

freight prepaid,and with proof of purchase enclosed,to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A.,Puerto Rico,and U.S.Virgin Islands, all implied warranties,including implied war-

ranties of merchantability and fitness for a particular purpose,are limited in duration to

the duration of this express warranty.But,because some states do not allow limitations

on how long an implied warranty may last,this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada,this warranty is given in lieu of all other warranties.No other warranties are

expressed or implied,including any implied warranties of merchantability or fitness for a

particular purpose. Philips is not liable under any circumstances for any direct,indirect,

special,incidental or consequential damages,howsoever incurred,even if notified of the

possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product.Also,please fill

out and mail your warranty registration card promptly.It will be easier for us to notify

you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/pro

vince

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

• Dès que l’achat de votre appareil

Philips est enregistré,vous avez droit à

tous les avantages dont bénéficient les

possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à

votre appareil sans tarder et vous béné-

ficierez de ces avantages importants.

Vérification

de garantie

Enregistrez votre pro-

duit dans les 10 jours

pour confirmer votre

droit à une protection

maximum selon les

termes et les conditions

de votre garantie Philips.

Confirmation

de possession

Votre carte d’enreg-

istrement de garantie

prouve que vous pos-

sédez l’appareil en cas

de vol ou de perte du

produit.

Enregistrement

du modèle

Renvoyez votre carte

d’enregistrement de

garantie dès aujourd’hui

pour vous assurer de

recevoir toutes les

informations,les offres et

les bonus auxquels vous

avez droit en tant que

possesseur de ce modèle.

Cet «éclair à pointe de flèche»

indique qu’un matériau non isolé,

situé à l’intérieur de l’unité, risque de

provoquer un choc électrique. Pour la

sécurité de chacun, nous vous prions de

ne pas retirer le boîtier de ce produit.

Le «point d’exclamation» attire

votre attention sur des sujets

risquant de provoquer des problèmes de

fonctionnement et d’entretien si vous ne

lisez pas les informations s’y reportant.

DANGER :

NE PAS EXPOSER CET

ÉQUIPEMENT A LA PLUIE NI A UNE

HUMIDITÉ EXCESSIVE POUR ÉVITER LES

RISQUES D’INCENDIE ET DE CHOC

ÉLECTRIQUE.

ATTENTION : Pour éviter les

chocs électriques, introduire la lame la

plus large de la fiche dans la borne

correspondante de la prise et pousser

jusqu’au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série

situé à l’arrière du bloc.Conservez cette

information pour vous y reporter à l’avenir.

N° de modèle __________________

N° de série ____________________

Connaissez ces

symboles de

sécurite

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

MAC5097

Envie hoy su Tarjeta de Registro de la Garantía

para recibir todas las ventajas correspondientes.

• Una vez que se registre la compra de

su aparato Philips, Ud.tiene derecho a

todas las ventajas correspondientes al

dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

laTarjeta de Registro de la Garantía

empacada con su aparato y saque

provecho de estas ventajas importantes.

Verificación

de la garantía

Registre su producto

dentro de 10días para

confirmar su derecho a

máxima protección

bajo los términos y

condiciones de la garan-

tía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro

de la Garantía comprue-

ba que Ud.es el dueño

del aparato en caso de

robo o pérdida del pro-

ducto.

Registro

del modelo

La devolución inmediata

de su Tarjeta de Registro

de la Garantía le garantiza

que recibirá toda la infor-

mación y todas las pro-

mociones especiales que

le corresponden por ser

el dueño de su modelo.

El símbolo del «rayo» indica que

algún material no aislado dentro

de su unidad podría resultar en una

sacudida eléctrica.Para la seguridad de

todos,favor de no remover la cubierta

del producto.

El «signo de exclamación» le llama

la atención a características sobre

las que Ud.debe leer la información

adjunta detenidamente para evitar proble-

mas de funcionamiento y mantenimiento.

ADVERTENCIA: PARA

EVITAR EL RIESGO DE SACUDIDA

ELECTRICA O INCENDIO,NO

EXPONGA ESTE EQUIPO A LLUVIA

NI A HUMEDAD.

PRECAUCION: Para evitar

sacudida eléctrica,introduzca la patilla

ancha del enchufe al fondo de la ranura

ancha.

Para uso del cliente:

Escriba abajo el número de serie que se

encuentra en el panel posterior.

Guarde esta información para el futuro.

No.de modelo _________________

No.de serie ____________________

Conozca estos

simbolos de

seguridad

MAC5097

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

BELT CLIP CLIP CEINTURE CINTURÓN DE CIERRE

English

(supplied or optionally available)

1 To attach the belt clip to the CD player, position the shaped grip (found on the back of

the belt grip) so that it ﬁts into the belt clip hole of the CD player. Turn the clip to

LOCK as indicated on the CD player.

2 To detach, gently lift the belt clip and turn to RELEASE as indicated on the CD player.

Français

(fourni ou en option)

1 Pour ﬁxer le clip ceinture, placez l’attache (située sur le dos du clip) dans le trou prévu

à cet effet sur l’appareil. Tournez l’attache jusqu’à LOCK, comme indiqué sur l’appareil.

2 Pour enlever l’attache, soulevez-la doucement et tournez-la jusqu’à RELEASE.

Español

(suministrado o disponible de forma opcional)

1 Para ponerse el cinturón, encaje el broche (en la parte posterior del cinturón) en el oriﬁcio

del cinturón de cierre. Gire el cierre hasta LOCK tal y como se indica.

2 Para quitárselo, levante con cuidado el cinturón y gire hasta RELEASE tal y como se indica.

BELT CLIP

LIFT

LOCK

RELEASE

Meet Philips at the Internet

http://www.philipsusa.com

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

CAUTION

Use of controls or adjustments or performance of procedures other than

herein may result in hazardous radiation exposure or other unsafe

operation.

ATTENTION

L’utilisation de commandes ou de réglages ou l’exécution de procédures

autres que celles décrites dans le présent manuel risque

d’entraîner une exposition à un rayonnement dangereux ou d’avoir d’autres

conséquences sur la sécurité.

PRECAUCIÓN

La utilización de controles o ajustes y la realización de procedimientos

distintos de los contenidos en este manual pueden provocar la

exposición a radiaciones peligrosas y a otros peligros.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento

dependiente de dos condiciones siguientes:

1. Este aparato no puede provocar interferencia dañina, y

2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuﬁciente.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement

soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et

2. Cet appareil doit accepter toute interférence reçue, y compris les

interférences susceptibles de provoquer un fonctionement peu satisfaisant.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

NOTES

Canada

English: This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference Regulations

of the Canadian Department of Communications.

Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de Classe B prescrites dans

le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des

Communications du Canada.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Read this manual ﬁrst!

If you have any problems, do not attempt

to return this product to the store.

For fast help, call us ﬁrst!

1-800-531-0039

Return

your Warranty

Registration Card

within 10 days

Portable CD Player

AX3211, AX3212, AX3213, AX3214, AX3215

AX3216, AX3217, AX3218, AX3219, AX3220

AX3221, AX3222, AX3223, AX3224, AX3225

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown

in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol

ﬂashes, bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Normal 5 hours 6 hours

Alkaline 16 hours 20 hours

Batteries contain chemical substances, so they should be disposed

of properly.

AX32XX /17 30/10/02 11:00 Page 1

3140 115 2968.1 Printed in China

1 OPEN

HOLD➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

CLASS 1

LASER PRODUCT

English

Français

Español

English

CONTROLS / POWER SUPPLY

ONTROLS ( see ﬁgure

)

1 OPEN 2 ..............opens the CD lid

2 ∞ .......................skips and searches CD tracks backwards

3 § .......................skips and searches CD tracks forwards

4 2; ......................switches the player on, starts or pauses CD play

5 9.........................stops CD play, clears a program or switches the player off

6 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

7 ............................display

8 MODE.................selects the different playing possibilities: shufﬂe,

shufﬂe repeat all, repeat, repeat all and SCAN

9 PROGRAM..........programs tracks and reviews the program

0 RESUME.............stores the last position of a CD track played

HOLD...................locks all buttons

OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone jack and LINE OUT jack to connect the

player to another audio input of an additional appliance,

remote control (not on all versions)

@ VOL E ............adjusts the volume

# 4.5V DC...............jack for external power supply

$ ............................belt clip holder

% ............................type plate

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1 Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the

player and to the wall outlet.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, dead batteries and old equipment.

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

adapter. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2 Plug the voltage converter into the

cigarette lighter jack (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input jack on the

set.

3 If necessary, clean the cigarette lighter jack to obtain a good electrical con-

tact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter jack-

when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal

lead to this LINE IN jack and to LINE OUT/p on the set.

CD PLAY / FEATURES

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CDhas not been

ﬁnalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

y is shown if the bass enhancement is

activated.

Remote control (supplied or optionally available)

Use the AY 3768 cord remote control.The buttons on the remote

control have the same functions as the corresponding buttons on the set.

1 Press 9 twice to switch off the set.

2 Firmly connect the remote control to LINE OUT/p on the set.

3 Adjust the volume VOL E on the CD player and remote control.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program.

A single track may be stored more than once in the

program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

yprogram lights up; the track number

programmed and P with the total number of

stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

yprogram is shown and playback starts.

• You can review the program by pressing PROGRAM

for more than 2 seconds.

yThe display shows all the stored tracks in

sequence.

Notes: – If you press PROGRAM and there is no track selected, SEL is

displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

yCLR is displayed once, program goes off,

and the program is cleared.

Note: The program will also be cleared if the power

supply is interrupted, or if the CD-player lid is

opened, or if the set switches off automatically.

FEATURES / TROUBLESHOOTING

RESUME and HOLD

You can interrupt playback and continue (even after an

extended period of time) from the position where

playback stopped (RESUME) and you can lock all buttons

of the set so that no action will be executed (HOLD).

Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1 Switch the slider to RESUME during playback to activate RESUME.

yresume is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

yresume is shown and playback continues

from where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

yresume goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a

key is pressed, no action will be executed. This is of use, for example, when

transporting the player in a bag. With HOLD activated, you can avoid accidental

activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off,

hold will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME,

you will be activating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as

this will invalidate the warranty. If a fault occurs, ﬁrst check the points listed,

before taking the unit for repair. If you are unable to solve a problem by following

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

• Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean.

• Your adapter connection may be loose. Connect it securely.

• For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

• Check that the CD is clean and correctly inserted (label-side upward).

• If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication

HOLD is on and/or there is no reaction to controls

• If HOLD is activated, then deactivate it.

• Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

• The CD is damaged or dirty. Replace or clean the CD.

• RESUME, SHUFFLE or PROGRAMis active. Switch off whichever is on.

No sound or bad sound quality.

• PAUSE might be active. Press 2;.

• Loose, wrong or dirty connections. Check and clean connections.

• Volume might not be appropriately adjusted. Adjust the volume.

• Strong magnetic ﬁelds. Check player’s position and connections. Also keep

away from active mobile phones.

• For in-car use, check that the cassette adapter is inserted correctly, that the car

cassette player’s playback direction is correct (press autoreverse to change),

and that the cigarette lighter jack is clean. Allow time for temperature change.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a

single track or the entire CD, and to play the ﬁrst few

seconds of each track.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The

active mode is shown in the display.

yshufﬂe : All tracks of the CD are played in

random order until all of them have been played once.

yshufﬂe repeat all : All tracks of the CD

are played repeatedly in random order.

yrepeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The ﬁrst 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the

music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION

prevents loss of sound caused by light vibrations and shocks. Continuous playback

is ensured. However ESP does not prevent playback interruptions during vigorous

running. It also does not protect the unit against any damage caused by dropping!

On this set ESP is default on. It is possible to set ESP off and enter the Power

Save mode. The Power Save mode helps to extend battery

lifetime for longer playback.

• Press MODE for more than 2 seconds.

y disappears. power save modeis now activated.

• Press MODE again for more than 2 seconds.

y is displayed once

ESP on

➟ Power Save ➟ESP on

Selecting a track and searching

Selecting a track during playback

• Brieﬂy press ∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ∞ or § once or several times to select the desired track. The

track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.

4,5 V DC

12 V DC

CD REWRITABLE

OMPA

IBLE

program

repeat all

shuffle

resume

hold

IMPORTANT SAFETY INSTRUCTIONS

CONSIGNES DE SÉCURITÉ IMPORTANTES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves,or other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

11. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as if

the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12. Battery usage

CAUTION

– To prevent battery leakage which

may result in bodily injury, property damage or damage to the unit:

● Install ALL batteries correctly, + and - as marked on the unit.

● Do not mix batteries (OLD and NEW or CARBON and

ALKALINE, etc.).

● Remove batteries when the unit is not used for a long time.

EL 6474-E004: 02/8

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Respectez les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil à proximité d’une source d’eau.

6. Nettoyez l’appareil uniquement avec un chiffon sec.

7. N’obstruez aucun oriﬁce de ventilation. Installez l’appareil

selon les instructions du fabricant.

8. N’installez pas l’appareil près d’une source de chaleur

comme par exemple des radiateurs, bouches de chaleur, cuisinières,ou

autres appareils (même des ampliﬁcateurs) dégageant de la chaleur.

9. Utilisez uniquement des accessoires ou options recommandés

par le fabricant.

10. Utilisez uniquement un meuble sur roulettes, un

support, un pied, une étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un meuble sur

roulettes, veillez à le déplacer avec précaution aﬁn d’éviter

tout accident corporel si l’équipement se renversait.

11. Pour toute réparation, faites appel à un personnel qualiﬁé. Une

réparation sera nécessaire si l’appareil a subi des dommages tels que

détérioration du cordon d’alimentation ou de la prise, liquide renversé

sur l’appareil, ou encore si un objet est tombé dessus, si l’appareil a été

exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement

ou s’il a fait une chute.

12 .

PRÉCAUTIONd’emploi des piles

–Aﬁn d’éviter toute fuite des piles qui risquerait de causer des blessures

corporelles, des dommages matériels, ou d’endommager l’appareil :

● Installez TOUTES les piles correctement, + et - tels qu’indiqués sur

l’appareil.

● Ne mélangez pas les piles (pas de piles NEUVES avec des

USAGÉES ou de piles au CARBONE avec des ALCALINES, etc.).

● Enlevez les piles lorsque l’appareil reste inutilisé pendant une longue

période.

EL 6474-F003: 02/8

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Lea todos los avisos.

4. Siga todas las instrucciones.

5. No utilice este aparato cerca del agua.

6. Para limpiar el aparato utilice sólo un trapo seco.

7. No tape las aperturas de ventilación. Proceda a su

instalación de acuerdo con las instrucciones del fabricante.

8. No instale el equipo cerca de fuentes de calor – Como

radiadores, calentadores,estufas o cualquier otro aparato (incluyendo

los ampliﬁcadores) generador de calor.

9. Utilice exclusivamente aquellos dispositivos/

accesorios recomendados por el fabricante.

10. Coloque el equipo exclusivamente sobre aquellos

carros, bases,trípodes,soportes o mesas especiﬁcados por

el comerciante o vendidos con el equipo.Cuando utilice un

carro, tenga cuidado al desplazar el conjunto carro/equipo

para evitar posibles daños por vuelco.

11.

Confíe el mantenimiento y las reparaciones a personal técnico

especializado.El equipo deberá repararse siempre que haya resultado

dañado de alguna manera, como por ejemplo por daños en el cable o en

la clavija,por derrame de líquido sobre el equipo,por objetos que

hubieran podido introducirse en su interior, por exposición del equipo a la

lluvia o a ambientes húmedos, cuando el equipo no funcione con

normalidad o cuando hubiera sufrido algún tipo de caída.

12 .

Uso de las pilas – ADVERTENCIA:

Para prevenir escapes en las pilas, que pueden ocasionar

lesiones físicas, daños a su propiedad o dañar la unidad:

● Instale TODAS las pilas correctamente, + y - como está marcado en

la unidad.

● No mezcle las pilas (VIEJAS con NUEVAS o DE CARBONO y

ALCALINAS, etc.).

● Extraiga las pilas cuando no vaya a usar la unidad durante largo tiempo.

EL 6474-S003: 02/8

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is regis-

tered,you’re eligible to receive all the

privileges of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your

purchase at once, and take advantage

of these important benefits.

Warranty

Verification

Registering your product

within 10 days confirms

your right to maximum

protection under the

terms and conditions of

your Philips warranty.

Owner

Confirmation

Your completed

Warranty Registration

Card serves as verifica-

tion of ownership in the

event of product theft

or loss.

Model

Registration

Returning your Warranty

Registration Card right

away guarantees you’ll

receive all the information

and special offers which

you qualify for as the

owner of your model.

This “bolt of lightning”

indicates uninsulated material

within your unit may cause an

electrical shock.For the safety of

everyone in your household,please

do not remove product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed litera-

ture closely to prevent operating and

maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric

shock,match wide blade of plug to

wide slot,and fully insert.

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.Retain

this information for future reference.

Model No. _____________________

Serial No. ______________________

Know these

safety

symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MAC5097

PORTABLE COMPACT DISC

One Year Free Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to exchange the product.A sales receipt or other doc-

ument showing that you purchased the product is considered proof of purchase.Attach it

to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.For one year thereafter,a

defective or inoperative product will be replaced with a new,renewed or comparable

product at no charge to you.A replacement product is covered only for the original war-

ranty period.When the warranty on the original product expires,the warranty on the

replacement product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product,adjustment of customer controls

on the product,and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse,accident,unauthorized repair

or other cause not within the control of Philips.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed,manufactured,approved and/or

authorized,or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product.(Some states do not

allow the exclusion of incidental or consequential damages,so the above exclusion may

not apply to you.This includes, but is not limited to, prerecorded material,whether

copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed

by Philips.In countries where Philips does not distribute the product,the local Philips

service organization will attempt to provide a replacement product (although there may

be a delay if the appropriate product is not readily available).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967E007 / 8-02

BEFORE REQUESTING EXCHANGE...

Please check your owner's manual for assistance.If you have additional questions, call us

at 1-800-531-0039.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS...

Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and

freight prepaid,and with proof of purchase enclosed,to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A.,Puerto Rico,and U.S.Virgin Islands, all implied warranties,including implied war-

ranties of merchantability and fitness for a particular purpose,are limited in duration to

the duration of this express warranty.But,because some states do not allow limitations

on how long an implied warranty may last,this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada,this warranty is given in lieu of all other warranties.No other warranties are

expressed or implied,including any implied warranties of merchantability or fitness for a

particular purpose. Philips is not liable under any circumstances for any direct,indirect,

special,incidental or consequential damages,howsoever incurred,even if notified of the

possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product.Also,please fill

out and mail your warranty registration card promptly.It will be easier for us to notify

you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/pro

vince

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

• Dès que l’achat de votre appareil

Philips est enregistré,vous avez droit à

tous les avantages dont bénéficient les

possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à

votre appareil sans tarder et vous béné-

ficierez de ces avantages importants.

Vérification

de garantie

Enregistrez votre pro-

duit dans les 10 jours

pour confirmer votre

droit à une protection

maximum selon les

termes et les conditions

de votre garantie Philips.

Confirmation

de possession

Votre carte d’enreg-

istrement de garantie

prouve que vous pos-

sédez l’appareil en cas

de vol ou de perte du

produit.

Enregistrement

du modèle

Renvoyez votre carte

d’enregistrement de

garantie dès aujourd’hui

pour vous assurer de

recevoir toutes les

informations,les offres et

les bonus auxquels vous

avez droit en tant que

possesseur de ce modèle.

Cet «éclair à pointe de flèche»

indique qu’un matériau non isolé,

situé à l’intérieur de l’unité, risque de

provoquer un choc électrique. Pour la

sécurité de chacun, nous vous prions de

ne pas retirer le boîtier de ce produit.

Le «point d’exclamation» attire

votre attention sur des sujets

risquant de provoquer des problèmes de

fonctionnement et d’entretien si vous ne

lisez pas les informations s’y reportant.

DANGER :

NE PAS EXPOSER CET

ÉQUIPEMENT A LA PLUIE NI A UNE

HUMIDITÉ EXCESSIVE POUR ÉVITER LES

RISQUES D’INCENDIE ET DE CHOC

ÉLECTRIQUE.

ATTENTION : Pour éviter les

chocs électriques, introduire la lame la

plus large de la fiche dans la borne

correspondante de la prise et pousser

jusqu’au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série

situé à l’arrière du bloc.Conservez cette

information pour vous y reporter à l’avenir.

N° de modèle __________________

N° de série ____________________

Connaissez ces

symboles de

sécurite

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

MAC5097

Envie hoy su Tarjeta de Registro de la Garantía

para recibir todas las ventajas correspondientes.

• Una vez que se registre la compra de

su aparato Philips, Ud.tiene derecho a

todas las ventajas correspondientes al

dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

laTarjeta de Registro de la Garantía

empacada con su aparato y saque

provecho de estas ventajas importantes.

Verificación

de la garantía

Registre su producto

dentro de 10días para

confirmar su derecho a

máxima protección

bajo los términos y

condiciones de la garan-

tía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro

de la Garantía comprue-

ba que Ud.es el dueño

del aparato en caso de

robo o pérdida del pro-

ducto.

Registro

del modelo

La devolución inmediata

de su Tarjeta de Registro

de la Garantía le garantiza

que recibirá toda la infor-

mación y todas las pro-

mociones especiales que

le corresponden por ser

el dueño de su modelo.

El símbolo del «rayo» indica que

algún material no aislado dentro

de su unidad podría resultar en una

sacudida eléctrica.Para la seguridad de

todos,favor de no remover la cubierta

del producto.

El «signo de exclamación» le llama

la atención a características sobre

las que Ud.debe leer la información

adjunta detenidamente para evitar proble-

mas de funcionamiento y mantenimiento.

ADVERTENCIA: PARA

EVITAR EL RIESGO DE SACUDIDA

ELECTRICA O INCENDIO,NO

EXPONGA ESTE EQUIPO A LLUVIA

NI A HUMEDAD.

PRECAUCION: Para evitar

sacudida eléctrica,introduzca la patilla

ancha del enchufe al fondo de la ranura

ancha.

Para uso del cliente:

Escriba abajo el número de serie que se

encuentra en el panel posterior.

Guarde esta información para el futuro.

No.de modelo _________________

No.de serie ____________________

Conozca estos

simbolos de

seguridad

MAC5097

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

BELT CLIP CLIP CEINTURE CINTURÓN DE CIERRE

English

(supplied or optionally available)

1 To attach the belt clip to the CD player, position the shaped grip (found on the back of

the belt grip) so that it ﬁts into the belt clip hole of the CD player. Turn the clip to

LOCK as indicated on the CD player.

2 To detach, gently lift the belt clip and turn to RELEASE as indicated on the CD player.

Français

(fourni ou en option)

1 Pour ﬁxer le clip ceinture, placez l’attache (située sur le dos du clip) dans le trou prévu

à cet effet sur l’appareil. Tournez l’attache jusqu’à LOCK, comme indiqué sur l’appareil.

2 Pour enlever l’attache, soulevez-la doucement et tournez-la jusqu’à RELEASE.

Español

(suministrado o disponible de forma opcional)

1 Para ponerse el cinturón, encaje el broche (en la parte posterior del cinturón) en el oriﬁcio

del cinturón de cierre. Gire el cierre hasta LOCK tal y como se indica.

2 Para quitárselo, levante con cuidado el cinturón y gire hasta RELEASE tal y como se indica.

BELT CLIP

LIFT

LOCK

RELEASE

Meet Philips at the Internet

http://www.philipsusa.com

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

CAUTION

Use of controls or adjustments or performance of procedures other than

herein may result in hazardous radiation exposure or other unsafe

operation.

ATTENTION

L’utilisation de commandes ou de réglages ou l’exécution de procédures

autres que celles décrites dans le présent manuel risque

d’entraîner une exposition à un rayonnement dangereux ou d’avoir d’autres

conséquences sur la sécurité.

PRECAUCIÓN

La utilización de controles o ajustes y la realización de procedimientos

distintos de los contenidos en este manual pueden provocar la

exposición a radiaciones peligrosas y a otros peligros.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento

dependiente de dos condiciones siguientes:

1. Este aparato no puede provocar interferencia dañina, y

2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuﬁciente.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement

soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et

2. Cet appareil doit accepter toute interférence reçue, y compris les

interférences susceptibles de provoquer un fonctionement peu satisfaisant.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

NOTES

Canada

English: This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference Regulations

of the Canadian Department of Communications.

Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de Classe B prescrites dans

le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des

Communications du Canada.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Read this manual ﬁrst!

If you have any problems, do not attempt

to return this product to the store.

For fast help, call us ﬁrst!

1-800-531-0039

Return

your Warranty

Registration Card

within 10 days

Portable CD Player

AX3211, AX3212, AX3213, AX3214, AX3215

AX3216, AX3217, AX3218, AX3219, AX3220

AX3221, AX3222, AX3223, AX3224, AX3225

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown

in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol

ﬂashes, bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Normal 5 hours 6 hours

Alkaline 16 hours 20 hours

Batteries contain chemical substances, so they should be disposed

of properly.

AX32XX /17 30/10/02 11:00 Page 1

3140 115 2968.1 Printed in China

1 OPEN

HOLD➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

CLASS 1

LASER PRODUCT

English

Français

Español

English

CONTROLS / POWER SUPPLY

ONTROLS ( see ﬁgure

)

1 OPEN 2 ..............opens the CD lid

2 ∞ .......................skips and searches CD tracks backwards

3 § .......................skips and searches CD tracks forwards

4 2; ......................switches the player on, starts or pauses CD play

5 9.........................stops CD play, clears a program or switches the player off

6 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

7 ............................display

8 MODE.................selects the different playing possibilities: shufﬂe,

shufﬂe repeat all, repeat, repeat all and SCAN

9 PROGRAM..........programs tracks and reviews the program

0 RESUME.............stores the last position of a CD track played

HOLD...................locks all buttons

OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone jack and LINE OUT jack to connect the

player to another audio input of an additional appliance,

remote control (not on all versions)

@ VOL E ............adjusts the volume

# 4.5V DC...............jack for external power supply

$ ............................belt clip holder

% ............................type plate

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1 Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the

player and to the wall outlet.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, dead batteries and old equipment.

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

adapter. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2 Plug the voltage converter into the

cigarette lighter jack (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input jack on the

set.

3 If necessary, clean the cigarette lighter jack to obtain a good electrical con-

tact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter jack-

when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal

lead to this LINE IN jack and to LINE OUT/p on the set.

CD PLAY / FEATURES

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CDhas not been

ﬁnalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

y is shown if the bass enhancement is

activated.

Remote control (supplied or optionally available)

Use the AY 3768 cord remote control.The buttons on the remote

control have the same functions as the corresponding buttons on the set.

1 Press 9 twice to switch off the set.

2 Firmly connect the remote control to LINE OUT/p on the set.

3 Adjust the volume VOL E on the CD player and remote control.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program.

A single track may be stored more than once in the

program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

yprogram lights up; the track number

programmed and P with the total number of

stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

yprogram is shown and playback starts.

• You can review the program by pressing PROGRAM

for more than 2 seconds.

yThe display shows all the stored tracks in

sequence.

Notes: – If you press PROGRAM and there is no track selected, SEL is

displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

yCLR is displayed once, program goes off,

and the program is cleared.

Note: The program will also be cleared if the power

supply is interrupted, or if the CD-player lid is

opened, or if the set switches off automatically.

FEATURES / TROUBLESHOOTING

RESUME and HOLD

You can interrupt playback and continue (even after an

extended period of time) from the position where

playback stopped (RESUME) and you can lock all buttons

of the set so that no action will be executed (HOLD).

Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1 Switch the slider to RESUME during playback to activate RESUME.

yresume is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

yresume is shown and playback continues

from where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

yresume goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a

key is pressed, no action will be executed. This is of use, for example, when

transporting the player in a bag. With HOLD activated, you can avoid accidental

activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off,

hold will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME,

you will be activating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as

this will invalidate the warranty. If a fault occurs, ﬁrst check the points listed,

before taking the unit for repair. If you are unable to solve a problem by following

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

• Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean.

• Your adapter connection may be loose. Connect it securely.

• For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

• Check that the CD is clean and correctly inserted (label-side upward).

• If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication

HOLD is on and/or there is no reaction to controls

• If HOLD is activated, then deactivate it.

• Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

• The CD is damaged or dirty. Replace or clean the CD.

• RESUME, SHUFFLE or PROGRAMis active. Switch off whichever is on.

No sound or bad sound quality.

• PAUSE might be active. Press 2;.

• Loose, wrong or dirty connections. Check and clean connections.

• Volume might not be appropriately adjusted. Adjust the volume.

• Strong magnetic ﬁelds. Check player’s position and connections. Also keep

away from active mobile phones.

• For in-car use, check that the cassette adapter is inserted correctly, that the car

cassette player’s playback direction is correct (press autoreverse to change),

and that the cigarette lighter jack is clean. Allow time for temperature change.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a

single track or the entire CD, and to play the ﬁrst few

seconds of each track.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The

active mode is shown in the display.

yshufﬂe : All tracks of the CD are played in

random order until all of them have been played once.

yshufﬂe repeat all : All tracks of the CD

are played repeatedly in random order.

yrepeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The ﬁrst 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the

music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION

prevents loss of sound caused by light vibrations and shocks. Continuous playback

is ensured. However ESP does not prevent playback interruptions during vigorous

running. It also does not protect the unit against any damage caused by dropping!

On this set ESP is default on. It is possible to set ESP off and enter the Power

Save mode. The Power Save mode helps to extend battery

lifetime for longer playback.

• Press MODE for more than 2 seconds.

y disappears. power save modeis now activated.

• Press MODE again for more than 2 seconds.

y is displayed once

ESP on

➟ Power Save ➟ESP on

Selecting a track and searching

Selecting a track during playback

• Brieﬂy press ∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ∞ or § once or several times to select the desired track. The

track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.

4,5 V DC

12 V DC

CD REWRITABLE

OMPA

IBLE

program

repeat all

shuffle

resume

hold

IMPORTANT SAFETY INSTRUCTIONS

CONSIGNES DE SÉCURITÉ IMPORTANTES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves,or other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

11. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as if

the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12. Battery usage

CAUTION

– To prevent battery leakage which

may result in bodily injury, property damage or damage to the unit:

● Install ALL batteries correctly, + and - as marked on the unit.

● Do not mix batteries (OLD and NEW or CARBON and

ALKALINE, etc.).

● Remove batteries when the unit is not used for a long time.

EL 6474-E004: 02/8

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Respectez les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil à proximité d’une source d’eau.

6. Nettoyez l’appareil uniquement avec un chiffon sec.

7. N’obstruez aucun oriﬁce de ventilation. Installez l’appareil

selon les instructions du fabricant.

8. N’installez pas l’appareil près d’une source de chaleur

comme par exemple des radiateurs, bouches de chaleur, cuisinières,ou

autres appareils (même des ampliﬁcateurs) dégageant de la chaleur.

9. Utilisez uniquement des accessoires ou options recommandés

par le fabricant.

10. Utilisez uniquement un meuble sur roulettes, un

support, un pied, une étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un meuble sur

roulettes, veillez à le déplacer avec précaution aﬁn d’éviter

tout accident corporel si l’équipement se renversait.

11. Pour toute réparation, faites appel à un personnel qualiﬁé. Une

réparation sera nécessaire si l’appareil a subi des dommages tels que

détérioration du cordon d’alimentation ou de la prise, liquide renversé

sur l’appareil, ou encore si un objet est tombé dessus, si l’appareil a été

exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement

ou s’il a fait une chute.

12 .

PRÉCAUTIONd’emploi des piles

–Aﬁn d’éviter toute fuite des piles qui risquerait de causer des blessures

corporelles, des dommages matériels, ou d’endommager l’appareil :

● Installez TOUTES les piles correctement, + et - tels qu’indiqués sur

l’appareil.

● Ne mélangez pas les piles (pas de piles NEUVES avec des

USAGÉES ou de piles au CARBONE avec des ALCALINES, etc.).

● Enlevez les piles lorsque l’appareil reste inutilisé pendant une longue

période.

EL 6474-F003: 02/8

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Lea todos los avisos.

4. Siga todas las instrucciones.

5. No utilice este aparato cerca del agua.

6. Para limpiar el aparato utilice sólo un trapo seco.

7. No tape las aperturas de ventilación. Proceda a su

instalación de acuerdo con las instrucciones del fabricante.

8. No instale el equipo cerca de fuentes de calor – Como

radiadores, calentadores,estufas o cualquier otro aparato (incluyendo

los ampliﬁcadores) generador de calor.

9. Utilice exclusivamente aquellos dispositivos/

accesorios recomendados por el fabricante.

10. Coloque el equipo exclusivamente sobre aquellos

carros, bases,trípodes,soportes o mesas especiﬁcados por

el comerciante o vendidos con el equipo.Cuando utilice un

carro, tenga cuidado al desplazar el conjunto carro/equipo

para evitar posibles daños por vuelco.

11.

Confíe el mantenimiento y las reparaciones a personal técnico

especializado.El equipo deberá repararse siempre que haya resultado

dañado de alguna manera, como por ejemplo por daños en el cable o en

la clavija,por derrame de líquido sobre el equipo,por objetos que

hubieran podido introducirse en su interior, por exposición del equipo a la

lluvia o a ambientes húmedos, cuando el equipo no funcione con

normalidad o cuando hubiera sufrido algún tipo de caída.

12 .

Uso de las pilas – ADVERTENCIA:

Para prevenir escapes en las pilas, que pueden ocasionar

lesiones físicas, daños a su propiedad o dañar la unidad:

● Instale TODAS las pilas correctamente, + y - como está marcado en

la unidad.

● No mezcle las pilas (VIEJAS con NUEVAS o DE CARBONO y

ALCALINAS, etc.).

● Extraiga las pilas cuando no vaya a usar la unidad durante largo tiempo.

EL 6474-S003: 02/8

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is regis-

tered,you’re eligible to receive all the

privileges of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your

purchase at once, and take advantage

of these important benefits.

Warranty

Verification

Registering your product

within 10 days confirms

your right to maximum

protection under the

terms and conditions of

your Philips warranty.

Owner

Confirmation

Your completed

Warranty Registration

Card serves as verifica-

tion of ownership in the

event of product theft

or loss.

Model

Registration

Returning your Warranty

Registration Card right

away guarantees you’ll

receive all the information

and special offers which

you qualify for as the

owner of your model.

This “bolt of lightning”

indicates uninsulated material

within your unit may cause an

electrical shock.For the safety of

everyone in your household,please

do not remove product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed litera-

ture closely to prevent operating and

maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric

shock,match wide blade of plug to

wide slot,and fully insert.

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.Retain

this information for future reference.

Model No. _____________________

Serial No. ______________________

Know these

safety

symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MAC5097

PORTABLE COMPACT DISC

One Year Free Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to exchange the product.A sales receipt or other doc-

ument showing that you purchased the product is considered proof of purchase.Attach it

to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.For one year thereafter,a

defective or inoperative product will be replaced with a new,renewed or comparable

product at no charge to you.A replacement product is covered only for the original war-

ranty period.When the warranty on the original product expires,the warranty on the

replacement product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product,adjustment of customer controls

on the product,and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse,accident,unauthorized repair

or other cause not within the control of Philips.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed,manufactured,approved and/or

authorized,or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product.(Some states do not

allow the exclusion of incidental or consequential damages,so the above exclusion may

not apply to you.This includes, but is not limited to, prerecorded material,whether

copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed

by Philips.In countries where Philips does not distribute the product,the local Philips

service organization will attempt to provide a replacement product (although there may

be a delay if the appropriate product is not readily available).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967E007 / 8-02

BEFORE REQUESTING EXCHANGE...

Please check your owner's manual for assistance.If you have additional questions, call us

at 1-800-531-0039.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS...

Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and

freight prepaid,and with proof of purchase enclosed,to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A.,Puerto Rico,and U.S.Virgin Islands, all implied warranties,including implied war-

ranties of merchantability and fitness for a particular purpose,are limited in duration to

the duration of this express warranty.But,because some states do not allow limitations

on how long an implied warranty may last,this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada,this warranty is given in lieu of all other warranties.No other warranties are

expressed or implied,including any implied warranties of merchantability or fitness for a

particular purpose. Philips is not liable under any circumstances for any direct,indirect,

special,incidental or consequential damages,howsoever incurred,even if notified of the

possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product.Also,please fill

out and mail your warranty registration card promptly.It will be easier for us to notify

you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/pro

vince

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

• Dès que l’achat de votre appareil

Philips est enregistré,vous avez droit à

tous les avantages dont bénéficient les

possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à

votre appareil sans tarder et vous béné-

ficierez de ces avantages importants.

Vérification

de garantie

Enregistrez votre pro-

duit dans les 10 jours

pour confirmer votre

droit à une protection

maximum selon les

termes et les conditions

de votre garantie Philips.

Confirmation

de possession

Votre carte d’enreg-

istrement de garantie

prouve que vous pos-

sédez l’appareil en cas

de vol ou de perte du

produit.

Enregistrement

du modèle

Renvoyez votre carte

d’enregistrement de

garantie dès aujourd’hui

pour vous assurer de

recevoir toutes les

informations,les offres et

les bonus auxquels vous

avez droit en tant que

possesseur de ce modèle.

Cet «éclair à pointe de flèche»

indique qu’un matériau non isolé,

situé à l’intérieur de l’unité, risque de

provoquer un choc électrique. Pour la

sécurité de chacun, nous vous prions de

ne pas retirer le boîtier de ce produit.

Le «point d’exclamation» attire

votre attention sur des sujets

risquant de provoquer des problèmes de

fonctionnement et d’entretien si vous ne

lisez pas les informations s’y reportant.

DANGER :

NE PAS EXPOSER CET

ÉQUIPEMENT A LA PLUIE NI A UNE

HUMIDITÉ EXCESSIVE POUR ÉVITER LES

RISQUES D’INCENDIE ET DE CHOC

ÉLECTRIQUE.

ATTENTION : Pour éviter les

chocs électriques, introduire la lame la

plus large de la fiche dans la borne

correspondante de la prise et pousser

jusqu’au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série

situé à l’arrière du bloc.Conservez cette

information pour vous y reporter à l’avenir.

N° de modèle __________________

N° de série ____________________

Connaissez ces

symboles de

sécurite

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

MAC5097

Envie hoy su Tarjeta de Registro de la Garantía

para recibir todas las ventajas correspondientes.

• Una vez que se registre la compra de

su aparato Philips, Ud.tiene derecho a

todas las ventajas correspondientes al

dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

laTarjeta de Registro de la Garantía

empacada con su aparato y saque

provecho de estas ventajas importantes.

Verificación

de la garantía

Registre su producto

dentro de 10días para

confirmar su derecho a

máxima protección

bajo los términos y

condiciones de la garan-

tía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro

de la Garantía comprue-

ba que Ud.es el dueño

del aparato en caso de

robo o pérdida del pro-

ducto.

Registro

del modelo

La devolución inmediata

de su Tarjeta de Registro

de la Garantía le garantiza

que recibirá toda la infor-

mación y todas las pro-

mociones especiales que

le corresponden por ser

el dueño de su modelo.

El símbolo del «rayo» indica que

algún material no aislado dentro

de su unidad podría resultar en una

sacudida eléctrica.Para la seguridad de

todos,favor de no remover la cubierta

del producto.

El «signo de exclamación» le llama

la atención a características sobre

las que Ud.debe leer la información

adjunta detenidamente para evitar proble-

mas de funcionamiento y mantenimiento.

ADVERTENCIA: PARA

EVITAR EL RIESGO DE SACUDIDA

ELECTRICA O INCENDIO,NO

EXPONGA ESTE EQUIPO A LLUVIA

NI A HUMEDAD.

PRECAUCION: Para evitar

sacudida eléctrica,introduzca la patilla

ancha del enchufe al fondo de la ranura

ancha.

Para uso del cliente:

Escriba abajo el número de serie que se

encuentra en el panel posterior.

Guarde esta información para el futuro.

No.de modelo _________________

No.de serie ____________________

Conozca estos

simbolos de

seguridad

MAC5097

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

BELT CLIP CLIP CEINTURE CINTURÓN DE CIERRE

English

(supplied or optionally available)

1 To attach the belt clip to the CD player, position the shaped grip (found on the back of

the belt grip) so that it ﬁts into the belt clip hole of the CD player. Turn the clip to

LOCK as indicated on the CD player.

2 To detach, gently lift the belt clip and turn to RELEASE as indicated on the CD player.

Français

(fourni ou en option)

1 Pour ﬁxer le clip ceinture, placez l’attache (située sur le dos du clip) dans le trou prévu

à cet effet sur l’appareil. Tournez l’attache jusqu’à LOCK, comme indiqué sur l’appareil.

2 Pour enlever l’attache, soulevez-la doucement et tournez-la jusqu’à RELEASE.

Español

(suministrado o disponible de forma opcional)

1 Para ponerse el cinturón, encaje el broche (en la parte posterior del cinturón) en el oriﬁcio

del cinturón de cierre. Gire el cierre hasta LOCK tal y como se indica.

2 Para quitárselo, levante con cuidado el cinturón y gire hasta RELEASE tal y como se indica.

BELT CLIP

LIFT

LOCK

RELEASE

Meet Philips at the Internet

http://www.philipsusa.com

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

CAUTION

Use of controls or adjustments or performance of procedures other than

herein may result in hazardous radiation exposure or other unsafe

operation.

ATTENTION

L’utilisation de commandes ou de réglages ou l’exécution de procédures

autres que celles décrites dans le présent manuel risque

d’entraîner une exposition à un rayonnement dangereux ou d’avoir d’autres

conséquences sur la sécurité.

PRECAUCIÓN

La utilización de controles o ajustes y la realización de procedimientos

distintos de los contenidos en este manual pueden provocar la

exposición a radiaciones peligrosas y a otros peligros.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento

dependiente de dos condiciones siguientes:

1. Este aparato no puede provocar interferencia dañina, y

2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuﬁciente.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement

soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et

2. Cet appareil doit accepter toute interférence reçue, y compris les

interférences susceptibles de provoquer un fonctionement peu satisfaisant.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

NOTES

Canada

English: This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference Regulations

of the Canadian Department of Communications.

Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de Classe B prescrites dans

le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des

Communications du Canada.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Read this manual ﬁrst!

If you have any problems, do not attempt

to return this product to the store.

For fast help, call us ﬁrst!

1-800-531-0039

Return

your Warranty

Registration Card

within 10 days

Portable CD Player

AX3211, AX3212, AX3213, AX3214, AX3215

AX3216, AX3217, AX3218, AX3219, AX3220

AX3221, AX3222, AX3223, AX3224, AX3225

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown

in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol

ﬂashes, bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Normal 5 hours 6 hours

Alkaline 16 hours 20 hours

Batteries contain chemical substances, so they should be disposed

of properly.

AX32XX /17 30/10/02 11:00 Page 1

3140 115 2968.1 Printed in China

1 OPEN

HOLD➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

CLASS 1

LASER PRODUCT

English

Français

Español

English

CONTROLS / POWER SUPPLY

ONTROLS ( see ﬁgure

)

1 OPEN 2 ..............opens the CD lid

2 ∞ .......................skips and searches CD tracks backwards

3 § .......................skips and searches CD tracks forwards

4 2; ......................switches the player on, starts or pauses CD play

5 9.........................stops CD play, clears a program or switches the player off

6 DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

7 ............................display

8 MODE.................selects the different playing possibilities: shufﬂe,

shufﬂe repeat all, repeat, repeat all and SCAN

9 PROGRAM..........programs tracks and reviews the program

0 RESUME.............stores the last position of a CD track played

HOLD...................locks all buttons

OFF......................switches RESUME and HOLD off

! LINE OUT/p........3.5 mm headphone jack and LINE OUT jack to connect the

player to another audio input of an additional appliance,

remote control (not on all versions)

@ VOL E ............adjusts the volume

# 4.5V DC...............jack for external power supply

$ ............................belt clip holder

% ............................type plate

POWER SUPPLY / GENERAL INFORMATION

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1 Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the

player and to the wall outlet.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two materials: cardboard (box) and

polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, dead batteries and old equipment.

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the center pin) and the AY 3501 cassette car

adapter. Any other product may damage the set.

1 Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2 Plug the voltage converter into the

cigarette lighter jack (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input jack on the

set.

3 If necessary, clean the cigarette lighter jack to obtain a good electrical con-

tact.

4 Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5 Carefully insert the cassette adapter into the car radio’s cassette compartment.

6 Make sure the cord does not hinder your driving.

7 Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter jack-

when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal

lead to this LINE IN jack and to LINE OUT/p on the set.

CD PLAY / FEATURES

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CDhas not been

ﬁnalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

• Playback will stop if you open the CD lid.

• While the CD is read, 1 -:- ﬂashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

y is shown if the bass enhancement is

activated.

Remote control (supplied or optionally available)

Use the AY 3768 cord remote control.The buttons on the remote

control have the same functions as the corresponding buttons on the set.

1 Press 9 twice to switch off the set.

2 Firmly connect the remote control to LINE OUT/p on the set.

3 Adjust the volume VOL E on the CD player and remote control.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program.

A single track may be stored more than once in the

program.

1 While playback is stopped, select a track with

∞ or §.

2 Press PROGRAM to store the track.

yprogram lights up; the track number

programmed and P with the total number of

stored tracks are displayed.

3 Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks.

yprogram is shown and playback starts.

• You can review the program by pressing PROGRAM

for more than 2 seconds.

yThe display shows all the stored tracks in

sequence.

Notes: – If you press PROGRAM and there is no track selected, SEL is

displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9 to clear program.

yCLR is displayed once, program goes off,

and the program is cleared.

Note: The program will also be cleared if the power

supply is interrupted, or if the CD-player lid is

opened, or if the set switches off automatically.

FEATURES / TROUBLESHOOTING

RESUME and HOLD

You can interrupt playback and continue (even after an

extended period of time) from the position where

playback stopped (RESUME) and you can lock all buttons

of the set so that no action will be executed (HOLD).

Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1 Switch the slider to RESUME during playback to activate RESUME.

yresume is shown.

2 Press 9 whenever you want to stop playback.

3 Press 2; whenever you want to resume playback.

yresume is shown and playback continues

from where you have stopped.

• To deactivate RESUME, switch the slider to OFF.

yresume goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a

key is pressed, no action will be executed. This is of use, for example, when

transporting the player in a bag. With HOLD activated, you can avoid accidental

activation of other functions.

1 Switch the slider to HOLD to activate HOLD.

yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off,

hold will be shown only when 2; is pressed.

2 To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME,

you will be activating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as

this will invalidate the warranty. If a fault occurs, ﬁrst check the points listed,

before taking the unit for repair. If you are unable to solve a problem by following

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

• Check that your batteries are not dead or empty, that they are inserted

correctly, that the contact pins are clean.

• Your adapter connection may be loose. Connect it securely.

• For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

• Check that the CD is clean and correctly inserted (label-side upward).

• If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication

HOLD is on and/or there is no reaction to controls

• If HOLD is activated, then deactivate it.

• Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

• The CD is damaged or dirty. Replace or clean the CD.

• RESUME, SHUFFLE or PROGRAMis active. Switch off whichever is on.

No sound or bad sound quality.

• PAUSE might be active. Press 2;.

• Loose, wrong or dirty connections. Check and clean connections.

• Volume might not be appropriately adjusted. Adjust the volume.

• Strong magnetic ﬁelds. Check player’s position and connections. Also keep

away from active mobile phones.

• For in-car use, check that the cassette adapter is inserted correctly, that the car

cassette player’s playback direction is correct (press autoreverse to change),

and that the cigarette lighter jack is clean. Allow time for temperature change.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a

single track or the entire CD, and to play the ﬁrst few

seconds of each track.

1 Press MODE during playback as often as required in

order to activate one of the following ‘modes’. The

active mode is shown in the display.

yshufﬂe : All tracks of the CD are played in

random order until all of them have been played once.

yshufﬂe repeat all : All tracks of the CD

are played repeatedly in random order.

yrepeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The ﬁrst 10 seconds of each of the

remaining tracks are played in sequence.

2 Playback starts in the chosen mode after 2 seconds.

• To return to normal playback, press MODE repeatedly until the display shows

no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the

music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION

prevents loss of sound caused by light vibrations and shocks. Continuous playback

is ensured. However ESP does not prevent playback interruptions during vigorous

running. It also does not protect the unit against any damage caused by dropping!

On this set ESP is default on. It is possible to set ESP off and enter the Power

Save mode. The Power Save mode helps to extend battery

lifetime for longer playback.

• Press MODE for more than 2 seconds.

y disappears. power save modeis now activated.

• Press MODE again for more than 2 seconds.

y is displayed once

ESP on

➟ Power Save ➟ESP on

Selecting a track and searching

Selecting a track during playback

• Brieﬂy press ∞ or § once or several times to skip to

the current, previous or next track.

yPlayback continues with the selected track, and

the track’s number is displayed.

Selecting a track when playback is stopped

1 Brieﬂy press ∞ or § once or several times to select the desired track. The

track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to ﬁnd a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shufﬂe, shufﬂe repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

ﬂashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

CD player and CD handling

• Do not touch the lens A of the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may

damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones

• Connect the supplied headphones to the LINE OUT/p

jack of the player.

Note: LINE OUT/p can also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts

advise that continuous use at high volume can permanently damage your hearing.

Trafﬁc safety: Do not use headphones while driving a vehicle. It may create a

hazard and it is illegal in many countries. Even if your headphones are an open-air

type designed to let you hear outside sounds, do not turn up the volume so high

that you cannot hear what is going on around you.

4,5 V DC

12 V DC

CD REWRITABLE

OMPA

IBLE

program

repeat all

shuffle

resume

hold

IMPORTANT SAFETY INSTRUCTIONS

CONSIGNES DE SÉCURITÉ IMPORTANTES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves,or other apparatus (including ampliﬁers) that produce heat.

9. Only use attachments/accessories speciﬁed by the manufacturer.

10. Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

11. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as if

the power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, or when the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

12. Battery usage

CAUTION

– To prevent battery leakage which

may result in bodily injury, property damage or damage to the unit:

● Install ALL batteries correctly, + and - as marked on the unit.

● Do not mix batteries (OLD and NEW or CARBON and

ALKALINE, etc.).

● Remove batteries when the unit is not used for a long time.

EL 6474-E004: 02/8

1. Lisez ces instructions.

2. Conservez ces instructions.

3. Respectez les avertissements.

4. Suivez toutes les instructions.

5. N’utilisez pas cet appareil à proximité d’une source d’eau.

6. Nettoyez l’appareil uniquement avec un chiffon sec.

7. N’obstruez aucun oriﬁce de ventilation. Installez l’appareil

selon les instructions du fabricant.

8. N’installez pas l’appareil près d’une source de chaleur

comme par exemple des radiateurs, bouches de chaleur, cuisinières,ou

autres appareils (même des ampliﬁcateurs) dégageant de la chaleur.

9. Utilisez uniquement des accessoires ou options recommandés

par le fabricant.

10. Utilisez uniquement un meuble sur roulettes, un

support, un pied, une étagère ou une table de type recom-

mandé par le fabricant. Si vous utilisez un meuble sur

roulettes, veillez à le déplacer avec précaution aﬁn d’éviter

tout accident corporel si l’équipement se renversait.

11. Pour toute réparation, faites appel à un personnel qualiﬁé. Une

réparation sera nécessaire si l’appareil a subi des dommages tels que

détérioration du cordon d’alimentation ou de la prise, liquide renversé

sur l’appareil, ou encore si un objet est tombé dessus, si l’appareil a été

exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement

ou s’il a fait une chute.

12 .

PRÉCAUTIONd’emploi des piles

–Aﬁn d’éviter toute fuite des piles qui risquerait de causer des blessures

corporelles, des dommages matériels, ou d’endommager l’appareil :

● Installez TOUTES les piles correctement, + et - tels qu’indiqués sur

l’appareil.

● Ne mélangez pas les piles (pas de piles NEUVES avec des

USAGÉES ou de piles au CARBONE avec des ALCALINES, etc.).

● Enlevez les piles lorsque l’appareil reste inutilisé pendant une longue

période.

EL 6474-F003: 02/8

1. Lea estas instrucciones.

2. Conserve estas instrucciones.

3. Lea todos los avisos.

4. Siga todas las instrucciones.

5. No utilice este aparato cerca del agua.

6. Para limpiar el aparato utilice sólo un trapo seco.

7. No tape las aperturas de ventilación. Proceda a su

instalación de acuerdo con las instrucciones del fabricante.

8. No instale el equipo cerca de fuentes de calor – Como

radiadores, calentadores,estufas o cualquier otro aparato (incluyendo

los ampliﬁcadores) generador de calor.

9. Utilice exclusivamente aquellos dispositivos/

accesorios recomendados por el fabricante.

10. Coloque el equipo exclusivamente sobre aquellos

carros, bases,trípodes,soportes o mesas especiﬁcados por

el comerciante o vendidos con el equipo.Cuando utilice un

carro, tenga cuidado al desplazar el conjunto carro/equipo

para evitar posibles daños por vuelco.

11.

Confíe el mantenimiento y las reparaciones a personal técnico

especializado.El equipo deberá repararse siempre que haya resultado

dañado de alguna manera, como por ejemplo por daños en el cable o en

la clavija,por derrame de líquido sobre el equipo,por objetos que

hubieran podido introducirse en su interior, por exposición del equipo a la

lluvia o a ambientes húmedos, cuando el equipo no funcione con

normalidad o cuando hubiera sufrido algún tipo de caída.

12 .

Uso de las pilas – ADVERTENCIA:

Para prevenir escapes en las pilas, que pueden ocasionar

lesiones físicas, daños a su propiedad o dañar la unidad:

● Instale TODAS las pilas correctamente, + y - como está marcado en

la unidad.

● No mezcle las pilas (VIEJAS con NUEVAS o DE CARBONO y

ALCALINAS, etc.).

● Extraiga las pilas cuando no vaya a usar la unidad durante largo tiempo.

EL 6474-S003: 02/8

Return your Warranty Registration card today to

ensure you receive all the benefits you’re entitled to.

• Once your Philips purchase is regis-

tered,you’re eligible to receive all the

privileges of owning a Philips product.

• So complete and return the Warranty

Registration Card enclosed with your

purchase at once, and take advantage

of these important benefits.

Warranty

Verification

Registering your product

within 10 days confirms

your right to maximum

protection under the

terms and conditions of

your Philips warranty.

Owner

Confirmation

Your completed

Warranty Registration

Card serves as verifica-

tion of ownership in the

event of product theft

or loss.

Model

Registration

Returning your Warranty

Registration Card right

away guarantees you’ll

receive all the information

and special offers which

you qualify for as the

owner of your model.

This “bolt of lightning”

indicates uninsulated material

within your unit may cause an

electrical shock.For the safety of

everyone in your household,please

do not remove product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed litera-

ture closely to prevent operating and

maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO RAIN

OR MOISTURE.

CAUTION: To prevent electric

shock,match wide blade of plug to

wide slot,and fully insert.

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.Retain

this information for future reference.

Model No. _____________________

Serial No. ______________________

Know these

safety

symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

MAC5097

PORTABLE COMPACT DISC

One Year Free Exchange

This product must be carried in for an exchange.

LIMITED WARRANTY

WHO IS COVERED?

You must have proof of purchase to exchange the product.A sales receipt or other doc-

ument showing that you purchased the product is considered proof of purchase.Attach it

to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product.For one year thereafter,a

defective or inoperative product will be replaced with a new,renewed or comparable

product at no charge to you.A replacement product is covered only for the original war-

ranty period.When the warranty on the original product expires,the warranty on the

replacement product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product,adjustment of customer controls

on the product,and installation or repair of antenna systems outside of the product.

• product repair and/or part replacement because of misuse,accident,unauthorized repair

or other cause not within the control of Philips.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed,manufactured,approved and/or

authorized,or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product.(Some states do not

allow the exclusion of incidental or consequential damages,so the above exclusion may

not apply to you.This includes, but is not limited to, prerecorded material,whether

copyrighted or not copyrighted.)

• a product that is used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed

by Philips.In countries where Philips does not distribute the product,the local Philips

service organization will attempt to provide a replacement product (although there may

be a delay if the appropriate product is not readily available).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967E007 / 8-02

BEFORE REQUESTING EXCHANGE...

Please check your owner's manual for assistance.If you have additional questions, call us

at 1-800-531-0039.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS...

Contact 1-800-531-0039 to arrange an exchange. Or, ship the product, insured and

freight prepaid,and with proof of purchase enclosed,to the address listed below.

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A.,Puerto Rico,and U.S.Virgin Islands, all implied warranties,including implied war-

ranties of merchantability and fitness for a particular purpose,are limited in duration to

the duration of this express warranty.But,because some states do not allow limitations

on how long an implied warranty may last,this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA...

Please contact Philips at:

1-800-661-6162 (French Speaking)

1-800-531-0039 (English or Spanish Speaking)

(In Canada,this warranty is given in lieu of all other warranties.No other warranties are

expressed or implied,including any implied warranties of merchantability or fitness for a

particular purpose. Philips is not liable under any circumstances for any direct,indirect,

special,incidental or consequential damages,howsoever incurred,even if notified of the

possibility of such damages.)

REMEMBER...

Please record below the model and serial numbers found on the product.Also,please fill

out and mail your warranty registration card promptly.It will be easier for us to notify

you if necessary.

MODEL # ____________________________________

SERIAL # ____________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/pro

vince

Renvoyez votre carte d’enregistrement de garantie pour vous

assurer de recevoir tous les avantages auxquels vous avez droit.

• Dès que l’achat de votre appareil

Philips est enregistré,vous avez droit à

tous les avantages dont bénéficient les

possesseurs des produits Philips.

• Remplissez et renvoyez votre carte

d’enregistrement de garantie jointe à

votre appareil sans tarder et vous béné-

ficierez de ces avantages importants.

Vérification

de garantie

Enregistrez votre pro-

duit dans les 10 jours

pour confirmer votre

droit à une protection

maximum selon les

termes et les conditions

de votre garantie Philips.

Confirmation

de possession

Votre carte d’enreg-

istrement de garantie

prouve que vous pos-

sédez l’appareil en cas

de vol ou de perte du

produit.

Enregistrement

du modèle

Renvoyez votre carte

d’enregistrement de

garantie dès aujourd’hui

pour vous assurer de

recevoir toutes les

informations,les offres et

les bonus auxquels vous

avez droit en tant que

possesseur de ce modèle.

Cet «éclair à pointe de flèche»

indique qu’un matériau non isolé,

situé à l’intérieur de l’unité, risque de

provoquer un choc électrique. Pour la

sécurité de chacun, nous vous prions de

ne pas retirer le boîtier de ce produit.

Le «point d’exclamation» attire

votre attention sur des sujets

risquant de provoquer des problèmes de

fonctionnement et d’entretien si vous ne

lisez pas les informations s’y reportant.

DANGER :

NE PAS EXPOSER CET

ÉQUIPEMENT A LA PLUIE NI A UNE

HUMIDITÉ EXCESSIVE POUR ÉVITER LES

RISQUES D’INCENDIE ET DE CHOC

ÉLECTRIQUE.

ATTENTION : Pour éviter les

chocs électriques, introduire la lame la

plus large de la fiche dans la borne

correspondante de la prise et pousser

jusqu’au fond.

Cet espace vous est réservé

Inscrivez ci-dessous le numéro de série

situé à l’arrière du bloc.Conservez cette

information pour vous y reporter à l’avenir.

N° de modèle __________________

N° de série ____________________

Connaissez ces

symboles de

sécurite

ATTENTION

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

ATTENTION: POUR REDUIRE LE RESQUE DE CHOC ELECTRIQUE, NE PAS ENLEVER

LE COUVERCLE (NI LE PANNEAU ARRIERE). CET APPAREIL NE COMPORTE AUCUNE

PIECE POUVANT TRE REPAREE PAR L’UTILISATEUR. CONFIER SON ENTRETIEN A

UN TECHNICIEN QUALIFIE.

MAC5097

Envie hoy su Tarjeta de Registro de la Garantía

para recibir todas las ventajas correspondientes.

• Una vez que se registre la compra de

su aparato Philips, Ud.tiene derecho a

todas las ventajas correspondientes al

dueño de un producto Philips.

• Sírvase llenar y devolver en seguida

laTarjeta de Registro de la Garantía

empacada con su aparato y saque

provecho de estas ventajas importantes.

Verificación

de la garantía

Registre su producto

dentro de 10días para

confirmar su derecho a

máxima protección

bajo los términos y

condiciones de la garan-

tía de Philips.

Confirmación

del dueño

Su Tarjeta de Registro

de la Garantía comprue-

ba que Ud.es el dueño

del aparato en caso de

robo o pérdida del pro-

ducto.

Registro

del modelo

La devolución inmediata

de su Tarjeta de Registro

de la Garantía le garantiza

que recibirá toda la infor-

mación y todas las pro-

mociones especiales que

le corresponden por ser

el dueño de su modelo.

El símbolo del «rayo» indica que

algún material no aislado dentro

de su unidad podría resultar en una

sacudida eléctrica.Para la seguridad de

todos,favor de no remover la cubierta

del producto.

El «signo de exclamación» le llama

la atención a características sobre

las que Ud.debe leer la información

adjunta detenidamente para evitar proble-

mas de funcionamiento y mantenimiento.

ADVERTENCIA: PARA

EVITAR EL RIESGO DE SACUDIDA

ELECTRICA O INCENDIO,NO

EXPONGA ESTE EQUIPO A LLUVIA

NI A HUMEDAD.

PRECAUCION: Para evitar

sacudida eléctrica,introduzca la patilla

ancha del enchufe al fondo de la ranura

ancha.

Para uso del cliente:

Escriba abajo el número de serie que se

encuentra en el panel posterior.

Guarde esta información para el futuro.

No.de modelo _________________

No.de serie ____________________

Conozca estos

simbolos de

seguridad

MAC5097

PRECAUCION

RIESGO DE SACUDIDA ELECTRICA

NO ABRIR

PRECAUCION: PARA REDUCIR EL RIESGO DE SACUDIDA ELECTRICA,NO RETIRE

LA CUBIERTA (NI EL PANEL POSTERIOR). ESTE APARATONO CONTIENE NINGUNA

PARTE QUE PUEDA SER REPARADA POREL USARIO. DE SER NECESARIO ALGUN

SERVICIO O REPARACIONDEL APARATO, LLEVELO UN TECNICO CALIFICADO.

BELT CLIP CLIP CEINTURE CINTURÓN DE CIERRE

English

(supplied or optionally available)

1 To attach the belt clip to the CD player, position the shaped grip (found on the back of

the belt grip) so that it ﬁts into the belt clip hole of the CD player. Turn the clip to

LOCK as indicated on the CD player.

2 To detach, gently lift the belt clip and turn to RELEASE as indicated on the CD player.

Français

(fourni ou en option)

1 Pour ﬁxer le clip ceinture, placez l’attache (située sur le dos du clip) dans le trou prévu

à cet effet sur l’appareil. Tournez l’attache jusqu’à LOCK, comme indiqué sur l’appareil.

2 Pour enlever l’attache, soulevez-la doucement et tournez-la jusqu’à RELEASE.

Español

(suministrado o disponible de forma opcional)

1 Para ponerse el cinturón, encaje el broche (en la parte posterior del cinturón) en el oriﬁcio

del cinturón de cierre. Gire el cierre hasta LOCK tal y como se indica.

2 Para quitárselo, levante con cuidado el cinturón y gire hasta RELEASE tal y como se indica.

BELT CLIP

LIFT

LOCK

RELEASE

Meet Philips at the Internet

http://www.philipsusa.com

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

CAUTION

Use of controls or adjustments or performance of procedures other than

herein may result in hazardous radiation exposure or other unsafe

operation.

ATTENTION

L’utilisation de commandes ou de réglages ou l’exécution de procédures

autres que celles décrites dans le présent manuel risque

d’entraîner une exposition à un rayonnement dangereux ou d’avoir d’autres

conséquences sur la sécurité.

PRECAUCIÓN

La utilización de controles o ajustes y la realización de procedimientos

distintos de los contenidos en este manual pueden provocar la

exposición a radiaciones peligrosas y a otros peligros.

El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento

dependiente de dos condiciones siguientes:

1. Este aparato no puede provocar interferencia dañina, y

2. Este aparato debe aceptar cualquier interferencia recibida, incluyendo las

interferencias que pueden provocar un funcionamiento insuﬁciente.

L’appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement

soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas provoquer d’interférences nuisibles, et

2. Cet appareil doit accepter toute interférence reçue, y compris les

interférences susceptibles de provoquer un fonctionement peu satisfaisant.

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference

that may cause undesired operation.

NOTES

Canada

English: This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference Regulations

of the Canadian Department of Communications.

Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépas-

sant les limites applicables aux appareils numériques de Classe B prescrites dans

le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des

Communications du Canada.

PHILIPS CONSUMER ELECTRONICS NORTH AMERICA

Knoxville, Tennessee 37914-1810, U.S.A.

Audio

Read this manual ﬁrst!

If you have any problems, do not attempt

to return this product to the store.

For fast help, call us ﬁrst!

1-800-531-0039

Return

your Warranty

Registration Card

within 10 days

Portable CD Player

AX3211, AX3212, AX3213, AX3214, AX3215

AX3216, AX3217, AX3218, AX3219, AX3220

AX3221, AX3222, AX3223, AX3224, AX3225

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

• normal batteries type LR6, UM3 or AA (preferably Philips), or

• alkaline batteries type LR6, UM3 or AA (preferably Philips).

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting batteries

1 Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown

in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are dead or empty, the symbol

ﬂashes, bAtt is displayed, and the beep tone sounds repeatedly.

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Normal 5 hours 6 hours

Alkaline 16 hours 20 hours

Batteries contain chemical substances, so they should be disposed

of properly.

AX32XX /17 30/10/02 11:00 Page 1

1 OPEN

➟

OFF

PLA

7 VOLUME

LR6

UM3

!!!

•

QUICK START MISE EN SERVICE RAPIDE ENCENDIDO RAPIDO

NOTES

EL4967F006 / 8-02

AVANT DE DEMANDER UNE ÉCHANGE…

Veuillez consulter votre guide d'utilisation pour assistance.Si vous avez d'autres questions,

contactez-nous au 1-800-531-0039.

POUR BÉNÉFICIER DE L’ÉCHANGE GARANTIE AUX É.-U.,

AU PUERTO RICO OU DANS LES ÎLES VIERGES AMÉRICAINES…

Contactez 1-800-531-0039 pour organiser un échange. Ou bien, renvoyer le produit,frêt

et assurances payés,avec preuve d’achat incluse, à l’adresse ci-dessous :

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(Aux É.-U.,au Puerto Rico et aux Îles Vierges,toute garantie implicite,y compris des garanties

de vendabilité et d’aptitude à un but spécifique,est limitée à la durée de cette garantie

explicite.Mais,étant donné que certains états et provinces ne permettent pas de limité la

durée d’une garantie implicite,cette limitation pourrait ne pas s’appliquer au cas présent.)

POUR BÉNÉFICIER D’UNE ÉCHANGE GARANTIE AU CANADA…

Veuillez contacter Philips au :

1-800-661-6162 (Francophone)

1-800-531-0039 (Anglophone ou hispanophone)

(Au Canada,cette garantie est consentie à la place de toute autre garantie.Aucune autre

garantie n’est donnée,qu’elle soit explicite ou implicite, y compris une garantie implicite de

vendabilité ou d’aptitude à un but spécifique.Philips n’est pas,en aucun cas,responsable des

dommages,qu’ils soit directs ou indirects,spéciaux, secondaires ou conséquents, quels que

soient leurs origines,même en présence d’une notification de la possibilité de tels dommages.)

RAPPEL IMPORTANT...

Veuillez inscrire ci-dessous les numéros de modèle et de série qui se trouvent sur le pro-

duit même. De plus, veuillez remplir et renvoyer sans délai la carte d’enregistrement de

garantie. Il nous sera ainsi plus facile de vous contacter en cas de besoin.

Nº DE MODÈLE ________________________________

Nº DE SÉRIE ________________________________

Cette garantie vous donne des droits légaux spécifiques et vous pourriez

avoir d’autres droits qui varient d’état en état et de province en pro

vince

LECTEUR À DISQUE COMPACT PORTABLE

Échange gratuite pendant un an

Il faut porter ce produit à un centre de service pour l’échanger.

GARANTIE LIMITÉE

QUI EST COUVERT ?

Il faudra présenter une preuve d’achat pour pouvoir bénéficier des services de la

garantie. Le reçu,la facture ou un autre document portant la date d’achat qui prouve que

vous avez bien acheté le produit est considéré comme preuve d’achat.L’attacher à ce

manuel d’emploi et les garder tous les deux à portée de main.

QU’EST-CE QUI EST COUVERT ?

La couverture de la garantie entre en vigueur le jour où vous achetez le produit.Pendant

un an à compter de cette date, tout produit défectueux ou qui ne fonctionne pas sera

remplacé par un produit neuf,renouvelé ou un produit comparable sans frais aucun au

consommateur. Un produit de remplacement n’est couvert que pendant la période non-

écoulée de garantie d’origine. Lorsque la garantie du produit d’origine vient à terme, la

garantie du produit de remplacement est terminée aussi.

QU’EST-CE QUI EST EXCLU DE LA GARANTIE ?

La garantie ne couvre pas :

• les frais de main d’œuvre pour installer ou préparer,pour régler les commandes et

pour installer ou réparer les systèmes d’antenne à l’extérieur du produit.

• la réparation du produit et/ou d’une pièce pour cause du mauvais emploi,d’accident,

de réparations non-agréées ou d’une autre raison qui ne peut pas être contrôlée par

Philips.

• des problèmes de réception dûs à des conditions de signal, au câble ou aux systèmes

d’antenne à l’extérieur de l’unité.

• un produit qui nécessite des modifications ou adaptations pour lui permettre de fonc-

tionner dans un pays autre que le pays pour lequel il a été conçu,fabriqué,agréé et/ou

autorisé,ou la réparation des produits endommagés par de telles modifications.

• des dommages indirects ou conséquents qui résultent du produit.(Certains états ou

provinces ne permettent pas l’exclusion de dommages indirects ou conséquents.Il est

donc possible que l’exclusion ci-dessus ne s’applique pas au cas présent.Cela com-

prend,mais de façon non-limitative,des enregistrements,qu’ils soient protégés ou non

par les lois sur les droits d’auteur).

•

un produit utilisé pour des raisons commerciales ou institutionnelles.

OÙ L’ÉCHANGE EST-ELLE PROPOSÉE ?

Le produit pourra s’échanger dans tous les pays où le produit est distribué officiellement

par Philips.Dans des pays où Philips ne distribue pas le produit,l’organisme local de service

Philips tentera de fournir un produit de remplacement (mais il pourra y avoir des retards si

le bon produit n’est pas facilement disponible).

Philips, P.O. Box 520890,Miami,

FL 33152, É.-U.,

(402) 536-4171

TOCADISCOS DE CD PORTATIL

Cambio gratis por un año

Se necesita presentarse en persona con este producto para cambiarlo.

GARANTIA LIMITADA

¿QUIEN TIENE PROTECCION?

Usted debe tener su comprobante de venta para cambiar el producto. Una nota de venta

u otro documento mostrando que usted compró el producto se considera un compro-

bante de venta.Adjúntelo a este manual de instrucciones y reténgalo a la mano.

¿QUE CUBRE?

La protección bajo la garantía comienza el mismo día en que usted compra el producto.

Durante un año a partir de esta fecha, se reemplazará un producto inoperante o defectuoso

con otro nuevo, renovado o comparable sin cargo alguno.Un producto de reemplazo tiene

cobertura sólo durante el período de la garantía original. Una vez que venza la garantía origi-

nal del producto,también habrá vencido la garantía del producto de reemplazo.

¿QUE EXCLUYE LA GARANTIA?

Su garantía no cubre:

• cobros por mano de obra durante la instalación o montaje del producto,ajuste de los

controles del cliente o de preferencia e instalación o reparación de los sistemas con

antena fuera de la unidad.

•

reparación del producto y/o reemplazo de piezas,a raíz de uso indebido,accidente,reparación

no autorizada u otra causa no bajo el control de Philips.

• problemas de recepción ocasionados por condiciones de señales o sistemas de cable o

de antena fuera de la unidad.

• un producto que requiera modificación o adaptación para que opere en un país que no

sea el país para el que fue concebido,fabricado,aprobado y/o autorizado,o la

reparación de productos dañados por tales modificaciones.

• daños incidentales o consecuentes que resulten del producto.(Algunos estados no

permiten la exclusión por daños incidentales o consecuentes,de modo que es posible

que la exclusión arriba indicada no le sea aplicable a usted.Esto incluye,sin limitarse,

materiales pregrabados con o sin amparo de derechos de autor.)

• una unidad que se ha usado para fines comerciales o institucionales.

¿DONDE SE EFECTUA EL CAMBIO?

Usted puede cambiar el producto en todos los países con distribución oficial del producto

por Philips.En países donde Philips no distribuye el producto, la entidad local de servicio

Philips tratará de darle un producto de reemplazo (aunque puede haber demora si el

producto apropiado no está fácilmente disponible).

Philips, P.O. Box 520890,Miami,

FL 33152, USA,

(402) 536-4171

EL4967S006 / 8-02

ANTES DE PEDIR UN CAMBIO…

Por favor,consulte su manual del usuario si necesita ayuda.Si tiene más preguntas,llámenos

al 1-800-531-0039.

PARA CAMBIAR UN PRODUCTO EN LOS EE.UU.,

PUERTO RICO O LAS ISLAS VIRGENES…

Contacte con el 1-800-531-0039 para concertar un cambio.También, usted puede enviar

el producto con el seguro y transporte o franqueo prepagados,adjuntando el compro-

bante de venta y enviándolo a la dirección a continuación:

Philips Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(En los EE.UU.,Puerto Rico o las Islas Vírgenes, toda garantía implícita, inclusive las garan-

tías implícitas de comerciabilidad y aptitud para un propósito en particular, están limitadas

en cuanto a duración al plazo de esta garantía expresa.Puesto que algunos estados no

permiten limitaciones sobre la duración de una garantía implícita,es posible que la limi-

tación arriba indicada no le sea aplicable a usted.)

PARA CAMBIAR UN PRODUCTO EN EL CANADA…

Favor de comunicarse con Philips al:

1-800-661-6162 (francófono)

1-800-531-0039 (anglófono o hispanohablante)

(En el Canadá,esta garantía es otorgada en lugar de toda otra garantía.No se otorga

ninguna otra garantía expresa ni implícita,comprendiéndose aquí ninguna garantía implíci-

ta de comerciabilidad o aptitud para propósito alguno.Philips no será responsable bajo

circunstancia alguna por daños y perjuicios directos,indirectos, especiales, incidentales o

consecuentes,independientemente de la manera ocasionada,aún con notificación de la

posibilidad de los mismos.)

RECUERDE…

Favor de anotar los números de modelo y serie del producto en el espacio abajo.

También,sírvase llenar y enviar oportunamente su tarjeta de registro de la garantía.Así

nos será más fácil notificarle en caso de ser necesario.

Modelo No. ____________________________________

Serie No. ____________________________________

Esta garantía le otorga derechos legales específicos y usted podría

gozar de otros derechos que varían de un estado a otr

CARACTERISTIQUES / PANNEST ET REMEDES

RESUME et HOLD

Vous pouvez interrompre la lecture et la reprendre (même

après une longue pause) à l’endroit où elle a été arrêtée

(RESUME), et vous pouvez bloquer tous les boutons de

l’appareil aﬁn d’empêcher toute action (HOLD). Utilisez la

glissière RESUME–HOLD–OFF pour ces fonctions.

RESUME – reprend à partir de l’endroit où vous

avez arrêté

1 Pendant la lecture, faites glisser le commutateur en position RESUME pour

activer la fonction RESUME.

yresume apparaît.

2 Appuyez sur 9 lorsque vous souhaitez arrêter la lecture.

3 Appuyez sur 2; lorsque vous souhaitez reprendre la lecture.

yresume est afﬁchée et la lecture reprend à

partir de l’endroit où vous l’aviez arrêtée.

• Pour désactiver la fonction RESUME, faites glisser le

commutateur sur OFF.

yresume s’éteint.

HOLD – Blocage de toutes les touches

Vous pouvez bloquer les boutons de l’appareil en plaçant la glissière sur HOLD.

Aucune action n’est alors exécutée quand on appuie sur un bouton. Ceci est utile

quand vous transportez le lecteur dans un sac, par exemple. Quand HOLD est

actif, vous évitez d’activer accidentellement d’autres fonctions.

1 Faites glisser le commutateur sur HOLD pour activer la fonction HOLD.

yToutes les touches sont bloquées. HoLd est

afﬁchée dès que vous appuyez sur une touche. Si

l’appareil est éteint, hold n’apparaît que si vous

appuyez sur 2;.

2 Pour désactiver la fonction HOLD, faites glisser le

commutateur sur OFF.

Remarque : Si vous désactivez la fonction HOLD en

amenant le commutateur sur RESUME et que vous remettez l'appareil

en marche, la lecture reprend là où vous l’aviez arrêtée.

resume

hold

Pannes et remedes

AVERTISSEMENT :

N’essayez en aucun cas de réparer l’appareil vous-même,

sous peine d’invalider la garantie. Dans le cas d’une anomalie de fonctionnement,

commencez par vériﬁer les points ci-dessous avant de donner votre appareil à

réparer. Si vous ne parvenez pas à résoudre le problème en suivant ces

instructions, veuillez consulter votre fournisseur ou votre centre SAV.

Pas d'alimentation au lecteur de CD, ou la lecture ne démarre pas

• Contrôlez si les piles ne sont pas usées ou vides, si elles sont insérées correctement,

si les bornes de contact ne sont pas sales.

• La connexion de l'adaptateur est lâche. Connectez bien l'adaptateur.

• Lors de l'utilisation en voiture, contrôlez si le contact de la voiture est mis. Veuillez

aussi contrôler les piles du lecteur.

L'afﬁchage indique no diSC

• Contrôlez si le CD n'est pas contaminé et si il est inséré correctement (la face

imprimée orientée vers le haut).

• Si la lentille est embuée, attendez quelques minutes pour que l'embouage de la

lentille ait disparu.

L'afﬁchage indique nF diSC

• Le CD-RW (CD-R) n'est pas enregistré correctement. Utilisez FINALIZE sur votre

enregistreur CD.

Si l'afﬁchage indique HOLD et/ou aucune des touches ne réagit

• Si HOLD est activé, désactivez la fonction.

• Décharge électrostatique. Débranchez l'appareil ou enlevez les piles pendant

quelques secondes.

Le CD saute des plages

• Le CD est endommagé ou contaminé. Remplacez ou nettoyez le CD.

• RESUME, SHUFFLE ou PROGRAM est activé. Désactivez chacune des fonctions.

Absence de son ou mauvaise qualité de son

• Le mode de pause (PAUSE) peut être activé. Appuyez sur 2;.

• Connexions lâches, incorrectes ou sales. Contrôlez et nettoyez les connexions.

• Le volume peut être réglé trop bas. Réglez le volume.

• Puissant champ magnétique. Contrôlez la position et les connexions du lecteur.

Eloignez l'appareil des téléphones mobiles.

• Lors de l'utilisation en voiture, contrôlez si la cassette adaptatrice est insérée cor-

rectement, si sens de lecture du lecteur de cassettes de votre autoradio est correct

(appuyez sur autoreverse pour changer) et si la prise de l'allume-cigares n'est pas

sale. Attendez que l'appareil soit acclimaté.

CARACTERISTIQUES

Programmation des numéros de pistes

Vous pouvez enregistrer jusqu’à 30 pistes dans un.

programme. Une piste peut être enregistrée plusieurs

fois dans un programme.

1 Lorsque la lecture est arrêtée, sélectionnez une piste

à l’aide de ∞ ou §.

2 Appuyez sur PROGRAM pour mémoriser la piste.

y program s’allume; le numéro de la piste

programmée, le symbole P et le nombre total de pistes programmées

sont afﬁchés.

3 Sélectionnez et mémorisez de la même manière

toutes les pistes voulues.

4 Appuyez sur 2; pour démarrer le lecteur des pistes

que vous avez choisies.

yprogram apparaît et la lecture débute.

• Vous pouvez passer votre programme en revue en

appuyant pendant plus de 2 secondes sur PROGRAM.

yL’afﬁchage présente toutes les pistes

mémorisées dans l’ordre.

Remarques : – Si vous appuyez sur PROGRAM sans qu’aucune piste ne soit

sélectionnée, l’indication SEL apparaît.

– Si vous essayez de mémoriser plus de 30 pistes, l’indication

FULLapparaît.

Effacer le programme

• Quand la lecture est à l’arrêt, appuyez sur 9 pour

effacer le programme.

yCLR apparaît une fois, program s’éteint et

le programme est effacé.

Remarque : Le programme s’efface également si l’alimentation est coupée, si

le couvercle du CD est ouvert ou quand l’appareil s’éteint

automatiquement.

program

Sélection des différentes possibilités de lecture – MODE

Il est possible de jouer les morceaux dans un ordre aléatoire, de rejouer une piste ou

d’écouter les premières secondes de chaque piste.

1 Pendant la lecture, appuyez sur MODE autant de fois

que nécessaire pour activer un des modes suivants. Le

mode actif apparaît à l’afﬁchage.

yshufﬂe : Toutes les pistes du CD sont lues

dans un ordre aléatoire, jusqu’à ce que chacune

ait été lue une fois.

yshufﬂe repeat all : Toutes les pistes du CD

sont lues plusieurs fois dans un ordre aléatoire.

yrepeat : La piste en cours de lecture est jouée

de façon répétée.

yrepeat all : L’ensemble du CD est joué de

façon répétée.

ySCAN : Les 10 premières secondes des pistes

restantes sont lues dans l’ordre.

2 La lecture démarre dans le mode choisi après 2 secondes.

• Pour revenir à la lecture normale, appuyez sur MODE à plusieurs reprises

jusqu’à que l’indication disparaisse.

ESP / Mode d'économie d'énergie

Les lecteurs de CD portables classiques sautent souvent des parties du CD quand ils

sont soumis à des chocs ou à des vibrations. La fonction ELECTRONIC SKIP

PROTECTION(ESP), dont votre appareil est équipé, évite la perte de continuité quand il

s’agit de légères vibrations. Mais ESP n’évite pas les interruptions de lecture dues à un

entraînement sportif intensif. Il n’évite pas non plus les dommages si le lecteur tombe !

Sur cet appareil ESP est activé par défaut. Il est possible de désactiver ESP et

d'entrer en mode d'économie d'énergie. Le mode d'économie d'énergie permet de pro-

longer la durée de vie des piles pour plus d'heures de lecture.

• Maintenez enfoncé MODE pendant plus de 2 secondes.

y disparaît. Économie d'énergie activé

• Maintenez à nouveau enfoncé MODE pendant plus de 2 secondes.

y est afﬁché une fois.

ESP activé

➟Économie d'énergie ➟ESP activé

repeat all

shuffle

Sélection d’une piste et recherche

Sélection d’une piste en cours de lecture

• Appuyez brièvement une ou plusieurs fois sur ∞ ou

sur § pour aller au début de la piste en cours ou à la

piste précédente ou suivante.

yLa lecture se poursuit avec la piste sélectionnée,

dont le numéro s’afﬁche.

Sélection d’une piste lorsque la lecture est arrêtée

1 Appuyez brièvement une ou plusieurs fois sur ∞ ou sur §.

yLe numéro de la piste sélectionnée est afﬁché.

2 Appuyez sur 2; pour lancer la lecture du CD.

yLa lecture débute à la piste sélectionnée.

Recherche d’un passage en cours de lecture

1 Maintenez ∞ ou § enfoncé pour trouver un passage

donné vers l’avant ou vers l’arrière.

yLa recherche débute et la lecture se poursuit avec

un volume inférieur. La recherche s’accélère après

2 secondes.

2 Relâchez la touche lorsque vous avez atteint le passage voulu.

yLa lecture normale reprend à partir de cette position.

Remarques : – Si le lecteur est en mode SCAN (voir chapitre MODE), la

recherche n’est pas possible.

– En mode shufﬂe, shufﬂe repeat all ou repeat mode (voir chapitre

MODE) ou bien pendant la lecture d'un programme, la recherche

n’est possible que pour la piste en lecture.

LECTURE CD / CARACTERISTIQUES

Informations relatives à la lecture

• Si un CD enregistrable (CD-R) ou réenregistrable (CD-RW) n’est pas enregistré

correctement, l’indication nF dISC est afﬁchée. Dans ce cas, utilisez la

fonction FINALIZE de votre graveur de CD pour terminer l’enregistrement.

• Si vous souhaitez lire un CD réenregistrable (CD-RW), il faut entre

3–15 secondes pour que la lecture démarre après avoir appuyé sur 2;.

• La lecture s’arrête si vous ouvrez le couvercle du CD.

• 1 -:- clignote à l’afﬁchage pendant tout le temps de la lecture du CD.

Volume et basses

Réglage du volume

• Réglez le volume au moyen de VOL E.

Réglage des basses

• Appuyez sur DBB pour activer ou désactiver

l’accentuation des basses.

y est afﬁché si l’accentuation des basses

est activée.

Télécommande (fournie ou disponible séparément)

Utilisez la télécommande avec ﬁl AY 3768. Les boutons sur la

télécommande ont les mêmes fonctions que les boutons correspondants qui

se trouvent sur l'appareil.

1 Appuyez deux fois sur 9 pour éteindre l'appareil.

2 Raccordez fermement la télécommande à LINE OUT/p sur l'appareil.

3 Réglez le volume avec VOL E sur le lecteur de CD et sur la télécommande.

INFORMATIONS GENERALES / LECTURE CD

Utilisation en voiture (connecteurs fournis ou en option)

N'utilisez que le convertisseur de tension pour autoradio AY 3545 (4822 219 10033)

ou AY 3548 (3140 118 71890) (4,5 V courant continu, pôle positif sur la broche

centrale) et la cassette-adaptatrice pour autoradio AY 3501. Tout autre produit

risque d'endommager l'appareil.

1 Placez l'appareil sur une surface horizontale,

exempte de vibrations et stable. Assurez-vous

que c'est un endroit sûr où l'appareil ne

représente aucun danger et où il n'est pas un

obstacle pour le conducteur et les passagers.

2 Introduisez le transformateur pour voiture dans

la prise de l'allume-cigare (seulement pour

une batterie de voiture de 12 V, mise à

terre négative) puis connectez l'embout du

câble au jack d'entrée 4.5V DC sur l'appareil.

3 Si nécessaire, nettoyez la prise de l'allume-

cigare pour obtenir un bon contact électrique.

4 Réglez le volume bas et branchez la ﬁche de la cassette-adaptatrice

à LINE OUT/p de l'appareil.

5 Introduisez la cassette-adaptatrice avec précaution dans le compartiment

pour cassettes de l'autoradio.

6 Assurez-vous que le cordon ne vous gêne pas pour conduire.

7 Pour baisser le volume sur l'appareil, si nécessaire. Lancez la lecture sur

l'appareil et réglez le son avec les commandes de l'autoradio.

• Veillez à toujours ôter le convertisseur de tension de la prise de

l'allume-cigare quand l'appareil n'est pas en service.

Remarque : Si votre autoradio possède une prise LINE IN, il est préférable

de l'utiliser pour le branchement à l'autoradio plutôt que la cassette-

adaptatrice. Branchez la ligne de signal à cette prise LINE IN et à

LINE OUT/p sur l'appareil.

4,5 V DC

12 V DC

EWRIT

Lecture d’un CD

Ce lecteur CD peut lire tous les types de disques

audio comme les CD enregistrables ou réenregistrables.

N’essayez pas de lire un CD-ROM, un CDi, un CDV, un

DVD ou un CD d’ordinateur.

Appuyez sur la glissière OPEN 2 pour ouvrir le lecteur.

Insérez un CD audio, face imprimée vers le haut, en

appuyant sur le CD pour le ﬁxer sur l’axe de l’appareil.

3 Fermez le lecteur en appuyant sur le couvercle.

4 Appuyez sur 2; pour mettre le lecteur en marche et

démarrer la lecture.

yLe numéro de la piste en cours de lecture et le

temps écoulé sont afﬁchés.

• Vous pouvez interrompre la lecture en appuyant sur 2;.

yL’afﬁchage du temps de lecture clignote.

• Reprenez la lecture en appuyant une nouvelle fois

sur 2;.

5 Appuyez sur 9 pour arrêter la lecture.

yLe nombre total de pistes et la durée totale de

lecture du CD sont afﬁchés.

6 Appuyez une nouvelle fois sur 9 pour éteindre

l’appareil.

• Pour retirer le CD, saisissez-le par le bord et appuyez

doucement sur l’axe tout en soulevant le CD.

Remarque : Le lecteur s’éteint automatiquement après

un certain temps s’il n'est pas utilisé, de

manière à économiser l’énergie.

Lecteur de CD et manipulation des CD

• Ne touchez jamais la lentille A du lecteur de CD.

• N’exposez jamais l’appareil, les piles ou les CD à

l’humidité, à la pluie ou à une chaleur excessive

(chauffage ou lumière directe du soleil).

• Vous pouvez nettoyer le lecteur de CD à l’aide d’un

chiffon doux, légèrement humide et non pelucheux.

N’utilisez pas de produits de nettoyage, car ils sont

susceptibles d’avoir un effet corrosif.

• Pour nettoyer un CD, essuyez-le en ligne droite du

centre vers le bord, à l’aide d’un chiffon doux non pelucheux. Les produits de

nettoyage risquent d’endommager le disque! N’inscrivez jamais rien sur un CD ou

n’y collez aucune étiquette.

• La lentille peut se couvrir de buée lorsque vous faites passer brutalement

l’appareil du froid à la chaleur. Il n’est alors plus possible de lire un CD. Laissez le

lecteur de CD dans un environnement chaud jusqu’à ce que la buée s’évapore.

• Le fonctionnement du lecteur de CD peut être perturbé si des téléphones

portables fonctionnent près de l’appareil.

• Evitez de laisser tomber l’appareil, ce qui risquerait de l’endommager.

Ecouteurs

• Branchez les écouteurs fournis sur la prise LINE OUT/p.

Note: Vous pouvez également utiliser la borne de sor-

tie LINE OUT/p pour brancher cet appareil sur votre

système Hi-Fi. Pour ajuster le son et le volume

sonore, utilisez les boutons de commande de

l’équipement audio auxiliaire et du lecteur CD.

IMPORTANT!

Sécurité d’écoute : ne réglez pas vos écouteurs à un volume trop élevé. Les experts de

l’audition signalent qu’un utilisation continue à volume élevé peut nuire à l’ouïe.

Sécurité routière : n’utilisez pas vos écouteurs lorsque vous conduisez un véhicule.

Cela peut entraîner des dangers, et est interdit dans nombre de pays. Même si vous

utilisez des écouteurs de type ouvert, conçus pour vous permettre d’entendre les sons

environnants, ne réglez pas le volume si fort que vous n’entendez plus ce qui se passe

autour de vous.

ALIMENTATION ELECTRIQUE / INFORMATIONS GENERALES

Bloc d’alimentation (fourni ou disponible en option)

N’utilisez que le bloc d’alimentation AY 3170 (4,5 V /

300 mA, courant continu, tension positive sur la borne

centrale). Tout autre appareil risque d’endommager le

lecteur.

1 Assurez-vous que la tension du réseau correspond à

celle du bloc d'alimentation.

2 Branchez le bloc d’alimentation sur la prise 4.5V DC

du lecteur et sur la prise murale.

Remarque : Débranchez toujours le bloc d’alimentation lorsque vous ne l’utilisez pas.

Informations relatives à l’environnement

• Tous les matériaux d’emballage superﬂus ont été supprimés. Nous avons fait

tout notre possible pour que l’emballage puisse être trié en deux matériaux :

carton (boîte) et polyéthylène (sachets, plaques de protection en mousse).

• Votre appareil est composé de matériaux pouvant être recyclés s’il est

démonté par une ﬁrme spécialisée. Veuillez observer les règlements locaux

lorsque vous débarrassez des matériaux d’emballage, des piles usagées et de

votre ancien appareil.

4.5

Français COMMANDES / ALIMENTATION ELECTRIQUE

COMMANDES ( voir ﬁgures 1 )

1 OPEN 2 ..............ouvre le couvercle du lecteur

2 ∞ .......................recule d’une piste sur le CD ou effectue une recherche vers

l’arrière

3 § .......................avance d’une piste sur le CD ou effectue une recherche vers

l’avant

4 2; ......................allume le lecteur, démarre ou interrompt la lecture CD

5 9.........................arrête la lecture CD, efface la programmation du CD ou

éteint le lecteur

6 DBB.....................active/désactive l’ampliﬁcation des basses. Une pression de

plus de 2 secondes sur ce bouton active/désactive le signal

sonore (le bip)

7 ............................afﬁchage

8 MODE.................sélectionne l’une des possibilités de lecture : shufﬂe,

shufﬂe repeat all, repeat, repeat all et SCAN

9 PROGRAM..........permet de programmer les pistes, afﬁche la programmation

0 RESUME.............enregistre la dernière position de lecture d’une piste de CD

HOLD...................verrouille toutes les touches

OFF......................désactive les fonctions RESUME et HOLD

! LINE OUT/p........prise pour casque de 3,5 mm, prise permettant de connecter

le lecteur à l’entrée audio d’un autre appareil, prise pour la

télécommande (pas sur tous les modèles)

@ VOL E ............règle le volume

# 4.5V DC...............prise pour alimentation extérieure

$ ............................support encastré pour le clip ceinture

% ............................identiﬁcation du modèle

Piles (fournies ou disponibles en option)

Avec ce lecteur, vous pouvez utiliser :

• des piles normales du type LR6, UM3 ou AA (de préférence Philips), ou

• des piles alcalines du type LR6, UM3 ou AA (de préférence Philips).

Remarques : – Il ne faut pas mélanger des piles usagées et neuves ou des piles

de types différents. Retirez les piles si elles sont déchargées ou

si vous n'utilisez pas le lecteur pendant un certain temps.

Mise en place des piles

1 Appuyez sur OPEN 2 pour ouvrir le couvercle du

lecteur.

2 Ouvrez le compartiment des piles et placez-y soit 2

piles normales ou alcalines.

Témoin des piles

La charge approximative restante des piles est indiquée à l’afﬁchage.

Pile pleine

Pile à deux-tiers pleine

Pile à un-tiers pleine

Pile vide. Quand les piles sont vides, clignote,

bAtt est afﬁché, et le bip se fait entendre de

façon répétée.

Durée moyenne d’utilisation des piles dans des conditions normales

Type de piles ESP activé Économie d'énergie

Normales 5 heures 6 heures

Alcalines 16 heures 20 heures

Les piles contiennent des substances chimiques et doivent par

conséquent être rejetées dans les endroits appropriés.

Solución de problemas

ADVERTENCIA: Bajo ninguna circusnstancia intente reparar el equipo Ud. mismo,

anularía la garantía. Si se produce un fallo, comprobar en primer lugar los puntos

listados a continuación antes de llevar el equipo a reparar.Si el usuario no es

capaz de resolver un problema mediante el seguimiento de estas ayudas, debe

consultar al comercio distribuidor o centro de servicio.

El reproductor de CD no tiene corriente o la reproducción no se inicia

• Compruebe que sus pilas no están agotadas, que estén colocadas correcta-

mente y que las espigas de contacto estén limpias.

• Es posible que la conexión del adaptador esté ﬂoja. Conéctela bien.

• Para utilización en el automóvil, compruebe que el motor esté encendido.

Compruebe también las pilas del reproductor.

Aparece la indicación no diSC

•

Compruebe que el CD esté limpio y colocado correctamente (con el lado de la

etiqueta hacia arriba).

• Si la lente se ha empañado, espere unos minutos a que se desempañe.

Aparece la indicación nF diSC

• El CD-RW (CD-R) no se grabó correctamente. Utilice FINALIZE en su grabadora de CD.

La indicación HOLD está encendida y /o no hay ninguna reacción a los

mandos

• Si HOLD está activada, desactívela.

• Descarga electrostática. Desconecte la corriente o retire las pilas durante unos

segundos.

El CD salta pistas

• El CD está dañado o sucio. Cambie o limpie el CD.

•

RESUME, SHUFFLE o PROGRAM está activada. Desactive la que esté activada.

No hay sonido o éste es de mala calidad.

• Es posible que el modo de pausa (PAUSE) esté activado. Pulse 2;.

• Conexiones ﬂojas, incorrectas o sucias. Compruebe las conexiones y límpielas.

• Quizás el volumen no está ajustado correctamente. Ajústelo.

• Campos magnéticos potentes. Compruebe la posición y las conexiones del

reproductor. Manténgalo también apartado de teléfonos móviles activos.

• Para utilización en el automóvil, compruebe que el adaptador de cassette esté

insertado correctamente, que la dirección de reproducción del reproductor de

cassette del automóvil sea correcta (pulse autoreverse para cambiarla), y que el

conector del encendedor de cigarrillos esté limpio. Deje pasar cierto tiempo

para que la temperatura cambie.

CARACTERISTICAS / SOLUCIÓN DE PROBLEMAS

RESUME y HOLD

Se puede interrumpir la reproducción y continuarla

(incluso tras un período largo de tiempo) en el punto en

que fue interrumpida (RESUME) y se pueden bloquear

todos los botones de modo que no se ejecute ninguna

acción (HOLD). Use el interruptor deslizante RESUME–

HOLD–OFF para estas funciones.

RESUME – continúa desde donde fue interrumpida

1 Coloque el interruptor deslizante en la posición

RESUME durante la reproducción para activar RESUME.

yAparece resume en la pantalla.

2 Pulse 9 cuando desee detener la reproducción.

3 Pulse 2; cuando desee continuar la reproducción.

yAparecer resume en la pantalla y continuará la

reproducción a partir del punto en que se detuvo.

• Para desactivar la función RESUME, cambie el

interruptor deslizante a la posición OFF.

yDesaparece resume.

HOLD – bloqueo de todos los botones

Se pueden bloquear los botones colocando el interruptor deslizante en HOLD. Si

se pulsa una tecla no se ejecutará ninguna acción. Esto es útil, p.ej. si se lleva el

reproductor en un bolso. Con HOLD activado se puede evitar la activación acci-

dental de otras funciones.

1 Coloque el interruptor deslizante en la posición HOLD

para activar esta función.

ySe bloquearán todos los botones. Aparecerá

HoLd en la pantalla cuando se pulse cualquier

tecla. Si se apaga el equipo, sólo aparecerá hold

en la pantalla al pulsar 2;.

2 Para desactivar la función HOLD, cambie el interruptor deslizante a la posición

OFF.

Nota: Al desactivar la función HOLD cambiando el interruptor deslizante a RESUME y

reiniciar, la reproducción continuará desde la posición donde se detuvo.

resume

hold

CARACTERISTICAS

Programación de números de pista

Se pueden guardar hasta 30 pistas para reproducirlas

en un programa. Una sola pista puede ser guardada

más de una vez en el programa.

1 Mientras la reproducción se encuentra detenida,

seleccione una pista mediante ∞ o §.

2 Pulse PROGRAM para guardar la pista.

yprogram se encenderá; en la pantalla

aparecerán el número de la pista programada y

P con el número total de pistas guardadas.

3 Seleccione y guarde de esta manera todas las pistas

que desee.

4 Pulse 2; para iniciar la reproducción de las pistas

seleccionadas.

yAparecerá program en la pantalla y

comenzará la reproducción.

• Puede revisar el programa pulsando PROGRAM

durante más de 2 segundos.

yAparecerán en la pantalla todas las pistas

guardadas por su orden.

Notas: – Si pulsa PROGRAM y no hay una pista seleccionada, aparecerá SEL

en la pantalla.

– Si intenta guardar más de 30 pistas, aparecerá FULL.

Borrado del programa

• Mientras la reproducción está detenida, pulse 9

para borrar el programa.

yAparecer CLR una vez en la pantalla,

desaparecer program y el programa se

borrará.

Nota: El programa también será borrado si la ali-

mentación eléctrica se interrumpe, si se abre la

tapa del CD, o

i el equipo se apaga automáticamente.

program

Selección de las distintas posibilidades de reproducción – MODE

Se pueden reproducir pistas en orden aleatorio, repetir una pista o todo el CD y

reproducir los primeros segundos de cada pista.

1 Pulse MODE durante la reproducción las veces que sean

necesarias para activar una de las siguientes funciones.

La función activa se muestra en pantalla.

yshufﬂe : Todas las pistas del CD se

reproducirán en orden aleatorio hasta que todas

ellas se hayan reproducido una vez.

yshufﬂe repeat all : Todas las pistas del

CD se reproducirán repetidamente en orden aleatorio.

yrepeat : La pista actual se reproducirá

repetidamente.

yrepeat all : Todo el CD se reproducirá

repetidamente.

ySCAN: Los primeros 10 segundos de cada pista

se reproducirán según su orden.

2 La reproducción comenzará en el modo seleccionado transcurridos 2 segundos.

• Para regresar al modo de reproducción normal, pulse MODE repetidamente

hasta que desaparezca la indicación de la pantalla.

ESP / Modo de ahorro de energía

Los CD portátiles convencionales están expuestos a que un golpe o vibración durante

la reproducción hagan saltar partes del CD. La función ELECTRONIC SKIP PROTECTION

(ESP) con la que el equipo está dotado, impide la pérdida de continuidad si el

reproductor está expuesto a ligeras vibraciones. ESP no impide las interrupciones

causadas por ejercicios bruscos. ¡Tampoco protege de daños causados por caídas!

En este aparato, ESP está activada por defecto. Es posible desactivar ESP y entrar en

el modo de ahorro de corriente. El modo de ahorro de energía ayuda a aumentar la

duración de la pila y así obtener más tiempo de reproducción.

• Pulse MODE durante más de 2 segundos.

y desaparece. Ahorro de energía activ.

• Pulse MODE durante más de 2 segundos.

y aparece una vez

ESP activ. ➟Ahorro de energía ➟ESP activ.

repeat all

shuffle

Selección de una pista y busqúeda

Selección de una pista durante la reproducción

• Pulse brevemente ∞ o § una o varias veces para

saltar a la pista actual, la anterior o la siguiente.

yLa reproducción continúa con la pista

seleccionada y su número aparece en pantalla.

Selección de una pista cuando se ha detenido la reproducción

1 Pulse brevemente ∞ o § una o varias veces.

yAparecerá en la pantalla el número de la pista seleccionada.

2 Pulse 2; para iniciar la reproducción de CD.

yLa reproducción empezar por la pista seleccionada.

Búsqueda de un pasaje durante la reproducción

1 Mantenga pulsada ∞ o § para buscar un pasaje

concreto hacia atrás o hacia delante, respectivamente.

ySe iniciará la búsqueda y la reproducción continúa

a bajo volumen. La búsqueda se acelera transcurridos

2 segundos.

2 Suelte el botón cuando llegue al pasaje que desee.

yLa reproducción normal continuará desde ese punto.

Notas: – Si el reproductor está en SCAN (consultar MODE), la búsqueda

no es posible.

– En shufﬂe, shufﬂe repeat all o repeat (consultar MODE), o

durante la reproducción de un progama, la búsqueda sólo es

posible en esa pista en concreto.

REPRODUCCIÓN DE UN CD / CARACTERISTICAS

Información acerca de las reproducciones

• Si un CD grabable (CD-R) o CD regrabable (CD-RW) no está grabado

correctamente, aparecerá nF dISC en la pantalla. En ese caso, utilice la

función FINALIZE del reproductor de CD para completar la grabación.

• Si desea reproducir un CD regrabable (CD-RW), la reproducción tardará entre

3–15 segundos después de pulsar 2;.

• La reproducción se detendrá si abre la tapa del reproductor de CD.

• 1 -:- parpadeará durante la lectura del CD.

Volumen y graves

Ajuste del volumen

• Ajuste el volumen utilizando VOL E.

Ajuste de graves

• Pulsar DBB para activar o desactivar la

intensiﬁcación de bajos.

y se muestra en pantalla si se ha activado

la intensiﬁcación de bajos.

Mando a distancia (suministrado o disponible opcionalmente)

Utilice el mando a distancia con cable AY 3768. Los botones del

mando a distancia tienen la misma función que los botones correspondientes

en el equipo.

1 Pulse 9 dos veces para desconectar el equipo.

2 Conecte ﬁrmemente el mando a distancia a LINE OUT/p en el equipo.

3 Ajuste el volumen con VOL E en el reproductor de CD y en el control

remoto.

Reproducción de un CD

Este equipo puede reproducir toda clase de discos

de audio, como CD grabables y CD regrabables. No

intente reproducir un CD-ROM, CDi, VCD, DVD o CD

de ordenador.

1 Pulse el botón deslizante OPEN 2 para abrir

el reproductor.

2 Inserte un CD de audio, cara impresa hacia arriba

presionando el CD en el centro.

3 Cierre el reproductor empujando la tapa hacia abajo.

4 Pulse 2; para ponerlo en funcionamiento e iniciar la

reproducción.

yAparecerán en pantalla el número de pista

actual y el tiempo de reproducción transcurrido.

• Puede hacer una pausa la reproducción pulsando 2;.

yParpadeará en la pantalla el tiempo transcurrido

hasta el momento de la interrupción.

• Continúe la reproducción pulsando otra vez 2;.

5 Pulse 9 para detener la reproducción.

yAparecerá en la pantalla el número total

depistas y el tiempo total de reproducción del CD.

6 Pulse otra vez 9 para apagar el equipo.

• Para quitar el CD del equipo, sujételo por el borde y

presione suavemente el eje mientras levanta el disco.

Nota: Si no hay actividad, el equipo se apagará

automáticamente para ahorrar energía.

INFORMACIÓN GENERAL / REPRODUCCIÓN DE UN CD

Utilice solamente el adaptador de tensión AY 3545 (4822 219 10033) u AY 3548

(3140 118 71890) (4,5 V corriente continua, polo positivo a la patilla central) y el

adaptador de casete del vehículo AY 3501. Cualquier

otro producto podría dañar el equipo.

1 Coloque el equipo en una superﬁcie horizontal,

estable y sin vibraciones. Asegúrese de que esté

en un lugar seguro, en el que el equipo no sea ni

un peligro ni un obstáculo para el conductor y

para los pasajeros.

2 Enchufe el convertidor de tensión en la toma del

encendedor (sólo para baterias de 12 V,

negativo conectado a tierra), después

conecte el ﬁnal cableado al jack de entrada

4.5V DC en el equipo.

3 Si fuera necesario, limpie la toma del encendedor para lograr un buen

contacto eléctrico.

4 Baje el volumen y conecte el enchufe del adaptador de casete a LINE OUT/p en

el equipo.

5 Introduzca el adaptador de casete cuidadosamente en el compartimento del

radiocasete del vehículo.

6 Asegúrese de que el cable no le entorpece al conducir.

7 Disminuye el volumen del aparato, si es necesario. Inicie la reproducción en el

equipo y ajuste el sonido con los controles de la radio del coche.

• Extraiga siempre el adaptador de tensión de la toma del encendedor del

vehículo cuando no esté utilizando el equipo.

Nota: Si la radio de su coche tiene una toma LINE IN, es mejor utilizarla para

la conexión de la radio del vehículo en lugar del adaptador de casete. Conecte

el cable de señal a esta toma LINE IN y a LINE OUT/p en el equipo.

Utilización en el automóvil (conexiones incluidas u opcionales)

4,5 V DC

12 V DC

CD REWRITABLE COMP

ALIMENTACIÓN ELÉCTRICA / INFORMACIÓN GENERAL

Adaptador de red (incluido u opcional)

Utilice sólo el adaptador de red AY 3170 (4,5 V/300 mA

corriente continua, con el polo positivo en la patilla central).

Cualquier otro adaptador de red puede dañar el equipo.

1 Compruebe que el voltaje local es el mismo que el

del adaptador de red.

2 Conecte el adaptador de red a la toma 4.5V DC del

reproductor y a un enchufe de pared.

Nota: Desconecte siempre el adaptador cuando no vaya a utilizarlo.

Información medioambiental

• Se ha suprimido todo el material de embalaje innecesario. Hemos hecho todo lo

posible para que el embalaje pueda separarse en dos tipos únicos de

materiales: cartón (la caja) y polietileno (las bolsas y la plancha de espuma pro-

tectora).

• Los materiales que componen el equipo son reciclables y reutilizables si son

desmontados por una empresa especializada. Por favor, siga las normas y

regulaciones locales a la hora de tirar los materiales de embalaje, pilas

agotadas o su antiguo equipo a la basura.

Manejo del reproductor de CD y de los CDs

•

No toque las lentes A del reproductor de CDs.

• No exponga el equipo, las pilas o los CDs a la humedad,

lluvia, arena o calor excesivo (ya sea provocado por

aparatos calefactores como por la exposición directa al sol).

• Puede limpiar el reproductor de CD con un paño suave,

ligeramente humedecido y que no deje restos de hilos. No

utilice productos de limpieza, ya que pueden tener efectos

corrosivos.

• Para limpiar el CD, frótelo siguiendo líneas rectas desde el centro al exterior

utilizando un paño suave que no deje restos de hilos. Los productos de limpieza

pueden dañar el disco! No escriba nunca sobre el CD ni pegue en él ninguna etiqueta.

• Las lentes pueden quedar turbias cuando se traslade de forma rápida de un ambiente

frío a otro templado. Esto imposibilitará la reproducción de un CD. En ese caso, deje

reposar el reproductor en un lugar cálido hasta que se evapore la humedad.

• La utilización de teléfonos móviles en las proximidades del reproductor de CD puede

provocar un funcionamiento incorrecto.

• Evite las caídas del equipo, ya que podría sufrir daños.

Auriculares

• Conecte los auriculares incluídos con el equipo a la

clavija LINE OUT/p.

Nota: LINE OUT/ p también puede utilizarse para

conectar este aparato a su equipo estéreo. Para

ajustar el sonido y el volumen, utilice los mandos del

equipo audio conectado y del reproductor de CD.

¡IMPORTANTE!

Advertencia de seguridad: No emplee los auriculares a gran volumen. Los especialis-

tas de oídos advierten que el uso continuado a gran volumen puede dañar el oído de

manera permanente.

Seguridad en la carretera: No utilice los auriculares mientras conduzca un vehículo, ya

que podría provocar un accidente y es ilegal en muchos países. Aunque sus auricu-

lares sean para utilizar al aire libre y diseñados para permitirle oír los sonidos del

exterior, no ponga el volumen tan alto que no pueda oír lo que pasa a su alrededor.

Español CONTROLES / ALIMENTACIÓN ELÉCTRICA

CONTROLES

( V

anse las ﬁguras

)

1 OPEN 2 ..............abre la tapa del CD

2 ∞ .......................realiza un salto y busca hacia atrás en las pistas del CD

3 § .......................realiza un salto y busca hacia delante en las pistas del CD

4 2; ......................pone en marcha el equipo, inicia o hace una pausa en la

reproducción del CD

5 9.........................detiene la reproducción del CD, borra todos los programas o

apaga el equipo

6 DBB.....................activa y desactiva la intensiﬁcación de graves. Este botón

también activa y desactiva la realimentación acústica (el bip)

si se pulsa más de dos segundos

7 ............................pantalla

8 MODE.................selecciona entre las diferentes posibilidades de reproducción:

shufﬂe, shufﬂe repeat all, repeat, repeat all y SCAN

9 PROGRAM..........programa pistas y revisa el programa

0 RESUME.............guarda la última posición de una pista de CD reproducida

HOLD...................bloquea todos los botones

OFF......................desactiva RESUME y HOLD

! LINE OUT/p........conexión de 3,5 mm para auriculares, conexión para acoplar el

equipo a otro de entrada de un aparato adicional, conexión

para mando a distancia (no disponible en todas las versiones)

@ VOL E ............ajusta el volumen

# 4.5V DC...............conector para fuente de alimentación externa

$ ............................oriﬁcio del cinturón de cierre

% ............................placa de características técnicas

Pilas (incluidas o disponibles de forma opcional)

Con este equipo puede utilizar:

• pilas normales de tipo LR6, UM3 o AA (preferiblemente, Philips) o

• pilas alcalinas tipo LR6, UM3 o AA (preferiblemente, Philips).

Nota: No deben utilizarse mezcladas pilas nuevas con pilas usadas ni de tipos

diferentes. Si las pilas están descargadas o no va a utilizar el equipo

durante un largo período de tiempo, quítelas.

Instalación de las pilas

1 Pulse OPEN 2 para abrir la tapa del CD.

2 Abra el compartimento de las pilas e inserte

2 pilas normales, alcalinas.

Indicación de las pila

El nivel de carga aproximado de las pilas se muestra en la pantalla.

Pila cargada

Dos tercios de la pila cargados

Un tercio de la pila cargado

Pila descargada o gastada. Si las pilas están

descargadas o gastadas parpadea, bAtt

aparecerá y el bip sonará repetidamente.

Tiempo medio de reproducción con pilas en condiciones normales

Tipo de pila ESP activado Ahorro de

energía

Normal 5 horas 6 horas

Alcalina 16 horas 20 horas

Al deshacerse de las pilas, hágalo con precaución, ya que éstas

contienen sustancias químicas peligrosas.

NOTES

AX32XX /17 30/10/02 11:00 Page 2