Yamaha CVP-905 Guia de referencia

Categoría
Sintetizador
Tipo
Guia de referencia

Este manual también es adecuado para

CVP-909
CVP-905
Reference Manual
This manual explains the functions called up by touching each icon shown in the Menu display.
Please read the Owner’s Manual first for basic operations, before reading this Reference Manual.
The illustrations and displays as shown in this manual are based on the CVP-909 (in English). These are for instructional
purposes only.
The explanations in this manual apply to the firmware version 1.00. Yamaha may from time to time update firmware of the
product without notice for improvement. We recommend that you check our website for later releases and upgrade your
firmware.
https://download.yamaha.com/
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Using the PDF manual
To quickly jump to items and topics of interest, click on the desired items in the “Bookmarks” index to the left of
the computer display window. (Click the “Bookmarks tab to open the index if it is not displayed.)
Click the page numbers that appear in this manual to go directly to the corresponding page.
Select “Find” or “Advanced Search” from the Adobe Reader “Edit” menu and enter a keyword to locate
related information anywhere in the document.
NOTE The names and positions of menu items may vary according to the version of Adobe Reader being used.
EN
CVP-909/CVP-905 Reference Manual 2
Contents
Each chapter in this Reference Manual corresponds to each icons on the Menu display.
Adjusting the Tempo ...................... 4
Transposing the Pitch in Semitones 5
Changing the Split Point, Fingering
Type or Chord Detection Area ....... 6
Learning How To Play Specific
Chords (Chord Tutor) ..................... 8
Adjusting the Volume Balance ...... 9
Editing the Volume and Tonal
Balance (Mixer) ............................. 10
Editing Music Notation (Score)
Settings.......................................... 18
Editing Lyrics Display Settings ... 20
Showing the Text Display and
Editing Text Display Settings ...... 22
Using Keyboard Harmony............ 24
Microphone Settings .................... 26
Vocal Harmony Settings............... 28
Using Playlist ................................ 33
Calling Up Registration Memory
Numbers in Order
(Registration Sequence)............... 35
Disabling Recall of Specific Items
(Registration Freeze) .................... 37
Playing Styles Automatically with
Your Custom Chord Progressions
(Chord Looper).............................. 38
Assigning a Specific Function to Each
Pedal or ASSIGNABLE button....... 43
Editing a Voice (Voice Edit)..........47
Editing an Organ Flutes Voice
(Voice Edit).....................................51
Creating/Editing Styles (Style
Creator) ..........................................53
Creating/Editing MIDI Songs
(Song Creator) ...............................66
Voice Settings................................78
Style Playback Related Settings.. 84
Song Settings Related to Playback/
Recording.......................................87
Fine Tuning the Pitch....................92
Setting the Touch Sensitivity of the
Keyboard........................................94
Metronome Settings......................95
MIDI Settings..................................96
Making Global Settings (Utility) . 102
Connecting to a Bluetooth-equipped
Device...........................................107
Wireless LAN Settings ................108
Making the Time Settings ...........110
Index ................................................... 111
NOTE The “Bluetooth” icon is shown only if the instrument is equipped with Bluetooth functionality. Depending on the country in which
you purchased it, Bluetooth may not be available.
NOTE The “WirelessLAN” and “Time” icons are shown only when the USB Wireless LAN adaptor (UD-WL01) is connected to the [USB
TO DEVICE] terminal.
CVP-909/CVP-905 Reference Manual 3
Calling up Desired Functions from the Home Display
From all the functions shown on the Menu display, you can pick out an often used one and register it to a
shortcut and place it in the Menu area at the bottom of the Home display. Although seven shortcuts are
registered by default, you can customize them as necessary.
1Touch and hold the icon of the desired function until the color of the shortcut
area (bottom of the display) changes.
NOTE To cancel this operation, touch any blank location on the display before going on to step 2.
2From the seven locations at the bottom of the display, touch the one you want
to replace.
The function selected in step 1 will be registered, replacing the one selected here.
To delete or move a shortcut, touch and hold the desired shortcut icon on the Home display or the Menu
display until the color changes. Then, touch the same icon again to delete it or touch the desired
destination icon to move the shortcut.
1
2
CVP-909/CVP-905 Reference Manual 4
Adjusting the Tempo
NOTE The tempo value of an Audio Song is set via the Time Stretch function. Refer to the Owner’s Manual, Chapter 5.
Indicates the tempo value during playback of the metronome, Style and MIDI Song.
Indicates the tempo value of the current Style. The Style will be started at this tempo.
Indicates the tempo value of the current MIDI Song. The Song will be started at this tempo.
These are basically equivalent to the TEMPO [−]/[+] buttons on the panel. If you want to call up
the default tempo of the current Style and MIDI Song, touch and hold any area in .
Equivalent to the [TAP TEMPO] button on the panel.
CVP-909/CVP-905 Reference Manual 5
Transposing the Pitch in Semitones
You can transpose the overall pitch of the instrument (the keyboard sound, Style playback, MIDI Song
playback, and so on) in semitone steps.
NOTE The pitch of an Audio Song is adjusted via the Pitch Shift function. Refer to the Owner’s Manual, Chapter 5.
NOTE Transpose is not applied to the Drum Kits and SFX Kits Voice.
NOTE Transpose can also be done by using the TRANSPOSE buttons on the control panel. By touching the Transpose pop-up several
times, you can select the part to be transpose as desired.
Master Transposes the overall pitch of the instrument, except for the Audio Songs, sound input to
the [MIC/LINE IN] jack, and the Audio input from an external device by using such as [AUX
IN] jack.
Keyboard Transposes the pitch of keyboard including Style playback (controlled via the chord section
of the keyboard).
Song Transposes only the pitch of MIDI Song playback.
CVP-909/CVP-905 Reference Manual 6
Changing the Split Point, Fingering
Type or Chord Detection Area
For information about Split Point, refer to the Owner’s Manual, Chapter 3. For information about Fingering
Types, refer to the Owner’s Manual, Chapter 4.
Chord Types Recognized in the Fingered Mode
Split Point/Fingering Type
Chord Name [Abbreviation] Normal Voicing Display for root “C”
1+8 1+8 C1+8
1+5 1+5 C1+5
Major [M] 1+3+5 C
Sixth [6] 1+(3)+5+6 C6
Major seventh [M7] 1+3+(5)+7 CM7
Major seventh flatted fifth [M7
5] 1+3+
5+7 CM7(
5)
Major seventh add sharp eleventh [M7(
11)] 1+(2)+3+
4+5+7 CM7(
11)
Add ninth [(add9)] 1+2+3+5 Cadd9
Major seventh ninth [M7_9] 1+2+3+(5)+7 CM7(9)
Sixth ninth [6_9] 1+2+3+(5)+6 C6(9)
Flatted fifth [(
5)] 1+3+
5C
5
Changing the Split Point, Fingering Type or Chord Detection Area
CVP-909/CVP-905 Reference Manual 7
NOTE Notes in parentheses can be omitted.
NOTE The “cancel” indication refers to Chord Cancel, which stops the last selected chord from playing and leaves only the drums/
rhythm.
By changing the Chord Detection area from the left-hand section to the right-hand section, you can play a bass
line with your left hand while using your right hand to play chords for controlling Style playback.
1Call up page 2/2 of the Split Point/Fingering window.
2Make the necessary settings by touching the display.
Augmented [aug] 1+3+
5Caug
Seventh augmented [7aug] 1+3+
5+
7 C7aug
Major seventh augmented [M7aug] 1+(3)+
5+7 CM7aug
Minor [m] 1+
3+5 Cm
Minor sixth [m6] 1+
3+5+6 Cm6
Minor seventh [m7] 1+
3+(5)+
7Cm7
Minor seventh flatted fifth [m7
5] 1+
3+
5+
7Cm7(
5)
Minor add ninth [m(add9)] 1+2+
3+5 Cm add9
Minor seventh ninth [m7(9)] 1+2+
3+(5)+
7 Cm7(9)
Minor seventh eleventh [m7(11)] 1+(2)+
3+4+5+(
7) Cm7(11)
Minor major seventh flatted fifth [mM7
5] 1+
3+
5+7 CmM7(
5)
Minor major seventh [mM7] 1+
3+(5)+7 CmM7
Minor major seventh ninth [mM7(9)] 1+2+
3+(5)+7 CmM7(9)
Diminished [dim] 1+
3+
5Cdim
Diminished seventh [dim7] 1+
3+
5+6 Cdim7
Seventh [7] 1+3+(5)+
7C7
Seventh suspended fourth [7sus4] 1+4+5+
7C7sus4
Seventh ninth [7(9)] 1+2+3+(5)+
7 C7(9)
Seventh add sharp eleventh [7(
11)] 1+(2)+3+
4+5+
7C7(
11)
Seventh add thirteenth [7(13)] 1+3+(5)+6+
7 C7(13)
Seventh flatted fifth [7
5] 1+3+
5+
7C7(
5)
Seventh flatted ninth [7(
9)] 1+
2+3+(5)+
7C7(
9)
Seventh add flatted thirteenth [7(
13)] 1+3+5+
6+
7C7(
13)
Seventh sharp ninth [7(
9)] 1+
2+3+(5)+
7C7(
9)
Suspended fourth [sus4] 1+4+5 Csus4
One plus two plus five [sus2] 1+2+5 Csus2
cancel 1+
2+2 Cancel
Specifying Chords with Your Right Hand for Style Playback
Chord Detection Area Select “Upper.” The Chord section is set to the right of the Left Split Point.
Fingering type is set to “Fingered*” automatically.
NOTE “Fingered*” is basically same as “Fingered,” except that “1+5,” “1+8” and Chord
Cancel are not available.
NOTE When the Chord Detection Area is set to “Lower,” the Chord section is set to the left
of the Style Split Point. For details, refer to the Owner’s Manual, Chapter 4.
Manual Bass When this is set to “On,” the bass part of the current Style is muted allowing you to
play that part on the left part.
NOTE This parameter is available only when the “Chord Detection Area” is set to “Upper.”
Chord Name [Abbreviation] Normal Voicing Display for root “C”
Style Split Point
Chord Detection Area
(Upper)
Left Split Point
Left Part Main/Layer parts
CVP-909/CVP-905 Reference Manual 8
Learning How To Play Specific
Chords (Chord Tutor)
If you know the name of a chord but don’t know how to play it, this function indicates you the notes you should
press.
NOTE Depending on the chord, some notes may be omitted.
Root Lets you select the desired Chord Root.
Type Lets you select the desired Chord Type.
CVP-909/CVP-905 Reference Manual 9
Adjusting the Volume Balance
For information about this display, refer to the Owner’s Manual, Chapter 1.
CVP-909/CVP-905 Reference Manual 10
Editing the Volume and Tonal
Balance (Mixer)
The “Panel” – “Audio” Part Selection tabs at the top of the Mixer display let you adjust the sound for each
corresponding part, while “Master” lets you make overall sound adjustments for the entire instrument.
NOTE When an Audio Song is selected, you cannot set the parameters related to the Song part or channels.
NOTE Knobs and sliders appear on the setting displays only when the relevant parameters are available.
For a visual indication of the signal flow and configuration of the Mixer, refer to the Block Diagram on page 17.
This function modifies the tonal characteristics (brightness, etc.) of the sound by cutting the output of a specific
frequency portion of the sound. This is not available when you select “Master” from among the tabs at the top
of the Mixer display.
Filter
Harmonic Content Allows you to adjust the Resonance effect (page 49) for each part. This can be used in
combination with the “Brightness” parameter to add further character to the sound.
Brightness Determines the brightness of the sound for each part by adjusting the cutoff frequency
(page 49).
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 11
Equalizer (also called “EQ”) is a sound processor that divides the frequency spectrum into multiple bands that
can be boosted or cut as required to tailor the overall frequency response. The “Panel” – “Song Ch9-16” Part
Selection tabs at the top of the Mixer display let you adjust the EQ for each corresponding part, while “Master”
lets you make overall EQ adjustments for the entire instrument.
Part EQ (when one of the “Panel”“Song Ch 9-16” tabs is selected)
Master EQ (when the “Master” tab is selected)
This instrument possesses a high-quality five-band digital EQ. With this function, a final effect — tone control
— can be applied to the output of your instrument. You can select one of the five preset EQ types in the
“Master” display. You can even create your own custom EQ settings by adjusting the frequency bands, and
save the settings to one of two User Master EQ types.
NOTE Master EQ cannot be applied to Audio playback or the Metronome sound.
EQ (Equalizer)
High Boosts or attenuates the high EQ band for each part.
Low Boosts or attenuates the low EQ band for each part.
1
2
3
4
0
80Hz 500Hz
1.0kHz 4.0kHz 8.0kHz
Bandwidth (also called “Shape” or “Q”)
Frequency
Gain
5 bands (default)
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 12
1Select the desired EQ type to be edited.
Flat: Flat EQ settings. The gain of each frequency is set to 0dB.
Light: EQ setting for decreasing the level of the low frequencies, making the sound clearer.
Heavy: EQ setting for boosting the level of the low frequencies, making the sound more powerful.
Mellow: EQ setting for decreasing the level of the high frequencies, making the sound more mellow.
Bright: EQ setting for boosting the level of the high frequencies, making the sound brighter.
User1–30: Your own custom EQ settings saved in step 4.
2Adjust the Q (bandwidth) and the Center Frequency of each band.
The available Frequency range is different for each band. The higher the value of Q, the narrower the bandwidth.
3Adjust the Gain level to boost or cut each of the five bands as desired.
4Touch (Save) then save the settings as a User Master EQ type.
Up to two EQ types can be created and saved.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE If you want to save the Master EQ settings to the USB flash drive, save as a User Effect file. To do this, from the display
called up via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “User Effect” to execute the
Save operation (page 105).
This instrument features the following Effect Blocks.
System Effect (Chorus, Reverb): These Effects are applied to the entire sound of this instrument. For
each part, you can adjust the depth of the System Effect. Refer to “Chorus/Reverb” (page 14).
Insertion Effect 1 – 28 (CVP-909) / Insertion Effect 1 – 8 (CVP-905): These Effects are applied
only to a specific part. For each of these Effects, select an Effect type specifically for the desired part (for
example, Distortion, which would be applied only to the Guitar part).
Variation Effect: This Block can be used both as System Effects and Insertion Effects, and you can switch
between them.
These explanations cover the settings related to the Insertion Effects and Variation Effects on the Effect
display. This display is not available when the “Master” tab is selected at the top of the Mixer display.
Effects
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 13
NOTE For details about the Effect types, refer to the “Effect Type List” in the Data List (separate PDF).
Editing and Saving the Effect settings
You can edit the settings of the System Effects (Chorus, Reverb), Insertion Effects and Variation Effect. The
edits can be saved as a User Effect type.
1From the Mixer display, touch the desired Effect type to call up the Effect Type
Selection display.
2Select the Effect type if necessary, then touch (Setting) to call up the Effect
Parameter display.
3Make the necessary setting for each parameter.
The available parameters differ depending on the Effect type.
NOTE Parameters that are grayed out cannot be edited.
4Touch (Save), then save the settings as a User Effect type.
Up to 30 Effect types can be stored for each of the Effect Blocks.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE If you want to save the Effect settings to a USB flash drive, save as a User Effect file. To do this, from the display called up
via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “User Effect” to execute the Save
operation (page 105).
Insertion
Effect
Lets you assign the desired Insertion Effect Type for each part by touching the area above each knob.
You can adjust the degree to which each Effect is applied by using the knobs.
If you want to assign each of the Insertion Effects to a specific Part and select an Effect Type, touch
(Setting) at the upper right of this area and make necessary settings in the window. The
assignable Parts for each Insertion Effect are as follows:
CVP-909
Insertion Effect 1 – 19: Keyboard Parts, Song channels 1 – 16
Insertion Effect 20: Microphone, Song channels 1 – 16
Insertion Effect 21 – 28: Style Parts
CVP-905
Insertion Effect 1 – 5: Keyboard Parts, Song channels 1 – 16
Insertion Effect 6: Microphone, Song channels 1 – 16
Insertion Effect 7 – 8: Style Parts
Variation
Effect
Touch [Insertion] or [System] to switch the Effect Connection between the Insertion Effect and System
Effect, then touch the right end of this line to select the desired Effect type.
When “System” is selected, this Effect is applied to all parts of the Song and Style as the System
Effect. When “Insertion” is selected, this Effect is applied only to the specified Song/Style part.
To adjust the degree to which the Effect is applied, use the knob of each part.
3
4
2
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 14
As described in the previous section, Chorus and Reverb are System Effects which are applied to the entire
sound of the instrument. They are not available when the “Master” tab is selected at the top of the mixer
display.
When VRM Voices are selected, “VRM” indications appear under the knobs of the parts. If VRM Voices are
selected for multiple parts, the Chorus depth and the Reverb depth are applied commonly to all these parts.
NOTE For details about the Chorus and Reverb types, refer to the “Effect Type List” in the Data List (separate PDF).
Editing and Saving the Chorus/Reverb settings
Same as the operation on the “Effect” display (page 13).
Chorus/Reverb
Chorus Touch the Chorus type name at the top right of this row to select the desired Chorus type. After
selecting, return to the Mixer display then use each knob to adjust the Chorus depth for each part.
Reverb Touch the Reverb type name at the top right of this row to select the desired Reverb type. After
selecting, return to the Mixer display then use each knob to adjust the Reverb depth for each part.
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 15
You can adjust the Pan (stereo position of the sound) and Volume for each Part. This display is not available
when the “Master” tab is selected at the top of the Mixer display.
Compressor is an effect commonly used to limit and compress the dynamics (softness/loudness) of an audio
signal. For signals that vary widely in dynamics, such as vocals and guitar parts, it “squeezes” the dynamic
range, effectively making soft sounds louder and loud sounds softer. When used with gain to boost the overall
level, this creates a more powerful, more consistently high-level sound.
This instrument features a Master Compressor which is applied to the entire sound of this instrument.
Although preset Master Compressor settings are provided, you can also create and save your original Master
Compressor presets by adjusting the related parameters. This display is available only when the “Master” tab
is selected at the top of the Mixer display.
NOTE Master Compressor cannot be applied to Audio playback or the Metronome sound.
Pan/Volume
Pan Determines the stereo position of each part (channel).
Volume Determines the level of each part or channel, giving you fine control over the balance of all the
parts.
Master Compressor
12
3
4
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 16
1Set the Compressor to “On.”
2Select the Master Compressor type to be edited.
Natural: Natural Compressor settings in which the effect is moderately pronounced.
Rich: Rich Compressor settings in which the instrument’s characteristics are optimally brought out.
This is good for enhancing acoustic instruments, jazz music, etc.
Punchy: Highly exaggerated Compressor settings. This is good for enhancing rock music.
Electronic: Compressor settings in which the electronic dance music’s characteristics are optimally
brought out.
Loud: Powerful Compressor settings. This is good for enhancing energetic music such as rock or
gospel music.
User1–30: Your own custom Compressor settings saved in step 4.
3Edit the parameters related to the Master Compressor.
The indication “GR” shows the Gain Reduction (compressed level) while “Output” shows the output level
according to the instrument sound in real time.
4Touch (Save), then save the settings as a User Master Compressor type.
Up to 30 Master Compressor types can be created and saved.
NOTICE
The settings will be lost if you turn the power to the instrument off without executing the Save operation.
NOTE If you want to save the Master Compressor settings to a USB flash drive, save them as a User Effect file. To do this, from
the display called up via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “User Effect” to
execute the Save operation (page 105).
Compression Parameters such as Threshold, Ratio and Soft Knee (which are available on commonly
used compressors) are all changed together at the same time, letting you moderately
compress the sound.
Texture Adds natural characteristics to the effect. The higher the value, the lighter it becomes.
NOTE It may be easier to hear the changes when used in combination with “Compression” and
“Output.”
Output Determines the output level.
Editing the Volume and Tonal Balance (Mixer)
CVP-909/CVP-905 Reference Manual 17
CVP-909
CVP-905
* MIC EFFECT = 3 Band EQ/Noise Gate/Compressor, VH = Vocal Harmony, VE = Vocal Harmony Effect
Block Diagram
CVP-909/CVP-905 Reference Manual 18
Editing Music Notation (Score)
Settings
Select a MIDI Song then touch [Score] to call up the music notation of the current MIDI Song. You can change
the notation indication as desired to suit your personal preferences.
From the display called up via (Play Setting), you can set the parameters related to playback of the
current MIDI Song. The parameters explained here can also be set on the Song area (with expanded) of the
Home display.
Indicates the name of the current Song. Also, the tempo value is shown at the right end. If you want to
change the Song, touch the Song name to call up the Song Selection display.
Lets you set the parameters related to playback Parts of the MIDI Song. For details, refer to “Play Setting”
(page 18).
Lets you set the notation indication parameters, including notation size, chord display, etc. For details, refer
to “View Setting” (page 19).
Lets you set more detailed parameters related to the notation indication. Refer to “Detail Setting” (page 19).
Play Setting
Extra Turns playback of all Channels on or off, except for those assigned to the Left and Right Hand Parts
described below.
Left Turns playback on or off for the Left Hand Part, to which you can assign the desired channel on the Song
Setting display (page 88).
Right Turns playback on or off for the Right Hand Part, to which you can assign the desired channel on the
Song Setting display (page 88).
Guide Turns the Guide function on or off. For details, refer to the Owner’s Manual, Chapter 5.
Turns Repeat playback on or off and lets you specify the Repeat playback range. For details, refer to the
Owner’s Manual, Chapter 5.
Editing Music Notation (Score) Settings
CVP-909/CVP-905 Reference Manual 19
From the display called up via (View Setting), you can set the parameters related to the view of the
notation.
From the display called up via (Detail Setting), you can set more detailed parameters.
View Setting
Size Determines the display resolution (or zoom level) of the notation.
Left Turns indication of the left-hand notation on or off. If an “-” indication appears at this parameter and is
unavailable, go to the “Detail Setting” display (page 19), then set the Left Ch to any channel except “Auto.”
Or, on the display called up via [Menu] [SongSetting] [Part Ch], then set the Left to any channel
except “Off” (page 88).
NOTE Both Right (below) and Left cannot be turned off at the same time.
Right Turns indication of the right-hand notation on or off.
NOTE Both Right and Left (above) cannot be turned off at the same time.
Chord Turns indication of the chords on or off. If the current Song does not contain chord data, no chord
information is shown even if this is checked.
Lyrics Turns indication of the Lyrics on or off. If the current Song does not contain lyrics data, no lyrics are
shown even if this is checked. If the Song contains Pedal events, touching here switches between “Lyrics”
and “Pedal.” When “Pedal” is checked, Pedal events are shown instead of Lyrics on the display.
Note Turns indication of the Note names on or off. When this is checked, each note name is shown at the left
side of each note. If the Song contains Fingering events, touching here switches between “Note” and
“Fingering.” When “Fingering” is checked, Fingering events are shown instead of Note names on the
display.
Color When this is checked, the notes in the display appear in identifying colors (C: red, D: yellow, E: green, F:
orange, G: blue, A: purple, and B: gray).
Detail Setting
Right Ch Determines which MIDI channel in the MIDI Song data is used for the right-hand/left-hand part. This
setting returns to “Auto” when a different Song is selected.
• Auto: The MIDI channels in the MIDI Song data for the right- and left-hand parts are assigned
automatically — setting each part to the channel which has been specified at the Part Ch (page 88)
on the Song Setting display.
•116: Assigns a specified MIDI channel (1–16) to each of the right- and left-hand parts.
•Off (Left Ch only): No channel assignment. This disables display of the left-hand notation.
Left Ch
Key
Signature
Lets you enter the Key Signature at the current stopped position of the MIDI Song. This setting is
useful for Songs you’ve recorded with key changes, so the key signature changes are properly
reflected in the notation.
Quantize This gives you control over the note resolution in the notation, letting you shift or correct the timing of
all displayed notes so that they line up to a particular note value. Make sure to select the smallest
note value used in the Song.
Note Name Selects the type of the note name indicated at the left of the note in the notation from among the
following three types. The settings here are available when the Note parameter (page 19) is checked.
A, B, C: Note names are indicated as letters (C, D, E, F, G, A, B).
Fixed Do: Note names are indicated in solfeggio and differ depending on the selected language.
•Movable Do: Note names are indicated in solfeggio according to the scale intervals, and as such
are relative to the key. The root note is indicated as Do. For example, in the key of G major the root
note of “Sol” would be indicated as “Do.” As with “Fixed Do,” the indication differs depending on the
selected language.
CVP-909/CVP-905 Reference Manual 20
Editing Lyrics Display Settings
After selecting a Song, you can call up the lyrics of the current Song (if it contains lyrics data) by touching
[Lyrics]. You can change the lyrics indication as desired to suit your personal preferences.
NOTE When the lyrics are garbled or unreadable, you may need to change the Lyrics Language setting on the display called up via
[Menu] [SongSetting] [Lyrics].
Indicates the name of the current Song. Also, the current measure number for the MIDI Song or the elapsed
time for the Audio Song is shown at the right end. If you want to change the Song, touch the Song name here
to call up the Song Selection display.
Lets you set the parameters related to playback, such as playback parts for the MIDI Song or the Vocal
Cancel function for the Audio Song. For details, refer to “Play Setting” (page 18 for MIDI Songs, page 21 for
Audio Songs).
Allows you to change the background picture of the Lyrics display and Text display.
As well as various pictures provided in the Preset tab, you can select an original picture file (a bitmap file with
no greater than 800 x 480 pixels) in the USB flash drive. The original picture file can be copied from the USB
flash drive to the internal User memory.
NOTE The setting here is applied also to the Text display.
(only
Audio
Songs)
Lets you select the font type. “Medium” keeps each character at the same width, and “Proportional Medium”
changes the width depending on the characters.
Priority of Lyrics data of an Audio Song (MP3 file)
When showing the lyrics data of an Audio Song (MP3 file), only one type of data (according to the priority order
below) is shown:
1) CDG file (*.cdg) with the same name of the MP3 file in the same folder.
2) Lyrics in the MP3 file with the LYRICSBEGIN tag.
3) Lyrics in the MP3 file with the SLT/SYLT tag.
4) Lyrics in the MP3 file with the ULT/USLT tag.
5) Text file (*.txt) with the same name of the MP3 file in the same folder.
Editing Lyrics Display Settings
CVP-909/CVP-905 Reference Manual 21
From the display called up via (Play Setting), you can set the parameters related to playback of the
current Audio Song. The parameters explained here can also be set on the Song area (when expanded) of the
Home display.
Play Setting (Audio Song)
Turns the Vocal Cancel function on/off. For details, refer to the Owner’s Manual, Chapter 5.
Turns the repeat playback on/off or specifies the repeat range. For details, refer to the Owner’s
Manual, Chapter 5.
CVP-909/CVP-905 Reference Manual 22
Showing the Text Display and
Editing Text Display Settings
Text files (.txt) of 60 KB or smaller created on a computer can be viewed on the instrument’s display. This
feature enables various useful possibilities, such as the showing of lyrics, chord names, and text notes.
If you want to view the text in a USB flash drive, connect the USB flash drive containing text data to the [USB
TO DEVICE] terminal beforehand.
1Call up the Text display via [Menu] [TextViewer].
2Touch the bottom left corner on the display to call up the Text File Selection
display.
3Select the desired text file, and touch [Close] to show the text in the display.
If the text extends over several pages, you can scroll through the entire text by touching [] or [], which
are shown at the right and left of the page. To clear the text from the display, touch [×] located at right of
the text file name.
NOTE Line breaks are not automatically entered in the instrument. If a sentence is not displayed in its entirety because of
limitations in the screen space, enter line breaks manually on your computer by using a text editor, etc. beforehand.
Information about Text File selection can be memorized to the Registration Memory. For details, refer to the Owner’s
Manual, Chapter 8.
The preset text files are sample data for the Playlist function. For details about Playlist, refer to the Owner’s Manual,
Chapter 8.
The Text can be displayed on an external monitor or television. For details on instructions, refer to the Owner’s Manual,
Chapter 10.
Showing the Text Display
2
Page
Showing the Text Display and Editing Text Display Settings
CVP-909/CVP-905 Reference Manual 23
NOTE When the text is garbled or unreadable, you may need to change the language setting on the display called up via [Menu]
[Utility] [System].
Editing Text Display Settings
Indicates the current text file which is shown on the display. Touching here calls up the text File Selection
display which lets you select an original text file in the USB flash drive or copy it from the USB flash drive to
the internal User memory.
Clears the text from the display. This operation does not delete the text file itself, but simply leaves the display
empty of any text file.
Lets you set the parameters related to playback Parts of the MIDI Song. For details, refer to “Play Setting”
(page 18).
Allows you to change the background picture of the Lyrics display and Text display.
As well as various pictures provided in the Preset tab, you can select your original picture file (a bitmap file
with no greater than 800 x 480 pixels) in the USB flash drive. Your original picture file can be copied from the
USB flash drive to the internal User memory.
NOTE The setting here is applied also to the Lyrics display.
Lets you select the font size or type. “Small,” “Medium, or “Large” keeps each character at the same width,
and is suitable for displaying lyrics with chord names above, etc. “Proportional Small,” “Proportional Medium,”
and “Proportional Large” are suitable for displaying lyrics without chord names or explanatory notes.
CVP-909/CVP-905 Reference Manual 24
Using Keyboard Harmony
1Set the Keyboard Harmony function to “On.”
When this is set to “On,” Harmony or Echo is applied to your keyboard performance automatically.
2Adjust related parameters such as Harmony type and volume.
NOTE The available parameters differ depending on the Harmony type.
Type Lets you select one of the Harmony types, which are divided into the following groups.
Harmony Type (Standard Duet — Strum)
These types apply the harmony effect to notes played in the right-hand section of the keyboard
according to the chord specified in the left-hand section of the keyboard. (Note that the “1+5”
and “Octave” settings are not affected by the chord.)
If you want to use these types with the Style stopped, set the “Stop ACMP” parameter to a
setting other than “Disabled” in the Style Setting display (page 84).
When [ACMP ON/OFF] is turned on:
When the Left part is on:
When [ACMP ON/OFF] and
the Left part are on:
1
Split Point
Chord section for Style playback and Harmony effect
Split Point
Main and Layer Voices
Left Voice and chord section for Harmony effect
Style Split Point Left Split Point
Left Voice Main and Layer Voices
Chord section for Style playback and Harmony effect
Using Keyboard Harmony
CVP-909/CVP-905 Reference Manual 25
Type Multi Assign
The Multi Assign effect automatically assigns notes played simultaneously on the right-hand
section of the keyboard to separate parts (Voices). Both of the keyboard parts [Main] and
[Layer] should be turned on when using the Multi Assign effect. The Main and Layer Voices are
alternately assigned to the notes in the order you play.
Echo Type (Echo, Tremolo and Trill)
When one of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is
applied to the note played in the right-hand section of the keyboard in time with the currently
set tempo, regardless of the [ACMP ON/OFF] and the Left part on/off status. Keep in mind that
Trill only works when you hold down two notes on the keyboard simultaneously (last two notes
if more than two notes are held), and it plays those notes alternately.
Volume This parameter is available for all types with the exception of “Multi Assign.” It determines the
level of the harmony/echo notes generated by the Harmony/Echo effect.
Speed This parameter is only available when Echo, Tremolo, or Trill is selected in Type above. It
determines the speed of the Echo, Tremolo, and Trill effects.
Assign This parameter is available for all types with the exception of “Multi Assign.” This lets you
determine the keyboard part via which the harmony/echo notes will be sounded.
• Auto: Applies the effect to the part which is turned on. When the both parts are on, the Main
part is given priority over the Layer part.
•Multi: When both parts are on, the note played on the keyboard is sounded by Main part
and the harmonies (effect) are divided to the Main and Layer parts. When only one part is
on, the note played on the keyboard and effect are sounded by that part.
•Main, Layer: Applies the effect to the selected part (Main or Layer).
Chord Note
Only
This parameter is available when one of the Harmony Types is selected. When this is set to
“On,” the Harmony effect is applied only to notes (played in the right-hand section of the
keyboard) that belong to a chord played in the chord section of the keyboard.
Minimum
Velocity
This parameter is available for all types with the exception of “Multi Assign.” It determines the
lowest velocity value at which the harmony note will sound. This allows you to selectively apply
the harmony by your playing strength, letting you create harmony accents in the melody. The
harmony effect is applied when you play the key strongly (above the set value).
CVP-909/CVP-905 Reference Manual 26
Microphone Settings
This section lets you set parameters for various Effects that are applied to the microphone sound. You should
make both “Vocal” and “Talk” settings — “Vocal,” for your singing performance, and “Talk,” for making
announcements between songs, for example.
Microphone
On/Off
Turns on or off the microphone sound. When set to On, the microphone sound will be input to the
instrument.
NOTE The setting here is equivalent to that in the Vocal Harmony display (page 28).
Vocal/Talk
Switch
When you sing into the microphone for your performance, set this to “Vocal.” When you talk
normally or need to make announcements between songs of your performance, set this to “Talk.”
This lets you instantly change the microphone settings depending on the situation.
NOTE The setting here is equivalent to that in the Vocal Harmony display (page 28).
Volume
Adjustment
Adjusts the input volume of the microphone sound. The input level is shown at the right.
NOTE The setting here is equivalent to that in the Vocal Harmony display (page 28).
3 Band EQ EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can
be boosted or cut as required to tailor the overall frequency response. The instrument features a
three-band (Low, Mid and High) digital equalizer function for the microphone sound. For each of
three bands, you can adjust the center frequency (Hz) and level (dB) via the corresponding
knobs on the display.
Noise Gate This effect mutes the input signal when the input from the microphone falls below a specified
level. This effectively cuts off extraneous noise, allowing the desired signal (vocal, etc.) to pass.
On/Off Turns Noise Gate on or off.
Th. (Threshold)
Adjusts the input level above which the gate begins to open.
Compressor This effect holds down the output when the input signal from the microphone exceeds a
specified level. This is especially useful for smoothing out vocals that have widely varying
dynamics. It effectively “compresses” the signal, making loud parts softer, or vice versa.
On/Off Turns Compressor on or off.
Th. (Threshold)
Adjusts the input level above which compression begins to be applied.
Ratio Adjusts the compression ratio. Higher ratios result in a more compressed
sound, with a reduced dynamic range.
Output Adjusts the final output level.
When “Vocal” is selected: When “Talk” is selected:
Microphone Settings
CVP-909/CVP-905 Reference Manual 27
NOTICE
The settings here are lost if you turn off the power without executing the Save operation.
NOTE When “Vocal” is selected, you can adjust Reverb/Chorus settings for your singing voice on the Mixer display (page 14).
You can store the microphone settings by touching (Save) then selecting one of 60 User Memories. For
ease in future recall, you should assign a sufficiently descriptive name or one that matches your performance.
To call up the microphone settings, touch the setting name at left of (Save) then select the desired file.
NOTE If you want to save the microphone settings to a USB flash drive, save as a User Effect file. To do this, on the display called up
via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “User Effect” to execute the Save operation
(page 105).
Pitch Detect
(only when
“Vocal” is
selected)
Lets you set how the pitch of the microphone sound during performance is detected.
Vocal Type Set this to obtain the most natural vocal harmony, depending on your voice.
•Low: Setting for lower voices. This setting is also appropriate for growling
and shouting.
•Mid: Setting for mid-range voices.
• High: Setting for higher voices. This setting is also appropriate for singing
close to the microphone.
•Full: Setting for vocalists having a wide range, from low to high.
Speed Adjusts the response speed of the Vocal Harmony effect, or how quickly
harmonies are generated in response to your voice. The larger the number,
the faster the response.
NOTE When one or both of Lead Pitch Detect Speed and Harm Pitch Detect Speed
parameters of Vocal Harmony (page 31) are set to “as MIC SETTING,” this
parameter is effective. In other settings, the setting of the Vocal Harmony’s
Pitch Detect Speed is effective.
Background
Noise Cut
This allows you to filter out noises that would interfere with the pitch
detection. A setting of “Thru” turns the noise filter off.
Talk Mixing
(only when
“Talk” is
selected)
Lets you make settings for talking or making announcements between songs during a performance.
Pan
Determines the stereo pan position of the microphone sound.
Reverb Depth
Determines the depth of the reverb effects applied to the microphone sound.
Chorus Depth
Determines the depth of the chorus effects applied to the microphone sound.
Attenuator Determines the amount of reduction to be applied to the overall sound
(excepting the microphone input) — allowing you to effectively adjust the
balance between your voice and the overall instrument sound.
Storing the Microphone Settings
CVP-909/CVP-905 Reference Manual 28
Vocal Harmony Settings
This section allows you to set various Vocal Harmony parameters, even though just selecting a Vocal Harmony
Type will call up the appropriate settings and you need not edit these parameters normally. If you want to make
more detailed settings for your performance, read this chapter.
NOTE The settings here are equivalent to those in the Microphone Setting display (page 26).
Basic Parameters
Microphone On/Off Turns the microphone sound on or off. When this is set to On, the microphone
sound is input to the instrument.
Vocal/Talk Switch When you sing into the microphone, this should be set to “Vocal.” When you talk
normally or make announcements between songs, this should be set to “Talk.” If
you want to set the Vocal Harmony parameters, this should be set to “Vocal.”
Volume Adjustment Adjusts the input volume of the microphone sound. The input level is shown at the
right.
Vocal Harmony name
Vocal Harmony Settings
CVP-909/CVP-905 Reference Manual 29
By editing the parameters of the preset Vocal Harmony type, you can create your original Vocal Harmony type.
1Touch the Vocal Harmony name to call up the Vocal Harmony Selection display.
2Select the desired Vocal Harmony type.
3Depending on the selected Vocal Harmony type, edit the relevant settings as
desired.
Harmony
Lets you edit the Vocal Harmony parameters.
Editing the Vocal Harmony Type
Harmony
On/Off
Turns Vocal Harmony on or off.
Mode Although one of the three following Modes is automatically selected when a Vocal
Harmony type is selected, you can change the Mode.
Chordal The harmony notes are determined by the following three chord
types: chords played in the chord section of the keyboard (with
[ACMP ON/OFF] turned on), chords played in the left hand section
of the keyboard (with the Left part turned on), and chords contained
in Song data for controlling the harmony. (Not available if the Song
does not contain any chord data.)
NOTE If you want to apply Vocal Harmony by pressing the chords in the
chord section when the Style is stopped, you need to set the “Stop
ACMP” parameter to a setting other than “Disabled” in the Style
Setting display (page 84).
Vocoder The microphone sound is output via the notes you play on the
keyboard or via the Song playback notes.
Vocoder-Mono Basically the same as the Vocoder. In this mode, only single-note
melodies or lines can be played back (with last-note priority).
(When the Mode is set to “Chordal”)
Chord
Source
Determines which data or event of a Song will be used for chord detection.
•Off: Detects no chord from the Song data.
•XF: Chord data defined via XF will be used.
•1 16: Detects a chord from notes of the MIDI channel specified here.
When the Mode () is set to “Chordal”: When the Mode ( ) is set to “Vocoder” or “Vocoder-Mono”:
Vocal Harmony Settings
CVP-909/CVP-905 Reference Manual 30
Type Determines how the harmony notes are applied to the microphone sound by selecting
one of the Chordal Types. Almost all Types apply the harmony notes based on the chord
specified via the left hand section of the keyboard, chord section of the keyboard, or the
Song data, with the exception of the following two Types. For details, refer to the “Vocal
Harmony Parameter List” in the Data List (separate PDF.)
• ScaleDiatonic: This generates harmony notes based on the Key Root and Key Type
specified in the Harmony Assign display (), meaning that the harmony notes do not
depend on the chord but match the diatonic scale of the current song’s key signature.
• Parallel: This adds a note to the lead note (microphone sound) with the interval
specified at , regardless of the chord.
NOTE “Abv” in the Chordal Type List means that the harmony notes are generated above the lead
note (microphone sound) while “Blw” means that the harmony notes are generated below
the lead note.
For more information about the Chordal Types, refer to “Vocal Harmony Parameter List”
in the Data List (separate PDF).
(When the Mode is set to “Vocoder” or “Vocoder-Mono”)
Song Ch When set to one of 1 – 16, note data (played from a Song on this instrument or the
connected computer) of the corresponding channel is used to control the harmony. When
set to “Off,” Song data control over harmony is turned off.
Part When set to “Mute,” the channel selected above (to control Harmony) is muted (turned
off) during Song playback, allowing you to disable control via specific channels as
desired.
Keyboard •Off:
Keyboard control over harmony is turned off.
•Upper: Notes played to the right of the Split Point control the harmony.
•Lower: Notes played to the left of the Split Point control the harmony.
Balance Lets you set the balance between the lead vocal (the microphone sound) and Vocal
Harmony sound. Raising this value increases the volume of the Vocal Harmony and
decreases that of the lead vocal. When this is set to L<H63 (L: Lead Vocal, H: Vocal
Harmony), only the Vocal Harmony is output; when it is set to L63>H, only the lead vocal
is output.
Balance
adjustment
for each
Lead note
and
Harmony
note
The following parameters can be adjusted for each Lead note (microphone sound) and
Harmony note.
• Transpose/Degree: Lets you shift the pitch for each Harmony note and Lead note.
The range for all notes is the same; however, the lead note can only be adjusted in
octaves. When the Chordal Type is set to “ScaleDiatonic,” this parameter changes to
Degree, letting you shift the pitch in degree from −3 octaves (−22 scale degrees) –
Unison (1 scale degree) – +3 octaves (+22 scale degrees).
•Detune: Determines the fine pitch setting for each Harmony note from −50 cents to
+50 cents.
• Formant: Determines the formant setting for each Harmony note. The higher the
value, the more “feminine” the harmony voice becomes. The lower the value, the more
“masculine” the voice.
•Pan: Determines the pan position setting for each Harmony note. Setting each
Harmony note to a different pan position, with the Lead vocal at center, for example,
results in a naturally wide stereo sound.
•Volume: Determines the volume setting for each Harmony note. Use this to adjust the
relative level balance among the Lead vocal and the Harmony notes.
NOTE When Pitch Correct Mode () is set to OFF the Lead part is not available for the
Transpose/Degree, Detune and Formant parameters.
NOTE The Transpose values of the Harmonies are available only when the Mode ( ) is set to
“Chordal.”
Vocal Harmony Settings
CVP-909/CVP-905 Reference Manual 31
Effect
Lets you edit the parameters related to the Effects applied to the Vocal Harmony notes.
Harmony
Assign
Lets you set how the Harmony notes are assigned or voiced to the Lead note
(microphone sound). For details, refer to “Vocal Harmony Parameter List” in the Data List
(separate PDF).
When the Harmony mode is set to “Chordal”
Session Table: Determines how the harmonies will be voiced, or what type of chord
will be used in creating the harmonies, according to different musical styles.
NOTE This parameter is available only when the Chordal Type is set to something other than
ScaleDiatonic or Parallel.
Key Root, Key Type: When the Chordal Type () is set to “ScaleDiatonic,” this
parameter is available. Harmony notes based on the settings here do not depend on
the chord but match the diatonic scale of the current song’s key signature.
When the Harmony mode is set to “Vocoder” or “Vocoder-Mono”
Transpose Mode: Determines the amount by which the harmony parts are
transposed. A setting of “0” results in no transposition, while the “Auto” setting results in
automatic transposition.
Detail
Setting
Pitch Correct Mode: Corrects the pitch of the Lead note (microphone sound). “Off”
does not correct while “Hard” corrects the pitch most accurately.
• Humanize: This setting allows you to make the Vocal Harmony sounds more natural
and less “electronic,” by introducing slight time discrepancies between the Lead and
Harmony notes.
Off: No Humanize effect.
1: The Humanize effect is applied to the Harmony to create a more natural feel, with an
authentic-sounding widening effect, giving the impression of more people singing.
2: The Humanize effect is applied to the Harmony to produce a more distinct
groove. Even faster passages retain their rhythmic essence.
3: The Humanize effect is applied to the Harmony to reflect the way in which the
lead vocalist and back chorus interact, with the lead vocal out front, and the timing
slightly relaxed.
Lead Pitch Detect Speed, Harm Pitch Detect Speed: Determines how fast the
pitch of the Lead note and the harmony notes are detected in response to the signal via
the microphone. “1” responds most slowly, “4” is standard, “15” responds most quickly,
and “as MIC SETTING” gives priority to the speed specified at the Pitch Detect “Speed”
of the Microphone Setting display (page 27).
Harmony Effect: Determines the Effect type applied to the Harmony notes added to
the Lead note.
Harmony Stability: Determines the stability degree to which the Harmony is applied
to the Lead note. When set to “Stable,” this has a relatively stable sound with little
harmony motion. When set to “Dynamic,” this tends to add harmony with motion
according to the input sound.
Lead Vibrato Depth: This specifies the vibrato depth of the lead sound.
Harm Vibrato Depth: This specifies the vibrato depth of the harmony sound.
•Vibrato Speed: This specifies the vibrato speed of both the lead and harmony
sounds.
•Vibrato Delay: This specifies the vibrato delay of both the lead and harmony sounds.
For more information about the parameters of Detail Settings, refer to “Vocal Harmony
Parameter List” in the Data List (separate PDF).
Effect On/Off
Turns on or off the Effects applied to the Vocal Harmony notes.
Type Selects the Effect type applied to the Vocal Harmony notes. You can edit also the
detailed parameters of the selected type. For details, refer to “Vocal Effect Type List” and
“Vocal Harmony Parameter List” in the Data List (separate PDF).
To Lead Adjusts the Effect depth applied to the Lead note.
To Harmony Adjusts the Effect depth applied to the Harmony notes.
Vocal Harmony Settings
CVP-909/CVP-905 Reference Manual 32
4Touch (Save), then save the edits as an original Vocal Harmony type.
Up to 60 Vocal Harmony types can be saved to User memory. For ease in future recall, you should assign a
descriptive name that matches the settings.
NOTICE
The settings here are lost if you turn off the power without executing the Save operation.
NOTE If you want to save the Vocal Harmony settings to a USB flash drive, save as a User Effect file. To do this, on the display
called up via [Menu] [Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “User Effect” to execute the
Save operation (page 105).
Reverb
Depth
Adjusts the Reverb depth applied to the microphone sound. This setting is equivalent to
that in the Mixer display (page 14).
Chorus
Depth
Adjusts the Chorus depth applied to the microphone sound. This setting is equivalent to
that in the Mixer display (page 14).
CVP-909/CVP-905 Reference Manual 33
Using Playlist
By importing Music Finder Records (.mfd) used on previous Yamaha digital pianos (such as CVP-709, 705
etc.), you can use the Records on the Playlist of this instrument, just like using the Music Finder function on
those other instruments. For details on using Music Finder, refer to the Owner’s Manual of the Yamaha digital
piano which contains your desired Music Finder Records.
1Connect the USB flash drive which contains the Music Finder file (***.mfd) to the
[USB TO DEVICE] terminal.
2On the Playlist display, touch the Playlist file name to call up the Playlist File
Selection display.
3Select the desired Music Finder file to call up a confirmation message.
4Touch [Yes] to start importing.
The imported Music Finder Records will be converted to Registration Memory Bank files and saved to a
folder (with the same name as the imported file) in the User drive of this instrument. At the same time, a
Playlist of the converted Registration Memory Bank files (with the same name as the imported file) will be
created in the USB flash drive. The Music Finder settings are registered to the Registration Memory
number [1] for each Bank.
NOTICE
If a folder with the same name as the Music Finder file already exists, the Registration Memory Bank file with the
same name in that folder will be overwritten by the importing data. To avoid overwriting important data, change the
folder name or the Music Finder file name.
5Turn the [OTS LINK] button on to enable to use of the imported Records in the
same way as the original Music Finder function.
Importing Music Finder Records to the Playlist
Using Playlist
CVP-909/CVP-905 Reference Manual 34
6Touch the Record name on the Playlist display and load the settings contained in
the Music Finder data.
Searching for Records
Since Music Finder data is saved to Registration Memory, you can search for Records on the Registration
Bank Selection display. The keyword and genre of the Music Finder are saved as tag information. For
details about searching or tags, refer to the Owner’s Manual, Chapter 8.
CVP-909/CVP-905 Reference Manual 35
Calling Up Registration Memory Numbers
in Order (Registration Sequence)
For changing the panel setup quickly during a live performance, this instrument features the Registration
Sequence which lets you call up the eight setups in any order you specify, by simply using the ASSIGNABLE
buttons or the pedal as you play.
1On the Home display, touch [] at the upper right corner to show the Registration
area, then touch the area to call up the Registration Bank Selection display.
2Select the desired Registration Memory Bank to create a sequence.
3Call up the Registration Sequence display via [Menu] [RegistSeq].
4Specify how the pedal or ASSIGNABLE button will be used.
If you intend to use a pedal to switch the Registration Memory number, the pedal assigned to “Regist +”
will be used for advancing through the sequence. The pedal assigned to “Regist −” will be used for
reversing through the sequence.
NOTE You can also assign the other functions to the pedal — Punch In/Out of Song (page 89) and the function set in the
Assignable display (page 43). If you assign multiple functions to the pedal, the priority is: Punch In/Out of Song
Registration Sequence the function set in the Assignable display.
If you intend to use the ASSIGNABLE button to switch the Registration Memory number, assign “Regist
+” or “Regist −” in the display called up via [Menu] [Assignable] [Assignable] (page 46).
1
2
47
8
6
5
Indicates the Registration
Memory numbers, in the
order of the current
Registration Sequence.
Current Registration
Bank name
Calling Up Registration Memory Numbers in Order (Registration Sequence)
CVP-909/CVP-905 Reference Manual 36
5Program a Sequence order in which the Registration Memory number is to be
called up.
Basically, press the desired Registration Memory number button on the panel, then touch [Insert] to enter
the selected number.
6Select the action that will result when the Registration Sequence reaches the end.
Stop: Pressing the ASSIGNABLE button or the “advance” pedal has no effect. The sequence is “stopped.”
Top: The sequence starts again at the beginning.
Next: The sequence automatically moves to the beginning of the next Registration Memory Bank in
the same folder.
7Set the Registration Sequence to “On.”
The Registration Sequence programmed here is shown in the Registration area of the Home display.
Press the pedal or the ASSIGNABLE button to check whether or not the Registration Memory number is
called up in the order as programmed.
8Touch (Save) to call up the File Selection display, then save the sequence
program as a Registration Memory Bank file.
NOTICE
Settings in the Registration Sequence display will be lost if you select another Registration Bank without
executing the Save operation.
, , , IMoves the cursor.
NOTE If you want to move the cursor directly to an already entered number, touch the desired
number.
Replace Replaces the number of the cursor location with the currently selected Registration
Memory number.
Insert Inserts the number of the currently selected Registration Memory number before the
cursor position.
Delete Deletes the number at the cursor position.
Clear Deletes all numbers in the sequence.
CVP-909/CVP-905 Reference Manual 37
Disabling Recall of Specific Items
(Registration Freeze)
Registration Memory lets you recall all the panel setups you made with a single button press. However, there
may be times that you want certain items to remain the same, even when switching Registration Memory
setups. For example, you may want to switch Voice settings while keeping the same Style. This is where the
Freeze function comes in handy. It lets you maintain the settings of certain items and leave them unchanged,
even when selecting other Registration Memory buttons.
1Enter the checkmark of the item to be “frozen.”
2Set the Registration Freeze to “On.”
CVP-909/CVP-905 Reference Manual 38
Playing Styles Automatically with Your
Custom Chord Progressions (Chord Looper)
Normally, while playing along with a Style, you play chords in the chord section of the keyboard. However, by
using the Chord Looper function, you can record chord progressions you want to play over, and the Style can
be played back in a loop responding to the chord progression data. For example, if you play the chords C, F, G
and C in order and record it, the Style loops and keeps playing back as “C / F / G / C C / F / G / C ...
without the need for you to play chords in the chord section of the keyboard. This extends your performance
capability, letting you play freely with both your left and right hands.
1Select the desired Style.
As necessary, adjust the tempo.
2Call up the Chord Looper display.
3While playing back a Style, touch [Rec/Stop] on the display.
[Rec/Stop] flashes to indicate recording is in standby. On the next measure of the Style, [Rec/Stop] is
turned on and the recording starts.
NOTE When [Rec/Stop] is turned on, the [ACMP] button is turned on automatically.
NOTE If you turn on [Rec/Stop] while the Style is stopped, the [SYNC START] button is turned on automatically and lets you start
recording when you play a chord in the chord section.
4Play the chords in the chord section, according to the playback tempo of the
Style.
Playing while using Chord Looper
During recording
Playing Styles Automatically with Your Custom Chord Progressions (Chord Looper)
CVP-909/CVP-905 Reference Manual 39
5At the timing just before the measure you want to start loop playback, touch [On/
Off] to stop recording.
[On/Off] flashes to indicate loop playback is in standby. On the next measure of the Style, [On/Off] is
turned on and the Style will be played back in a loop in response to the recorded chord progression.
During loop playback, [On/Off] lights and the [ACMP] button flashes. At this time, chord input in the chord
section is not detected, and the whole keyboard can be used for performance.
6Touch [On/Off] to stop loop playback of the Style, and you can play back the Style
normally by playing chords in the chord section.
Turning on [On/Off] starts loop playback again in response to the chord progressions recorded in steps
3–5.
NOTE The latest chord progression data you recorded is maintained unless you turn the power off or select a Chord Looper
Memory number which contains data. If you want to save the data, go on to step 2 on page 40.
5
During loop playback
Playing Styles Automatically with Your Custom Chord Progressions (Chord Looper)
CVP-909/CVP-905 Reference Manual 40
The recorded chord progression data can be memorized to the Chord Looper Memory locations [1] – [8], and
these eight patterns of data can be saved as a single Chord Looper Bank file.
NOTE The Chord Looper Memory can also be saved (or exported) in single, individual patterns (page 42).
1Record the desired chord progressions (steps 1 – 5 on page 38).
You can stop recording also by turning [Rec/Stop] off or pressing the STYLE CONTROL [ /] (START/
STOP) button, instead of touching [On/Off].
NOTICE
If you select a Chord Looper Memory number which contains the memorized data or turn off the power to the
instrument before going to the next step, the chord progression data you’ve recorded will be lost.
2Confirm the data has been recorded, and then touch [Memory].
If the recorded data exists, the letters of [On/Off] at the right bottom of the display are shown in white.
3Touch the desired Chord Looper Memory number ([1] – [8]) to memorize the chord
progression data.
When the data is memorized, the chord progression is shown in the cell of the selected number. If there
is not enough space to show all the chords, some chords are omitted.
4As necessary, repeat steps 1 – 3.
5Touch (Save) to save the data in the Chord Looper Memory [1] – [8] as a
single Bank file.
NOTICE
If you select another Chord Looper Bank file or turn off the power to the instrument before saving the file, the
memorized data will be lost.
NOTE Each Chord Looper Memory is named automatically such as “CLD_001,” but it can be renamed by exporting the file
(page 42).
Saving the Recorded Data as a Bank File
3
1
5
2
Chord Looper Memory
(Eight data slots are saved as
a single file)
Recorded
data exists
No recorded
data
Playing Styles Automatically with Your Custom Chord Progressions (Chord Looper)
CVP-909/CVP-905 Reference Manual 41
1Touch the Chord Looper Bank name to call up the Chord Looper Bank Selection
display, and select the desired Bank.
2Touch the Chord Looper Memory number you wish to use first.
If you want to start loop playback of the Style from the beginning of your performance, touch and turn on
[On/Off].
3Start playback of the Style and play along with it.
4Turn on [On/Off] just before the measure you want to start loop playback of the
Style.
[On/Off] flashes to indicate loop playback is in standby. On the next measure of the Style, [On/Off] is
turned on and the Style will be played back in a loop.
During loop playback, [On/Off] lights and the [ACMP] button flashes. At this time, chord input in the chord
section is not detected, and the whole keyboard can be used for performance.
5As necessary, change the Chord Looper Memory number or turn loop playback
on/off by touching [On/Off].
Recalling a Chord Looper Bank File and Playing back a Style
in a Loop
2
4
1
Chord Looper Bank file name
Playing Styles Automatically with Your Custom Chord Progressions (Chord Looper)
CVP-909/CVP-905 Reference Manual 42
Each Chord Looper Memory number can be deleted, saved, or recalled one by one. Eight Chord Looper
Memories (progressions) can be saved as a single Bank file.
1Touch the desired action.
2Touch the desired Chord Looper Memory number to execute the action.
3As necessary, touch (Save) to save the edited data as a Chord Looper Bank
file.
NOTICE
If you select another Chord Looper Bank file or turn off the power to the instrument before saving the file, the
edited data will be lost.
If you want to clear all data shown in the Chord Looper display, touch (New Bank) to create a new Bank.
Editing the Chord Looper Bank file
Clear Deletes the data in the specified Chord Looper Memory number.
Import Imports the Chord Looper Memory data saved (or exported) to User memory or USB flash drive to
the specified Chord Looper Memory number.
Export Saves the data in the specified Chord Looper Memory number to User memory or USB flash
drive. The file name is entered automatically, but you can rename it when saving.
2
1
3
CVP-909/CVP-905 Reference Manual 43
Assigning a Specific Function to
Each Pedal or ASSIGNABLE button
You can assign various functions to the three pedals of the instrument, instead of the original functions
(damper, sostenuto and soft). Likewise, various functions can be assigned to the Footswitch or Foot Controller
connected to the [AUX PEDAL] jack.
1Select the function for each pedal.
For information about each function, refer to pages 4445.
NOTE You can also assign other functions to the pedal — Punch In/Out of Song (page 89) and Registration Sequence
(page 35). If you assign multiple functions to the pedal, the priority is: Punch In/Out of Song Registration Sequence
Functions assigned here.
2Touch (Setting), then make the detailed settings of the selected functions.
For each Part, you can turn on or off the selected function and adjust the degree to which the selected
function is applied. Depending on the function selected in Step 1, the available parameters differ, or
(Setting) is grayed out indicating that there is no available parameters.
3If necessary, set the polarity of the footswitch or foot controller connected to the
[AUX PEDAL] jack.
Depending on the Footswitch or Foot Controller, it may work in the opposite way (i.e., pressing it has no
effect, but releasing it does). If such a case occurs, use this setting to reverse the polarity.
4If you change the functions of the Center and Left pedals from the default
settings, turn “Switch With Main Voice(Center & Left)” on or off as desired.
When this is set to off, the function assignments of the Center and Left pedals are maintained even if the
Main Voice is changed (page 50).
Pedal
12
3
4
Assigning a Specific Function to Each Pedal or ASSIGNABLE button
CVP-909/CVP-905 Reference Manual 44
Assignable Pedal Functions
For functions indicated with “*1”, use the right/center/left pedal on the CVP-909 or right pedal on the CVP-905,
or use a foot controller connected to the [AUX PEDAL] jack; proper operation cannot be done with a
footswitch.
For functions indicated with “*2”, they can be assigned also to the ASSIGNABLE [1] – [4] buttons.
Articulation 1 – 3*2 When you use a Super Articulation Voice that has an effect assigned to the pedal/
footswitch, you can enable the effect by pressing the pedal/footswitch.
NOTE Articulation 3 is available only on the CVP-909.
Volume*1 Controls the volume. This function is available only for the foot controller connected to
the instrument’s [AUX PEDAL] jack.
Sustain Controls the sustain. When you press and hold the pedal, all notes played on the
keyboard have a longer sustain. Releasing the pedal immediately stops (damps) any
sustained notes. The “Half Pedal Point” parameter allows you to specify how far down
you should press on the pedal until the damper effect starts working. This can be set for
all pedals on the CVP-909, as well as the right pedal and the foot controller connected
to the [AUX PEDAL] jack on the CVP-905.
Sostenuto Controls the Sostenuto effect. If you play a note or chord on the keyboard and press the
pedal while holding the note(s), the notes will sustain as long as the pedal is held.
However, all subsequent notes will not sustain. This makes it possible to sustain a
chord, for example, while other notes are played staccato.
NOTE This function will not affect any of the Organ Flutes and only some of the Super
Articulation Voices.
Soft Controls the Soft effect. Pressing this pedal reduces the volume and changes the timbre
of the notes you play. This is effective only for certain appropriate Voices. The “Half
Pedal Point” parameter allows you to specify how far down you should press on the
pedal until the soft effect starts working. This can be set for all pedals on the CVP-909,
as well as the right pedal and the foot controller connected to the [AUX PEDAL] jack on
the CVP-905.
Glide When the pedal is pressed, the pitch changes, and then returns to normal pitch when
the pedal is released.
•Up/Down: Determines whether the pitch change goes up (is raised) or down (is
lowered).
•Range: Determines the range of the pitch change, in semitones.
On Speed: Determines the speed of the pitch change when the pedal is pressed.
•Off Speed: Determines the speed of the pitch change when the pedal is released.
Portamento The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). The portamento time can also be adjusted
form the Voice Edit display (page 48). This function does not affect certain Natural
Voices, which would not sound appropriately with this function.
NOTE This function will not affect any of the Organ Flutes, Super Articulation 2 Voices (CVP-909
only) and only some of the Super Articulation Voices.
Pitch Bend*1 Allows you to bend the pitch of notes up or down by using the pedal. This function can
be assigned to all pedals on the CVP-909, as well as the right pedal and the foot
controller connected to the [AUX PEDAL] jack on the CVP-905.
•Up/Down: Determines whether the pitch change goes up (is raised) or down (is
lowered).
•Range: Determines the range of the pitch change, in semitones.
Modulation +/*1 Applies modulation effects, such as vibrato, to notes played on the keyboard. Moreover,
various effects can be added to the Super Articulation Voice. The effect becomes
deeper when pressing down the pedal or foot controller.
Modulation (Alt) +/− Unlike the Modulation above, pressing the pedal or footswitch alternates the on/off
status of the modulation.
Vibe Rotor On/Off *2 Switches the Vibe Rotor on and off when the Insertion Effect Type (page 50) is set to
“VibeRotor” in the “Legacy” category.
Assigning a Specific Function to Each Pedal or ASSIGNABLE button
CVP-909/CVP-905 Reference Manual 45
Organ Rotary Slow/
Fast*2
Switches the Rotary Speaker speed (page 51) between “Slow” and “Fast.”
Keyboard Harmony
On/Off *2
Switches the Keyboard Harmony (page 24) function on and off.
Vocal Harmony On/Off
*2
Switches “Harmony” in the Vocal Harmony display on and off (page 29).
Vocal Harmony Effect
On/Off *2
Switches “Effect” in the Vocal Harmony display on and off (page 31).
Talk On/Off *2 Switches between “Vocal” and “Talk” in the Microphone Setting display (page 26).
Score Page +/−*2 While the Song is stopped, you can turn to the next/previous score page (one page at a
time).
Lyrics Page +/*2 While the Song is stopped, you can turn to the next/previous lyrics page (one page at a
time).
Text Page +/*2 You can turn to the next/previous text page (one page at a time).
Song Play/Pause Same as the SONG CONTROL [ /] (PLAY/PAUSE) button.
Style Start/Stop Same as the STYLE CONTROL [ /] (START/STOP) button.
Tap Tempo Same as the [TAP TEMPO] button.
Synchro Start Same as the [SYNC START] button.
Synchro Stop Same as the [SYNC STOP] button.
Intro 1 – 3 Same as the INTRO [I] – [III] buttons.
Main A – D Same as the MAIN VARIATION [A] – [D] buttons
Fill Down Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate left.
Fill Self Plays a fill-in.
Fill Break Plays a break.
Fill Up Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate right.
Ending 1 – 3 Same as the ENDING/rit. [I] – [III] buttons.
Half Bar Fill In While the pedal is pressed, the “Half bar fill-in” function is turned on and changing
sections of a Style at the first beat of the current section starts the next section from the
middle with automatic fill-in.
Fade In/Out*2 When playing back a Song or Style, this adds smooth fade-ins and fade-outs. To start
playback with a fade-in, turn this function on while playback is stopped, and then start
playback. To stop playback with a fade out, turn this function on during playback.
Fingered/
Fingered On Bass*2
The pedal alternately switches between the Fingered and On Bass modes (page 6).
Bass Hold While the pedal is pressed, the Style bass note will be held even if the chord is changed
during Style playback. If the fingering is set to “AI Full Keyboard,” the function does not
work.
Percussion The pedal plays a percussion instrument selected in the window called up via
(Setting). In this window, you can use the keyboard to select an instrument.
NOTE When you select the percussion instrument by pressing a key on the keyboard, the
velocity with which you press the key determines the percussion volume.
Main Voice On/Off *2 Turns the Main Voice on or off.
Layer Voice On/Off *2 Turns the Layer Voice on or off.
Left Voice On/Off *2 Turns the Left Voice on or off.
OTS +/ Calls up the next/previous One Touch Setting.
Assigning a Specific Function to Each Pedal or ASSIGNABLE button
CVP-909/CVP-905 Reference Manual 46
You can assign a specific function to each of the ASSIGNABLE [1] – [4] buttons, letting you call up often used
functions quickly. Likewise, you can also assign each of the icons shown in the Menu display to each of these
buttons.
1Select the item for each of ASSIGNABLE buttons.
You can assign the icons shown in the Menu display (with the exception of Assignable, Wireless LAN,
Time and Bluetooth), Pedal Functions marked with “*2” (page 44), and the following functions. If you want
no function to be assigned, select “No Assign.”
2If necessary, touch (Setting) then make the detailed settings.
You can turn on or off the specified function for each Part. Depending on the selected function,
(Setting) is grayed out, indicating that there are no available parameters.
Assignable
Left Hold On/Off Turns on or off the Left Hold.
Effect On/Off Turns on or off the Effects.
Mono/Poly Switches between the Mono (in which the Keyboard Voice is played monophonically with
the last note priority) and Poly (in which the Keyboard Voice is played polyphonically).
Depending on the Voice, Portamento may be produced when notes are played with legato.
Regist +/ Calls up the next/previous Registration Memory number of the Registration Sequence.
12
CVP-909/CVP-905 Reference Manual 47
Editing a Voice (Voice Edit)
The Voice Edit feature allows you to create your own Voices by editing some parameters of the existing Voice.
Once you’ve created a Voice, you can save it as a User Voice for future recall. This section covers the editing
of Voices other than Organ Flutes Voices, since the method of editing is different between them. For
instructions on editing Organ Flutes Voices, refer to page 51.
1Select the desired Voice (other than an Organ Flutes Voice).
2On the Voice Edit display called up via [Menu] [VoiceEdit], select the desired
parameter then edit the value.
For information about the editable parameters, refer to page 48.
By touching (Compare) repeatedly, you can compare the sound of the edited Voice with the original
(unedited) Voice.
3Touch (Save) to save the edited Voice.
NOTICE
The settings will be lost if you select another Voice or turn the power to the instrument off without executing the
Save operation.
NOTE If you want to edit another Voice, touch the Voice name at the top of the Voice Edit display. Or, press the VOICE [MAIN/
LAYER/LEFT] button to select the Keyboard part to which the desired Voice is assigned, confirm the Voice name at the
top of the Voice Edit display, make the edits as desired, then execute the Save operation.
Editing a Voice (Voice Edit)
CVP-909/CVP-905 Reference Manual 48
Editable Parameters in the Voice Edit display
Common
Volume Adjusts the volume of the current edited Voice.
Touch
Sensitivity
Depth Adjusts the touch sensitivity (velocity sensitivity), or how greatly the volume
responds to your playing strength.
•Depth: Determines the velocity sensitivity, or how much the level of the Voice
changes in response to your playing strength (velocity).
•Offset: Determines the amount by which received velocities are adjusted for the
actual velocity effect.
Offset
Part Octave Main/Layer Shifts the octave range of the edited Voice up or down in octaves. When the edited
Voice is used as any of the Main and Layer parts, the Main/Layer parameter is
available; when the edited Voice is used as the Left part, the Left parameter is
available.
Left
Mono Mono/Poly Determines whether the edited Voice is played monophonically or polyphonically.
Mono Type Determines the behavior of the notes of decaying sounds, such as a guitar, when
they are played with legato with the edited Voice set to “Mono” above.
•Normal: The next note sounds after the previous note is stopped.
• Legato: The sound of the previously played note is maintained and only the
pitch changes to that of the next note.
•Crossfade: The sound smoothly transitions from the previously played note to
the next note.
NOTE This parameter is unavailable for Super Articulation Voices, Drum/SFX Kit Voices and
Organ Flutes Voices, and behaves the same as the “Normal” setting when these
Voices are selected.
NOTE When Legato is selected, the behavior (other than what is described here) may be
different from Normal, depending on the panel settings.
Portamento
Time
Sets the portamento time (pitch transition time) when the edited Voice is set to
“Mono” above.
NOTE The Portamento Time determines the pitch transition time. Portamento is a function
that creates a smooth transition in pitch from the first note played on the keyboard to
the next.
127
127
64
64
0
64
127
0127
64
Touch Sensitivity Depth
Changes the velocity curve according to
Velocity Depth (with Offset set to 64)
Touch Sensitivity Offset
Changes to velocity curve according to Velocity
Offset (with Depth set to 64)
Actual Velocity for
tone generator
Depth = 127 (twice)
Depth = 64 (normal)
Depth = 32 (half)
Depth = 0
Received Velocity
(Actual Key-on speed)
Actual Velocity for
tone generator
Depends on
offset
Depends on
offset
Offset = 96 (+64) Offset = 127 (+127)
Offset = 64
(normal)
Offset = 32 (−64)
Received Velocity
(Actual Key-on speed)
Offset = 0 (−127)
Editing a Voice (Voice Edit)
CVP-909/CVP-905 Reference Manual 49
Sound
Filter Filter is a processor that changes the timbre or tone of a sound by either blocking or passing a specific
frequency range. The parameters below determine the overall timbre of the sound by boosting or cutting
a certain frequency range. In addition to making the sound either brighter or mellower, Filter can be
used to produce electronic, synthesizer-like effects.
Brightness Determines the cutoff frequency or effective
frequency range of the filter (see diagram).
Higher values result in a brighter sound.
Harmonic
Cont.
(Harmonic
Content)
Determines the emphasis given to the cutoff
frequency (resonance), set in Brightness
above (see diagram). Higher values result in
a more pronounced effect.
EG The EG (Envelope Generator) settings determine how the
level of the sound changes in time. This lets you reproduce
many sound characteristics of natural acoustic instruments
— such as the quick attack and decay of percussion sounds,
or the long release of a sustained piano tone.
Attack Determines how quickly the sound reaches its maximum level after the key is played.
The lower the value, the quicker the attack.
Decay Determines how quickly the sound reaches its sustain level (a slightly lower level than
maximum). The lower the value, the quicker the decay.
Release Determines how quickly the sound decays to silence after the key is released. The
lower the value, the quicker the decay.
Vibrato Vibrato is a quavering, vibrating sound effect that is produced
by regularly modulating the pitch of the Voice.
Depth Determines the intensity of the Vibrato effect. Higher settings result in a more
pronounced Vibrato.
Speed Determines the speed of the Vibrato effect.
Delay Determines the amount of time that elapses between the playing of a key and the start
of the Vibrato effect. Higher settings increase the delay of the Vibrato onset.
Modulation
(+)/(−)
When the Modulation function is assigned to a pedal (page 44), the pedal can be used to modulate the
parameters below as well as the pitch (vibrato). Here, you can set the degree to which the pedal
modulates each of the following parameters.
Filter Determines the degree to which the pedal modulates the Filter Cutoff Frequency. For
details about the filter, refer to page 49.
Volume
Cutoff Frequency
These frequencies are
“passed” by the filter.
Cutoff
range
Frequency
(pitch)
Frequency (pitch)
Volume
Resonance
Level
Attack Decay Release
Sustain
Level
Key-on Key-off
Time
Pitch Speed
Delay
Depth
Time
Editing a Voice (Voice Edit)
CVP-909/CVP-905 Reference Manual 50
*Reverb and Chorus depth cannot be edited when a VRM Voice is selected, but can be edited via [Menu] [VoiceSetting]
[Piano] (page 1/2). For details, refer to page 79.
Determines the Frequency and Gain of the EQ bands. For information about EQ, refer to page 11.
From this display, you can set the same parameters as those in the Keyboard Harmony display (step 2 on
page 24). Before making any settings, make sure that the current part is set to Main; in other words, you
should select the Main part by touching the Voice name at the top of the Voice Edit display, or by pressing the
VOICE [MAIN/LAYER/LEFT] button. The settings here are called up automatically simply by selecting the
corresponding Voice.
This section allows you to select the function to be assigned to the center or left pedal. Before making any
settings, make sure that the current part is set to Main; in other words, you should select the Main part by
touching the Voice name at the top of the Voice Edit display, or by pressing the VOICE [MAIN/LAYER/LEFT]
button. The settings here are called up automatically simply by selecting the corresponding Voice. For details
about the pedal function, refer to page 44.
Modulation
(+)/(−)
Amplitude Determines the degree to which the pedal modulates the amplitude (volume).
LFO Pitch Determines the degree to which the pedal modulates the pitch, or the vibrato effect.
LFO Filter Determines the degree to which the pedal modulates the Filter cutoff frequency, or the
wah effect.
LFO
Amplitude
Determines the degree to which the pedal modulates the amplitude, or the tremolo
effect.
Effect
Insertion
Effect
On/Off Turns the Insertion Effects on or off.
Type Selects the Insertion Effect Type. Select the Category then select the Type. You can
adjust the detailed parameters by touching (Setting) and save them. Refer to
“Editing and Saving the Effect settings” (page 13) for details.
Depth Adjusts the Insertion Effect Depth.
Vibe
Rotor
Available only if “VibeRotor” in the “Legacy” category is selected as the Insertion Effect
Type explained above. Determines whether Vibe Rotor should be set to on or off when
selecting the Voice.
Reverb* Depth Adjusts the Reverb Depth.
Chorus* Depth Adjusts the Chorus Depth.
EQ
Keyboard Harmony
Pedal
CVP-909/CVP-905 Reference Manual 51
Editing an Organ Flutes Voice
(Voice Edit)
The Organ Flute Voices can be edited by adjusting the footage levers, adding the attack sound, applying effect
and equalizer, etc.
1Select the desired Organ Flutes Voice.
From the [Organ] Category, touch [Organ Flutes], then select the desired Organ Flutes Voice.
2On the Voice Edit display called up via [Menu] [VoiceEdit], select the desired
parameter then edit the value.
NOTE The Voice Edit display for the Organ Flutes Voices can also be called up by touching the Organ Flutes icon at upper right
of the Organ Flutes Voice name in the Home display. This is useful for adjusting footage settings and controlling the rotary
speaker while you play.
There are three types for Organ Flutes Voices and the parameters indicated by “*” are available only for
the Vintage and Home type. For details about the organ types, refer to the Owner’s Manual, Chapter 3.
Volume Adjusts the overall volume of the Organ Flutes.
Rotary/
Tremolo*
Alternately switches the Rotary Speaker speed between “Slow” and “Fast.” This
parameter is available only when an effect (page 12) which contains “Rotary” in its
name is applied.
Vibrato* Turns on or off the vibrato, and adjusts its depth and speed.
Response Affects both the attack and release (page 49) portion of the sound, increasing or
decreasing the response time of the initial swell and release, based on the Footage
controls. The higher the value, the slower the swell and release.
Attack Selects “First” or “Each” as the Attack mode and adjusts the Attack length of the
sound.
In the First mode, attack (percussive sound) is applied only to the first notes played
and held simultaneously; while the first notes are held, any subsequently played
notes have no attack applied. In the Each mode, attack is applied equally to all notes.
The Attack length produces a longer or shorter decay immediately after the initial
attack. The longer the value, the longer the decay time.
Footage Determines the basic sound of the organ flutes.
Editing an Organ Flutes Voice (Voice Edit)
CVP-909/CVP-905 Reference Manual 52
3As necessary, touch (Setting) then set the parameters related to the Effects
and EQ.
The parameters are same as those in the Effect display and EQ display of the previous chapter “Editing a
Voice (Voice Edit)” (page 50).
4Touch (Save) to save the created Organ Flutes Voice.
NOTICE
The settings will be lost if you select another Voice or turn the power to the instrument off without executing the
Save operation.
NOTE If you want to edit another Voice, touch the Voice name at the top of the Voice Edit display. Or, press the VOICE [MAIN/
LAYER/LEFT] button to select the Keyboard part to which the desired Voice is assigned, confirm the Voice name at the
top of the Voice Edit display, make the edits as desired, then execute the Save operation.
CVP-909/CVP-905 Reference Manual 53
Creating/Editing Styles
(Style Creator)
The Style Creator function lets you create an original Style by recording the rhythm pattern via the keyboard
performance and using the already-recorded Style data. Basically, select a preset Style that is closest to the
type you want to create, then record the rhythm pattern, bass line, chord backing, or phrase (referred to as
“Source Pattern” in the Style Creator) for each channel of each Section. Like the Song, two Recording
methods are available: Realtime Recording and Step Recording (page 54).
Style Data Structure – Consisting of Source Patterns
A Style is made up of different Sections (Intro, Main, Ending, etc.) and each Section has eight separate
channels, each of which is referred to as a “Source Pattern.” With the Style Creator feature, you can create a
Style by separately recording the Source Pattern for each channel, or by importing pattern data from other
existing Styles.
Main A
Main B
Fill In
Intro
Ending 2
Ending 3
Rhythm 1
Rhythm 2
Bass
Chord 1
Chord 2
Pad
Phrase 1
Phrase 2
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Recording or copying from another Style
Creating a Source
Pattern for each channel
separately
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 54
Basic Procedure for creating a Style
The detailed instructions are described on the reference page of each step.
1Select the desired Style as starting data.
2Call up the Style Creator display via [Menu] [StyleCreator].
3On the “Basic” display, select a Section (page 55).
As necessary, make the following settings.
If you create a Style entirely from scratch, touch [Initialize Style] to make the current Style empty.
If you initialize the Style, set the length (measure amount) of the Source Pattern.
Set the overall parameters such as Tempo and Beat.
4Create the Source Pattern for each channel.
Realtime Recording (page 56)
Lets you record the Style by simply playing the keyboard.
Step Recording (page 59)
Lets you enter each note individually.
Style Assembly (page 59)
Lets you copy various patterns from other preset Styles or Styles you have already created.
5Edit the already recorded channel data.
Channel Edit (page 60)
Lets you edit the MIDI data of the already recorded channels.
SFF Edit (page 62)
Lets you edit the SFF (Style File Format) related parameters of the already recorded channels other than
Rhythm channels.
6Repeat steps 3 – 5 as desired.
7Touch (Save) at the top of the display to save the created Style.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 55
The explanations here apply to step 3 on page 54. This display lets you set the basic parameters such as
Section selection.
Basic
Section Selects a Section for creating or editing.
Pattern Length Selects the length (in measures) of the current Section. After inputting the value, touch [Execute]
to actually enter the changes.
Tempo Sets the tempo of the Style. The setting here commonly applies to all Sections.
Beat Sets the beat of the Style. The setting here commonly applies to all Sections. After inputting the
value, touch [Execute] to actually enter the changes.
Initialize Style Initializes all channel data of all Sections belonging to make the current Style empty. Touch here
when you want to create the Style data from scratch.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 56
The explanations here apply to step 4 on page 54. In the “Rec Channel” display, you can create the channel
data via the Realtime Recording.
Recording Rhythm Channels 1 – 2
1On the “Rec Channel” display, touch and hold the desired channel until it turns
red.
The selected channel becomes the Recording target whether the channel already contains data or not. If
recorded data is already included, you should record the additional notes to the selected channel as
Overdub Recording.
2If necessary, select a Voice then practice the rhythm pattern to be recorded.
Touch the instrument icon (illustration) to call up the Voice Selection display then select the desired Voice
such as Drum Kit. After selecting, touch [Close] to return to the original display. With the selected Voice,
practice the rhythm pattern to be recorded.
Realtime Recording
Realtime Recording Characteristics in the Style Creator
Loop Recording
Style playback repeats the rhythm patterns of several measures in a “loop,” and Style recording is also done using
loops. For example, if you start recording with a two-measure Main section, the two measures are repeatedly
recorded. Notes that you record will play back from the next repetition (loop), letting you record while hearing
previously recorded material.
Overdub Recording
This method records new material to a channel already containing recorded data, without deleting the original data. In
Style recording, the recorded data is not deleted, except when using functions such as “Clear Drum Inst” (page 57)
“Delete” (pages 57, 58) and “Remove Event” (page 61). For example, if you start recording with a two-measure Main
section, the two measures are repeated many times. Notes that you record will play back from the next repetition,
letting you overdub new material to the loop while hearing previously recorded material. When creating a Style based
on an existing internal Style, overdub recording is applied only to the rhythm channels. For all other channels (except
rhythm), you need to delete the original data before recording.
Available Voices for recording
For the Rhythm1 channel, any except Organ Flutes Voices can be used for recording.
For the Rhythm2 channel, only Drum/SFX kits can be used for recording.
1
2
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 57
3Press the STYLE CONTROL [ /] (START/STOP) button to start recording.
Since already recorded data plays back, turn each channel on or off by touching as desired.
If necessary, delete a channel by touching [Delete] located under the desired channel.
4As soon as loop playback returns to the first beat in the first measure, start
playing the rhythm pattern to be recorded.
If the rhythm is difficult to play all at once, you can break it down into isolated parts, such as in this example:
If you make a mistake or play any wrong notes:
You can delete notes of a specific drum instrument. Touch [Clear Drum Inst] to call up a message, then
press the corresponding key on the keyboard while the message is shown. After deleting the desired
drum instrument, touch [Exit] to close the message.
5Press the STYLE CONTROL [ /] (START/STOP) button to stop playback.
If you want to add more notes, press the [ /] (START/STOP) button again to continue recording.
6Touch and hold the Recording channel for a while (until the button changes
color) to exit from the Recording mode.
Recording Bass, Chord 1 – 2, Pad and Phrase 1 – 2
1On the “Rec Channel” display, touch and hold the desired channel until it turns
red.
If the selected channel already contains data, a confirmation message appears, prompting you whether
or not to delete the existing data of the selected channel. Touch [Yes] to delete data and the selected
channel is specified as Record target. Note that channel data other than the Rhythm channels of the
preset Style cannot be overdubbed.
2If necessary, select a Voice, and then practice the bass line, chord backing, or
phrase to be recorded.
Touch the instrument icon (illustration) to call up the Voice Selection display, and then select the desired
Voice. After selecting, touch [Close] to return to the original display. With the selected Voice, practice the
phrase or chord backing to be recorded.
Loop 1st round
Bass Drum
Loop 2nd round
Snare Drum
Bass Drum
Loop 3rd round
Hi-Hat
Snare Drum
Bass Drum
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 58
Record a phrase in the key of C major (CM7) which will play appropriate notes
as change chords during performance
Guidelines for recording a Main or Fill-in
With the default initial settings, the Source Root/Chord is set to CM7. This means that you should record
a Source Pattern which is to be triggered by specifying CM7 during normal performance. Record a bass
line, phrase or chord backing which you want to hear when CM7 is specified. Specifically, see the
guidelines below.
Use the notes from the C Ionian scale, which is the primary chord scale of CM7 in the key of C Major—
excepting the following notes, which should be avoided:
- “F” (4th)
- “D” (tension 9th, which doesn’t work with chords with “b9th or “#9th” in the Style engine)
In other words, use only the notes C, E, G, A, and B (Root, 3rd, 5th, 6th or 13th and Maj7th).
Use only the chord tones when recording the Chord and Pad channels (i.e., C, E, G, and B).
If you observe these guidelines, Style playback notes are appropriately converted depending on the
chord changes you make during your performance.
Guidelines for recording an Intro or Ending
These Sections are designed assuming that the chord is not changed during playback. This is why you
need not observe the guidelines for Main and Fill-in Sections described above, and you can make the
chord progression in recording. However, you should follow the guidelines below to ensure that your
phrases work well in common situations, since the Source Root/Chord is set to CM7 by default.
When recording the Intro, make sure that the phrase with the chord progression you record leads
properly into the its tonic chord at the end of the Intro. For example, in the key of C Major, the G7 chord
is commonly used, since it strongly leads back into the tonic chord of the key of C Major.
When recording the Ending, make sure that the phrase with the chord progression you record resolves
to the original key at the beginning of the Ending. Recommended chords, which resolve to the key
smoothly, are the diatonic chords (i.e., CM7, Dm7, Em7, FM7, G7, Am7, and Bm7(b5) in the key of C
Major).
Set the Source Root/Chord if necessary
Although the default Source Root/Chord is set to CM7 as described above, you can change this to any
desired one in which you can play easily. Call up the “SFF Edit” display, set the Source Root and Chord to
the favorite or desired Root and Chord type. Keep in mind that when you change the Source Chord from
the default CM7 to another chord, the chord notes and recommended notes will also change. For details,
refer to page 63.
3Press the STYLE CONTROL [ /] (START/STOP) button to start recording.
With the already recorded data playing back, turn each channel on or off by touching as desired.
If necessary, delete a channel by touching [Delete] located under the desired channel.
4As soon as loop playback returns to the first beat in the first measure, start
playing the bass line, chord backing or phrase to be recorded.
5Press the [ /] (START/STOP) button to stop playback.
If you want to add more notes, press the [ /] (START/STOP) button again to continue recording.
To hear the playback sound of the already recorded channels with another
Source Chord/Root:
1) Call up the “SFF Edit” display, then set the “Target Ch” at the top of the display to “Rhythm1” or “Rhythm2.”
2) Touch [Play Root/Chord] to call up the operation display.
3) Press the STYLE CONTROL [ /] (START/STOP) button to start playback.
Available Voices for recording
Any Voices except for the Organ Flutes/Drum kit/SFX kit Voices can be used for recording.
C C C R C
C = Chord tones
R = Recommended notes
* When recording the Source Pattern, you should use the “C” and “R” notes based on the above, and avoid the others.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 59
4) On the display, set the “Play Root/Chord” to the desired Chord root and Chord type.
This operation lets you hear how the Source Pattern is played back via chord changes during normal
performance.
6Touch and hold the Recording channel for a while (until the button changes
color) to exit from the Recording mode.
The explanations here apply to step 4 on page 54. In the Step Recording (Style Edit) display called up by
touching (Edit) at the upper right of the display, you can record or edit notes one by one. This Step
Recording procedure is essentially the same as that for Song Recording (page 67) with the exception of the
points listed below:
In the Song Creator, the “End” mark position can be changed freely; in the Style Creator, it cannot be
changed. This is because the length of the Style is fixed for all channels as you set in the “Basic” display
(page 55). For example, if you create a Style of four measures length, the “End” mark position is
automatically set to the end of fourth measure, and cannot be changed in the Style Edit display.
Recording channels can be changed in the Song Creator’s Edit display; however, they cannot be changed
in the Style Creator. Select the Recording channel in the “Rec channel” display.
In the Style Creator, Chord, Lyrics, and System Exclusive data cannot be entered. The Channel data can be
entered and System Exclusive data can be edited (delete, copy or move).
The explanations here apply to step 4 on page 54. The “Assembly” display shows that each channel data of
the current Section has been copied from which Style, which Section, and which channel. For each channel,
touch the Style name, Section name, or Channel name in the “Copy From” section as necessary to select the
desired one. Assemble the Style while listening to the Style playback by pressing the STYLE CONTROL [ /
] (START/STOP) button. You can turn each channel on or off by touching the channel button.
Step Recording
Assembly — Assigning the Source Pattern to Each Channel
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 60
The explanations here apply to step 5 on page 54. The “Channel Edit” display lets you edit the already
recorded channel data. Select the Target channel then edit the desired parameters.
After editing the desired parameter, touch [Execute] to actually enter the edits for each setup window. When
execution is completed, this button changes to [Undo], letting you restore the original data if you are not
satisfied with the results. The Undo function only has one level; only the previous operation can be undone.
Channel Edit
Target Ch Select the target channel to be edited. All items with the exception of the “Groove” are to be applied to
the channel specified here.
Groove This lets you add swing to the music or change the “feel” of the beat by making subtle shifts in the
timing (clock) of the Style. The Groove settings are applied to all channels of the selected Section.
Original Beat Specifies the beats to which Groove timing is to be applied. In other words, if “8
Beat” is selected, Groove timing is applied to the 8th notes; if “12 Beat” is
selected, Groove timing is applied to 8th-note triplets.
Beat Converter Actually changes the timing of the beats (specified in the “Original Beat”
parameter above) to the selected value. For example, when Original Beat is set
to “8 Beat” and Beat Converter is set to “12,all 8th notes in the section are
shifted to 8th-note triplet timing. The “16A” and “16B” Beat Converter which
appear when Original Beat is set to “12 Beat” are variations on a basic 16th-
note setting.
Swing Produces a “swing” feel by shifting the timing of the back beats, depending on
the “Original Beat” parameter above. For example, if the specified Original Beat
value is “8 Beat”, the Swing parameter will selectively delay the 2nd, 4th, 6th,
and 8th beats of each measure to create a swing feel. The settings “A” through
“E” produce different degrees of swing, with “A” being the most subtle and “E”
being the most pronounced.
Fine Selects a variety of Groove “templates” to be applied to the selected section.
The “Push” settings cause certain beats to be played early, while “Heavy”
settings delay the timing of certain beats. The numbered settings (2, 3, 4, 5)
determine which beats are to be affected. All beats up to the specified beat —
but not including the first beat — will be played early or delayed (for example,
the 2nd and 3rd beats, if “3” is selected). In all cases, “A” types produce
minimum effect, “B” types produce medium effect, and “C” types produce
maximum effect.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 61
Dynamics This changes the velocity/volume (or accent) of certain notes in the Style playback. The Dynamics
settings can be applied to each channel individually or all channels of the selected Style.
Accent Type Determines the type of accent applied — in other words, which notes are
emphasized.
Strength Determines how strongly the selected Accent Type (above) will be applied. The
higher the value, the stronger the effect.
Expand/
Compress
Expands or compresses the range of velocity values. Values higher than 100%
expand the dynamic range, while values lower than 100% compress it.
Boost/Cut Boosts or cuts all velocity values. Values above 100% boost the overall velocity,
while values below 100% reduce it.
Apply To All
Channels
When set to “On,” the settings in this display will be applied to all the channels of
the current Section.
When set to “Off,” the settings in this display will be applied to the channel
specified at the “Target Ch” in the Channel Edit display.
Quantize Same as in the Song Creator (page 76), with the exception of the two additional available parameters
below.
Eighth notes with swing
Sixteenth notes with swing
Velocity Boosts or cuts the velocity of all notes in the specified channel, according to the percentage specified
here.
Bar Copy This function allows data to be copied from one measure or group of measures to another location
within the specified channel.
Source Top Specifies the first (Source Top) and last (Source Last) measures in the region to
be copied.
Source Last
Destination Specifies the first measure of the destination location, to which the data is to be
copied.
Bar Clear This function clears all data from the specified range of measures within the selected channel.
Remove
Event
This function lets you remove specific events from the selected channel.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 62
The explanations here apply to step 5 on page 54. The Style File Format (SFF) combines all of Yamaha’s
Style playback know-how into a single unified format. Setting the SFF related parameters determines how the
original notes are converted to the actual sounded notes based on the chord you specify in the Chord area of
the keyboard. The conversion flow is shown below.
The parameters shown above can be set in the “SFF Edit display.
SFF Edit — Making Style File Format Settings
Source Pattern settings
Source Root
Source Chord
Determines what key and what chord type are used for playing.
Note Conversion from the Source Pattern
NTR (Conversion via the Chord Root change)....... page 63
NTT (Conversion via the Chord Type change) ....... page 64
Octave Setting of the Converted Notes
High Key (Upper octave limit of the Note Transposition)
Note Limit (Note range between the highest and lowest notes)
Others
RTR (How the note pitch changes in response to chord changes)
Set these parameters
before recording.
Set these parameters
after recording.
Actual Sounded Notes
Chord changes during normal performance
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 63
Target Ch Select the target channel to be edited.
Source Root/
Chord
(Play Root/
Chord)
These settings determine the original key of the Source Pattern (i.e., the key used when recording
the pattern to the channel other than the Rhythm channels). If you set “Fm7” here, specifying “Fm7”
in the Chord section of the keyboard will play back the originally recorded data (Source Pattern). The
default setting is “CM7” (Source Root = C and Source Chord = M7). Depending on the selected
chord type specified here, the playable notes (scale notes and chord notes) differ. When “Initialize
Style” is executed in the “Basic” display, the default setting of CM7 is automatically selected.
IMPORTANT
Make sure to set the parameters here before recording. If you change the settings after recording,
the recorded Source Pattern cannot be converted to the appropriate notes when changing the
chord during your keyboard performance.
NOTE When the parameters for the selected Target Ch are set to NTR: Root Fixed, NTT Type: Bypass, or NTT
Bass: Off, the parameters here are changed to “Play Root” and “Play Chord,” respectively. In this case,
you can change chords and hear the resulting sound for all channels.
NOTE The settings here are not applied when NTR is set to “Guitar.”
NTR/NTT
(Note
Transposition
Rule/Note
Transposition
Table)
The parameters here determine how the notes in the Source Pattern are converted according to the
chord changes during your keyboard performance.
NTR Selects the Note Transposition Rule which determines how the notes in the Source
Pattern are transposed according to the Chord Root change.
Root Trans When the root note is transposed, the interval between notes is
maintained. For example, the notes C3, E3 and G3 in the key of C
become F3, A3 and C4 when they are transposed to F. Use this setting
for channels that contain melody lines.
Root Fixed The note is kept as close as possible to the previous note range. For
example, the notes C3, E3 and G3 in the key of C become C3, F3 and A3
when they are transposed to F. Use this setting for channels that contain
chord parts.
Guitar This is exclusively for transposing guitar accompaniment. Notes are
transposed to approximate voicings played with natural guitar fingering.
CR CR
C
Cm
CR CCR
C
Cm 6
CCR
CC
Cm 7
CR
RRCCC
Cm 5
7
CC RC
CC
7
Cm (9)
CR CC
CC
7
Cm (11)
CR C CR
C
CmM 7
CC RC
C
Cm add9
CCC
C
7
C
CC RC C
C
7
CmM (9)
CR
CCR
Cdim
CR R RC
CCR
Cdim 7
CCC C
C
C(9)
7
CRC
CC
C 5
7
CRC CR
CC
C11
7
CCC
C
C sus 4
7
CRC CR
CMaj
CCCCR
CM7
CCC C CR
7
CM (9)
CCC C RC
C(9)
6
CRC
RCR
Caug
CRC C RC
C6
CRC C CR
C
7
CM 11
CCC CR
Cadd9
CRC CC
C
C(13)
7
CCC
CC
C(9)
7
C
C1+8
CC
C1+5
CCC
RCC
C(9)
7
CRC
RCC
C aug
7
CRC CRR
C
CM aug
7
CCCR
RCC
C(13)
7
CR CC
Csus 4
CCR CR
Csus 2
Playable notes when Source Root is C:
C = Chord tones
R = Recommended notes
* When recording the Source Pattern, you should create it using the C and R notes.
When playing a
C major chord.
When playing an
F major chord.
When playing a
C major chord.
When playing an
F major chord.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 64
NTR/NTT
(Note
Transposition
Rule/Note
Transposition
Table)
NTT
Type
Selects the Note Transposition Table which determines how the notes in the Source
Pattern are transposed according to the Chord Type change.
When NTR is set to “Root Trans” or “Root Fixed”:
Bypass When NTR is set to Root Fixed, the transposition table used does not do
any note conversion. When NTR is set to Root Trans, the table used only
converts the notes by maintaining the pitch relationship between notes.
Melody Suitable for melody line transposition. Use this for melody channels such
as “Phrase1” and “Phrase2.”
Chord Suitable for chordal parts transposition. Use this for the “Chord1” and
“Chord2” channels, especially when they contain piano or guitar-like
chordal parts.
Melodic
Minor
When the played chord changes from a major to a minor chord, this table
lowers the third interval in the scale by a semitone. When the chord
changes from a minor to a major chord, the minor third interval is raised by
a semitone. Other notes are not changed. Use this for melody channels of
Sections which respond only to major/minor chords, such as Intros and
Endings.
Melodic
Minor 5th
In addition to the Melodic Minor transposition above, this table
transposes the perfect fifth note above the “Source Root” with augmented
and diminished chord types.
Harmonic
Minor
When the played chord changes from a major to a minor chord, this table
lowers the third and sixth intervals in the scale by a semitone. When the
chord changes from a minor to a major chord, the minor third and flatted
sixth intervals are raised by a semitone. Other notes are not changed. Use
this for chord channels of Sections which respond only to major/minor
chords, such as Intros and Endings.
Harmonic
Minor 5th
In addition to the Harmonic Minor transposition above, this table
transposes the perfect fifth note above the “Source Root” with augmented
and diminished chord types.
Natural
Minor
When the played chord changes from a major to a minor chord, this table
lowers the third, sixth and seventh intervals in the scale by a semitone.
When the chord changes from a minor to a major chord, the minor third,
flatted sixth and flatted seventh intervals are raised by a semitone. Other
notes are not changed. Use this for chord channels of Sections which
respond only to a major/minor chord such as Intros and Endings.
Natural
Minor 5th
In addition to the Natural Minor transposition above, this table transposes
the perfect fifth note above the “Source Root” with augmented and
diminished chord types.
Dorian When the played chord changes from a major to a minor chord, this table
lowers the third and seventh intervals in the scale by a semitone. When
the chord changes from a minor to a major chord, the minor third and
flatted seventh intervals are raised by a semitone. Other notes are not
changed. Use this for chord channels of Sections which respond only to a
major/minor chord such as Intros and Endings.
Dorian 5th In addition to the Dorian transposition above, this table transposes the
perfect fifth note above the “Source Root” with augmented and
diminished chord types.
When NTR is set to “Guitar”:
All Purpose This table covers both strummed and arpeggio-played sounds.
Stroke Suitable for strumming sounds of the guitar. Some notes may sound as if
they are muted—this is the normal condition when chords are played on
guitar by strumming.
Creating/Editing Styles (Style Creator)
CVP-909/CVP-905 Reference Manual 65
NTR/NTT
(Note
Transposition
Rule/Note
Transposition
Table)
NTT
Type
Arpeggio Suitable for arpeggio-played sound of the guitar, resulting in beautiful
four-note arpeggio sounds.
NTT
Bass
The channels for which this parameter is set to “On” respond to slashed (on-bass) chords.
For example, when Dm7/G is selected, the notes for Bass are transposed to “G” instead of
“D” which is the root of the chord. When NTR is set to Guitar and this parameter is set to
“On,” only the bottom note as Bass inside the Guitar voicings automatically respond to
slashed chords as well.
NTR/NTT Settings for the Rhythm Channels
Since the Rhythm channels should not be affected by Chord change, make sure to make the
following settings.
NTR = Root Fixed
NTT = Bypass
NTT Bass = Off
With the above settings, the “Source Root” and “Source Chord” parameters are changed to “Play
Root” and “Play Chord,” respectively.
High Key/Note
Limit
Adjusts the Octave of the notes converted via the NTT and NTR.
High Key This sets the highest key (upper octave limit) of the note transposition for
the chord root change. Any notes calculated to be higher than the highest
key are transposed down to the next lowest octave. This setting is
available only when the NTR parameter (page 63) is set to “Root Trans.
Note Limit Low These set the note range (highest and lowest notes) for Voices recorded
to the Style channels. By judicious setting of this range, you can ensure
that the Voices sound as realistic as possible — in other words, that no
notes outside the natural range are sounded (e.g., high bass sounds or
low piccolo sounds).
Note Limit High
RTR
(Retrigger
Rule)
These settings determine whether notes stop sounding or not and how they change pitch in
response to chord changes.
Stop The notes stop sounding.
Pitch Shift The pitch of the note will bend without a new attack to match the type of
the new chord.
Pitch Shift to Root
The pitch of the note will bend without a new attack to match the root of
the new chord. However, the octave of the new note remains the same.
Retrigger The note is retriggered with a new attack at a new pitch corresponding to
the next chord.
Retrigger To Root The note is retriggered with a new attack at the root note of the next
chord. However, the octave of the new note remains the same.
Root changes
Notes played
Example — When the highest key is F
Root changes
Notes played
Example — When the lowest note is C3 and the highest is D4
High Limit
Low Limit
CVP-909/CVP-905 Reference Manual 66
Creating/Editing MIDI Songs
(Song Creator)
The Owner’s Manual covers how to create an original Song by recording your keyboard performance (see
instructions of Realtime Recording). This Reference Manual shows how to create an original Song by entering
notes one by one (instructions of the Step Recording) and how to improve the already created Song by editing
the detailed parameters.
Realtime Recording and Step Recording
When creating a Song, these two Recording methods are available. With Realtime Recording, this instrument
records the performance data as it is played. With Step Recording, you can compose your performance by
“writing” it down one event at a time. For instructions about the Realtime Recording, refer to the Owner’s
Manual, Chapter 6. As the method of re-recording a specific part of a Song in realtime, you can use the Punch
In/Out function (page 89).
This chapter covers mainly the instructions of Step Recording.
MIDI Song Data Structure
A MIDI Song consists of 16 MIDI channels. You can create data of a MIDI Song by recording your
performance to a specific channel or channels in realtime, or by executing Step Recording.
Song
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
System Exclusive
Lyrics
Recording Part
(default settings)
Main
Left
Layer
Rhythm 1
Rhythm 2
Bass
Chord 1
Chord 2
Pad
Phrase 1
Phrase 2
Keyboard Performance
Realtime Recording:
By default, your keyboard performance will be
recorded to MIDI channels 1 – 3. You can also
record additional performances to channels 4
8.
•Step Recording:
Without specifying the keyboard part, you can
input the melodies or notes from sheet music
one by one to the desired channel.
Style Playback
Realtime Recording:
By default, Style playback will be recorded to
MIDI channels 9 – 16.
•Step Recording:
After inputting the Chord change/Section
change events, touch [Expand] to actually
record the note data to MIDI channels 9 – 16.
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 67
Basic Procedure for creating a Song
This section covers the basic procedure for Step Recording.
1Select the desired Song or create a new empty Song.
To create an empty Song, press the [ ] (REC) button, then touch [New MIDI] and [Cancel] in order.
2Call up the Song Creator display via [Menu] [SongCreator].
3Touch (Edit) at the top of this display to call up the Song Edit display.
4Touch [Ch1] at the top left of this display to select the Recording Target channel.
If you want to record the keyboard performance, select one of “Ch1” – “Ch8. If you do not intend to use Style
playback for the Song, “Ch9” – “Ch16” can be selected.
If you want to edit the System Exclusive data, select “SysEx.”
If you want to edit Lyrics, select “Lyrics.”
If you want to record Style playback (Chord change and Section change events), select “Chord.”
5According to selection in step 4, execute the Step Recording or data edits.
When one of “Ch1”“Ch16” is selected:
For instructions on editing already recorded data, refer to page 73.
For instructions on inputting melodies via Step Recording, touch [Step Rec] at the bottom left of the
display then refer to page 68.
When “SysEx” is selected:
Edit the already recorded data, following the explanations on page 73. Step Recording is not available.
When “Lyrics” is selected:
Edit the already recorded data, following the explanations on page 73. Step Recording is not available.
When “Chord” is selected:
For instructions on editing already recorded data, refer to page 73.
For instructions on inputting Chord/Section Change events for Style playback via Step Recording,
touch [Step Rec] then refer to page 71.
6If necessary, touch (Edit) to return to the portal display of the Song Creator, then
execute the Channel Edit function (page 76).
7Touch (Save) at the top right of the display to save the created Song.
NOTICE
The recorded Song data will be lost if you select another Song or turn off the power to the instrument without
executing the Save operation.
4
3, 6 7
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 68
The explanations here apply when one of “Ch1” – “Ch16” is selected in step 5 on page 67. With [Step Rec]
turned on at the bottom left of the display, you can input the notes one by one, using the controls below.
Control Names and Functions
Recording Melodies via Step Recording
Event List Indicates events such as note and Voice selection which have been input. For details,
refer to page 74.
Song Position
(Measure: Beat:
Clock)
Indicates the current Song position. Events such as note and Voice selection you have
input are recorded at the position indicated here. You can change the current position
by touching [ ] or [ ] below the Measure, Beat, and Clock* respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920
clocks.
Cursor Lets you move the cursor position.
Step Rec Turning this on shows the Step Recording display, and turning it off shows the Song
Edit display.
Velocity Determines the velocity (loudness) of the note to be entered. The velocity value can be
specified within a range from 1 to 127. The higher the velocity value, the louder the
sound becomes.
Kbd.Vel: Actual resulting velocity
Length Determines the gate time (note length) of the note to be entered.
Manual: For freely setting the gate time. Touch “Manual” and close the pop-up window by touching
“OK,” then set the gate time to any desired percentage by using the Data dial.
127
111
95
79
63
47
31
15
80% 40%
99% 20%
Normal: Staccato:
Ten u to: S t a c c a t i s s i m o :
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 69
Example of Step Recording — Melodies
The numbers shown in the illustration correspond to the following operation step numbers.
The illustration given here is just a sample. Since the music score (called up via [Menu] [Score]) is generated from
recorded MIDI data, it may not appear exactly the same as shown above. Non-note musical performance symbols will
not be shown in the Score display, even if you’ve entered them.
This section describes the instructions on inputting the melodies of the above notation via the Step Recording.
Before starting, note the following points:
To input the note with the tie in step 4, you need to operate without releasing the key. Proceed with the
operations, reading the instructions carefully.
Before inputting notes as described below, select the desired Voice by using the Voice buttons. Even if it has
already been selected, you need to re-select the same Voice to input the Voice number to the Event List.
Keep in mind that only note and Voice selection events can be input with Step Recording.
1Enter the first and second notes with a slur.
1- 1 Touch [Velocity] to select “ .
1- 2 Touch [Length] to select “99% (Tenuto).”
1- 3 Touch [Note Type] once or twice to call up the dotted note type.
1- 4 Touch the dotted quarter-note length ( ) to turn it on.
1- 5 Press the C3 key.
With the operations above, the first note has been entered. Next, enter the second note.
1- 6 Touch [Note Type] once or twice to call up the normal note indications.
1- 7 Touch the eighth-note length ( ) to turn it on.
1-8Press the D3 key.
The first and second notes are entered with a slur.
2Enter the next notes with staccato.
2-1 Touch [Length] to select “40% (Staccato).”
2-2 Touch the quarter-note length ( ) to turn it on.
2-3 Play the keys E3 and F3 in order.
The first measure has been completed.
Note Type, Note
Indication
Touching [Note Type] repeatedly will alternate the type of the note indications at right in
order: normal, dotted, and triplet. Select one of three types, then select (turn on) one of
the note indications with which the next note is input. If you touch the selected note
indication (which is turned on) again, a rest will be input with the corresponding length.
Delete Deletes the selected data.
1234
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 70
3Enter a quarter-note rest.
Touch the quarter-note ( ), that has been turned on, just once to input a quarter-note rest.
Be careful not to touch the same note (which is turned on) several times. Doing so results in multiple rest
being input for the corresponding times. Rests are not actually indicated as such in the Event List, but
you can confirm whether any have been input or not by checking the Song Position.
4Enter the next notes and apply a tie.
4-1 Touch [Velocity] to select “ .
4-2 Touch [Length] to select “80% (Normal).”
4-3 While holding G3 key on the keyboard, touch quarter-note ( ).
Do not release the G3 key yet. Keep holding it while executing the following steps.
4-4 While holding the G3 key, press the C4 key.
Do not release the G3 and C4 keys yet. Keep holding the notes while executing the following step.
4-5 While holding the keys G3 and C4, touch half-note ( ).
After touching half-note ( ), release the keys.
The second measure has been completed.
5Press the SONG CONTROL [] (STOP) button to return to the top of the Song,
then hear the newly entered Song by pressing the [ / ] (PLAY/PAUSE) button.
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 71
The explanations here apply when “Chord” is selected in step 5 on page 67. With [Step Rec] turned on at the
bottom left of the display, you can input the Chord/Section Change events for Style playback one by one.
Control Names and Functions
Recording Chord/Section Change Events via Step Recording
Event List Indicates events such as Chord and Section changes which have been input.
For details, refer to page 74.
Song Position
(Measure: Beat:
Clock)
Indicates the current Song position. Events such as Chord and Section change you
have input are recorded at the position indicated here. You can change the current
position by touching [ ] or [ ] below the Measure, Beat, and Clock* indications
respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920
clocks.
Cursor Lets you move the cursor position.
Step Rec Turning this on shows the Step Recording display, and turning it off shows the Song
Edit display.
Note Indications Select one of the four note lengths for inputting the next event.
Delete Deletes the selected data.
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 72
Example of Step Recording — Chord/Section Events
These instructions show how to input the Chord/Section change events of the above notation via Step
Recording. Before starting, note the following points:
Turn off the STYLE CONTROL [AUTO FILL IN] button on the panel.
Select a conventional 4-beat Style.
NOTE In order to detect the chord played in the chord section of the keyboard, set the Fingering type (page 6) to a setting other than
“Full Keyboard” and “AI Full Keyboard.” Also, you need to set the “Stop ACMP” parameter to a setting other than “Disabled” in
the Style Setting display (page 84).
1Enter the chords for the Main A section.
1- 1 Press the MAIN VARIATION [A] button.
1- 2 Touch the half-note length ( ) to turn it on.
1- 3 Play the chords C, F and G in the chord section of the keyboard.
2Enter the chords for the Break section.
2-1 Press the [BREAK] button.
2-2 Touch the quarter-note length ( ) to turn it on.
2-3 Play the chords F and G7 in the chord section of the keyboard.
NOTE To enter fill-ins, turn the [AUTO FILL IN] button to on, and simply press the desired MAIN VARIATION [A] – [D] button.
C F G F G7 C
123
Main A Main BBreak
* The numbers shown in the illustration correspond to the following operation step numbers.
C
F
G
1- 1
1- 3
1- 2
2-2 2-3
2-1
F
G7
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 73
3Enter the chords for the Main B section.
3-1 Press the MAIN VARIATION [B] button.
3-2 Touch the whole-note length ( ) to turn it on.
3-3 Play the chord C in the chord section of the keyboard.
The Chord and Section change events are now entered.
4Press the SONG CONTROL [] (STOP) button to return to the top of the Song,
then listen to the newly entered Song by pressing the [ / ] (PLAY/PAUSE)
button.
5Touch and turn off [Step Rec] to call up the Song Edit display.
6Touch [Expand] at the upper left of the Song Edit display to convert the Chord/
Section change events to the Song data.
With the operations above (steps 1 – 3), only Chord and Section change events are recorded, meaning
that the actual Song data has not been created and the Style part can produce no sound even if you start
Song playback after exiting from the Song Creator. Accordingly, make sure to execute the Expand
function after you finish inputting. If you have not finished inputting, save the Song to maintain the
recorded events then continue inputting additional events as desired in the future.
The explanations here apply to step 5 on page 67. From the Song Edit display, you can edit each of the events
such as Note data and Voice selection which are created via Realtime Recording or Step Recording.
Editing the Recorded Data
C
3-1
3-2
3-3
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 74
Editing Target Specifies the Editing Target.
•Ch 1 Ch 16: When one of these is selected, you can edit the channel data.
•SysEx: Lets you edit System Exclusive data which applies to all channels.
• Lyrics: Lets you edit Lyrics data.
•Chord: Lets you edit Chord/Section change events for Style playback.
Expand This is shown only when “Chord” is selected above, and lets you convert the Chord/Section
change events you input in the Step Recording display to actual sounded note data. Make
sure to execute this function when finalizing Song data. If you exit from the Song Creator
without executing this function, starting Song playback produces no sound of the Style part.
Event List In this area, the events of the Song data are listed and can be edited. Each line shows one
event.
Depending on the Editing Target above (), the listed and editable events differ as
described below.
When the Editing Target is set to one of “Ch1”“Ch16”:
Note An individual note within a Song. Includes the note name which
corresponds to the key which was played, plus a velocity value
based on how hard the key is played, and the gate time value (the
length of a note).
Ctrl
(Control Change)
Settings to control the Voice, such as volume, pan, filter and effect
depth (edited via the Mixer), etc.
Prog
(Program Change)
MIDI program change number for selecting a Voice.
P. B n d
(Pitch Bend)
Data for changing the pitch of a Voice continuously.
A.T.
(Aftertouch)
This event is generated when pressure is applied to a key after the
key is pressed. Note that the keyboard of this instrument does not
feature Aftertouch, although Aftertouch values can be entered
here.
P.A.T. (Polyphonic
Aftertouch)
This event is generated when pressure is applied to a key after the
key is pressed. This is used for Grand Expression Modeling on
this instrument.
When the Editing Target is set to “SysEx”:
ScBar
(Score Start Bar)
Determines the top measure number as the starting point of the
Song data.
Tempo Determines the tempo value.
Time
(Time signature)
Determines the time signature
Key
(Key signature)
Determines the key signature, as well as the major/minor setting,
for the music score shown on the display.
XGPrm
(XG parameters)
Allows you to make various detailed changes to the XG
parameters. For details, refer to “MIDI Data Format” in the Data
List (separate PDF).
Indicates the Song position
(measure: beat: clock) of the
corresponding event.
Indicates the
event type.
Indicates the event value or detail.
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 75
NOTE Unexpected sounds may occur if you edit MIDI data related to Grand Expression Modeling (P.A.T., CC#19, CC#88).
Event List Sys/Ex.
(System Exclusive)
Displays the System Exclusive data in the Song. Keep in mind that
you cannot create new data or change the contents of the data
here; however, you can delete, cut, copy, and paste the data.
Meta
(Meta event)
Displays the SMF meta events in the Song. Keep in mind that you
cannot create new data or change the contents of the data here;
however, you can delete, cut, copy, and paste the data.
When the Editing Target is set to “Lyrics”:
Name Allows you to enter the Song name.
Lyrics Allows you to enter lyrics.
Code CR: Enters a line break in the lyrics text.
LF: Clears the currently displayed lyrics and displays the next set
of lyrics.
When the Editing Target is set to “Chord”:
Style Style name
Tempo Tempo setting
Chord Chord root, Chord type, On Bass Chord
Sect (Section) Style Section (Intro, Main, Fill In, Break, Ending)
OnOff On/off status for each part (channel) of the Style
CH.Vol
(Channel Volume)
Volume for each part (channel) of the Style
S.Vol
(Style volume)
Overall volume of the Style
Song Position
(Measure: Beat:
Clock)
Indicates the current Song position. The events you input are recorded at the position
indicated here. You can change the current position by touching [ ] or [ ] below the
Measure, Beat, and Clock* indications respectively.
*Clock
Smallest unit for the Song position and note length. A quarter note consists of 1920 clocks.
Cursor Lets you move the cursor position.
Step Rec Turning this on shows the Step Recording display, and turning it off shows the Song Edit
display.
Event Filter Calls up the Event Filter window, letting you select only the events you wish to be shown in
the event list.
: Checkmark all items.
: Remove checkmarks from all items.
: Invert checked/unchecked for all items.
Multi Select After turning this on, use the Cursor buttons () on the display to select multiple events.
Cut/Copy/Paste Use these when you want to copy or move the selected events.
Insert Adds a new event.
Delete Deletes the selected events.
Cancel Cancels editing and restores the original value.
−/+ Increases or decreases the value of the current cursor position by 1.
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 76
The explanations here apply to step 6 on page 67. The Channel Edit display lets you correct or convert the
specific portion of the Song data.
After editing the desired parameter, touch [Execute] to actually enter the edits for each setup window. When
execution is completed, this button changes to [Undo], letting you restore the original data if you are not
satisfied with the results. The Undo function only has one level; only the previous operation can be undone.
Channel Edit — Editing Channel Data
Target Ch Select the target channel to be edited.
Quantize The Quantize function allows you to align the timing of all the notes in a channel. For example, if you
record the musical phrase shown below, you may not play it with absolute precision, and your
performance may have been slightly ahead of or behind the precise timing. Quantize is a convenient
way of correcting for this.
NOTE Unexpected sounds may occur if you quantize a channel which contains MIDI data related to Grand
Expression Modeling.
Size Selects the quantize size (resolution). For optimum results, you should set the
Quantize size to the shortest note value in the channel. For example, if eighth notes
are the shortest in the channel, you should use eighth note as the Quantize size.
Settings:
The three Quantize settings marked with asterisks (*) are exceptionally convenient,
since they allow you to quantize two different note values at the same time. For
example, when the straight eighth notes and eighth notes triplet are contained in
the same channel, if you quantize by the straight eighth notes, all notes in the
channel are quantized to straight eighth notes — completely eliminating any triplet
feel. However, if you use the eighth note + eighth note triplet setting, both the
straight and triplet notes will be quantized correctly.
After 1/8 note quantization
1/4 note
1/4 note
triplet
1/8 note 1/16 note 1/32 note 1/16 note+
1/8 note triplet*
1/8 note
triplet
1/16 note
triplet
1/8 note+
1/8 note triplet*
1/16 note+
1/16 note triplet*
Creating/Editing MIDI Songs (Song Creator)
CVP-909/CVP-905 Reference Manual 77
Quantize Strength Determines how strongly the notes will be quantized. A setting of 100% produces
exact timing. If a value less than 100% is selected, notes will be moved toward the
specified quantization beats according to the specified percentage. Applying less
than 100% quantization lets you preserve some of the “human” feel in the
recording.
Delete You can delete the data of the specified channel in the Song. Checkmark (touch) the desired channel
whose data you wish to delete, then touch [Execute] to actually delete the data.
Mix This function lets you mix the data of two channels and place the results in a different channel. It also
lets you copy the data from one channel to another.
NOTE Unexpected sounds may occur if you mix data of a channel which contains MIDI data related to Grand
Expression Modeling.
Source 1 Ch Determines the MIDI channel (1 – 16) to be mixed. All MIDI events of the channel
specified here are copied to the destination channel.
Source 2 Ch Determines the MIDI channel (1 – 16) to be mixed. Note events, P.A.T., CC#19 and
CC#88 of the channel specified here are copied to the destination channel. Besides
the values 1 – 16, there is a “Copy” setting that allows you to copy the data from
Source 1 to the destination channel.
Destination
Ch
Determines the channel into which the mix or copy results will be placed.
Transpose This allows you to transpose the recorded data of individual channels up or down by a maximum of
two octaves in semitone increments.
1-16 Sets the Transpose value for each channel.
All − Decreases the Transpose value for all channels by 1.
All + Increases the Transpose value for all channels by 1.
NOTE Make sure not to transpose channels 9 and 10. In general, Drum kits are assigned to these channels. If
you transpose the channels of Drum kits, the instruments assigned to each key will be changed.
Setup The current settings of the Mixer display and other panel settings can be recorded to the top position
of the Song as the Setup data. The Mixer and panel settings recorded here are automatically recalled
when the Song starts.
Checkmark the items of playback features and functions that you wish to automatically be called up
along with the selected Song.
NOTE Before executing the Setup operation, move the Song position to the top of the Song by pressing the
SONG [STOP] button.
Original data (assuming 4/4 meter)
Quantizing strength = 100%
Quantizing strength = 50%
Quarter-note length
CVP-909/CVP-905 Reference Manual 78
Voice Settings
Lets you adjust the pitch related parameters for each keyboard part.
Tune
Tuning Determines the pitch of each keyboard part.
Octave Determines the range of the pitch change in octaves, over two octaves up or down for each keyboard
part.
Pitch Bend
Range
Determines the range of the Pitch Bend for each keyboard part in semitones when the “Pitch Bend”
or “Glide” function is assigned to a pedal (page 44).
Portamento
Time
Portamento is a function that creates a smooth transition in pitch from the first note played on the
keyboard to the next. The Portamento Time determines the pitch transition time. Higher values result
in a longer pitch change time. Setting this to “0” results in no effect. This parameter is available for
keyboard parts which are set to “Mono” (page 48).
Voice Settings
CVP-909/CVP-905 Reference Manual 79
Lets you set the Voices in the “VRM Piano” category. These settings are applied commonly to all parts for
which the target Voices are selected.
NOTE These settings are not effective in the Piano Room. In the Piano Room, VRM is on and the type of Grand Expression Modeling is
“Dynamic.”
Piano
VRM* VRM Turns the VRM effect on or off.
Damper Resonance Depth
Adjusts the depth of the VRM effect heard when pressing the damper pedal.
String Resonance Depth Adjusts the depth of the VRM effect heard when playing the keyboard.
Reverb Depth Adjusts the Reverb depth for VRM Voices.
Chorus Depth Adjusts the Chorus depth for VRM Voices.
Grand Expression Selects the type of the Grand Expression Modeling effects, which simulates
the physical sound transitions of an actual piano.
•Dynamic: You can control extremely subtle nuances in the
performance and sound by changing your playing strength or touch.
Static: The nuances are generally fixed.
NOTE Grand Expression Modeling is effective only for the Voices of “CFX Concert
Grand” and “Bösendorfer Grand” in the “VRM Piano” category.
Voice Settings
CVP-909/CVP-905 Reference Manual 80
Lets you adjust the pitch and volume of each note (or key) individually for the “VRM Piano” category Voice
selected as the Main part.
Each Key Setting
Determines whether you set the pitch (Tune) or the volume is to be set.
Selects the note for changing the pitch or volume. When setting the pitch, you can select the note also by
pressing the actual key while holding down the keyboard illustration on the display.
Sets the pitch or the volume. The note for which the setting is changed from the default is colored in the
keyboard illustration on the display.
Resets all [Tune] or [Volume] settings to the default.
The VRM Piano Voice
selected for the Main
part.
Voice Settings
CVP-909/CVP-905 Reference Manual 81
Each Voice is linked to its default Voice Set parameter settings, equivalent to those in the Voice Edit display
(page 47) for the Voices other than the Organ Flutes Voices. Although usually these settings are automatically
called up by selecting a Voice, you can also disable this feature. For example, if you want to change the Voice
yet keep the same Harmony effect, remove the checkmark of “Keyboard Harmony.”
In the Voice Selection display, icons defining the Voice characteristics are indicated at the left of the Voice
name. For some particular Voices, (Information) is shown at the bottom of the display and detailed
information can be called up by touching it.
Voice Set
Other Setting
Category Button Determines how the Voice Selection display is opened when one of the VOICE
category buttons is pressed.
Open & Select: Opens the Voice Selection display with the previously
selected Voice in the Voice category automatically selected (when one of the
VOICE category buttons is pressed).
•Open Only: Opens the Voice Selection display with the currently selected
Voice (when one of the VOICE category buttons is pressed).
S.Art2 Auto Articulation
(only for CVP-909)
Determines whether articulation is added to S.Art2 Voices automatically for these
respective key timings:
•Head: When the first key is pressed.
•Joint: When the key is pressed or released while holding down other key(s).
• Tail: When the last key is released.
NOTE This affects not only S.Art2 Voices of your keyboard performance, but also the S.Art2
Voices in Songs or Styles.
Voice Characteristics
VRM Refer to the Owner’s Manual, Chapter 3.
Natural! Natural! Voices are high quality sounds based on many specialist sampling techniques.
They are especially suited to recreating Piano and other keyboard instruments.
Voice Settings
CVP-909/CVP-905 Reference Manual 82
S.Articulation!
S.Articulation2!
(only for CVP-909)
Refer to the Owner’s Manual, Chapter 3.
Live! Live! Voices feature stereo sampling, to reproduce accurately the stereo image of an
acoustic instrument, as well as the ambience of the room it was recorded in.
Cool! Cool! Voices reproduce the complex characteristics of Electric Instruments, by utilizing
sophisticated programming techniques in both voicing, and the use of DSP effects.
Sweet!
Sweet! Voices are acoustic instruments which feature the sampled vibrato of the
original player, creating a far more realistic and emotional performance than
synthesized vibrato.
Drums
Drum & Percussion instruments are mapped across the keyboard so you can play
them directly, or use in music production. For information about what sound is
assigned to each key, refer to the “Drum/key Assignment List” in the Data List (separate
PDF).
Live!Drums Stereo sampling is used for these high definition Drum and Percussion instruments,
which are mapped across the keyboard so you can play them directly, or use in music
production.
Revo!Drums
(only for CVP-909)
These Voices recreate the natural sound of real drums by producing different
instrument sound samples (or waveforms), when playing the same key multiple times.
SFX
Special percussion and sound effects are mapped across the keyboard, so you can
play them directly, or use in music production. For information about what sound is
assigned to each key, refer to the “Drum/key Assignment List” in the Data List (separate
PDF).
Live!SFX
Stereo sampling is used for these high definition special percussion and sound effects,
which are mapped across the keyboard so you can play them directly, or use in music
production.
Revo!SFX
(only for CVP-909)
These Voices recreate the natural sound of real percussion instruments by producing
different sound samples (or waveforms), when playing the same key multiple times.
OrganFlutes! OrganFlutes! lets you create your own Organ registrations, by combining Organ Flute
Footages at different pitches, just like a real organ. See page 51 for details.
MegaVoice
MegaVoice is a special Voice format designed for use in styles and songs, not for live
performance. Different velocity ranges are used to select dramatically different playing
styles simultaneously, and without changing the voice.
Actual sound maps for the MegaVoices are given in the Data List (separate PDF).
NOTE MegaVoices are not compatible with other models. Any Song or Style data you’ve
created on this instrument using the MegaVoices will not sound properly when played
back on other instruments which do not feature the same MegaVoices.
NOTE MegaVoices will sound differently depending on the keyboard range, velocity, touch,
etc. Hence, if you apply the Keyboard Harmony effect, change the transpose setting or
change the Voice Set parameters, unexpected or undesired sounds may result.
Regular Other Voices including GM Voices and XG Voices.
Voice Settings
CVP-909/CVP-905 Reference Manual 83
This instrument features GM Voices, XG Voices, and MegaVoices. These Voices can be called up from the
“Others” category in the Voice Selection display.
1From the Home display, touch the Voice name of the desired part to call up the
Voice Selection display.
2Touch the tab of the “Others” category.
3Touch (Above) several times if necessary, to call up the root directory of
“Others.”
4Touch the desired category, such as “GM&XG” and “MegaVoice.”
NOTE You can find the “Legacy” folder in this display. This folder contains previous Yamaha Clavinova Voices for data
compatibility with other models.
5Select the desired Voice.
Selecting GM/XG or MegaVoices
12
3
CVP-909/CVP-905 Reference Manual 84
Style Playback Related Settings
Setting
Dynamics Control •Off:
The Style volume does not respond to your playing strength.
•Narrow: The Style volume changes over a narrow range in response to your playing
strength. In other words, you must play very strongly or softly to have the volume
change.
•Medium: The Style volume changes normally in response to your playing strength.
•Wide: The Style volume changes over a wide range in response to your playing
strength. In other words, playing strongly or softly produces greater changes in the
volume.
Display Tempo Turns on or off the tempo indication for each Style on the Style Selection display.
Stop ACMP When the [ACMP ON/OFF] button is on, [SYNC START] is off, and this parameter is set
to the value other than “Disabled,” you can play chords in the chord section of the
keyboard with the Style stopped, and still hear the accompaniment chord. In this
condition — called “Stop Accompaniment” — any valid chord fingerings are recognized
and the chord root/type are shown in the Style area of the Home display. Here, you can
determine whether the chord played in the chord section will sound or not in the Stop
Accompaniment status.
•Disabled: Disables the Stop Accompaniment feature. When Style playback is
stopped, any pressed notes in the chord section of the keyboard will not be
recognized as chords.
•Off: The chord played in the chord section will not sound.
•Style: The chord played in the chord section will sound via the Voices for the Pad
part and the Bass channel of the selected Style.
•Fixed: The chord played in the chord section will sound via the specified Voice,
regardless of the selected Style.
NOTE When the selected Style contains MegaVoices, unexpected sounds may result when this
is set to “Style.”
NOTE If you record a Song using the Stop Accompaniment, both the Voice that is sounded and
the chord data will be recorded when set to “Style,” and only the chord data will be
recorded when set to “Off” or “Fixed.”
NOTE When this is set to “Disabled,” chords are not recognized while the Style is stopped. This
is why both Vocal Harmony (with the Chordal mode) and Keyboard Harmony are not
applied even if you play a chord in the chord section of the keyboard while the Style is
stopped.
Style Playback Related Settings
CVP-909/CVP-905 Reference Manual 85
ACMP On/Off Default Determines whether the [ACMP ON/OFF] button is on or off when the power is turned
on.
OTS Link Timing This applies to the OTS Link function. This parameter determines the timing in which
the One Touch Settings change with the MAIN VARIATION [A] – [D] change. (The [OTS
LINK] button must be on.)
Real Time: One Touch Setting is immediately called up when you press a MAIN
VARIATION button.
•Next Bar: One Touch Setting is called up at the next measure, after you press a
MAIN VARIATION button.
Synchro Stop Window This determines how long you can hold a chord before the Synchro Stop function is
automatically canceled. When the [SYNC STOP] button is turned on and this is set to a
value other than “Off,” the Synchro Stop function is automatically canceled if you hold a
chord for longer than the time set here. This conveniently resets Style playback control
to normal, letting you release the keys and still have the Style play. In other words, if
you release the keys sooner than the time set here, the Synchro Stop function works.
Change Behavior
Section Set Determines the default section that is automatically called up when selecting different
Styles (when Style playback is stopped). When set to “Off” and Style playback is
stopped, the active section is maintained even if the different Style is selected. When
any of the MAIN A–D sections is not included in the Style data, the nearest Section is
automatically selected. For example, when MAIN D is not contained in the selected
Style, MAIN C will be called up.
Tempo This determines whether the tempo changes or not when you change the Style.
• Lock: Regardless of playback status, the tempo setting of the previous Style is
maintained.
• Hold: While the Style is playing back, the tempo setting of the previous Style is
maintained. While the Style is stopped, the tempo changes to that of the default
tempo of the selected Style.
• Reset: Regardless of playback status, the tempo changes to that of the default
tempo for the selected Style.
Part On/Off This determines whether the Style Channel on/off status changes or not when you
change the Style.
• Lock: Regardless of playback status, the Channel on/off status of the previous Style
is maintained.
• Hold: While the Style is playing back, the Channel on/off status of the previous Style
is maintained. While the Style is stopping, all Channels of the selected Style are set
to on.
• Reset: Regardless of playback status, all Channels of the selected Style are set to
on.
Style Playback Related Settings
CVP-909/CVP-905 Reference Manual 86
Style Characteristics
On the Style Selection display, icons defining the Style characteristics are indicated at left of the Style
name.
Pro: These Styles provide professional and exciting arrangements combined with perfect playability.
The resulting accompaniment exactly follows the chords of the player. As a result, your chord changes
and colorful harmonies are instantly transformed into lifelike musical accompaniment.
Session: These Styles provide even greater realism and authentic backing by mixing in original chord
types and changes, as well as special riffs with chord changes, with the Main sections. These have
been programmed to add “spice” and a professional touch to your performances of certain songs and in
certain genres. Keep in mind, however, that the Styles may not necessarily be appropriate or even
harmonically correct for all songs and for all chord playing. In some cases for example, playing a simple
major triad for a country song may result in a “jazzy” seventh chord, or playing an on-bass chord may
result in inappropriate or unexpected accompaniment.
Free Play: These Styles are characterized by rubato performance. You can perform freely with
remarkably expressive accompaniment without being constrained by a strict tempo.
Pianist: These special Styles provide piano-only accompaniment. Just by playing the proper chords
with your left hand, you can automatically add complicated, professional-sounding arpeggios and bass/
chord patterns.
CVP-909/CVP-905 Reference Manual 87
Song Settings Related to Playback/
Recording
If you turn on the Guide function and play back a MIDI Song, the keyboard guide lamps indicate the notes
(location and timing) for you to play. Also, when you sing along with Song playback, you can control the
playback timing by playing the keyboard to match your singing.
The Guide function can be turned on from the Song area (when expanded) of the Home display, Score display,
Lyrics display and Text display. For instructions on how to use Guide function, refer to the Owner’s Manual,
Chapter 5. This section covers the detailed parameters about the Guide function.
NOTE The Guide settings can be saved as a part of Song data (page 77). When you select the saved Song the next time, the
corresponding Guide settings will also be called up.
Guide
Type Lets you select the Guide type.
Guide menu for keyboard practice
Follow Lights: With this function, the keyboard guide lamps indicate which notes you should
play. Song playback pauses and waits for you to play. When you play the correct notes, Song
playback continues.
•Any Key: With this function, you can play the melody of a Song just by pressing a single key (any
key is OK) in time with the rhythm. Song playback pauses and waits for you to play any key. Simply
play a key on the keyboard in time with the music and Song playback continues.
Your Tempo: Basically the same as “Follow Lights.” In addition, playback tempo will change to
match the speed at which you are playing.
Guide menu for singing
•Karao-Key: This function lets you control the Song playback timing with just one finger, while you
sing along. This is useful for singing along with your own performance. Song playback pauses,
waiting for you to sing. Simply play any key on the keyboard (playing the keyboard produces no
sound) and Song playback continues.
Lamp Activates or deactivates the keyboard guide lamp.
NOTE If the Guide Lamps do not light as intended in the “Part Ch” display, set the Right to “Ch1” then set the
Left to “Ch2.”
Lamp
Timing
Determines the timing by which the keyboard guide lamps light.
•Just: The guide lamps light in time with the music, at the same timing you should play.
•Next: The guide lamps light slightly ahead of the music, indicating the notes you should play next.
The guide lamps flash if you fail to play the keys with the correct timing.
Song Settings Related to Playback/Recording
CVP-909/CVP-905 Reference Manual 88
Part Ch
Right Determines which channel is assigned to the right-hand part.
Left Determines which channel is assigned to the left-hand part.
Auto Set When set to “On,” this automatically sets the proper MIDI channels for the right- and left hand parts
pre-programmed in the commercially available Song data. Normally, this should be set to “On.”
Lyrics
Language Determines the language of the displayed lyrics.
• Auto: When the language is specified in the Song data, the lyrics are displayed accordingly. When
the language is not specified in the Song data, the lyrics language is regarded as “International
below.
• International: Handles the displayed lyrics as a western language.
• Japanese: Handles the displayed lyrics as Japanese.
Play
Repeat Mode Determines how playback of the current MIDI Song or Audio Song is repeated.
•Off: Plays through the selected Song, then stops.
• Single: Plays through the selected Song repeatedly.
•All: Continues playback through all the Songs in the specified folder repeatedly.
•Random: Continues playback at random through all the Songs in the specified folder
repeatedly.
NOTE The preset Songs in the “Follow Lights” folder contain the Guide settings. These Songs are
inappropriate for use with the “All” or “Random” settings.
Phrase Mark
Repeat
Phrase Mark is a pre-programmed part of some Song data, which specifies a certain location
(set of measures) in the Song. When this is “On,” the section corresponding to the specified
Phrase Mark number is repeatedly played back. This parameter is available only when the
MIDI Song containing Phrase Mark settings is selected.
Quick Start On some commercially available MIDI Song data, certain settings related to the MIDI Song
(such as Voice selection, volume, etc.) are recorded to the first measure, before the actual
note data. When Quick Start is set to “On,” the instrument reads all initial non-note data of the
Song at the highest possible speed, then automatically switches to the appropriate tempo at
the first note. This allows you to start playback as quickly as possible, with a minimum pause
for reading of data.
MIDI Song Fast
Forward Type
Determines the fast forward type of when pressing [] during MIDI Song playback.
• Jump: Pressing [] once instantly sets the playback position to the next measure without
sounding. Holding [] scrolls forward continuously.
• Scrub: Pressing and holding [] plays and sounds the MIDI Song at high speed.
USB MIDI Song
Auto Open
When this is set to “On,” connecting the USB flash drive will call up the first MIDI Song in the
USB flash drive.
Performance
Assistant
Refer to page 89.
Song Settings Related to Playback/Recording
CVP-909/CVP-905 Reference Manual 89
Playing Backing Parts with the Performance Assistant Technology
This feature lets you play your own backing parts on the keyboard along with MIDI Song playback, and have
them sound perfectly appropriate (even though the notes you play might be wrong).
1Select a MIDI Song containing chord data.
The Performance Assistant Technology is applied only to MIDI Songs containing chord data. To confirm
whether the selected Song contains chord data or not, call up the Home display with the Style area
shown, then start playback of the Song. If the current Song contains chord data, the current chord type
appears in the Style area. After stopping playback, go to the next step.
2Call up the operation display via [Menu] [SongSetting] [Play].
3Set the Performance Assistant to “On.”
NOTE Selecting a Song will turn off the Performance Assistant.
4Press the SONG CONTROL [ /] (PLAY/PAUSE) button to start playback.
5Play the keyboard.
Along with MIDI Song playback, try playing a bass line in the left hand area while playing various phrases
or chords in the right hand area. Even if you do not know what notes should be played, don’t worry and
play any keys as desired! Only the harmonically “correct” notes matching the current chord are sounded,
regardless of the notes you actually play.
6Press the SONG CONTROL [] (STOP) button to stop playback.
Re-recording a Specific Section of the MIDI Song — Punch In/Out
When re-recording a specific section of an already-recorded MIDI Song, use the Punch In/Out function. In this
method, only the data between the Punch In point and the Punch Out point is overwritten with the newly
recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over, and
you will hear them play back normally to guide you in the Punch In/Out timing.
1Call up the operation display via [Menu] [SongSetting] [Rec] Page 1/2.
2Set the parameters such as how the Recording starts/stops and the Punch In/Out
position.
NOTE The parameters here cannot be set while recording.
Chord Detection
Priority
Determines the priority of the chords for accompaniment, either the ones contained in the
MIDI Song being played back or the chord you’ve just played in the chord section of the
keyboard.
MIDI Song: Gives priority to the chords contained in the MIDI Song.
•Keyboard: Gives priority to the chords you play in the chord section of the keyboard. Set
this if you want to practice playing chords with MIDI Song playback. Once you play in the
chord section during MIDI song playback, the instrument ignores the chords contained in
the MIDI Song until the playback ends.
Rec
Song Settings Related to Playback/Recording
CVP-909/CVP-905 Reference Manual 90
3Select a MIDI Song to be re-recorded.
4Press the [] (REC) button to cal l up the Song Recording display, and then
confirm that [Overwrite MIDI] is selected.
If the Channel area is not shown, touch [ ] at the left of “Channel.
5From the display, set the part or parts you intended to re-record to [Rec], and set
all other parts to [Off].
NOTE For details about the recording channels, refer to the Owner’s Manual, Chapter 6.
Mode Rec Start Determines the recording start behavior.
•Normal: Overwrite recording starts when Song playback is started via
the SONG [ / ] (PLAY/PAUSE) button or when you play the keyboard in
the Synchro Standby mode.
First Key On: The Song plays back normally, then starts overwrite
recording as soon as you play the keyboard.
Punch In At: The Song plays back normally up to the beginning of the
“Punch In At” measure specified in the Punch In/Out parameter below,
then starts overwrite recording at that point.
Rec Stop Determines the recording stop behavior, or how data is handled after
recording is stopped.
Replace All: This deletes all data after the point at which recording is
stopped.
Punch Out: The Song position at which recording is stopped is regarded
as the Punch Out point. This setting maintains all data after the point at
which recording is stopped.
Punch Out At: Actual overwrite recording continues until the beginning
of the “Punch Out” measure specified in the Punch In/Out parameter
below, at which point recording stops and normal playback continues.
This setting maintains all data after the point at which recording is
stopped.
Punch In/
Out
Punch In At Specifies the Punch In measure.
Punch Out At Specifies the Punch Out measure.
Pedal Control When this is set to “On,” you can use the center pedal to control the Punch
In and Punch Out points. While a Song is playing back, pressing (and
holding) the center pedal instantly enables Punch In recording, while
releasing the pedal stops recording (Punch Out). You can press and release
the center pedal as often as you want during playback. Note that the current
function assignment of the center pedal is cancelled when the Pedal Punch
In/Out function is set to “On.”
NOTE Pedal Punch In/Out operation may be reversed depending on the particular
pedal you’ve connected to the instrument. If necessary, change the pedal
polarity to reverse the control (page 43).
Song Settings Related to Playback/Recording
CVP-909/CVP-905 Reference Manual 91
6Press the SONG CONTROL [ /] (PLAY/PAUSE) button to start recording.
At the Punch In point specified in step 2, play the keyboard to start actual recording. At the Punch Out
point specified in step 2, stop playing the keyboard.
7Touch (Save) which appears in the Song area of the Home display to save the
recorded Song.
NOTICE
The recorded Song data will be lost if you select another Song or turn the power to the instrument off without
executing the Save operation.
Examples of re-recording with various Punch In/Out settings
This instrument features several different ways you use the Punch In/Out function. The illustrations below
indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded.
Setting the Audio File Format saved via Audio Recording
From the display called up via [Menu] [SongSetting] [Rec] page 2/2, you can specify the Audio file
format saved via the Audio recording.
Audio Rec Format •WAV:
Your performance will be recorded in WAV format which features higher
audio quality than MP3, but the file size will be larger.
MP3 128/256/320kbps: Your performance will be recorded in MP3 format
(MPEG-1 Audio Layer-3). The larger the value, the higher the quality, and the
larger the data size.
12345678
12345
12345678
12345678
12345
12345678
12345678
12345
12345678
6812345 7
Rec Start setting
Rec Stop setting
Normal
Replace All
Normal
Punch Out
Normal
Punch Out at 6
First Key On
Replace All
First Key On
Punch Out
First Key On
Punch Out at 6
Punch In at 3
Replace All
Punch In at 3
Punch Out
Punch In at 3
Punch Out at 6
Original data
Start overwrite recording *1
Play back original data Play the keyboard to start
overwrite recording
Start overwrite recording
Stop recording *2
Stop overwrite recording/play original data
Deleted
*1 To avoid overwriting measures 1 – 2, start recording from measure 3.
*2 To stop recording, press the [REC] button at the end of measure 5.
Previously recorded data
Newly recorded data
Deleted data
Deleted
Deleted
Start overwrite recording *1 Stop recording *2
Start overwrite recording *1
Stop recording *2
Stop recording *2
Stop overwrite recording/play original data
Stop recording *2
Stop recording *2
Stop overwrite recording/play original data
Play back original data
Play back original data
Play back original data
Play back original data
Play back original data
Play the keyboard to start
overwrite recording
Play the keyboard to start
overwrite recording
Start overwrite recording
Start overwrite recording
CVP-909/CVP-905 Reference Manual 92
Fine Tuning the Pitch
You can fine-tune the pitch of the entire instrument in 0.2 Hz steps—useful when you play the Clavinova along
with other instruments or CD music. Please note that the Tune function does not affect the Drum Kit or SFX Kit
Voices and Audio Songs. To restore the default initial setting (440.0 Hz), touch and hold down the setting value
for a while.
Master Tune – Fine Tuning the Pitch of the Entire Instrument
Scale Tune – Selecting or Creating a Temperament
1
2
Keyboard parts
Fine Tuning the Pitch
CVP-909/CVP-905 Reference Manual 93
1Select the desired Scale type (temperament).
You can select one of various scales for playing in custom tunings for specific historical periods or music
genres.
2Change the following settings as necessary.
To store the Scale Tune settings:
If you want to store the Scale Tune settings, use the Registration Memory. Press the REGISTRATION
MEMORY [MEMORY] button, then checkmark “Scale Tune” and press one of the REGISTRATION MEMORY
[1] – [8] buttons to register the Scale Tune settings.
Type • Equal: The pitch range of each octave is divided equally into twelve parts, with each
half-step evenly spaced in pitch. This is the most commonly used tuning in music today.
Pure Major, Pure Minor: These tunings preserve the pure mathematical intervals of
each scale, especially for triad chords (root, third, fifth). You can hear this best in actual
vocal harmonies — such as choirs and a cappella singing.
• Pythagorean: This scale was devised by the famous Greek philosopher and is created
from a series of perfect fifths, which are collapsed into a single octave. The 3rd in this
tuning are slightly unstable, but the 4th and 5th are beautiful and suitable for some leads.
• Mean-Tone: This scale was created as an improvement on the Pythagorean scale, by
making the major third interval more “in tune.” It was especially popular from the 16th
century to the 18th century. Handel, among others, used this scale.
Werckmeister, Kirnberger: This composite scale combines the Werckmeister and
Kirnberger systems, which were themselves improvements on the mean-tone and
Pythagorean scales. The main feature of this scale is that each key has its own unique
character. The scale was used extensively during the time of Bach and Beethoven, and
even now it is often used when performing period music on the harpsichord.
Arabic1, Arabic2: Use these tunings when playing Arabic music.
Base Note Determines the base note for each scale. When the base note is changed, the pitch of the
keyboard is transposed, yet maintains the original pitch relationship between the notes.
Tune [cent] Select the desired note to be tuned and tune it in cents. If you edit this parameter,
“(Edited)” is shown at the right of “Type” in step 1.
NOTE In musical terms a “cent” is 1/100th of a semitone. (100 cents equal one semitone.)
(Parts) Checkmark the part to which the Scale Tune setting is applied.
CVP-909/CVP-905 Reference Manual 94
Setting the Touch Sensitivity of the
Keyboard
You can adjust the touch response of the instrument (how the sound responds to the way you play the keys).
This setting does not change the weight of the keyboard.
For information about this display, refer to the Owner’s Manual, Chapter 1.
CVP-909/CVP-905 Reference Manual 95
Metronome Settings
Metronome
Volume Determines the level of the metronome sound.
Sound Determines which sound is used for the metronome.
•Bell Off: Conventional metronome sound, with no bell.
•Bell On: Conventional metronome sound, with bell.
English Voice: Count in English
German Voice: Count in German
Japanese Voice: Count in Japanese
French Voice: Count in French
Spanish Voice: Count in Spanish
Time Signature Determines the time signature of the metronome sound.
Tap Tempo
Volume Adjusts the volume of the sound triggered when the [TAP TEMPO] button is pressed.
Sound Selects the percussion instrument as sound triggered when the [TAP TEMPO] button is
pressed.
CVP-909/CVP-905 Reference Manual 96
MIDI Settings
In this section, you can make MIDI-related settings for the instrument. This instrument gives you a set of ten
pre-programmed templates that let you instantly and easily reconfigure the instrument to match your particular
MIDI application or external device. Also, you can edit the pre-programmed templates and save up to ten of
your original templates.
NOTE No MIDI signals are received in the Piano Room.
1Touch the box (shown above), then select a pre-programmed MIDI template
(below).
If you have already created an original MIDI template and saved it to User memory (in steps 2 and 3
below), you can also select that template from User memory.
2If desired, edit the MIDI parameters based on the MIDI template selected in step 1
in the relevant setting display.
System: Lets you set the MIDI System related parameters. ............................................. page 97
Transmit: Lets you set the MIDI Transmission related parameters................................... page 98
Receive: Lets you set the MIDI Reception related parameters. ........................................ page 99
On Bass Note: Lets you select the MIDI channels of which the MIDI data coming from the external
MIDI device will be used for detecting the bass note for Style playback........................... page 100
Chord Detect: Lets you select the MIDI channels of which the MIDI data coming from the external
MIDI device will be used for detecting the chord type for Style playback...........................page 101
3When you’ve finished editing in each display, touch (Save) to save the MIDI
settings as your original MIDI Template.
NOTE Your original MIDI templates can be saved as a single file to a USB flash drive. On the display called up via [Menu]
[Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “MIDI” to execute the Save operation (page 105).
Pre-programmed MIDI Templates
All Parts Transmits all parts including the keyboard parts (Main, Layer and Left), with the exception
of Song parts.
KBD & STYLE Basically the same as “All Parts” with the exception of how keyboard parts are managed.
The right-hand parts are handled as “Upper” instead of Main and Layer, and the left-hand
part is handled as “Lower.”
13
MIDI Settings
CVP-909/CVP-905 Reference Manual 97
The explanations here apply when you call up “System” display in step 2 on page 96.
Master KBD
(Master Keyboard)
In this setting, the instrument functions as a “master” keyboard, playing and controlling one
or more connected tone generators or other devices (such as a computer/sequencer).
Song With this setting, only the Song channels 1 – 16 are transmitted from this instrument via the
corresponding channel numbers 1 – 16 respectively. This is used to play Song data with an
external tone generator and to record Song data to an external sequencer.
Clock Ext
(Clock External)
Playback or recording (Song, Style, etc.) synchronizes with an external MIDI clock instead
of the instrument’s internal clock. This template should be used when you wish to set the
tempo on the MIDI device connected to the instrument.
MIDI Accord1
(MIDI Accordion 1)
MIDI accordions allow you to transmit MIDI data and play connected tone generators from
the keyboard and bass/chord buttons of the accordion. This template lets you control the
keyboard performance and Style playback from a MIDI Accordion.
MIDI Accord2
(MIDI Accordion 2)
Basically the same as “MIDI Accord1 above, with the exception that the chord/bass notes
you play with your left hand on a MIDI Accordion are recognized also as MIDI note events.
MIDI Pedal1 MIDI pedal units allow you play connected tone generators with your feet (especially
convenient for playing single note bass parts). This template lets you play/control the chord
root in Style playback with a MIDI pedal unit.
MIDI Pedal2 This template lets you play the bass part for Style playback by using a MIDI pedal unit.
MIDI OFF No MIDI signals are sent or received.
System – MIDI System Related Settings
Clock Determines whether the instrument is controlled by its own internal clock (“Internal”) or a
MIDI clock (“MIDI,” “USB1,” “USB2,” and “Wireless LAN”) received from an external device.
“Internal” is the normal Clock setting when the instrument is being used alone or as a
master keyboard to control external devices. If you are using the instrument with an
external sequencer, MIDI computer, or other MIDI device, and you want to synchronize it to
that device, set this parameter to the appropriate setting: “MIDI,” “USB 1, “USB 2,” or
“Wireless LAN.” In this case, make sure that the external device is connected properly
(e.g., to the instrument’s MIDI IN terminal), and that it is properly transmitting a MIDI clock
signal. When this is set for control by an external device (“MIDI,” “USB1,” “USB2,” or
“Wireless LAN”), the Tempo is indicated as “Ext.” in the Tempo display.
NOTE If the Clock is set other than “Internal,” the Style, Song, Metronome and Tempo cannot be
controlled by the buttons on this instrument.
NOTE “Wireless LAN” is shown only when the USB Wireless LAN adaptor (UD-WL01) is connected
to this instrument.
Transmit Clock Turns MIDI clock (F8) transmission on or off. When set to “Off,” no MIDI clock or Start/Stop
data is transmitted even if a Song or Style is played back.
Transpose MIDI Input Determines whether or not the instrument’s transpose setting is applied to the note events
received from the external device via MIDI.
Start/Stop Determines whether incoming FA (start) and FC (stop) messages affect Song or Style
playback.
MIDI Settings
CVP-909/CVP-905 Reference Manual 98
The explanations here apply when you call up the “Transmit” display in step 2 on page 96. This determines
which MIDI channel is used for each part when MIDI data is transmitted from this instrument.
1For each Part, select the MIDI Transmit Channel with which the MIDI data of the
corresponding Part is to be transmitted.
With the exception of the two parts below, the configuration of the parts is the same as those already
explained elsewhere in the Owner’s Manual.
Upper: A keyboard part played on the right side of the keyboard from the Left Split Point.
Lower: A keyboard part played on the left side of the keyboard from the Left Split Point. This is not
affected by the on/off status of the [ACMP ON/OFF] button.
NOTE If the same transmit channel is assigned to several different parts, the transmitted MIDI messages are merged to a single
channel — resulting in unexpected sounds and possible glitches in the connected MIDI device.
NOTE Protected Songs cannot be transmitted even if the proper Song channels 1 – 16 are set to be transmitted.
Local Control Turns the Local Control for each part on or off. When Local Control is set to “On,” the
keyboard of the instrument controls its own (local) internal tone generator, allowing the
internal Voices to be played directly from the keyboard. If you set Local Control to “Off,” the
keyboard and controllers are internally disconnected from the instrument’s tone generator
section so that no sound is output when you play the keyboard or use the controllers. For
example, this allows you to use an external MIDI sequencer to play the instrument’s
internal Voices, and use the instrument keyboard to record notes to the external sequencer
and/or play an external tone generator.
System
Exclusive
Message
Transmit Determines whether MIDI System Exclusive messages are transmitted (On) or not (Off)
from this instrument.
Receive Determines whether MIDI System Exclusive messages are recognized (On) or not (Off) by
this instrument.
Chord
System
Exclusive
Message
Transmit Determines whether MIDI chord system exclusive data (Chord Detect: root and type) are
transmitted (On) or not (Off) from this instrument.
Receive Determines whether MIDI chord system exclusive data (Chord Detect: root and type) are
recognized (On) or not (Off) by this instrument.
Transmit – MIDI Transmit Channel Settings
12
Lets you alternate between two pages.
The dots corresponding to each channel (1–16) flash briefly whenever
any data is transmitted on the channel(s).
MIDI Settings
CVP-909/CVP-905 Reference Manual 99
2Touch [ ] to call up the other page then select which MIDI messages are to be
transmitted for each Part.
The following MIDI messages can be set on the Transmit/Receive display.
Note (Note events) .................. page 74
CC (Control Change)............... page 74
PC (Program Change)............. page 74
PB (Pitch Bend)........................ page 74
AT (Aftertouch) ......................... page 74
The explanations here apply when you call up the “Receive” display in step 2 on page 96. This determines
which Part is used for each MIDI channel when the MIDI data is recognized by this instrument.
1For each Channel, select the Part which is to handle the MIDI data of the
corresponding channel received from the external MIDI device.
When connecting via USB, MIDI data of 32 channels (16 channels x 2 Ports) can be handled by this
instrument. With the exception of the two parts below, the configuration of the parts is the same as those
already explained elsewhere in the Owner’s Manual.
Keyboard: The received note messages control the instrument’s keyboard performance.
Extra Part 1 – 5: These five parts are specially reserved for receiving and playing MIDI data.
Normally, these parts are not used by the instrument itself.
2Touch [ ] to call up the other page then select which MIDI messages are to be
received for each Channel.
Receive – MIDI Receive Channel Settings
12
Lets you alternate between two pages.
The dots corresponding to each channel (1–16) flash briefly whenever any
data is received on the channel(s).
MIDI Settings
CVP-909/CVP-905 Reference Manual 100
The explanations here apply when you call up “On Bass Note” display in step 2 on page 96. The settings here
let you determine the bass note for Style playback, based on the note messages received via MIDI. The note
on/off messages received at the channel(s) set to on are recognized as the bass notes of the chords for Style
playback. The bass note will be detected regardless of the [ACMP ON/OFF] or Split Point settings. When
several channels are simultaneously set to on, the bass note is detected from merged MIDI data received over
the channels.
Touch the desired channel number to enter the checkmark. Touch the same location again to remove the
checkmark.
MIDI transmission/reception via the USB terminal, Wireless LAN, and MIDI
terminals
The relationship between the MIDI terminals, Wireless LAN and the [USB TO HOST] terminal which can
be used for transmitting/receiving 32 channels (16 channels x 2 ports) of the MIDI messages is as follows:
On Bass Note – Setting the Bass Note for Style Playback
USB2
USB1
MIDI transmission
MIDI OUT
terminal
Wireless
LAN
USB TO HOST
terminal
Merge
MIDI/USB1/
Wireless LAN 1 – 16
MIDI reception
MIDI IN
terminal
Port handling
USB2
1 – 16
Wireless
LAN
USB TO HOST
terminal
MIDI/USB1/Wireless LAN 1 – 16
MIDI Settings
CVP-909/CVP-905 Reference Manual 101
The explanations here apply when you call up “Chord Detect” display in step 2 on page 96. The settings here
let you determine the chord type for Style playback, based on the note messages received via MIDI. The note
on/off messages received at the channel(s) set to on are recognized as the notes for detecting chords in Style
playback. The chords to be detected depend on the fingering type. The chord types will be detected regardless
of the [ACMP ON/OFF] or split point settings. When several channels are simultaneously set to on, the chord
type is detected from merged MIDI data received over the channels.
Touch the desired channel number to enter the checkmark. Touch the same location again to remove the
checkmark.
Chord Detect – Setting the Chord Type for Style Playback
CVP-909/CVP-905 Reference Manual 102
Making Global Settings (Utility)
Speaker/Connectivity
Speaker Determines how the sound is output from the speaker of this instrument.
Headphone Switch: Speaker sounds normally, but is cut off when headphones
are inserted to the [PHONES] jack.
•On: Speaker sound is always on.
•Off: Speaker sound is off. You can only hear the instrument sound via the
headphones or an external device connected to the AUX OUT jacks.
Binaural Turns the Binaural Sampling function or the Stereophonic Optimizer function for VRM
Voices on or off.
When the function is on and headphones are connected to the [PHONES] jack, the
sound from the headphones is affected by these functions. However, when
headphones are connected, these functions also affect the sound from the external
speaker connected to the AUX OUT jacks or the sound for Audio recording (by using
the Bluetooth Audio function or USB Audio Interface function), and may result unusual
or unnatural sound. If this happens, turn this function off.
For details about Binaural Sampling and Stereophonic Optimizer, refer to “Using
Headphones” in the “Starting Up” section of the Owner’s Manual.
NOTE If the “Speaker” setting above is “On,” the effect is not applied even when “Binaural” is
set to on.
IAC Turns on or off the IAC (Intelligent Acoustic Control). With this function, the sound
quality of this instrument is automatically adjusted and controlled according to the
overall volume. Even when the volume is low, this lets you hear both low sounds and
high sounds clearly.
IAC Depth Adjusts the IAC depth.
Audio Loopback Determines whether audio input from the connected computer or smart device is
output to a computer or a smart device or not. For details, refer to the Owner’s Manual,
Chapter 10.
AUX IN Noise Gate Turns on or off the Noise Gate which minimizes noise of the sound input via the [AUX
IN] jack.
Making Global Settings (Utility)
CVP-909/CVP-905 Reference Manual 103
Page 1/2
For information about this display, refer to “Changing the Brightness of Display” in the “Starting Up” section of the
Owner’s Manual.
Page 2/2
This function is used to “lock” specific parameters (effect, split point, etc.) to make them selectable only via the
panel control — in other words, instead of being changed via Registration Memory, One Touch Setting, Music
Finder, or Song and sequence data.
To lock the desired parameter, touch the corresponding box to enter the checkmark. To unlock the parameter,
touch the box again.
Display Out Content Determines the video content which is output to a connected external monitor, such as
a television.
• Lyrics/Text: Only the lyrics of the Song or text files (whichever you used last time)
are output, regardless of the display that is called up on the instrument.
•LCD: The currently selected display is output.
Touch Screen/Display
Display Home Theme Touch and change the theme (background) of the Home display.
The available settings are Piano/White/Black.
Time Stamp Determines whether the time stamp of a file is shown on the User tab of the File
Selection display or not.
NOTE When the instrument is connected to a network via the USB wireless LAN adaptor (UD-
WL01), the current time is taken from the network and displayed. For details, refer to
page 110.
Voice
Number
Determines whether or not the Voice bank and number are shown in the Voice
Selection display. This is useful when you want to check which bank select MSB/LSB
values and program change number you need to specify when selecting the Voice
from an external MIDI device.
Pop-up
Display Time
Determines the time that elapses before the pop-up windows close. Pop-up windows
appear when you press buttons TEMPO [−]/[+], TRANSPOSE [−]/[+], SONG
CONTROL [ ] (REW)/[ ] (FF), or REGISTRATION BANK [−]/[+]. When “Hold” is
selected here, the pop-up window is shown until you touch [X].
Transition
Effect
Turns on or off the Transition Effect which is applied when the display is changed.
NOTE Transition effects on the instrument’s display cannot be output.
Voice Area Determines which keyboard parts are shown in the Voice area of the Home display.
When “Show Active Parts Only” is selected, only the active keyboard parts are
shown. When “Show All Parts” is selected, all the keyboard parts are shown.
Parameter Lock
Making Global Settings (Utility)
CVP-909/CVP-905 Reference Manual 104
This lets you execute the Format operation or check the memory capacity (approximate value) of the User
memory or the connected USB flash drive.
The User memory is indicated as “USER,” and the USB flash drives are indicated as “USB 1” or “USB 2,
depending on the number of the connected devices.
To format the drive, select the drive and then touch [Format].
NOTICE
The format operation overwrites any previously existing data. Make sure that the drive you are formatting does not
contain important data. Proceed with caution.
Page 1/2
For information about this display, refer to “Making the Basic Settings” in the “Starting Up” section of the Owner’s
Manual.
Page 2/2
To use Voice Guide, you need to download the Voice Guide (audio) file from the Yamaha website, and save it
to USB flash drive, which you then connect to this instrument. For information on using Voice Guide, refer to
the Voice Guide Tutorial Manual (simple text file).
The Voice Guide (audio) file and the Voice Guide Tutorial Manual are available via the following URL:
https://download.yamaha.com/
Storage
System
Voice Guide Determines whether or not Voice Guide is used (On/Off), when USB flash drive
containing the Voice Guide (audio) file is properly connected to this instrument. This
setting can also be changed by pressing and holding the [DEMO] button for longer than
three seconds.
Voice Guide Controller By holding the controller set here and then pressing the panel button or touching the
item on the display, you can hear the corresponding name (with no execution of the
function).
Voice Guide Volume Adjusts the volume of Voice Guide.
Making Global Settings (Utility)
CVP-909/CVP-905 Reference Manual 105
Factory Reset — Restoring the Factory Programmed Settings
On page 1/2, checkmark the boxes of the desired parameters then touch [Factory Reset] to initialize the
settings of the parameters which are checkmarked.
NOTE If you want to delete all data in the User memory, format the memory via [Menu] [Utility] [Storage] (page 104).
Backup/Restore – Saving and Recalling Your Original Settings as a
Single File –
For the items below, you can save your original settings to the internal User memory or USB flash drive as a
single file for future recall.
1Make all desired settings on the instrument, then call up page 2/2 of the “Factory
Reset/Backup” display.
2As necessary, connect a USB flash drive to the [USB TO DEVICE] terminal.
If you want to save all settings, you can only use the USB flash drive to save the data.
3Touch [Backup] or [Save] of the desired item to save the data.
Factory Reset/Backup
System Restores the System Setup parameters to the original factory settings. Refer to “Parameter Chart”
in the Data List (separate PDF) for details about which parameters belong to the System Setup.
MIDI Restores the MIDI settings including the MIDI templates saved in the internal User memory to the
original factory status.
User Effect Restores the User Effect settings including the following data to the original factory settings.
User Effect types (page 13)
User Master EQ types (page 12)
User Master Compressor types (page 16)
User Vocal Harmony types (page 32)
User Microphone Settings (page 27)
Registration Turns off all the REGISTRATION MEMORY [1] – [8] lamps, indicating that no Registration
Memory Bank is selected although all the Bank files are maintained. In this status, you can create
Registration Memory setups from the current panel settings.
Favorite Removes all files from the Favorite tab on the Voice Selection display and the Style Selection
display.
Making Global Settings (Utility)
CVP-909/CVP-905 Reference Manual 106
Backup/Restore
All settings and data in the User memory of this instrument (except for protected Song) are saved to the
USB flash drive as a single file named “CVP-909.bup” or “CVP-905.bup.”
If you want to contain the Audio Songs (WAV/MP3) saved to the User memory in the same file, enter the
checkmark to the “Include Audio Files” box. If you do not want to save the Audio files because of the large
data size, remove the checkmark.
Setup Files
The following settings are saved as a file individually.
Select the desired destination to save the file, and then touch [Save here]. You can change the file name
as necessary.
To call up the saved data:
Touch [Restore] or [Load] of the desired item, then select the desired file.
If you want to restore the factory programmed settings, select the setup file in the “Preset” tab.
NOTICE
Files including Protected Songs in the User memory of the instrument are replaced by restoring the backup file. Move
or copy the files in the User memory of the instrument to USB flash drive before restoring.
Completing the backup/restore operation may take a few minutes. Do not turn off the power during backup or
restoring. If you turn off the power during backup or restoring, data may be lost or damaged.
System Parameters set on the various displays such as “Utility” are handled as a single System
Setup file. Refer to “Parameter Chart” in the Data List (separate PDF) for details on which
parameters belong to System Setup.
MIDI The MIDI settings including the MIDI templates on the internal User memory are handled as
a single MIDI Setup file.
User Effect The User Effect settings including the following data can be managed as a single file.
User Effect types (page 13)
User Master EQ types (page 12)
User Master Compressor types (page 16)
User Vocal Harmony types (page 32)
User Microphone Settings (page 27)
CVP-909/CVP-905 Reference Manual 107
Connecting to a Bluetooth-equipped
Device
For information about this display, refer to the Owner’s Manual, Chapter 10.
CVP-909/CVP-905 Reference Manual 108
Wireless LAN Settings
This icon is shown only when the USB Wireless LAN adaptor (UD-WL01) is connected to the [USB TO
DEVICE] terminal. Make sure the adaptor is connected before executing any operations.
This instrument can be connected to a smart device via wireless LAN. For general operating instructions, refer
to the “Smart Device Connection Manual” (separate PDF). This section covers only operations that are
specific to this instrument.
When the connection is done successfully, “Connected” is shown at the top of the display, and one of the icons
shown below appears indicating the signal strength.
Infrastructure Mode
Networks Connecting to a network listed on the display:
From the Networks listed on the display, select the desired one. For a network
having a lock icon ( ), you need to enter the password and touch [Connect]; for a
network without a lock icon, you can connect the network only by selecting it.
Manual Setup:
Touch [Other] displayed at the very end of the list to call up the Manual Setup
display, for making SSID, security, and password settings. After entering them,
touch [Connect] on the Manual Setup display to connect to the network.
Update Networks Updates the Network List on the display.
Connect by WPS Connects this instrument to the network via WPS. After touching [Start WPS] in the
window appeared by touching here, press the WPS button of the desired wireless
LAN access point within two minutes.
NOTE Make sure that your access point supports WPS. About the confirmation and
changes in the access point settings, refer to the manual of the access point.
Initialize Initializes the connection setup to the default factory status.
Strong
Weak
Wireless LAN Settings
CVP-909/CVP-905 Reference Manual 109
Detail Lets you set detailed parameters such as the static IP address. After setting, touch
[OK].
Mode Switches to the Access Point Mode.
Access Point Mode
Initialize Initializes the connection setup to the default factory status.
Detail Sets the detailed parameters.
1/3 page: Sets the SSID, security, password, and channel.
2/3 page: Sets the IP address and other related parameters.
3/3 page: Enters the Host name or shows MAC address, etc.
Mode Switches to the Infrastructure Mode.
CVP-909/CVP-905 Reference Manual 110
Making the Time Settings
This icon is shown only when the USB Wireless LAN adaptor (UD-WL01) is connected to the [USB TO
DEVICE] terminal. Make sure the adaptor is connected before executing any operations.
When the instrument is connected to a network and the current time is retrieved from the network successfully,
the current time is displayed above the icon. Make sure to connect by Infrastructure Mode. For details on the
connections, refer to the “Smart Device Connection Manual” (separate PDF).
NOTE When the instrument cannot retrieve the current time from the network, the time displayed will not be correct.
Time Zone Touch to select the Time Zone.
Daylight Saving Time Touch to turn daylight-saving time on or off.
CVP-909/CVP-905 Reference Manual 111
Index
Numerics
3 Band EQ ................................ 26
A
Access Point Mode .................. 109
Amplitude .................................. 50
Any Key .................................... 87
Articulation ................................ 44
Assembly .................................. 59
Assignable ................................ 46
Attack ....................................... 49
Attenuator ................................. 27
Audio File Format ....................... 91
Audio Loopback ....................... 102
Audio Rec Format ...................... 91
B
Backup ................................... 105
Balance ................................ 9, 10
Bar Clear .................................. 61
Bar Copy ................................... 61
Bass Hold ................................. 45
Beat Converter .......................... 60
Binaural .................................. 102
Block Diagram ........................... 17
Bluetooth ................................ 107
Brightness ........................... 10, 49
Bypass ..................................... 64
C
Channel Edit ........................ 60, 76
Chord ....................................... 19
Chord Cancel .............................. 7
Chord Detect ..................... 89, 101
Chord Detection Area ................... 7
Chord Looper ............................ 38
Chord Source ............................ 29
Chord Tutor ................................. 8
Chordal ..................................... 29
Chorus ...................................... 14
Clock ...................... 68, 71, 75, 97
Color ........................................ 19
Compression ............................. 16
Compressor ........................ 15, 26
Cutoff frequency ........................ 49
D
Decay ....................................... 49
Display ................................... 103
Dorian ....................................... 64
Drums ....................................... 82
Dynamics .................................. 61
Dynamics Control ...................... 84
E
Each Key Setting ....................... 80
Echo ........................................ 25
Edit (Song) ............................... 66
Edit (Style) ................................ 53
Edit (Voice) ......................... 47, 51
Effect ................................. 12, 50
EG (Envelope Generator) ........... 49
EQ (Equalizer) .......................... 11
Equalizer .................................. 11
Event Filter ............................... 75
Event List ..................... 68, 71, 74
Expand ..................................... 74
F
Factory Reset ......................... 105
Fade In/Out ............................... 45
Filter .................................. 10, 49
Fingering Type ............................ 6
Follow Lights ............................. 87
Footage .................................... 51
G
Glide ........................................ 44
GM Voice ................................. 83
Grand Expression ...................... 79
Groove ..................................... 60
Guide ................................. 18, 87
Guitar ....................................... 63
H
Harmonic Cont. ......................... 49
Harmonic Content ................ 10, 49
Harmonic Minor ......................... 64
Harmony Assign ........................ 31
Harmony note ........................... 30
Harmony Type .......................... 24
High Key .................................. 65
I
IAC (Intelligent Acoustic Control) 102
Infrastructure Mode .................. 108
Insertion Effect .............. 12, 13, 50
J
Jump ........................................ 88
K
Karao-Key ................................ 87
Key Signature ........................... 19
Keyboard Harmony .................... 24
L
Lead note .................................. 30
Left Hold On/Off ......................... 46
LFO Amplitude .......................... 50
LFO Filter .................................. 50
LFO Pitch .................................. 50
Local Control ............................. 98
Loop Recording ......................... 56
Lyrics .................................. 19, 20
M
Manual Bass ............................... 7
Manual Setup .......................... 108
Master Compressor .................... 15
Master EQ ................................. 11
Master Tune .............................. 92
MegaVoice .......................... 82, 83
Melodic Minor ............................ 64
Metronome ................................ 95
Microphone ............................... 26
MIDI ......................................... 96
MIDI Accordion .......................... 97
MIDI Pedal ................................ 97
MIDI Receive Channel ................ 99
MIDI reception ......................... 100
MIDI Template ........................... 96
MIDI transmission .................... 100
MIDI Transmit Channel ............... 98
Mixer ........................................ 10
Modulation .................... 44, 49, 50
Mono .................................. 46, 48
Mono Type ................................ 48
MP3 ......................................... 91
Multi Assign ............................... 25
Music Notation ........................... 18
N
Natural Minor ............................. 64
Network .................................. 108
Noise Gate ................................ 26
Note ......................................... 19
Note Limit .................................. 65
Note Name ................................ 19
NTR (Note Transposition Rule) .... 63
NTT (Note Transposition Table) ... 64
O
Octave ...................................... 78
On Bass Note .......................... 100
Organ Flutes ....................... 51, 82
Original Beat ............................. 60
OTS Link Timing ........................ 85
CVP-909/CVP-905 Reference Manual 112
Output ...................................... 16
Overdub Recording .................... 56
P
Pan .......................................... 15
Parameter Lock ....................... 103
Part EQ ..................................... 11
Pattern Length ........................... 55
Pedal ........................................ 43
Performance Assistant ................ 89
Phrase Mark Repeat .................. 88
Pitch Bend ................................ 44
Pitch Bend Range ...................... 78
Pitch Detect ............................... 27
Pitch Shift .................................. 65
Play Root/Chord ........................ 63
Playlist ...................................... 33
Poly .................................... 46, 48
Portamento ............................... 44
Portamento Time ................. 48, 78
Punch In/Out ................. 89, 90, 91
Q
Quantize ................. 19, 61, 76, 77
Quick Start ................................ 88
R
Ratio ......................................... 26
Realtime Recording .............. 56, 66
Registration Freeze .................... 37
Registration Memory .................. 35
Registration Sequence ............... 35
Release .................................... 49
Repeat Mode ............................. 88
Resonance ................................ 49
Restore ................................... 105
Retrigger ................................... 65
Reverb ...................................... 14
Root Fixed ................................ 63
Root Trans (Root Transpose) ...... 63
Rotary Speaker .......................... 51
RTR (Retrigger Rule) .................. 65
S
Scale Tune ................................ 92
Scale type ................................. 93
Score ........................................ 18
Scrub ........................................ 88
SFF Edit .................................... 62
SFX .......................................... 82
Shortcut ...................................... 3
Soft .......................................... 44
Song ......................................... 87
Song Creator ............................. 66
Song Position ................ 68, 71, 75
Sostenuto .................................. 44
Source Pattern .......................... 53
Source Root/Chord .................... 63
Speaker .................................. 102
Split Point ............................. 6, 24
Step Recording ................... 59, 66
Stop ACMP ............................... 84
Stroke ...................................... 64
Style ........................................ 84
Style Characteristics .................. 86
Style Creator ............................. 53
Style File Format ....................... 62
Sustain ..................................... 44
Swing ....................................... 60
Synchro Stop Window ................ 85
System Effect ............................ 12
T
Talk ................................... 26, 28
Talk Mixing ............................... 27
Tap Tempo ............................... 95
Temperament ........................... 92
Tempo ........................................ 4
Text ......................................... 22
Texture ..................................... 16
Threshold (Th.) ......................... 26
Time ...................................... 110
Time Signature .......................... 95
Time Stamp ............................ 103
Touch Screen ......................... 103
Touch Sensitivity ................. 48, 94
Touch Sensitivity Depth .............. 48
Touch Sensitivity Offset .............. 48
Transpose ............................ 5, 77
Tremolo .................................... 25
Trill .......................................... 25
Tuning ................................ 78, 92
U
User Effect ...................... 105, 106
Utility ...................................... 102
V
Variation Effect .................... 12, 13
Vibe Rotor ................................ 44
Vibrato ..................................... 49
Vocal Harmony ......................... 28
Vocoder .................................... 29
Vocoder-Mono .......................... 29
Voice ....................................... 78
Voice Characteristics ................. 81
Voice Edit ........................... 47, 51
Voice Guide ............................ 104
Volume ..................................... 15
VRM ........................................ 81
W
WAV ......................................... 91
Wireless LAN .......................... 108
WPS ....................................... 108
X
XG Voice .................................. 83
Y
Your Tempo .............................. 87
© 2023 Yamaha Corporation
Published 02/2023 MW-A0
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Yamaha CVP-905 Guia de referencia

Categoría
Sintetizador
Tipo
Guia de referencia
Este manual también es adecuado para