Sharp 32C530 Manual de usuario

Marca: Sharp

Modelo: 32C530

Categoría: Televisores CRT

Tipo: Manual de usuario

Este manual también es adecuado para

Dimension: 140mm x 215mm

COLOR TELEVISION

H OPERATION MANUAL H

MODEL

32C530

s an

NERGY

TA R

artner, SHARP has determined that this product meets the

NERGY

TAR

guidelines for energy efficiency.

NERGY

TA R

is a

U.S.

registered trademark.

CONTENTS

PAG E

• IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS .................................................... 2–4

• Supplied Accessories ............................................... 5

• Before Operating Your Television .............................. 5

• Antenna Connections ........................................... 5, 6

• Quick Reference Control Operation ......................... 7

• EZ SETUP during First Use ..................................... 8

• Demo Mode .............................................................. 9

• Accessing the MAIN MENU screen without

Remote Control ........................................................ 9

• Language ............................................................... 10

• Sleep Timer ............................................................ 10

• Video Adjust ........................................................... 11

• Audio Select ..................................................... 12, 13

MTS (Multichannel TV Sound) ............................ 12

SPEAKER (Internal Speaker Switch) ................. 12

FAO (Fixed Audio Output) ................................... 12

AUDIO ADJUST ................................................. 13

This operation manual includes basic operating

instructions in Spanish and French.

SPANISH is on page 48–52.

FRENCH is on page 53–57.

PAG E

• Closed Caption ....................................................... 14

• Parent Control .................................................. 15–25

V-CHIP Operation ......................................... 15–22

VIEW TIMER ................................................ 23–25

• Energy Save ........................................................... 26

• Set Up .............................................................. 27–33

EZ Setup ............................................................. 27

Channel Setting ............................................ 28–30

Blue Screen .................................................. 30, 31

Personal Preference ........................................... 32

Universal Plus Function ...................................... 33

• Auto Input ............................................................... 34

• CH/Input ID....................................................... 35, 36

• Screen Format........................................................ 37

• Using the Video and Audio Input Terminals ...... 38, 39

• Using the Audio Output Terminals .......................... 40

• Operation of Universal Remote Control ........... 41–45

• Before Calling for Service ....................................... 46

• Calling for Service .................................................. 46

• Specifications ......................................................... 47

• Limited Warranty .................................................... 59

A775 WJ

POW

32C530(01-04) 2/19/03, 9:14 AM1

Dimension: 140mm x 215mm

Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television

– built for outstanding quality, reliability and performance.

Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed

through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL

so that you may adjust the picture and color to your personal viewing preference.

We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color

Television set for years to come.

Please read these instructions carefully, and keep them handy for your future reference.

Model No.:

Serial No.:

IMPORTANT

To aid reporting in case of loss or theft, please record the TV’s

model and serial numbers in the space provided. The numbers

are located at the rear of the TV.

IMPORTANT INFORMATION

There are two important reasons for prompt warranty registration of your new SHARP television set. Use

the REGISTRATION CARD packed in with the set.

FIRST – WARRANTY

This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor

warranty applicable to your purchase.

SECOND – CONSUMER PRODUCT SAFETY ACT

To assure that you will promptly receive any safety notification on inspection, modification or recall that

SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ

CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.

WHAT IS ENERGY STAR

TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1

billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY

STAR

models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than

$500 million a year in energy savings for consumers.

The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution

that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY

STAR

models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to

eliminating the pollution from more than one million cars.

By using ENERGY STAR

products, you will save money on your electric bills and use less energy. That

makes good economic sense and it’s good for our environment.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO WET LOCATIONS.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with

arrowhead within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to

persons.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are

in the papers with the

appliance.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention

to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the grounding system of the building,

as close to the point of cable entry as practical.”

32C530(01-04) 1/29/03, 12:22 PM2

Dimension: 140mm x 215mm

IMPORTANT INFORMATION (Continued)

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to operate this

equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.

Disposal of these materials may be regulated due to environment considerations. For disposal or

recycling information, please contact your local authorities or the Electronics Industries Alliance:

www.eiae.org

CAUTION: Do not place the AC power cord under the TV set or other heavy items.

CAUTION: Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure

your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand

recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must

not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a

bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television

equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your television dealer or local

power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat

this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it.

IMPORTANT SAFEGUARDS

32C530(01-04) 1/29/03, 12:22 PM3

Dimension: 140mm x 215mm

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the television equipment.

C. If the television equipment has been exposed to rain or water.

D. If the television equipment does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation.

E. If the television equipment has been dropped or the cabinet has been damaged.

F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND

CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

32C530(01-04) 1/29/03, 12:22 PM4

Dimension: 140mm x 215mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VC R

Supplied Accessories

Size AA

Dry Batteries

Infrared Remote Control

RRMCGA035WJSB

Note:

Location

• For normal operation, your TV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are

unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the

radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

•

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

Inserting the batteries

• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the

compartment.

Before Operating Your Television

Battery

Cover

Pull up

Antennas

• The antenna requirements for good color television reception are more important than those for black

& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

Antenna Connections

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

1. A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to

a terminal without tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that

can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied).

27C530(05-06) 1/29/03, 1:47 PM5

Dimension: 140mm x 215mm

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by

the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

75-ohm

coaxial cable

300-ohm

twin-lead

VHF/UHF ANTENNA

300/75-ohm

ADAPTOR

(Not supplied)

REAR PANEL

A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna

Antenna Connections (Continued)

IN OUT

300-ohm

twin-lead

300-ohm

twin-lead

75-ohm coaxial

cable

VHF

ANTENNA

UHF

ANTENNA

COMBINER

(not supplied)

REAR PANEL

OUT

Cable TV converter/

descrambler

(not supplied)

Two-set

signal

splitter

(not

supplied)

Cable TV Line

RF switch (not supplied)

OUT

F-type connector

75-ohm coaxial cable

When connecting the RF cable to the TV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV

set.

(The breaking of internal circuit, etc.)

F-type connector should be finger-tightened only.NOTICE

27C530(05-06) 1/29/03, 1:47 PM6

Dimension: 140mm x 215mm

Quick Reference Control Operation

•

Part Names

Front Panel

Quick Reference Control Operation

Note:

• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the

remote control, place it under a fluorescent light or other lighting.

• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

• The degree of illumination will vary depending on the strength of lighting used.

• The degree of illumination will decrease with time and depending on the temperature.

• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

• Sunlight and fluorescent lighting are the most effective when charging the display.

Basic Remote Control Functions

CHANNEL UP/DOWN

(8) Selects next higher

channel.

(9) Selects next lower

channel.

VOLUME UP/DOWN

(+) Increases sound.

(–) Decreases sound.

POWER

Press → On.

Press again → Off.

SENSOR AREA FOR

REMOTE CONTROL

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

POWER

Press → On.

Press again → Off.

REMOTE KEYPAD

Accesses any channel from keypad.

FLASHBACK

Returns to previous channel.

PERSONAL PREFERENCE

With the Personal Preference buttons,

you can program your favorite

programs by using the 4 categories A,

B, C and D. The channels can be

accessed quickly by using these

buttons. (See page 32.)

VOLUME UP/DOWN

(+) Increases sound.

(–) Decreases sound.

• In menu mode, changes or selects

the TV adjustments.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

CATV/DVD-TV/VCR MODE

SELECT SWITCH

In TV/VCR position, sends power and

channel select commands (Channel

up/down and Random Access buttons)

to the TV and VCR control.

In CATV/DVD position, sends power

and channel select commands to a

cable TV converter and DVD control.

DVD/VCR CONTROL

See page 41.

Infrared Transmitter Window

DISPLAY

Press → Displays receiving channel for

four seconds.

Press again → Removes display.

• Temporarily displays receiving

channel when in Closed Caption

mode.

INPUT

Press → Switch to external video

INPUT 1 mode.

Press 2 times → Switch to external video

INPUT 2 mode.

Press 3 times → Switch to external video

INPUT 3 mode or COMPONENT mode.

Press 4 times → Switch back to the

original TV mode.

See page 39.

ENTER

Used in some instances where a Cable

Converter Box requires an “enter”

command after selecting channels,

when using the REMOTE KEYPAD

button. (See page 41)

CHANNEL UP/DOWN

(8) Selects next higher channel.

(9) Selects next lower channel.

• See pages 28 ~ 30 for channel

presetting.

• Moves the “ [ ” mark of the MENU

screens.

MUTE

Press → Mutes sound.

Press again → Restores sound.

• CLOSED CAPTION appears when

sound is muted.

VIDEO/AUDIO

TERMINALS

INSIDE DOOR

IN 2

32C530(07) 2/18/03, 4:39 PM7

Dimension: 140mm x 215mm

•

When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

Please perform the following instructions before pressing the

POWER button.

(1) Insert the batteries into the remote control. (See page 5)

(2) Connect the antenna cable to the TV set. (See pages 5, 6)

(3) Plug in the AC POWER cord to the wall outlet.

1 Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

3 Press VOL k/l to access the EZ SETUP screen.

4 Press VOL k.

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it

has started, press VOL l and it will be canceled.

If you want to SET UP again, please refer to page

27 on SET UP.

To cancel EZ SETUP

Press VOL l.

5 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to page 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

SELECT

ENGL I SH

FRANCA I S

SELECT : CH

SET : VOL

+ –

ESPAÑOL

LANGUAGE

SELECT

ENGL I SH

FRANCA I S

SELECT : CH

SET : VOL

+ –

ESPAÑOL

LANGUAGE

START

STOP START

SETUP?EZ

OR CABL E.CONNECT ANT ENNA

STOP START

PLEASE WAI T

125

AUTO PROGRAMMI NG

VOL

—

VOL

1 2 3

4 5 6

7 8 9

100

FLASHBACK

ENTER

PERSONAL PREFERENCE

POWER

DVD

VCR

MENU MUTE

CATV TV

DVD VCR

DISPLAY

INPUT

VOL

—

VOL

ABCD

POWER

(EZ SETUP screen)

EZ SETUP during First Use

(On the Set)

(On the Remote Control)

(SELECT LANGUAGE screen)

(START)

(STOP)

VOL

—

POWER

CHANNEL

UP (a)/

DOWN (s)

VOLUME

(

)/(

)

32C530(08-09) 1/29/03, 1:43 PM8

Dimension: 140mm x 215mm

Demo Mode

• To learn more about the TV set, you can enter DEMO mode. Simply

press and hold MENU on the TV set for more than 3 seconds.

• To cancel DEMO mode, again press MENU on the TV set.

Example:

DEMO mode display

Accessing the MAIN MENU screen without Remote Control

• If you misplaced your Remote Control you can still access most settings

via the MAIN MENU screen by pressing MENU on the TV set.

• Some features of your TV set are not accessible without the Remote

Control. If you lost your Remote Control, contact a Sharp Service

Center for a replacement.

(On the Set)

button

32C530(08-09) 2/18/03, 4:40 PM9

Dimension: 140 X 215 mm

•

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press CH a/s

to move the “E” mark to “LANGUAGE”.

4 Press VOL k/l to access the LANGUAGE select screen.

5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

“FRANCAIS (FRENCH)”.

6 Press MENU to exit.

Sleep Timer

•

You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.

1 Press MENU to access the MAIN MENU screen.

2 Press VOL k/l to access the SLEEP TIMER screen.

3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.

4 Press MENU to exit.

Note:

• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”

during step 3.

• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular

intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER

turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a

similar display for each remaining minute and a 10-second display right before shutting off the TV.

• If you turn the POWER OFF, the SLEEP TIMER will automatically reset.

Language

(SLEEP TIMER screen)

(LANGUAGE select screen)

(MAIN MENU screen)

→

(SET UP screen)

→

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

ENGL I SH

FRANCA I S

ESPAÑOL

LANGUAGE

ENGL I SH

FRANCA I S

ESPAÑOL

IDIOMA

SLEEP T IMER

120M REMAIN

BL UE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UNIVERSAL

LANGUAGE

CH SETT I NG

CH / I NPUT I D

AUTO I NPUT

PL US

SET UP

VOL

—

VOL

—

VOL

—

VOL

—

VOL

32C530(10-11) 1/29/03, 1:55 PM10

Dimension: 140 X 215 mm

•

Description of Adjustment Items

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “VIDEO ADJUST”.

3 Press VOL k/l to access the PICTURE adjust screen.

4 Press CH a/s

to select the desired adjustment item. (Refer to the

diagram below.)

5 Press VOL k/l to adjust the setting.

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit.

Note:

• VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes.

• VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

(PICTURE adjust screen)

→

VOL k

increases contrast

VOL l

decreases contrast

(MAIN MENU screen)

Video Adjust

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

PICTURE

TINT

COLOR

SHARP

COLOR TEMP.

RESET

: CH s

: CH a

BRIGHT

PICTURE 50

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

FLASHBACK

DISPLAY

INPUT

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

VOL

—

VOL

—

VOL

Selected item VOL

button VOL

button

PICTURE To increase contrast To decrease contrast

TINT To make skin tones greenish To make skin tones purplish

COLOR To increase color intensity To decrease color intensity

BRIGHT To increase brightness To decrease brightness

SHARP To increase sharpness To decrease sharpness

COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.

RESET To return all adjustments to factory preset levels.

32C530(10-11) 1/29/03, 1:55 PM11

Dimension: 140 X 215 mm

H MTS (Multichannel TV Sound)

This function allows reception of stereo or bilingual TV sound.

•

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts

Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.

SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

•

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode.

H SPEAKER (Internal Speaker Switch)

This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from

external speakers by using the AUDIO OUTPUT Terminals. (See page 40).

H FAO (Fixed Audio Output)

This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the

AUDIO OUTPUT Terminals. (See page 40). With FAO, the TV’s volume control is disabled.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “AUDIO SELECT”.

3 Press VOL k/l

to access the AUDIO SELECT screen.

4 Press CH a/s

to move the “E” mark to “MTS”, “SPEAKER”, “FAO”

or “AUDIO ADJUST”.

5 Press VOL k/l

to select “STEREO”, “SAP” or “MONO” when the

“E” mark is at “MTS” position.

Audio Select

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

AU I ODSEECTL

SPEAKER

MTS

FAO

:OFF

:ON

:STEREO

AUD I D J USTOA

AU I ODSEECTL

SPEAKER

MTS

FAO

:OFF

:ON

:STEREO

AUD I D J USTOA

VOL

—

VOL

(MAIN MENU screen)

→

(AUDIO SELECT screen)

→

(AUDIO SELECT

screen

)

MTS

STEREO

SAP

MONO

SPEAKER

OFF

FAO

OFF

32C530(12-13) 1/29/03, 2:01 PM12

Dimension: 140 X 215 mm

H AUDIO ADJUST

When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to

access the AUDIO ADJUST screen. To access the desired item,

press CH a/s. To adjust the audio setting, press VOL k/l.

6 Press MENU to exit.

An example screen displaying ON AIR when receiving stereo broadcasts

Current channel number

“← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts.

Note:

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.

• Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source.

• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will

not affect “FAO” mode.

Audio Select (Continued)

STEREO

SAP

AIR

MONO

(CHANNEL call on screen)

TREBLE

RESET

BASS

BALANCE

Selected item VOL k button VOL l button

TREBLE To increase treble response. To decrease treble response.

BASS To increase bass response. To decrease bass response.

BALANCE To emphasize the right To emphasize the left

speaker’s volume. speaker’s volume.

RESET To return all adjustments to factory preset levels.

TREBL E 0

32C530(12-13) 1/29/03, 2:01 PM13

Dimension: 140 X 215 mm

•

How to set CLOSED CAPTION

• Your TV is equipped with an internal Closed Caption decoder. “Closed

Caption” is a system which allows conversations, narration, and sound

effects in TV programs and home videos to appear as captions on the

TV screen (see the illustration).

• Not all the programs and videos will offer closed captioning. Please

look for the “

” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION

and TEXT. For each mode, two channels are available, CH1 and CH2:

The CAPTION mode shows subscripts of dialogs and commentaries

of TV dramas and news programs while allowing clear view of the

picture.

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “CLOSED CAPTION”.

3 Press VOL k/l to access the CLOSED CAPTION setting screen.

4 Press CH a/s

to move the “E” mark to either “MODE” or “DATA”.

5 Press VOL k/l to change the CLOSED CAPTION setting.

6 Press MENU to exit.

Note:

• If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION

mode automatically. Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with

your TV.

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.

CLOSED

MODE

CAPT I ON

: CAPT I ON

DA T A

: CH 1

DATA : CH 1

: CAPT I ONMOD E

CLOSED CAPT I ON

CLOSED

MODE

CAPT I ON

: CAPT I ON

DA T A

: CH 1

CAPTION

TEXT

OFF

CH 1

CH 2

→

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

PERSONAL PREFERENCE

MENU MUTE

CATV TV

DVD VCR

VOL

—

VOL

ABCD

VOL

—

VOL

—

VOL

Closed Caption

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(MAIN MENU screen)

(CLOSED CAPTION setting screen)

MODE :

DATA :

32C530(14-16) 1/29/03, 2:01 PM14

Dimension: 140 X 215 mm

1. User setting 2. Block table

age

based

not to

block

not to

block

Select

block

auto-

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

1. User setting 2. Block table

age

based

not to

block

not to

block

not to

block

Select

block

auto-

block

auto-

block

PG-13

NC-17

– – – – –

BLOCK

PG-13

NC-17

Parent Control (V-CHIP Operation)

H V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

• Restriction of TV programs includes two characters that contain information about the program’s MPAA

rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted

by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for

complete control.

[1] MPAA RATING

RATING

G GENERAL AUDIENCES. All ages admitted.

PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

children under 13.

R RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NC-17 NO ONE 17 AND UNDER ADMITTED.

X X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie’s data.Note:

• MPAA RATING

Example 1:

“PG-13” in the age-based rating is blocked, this

will automatically block the higher ratings “R”,

“NC-17”, “X” also.

Note:

• MPAA RATING is only age-based.

[2] TV PARENTAL GUIDELINES

content based

AGE D L S V FV

(Sexually (Adult (Sexual (Violence) (Fantasy

Suggestive Language) Situation) Violence)

Dialog)

TV-Y (All children)

–––––

TV-Y7 (Direct to Older Children)

––––

TV-G (General Audience)

–––––

TV-PG (Parental Guidance

V V V V V

–

Suggested)

TV-14 (Parents Strongly

V V V V V

–

Cautioned)

TV-MA (Mature Audience Only)

–

V V V

–

: Content Rating can be set.

l : Content Rating cannot be set (not normally broadcast by TV station).

Example 2:

“R” in the age-based rating is blocked, this will

automatically block the higher rating “NC-17”, “X”

also.

age

based

RATING

age

based

32C530(14-16) 1/29/03, 2:01 PM15

Dimension: 140 X 215 mm

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

Example 1.1 : Age Based setting

Clear

s (block) from each "AGE" box for all ratings.

This will automatically unblock everything.

Example 1.2 : Age Based setting

For “TV-G” put a

in the "AGE" box. This will automatically block the

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Please note the content ratings “D”, “L”, “S”, “V” are automatically blocked

as well.

Example 2.1 : Content Based setting

If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),

clear the

(block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

MA”.

Example 2.2 : Content Based setting

Put a

in the box corresponding to “TV-PG” (row) and “V (Violence)”

(column). This will automatically block the “V” boxes for “TV-14” and

“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block

all programs rated “TV-PG”, “TV-14” or “TV-MA”.

Example 3 : Resetting an Age Based setting

For “TV-14”, put a

(block) in the “AGE” box.

This will again automatically block the content ratings “D”, “L”, “S”, “V”

for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).

Please note that the lower age rating “TV-PG” does not change from its

previous settings after this.

Note:

• Content ratings can be modified but only in the combinations indicated by

in the table on page 15.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

• For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the

in the “AGE” box (unblock) you can still

change settings based on content.

• Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be

downloaded when they become available. (See page 19.)

TV–Y

TV–Y7

TV–G

TV–PG

TV– 1 4

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

VVVV

VVV

BLOCK

VIEW

–

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

TV– Y

TV– Y7

TV– G

TV– PG

TV– 14

TV–MA

MENU : RE T URN

GAE

–

BLOCK

VIEW

32C530(14-16) 1/29/03, 2:01 PM16

Dimension: 140 X 215 mm

•

How to set V-CHIP

[1] MPAA RATING

1 Press MENU to access the MAIN MENU screen.

2 Press CH

a/s to move the “E” mark to “PARENT CONTROL”.

3 Press VOL

k/l to access the PARENT CONTROL screen.

4 Press VOL

k/l to access the V-CHIP select screen.

Note:

• If SECRET No. is already set, enter the SECRET No.

(See

•

To change the V-CHIP BLOCK after

registering a secret No. on page 22.).

5 Press VOL

k/l to select “MPAA”. Press CH

a/s to move the

“E” mark to “PG”, then press VOL

k/l to select BLOCK. If you

set “PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically

blocked.

6 Press MENU to return to the V-CHIP select screen.

(PARENT CONTROL screen)

(V-CHIP select screen)

(MAIN MENU screen)

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

V I EW T I MER

V– CH I P BLOCK

PARENT CONTROL

MP AA

TV GU I DEL I NES

AD : OF FDOWNLO

STATUS :OFF

PG– 13

NC– 17

B: LOCK

–: ––––

MENU : RET URN

VOLUME

(

)/(

)

CHANNEL

UP (a)/

DOWN (b)

→

Parent Control (V-CHIP Operation) (Continued)

→

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

32C530(17-18) 1/29/03, 2:01 PM17

Dimension: 140 X 215 mm

7 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

• If SECRET No. is already set, skip to step 9.

8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

When done, press MENU

to exit.

Note:

• If you set “G” to BLOCK , all ratings are automatically blocked.

• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

[2] TV GUIDELINES

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH

a/s to move the “E” mark to “TV GUIDELINES”.

3 Press VOL

k/l to access the TV GUIDELINES screen.

4 To change AGE and CONTENT SETTING, press CH

a/s to move

the “E” mark to the desired rating and then press VOL

k/l

select.

5 Press CH

a/s to move the “E” mark to the desired content item

and then press VOL

k/l to select either “BLOCK” or “– – – – –”

(unblock).

6 Press MENU

to return to the TV GUIDELINES screen.

7 Repeat steps 4 to 6 until all ratings and their contents are set.

When done, press MENU

to return to V-CHIP selct screen.

9 Press MENU to exit.

Note:

• If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.

→

Parent Control (V-CHIP Operation) (Continued)

(TV GUIDELINES screen)

(CONTENT RATING screen)

(V-CHIP select screen)

321

654

987

100

ENTER

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

MP AA

TV GU I DEL I NES

AD : OF FDOWNLO

STATUS :OFF

TV– Y

TV– Y7

TV–G

TV– PG

TV– 14

TV–MA

MENU : RET URN

GAE

–

BLOCK

VIEW

–

TV–Y7

B LOCK

–––––

MENU : RET URN

TV– Y

TV– Y7

TV–G

TV– PG

TV– 14

TV–MA

MENU : RET URN

GAE

–

––

–

VVVV

VVV

BLOCK

VIEW

VOL

—

VOL

—

VOL

→

VOL

—

VOL

32C530(17-18) 1/29/03, 2:01 PM18

Dimension: 140 X 215 mm

Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation) (Continued)

[3] Downloading additional rating mode

There will be an additional new rating system. In that case,

please set up as follows. Subsequently the new rating

system will set up automatically.

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “DOWNLOAD”.

3 Press VOL k/l to select “DOWNLOAD : ON”.

4 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 6.

5 Enter a 4-digit secret No. using the REMOTE KEYPAD.

6 Press MENU to exit.

•

Downloading V-CHIP data

1 If you watch a program containing “new rating system data”, the

DOWNLOAD screen will be displayed.

2 The DOWNLOAD screen will disappear, once downloading is finished.

Note:

•

DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.

MP AA

TV GU I DEL I NES

AD : OF FDOWNLO

STATUS :OFF

MP AA

TV GU I DEL I NES

AD : ONDOWNLO

STATUS :OFF

PL AESE AWTI

NOW DOWNLOADI

V– CH I P DATA

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

REMOTE

KEYPAD

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

—

VOL

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

321

654

987

100

ENTER

(DOWNLOAD screen)

32C530(19-22) 1/29/03, 2:02 PM19

Dimension: 140 X 215 mm

•

How to set additional rating mode (Example)

Once downloading is complete, you can set the blocking pattern as follows.

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “Cdn. English Ratings”,

then press VOL k/l.

3 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH a/s and VOL k/l.

4 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH a/s and VOL k/l if you select “Cdn. French

Ratings” in step 2.

Note:

• You are able to download up to 4 different rating systems.

MPAA

TV GU I

Cdn .

DOWN L

nEglis Rhatinsg

Cdn .

rFenchRatinsg

EDLINES

OAD : ON

STATU

S:ON

(After downloading the

rating data)

C8+

14+

18+

INDIV

B: LOCK

–: ––––

B: LOCK

–: ––––

B: LOCK

–: ––––

IDUAL BL

MENU : RET URN

OCK

(ENGLISH INDIVIDUAL

BLOCK screen)

13+

16+

18+

INDIV

–: ––––

B: LOCK

–: ––––

B: LOCK

–: ––––

IDUAL BL

MENU : RET URN

OCK

(FRENCH INDIVIDUAL

BLOCK screen)

→

VOL

—

VOL

—

VOL

—

VOL

→

Parent Control (V-CHIP Operation) (Continued)

32C530(19-22) 1/29/03, 2:02 PM20

Dimension: 140 X 215 mm

•

Activating the V-CHIP BLOCK

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “STATUS”. Press VOL k/

l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP

BLOCK will not operate.)

3 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 5.

4 Enter a 4-digit secret No. using the REMOTE KEYPAD.

5 Press MENU and the secret No. will be registered.

•

To temporarily cancel the V-CHIP BLOCK

1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program

with the same program rating data you configured.

Note:

•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-

CHIP BLOCK will be canceled temporarily. If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” will be displayed. Input

the secret No. again in this case.

Note:

• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.

VOL

—

VOL

→

321

654

987

100

ENTER

MPAA

TV GU I

DOWN L

EDLINES

OAD : OFF

STATU

S:ON

I NPU T

––––

SECRET No .

I NPU T

1234

SECRET No .

Parent Control (V-CHIP Operation) (Continued)

321

654

987

100

ENTER

V– CH I P

TV–Y7

HAS BEEN ACT I VATED

I NPU T

––––

SECRET No .

I NPUT SECRET No .

(V-CHIP select screen)

32C530(19-22) 1/29/03, 2:02 PM21

Dimension: 140 X 215 mm

•

To change the V-CHIP BLOCK setting after registering a secret No.

1 Repeat steps 1 to 4 of [1] MPAA RATING, then “INPUT SECRET

No.” will be displayed.

2 Enter the 4-digit secret No. using the REMOTE KEYPAD and

the V-CHIP select screen will be displayed. Set V-CHIP BLOCK

again.

•

If you forget or need to change your secret No., clear the original secret No. and set

up a new one.

1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then “INPUT SECRET

No.” will be displayed.

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the message “INPUT SECRET No.”

disappears.

3 Press the MENU button twice to exit.

I NPUT

––––

SECRET No .

I NPUT SECRET No .

321

654

987

100

ENTER

Parent Control (V-CHIP Operation) (Continued)

(On the Set)

VOL k and CH a

buttons

32C530(19-22) 2/18/03, 4:43 PM22

Dimension: 140 X 215 mm

H VIEW TIMER

This function allows you to restrict TV viewing time and also allows you to control TV usage.

This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time

duration while the TV power is on.)

• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10

hours) in 30 minutes intervals.

OFF TIME (Restricts TV viewing after the VIEWING TIME reaches

zero.)

• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)

in 30 minutes intervals.

STATUS (Select ON to activate VIEW TIMER)

•

How to set VIEW TIMER

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “PARENT CONTROL”.

3 Press VOL k/l to access the PARENT CONTROL screen.

4 Press CH a/s

to move the “E” mark to “VIEW TIMER”.

5 Press VOL k/l to access “VIEW TIMER”.

6 Press CH a/s

to select “VIEWING TIME” and “OFF TIME”. For

each selection, press the VOL k/l to set the time duration.

7 Press CH a/s

to select “STATUS”. Press the VOL k/l to turn

ON the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not

operate.)

8 Press MENU. “INPUT SECRET No.” will be displayed.

Note:

•

If SECRET No. is already set, skip to step 10.

Parent Control (VIEW TIMER)

(MAIN MENU screen)

(PARENT CONTROL screen)

VIEWING

––H

TIME

OFF

––H

––M

TIME

STATUS : OFF

V I EW T I MER

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

V –CH I P BLOCK

PARENT CONTROL

VIEW TIMER

VIEWING

––H

TIME

OFF

––H

––M

TIME

STATUS : OFF

V I EW T I MER

→

VOL

—

VOL

→

VOL

—

VOL

→

VOL

—

VOL

—

VOL

VIEWING

TIME

OFF

––H

00M

––M

TIME

STATUS : OFF

V I EW T I MER

VIEWING

TIME

OFF

00M

5H 00M

TIME

STATUS : ON

V I EW T I MER

I NPU T

––––

SECRET No .

32C530(23-26) 1/29/03, 2:02 PM23

Dimension: 140 X 215 mm

Parent Control (VIEW TIMER) (Continued)

9 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

Press MENU to exit.

Example:

• To restrict anybody from watching TV for more than 5 hours, after watching

the TV for 2 hours, your settings would look like the one on the right.

• You can choose to watch the 2 hours of TV as you wish. For example, you

could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV

on and watch the remaining 1 hour of the VIEWING TIME.

•

To change the VIEW TIMER setting after registering a secret No.

1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press

VOL k/l, and “INPUT SECRET No.” will be

displayed.

2 Enter the 4-digit SECRET No. using the REMOTE

KEYPAD, and the VIEW TIMER access screen will

be displayed. Repeat steps 5, 6.

Note:

• When you choose the correct secret No., the VIEW TIMER access screen

is displayed. If the wrong secret No. is chosen, “SECRET No. IS

INCORRECT” is displayed. Input the secret No. again in this case.

•

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW

TIMER is set.)

1 Turn on the TV; a blue screen message “TIME OVER” will appear. If

you do nothing, the TV will turn off in approximately 30 seconds.

2 Enter the 4-digit secret No. using the REMOTE

KEYPAD. When you choose the correct secret No.,

the VIEW TIMER is canceled. If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” is

displayed. Input the secret No. again in this case.

→

VIEWING

TIME

OFF

00M

5H 00M

TIME

STATUS : ON

V I EW T I MER

321

654

987

100

ENTER

321

654

987

100

ENTER

321

654

987

100

ENTER

VOL

—

VOL

I NPU T

1234

SECRET No .

I NPU T

––––

SECRET No .

SECRE T I S I NCORRECTNo .

T I ME OVER

I NPU T

––––

SECRET No .

T I ME OVER

I NPUT SECRET No .

32C530(23-26) 1/29/03, 2:02 PM24

Dimension: 140 X 215 mm

Parent Control (VIEW TIMER) (Continued)

•

To cancel the VIEW TIMER setting or change the secret No. (If

you forget the SECRET No.)

1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL k/l,

and “INPUT SECRET No.” will be displayed.

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the VIEW TIMER access screen is displayed.

Now you can cancel the VIEW TIMER settings or change the

SECRET No. while “INPUT SECRET No.” is displayed.

•

Notice of Remaining VIEWING TIME

• For every 30 minute interval, the remaining time will be displayed for

4 seconds. For the last 5 minutes, the remaining time will be displayed

every minute.

• “0 REMAIN” will be displayed for 10 seconds just before the VIEWING

TIME expires.

REMAIN

30M

VIEWING TIME

REMAIN

05M

VIEWING TIME

REMAIN

VIEWING TIME

(On the Set)

VOL k and CH a

buttons

VOL

—

VOL

I NPUT

––––

SECRET No .

32C530(23-26) 2/18/03, 4:44 PM25

Dimension: 140 X 215 mm

Energy Save

•

This feature lets you lower the power consumption of your TV

set which in turn saves you money and minimizes the impact on

the environment. When this feature is turned on, it reduces the

brightness of the TV to a level that consumes approximately 20

percent less energy than when the feature is turned off.

The reduction in brightness will be less noticeable under low

room lighting conditions.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s

to move the “E” mark to “ENERGY SAVE”.

3 Press VOL k/l to access the ENERGY SAVE select screen.

4 Press VOL k/l to select “ON”.

5 Press MENU to exit.

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(MAIN MENU screen)

(ENERGY SAVE select screen)

→

VOL

—

VOL

—

VOL

PERSONAL PREFERENCE

MENU MUTE

CATV TV

DVD VCR

VOL

—

VOL

ABCD

ENERGY SAVE : ON

ENERGY SAVE : OFF

SLEEP T IMER

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

32C530(23-26) 1/29/03, 2:02 PM26

Dimension: 140 X 215 mm

H EZ Setup

By operating the channel preset functions, you can preset your

TV to the desired channels for viewing.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “CH SETTING”.

4 Press VOL k/l to access the CH SETTING screen.

5 Press VOL k/l to access the EZ SETUP screen.

6 Press VOL k.

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

If you want to stop the EZ SETUP process once it

has started, press VOL l. Search will be canceled.

To cancel EZ SETUP

Press VOL l.

7 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Set Up

(MAIN MENU screen)

→

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(EZ SETUP screen)

(CH SETTING screen)

(SET UP screen)

→

BLUE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

A I R / CABL E

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

STOP START

PLEASE WA I T

125

AUTO PROGRAMM I NG

START

STOP START

SETUP?EZ

OR CA B L E .CONNECT AN T ENNA

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

—

VOL

—

VOL

(START)

(STOP)

VOL

—

32C530(27-28) 1/29/03, 2:25 PM27

Dimension: 140 X 215 mm

Set Up (Continued)

H Channel Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below

to manually memorize the channel.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen.

4 Press CH a/s to move the “E” mark to “CH SETTING”.

5 Press VOL k/l to access the CH SETTING screen.

6 Press CH a/s to move the “E” mark to “AIR/CABLE”, then press

VOL k/l to access the AIR/CABLE screen.

7 Press CH a/s to move the “E” mark to the desired mode.

8 Press MENU to exit.

Note:

• Receivable channels of your TV set are:

AIR channels: CABLE channels:

VHF: 2 through 13. 1 (HRC and IRC mode only)

UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)

(MAIN MENU screen)

(CH SETTING screen)

(SET UP screen)

(AIR/CABLE screen)

→

BLUE SCREEN

SCREEN FORMAT

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

A I R/ CABL E

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

CABLE

A I R / CABL E

CABLE HRC

CABLE I RC

AIR

STD

AIR

CABLE STD

CABLE HRC CABLE IRC

A I R / CABL E

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

—

VOL

—

VOL

32C530(27-28) 1/29/03, 2:25 PM28

Dimension: 140 X 215 mm

•

Saving broadcast TV channels into memory

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

3 Press VOL k/l to access the CH SETTING

screen.

4 Press CH a/s to move the “E” mark to “CH

SEARCH”, then press VOL k/l to access

the CH SEARCH screen.

To start:

Press VOL k. The tuner will search through

all available channels in your area and add

them into the TV memory.

To stop:

Press VOL l. CH SEARCH will stop at the

current channel and will not add any higher

channels.

5 Press MENU to exit.

Note:

• If you press VOL k again while in the CH SEARCH mode, auto-

program will start again, and the previously memorized channels will

be lost.

•

Adding weak or additional channels or erasing unwanted channels from TV memory

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

3 Press VOL k/l to access the CH SETTING

screen, then press CH a/s to move the “E”

mark to “CH MEMORY”.

4 Press VOL k/l to access CH MEMORY.

5 Use CH a/s or REMOTE KEYPAD to select

each desired channel to add or erase.

(CH SETTING screen)

(CH SEARCH screen)

A I R / CABL E

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

STOP START

CH SEARCH

AIR 10

A I R / CABL E

CH SEARCH

CH MEMORY

EZ SETUP

CH SETT I NG

→

(START)

(STOP)

→

321

654

987

100

ENTER

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

—

VOL

Set Up (Continued)

32C530(29-30) 1/29/03, 2:25 PM29

Dimension: 140 X 215 mm

6 Press VOL k to add a channel to the TV

memory or press VOL l to erase a channel

from the TV memory.

7 Press MENU to exit.

H BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not

received. After 15 minutes of non-reception, the TV will turn off

automatically.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen.

4 Press VOL k/l to access the BLUE SCREEN select screen.

5 Press VOL k/l to select “ON”.

VOL k

To add channel 10 to

the TV memory

VOL l

To erase channel 10 from

the TV memory

(CH MEMORY

memorized channel)

(CH MEMORY

unmemorized channel)

AIR

ERASE ADD

MEMORYCH

AIR

ERASE ADD

MEMORY

(MAIN MENU screen)

(SET UP screen)

(BLUE SCREEN select screen)

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

BLUE SCREEN : OFF

BLUE SCREEN : ON

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

→

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

FLASHBACK

DISPLAY

INPUT

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

—

VOL

—

VOL

Set Up (Continued)

VOL

—

VOL

32C530(29-30) 1/29/03, 2:25 PM30

Dimension: 140 X 215 mm

6 Press MENU to exit.

When the BLUE SCREEN is set to “ON”

Note:

• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function

despite the presence of a broadcast signal. To continue watching TV under these conditions, switch

the BLUE SCREEN “OFF”.

• While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if

BLUE SCREEN is turned on.

Set Up (Continued)

No signal

after 15

minutes

Power turns off

automatically

Blue screen

Standby mode

32C530(31-33) 1/29/03, 2:26 PM31

Dimension: 140 X 215 mm

Set Up (Continued)

H Personal Preference

By setting PERSONAL PREFERENCE channels in advance, you

can select your favorite channels easily.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “PERSONAL PREF.”.

4 Press VOL k/l to select the PERSONAL PREFERENCE select

screen in which you can program 4 favorite channels, in 4 different

categories. (total of 16 channels)

5 Press VOL k/l and CH a/s to move the “E” mark to the desired

position.

6 Press REMOTE KEYPAD on the Remote to input the CHANNEL

Number into memory. Press INPUT on the

Remote to register the INPUT mode into memory.

Example: 125 — Press “100” followed by “2” and then “5”.

25 — Press “2” and then “5”.

4 — Press “0” and then “4”.

To reset a registered CHANNEL Number, input “0” twice.

7 Repeat steps 5 and 6 to register the next CHANNEL Number or INPUT mode.

8 Press MENU to exit.

To select the PERSONAL PREFERENCE channel.

If the channels are memorized as shown on the right,

press the Remote’s “A” button to select the channels below.

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(MAIN MENU screen)

REMOTE

KEYPAD

PERSONAL

PREFERENCE

(SETUP screen)

(PERSONAL PREFERENCE select screen)

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

PERSONAL PREF.

<A>

–––

PERSONAL PREF.

<A>

–––

PERSONAL PREF.

<A>

125

–––

PERSONAL PREF.

<A>

125

123

–––

321

654

987

100

ENTER

→

VOL

—

VOL

→

VOL

—

VOL

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

125 25 40 4

VOL

—

VOL

and

32C530(31-33) 1/29/03, 2:26 PM32

Dimension: 140 X 215 mm

Set Up (Continued)

H Universal Plus Function

VCR or DVD input mode will be selected automatically by pressing

the VCR/DVD PLAY button on the Remote Control.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen.

4 Press CH a/s to move the “E” mark to “UNIVERSAL PLUS”.

5 Press VOL k/l to access the UNIVERSAL PLUS select screen

to select VCR or DVD mode.

6 Press CH a/s to select the VCR or DVD, and press VOL k/l to

select “CH3”, “CH4”, “INPUT 1”, “INPUT 2”, “INPUT 3

(COMPONENT)” or “OFF”.

CH3 CH4 INPUT 1

OFF

INPUT 3 (COMPONENT )

INPUT 2

Switch to the input mode your VCR or

DVD is connected to. If connected

through RF (antenna terminal), select

either CH3 or CH4 to match the setting

of the VCR or DVD.

7 Press MENU to exit.

(SET UP screen)

(MAIN MENU screen)

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

(UNIVERSAL PLUS select screen)

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

SCREEN FORMAT

PLUS

SET UP

DVD :OFF

:OFFVCR

UN I V E RS A L PLU S

DVD :OFF

:CH3VCR

UN I VERSAL PLUS

→

VOL

—

VOL

—

VOL

MENU MUTE

REW PLAY FF

VOL

—

VOL

CATV TV

DVD VCR

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

→

DVD/VCR

PLAY

32C530(31-33) 1/29/03, 2:26 PM33

Dimension: 140 X 215 mm

Auto Input

•

The unit is preset to switch to the INPUT 2 screen automatically

when VIDEO equipment is connected to the INPUT 2 terminal. Do

the following to switch this feature off:

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “AUTO INPUT”.

4 Press VOL k/l to access the AUTO INPUT select screen.

Press VOL k/l to select “AUTO”.

5 You may turn off “AUTO INPUT” when it is not in use.

Press VOL k/l to select “OFF”.

6 Press MENU to exit.

PERSONAL PREFERENCE

MENU MUTE

CATV TV

VOL

—

VOL

ABCD

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

VOL

—

VOL

—

VOL

—

VOL

→

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

BLUE SCREEN

SET UP

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SCREEN FORMAT

(MAIN MENU screen)

(SET UP screen)

AUTO I NPUT

(INPUT2)

: AUTO

(AUTO INPUT select screen)

AUTO I NPUT

(INPUT2)

: OFF

→

32C530(34-37) 1/29/03, 2:26 PM34

Dimension: 140 X 215 mm

CH/Input ID

•

You can assign an ID label to each channel or input mode. These

ID labels can be 4 characters long maximum and will be displayed

along with the channel number/input mode when the labeled

channel is selected.

(Example: labeling air channel 10 “TV12”.)

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen then press

CH a/s to move the “E” mark to “CH/INPUT ID” .

4 Press VOL k/l to access the CH/INPUT ID screen.

→

(MAIN MENU screen)

(SET UP screen)

(CH/INPUT ID screen)

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

VOL

—

VOL

—

VOL

CH I NPUT I D/

AIR 10

:____

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

PLUS

SET UP

SCREEN FORMAT

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

VOLUME

(

)/(

)

CHANNEL

UP (

DOWN (

)

REMOTE

KEYPAD

32C530(34-37) 1/29/03, 2:26 PM35

Dimension: 140 X 215 mm

CH/Input ID (Continued)

5 Use CH a/s or REMOTE KEYPAD to select each desired channel

to label.

Press INPUT on the Remote to label the INPUT mode.

ID: Labeling the channel name

Press VOL k/l to select “ID” then press VOL k to select the

first character. Press CH a/s to enter a desired letter. Press

VOL k/l to enter the next desired letter. Press MENU to return

to the CH/INPUT ID screen.

Selectable characters:

Space: _

Alphabets: A-Z

Numbers: 0-9

Symbols: — . & ( ) / +

RESET: Resetting the ID to “_ _ _ _”

Press CH a/s to move the “E” mark to “RESET”, then press

VOL k/l. The previously set ID will return to “_ _ _ _”.

6 Press MENU to exit.

Note:

• The maximum number of ID labels available to register channel names is 20 for AIR channels and 40

for CABLE channels.

• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID

to make room.

VOL

—

VOL

RESET

: T V 1 2

MENU : RETURN

RESET

: _ _ _ _

MENU : RETURN

→

VOL

—

VOL

→

321

654

987

100

ENTER

VOL

—

VOL

RESET

: _ _ _ _

MENU : RETURN

RESET

: T V 1 2

MENU : RETURN

VOL

→

(ID Input screen)

Example TV 12

32C530(34-37) 1/29/03, 2:26 PM36

Dimension: 140 X 215 mm

Screen Format

•

The format of the picture can be adjusted to either of the two

screen formats.

(This function allows you to view 16:9 pictures recorded on DVD

or by camcorders that are once saved using the 4:3 aspect ratio

to be played back in the original high-density 16:9 format.)

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

3 Press VOL k/l to access the SET UP screen, then press

CH a/s to move the “E” mark to “SCREEN FORMAT”.

4 Press VOL k/l to access the SCREEN FORMAT select screen.

5 Press CH a/s to select “4:3” or “16:9”.

6 Press MENU to exit.

Note:

The 16:9 screen format will be cancelled when the power is turned off.

VOL

—

VOL

→

SLEEP T IMER

AUD I O SELECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY

SET UP

SAVE

V I DEO ADJ UST

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL

LANGUAGE

CH SET T I NG

CH / I NPUT I D

AUTO I NPUT

SCREEN FORMAT

PLUS

SET UP

(MAIN MENU screen)

(SET UP screen)

4 : 3

1 6 : 9

SCREEN FORMAT

(SCREEN FORMAT select screen)

4 : 3

1 6 : 9

SCREEN FORMAT

VOL

—

VOL

→

1 2 3

4 5 6

7 8 9

100

MENU MUTE

FLASHBACK

A B C D

ENTER

PERSONAL PREFERENCE

VOL

—

VOL

VOLUME

(+)/(–)

CHANNEL

UP (8)/

DOWN (9)

REMOTE

KEYPAD

32C530(34-37) 1/29/03, 2:26 PM37

Dimension: 140 X 215 mm

(Front connection

terminals of TV)

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO

OUTPUT

(Rear connection

terminals of TV)

To VIDEO OUTPUT

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

DVD

CAMCORDER

TV GAME

VCR

Yellow : To video input terminal

White : To audio input (L) terminal

Red : To audio input (R) terminal

Using the Video and Audio Input Terminals

VIDEO EQUIPMENT

•

Connecting video equipment for playback of video material.

• To view video material from external video equipment, make sure to connect the equipment properly

to the input terminals on the TV set.

Connecting video device equipped with video output terminals

CONNECTIONS

32C530(38-40) 1/29/03, 2:26 PM38

Dimension: 140 X 215 mm

Using the Video and Audio Input Terminals (Continued)

•

To watch video material playback

• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.

• When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PB and PR terminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is

set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest

channel.

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

• It is the intent of SHARP that this product be used in full compliance with the copyright law of the

United States and that prior permission be obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store.

AIR

CABLE

INPUT 1

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT 3 (COMPONENT)

(IN 3)

Rear

Note:

VCR

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT

(When your video equipment

has an S-VIDEO output terminal).

To AUDIO

OUTPUT (L/R)

To COMPONENT

VIDEO OUTPUT

Terminals

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

To VIDEO OUTPUT

Video Equipment with Component

video (Component Color)

Output Terminals (Y, PB and PR)

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal.

• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.

• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right).

32C530(38-40) 1/29/03, 2:26 PM39

Dimension: 140 X 215 mm

Using the Audio Output Terminals

Stereo Amplifier

Speaker System

To the audio

input terminals

•

These terminals are used for connecting an external audio amplifier. The STEREO/MONO/

SAP, VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control

or directly on the TV itself. These terminals relay the audio signal of all programs being displayed

on the TV screen.

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

CONNECTIONS

(Rear connection terminals of TV)

Plug adapter

Pin jack/Mini plug

To the equipment

being connected

Pin plug x 2 Pin Plug

To the TV

(1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level.

(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV.

(3) Turn the TV set and stereo amplifier on.

(4) If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO

SELECT screen. See pages 12, 13.

(5) Adjust the volume control on the stereo amplifier to a moderate listening level.

(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

• For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

• When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal

sound quality. (see page 12.)

32C530(38-40) 1/29/03, 2:26 PM40

Dimension: 140 X 215 mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VCR

DVD/VCR POWER

Press to turn the VCR or DVD

on and off.

PLAY

Press to playback a tape or disc.

REWIND

Press to rewind a tape or

reverse a disc. For some VCRs

or DVDs you may need to press

STOP first, then REWIND.

PAUSE

Press to temporarily stop the

tape or disc during playback

or recording (VCR only).

Press again to release PAUSE.

STOP

Press to stop the tape or disc.

REMOTE KEYPAD

Use to enter two-digit code

numbers when identifying your

VCR, DVD and CATV converter.

ENTER

Press to rapidly advance the

tape or disc. For some VCRs or

DVDs, you may need to press

STOP first, then FF.

VCR CHANNEL

UP ( )/ DOWN ( )

Press to scan up or down through

channels on the VCR.

RECORD

Press to begin recording.

(VCR only)

DVD SKIP

Press to jump forward to the

beginning of the next chapter/track,

or backward to the beginning of the

current chapter/track, and

automatically start to play that

chapter/track.

Operation of Universal Remote Control

•

Universal Remote Control

With the purchase of your television set you

also have received the latest innovation in

remote control technology. With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

Note:

• Depending on the model year produced, brand

and type of VCR, cable TV converter and DVD,

some models may not be compatible with the

remote control.

• Some brands may not enable channel

selection until the ENTER is pressed. In such

case, try the following.

Example:

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

For detailed information on the use of the

Cable TV converter Box refer to their operating

manuals.

•

Using your Remote with your TV

After installing the batteries, set the CATV/

DVD-TV/VCR on the Remote to the TV

position. (If you can change the channel of the

TV by pressing CH a/s on the Remote

Control, it is in the TV position.)

•

“Identifying” VCRs, cable TV converters

and DVDs

Your Remote Control has been set at the

factory to operate your TV and many remote

controlled VCRs, cable TV converters and

DVDs. However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs.

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends proper

signals to operate your accessory.

• This identifying step will not have to be

repeated until power to the Remote is

interrupted due to a battery failure.

•

Using your remote control with a VCR

Once you make certain the Remote Control

has “identified” your remote controlled VCR or

DVD, the Remote is ready to operate your unit.

The various VCR or DVD function buttons on

the Remote will not operate your VCR or DVD

if those features are not already found on your

unit.

• All VCR buttons will operate whether the

Remote is in TV or VCR modes.

• For detailed information on the use of the VCR

or DVD, refer to the operation manual of the

VCR or DVD.

32C530(41-45) 1/29/03, 2:26 PM41

Dimension: 140 X 215 mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VCR

Operation of Universal Remote Control (Continued)

•

How to identify a VCR

The remote control may already be set to

operate your VCR. Try this initial check before

going on to the following “identifying” section.

(1) Slide CATV/DVD-TV/VCR switch to VCR.

(2) Point the Remote towards VCR and press

POWER (DVD/VCR).

(3) Does the Remote turn the VCR ON and OFF?

• If yes, the Remote is ready to operate the VCR

and no further steps are needed.

• If no, continue to the “identifying” section.

Direct Entry Method

Refer to the following steps and list to quickly

find the remote control code for your accessory

VCR.

• First look up your VCR’s remote control code

number before going through the Direct Entry

Method.

• If this procedure does not identify your

accessory VCR, use the Search Method of

identification (described in the next section).

(1) Slide CATV/DVD-TV/VCR switch to VCR.

(2) Press and hold down DISPLAY

and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s , enter your VCR’s two-digit remote

control code number using the REMOTE

KEYPAD

(refer to the list on page 44).

• The remote control is now ready to send

commands to your VCR.

Some brands have more than one remote code

listed, due to changes in the remote codes

from early to later model years, or due to format

differences (VHS/BETA). In such cases, you

may have to try more than one code to find

the code your VCR accepts.

Note:

Depending on the model, year produced,

brand, and type of VCR, some models may

not be compatible with the remote control.

Search Method

(1) Slide CATV/DVD-TV/VCR switch to VCR.

(2) Press POWER of the VCR to ON.

(3) Stand at least 6 feet away from the front of the

VCR.

Point the Remote towards the VCR.

Hold down DISPLAY

and CH a at the same

time. KEEP HOLDING THE BUTTONS

DOWN.

(4) Watch the channel number indicator on the

VCR, channel numbers will scan up when the

VCR has been identified.

Release DISPLAY

and CH a as soon as the

channel numbers start to scan up.

The VCR’s remote control code number has

been identified, and the Remote is ready to

operate the VCR.

DVD/VCR

POWER

DISPLAY

CHANNEL

UP (a)/

DOWN (s)

CATV/DVD-TV/VCR

REMOTE

KEYPAD

POWER

32C530(41-45) 1/29/03, 2:26 PM42

Dimension: 140 X 215 mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VCR

Operation of Universal Remote Control (Continued)

Tips on identifying your VCR

If your VCR model does not have the “channel up”

function on its remote control, it cannot be identified

using the Search Method for identifying. For such

models, please try the Direct Entry Method of

identifying.

Be Patient: A minute or two can seem a lot longer

when you’re waiting for something to happen, but

the code should be identified within 2 minutes.

Remember, it is only a one-time set-up.

Be careful not to let the VCR scan more than 5

channels when the indicator starts to move up. If

you continue holding down the DISPLAY

and CH

a after 5 channel scans, the proper remote code

can be passed up, and the 2 minutes identifying

cycle will have to be repeated.

If a channel change does not occur on the VCR

within 2 minutes, read the identifying instructions

again and repeat the steps. Should a channel

change still not occur, the Remote will not operate

with the desired VCR.

Akai

Audio Dynamics

Broksonic

Canon

Capehart

Craig

Curtis Mathis

Daewoo

DBX

Dynatech

Emerson

Fisher

Funai

Goldstar

Hitachi

Instant Replay

JC Penney

JVC

Kenwood

Lloyds

Magnavox

Magnin

Marantz

Memorex

Minolta

Mitsubishi

Montgomery Ward

Multitech

NEC

Panasonic

Pentax

Philco

Philips

Quasar

RCA

Realistic

Samsung

Sanyo

Scott

Sears

Sharp

Shintom

Sony

Sound Design

Sylvania

Symphonic

Tatung

Teac

Teknika

Thomas

TMK

Toshiba

Video Concepts

Yamaha

Zenith

25, 26, 37

15, 22, 30

10, 31

15, 22, 30

21, 32, 35

09, 10, 11

28, 29

04, 06, 24, 30

15, 41, 42

14, 15

04, 05, 08

04, 10, 24, 29

17, 18, 39, 40

02, 43

15, 22, 30

04, 44

05, 06

04, 05

04, 05, 08

06, 07, 33

01, 02, 10, 24

23, 31

14, 10

06, 11, 24

01, 02, 03

12, 13, 38

04, 05, 08

15, 29

27, 29

19, 20

15, 29, 30

VCR BRAND

REMOTE CONTROL

CODE NUMBER

DISPLAY

REMOTE

KEYPAD

CHANNEL

UP (a)/

DOWN (s)

CATV/DVD-

TV/VCR

POWER

32C530(41-45) 1/29/03, 2:26 PM43

Dimension: 140 X 215 mm

Operation of Universal Remote Control (Continued)

DVD/VCR

POWER

CHANNEL

UP (a)/

DOWN (s)

CATV/DVD-

TV/VCR

REMOTE

KEYPAD

Denon

JVC

Magnavox

Marantz

Mitsubishi

Panasonic

Philips

Pioneer

Proscan

RCA

Samsung

Sharp

Sony

Toshiba

Yamaha

Zenith

01, 10

DVD BRAND

REMOTE CONTROL

CODE NUMBER

•

How to identify a DVD

The remote control may already be set to

operate your DVD. Try this initial check before

going on to the following “identifying” section.

(1) Slide CATV/DVD-TV/VCR switch to DVD.

(2) Point Remote towards DVD and press DVD/

VCR POWER.

(3) Does the Remote turn the DVD ON and OFF?

• If yes, the Remote is ready to operate the DVD

and no further steps are needed.

• If no, continue to the “identifying” section.

Direct Entry Method.

Refer to the following steps and list to quickly

find the remote control code for your accessory

DVD.

• First look up your DVD’s remote control code

number before going through the Direct Entry

Method.

(1) Slide CATV/DVD-TV/VCR switch to DVD.

(2) Press and hold down INPUT and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing INPUT

and

CH s, enter your DVDs two-digit remote

control code number using REMOTE KEYPAD

(refer to the list).

• The remote control is now ready to send

commands to your DVD.

Note:

Depending on the model, year produced,

brand, and type of DVD, some models may

not be compatible with the remote control.

POWER

DISPLAY

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VCR

INPUT

32C530(41-45) 1/29/03, 2:26 PM44

Dimension: 140 X 215 mm

Operation of Universal Remote Control (Continued)

•

How to identify a cable converter

Direct Entry Method

Refer to the following steps and list to quickly

find the remote control code for your cable TV

converter.

• First look up your converter’s remote code

number before going through the Direct Entry

Method below.

• If this procedure does not identify your

converter, use the Search Method for

identification.

(1) Slide CATV /DVD-TV/VCR switch to CATV.

(2) Press and hold down DISPLAY

and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s, enter your converter’s two-digit

code number using REMOTE KEYPAD (refer

to the list).

• The remote control is now ready to send

commands to your converter.

• Some brands have more than one remote code

listed due to changes in the remote codes from

early to later model years. In such cases, you

may have to try more than one code to find

the code your converter accepts.

Note:

Depending on the model, year produced,

brand, and type of CATV converter, some

models may not be compatible with the remote

control.

Search Method

(1) Slide CATV /DVD-TV/VCR switch to CATV.

(2) Press the power button on the cable converter

to ON.

(3) Stand at least 6 feet away from the converter.

Point the Remote towards the converter.

Hold down the DISPLAY

and CH a at the

same time. KEEP HOLDING THE BUTTONS

DOWN.

(4) Watch the Channel Number indicator on the

converter.

Channel numbers will scan up when the

converter has been identified.

Release the DISPLAY

and CH a as soon as

the channel numbers start to scan up.

The converter’s remote control code number

has been identified, and the remote is ready

to operate the converter.

Tips on identifying your cable converter

Be Patient: A minute or two can seem a lot

longer when you’re waiting for something to

happen, but the code should be identified

within 2 minutes. Remember, it is only a one-

time set-up.

Be careful not to let the CATV converter scan

more than 5 channels when the indicator starts

to move up. If you continue holding down the

DISPLAY

and CH a after 5 channel scans,

the proper remote code can be passed up, and

the 2 minute identifying cycle will have to be

repeated.

If a channel change does not occur on the

cable converter within 2 minutes, read the

identifying instructions again and repeat the

steps. Should a channel change still not occur,

the remote will not operate with the desired

converter.

Note:

Some satellite receivers can be operated by

the REMOTE CONTROL. If you have a

Satellite Receiver, you can use the above

method to search for available channels.

Anvision

Cable Star

Eagle

General Instrument

Jerrold

Magnavox

Oak Sigma

Panasonic

Philips

Pioneer

Randtek

RCA

Scientific Atlanta

Sony

Viewstar

Zenith

07, 08

04, 05, 15, 23, 24, 25,

30, 36

04, 05, 15, 23, 24, 25

30, 36

07, 08, 19, 25, 28, 29,

32, 33, 40, 41

27, 39

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

18, 20

07, 08

27, 43

03, 22, 42

07, 08, 19, 26, 28, 29

32, 33, 40, 41

CATV CONVERTER

BRAND

REMOTE CONTROL

CODE NUMBER

32C530(41-45) 1/29/03, 2:26 PM45

Dimension: 140mm x 215mm

Before Calling for Service

Check these items and see if you can correct the trouble with a slight adjustment of the controls.

QUICK SERVICE

CHECK LIST

POSSIBLE REMEDY

Try a new channel, if OK, then there

is a possible station trouble.

Is TV plugged in? Power at outlet?

Is TV’s POWER button on?

Is antenna connected to terminal on

the back of the set?

If outside antenna is being used,

check for broken wire.

Check for local interference or

external electrical noise.

Turn off the POWER and then turn it

on after about a minute.

Adjust COLOR control.

Adjust PICTURE control.

Check external Video/Audio products:

look for loose/broken connection

leads. (Refer to pages 38–40)

Check batteries of Remote Control.

Slide CATV/DVD-TV/VCR Select

Switch to TV position.

Are audio cables connected firmly?

Check the volume level.

Is SPEAKER ON? See pages 12, 13.

Change Closed Caption mode to

“OFF”/Energy Save mode to “OFF”.

Unplug the TV and plug it in again

after 2 minutes or longer.

XXXXXXX X XXXXXXXXX X

X XXXXXX X XXXXXXX XX X

X X XXXXX X XXXXXXX XX X

XXXXXXXX XX X X X X X XX X

XXXXXXX X XXXXXX X XX X

XXXX X X X X X XXX XXXX X X

X X XXXXX X XXXXXXX XX X

XXXXXXX X XXXXXXXX X X

XXXXXXXXX XXXX XXX X X

XXXXXXX X XXXXXXXXX X

XXX XXXX X XXXXXXXX X X

X X XXXXX X XXXXXXX XX

X X XXXXX X XXXXXXX XX X

X X XXXXX X XXXXXXXX XX

XXX XXXX X X XXXXXXX X X

PROBLEM

No Playback of VCR and Disc

Player

No Picture or Sound from

External Video/Audio Products

Remote Control Doesn’t Work

Bars on Screen

Picture Distorted

Picture Rolls Vertically

No Color

Poor Reception on Some

Channels

Weak Picture

Lines or Streaks in Picture

Ghosts in Picture

Picture Blurred

Sound OK, Picture Poor

Picture OK, Sound Poor

No Picture or Sound

Dark and Blank Picture

External Electrical Noise

Interfering with TV’s Operation

Color on Part of the Screen

Appears Distored

(Dark and Blank Picture)

Note:

• If no TEXT broadcast is being received while viewing in the TEXT

mode, the screen may become dark and blank for some programs.

Should this occur, switch the Closed Caption mode to “OFF”.

For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,

or customer assistance, please call 1-800-BE-SHARP.

Calling for Service

32C530(46-47) 1/29/03, 2:44 PM46

Dimension: 140mm x 215mm

MODEL 32C530

Receiving System NTSC

Stereo Broadcast MTS/SAP

Reception Channels

AIR VHF 2-13 ch

UHF 14-69 ch

CATV 1-125 ch

Channel Tuning 181-channel Reception PLL tuning system

Antenna Input Impedance VHF/UHF 75 ohm Unbalanced

Screen Size 32˝ Diagonally Measured

Terminals Audio/Video input x 3 (Front x 1, Rear x 2)

S-Video input x 1 (Rear)

COMPONENT x 1 (Rear)

Audio output x 1 (Rear)

Sound Output 5.0 W (RMS) x 2

Power Source AC 120 V, 60 Hz

Power Consumption 135 W

Dimensions 33

/64˝ (W) x 26

/64˝ (H) x 21

/8˝ (D)

[(W) x (H) x (D)] mm [860 mm (W) x 675 mm (H) x 543 mm (D)]

Weight (approx.) 70.5 Ibs. (32 kg)

Specifications

• Design and specifications are subject to change without notice.

32C530(46-47) 2/6/03, 11:28 AM47

Dimension: 140mm x 215mm

Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.

IMPORTANTE

Sírvase anotar el modelo del televisor y los números de serie

en el espacio provisto, para ayudar a reportar en caso de

pérdida o robo. Los números están ubicados en la parte

posterior del televisor.

N° de modelo :

N° de serie :

(ESPAÑOL)

INFORMACIÓN IMPORTANTE

Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor

SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.

PRIMERA – GARANTÍA

Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio

técnico y mano de obra aplicable a su adquisición.

SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR

Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,

modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de

consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA” DE LA ÚLTIMA PÁGINA.

¿QUÉ ES ENERGY STAR

Los televisores y las videograbadoras utilizan energía cuando están encendidos ó apagados. Los norteamericanos

gastan más de 1 billón de dólares al año en la energía que consumen televisores y videograbadoras cuando no

se encuentran en uso. Los nuevos modelos ENERGY STAR

reducen esa “fuga” de energía hasta en un 75

por ciento. Esto implica más de 500 millones de dólares al año en ahorro de energía para los consumidores.

El ahorro de energía ayuda a reducir el consumo de combustibles fósiles y por tanto la contaminación por

dióxido de carbono que contribuye al calentamiento global. Si cada familia norteamericana sustituyera sus

televisores y videograbadoras por modelos ENERGY STAR

, se reducirían las emisiones de dióxido de carbono

en cinco millones de toneladas cada año (equivalente a eliminar la contaminación procedente de más de un

millón de automóviles).

El uso de productos ENERGY STAR

permite reducir el monto de las facturas de energía eléctrica y consumir

menos energía. De este modo ahorrará dinero y ayudará a proteger el medio ambiente.

ADVERTENCIA :

PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA

ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.

PRECAUCIÓN : PARA REDUCIR EL RIESGO DE

DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA

(NI EL PANEL POSTERIOR).

NO CONTIENE PIEZAS REPARABLES POR EL USUARIO.

SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE

SERVICIO TÉCNICO ESPECIALIZADO.

El relámpago con cabeza de

flecha dentro de un triángulo trata

de indicar al usuario que las partes

dentro del producto representan

riesgo de electrochoque para las

personas.

El signo de exclamación dentro de

un triángulo trata de indicar al

usuario que las instrucciones

importantes de operación y

servicio se encuentran en los

documentos con el aparato.

“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del

instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las

directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar

conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”

32C530(48-50) 1/29/03, 2:45 PM48

Dimension: 140mm x 215mm

ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que

se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad

del usuario para utilizar este equipo.

DESECHO DEL PRODUCTO

Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.

El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener

información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con

Electronics Industries Alliance: www.eiae.org

INFORMACIÓN IMPORTANTE (Continuación)

PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.

MEDIDAS DE SEGURIDAD IMPORTANTES

PRECAUCIÓN : Lea por favor todas estas instrucciones antes de poner en funcionamiento

su televisor, y guárdelas para poder utilizarlas en el futuro.

La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para

garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE

DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar

problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.

1. Desenchufe el televisor del tomacorriente antes de limpiarlo.

2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.

3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.

4. No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en

un sótano húmedo, cerca de una piscina, etc.

5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse

causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor

solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con

el televisor.

6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas

rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la

combinación de televisor y carrito se volteen.

7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del

fabricante, y utilice el kit de montaje aprobado por el fabricante.

8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para

que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor

no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación

apropiada.

9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no

deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.

Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.

10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no

está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien

adquirió el televisor o con la compañía eléctrica local.

En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de

uso.

11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.

El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.

Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.

No modifique el enchufe porque anulará esta característica de seguridad.

12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable

pueda ser deformado por personas que caminen sobre él.

32C530(48-50) 1/29/03, 2:45 PM49

Dimension: 140mm x 215mm

MEDIDAS DE SEGURIDAD IMPORTANTES

(Continuación)

13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.

14. Si hay una antena exterior conectada al televisor, asegúrese de que el sistema de antena está conectado

a tierra, para obtener así cierta protección contra la sobretensión y contra las cargas de electricidad

estática acumulada.

EJEMPLO DE CONEXIÓN A TIERRA DE UNA

ANTENA SEGÚN EL CÓDIGO ELÉCTRICO NACIONAL.

NEC- NATIONAL ELECTRICAL CODE (CÓDIGO ELÉCTRICO NACIONAL)

15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin

utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y

desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la

sobretensión en la línea de alimentación.

16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de

luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas

o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado

para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.

17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o

descarga eléctrica.

18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o

causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca

ningún tipo de líquido sobre el televisor.

19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una

descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.

20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se

produzcan las condiciones siguientes:

A. Cuando el cable de la alimentación o el enchufe estén estropeados.

B. Cuando haya derramado un líquido sobre el televisor.

C. Si el televisor ha quedado expuesto a la lluvia o al agua.

D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente

los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles

podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que

éste lo repare y lo devuelva a su condición normal.

E. Si el televisor se ha caído o la caja se ha estropeado.

F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio

de reparaciones.

21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice

comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún

problema.

22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de

CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas

originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u

otros peligros.

BAJADA DE ANTENA

ABRAZADERA PARA PUESTA A TIERRA

UNIDAD DE DESCARGA DE ANTENA

(SECCIÓN 810-20 DEL NEC)

CONDUCTORES DE PUESTA A TIERRA

(SECCIÓN 810-21 DEL NEC)

ABRAZADERAS PARA PUESTA A TIERRA

SISTEMA DE ELECTRODOS DE PUESTA A TIERRA DEL SERVICIO

ELÉCTRICO (PARTE 250. PARTE H DEL NEC)

EQUIPO DE

SERVICIO

ELÉCTRICO

32C530(48-50) 1/29/03, 2:45 PM50

Dimension: 140mm x 215mm

L Ubicación de los controles (ESPAÑOL)

Panel Delantero

Referencia rápida de los controles de operación

AUMENTO/DISMINUCION

DEL VOLUMEN (VOL)

(+) Aumenta el sonido.

(–) Disminuye el sonido.

CANAL SUPERIOR/INFERIOR

(CH) – MENU

(8) Selecciona el siguiente canal

superior.

(9) Selecciona el siguiente canal

inferior.

ALIMENTACION (POWER)

Pulsando → Enciende (On).

Pulsando nuevamente →

Apaga (Off).

Funciones Basicas Del Control Remoto

Nota:

• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor

del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.

• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún

peligro.

• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.

• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.

• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.

• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.

Ventanilla del transmisor de infrarrojos

VISUALIZACION (DISPLAY)

Pulsando → Aparece el canal de recepción

por cuatro segundos.

Pulsando nuevamente → Elimina la

visualización.

• En el modo de “Closed Caption” se

muestra el canal de recepción por un

corto tiempo.

ENTRADA (INPUT)

Pulsando → Cambia al modo de entrada

1 del vídeo externo.

Pulsando 2 veces → Cambia al modo de

entrada 2 del vídeo externo.

Pulsando 3 veces → Cambia al modo de

entrada 3 del vídeo externo o al modo

COMPONENT.

Pulsando 4 veces → Vuelve al modo TV

original. Consulte la página 39.

INTRODUCIR (ENTER)

Se utiliza en algunos casos en los cuales

una Caja de Inversor de Cable requiere una

orden “enter” después de seleccionar los

canales, al usar el teclado a distancia.

(Consulte la página 41)

CANAL SUPERIOR/INFERIOR

(CHANNEL UP/DOWN)

(8) Selecciona el siguiente canal superior.

(9) Selecciona el siguiente canal inferior.

• Consulte las páginas 28 ~ 30 para

obtener información sobre el preajuste

de canales.

• En el modo de MENU, mueve la marca

“

[ ”.

SILENCIAMIENTO (MUTE)

Pulsando → Silencia el sonido.

Pulsando nuevamente → Restaura el

sonido.

• CLOSED CAPTION aparece automáti-

camente cuando el sonido es silenciado.

Siempre y cuando la transmisión tenga

esta señal.

CONTROLES DEL DVD/VIDEO

Consulte la página 41.

ALIMENTACION (POWER)

Pulsando → Enciende (On).

Pulsando nuevamente → Apaga (Off).

TECLADO A DISTANCIA

(REMOTE KEYPAD)

Para tener acceso a cualquier

canal empleando las teclas.

RETORNO AL CANAL

ANTERIOR (FLASHBACK)

Para volver al canal anterior.

PREFERENCIAS PERSONALES

Con los botones Personal Preference puede

programar sus programas favoritos

utilizando las cuatro categorías A, B, C y D.

Puede acceder a los canales rápidamente

utilizando estos botones. (Consulte la

página 32)

AUMENTO/DISMINUCION DEL

VOLUMEN (VOLUME UP/DOWN)

(+) Aumenta el sonido.

(–) Disminuye el sonido.

• En modo de MENU cambia o

selecciona el ajuste del televisor.

PREPARACION (MENU)

Pulsando → Accede al MENU

PRINCIPAL.

Pulsando nuevamente → Sale del

MENU PRINCIPAL.

CONMUTADOR SELECTOR DE

TELEVISOR/TV POR CABLE (TV-CATV)

En la posición TV, el mando envia los

comandos de alimentación y selección de

canales (botones de canal superior/inferior

y de acceso aleatorio) a un televisor.

En la posición CATV, envia los comandos

de alimentación y selección de canales

a un convertidor de TV por cable.

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

POR DENTRO DE LA PUERTA

MENU (MENU)

Pulsando → Accede al MENU

PRINCIPAL.

Pulsando nuevamente → Sale

del MENU PRINCIPAL.

ZONA DEL SENSOR DEL

MANDO A DISTANCIA

ENTRADA VIDEO IN 2 I-AUDIO-D

32C530(51-52) 2/19/03, 9:07 AM51

Dimension: 140mm x 215mm

Antes de llamar al servicio de reparaciones

Verifique estos puntos para ver si usted mismo puede solucionar el problema.

(Imagen oscura y en blanco)

Nota:

• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la

pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el

modo CLOSED CAPTION en OFF.

Solicitud de servicio técnico

Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de

información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.

XXXXXXXXXXXXXXXXX X

X XXXXXXXXXXXXXX XX X

X X XXXXXXXXXXXXX XX X

XXXXXXXXXX X X X X X XX X

XXXXXXXXXXXXXX X XX X

XXXX X X X X X XX X XXXX X X

X X XXXXXXXXXXXXX XX X

XXXXXXX XXXXXXXXX X X

X X XXXXXXX XX XX XXX X X

XXXXXXXXXXXXXXXXX X

XXX XXXXXXXXXXXXX X X

X X XXXXXXXXXXXXX XX

X X XXXXXXXXXXXXX XX X

X X XXXXXXXXXXXXXX XX

XXX XXXX X X XX XXXXX X X

POSIBLE SOLUCIÓN

Pruebe con otro canal y si todo está

bien, el problema puede ser de la

emisora.

Está conectado el televisor?

Llega electricidad al tomacorrientes?

Está conectado el interruptor del

televisor?

Está conectado la antena al terminal del

panel posterior del televisor?

Si utiliza una antena exterior, cerciórese

de que el cable no esté dañado.

Compruebe si hay interferencia local.

Desconecte el interruptor POWER y

vuelva a conectarlo después de

transcurrir un minuto.

Ajuste el control de COLOR.

Ajuste el control de MATIZ.

Verifique los productos externos de

Video/Audio, revise si hay fugas de

conexiones sueltas o rotas.

Compruebe el estado de las pilas del

mando a distancia.

Deslice CATV/DVD-TV/VCR selector

para situarlo sobre la posición TV.

Están bien conectados los cables de

sonido? Compruebe el nivel del volumen.

Está conectado el altavoz?

Desactive (OFF) el modo CLOSED

CAPTION / Desactive (OFF) el modo

Ahorro de Energía (Energy Save).

Desenchufe el televisor y vuelva a

enchufarlo despúes de dos minutos o más.

LISTA DE

COMPROBACIONES

DE SERVICIO

RAPIDO

PROBLEMA

El vídeo o el reproductor de discos de

video no reproducen im

ágenes

El equipo de video/audio externo no

produce imágenes ni sonido

El mando a distancia no funciona

Barras en la pantalla

Imagen distorsionada

La imagen se desplaza verticalmente

No hay color

Mala recepción de algunos canales

Imagen débil

Franjas en la imagen

Imagen fantasma

Imagen borrosa

Sonido adecuado, imagen mala

Imagen adecuada, sonido malo

No hay imagen ni sonido

Imagen oscura y en blanco

Interferencia de ruido el

éctrico externo

con el funcionamento del televisor

El color se ve distorsionado en parte de

la pantalla

32C530(51-52) 1/29/03, 2:45 PM52

Dimension: 140mm x 215mm

Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.

IMPORTANT

Afin de vous aider en cas de perte ou de vol, inscrivez les

numéros de série et de modèle du téléviseur dans les

espaces fournis à cet effet. Ces numéros sont situés à

l’arrière du téléviseur.

N° du modèle :

N° de série :

(FRANÇAIS)

INFORMATIONS IMPORTANTES

Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à

l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :

LA PREMIERE – LA GARANTIE

Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du

service et des travaux applicable à votre achat.

LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER

PRODUCT SAFETY ACT)

Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre

produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.

LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.

ENERGY STAR

: QU’EST-CE QUEC’EST

Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsqu’ils sont allumés et éteints. Les Américains dépensent

plus d’1 milliard de dollars par an en énergie consommée par les téléviseurs et les magnétoscopes une fois éteints. Les

nouveaux modèles ENERGY STAR

réduisent jusqu’à 75 % ce gaspillage d’énergie. Ce qui représente finalement

plus de 500 millions de dollars par an d’économie d’énergie pour les consommateurs.

Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique associée, qui

contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient leurs téléviseurs et leurs

magnétoscopes par des modèles ENERGY STAR

, les émissions de gaz carbonique seraient réduites de cinq millions

de tonnes par an — ce qui reviendrait à éliminer la pollution émise par plus d’un million de voitures.

En utilisant les produits ENERGY STAR

, vous économiserez également de l’argent sur vos factures d’électricité et

vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre environnement !

AVERTISSEMENT:

POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,

N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.

ATTENTION : POUR REDUIRE LE RISQUE

D’ELECTROCUTION,

NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).

L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR

PAR L’UTILISATEUR.

CONSULTEZ UN PERSONNEL QUALIFIE POUR

LA MAINTENANCE.

Le symbole de la foudre sous

forme de flèche dans un triangle

est supposé indiquer à

l’utilisateur que les pièces

internes au produit constituent

un risque d’électrocution.

Le symbole du point d’exclamation

dans un triangle est supposé

indiquer à l’utilisateur que des

instructions de fonctionnement et

de maintenance importantes se

trouvent dans la documentation

fournie avec l’équipement.

“Note à l’intention de l’installateur du système CATV : Ce rappel est fourni afin d’attirer l’attention de l’installateur

de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre

appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à

la terre du bâtiment, au point le plus proche possible de la source.”

32C530(53-55) 1/29/03, 2:45 PM53

Dimension: 140mm x 215mm

INFORMATIONS IMPORTANTES (Suite)

AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non

autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir

de l’utilisateur sur le fonctionnement de cet équipement.

MISE AU REBUT DU PRODUIT

Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.

La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute

information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes

préconisées par la société Electronics Industries Alliance sur : www.eiae.org.

ATTENTION: Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.

PRÉCAUTIONS IMPORTANTES

ATTENTION : Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-

les pour un usage ultérieur.

L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon

à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES

RISQUES D’ELECTROCUTION OU D’INCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil,

respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.

1. Débranchez la télévision avant de la nettoyer.

2. N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.

3. N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.

4. N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un

évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.

5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber

et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez

uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la

télévision.

6. L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une

force excessive et des surfaces inégales peuvent renverser l’ensemble.

7. L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions

du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.

8. Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.

Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures

ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré

tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.

9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure

ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface

similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni

dessus.

10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.

Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision

ou la compagnie d’électricité locale (EDF en France).

Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.

11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus

importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul

sens.

Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être

obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.

12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le

cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.

32C530(53-55) 1/29/03, 2:45 PM54

Dimension: 140mm x 215mm

PRÉCAUTIONS IMPORTANTES (Suite)

13. Respectez tous les avertissements et instructions mentionnés sur la télévision.

14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à

la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques

accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la

terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de

décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge

d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.

15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée

pendant de longues périodes, débranchez-la et déconnectez l’antenne. Vous éviterez ainsi des dommages

à votre équipement suite à la foudre et des poussées de tension.

16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres

groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur

ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement

attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.

17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou

d’électrocution.

18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des

points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une

électrocution. Ne répandez jamais de liquides sur la télévision.

19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous

exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance

à un personnel qualifié.

20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les

opérations de maintenance à un personnel qualifié :

A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;

B. si du liquide a été répandu sur/dans la télévision ;

C. si la télévision a été exposée à la pluie ou à l’eau ;

D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez

uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres

commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,

une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne

normalement ;

E. si la télévision a été renversée ou que le châssis est endommagé ;

F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de

maintenance.

21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles

de sécurité classiques afin de déterminer si la télévision est en bon état de marche.

22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces

de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine.

Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.

DESCENTE

D’ANTENNE

UNITÉ DE DÉCHARGE

D’ANTENNE

(NEC SECTION 810-20)

CONDUCTEURS DE TERRE

(NEC SECTION 810-21)

COLLIERS DE MISE À LA TERRE

ÉLECTRODE DE TERRE DE

LA COMPAGNIE D’ÉLECTRICITÉ

(NEC ART. 250, PARTIE H)

BOÎTIER DE

LA COMPAGNIE

D’ÉLECTRICITÉ

NEC – CODE NATIONAL DE L’ÉLECTRICITÉ

COLLIER DE MISE

À LA TERRE

EXEMPLE DE MISE

LA TERRE D’UNE ANTENNE

SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ

32C530(53-55) 1/29/03, 2:45 PM55

Dimension: 140mm x 215mm

L Emplacement des touches (FRANÇAIS)

Panneau Avant

Référence rapide sur les commandes

TOUCHES DES CANAUX

CROISSANT/DÉCROISSANT

(CH) – MENU

(8) Sélectionne le canal supérieur

suivant.

(9) Sélectionne le canal inférieur

précédent.

AUGMENTATION/RÉDUCTION

DU VOLUME SONORE (VOL)

(+) Pour augmenter le volume du son.

(–) Pour diminuer le volume du son.

ENTREE VIDEO G-AUDIO-D

(DERRIERE LE VOLET)

IN 2

1 2 3

4 5 6

7 8 9

100

POWER

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

DVD

VCR

CATV TV

DVD VCR

Fonctions de base de la télécommande

Fenêtre d’émission du signal infrarouge

AFFICHAGE (DISPLAY)

Appuyer pour afficher le canal reçu

pendant quatre secondes.

Appuyer de nouveau pour faire disparaître

le canal.

• Pour afficher temporairement le canal

reçu en mode Sous-titres.

ENTRÉE (INPUT)

Appuyer → Pour sélectionner le mode

ENTRÉE 1 vidéo externe.

Appuyer 2 fois → Pour sélectionner le

mode ENTRÉE 2 vidéo externe.

Appuyer 3 fois → Pour sélectionner le

mode ENTRÉE 2 vidéo externe ou le

mode COMPOSANT.

Appuyer 4 fois → Pour revenir au mode

TV initial. Voir page 39.

ENTRER (ENTER)

Parfois utilisée lorsqu’un convertisseur

nécessite l’introduction d’une commande

“enter” après la sélection de canaux à

l’aide du pavé numérique de commande

à distance. (Voir page 41)

TOUCHES DES CANAUX CROISSANT/

DÉCROISSANT (CHANNEL UP/DOWN)

(8) Sélectionne le canal supérieur suivant.

(9) Sélectionne le canal inférieur précedént.

• Voir pages 28 ~ 30 pour prérégler les

canaux.

• Déplace le curseur “

[ ” sur l’écran du

MENU.

SOURDINE (MUTE)

Appuyer → Mise en sourdine du son.

Appuyer de nouveau → Rétablissement

du son.

• CLOSED CAPTION apparaît lorsque le

son est mis en sourdine.

COMMANDE DU LECTEUR DE DVD/

MAGNÉTOSCOPE

Voir page 41.

Remarque:

• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a

été placée sous une ampoule fluorescente ou toute autre source lumineuse.

• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.

• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.

• Le degré d’illumination diminuera avec le temps, en fonction de la température.

• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.

• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des

touches phosphorescentes.

ALIMENTATION (POWER)

Appuyer pour mettre sous tension.

Appuyer de nouveau pour mettre hors

tension.

PAVE NUMERIQUE DE COMMANDE A

DISTANCE (REMOTE KEYPAD)

Sélectionne directement le canal voulu

sur le pavé numérique.

RETOUR (FLASHBACK)

Rappelle le canal regardé précédent.

PREFERENCES PERSONNELLES

Grâce aux touches de préférence

personnelle, vous pouvez programmer

vos programmes préférés à l’aide des 4

catégories:

A, B, C et D. Ces touches vous permettent

d’accéder rapidement à ces canaux.

(Voir page 32)

AUGMENTATION/RÉDUCTION DU

VOLUME SONORE (VOLUME UP/DOWN)

(+) Pour augmenter le volume du son.

(–) Pour diminuer le volume du son.

• Pour changer ou sélectionner les

réglages du téléviseur en mode menu.

RÉGLAGE (MENU)

Appuyer → Accès au MENU PRINCIPAL.

Appuyer de nouveau → Sortie du MENU

PRINCIPAL.

SÉLECTEUR DE MODE DE

CÂBLOVISION/DVD-TÉLÉVISION/

MAGNÉTOSCOPE (CATV/DVD-TV/VCR)

En position télévision/magnétoscope

(TV/VCR), permet de mettre le téléviseur et

le magnétoscope sous/hors tension et de

sélectionner ses canaux (touche de canaux en

ordre croissant/décroissant et d’accès direct).

En position câblovision/DVD (CATV/DVD),

permet de mettre un convertisseur de téléviseur

par câble et un lecteur de DVD sous/hors

tension et de sélectionner ses canaux.

ALIMENTATION (POWER)

Appuyer → Pour mettre sous tension.

Appuyer de nouveau → Pour mettre

hors tension.

RÈGLAGE (MENU)

Appuyer

→ Pour mettre sous tension.

Appuyer de nouveau

→ Pour mettre

hors tension.

DERRIERE LE VOLET

ZONE DE DETECTION

DU CAPTEUR

32C530(56-57) 2/19/03, 9:01 AM56

Dimension: 140mm x 215mm

Avand d’appeler un réparateur

Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.

(Image sombre et vide)

Remarque:

• En mode TEXTE, s’il n’y a pas d’émission TEXTE àrecovoir, l’écran

du téléviseur pourrait être sombre et vide. Dans ce cas, placer la

mode Sous-titrage hors service.

Pour connaître l’emplacement du centre de service après-vente agréé Sharp le plus proche ou pour

obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au

consommateur, appelez le 1-800-BE-SHARP.

Appel au service après-vente

LISTE DES

VÉRIFICATIONS

POUR UN

DÉPANNAGE

RAPIDE

SOLUTION POSSIBLE

Essayer un nouveau canal. S’il fonctionne, il s’agil

ptobablement d’une panne de la chaîne.

Le téléveseur est-il branché?

La prise secteur fonctionne-t-elle?

L’interrupteur POWER du téléviseur est-il sous

tension?

L’antenne est-elle raccordée aux bomes à l’arrière

de l’appareil?

Si l’antenne extérieure est utilisée, s’assurer qu’il

n’y a pas de fils sectionnés.

Vérifier s’il n’y a pas d’interférence locate ou de bruit

électrique extérieur.

Mettre l’interrupteur POWER hors tension puis de

nouveau sous tension au bout d’une minute.

Régler la commande de COULEUR.

Régler la commande de CONTRASTE.

Vérifier l’appareil vidéo/audio exterme : s’asseurer

que les câbles de connexion ne sont pas desserrés

ou cassés.

Vérifier les piles de la télécommande.

Faites glisser le sélecteur de mode CATV/DVD-TV/

VCR sur la position TV.

Les câbles audio sont-ils femement connectés?

Vérifier le nivear du volume.

Les haut-parleurs fonctionnent-ils?

Mettre le mode sous-titrage hors service “ARRÊT”

Mode d’économie d’énergie sur “ARRÊT”.

Débrancher le téléviseur et le rebrancher après deux

minutes.

XXXXXXX X XXXXXXX X

X XXXXXX X XXXXXXX XX X

X X XXXXX X XXXXXXX XX X

XXXXXXXXXX X X X X X XX X

XXXXXXX X XXXXXX X XX X

XXXXXXX X XXXX XXXX X X

X X XXXXX X XXXXXXX XX X

XXXXXXX X XXXXXXXX X X

XXXXXXXXX XXXX XXX X X

XXXXXXX X XXXXXXXXX X

XXX XXXX X XXXXXXXX X X

X X XXXXX X XXXXXXX XX

X X XXXXX X XXXXXXX XX X

X X XXXXX X XXXXXXXX XX

XXX XXXX X X XXXXXXX X X

PROBLEM

Pas de reproduction d’un magnéto-

scope ou lecteur de disque

Pas d’image ou de son d’un appareil

vidéo/audio externe

La télécommande ne fonctionne pas

Barres sur l’écrarn

Distorsion de l’image

L’image défile verticalement

Pas de couleur

Fabile réception de certains canaux

Image affaiblie

Lignes ou rayures dans l

’image

Images fantômes

Image brouillée

Son normal, image médiocre

Image normale, son médiocre

Ni son, ni image

Image sombre et vide

Bruit élecrtique extérieur interférant

avec le fonctionnement du t

éléviseur

Couleur sur une partie de l

’écran

semble altérée

32C530(56-57) 1/29/03, 2:45 PM57

Dimension: 140mm x 215mm

Notes

32C530(58-60) 1/29/03, 2:45 PM58

Dimension: 140mm x 215mm

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

Limited Warranty

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp

brand product (the “Product”), when shipped in its original container, will be free from defective

workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the

defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser

for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which

has been subjected to improper voltage or other misuse, abnormal service or handling, or which has

been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth

below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to

purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE

OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall

be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and

for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction

of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by

repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be

liable or in any way responsible for any incidental or consequential economic or property damage.

Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion

may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description: 32C530, 32 inch Color Television (Be sure to have

this information available when you need service for

your Product.)

Warranty Period for this Product: One (1) year parts and labor. The warranty period

continues for an additional one (1) year, for a total

of two (2) years, with respect to the picture tube(s)

in the Product for parts only. Labor and service are

not provided free of charge for this additional period.

Additional Item(s) Excluded from Non-rechargeable batteries.

Warranty Coverage (if any):

Where to Obtain Service: From a Sharp Authorized Servicer located in the

United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1-

800-BE-SHARP.

What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain

in-home service for this Product. The Servicer will

come to your home and if it is necessary to remove

the Product, the Servicer will reinstall it. Be sure to

have Proof of Purchase available.

32C530(58-60) 1/29/03, 2:45 PM59

Printed in Mexico

TINS-A775WJZZ

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

32C530(58-60) 1/29/03, 2:45 PM60

Sharp 32C530 Manual de usuario

Marca: Sharp

Modelo: 32C530

Categoría: Televisores CRT

Tipo: Manual de usuario

Este manual también es adecuado para

Descargar PDF

informe

En otros idiomas

français: Sharp 32C530 Manuel utilisateur
English: Sharp 32C530 User manual

Sharp 32C530 Manual de usuario

Este manual también es adecuado para

Sharp 32C530 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos