Yamaha PSR-E443 El manual del propietario

Marca: Yamaha

Modelo: PSR-E443

Categoría: Teclados MIDI

Tipo: El manual del propietario

DIGITAL KEYBOARD

Setting UpReferenceAppendix Quick Guide

Owner’s Manual

PSR-E443 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING: Do not place this product in a position where anyone

could walk on, trip over, or roll anything over power or connecting

cords of any kind. The use of an extension cord is not recommended!

If you must use an extension cord, the minimum wire size for a 25’

cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the

larger the current handling capacity. For longer extension cords, con-

sult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class "B" digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit "OFF" and "ON", please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

PSR-E443 Owner’s Manual

Information for Users on Collection and Disposal of Old Equipment

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not

be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your

national legislation and the Directives 2002/96/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or

the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask

for the correct method of disposal.

(weee_eu_en_01)

For AC Power Adaptor

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with

your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the

correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical

involved.

(weee_battery_eu_en_01)

For PSR-E443

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt — også

selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

Entsorgung leerer Batterien

(nur innerhalb Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien

oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei

einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben

werden. Informieren Sie sich bei Ihrer Kommune.

(battery)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif.

90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : PSR-E443

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

PSR-E443 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 65) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• Follow the precautions below. Failure to do so might result in explosion, fire,

overheating or battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

- Do not attempt to recharge batteries that are not designed to be charged.

- Keep the batteries separate from metallic objects such as necklaces, hairpins,

coins, and keys.

- Use the specified battery type (page 13) only.

- Use new batteries, all of which are the same type, same model, and made by

the same manufacturer.

- Always make sure all batteries are inserted in conformity with the +/- polarity

markings.

- When the batteries run out, or if the instrument is not to be used for a long

time, remove the batteries from the instrument.

- When using Ni-MH batteries, follow the instructions that came with the

batteries. Use only the specified charger device when charging.

• Keep batteries away from small children who might accidentally swallow them.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

Power supply/AC power adaptor

Location

DMI-5 1/2

PSR-E443 Owner’s Manual

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in order to

avoid noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the

possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Some data items (page 34) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to malfunction or incorrect

operation. Save important data to external device such as a USB flash memory (page 56).

• To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights.

Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of

such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR

USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs and the optional songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument.

• iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

PSR-E443 Owner’s Manual

Quick Guide Reference AppendixSetting Up

Table of Contents

Special Features ..............................................................6

Compatible Format and Functions ...................................8

Included Accessories .......................................................8

About the Manuals ...........................................................9

Setting Up

Panel Controls and Terminals 10

Setting Up 12

Power Requirements......................................................12

Connecting Headphones or External Audio Equipment

...14

Connecting a Footswitch to the [SUSTAIN] jack............14

Basic Operations 15

Turning the Power On/Off ..............................................15

Auto Power Off Function ................................................15

Selecting Operations......................................................15

Display Items 16

Quick Guide

Try Playing a Variety of Instrument Voices 17

Selecting a Main Voice...................................................17

Playing the “Grand Piano”..............................................17

Layering a Dual Voice ....................................................18

Playing a Split Voice in the Left Hand area....................18

Using the Metronome.....................................................19

Adding Harmony ............................................................20

Creating Arpeggios 21

Triggering the Arpeggio..................................................21

Changing the Arpeggio Type .........................................21

Creating Original Sounds via the Knobs 22

Selecting a Knob Effect Combination.............................22

Applying the Filter to the Main Voice..............................22

Playing Styles 23

Using the Music Database .............................................23

Playing with Patterns Like a DJ! 24

Playing Songs25

Listening to a Demo Song..............................................25

Selecting and Playing Back a Song ...............................25

Song Fast Forward, Fast Reverse, and Pause..............26

A-B Repeat ....................................................................26

Turning Each Track On/Off ............................................26

Using the Song Lesson Feature 27

Three Types of Song Lesson.........................................27

Practicing with Song Lesson..........................................27

Making Practice Perfect—Repeat & Learn ....................28

Playing an External Audio Device with the Built-in Speakers

Using the Melody Suppressor........................................29

Recording Your Performance 30

Track Structure of a Song ..............................................30

Quick Recording ............................................................30

Recording to a Specified Track......................................31

Clearing a User Song.....................................................32

Clearing a Specified Track from a User Song................32

Memorizing Your Favorite Panel Settings33

Memorizing Panel Settings to the Registration Memory

...33

Recalling Panel Settings from the Registration Memory

..33

Using with a Computer or iPad/iPhone 34

Connecting to a computer..............................................34

Connecting an iPad/iPhone ...........................................34

Backup and Initialization 34

Backup Parameters .......................................................34

Initialization ....................................................................34

Play a Variety of

Instrument Voices

Page 17

The instrument voice that sounds

when you play the keyboard can be

changed to violin, flute, harp, or

any of an extensive range of

voices.

Arpeggio Function

Page 21

Similar to the arpeggio functions

provided on some synthesizers,

this function automatically pro-

duces arpeggios (broken chords)

when you simply play the appro-

priate notes on the keyboard.

Convenient Melody

Suppressor

Page 29

When the sound of an external

audio device is output through this

instrument, you can cancel or

lower the volume of the melody

part of stereo playback with this

function, and play the melody part

yourself.

Special Features

PSR-E443 Owner’s Manual

Quick GuideReferenceAppendix Setting Up

Reference

Handy Performance Features 35

Selecting a Reverb Type................................................35

Selecting a Chorus Type................................................35

Pitch Controls—Transpose ............................................36

Pitch Controls—Fine Tuning ..........................................36

Pitch Controls—the PITCH BEND wheel .......................36

Calling Up Optimum Panel Settings

—One Touch Setting (OTS).......................................36

Changing the Touch Response of the Keyboard ...........37

Selecting an EQ Setting for the Best Sound ..................37

Scale Tuning 38

Selecting Scale ..............................................................38

Setting the Base Note for Each Scale............................38

Tuning Each Note to Create an Original Scale ..............39

Voice Settings40

Selecting a Dual Voice ...................................................40

Selecting a Split Voice ...................................................40

Voice Editing ..................................................................40

Parameters Assigned to the Knobs 41

Arpeggio Settings43

Synchronizing an Arpeggio to Song/Style/Pattern

Playback—Arpeggio Quantize ...................................43

Holding the Arpeggio Playback via the Footswitch ........43

Styles (Auto Accompaniment) and Patterns 44

Style Variations—Sections.............................................44

Synchro Stop..................................................................45

Turning Each Track Of Style On/Off...............................45

Pattern Variations—Sections .........................................46

Pattern Retrigger Function .............................................46

Changing the Tempo......................................................46

Tap Start ........................................................................46

Adjusting the Volume of the Style or Pattern .................47

Setting the Split Point.....................................................47

Playing Chords Without Style Playback.........................47

Chord Types for Style Playback.....................................48

Looking Up Chords Using the Chord Dictionary ............49

Song Settings50

BGM (Background Music) Playback ..............................50

Random Song Playback ................................................50

Tempo Setting of the Song ............................................51

Tap Start ........................................................................51

Song Volume .................................................................51

Melody Voice Setting of the Preset Song ......................51

The Functions 52

Basic Procedure in the Function Display .......................52

USB Flash Memory Operations 56

Connecting a USB Flash Memory..................................57

Formatting a USB Flash Memory...................................58

Saving User Data to a USB Flash Memory....................59

Saving a User Song as SMF to a USB Flash Memory...60

Loading User Data from a USB Flash Memory..............60

Loading a Style File .......................................................61

Deleting a User File in the USB Flash Memory..............62

Deleting a SMF File in the USB Flash Memory..............62

Exiting from a File Control display..................................63

Appendix

Troubleshooting ............................................................. 64

Specifications................................................................. 65

Index .............................................................................. 66

Play Along with Styles

Page 23

The auto-accompaniment Styles

provide the equivalent of a full

backing band covering a wide vari-

ety of music genres. Select a Style

that matches the music you want to

play, or experiment with new

Styles to expand your musical

horizons.

Create New Sounds

Page 22

By adjusting just two knobs you

can add varying degrees of distor-

tion, or other characteristics to the

sound to enhance it subtly or

change it dramatically.

Try playing like a DJ by

using the Patterns!

Page 24

The Pattern function lets you per-

form like a DJ. Use the Track Con-

trol to try out various instrument

combinations, and play with the

Knobs to create various new

sounds.

049

EuTrance

PSR-E443 Owner’s Manual

Setting Up

Included Accessories

• Owner’s Manual (this book)

• Data List

• AC Power Adaptor

• Music Rest

• Online Member Product Registration

*1: May not be included depending on your particular locale. Check with your Yamaha dealer.

*2: The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.

Compatible Format and Functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible

music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer.

The GM mark is affixed to all software and hardware products that support GM System Level.

XGlite

As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation for-

mat. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in

mind that some songs may play back differently compared to the original data, due to the reduced set of

control parameters and effects.

USB

USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with

peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the

computer is on).

STYLE FILE

The Style File Format is Yamaha’s original style file format which uses a unique conversion system to

provide high-quality automatic accompaniment based on a wide range of chord types.

About audio files

This instrument does not feature audio file playback or audio recording. Also, audio signals created via your keyboard per-

formance cannot be transferred to the computer or iPad/iPhone even if one of them is connected to the USB [TO HOST]

terminal of this instrument.

Insert the music rest

into the slots as

shown.

Music Rest

PSR-E443 Owner’s Manual

Setting Up

About the Manuals

This instrument has the following documents and instructional materials.

 Included Documents

Owner’s Manual (this book)

• Setting Up Please read this section first.

• Quick Guide This section explains how to use the basic functions. Refer to this section while

playing the instrument.

• Reference This section explains how to make detailed settings for the various functions of

the instrument.

• Appendix This section includes troubleshooting information and specifications.

Data List

Contains various important preset content lists such as those of Voices, Styles, Patterns and Effects.

 Online Materials (from Yamaha Downloads)

MIDI Reference

Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart.

MIDI Basics (only in English, French, German and Spanish)

Contains basic explanations about MIDI.

Computer-related Operations

Includes instructions on connecting this instrument to a computer, and operations related to transferring song

data.

iPhone/iPad Connection Manual

Explains how to connect the instrument to smart devices, such iPhone, iPad, etc.

To obtain these manuals, access the Yamaha Downloads. Select your country, enter “PSR-E443” to the Model

Name box, then click [SEARCH].

Yamaha Downloads http://download.yamaha.com/

Online Materials (for Yamaha Online members)

Song Book (only in English, French, German, Spanish and Japanese)

Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument and the optional

Songs

Song Data

Contains the data of 70 Songs that can be played back with this instrument and/or used for the Song Lesson

(Page 27).

After completing the user registration at the website below, you can download the Song Book and the Song

Data free of charge.

Yamaha Online Member https://member.yamaha.com/

You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this

manual in order to fill out the User Registration form.

* The downloaded Song data can be played back by transferring data from the computer to the instrument or saving

data to the USB flash memory. For instructions on Song playback, refer to “Selecting and Playing Back a Song” on

page 25.

PSR-E443 Owner’s Manual

Setting Up

Panel Controls and Terminals

Front Panel

q [MASTER VOLUME] control ................Page 15

w PITCH BEND wheel..............................Page 36

e [ ] (Standby/On) switch ....................Page 15

r LIVE CONTROL section

[ASSIGN] button ...............................Page 22

[A] and [B] knobs .............................Page 22

t [DEMO] button......................................Page 25

y [LESSON] button..................................Page 27

u [REC] button.........................................Page 30

i [METRONOME] button.........................Page 19

o [TEMPO/TAP] button............................Page 46

!0 [TRANSPOSE] button ..........................Page 36

!1 [MELODY SUPPRESSOR] button........Page 29

!2 [PORTABLE GRAND] button...............Page 17

!3 VOICE CONTROL section

[SPLIT] button...................................Page 18

[DUAL] button ...................................Page 18

[HARMONY] button ..........................Page 20

[ARPEGGIO] button..........................Page 21

!4 Playback Control buttons

• When the [PATTERN] lamp is turned on:

................................Pages 24 and 46

• When the [SONG] lamp is turned on:

..............................................Page 26

• When the [STYLE] lamp is turned on:

.........................Pages 23, 44, and 45

GrandPno

001

t y u i

!0 !1

!4 !5

Front Panel

Display (page 16)

036

(C1)

048

(C2)

060

(C3)

072

(C4)

As illustrated above, each note of the keyboard has a specific note number and name (e.g.,

036/C1), which is used in making various settings, such as Split Point.

Setting Up

PSR-E443 Owner’s Manual

Panel Controls and Terminals

Setting Up

!5 [TRACK CONTROL] buttons

• When the [PATTERN] lamp is turned on:

..............................................Page 24

• When the [SONG] lamp is turned on:

..............................................Page 26

• When the [STYLE] lamp is turned on:

..............................................Page 45

!6 [PATTERN] button ................................Page 24

!7 [SONG] button ......................................Page 25

!8 [STYLE] button .....................................Page 23

!9 [VOICE] button .....................................Page 17

@0 [MUSIC DATABASE] button.................Page 23

@1 [CATEGORY] buttons...........................Page 15

@2 [REGIST MEMORY] buttons ................Page 33

@3 [FUNCTION] button..............................Page 52

@4 Number buttons [1]–[9], [-/NO],

[0/EXECUTE] and [+/YES] buttons .....Page 15

@5 Drum illustrations for the Drum Kit....Page 17

These indicate the drum or percussion instrument assigned to

the corresponding keys (in the case of “Standard Kit 1,” shown

in the Drum Kit List of the separate Data List).

Rear Panel

@6 USB [TO HOST] terminal*....................Page 54

USB [TO DEVICE] terminal .................Page 56

@7 [SUSTAIN] jack .....................................Page 14

@8 [AUX IN] jack ........................................Page 29

@9 [PHONES/OUTPUT] jack .....................Page 14

#0 Power supply jack................................Page 12

* For connecting to a computer. For details, refer to “Computer-

related Operations” (page 9). When connecting, use an AB type

USB cable of less than 3 meters. USB 3.0 cables cannot be

used.

!7 !8 !9 @1

@7 @8

@9 #0

Rear Panel

Style List (Data List) Voice List (Data List)

Pattern List (Data List)

Dial (page 15)

Song List (Data List)

“Press & Hold” symbol

By holding down one of the

buttons having this symbol, you

can call up an alternate function,

other than the one called up

when simply pressing.

084

(C5)

096

(C6)

PSR-E443 Owner’s Manual

Setting Up

Power Requirements

Although the instrument will run either from an

optional AC adaptor or batteries, Yamaha recom-

mends use of an AC adaptor whenever possible. An

AC adaptor is more environmentally friendly than bat-

teries and does not deplete resources.

Using an AC Power Adaptor

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Connect the AC adaptor to the power supply jack.

3 Plug the AC adaptor into an AC outlet.

 Notice for the AC adaptor

Depending on your particular locale, the AC adaptor

having a separable plug should be used. In this case,

make sure to follow the explanations below for your

safety.

If the plug is accidentally removed from the AC

adaptor

Without touching the metallic section, slide the plug

into place as shown below then push it in completely

until you hear the click sound.

• Use the specified adaptor (page 65) only. Using the

wrong adaptor can result in damage to the instrument

or overheating.

• This adaptor is for indoor use only. Do not expose the

instrument to rain, use it near water or in damp or wet

conditions, or use it to hold any containers (such as

vases, bottles or glasses) containing liquids which

might spill into any openings.

• When setting up the product, make sure that the AC

outlet you are using is easily accessible. If some trou-

ble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet.

Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When

you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

WARNING

CAUTION

AC outlet

AC power

adaptor

• Make sure to keep the plug attached to the AC adaptor.

Using the plug alone can cause electric shock or fire.

• Never touch the metallic section when attaching the plug.

To avoid electric shock, short circuit or damage, also be

careful that there is no dust between the AC adaptor and

plug.

Slide the plug as

indicated.

The shape of the

plug differs depend-

ing on locale.

WARNING

PSR-E443 Owner’s Manual

Setting Up

Using Batteries

This instrument requires six “AA” size, Alkaline

(LR6)/Manganese (R6) batteries, or rechargeable

nickel-metal hydride batteries (rechargeable Ni-MH

batteries). The Alkaline batteries or rechargeable Ni-

MH batteries are recommended for this instrument,

since other types may result in poorer battery perfor-

mance.

 Installing the batteries

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Open the battery compartment cover located on the

instrument’s bottom panel.

3 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

4 Replace the compartment cover, making sure that it

locks firmly in place.

When battery power becomes too low for proper oper-

ation, the volume may be reduced, the sound may be

distorted, and other problems may occur. When this

happens, make sure to replace all batteries with new

ones or already-recharged ones.

 Setting the battery type

After installing the new batteries then turning the

power on, make sure to set the Battery Type to

Rechargeable type or not. For details, refer to page 55.

 Checking the power status on the

display

 Power source on the display

You can confirm the power source at the left corner of

the display.

When is shown, the power is supplied from the

AC power adaptor. When is shown, the power is

supplied from the batteries. When the AC power adap-

tor is connected with the batteries installed, the power

is supplied from the AC power adaptor and the

indication is shown.

 Remaining battery power indication

You can confirm the approximate amount of remain-

ing battery power at the top left of the display.

• When using Ni-MH batteries, follow the instructions that

came with the batteries. Use only the specified charger

device when charging.

• Connecting or disconnecting the power adaptor with bat-

teries installed may turn the power off, resulting in loss of

data being recorded or transferred at the time.

WARNING

NOTICE

• This instrument cannot charge the batteries. Use only the

specified charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

• Failure to set the Battery Type may shorten the amount of

the battery life. Make sure to set the Battery Type correctly.

Indicates that the power will be turned off

immediately. When rechargeable batteries are

used, this icon flashes before the power is

turned off.

Indicates that remaining power is insufficient

for operation. Before the power runs out,

replace all the batteries with new ones, or fully

recharged ones (when using rechargeable

types). Note that the instrument may not work

properly, including unusually soft volume and

poor sound quality when remaining power

becomes low.

Indicates that the remaining power is suffi-

cient.

NOTE

NOTICE

Only one of these is shown.

GrandPno

PSR-E443 Owner’s Manual

Setting Up

Connecting Headphones or

External Audio Equipment

Any pair of stereo headphones with a 1/4” stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The [PHONES/OUTPUT] jack also functions as an

external output. You can connect the [PHONES/OUT-

PUT] jack to a computer, keyboard amplifier, stereo

system, mixer, tape recorder, or other line-level audio

device to send the instrument’s output signal to that

device.

Connecting a Footswitch to the

[SUSTAIN] jack

You can produce a natural sustain as you play by

pressing an optional Footswitch plugged into the

[SUSTAIN] jack. Make sure that the footswitch plug

is properly connected to the [SUSTAIN] jack before

turning on the power.

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experi-

ence any hearing loss or ringing in the ears, consult a phy-

sician.

• Before connecting the instrument to other electronic com-

ponents, set all volume levels to the minimum, then turn

off the power for all components.

• When the instrument’s sound is output to an external

device, first turn on the power to the instrument, then to

the external device. Reverse this order when you turn the

power off.

CAUTION

NOTICE

• The sustain function does not affect split voices (page 18).

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

NOTE

PSR-E443 Owner’s Manual

Setting Up

Basic Operations

Turning the Power On/Off

Turn down the MASTER VOLUME control to “MIN”

then press the [ ] (Standby/On) switch to turn on the

power. While playing the keyboard, adjust the MAS-

TER VOLUME control. To turn off the power, press

the [ ] (Standby/On) switch again for a second.

Auto Power Off Function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The amount

of time that will elapse before the power is automati-

cally turned off is set by default to 30 minutes.

 To disable the Auto Power Off function:

Turn off the power, then press the [ ] (Standby/On)

switch to turn on the power while holding down the

lowest key.

You can set the time that elapses before Auto Power

Off is executed. For details, refer to the Function List

(page 55).

Selecting Operations

Before operating the instrument, it may be helpful to

familiarize yourself with the basic controls below that

are used to select items and change values.

 Dial

Rotate the dial clockwise to

increase the value, or counter-

clockwise to decrease the

value.

 Number buttons

Use the Number buttons to directly enter an item or

value. For numbers that start with one or two zeroes,

the first zeroes can be omitted.

 [-/NO] and [+/YES] buttons

Press the [+/YES] button briefly to increase the value by

1, or press the [-/NO] button briefly to decrease the value

by 1. Press and hold either button to continuously increase

or decrease the value in the corresponding direction.

 CATEGORY buttons

Use these buttons to jump to the first

Voice, Style, or Song in the next or

previous Category, and call up the next

or previous Function sequentially.

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC power adaptor from

the wall AC outlet.

• Generally, the data and settings are maintained even when the

power is turned off. For details, see page 34.

• Depending on the instrument status, the power may not

turn off automatically, even after the elapse of the specified

period of time. Always turn off the power manually when

the instrument is not in use.

CAUTION

NOTE

NOTICE

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to pro-

tect the devices from damage. If you do not want the

power to turn off automatically when a device is con-

nected, disable Auto Power Off.

In most procedures described throughout this owner’s

manual the dial is recommended for selection simply

because it is the easiest and most intuitive selection

method. Please note however, that most items or values

that can be selected using the dial can also be selected

using the [+/YES] and [-/NO] buttons.

IncreaseDecrease

Press number buttons

[0], [0], [3].

Example: Selecting Voice 003,

Bright Piano.

Press briefly to

increase.

Press briefly to

decrease.

PSR-E443 Owner’s Manual

Setting Up

Display Items

The display shows all the current settings of the Song, Style Pattern, Voice and other

related functions.

GrandPno

001

This area indicates the on/off status of

each function. Each indication is

shown when the corresponding func-

tion is turned on.

Page 18

Page 20

Page 21

Page 37

Page 23

Page 45

Page 38

Page 29

On/off status

Normally this indicates the notes you play.

When the Song Lesson function is used, this

indicates the current notes and chord of play-

back. When the Dictionary function is used,

this indicates the notes of the chord you specify.

Notation

• Any notes occurring below or above the staff are

indicated by “8va.”

• For a few specific chords, not all notes may be

shown, due to space limitations in the display.

NOTE

Indicates the source from which this

instrument obtains power, AC power

adaptor or batteries. (Page 13)

Appears when USB flash memory is

connected to this instrument. (Page 56)

Power source status

USB connection status

Indicates the current beat of playback. (Page 25)

Indicates the parameters currently assigned to the

Knobs. (Page 22)

Indicates the Function number when the [FUNC-

TION] button is pressed, or the current Measure

number during playback of a Song, Style or Pattern.

Indicates the chord which is being played on the key-

board (Page 23) or specified via Song playback.

Indicates the on/off status of the current

Song, Style or Pattern. (Pages 24, 30,

45)

Beat

Knob assignment

FUNCTION and MEASURE

Chord

Track status

001

PSR-E443 Owner’s Manual

Quick Guide

Try Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments, this instru-

ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,

drums and percussion, and even sound effects—giving you a wide variety of musical

sounds.

Press the [VOICE] button.

The Voice number and name will be shown.

For details, refer to the front panel or the Voice

List of the separate Data List.

Use the dial to select the desired Voice.

Play the keyboard.

Preset Voice Types

When you want to reset various settings to default and

simply play a Piano sound, press the [PORTABLE

GRAND] button.

The Voice number is set to 001 Grand Piano and the

settings such as Dual and Split are turned off automat-

ically.

Selecting a Main Voice

001–234 Instrument Voices.

235–258

(Drum Kit)

Various drum and percussion sounds are

assigned to individual keys. Details on assign-

ing instruments to keys are provided in the

Drum Kit List of the separate Data List.

259–298 Used for arpeggio performance (page 21).

299–755 XGlite Voices.

000

Selecting this automatically calls up the most

suitable Voice for the current Style, Song or

Pattern. For details, see page 36.

GrandPno

001

Appears after the [VOICE]

button is pressed.

Voice name

Voice number

Flute

134

Select 134 Flute

Playing the “Grand Piano”

Quick Guide

Try Playing a Variety of Instrument Voices

PSR-E443 Owner’s Manual

Quick Guide

In addition to the Main Voice, you can layer a differ-

ent Voice over the entire keyboard as a “Dual Voice.”

Press the [DUAL] button to turn Dual on.

Press the [DUAL] button again to exit

from Dual.

Although turning on Dual will select a Dual Voice

suitable for the current Main Voice, you can easily

select a different Dual Voice (page 40).

By dividing the keyboard into the two separate areas,

you can play a different Voice between the Left hand

and Right hand areas.

Press the [SPLIT] button to turn on Split.

The keyboard is divided into the Left hand and

Right hand areas.

You can play a “Split Voice” on the Left hand area

of the keyboard while playing a Main Voice and

Dual Voice on the Right hand area of the key-

board.

The highest key for the Left hand area is referred

to as the “Split Point” which can be changed from

the default F#2 key. For details, refer to page 47.

Press the [SPLIT] button again to exit

from Split.

You can easily select a different Split Voice (page 40).

Layering a Dual Voice

Flute

134

Two voices will

sound at the

same time.

Appears when

dual voice is on

Playing a Split Voice in the Left

Hand area

Flute

134

Appears when split

voice is on

Split voice

Main voice and dual voice

Split Point ... default value: 054 (F#2)

036

(C1)

048

(C2)

060

(C3)

072

(C4)

084

(C5)

096

(C6)

Try Playing a Variety of Instrument Voices

PSR-E443 Owner’s Manual

Quick Guide

The instrument features a built-in metronome (a

device that keeps an accurate tempo), convenient for

practicing.

Press the [METRONOME] button to start

the metronome.

Press the [METRONOME] button again

to stop the metronome.

Adjusting the Metronome Tempo

Press the [TEMPO/TAP] button to call up

“Tempo.”

Adjust the Tempo value by rotating the

dial.

Setting the Time Signature

Here, we’ll set a time signature of 5/8 as an example.

Hold down the [METRONOME] button

for longer than a second to call up

“TimeSigN” (Time Signature Numera-

tor).

The number of beats per measure is shown on the

display.

Rotate the dial to select the number of

beats per measure.

A chime will sound on the first beat of each mea-

sure while the other beats will click. If “0” is

selected, all beats will simply click with no chime.

Select 5 for this example.

Press the CATEGORY [+] button to call

up “TimeSigD” (Time Signature Denomi-

nator).

The length of one beat is shown on the display.

Rotate the dial to select the length of

one beat, from 2

, 4

, 8

and 16

note.

Select “08” (8

note) for this example.

Confirm the setting by playing the Met-

ronome.

Setting the Metronome Volume

Press the [FUNCTION] button.

Press the CATEGORY [+] or [-] buttons

repeatedly until “MtrVol” (Function 068)

appears.

Rotate the dial to set the Metronome Vol-

ume.

Using the Metronome

Tempo

090

Current Tempo value

TimeSigN

Number of beats

per measure.

Hold for longer

than a second.

• This parameter cannot be set during playback of a Style,

Song or Pattern.

NOTE

TimeSigD

The length

of one beat.

MtrVol

100

068

Metronome volume

Try Playing a Variety of Instrument Voices

PSR-E443 Owner’s Manual

Quick Guide

You can add harmony notes to the Main Voice.

Press the [HARMONY] button to turn

Harmony on.

Although turning on the Harmony will select a

Harmony Type suitable for the current Main

Voice, you can select a different Harmony Type.

Hold down the [HARMONY] button for

longer than a second until “HarmType”

appears on the display.

After “HarmType” is shown for a few seconds, the

current Harmony Type appears.

Rotate the dial to select the desired Har-

mony Type.

For details, refer to the Effect Type List of the sep-

arate Data List.

The effect and operation differs depending on the

Harmony Type. Refer to “How to sound each Har-

mony Type” below.

Press the [HARMONY] button again to

turn Harmony off.

Adjusting the Harmony Volume

You can adjust the Harmony Volume in the Function

Settings (page 53).

Adding Harmony

Appears when the Harmony

is turned on.

HarmType

039

Trio

039

Hold for longer

than a second.

Current Harmony Type

How to sound each Harmony Type

• Harmony type 01 to 05

Press the right-hand keys while playing chords in

the auto accompaniment range of the keyboard

when the Auto Accompaniment is on (page 23).

• Harmony type 06 to 12 (Trill)

Hold down two keys.

• Harmony type 13 to 19 (Tremolo)

Keep holding

down the keys.

• Harmony type 20 to 26 (Echo)

Play the keys.

PSR-E443 Owner’s Manual

Quick Guide

Creating Arpeggios

The Arpeggio function lets you create arpeggios (broken chords) by simply pressing

the notes of the chord. For example, you could play the notes of a triad—the root, third,

and fifth—to trigger interesting phrases. This feature can be used for music production

as well as performance.

Press the [ARPEGGIO] button to turn on

the Arpeggio function.

Press a note or notes to trigger Arpeg-

gio.

The Arpeggio phrase differs depending on the

number of pressed notes and the area of the key-

board.

When Split is on, Arpeggio is applied only to the

Split Voice. When Split is off, Arpeggio is applied

to the Main and Dual Voices. Arpeggio cannot be

applied to the Split and Main/Dual Voices simulta-

neously.

To turn off the Arpeggio, press the

[ARPEGGIO] button again.

The most suitable Arpeggio Type is automatically

selected when you select a Main Voice, but you can

easily select any other Arpeggio Type.

Hold down the ARPEGGIO [TYPE] but-

ton for long er than a second.

In the display, “ARP Type” appears for a few sec-

onds, followed by the current Arpeggio Type

appears.

Rotate the dial to select the desired

Arpeggio type

An Arpeggio Type List is provided in the separate

Data List.

Triggering the Arpeggio

• Selecting a Voice number between 259 and 298 will turn

on Arpeggio automatically.

• Selecting a Voice number between 289 and 298 will turn

on Split automatically, as well as Arpeggio. When one of

those Voices is selected, Arpeggio is triggered only by

playing a key to the left of the Split Point.

• When an optional Footswitch (page 14) connected to the

SUSTAIN jack is pressed, the Arpeggio will continue to

play after the note is released (page 43).

RS Sync1

150

NOTE

Changing the Arpeggio Type

Hold for longer

than a second.

SynArp1

004

The currently selected arpeggio

type

PSR-E443 Owner’s Manual

Quick Guide

Creating Original Sounds via the Knobs

The two knobs located in the lower left area of the panel can be used to add variations

to the sound being played, transforming the sound in a variety of musical ways. Select

the desired pre-programmed effect combination printed above the Knobs, then rotate

the Knobs to enjoy the sound.

Repeatedly press the [ASSIGN] button to sequentially

select the five effect combinations provided: (1)

 (2)

 (3)  (4)  (5)  (6)  (1) … etc. The current

combination is shown in the display.

The target sound differs depending on the effect com-

bination (selected number).

For details about each Knob effect, refer to page 41.

Select the desired Main Voice.

Here, select “Voice No.153 SquareLd” (Square

Lead) as a synth-lead type Voice.

Press the [ASSIGN] button several times

until (1) (Filter) appears in the display.

Rotate Knob B all the way to the right

(maximum), then play the keyboard with

your right hand while operating Knob A

with your left.

Selecting a Knob Effect Combi-

nation

Effect

Combination

Target Sound and Function

1FILTER

Controls the sound of the Main Voice and Dual

Voice.

2 EFFECT

3EG

STYLE

FILTER

Controls the sound of the Style (page 23) or

Pattern (page 24)

5AUX IN

Controls mainly audio sound coming from an

external audio device connected to the AUX IN

jack.

* Knob B can be used to control the volume of Style/

Song/Pattern sound with the keyboard sound main-

tained, even if an external audio device is not con-

nected.

SPECIAL

EFFECT

Knob A controls the entire sound while Knob B

controls only the Pattern sound.

• Only selecting a Knob effect combination will not affect the

sound even if the Knob arrow is not at the initial position. After

operating the Knob, the selected effect is applied to the

sound.

GrandPno

001

Current value

NOTE

Applying the Filter to the Main

Voice

• When z or x or c appears in the display by pressing

[ASSIGN] button, selecting a different Voice will

replace the settings created via the Knobs with the

default settings of the new Voice. If you create a

sound with the Knobs that you wish to keep, make

sure to memorize the settings to Registration Memory

(page 33) before selecting a different Voice.

• Rotating a Knob to the right while the volume is set to a

high level may result in distortion. If this occurs, reduce

the volume level.

Filter

Cutoff

Filter

Resonance

NOTICE

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Playing Styles

This instrument includes the Auto Accompaniment feature that plays appropriate

“Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety

of Styles covering a wide range of musical genres.

Press the [STYLE] button, then use the

dial to select the desired Style.

The Style List is provided on the front panel, or in

the Data List (page 9).

Press the [ACMP ON/OFF] button to turn

on the Auto Accompaniment.

With this operation, the area of the keyboard to the

left of the Split Point (054: F#2) becomes the

“Auto Accompaniment range” and is used only for

specifying the chords.

Press the [SYNC START] button to turn

Synchro Start on.

Play a chord in the Auto Accompani-

ment range to start playback.

Play a melody with the right hand and chords with

the left hand.

For information about chords, refer to “Chord

List” (page 48) or use the Chord Dictionary func-

tion (page 49).

Press the [START/STOP] button to stop

playback.

You can add intro, ending and rhythm variations to

Style playback by using “Sections.” For details,

refer to page 44.

If you have difficulty finding and selecting the desired

Style and Voice, use this feature. From the Music

Database, just selecting the favorite music genre calls

up the ideal settings.

Press the [MUSIC DATABASE] button.

Both the Auto Accompaniment and Synchro Start

are automatically turned on.

Use the dial to select the desired Music

Database.

This operation calls up the panel settings such as

Voice and Style that are registered to the selected

Music Database. The Music Database List is pro-

vided in the Data List (page 9).

Play the keyboard as described in Steps

4–5 above.

BritRock

001

This icon appears when a style

number and name is displayed.

Style Name

Style Number

EuTrance

049

This icon appears when automatic

accompaniment is on.

Auto Accompaniment

range

Split Point (page 47)

036

(C1)

048

(C2)

060

(C3)

072

(C4)

084

(C5)

096

(C6)

EuTrance

049

Flashes when sync start is on.

Using the Music Database

Split Point

Jude Hey

001

Music Database name

PSR-E443 Owner’s Manual

Quick Guide

Playing with Patterns Like a DJ!

The Pattern playback function lets you repeatedly play various rhythm patterns, and is

particularly effective in Hip-Hop, House music, etc. Try out the cool DJ-like perfor-

mance features—changing keys in the left-hand area of the keyboard and rotating the

Knobs for dynamic sound variations.

Press the [PATTERN] button, then use

the dial to select the desired Pattern.

The ACMP is turned on, and the keyboard is

divided into the accompaniment area (page 23)

and melody area.

Press the [START/STOP] button or press

any key to left of the Split Point (pag e

47) to start Pattern playback.

During Pattern playback, enjoy creating sound

variations via the following operations.

 Turning on/off individual tracks via the

[TRACK CONTROL] buttons

 Changing the Pattern Section via the

[A]–[E] buttons

 Using Retrigger function

(page 46)

Pressing the button of the currently playing

Section restarts playback from the beginning.

Holding down the button lets you loop-play

only the top portion of the Section.



Transposing playback by pressing any

note to the left of the Split Point (page 47)

Unlike with the Styles, only the Root can be

specified; the Chord Type cannot be specified.

 Changing the sound via the Knobs

Press the [ASSIGN] button several times to

select “4 STYLE FILTER” then rotate the

Knobs A and B.



Applying the Arpeggio to the right-hand area

Press the [ARPEGGIO] button to turn it on,

then press the notes in the right-hand area of

the keyboard.

Press the [START/STOP] button to stop

playback.

• Up to two Track buttons can be pressed simultane-

ously for turning on or off.

FrenchDJ

001

Flashes

Split Point

On/off status is shown in

the display (page 16)

NOTE

SECT B

• When you select a Voice between 289 and 298,

Arpeggio is applied only to the Split Voice. Playing a

key to the left of the Split Point turns Arpeggio on as

well as specifies the key for Pattern playback.

SECT B

Split Point

Specified key

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Playing Songs

You can simply enjoy listening to the internal Songs, or use them with just about any of

the functions, such as Lesson.

 Song Category

The Songs are organized by category as listed below.

Press the [DEMO] button to play Songs in sequence.

Playback will repeat continuously, starting again from

the first Song (001).

To stop playback, press the [DEMO/BGM] or

[START/STOP] button.

Press the [SONG] button, then use the

dial to select the desired Song.

Refer to the Song List in the Data List (page 9).

You can select User Songs, Songs transferred from

a computer, and Songs in USB flash memory in

the same way as above.

Press the [ ] (Start/Stop) button to

start playback.

To stop playback, press the [ ] (Start/Stop)

button again.

About audio files

Among Song formats, only MIDI files can be played back by this instrument. Audio files cannot be played back (or shown as

Song numbers), even if they are saved in the USB flash memory connected to the USB [TO DEVICE] terminal.

• In addition to the 30 Preset Songs in this instrument, you can enjoy Optional Songs downloadable from the Yamaha website. For

details, refer to page 9.

• When you transfer a Song from a computer while the USB flash memory is connected to the USB [TO DEVICE] terminal, the transferred

Song will be inserted before the first USB Song number, moving all USB Song numbers later in sequence.

• Gives you an idea of the advanced capabilities of this instrument.

• Demonstrates many useful Voices of this instrument.

• These piano solo pieces are ideally suited for the Song Lesson.

• These piano ensemble pieces are also well suited for the Song Lesson.

• When you need to practice backing (accompaniment) patterns, these songs are ideal for that purpose.

• Songs you record yourself.

• FLASH MEMORY: Songs transferred from a computer.

• USB: Songs in the USB flash memory.

These songs are shown in the display in the following sequence: Songs transferred from a

computer, Songs in the USB flash memory. To transfer Songs from a computer to this

instrument, refer to “Computer-related Operations” (page 9). For Songs in USB flash

memory, refer to page 58.

NOTE

Listening to a Demo Song

Selecting and Playing Back a

Song

• External MIDI Songs containing the Portamento Control

and Scale Tune settings may not be played correctly.

Jeanie

013

Current Song

Jeanie

013

Each arrow mark flashes in time

with the beat.

NOTE

Playing Songs

PSR-E443 Owner’s Manual

Quick Guide

Like the transport controls on an audio player, this

instrument lets you fast forward [ ] (Fast Forward),

rewind [ ] (Fast Reverse) and pause [ ] (PAUSE)

playback of the Song.

You can play back only a specific section of a Song

repeatedly by setting the A point (start point) and B

point (end point) in one-measure increments.

Start playback of the Song (page 25).

When playback reaches to the point you

want to specify as the start point, press

the [ ] (A-B REPEAT) button to set

the A point.

When playback reaches to the point you

want to specify as the end point, press

the [ ] (A-B REPEAT) button again to

set the B point.

The specified A-B section of the song will now

play repeatedly.

To cancel repeat playback, press the

[ ] (A-B REPEAT) button again.

To stop playback, press the [START/STOP] but-

ton.

Each “track” of a Song plays a different part—mel-

ody, percussion, accompaniment, etc. Each of the

tracks can be muted so that you can play the muted

part yourself. Pressing the desired Track button

repeatedly will toggle the on/off status.

Song Fast Forward, Fast

Reverse, and Pause

• When the A-B repeat is specified, the Fast Reverse and Fast

Forward will only work within the range between A and B.

• [REW], [FF] and [PAUSE] button cannot be used during Song

playback by using the [DEMO] button.

A-B Repeat

Fast Reverse

During playback, press

this button to rapidly

return to an earlier point

in the Song.

Fast Forward

During playback, press this

button to rapidly skip ahead to

a later point in the Song.

Pause

During playback, press

this button to pause play-

back, and press again to

start from that point.

NOTE

• If you want to set the start point “A” at the top of the

Song, press the [ ] (A-B REPEAT) button before

starting playback.

Turning Each Track On/Off

• Up to two Track buttons can be pressed simultaneously for

turning on or off.

NOTE

Track number off—Track is

muted or contains no data

Track number on—Track will playback

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Using the Song Lesson Feature

You can use the selected Song for a left-hand, right-hand, or both-hands lesson. Try

practicing with these three Song Lesson types while referring to the music scores in

the Song Book (page 9).

Lesson 1—Listen

In this Lesson, you need not play the keyboard. The

model melody/chords of the part you selected will

sound. Listen to it carefully and remember it well.

Lesson 2—Timing

In this mode, simply concentrate on playing the notes

with the correct timing. Even if you play wrong notes,

the correct notes shown in the display will sound

Lesson 3—Waiting

In this Lesson, try playing the correct notes shown on

the display. The Song pauses until you play the right

note, and playback tempo will change to match the

speed at which you are playing at.

Select the desired Song for your lesson

(page 25).

Turn off the part you want to practice.

For the right-hand lesson, press the [1/RIGHT]

button to turn off the right-hand part. For the left-

hand lesson, press the [2/LEFT] button to turn off

the left-hand part. For the lesson using both hands,

turn off both the parts.

Pressing the [1/RIGHT] and [2/LEFT] buttons

repeatedly will toggle the on/off status of each

part, which can be shown on the display.

Press the [LESSON] button to start play-

back of the Song Lesson.

After starting playback, pressing the [LESSON]

button repeatedly will change the Lesson number

from 1: LISTEN  2: TIMING  3: WAITING

 off  1…. Press this button until the desired

number is shown on the display.

Three Types of Song Lesson

• If you want to keep a steady playback tempo is maintained

during Lesson 3: Waiting, set the Your Tempo parameter (page

54) to OFF.

LISTEN

TIMING

WAITING

NOTE

Practicing with Song Lesson

• The Song Lesson can be applied to Songs downloaded

at the Yamaha website (page 9), Songs transferred from

a computer, and Songs in USB flash memory (SMF for-

mat 0 only). However, some of the Lesson functions may

not be applied to some Songs due to the structure of the

Song data.

• The Song Lesson cannot be applied to the User Songs.

NOTE

ForElise

015

Track 1 is unlit

Track 2 is unlit

Track 1 and 2 are

unlit

Right-hand

lesson

Left-hand

lesson

Both-hands

lesson

Using the Song Lesson Feature

PSR-E443 Owner’s Manual

Quick Guide

To stop Lesson playback, press the [START/

STOP] button.

Even during playback, you can change the Lesson

number by pressing the [LESSON] button.

When Lesson playback reaches to the

end, check your evaluation Grade on the

display.

“2 Timing” and “3 Waiting” will evaluate your

performance in four levels: OK, Good, Very

Good, or Excellent.

If you want to practice a specific section in which you

made a mistake or you have difficulty with use the

Repeat & Learn function.

Press the [ ] (REPEAT & LEARN) button

during a Lesson playback.

The Song location will move back four measures, a

one-measure count will play, then Song playback will

start again. Playback of the four measures will repeat

with a one-measure count-in.

To exit from this status, press this button again.

See How You’ve Done

After the evaluation display has appeared, the les-

son will start again from the beginning.

TIMING

Lp2

007

The notation and

key positions you

should play are

shown.

Both-hands lesson 2 (TIMING)

is indicated as shown. Right-

hand lesson 2 is indicated as

“R2” and Left-hand lesson 2 is

indicated as “L 2.”

~~~~~~~

~~~~~~

~~~~

Excellent

Very Good

Good

When the lesson song has played all the way through

your performance will be evaluated in 4 levels: OK,

Good, Very Good, or Excellent. “Excellent!” is the

highest evaluation.

Making Practice Per-

fect—Repeat & Learn

• You can change the amount of measures the Repeat & Learn

function jumps back by pressing a number button [1]–[9] dur-

ing repeat playback.

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Playing an External Audio Device with the Built-in Speakers

You can output the sound of an external audio device, such as a portable music player,

with the built-in speakers of this instrument by connecting it via a cable. This lets you

play the keyboard along with playback of your music player.

Turn off the power for both the external

audio device and this instrument.

Connect the audio device to the instru-

ment’s [AUX IN] jack.

Use the cable which has the stereo-mini plug at

one side for connecting to this instrument and the

plug matching the output jack of the external

audio device at the other side.

Turn on the external audio device, then

this instrument.

Play back the connected external audio

device.

The sound of the audio device is output through

the speakers of this instrument.

Adjust the volume balance between the

audio device and this instrument.

Do this by adjusting both the volume of the audio

device and this instrument itself.

Play the keyboard along with the sound

of the audio device.

After finishing the performance, stop

playback of the audio device.

When the sound of an external audio device is output

through this instrument, you can cancel or lower the

volume of the melody part of stereo playback. You

can use the function to cancel the melody part then

practice it via the keyboard.

Play back the connected external audio

device.

Press the [MELODY SUPPRESSOR] but-

ton to turn it on.

Press the [ASSIGN] button to call up b.

Then, adjust the pan position of the

sound to be cancelled with Knob A

(page 41).

Press the [MELODY SUPPRESSOR] but-

ton again to turn it off.

• When you want to adjust the volume balance between

the audio device and this instrument further, after the vol-

ume of each has been adjusted, press the [ASSIGN]

button to call up b, then rotate the Knob B (page 41).

The knob B can adjust only the volume of the audio

device and Song/Style/Pattern playback sound.

• When you want to adjust the volume balance more, even

after having adjusted it with Knob B, adjust the volume

of the audio device using the function of this instrument.

Press the [FUNCTION] button, and hold down the CATE-

GORY [+] or [-] button until “AuxInVol” appears. Then,

set the value of the volume with the dial. In case of

adjusting the volume to more than 100, the audio device

sound can become distorted.

Stereo-mini

plug

Audio device (Portable

audio player, etc.)

NOTE

• Before connecting, turn off the power of both this

instrument and the external audio device. Also,

before turning the power on or off, make sure to set

all volume levels to minimum (0). Otherwise, damage

to the devices, electrical shock, or even permanent

hearing loss may occur.

• After connecting, first turn on the power to the exter-

nal audio device then to this instrument. Reverse this

order when you turn the power off.

Using the Melody Suppressor

• Depending on the particular music source, the melody

or vocal sound may not be cancelled as expected even

if the Melody Suppressor is turned on.

CAUTION

NOTICE

Indication is shown when this

function is turned on.

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Recording Your Performance

You can record up to 10 of your performances as User Songs. The recorded User

Songs can be played back on the instrument.

 Melody Tracks [1]–[5]

The melody performance of the keyboard will be

recorded.

 Accompaniment Track [A]

The chord progression (for the Style) or the key

change (for the Pattern) will be recorded.

The operation is useful when you record a new Song

from scratch.

Make the desired settings including the

Main Voice selection.

Make the desired settings of your perfor-

mance.

• If you want to record only the melody performance, press

the [SONG] button.

• If you want to record the performance using a Style, press

the [Style] button.

• If you want to record the performance using a Pattern,

press the [Pattern] button.

Press the [REC] button to enter the

Record Ready mode.

If a User Song was not selected beforehand, this

operation selects the lowest-numbered unrecorded

User Song (from 031–040) as Recording target.

To exit from this status, press the [REC] button

again.

Start recording.

• When you press the [SONG] button in Step 2, play any note

to start recording.

• When you select a Style in Step 2, play a chord in the Auto

Accompaniment area to start recording with Style play-

back, or press the [START/STOP] button to start recording

only with playback of the Rhythm part of a Style.

• When you select a Pattern in Step 2, play a key in the

Accompaniment area or press the [START/STOP] button to

start recording with Pattern playback.

The current measure will be shown on the display

while recording.

Press the [START/STOP] or [REC] button

to stop recording.

When using a Style, you can stop recording also

by pressing the [ENDING] button then waiting

until playback ends.

After recording finishes, “Writing!” appears indi-

cating that the recorded data will be stored, then

the recorded track numbers in the display will

light.

To play back the recorded Song, press

the [START/STOP] button.

• About audio files

The Recording function of this instrument will record your keyboard performance as MIDI data. Note that audio recording is not avail-

able.

NOTE

Track Structure of a Song

Quick Recording

Tr a ck

Trac k

Tr a ck

Trac k

Accompaniment

Tr a c k

User 1

001

pEC

Flashes

• The ACMP on/off status cannot be changed after the

[REC] button is pressed.

• Never attempt to turn the power off when “Writing!” is

shown in the display. Doing so can damage the flash

memory and result in a loss of data.

•

When recording Pattern playback with Retrigger

Note that the beat indicator in the display, metronome

and Arpeggio playback is not synchronized with play-

back of the recorded Song.

NOTE

User 1

003

pEC

Current measure number

NOTICE

NOTE

Recording Your Performance

PSR-E443 Owner’s Manual

Quick Guide

The operation here is useful especially when you want

to record the additional performances to an already

recorded Song.

Press the [SONG] button, then select the

desired User Song (031–040) as the

recording target.

While holding down the [REC] button,

press the desired Track button to enter

the Record Ready mode.

 If you want to record only the melody:

While holding down the [REC] button, press

one of the [1]–[5] buttons.

 If you want to record only the Style play-

back:

Press the [STYLE] button, select the desired

Style, then simultaneously hold down the

[REC] button and press the [6/A] button.

ACMP is automatically turned on.

 If you want to record only the Pattern

playback:

Press the [Pattern] button, then select the

desired Pattern. While holding down the [REC]

button, press the [6/A] button. ACMP is auto-

matically turned on.

Same as in Steps 4 to 6 (page 30) in

“Quick Recording.”

Recording to a Specified Track

User 1

031

Song number

User 1

001

pEC

Track 1 will

flash

Press and

hold

User 1

001

pEC

Press and

hold

• If the memory becomes full while recording, an alert

message will appear and recording will stop automati-

cally. In this case, delete unnecessary data by using the

Clear functions (page 32), then execute the recording

again.

Limitations while recording

• The on/off status of ACMP cannot be changed.

• Playback cannot be changed between Style and

Pattern.

• The Pattern number can be changed while the

Style number cannot.

• When you use a Style/Pattern, the following

parameters cannot be changed: Reverb Type,

Chorus Type, Time Signature, Style number and

Style/Pattern Volume.

• Performance with a Split Voice cannot be

recorded.

• The sound of an external audio device (page 29)

cannot be recorded.

User 1

001

pEC

Press and

hold

NOTE

Recording Your Performance

PSR-E443 Owner’s Manual

Quick Guide

You can clear all tracks of a User Song.

Press the [SONG] button, then select the

User Song (031–040) to be cleared.

Hold down the track [6/A] and [1] but-

tons simultaneously for longer than a

second.

A confirmation message will appear on the dis-

play.

Press the [+/YES] button.

A confirmation message will appear on the dis-

play. To cancel this operation, press the [-] button.

Press the [+/YES] button to clear the

Song.

A clear-in-progress message will appear briefly on

the display.

This lets you clear individual tracks from a User Song.

Press the [SONG] button, then select the

desired User Song (031–040).

From [1]–[5] and [6/A], press the Track

button to be cleared for longer than a

second.

A confirmation message will appear on the dis-

play.

Press the [+/YES] button.

A confirmation message will appear on the dis-

play.To cancel this operation, press the [-] button.

Press the [+/YES] button to clear the

track.

A clear-in-progress message will appear briefly on

the display.

Clearing a User Song

ClrUser1

YES

Clearing a Specified Track from

a User Song

Hold for longer than

a second.

ClrTr1

YES

PSR-E443 Owner’s Manual

Quick Guide

Memorizing Your Favorite Panel Settings

This instrument has a Registration Memory

feature that lets you memorize your favorite

settings for easy recall whenever they’re

needed. Up to 32 complete setups can be

saved (eight banks of four setups each).

Make the desired settings such as those

for Voice, Style, and Pattern.

Press and release the [MEMORY/BANK]

button to call up a Bank number on the

display.

Use the dial or the [1]–[8] number but-

tons to select a Bank number.

While holding down the [MEMORY/

BANK] button, press one of the [1]–[4]

buttons to memorize the current panel

settings.

Press and release the [MEMORY/BANK]

button to call up a Bank number on the

display.

Use the dial or the [1]–[8] number but-

tons to select a Bank number.

Press one of the [1]–[4] buttons to call

up the panel settings you memorized.

The recalled REGIST MEMORY number appears

in the display for a few seconds.

Up to 32 presets (eight banks of four each) can

be memorized.

Memory 1

8 Banks

Memory 2 Memory 3 Memory 4

Memorizing Panel Settings to

the Registration Memory

• Data cannot be saved to the Registration Memory during

Song playback.

• If you select a Registration Memory number that

already contains data, the previous data is deleted

and overwritten by the new data.

• Do not turn off the power while memorizing settings

to the Registration Memory, otherwise the data may

be damaged or lost.

Bank

Bank number

NOTE

Writing!

Press and

hold

NOTICE

Recalling Panel Settings from

the Registration Memory

• When the [SONG] lamp is lit, the Style or Pattern settings

will not be recalled even if you press the Registration

Memory button to which the Style or Pattern settings are

memorized. To recall Style/Pattern settings, make sure to

press the [STYLE] or [PATTERN] button.

Parameters that can be memorized to Reg-

istration Memory

 Style settings

Style number, ACMP on/off, Style volume, Track on/off

 Pattern settings

Pattern number, Pattern volume, Section, Track on/off

 Voice settings

Main Voice settings: Voice number and all settings of the

related Functions

Dual Voice settings: Dual on/off and all settings of the

related Functions

Split Voice settings: Split on/off and all settings of the

related Functions

 Effect settings

Reverb Type, Chorus Type

 Arpeggio settings

Arpeggio on/off and all settings of the related Functions

 Harmony settings

Harmony on/off and all settings of the related Functions

 Other settings

Transpose, Pitch Bend Range, Knob Effect Combination

number, Split Point, Tempo, Scale Tune

REGIST 1

NOTE

PSR-E443 Owner’s Manual

Quick Guide

Using with a Computer or iPad/iPhone

This instrument supports MIDI (Musical Instrument

Digital Interface) and can transmit/receive keyboard

performance information (MIDI messages) or Song/

Style data (MIDI files) to/from the computer con-

nected via a USB cable. For details on using a com-

puter with this instrument, refer to the “Computer-

related Operations” (page 9) on the website.

By connecting your iPad/iPhone to the instrument,

you can take advantage of various functions. To make

connections, prepare the optional i-UX1, then refer to

the “iPhone/iPad Connection Manual” (page 9) on the

website.

Backup and Initialization

The following Backup parameters will be maintained

even if the power is turned off.

In addition to the Backup parameters above, all the data

(including Style data that have not been loaded) trans-

ferred from the connected computer will be maintained

even if you turn off the power.

This function erases the Backup data described above,

and then restores all the default factory settings.

You can initialize your original data via the following

two methods.

Backup Clear

This operation initializes the backup parameters.

While holding down the highest white key, press the

[ ] (Standby/On) switch to turn the power on.

Flash Clear

This operation deletes all the Songs and Styles that have

been transferred from a computer. Note that Style data

registered to Style numbers 201–205 will be maintained.

While simultaneously holding the highest white key and

the three highest black keys, press the [ ] (Standby/

On) switch to turn the power on.

Connecting to a computer

• If you transfer the Style file from the computer to this instru-

ment, you need to register it to this instrument for Style play-

back. For details, refer to “Loading a Style File” (page 61).

USB cable

USB terminal

instrumentcomputer

USB terminal

NOTE

Data that can be transferred from a computer to

this instrument (and vice versa).

• Song: (.mid) SMF format 0/1

• Style: (.sty)

• Backup File: PSR-E443.BUP *

* Backup parameters can be transferred and saved to a com-

puter via Musicsoft Downloader as a single Backup file.

Connecting an iPad/iPhone

• This instrument can transfer/load up to a maximum of 256

Song files.

NOTE

About audio files

Audio signals created via your keyboard performance cannot be transferred to a computer or iPad/iPhone even if such a device

is connected to the USB [TO HOST] terminal of this instrument. This means that your keyboard performance, SONG/STYLE/

PATTERN cannot be recorded to a computer or iPad/iPhone as audio data.

Backup Parameters

Backup parameters

• User Songs (page 30)

• Style data transferred from a computer and loaded to

Style numbers 201–205 (page 61)

• Registration Memory (page 33)

• FUNCTION Settings: (page 52)

Tuning, Split Point, Touch Response, Style Volume,

Song Volume, Pattern Volume, Metronome Volume,

Grade, Demo Group, Demo Play Mode, Demo Can-

cel, Master EQ type, Your Tempo on/off, Auto

Power Off setting, Battery Select, Language

Initialization

• Keep in mind that this operation also deletes the data you

have purchased. Be sure to save the important data to a

computer via Musicsoft Downloader (MSD) software. For

details, refer to “Computer-related Operations” (page 9).

NOTICE

PSR-E443 Owner’s Manual

Reference

Handy Performance Features

Selecting a Reverb Type

The Reverb effect lets you play with a rich concert

hall type ambience.

Although selecting a Style or Song will call up the

optimum Reverb type for the entire sound, you can

select a different Reverb type manually.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “Reverb” (Function 035).

After “Reverb” is shown for a few seconds, the

current Reverb Type is shown.

Rotate the dial to select a Reverb type.

Play the keyboard to check the sound. For infor-

mation about the available Reverb types, refer to

the Effect Type List in the Data List (page 9).

Selecting a Chorus Type

The Chorus effect creates a thick sound that is similar

to many of the same Voices being played in unison.

Although selecting a Style or Song will call up the

optimum Chorus type for the entire sound, you can

select a different Chorus type manually.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “Chorus” (Function 036).

After “Chorus” is shown for a few seconds, the

current Chorus Type is shown.

Rotate the dial to select a Chorus type.

Play the keyboard to check the sound. For infor-

mation about the available Chorus types, refer to

the Effect Type List in the Data List (page 9).

• Some Songs and Styles use Reverb Types which cannot

be selected via panel operation. If such a Song or Style

is played back, “- - -” is shown on the display.

Adjusting the Reverb depth

You can adjust the Reverb depth applied to the

Main, Dual, and Split Voices individually via

the same operations above. Regarding the

item in Step 2, refer to the Function List on

page 52.

Hall2

035

Reverb

035

Current Reverb type

NOTE

• Some Songs and Styles use Chorus Types which cannot

be selected via panel operation. If such a Song or Style

is played back, “- - -” is shown on the display.

Adjusting the Chorus depth

You can adjust the Chorus depth applied to the

Main, Dual, and Split Voices individually via

the same operations above. Regarding the

item in Step 2, refer to the Function List on

page 52.

Chorus

036

Chorus1

036

Current Chorus type

NOTE

Reference

Handy Performance Features

PSR-E443 Owner’s Manual

Reference

Pitch Controls—Transpose

The overall pitch of the instrument (except for the

Drum Kit Voices) can be shifted up or down by a max-

imum of 1 octave in semitone increments.

Press the [TRANSPOSE] button to call

up “Transpos” (Function 005).

Use the dial to set the Transpose value

between -12 and +12.

Pitch Controls—Fine Tuning

The overall tuning of the instrument (except for the

Drum Kit Voices) can be shifted up or down between

427.0 Hz and 453.0 Hz in approximately 0.2 Hz incre-

ments. The default value is 440.0 Hz.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “Tuning” (Function 006).

Use the dial to set the Tuning value.

Pitch Controls—the PITCH

BEND wheel

The PITCH BEND wheel can be used to add smooth

pitch variations to notes you play on the keyboard.

Roll the wheel upward to raise the pitch, or downward

to lower the pitch.

You can change the amount of pitch bend produced by

the wheel. Refer to “Pitch Bend Range” in the Func-

tion List (page 52).

Calling Up Optimum Panel Set-

tings—One Touch Setting (OTS)

Select Voice number “000 OTS.” This lets you auto-

matically call up the optimum Voice or Tempo for the

current Song, Style or Pattern.

Transpos

005

Tuning

006

440.0Hz

006

Handy Performance Features

PSR-E443 Owner’s Manual

Reference

Changing the Touch Response of

the Keyboard

The keyboard of this instrument is equipped with a

Touch Response feature that lets you dynamically and

expressively control the level of the Voices according

to your playing strength.

Press the [FUNCTION] button.

Press the CATEGORY [+] or [-] button

several times until “TouchRes” (Func-

tion 009) appears.

“TouchRes” is shown in the display for a few sec-

onds, and the current Touch Response is shown.

Use the dial to select a Touch Response

setting between 1 and 4.

When “1”–“3” is selected, higher values produce

greater (easier) volume variation in response to

keyboard dynamics—i.e. greater sensitivity. When

“4” (Fixed) is selected, all notes will be played at

the same volume no matter how strongly or softly

you play the keys.

Selecting an EQ Setting for the

Best Sound

Six different master equalizer (EQ) settings give you

the best possible sound when listening through differ-

ent reproduction systems—the instrument’s internal

speakers, headphones, or an external speaker system.

Hold down the [MELODY SUPPRESSOR]

button for longer than a second to call

up “Master EQ” (Function 037).

“MasterEQ” is shown in the display for a few sec-

onds, and the current Master EQ type appears.

Rotate the dial to select the desired Mas-

ter EQ type.

Master EQ types

• The initial default Touch Response value is “2.”

TouchRes

009

Medium

009

Current Touch

Response

NOTE

1 Speaker

Optimum for listening via the instru-

ment’s built-in speakers.

2 Headphone

Optimum for headphones, or for listen-

ing via external speakers.

3 Boost Features more powerful sound.

4 Piano Optimum for piano solo performance.

5Bright

Lowers the mid range for a brighter

sound.

6 Mild

Lowers the high range for a softer

sound.

MasterEQ

037

Speaker

037

Hold for longer

than a second.

Current Master

EQ type

PSR-E443 Owner’s Manual

Reference

Scale Tuning

By default, this keyboard scale is set to Equal Temperament — the same tuning as with

any acoustic piano. However, the setting can be changed to any other scale according

to the music genre or music style you want to play.

Selecting Scale

You can select a desired scale among the various pre-

set scales.

Press the [FUNCTION] button.

Use the CATEGORY [+] or [-] button to

call up “Scale” (Function 045).

Rotate the dial to select a scale.

The default setting is “1 Equal.”

Preset Scale types

Setting the Base Note for Each

Scale

Please make sure to specify the appropriate Base

Note, if you select a scale other than Equal Tempera-

ment, or create an original scale via Scale Tune func-

tion.

Press the [FUNCTION] button.

Use the CATEGORY [+] or [-] button to

call up “BaseNote” (Function 046).

Rotate the dial to select a Base Note

from C, C#, D, Eb, E, F, F#, G, Ab, A, Bb

and B.

The default setting is “C.”

1 Equal

2 Pure Major

3 Pure Minor

4 Bayat (Arabic)

5Rast (Arabic)

Scale

045

Equal

045

Current Scale

BaseNote

046

Current Base Note

Scale Tuning

PSR-E443 Owner’s Manual

Reference

Tuning Each Note to Create an

Original Scale

You can tune the individual notes in cents (a “cent” is

one one-hundredth of a semitone.) to create your orig-

inal scale.

Select the Base Note following the “Set-

ting the Base Note for Each Scale”

instructions (page 38).

Use the CATEGORY [+] or [-] button to

call up the individual notes to be tuned,

such as “Tune C” (Function 047) as

shown.

You can choose the note to be tuned from among

the 12 notes below.

“C ”(Function 047), “C#”(048), “D”(049),

“Eb”(050), “E”(051), “F”(052), “F# ”(053),

“G”(054), “Ab”(055), “A”(056), “Bb”(057),

“B”(058)

Rotate the dial to tune the note selected

in step 2.

The tuning range is from -64 to +63.

The setting can be reset to the initial default value

by pressing the [+/YES] and [-/NO] buttons

simultaneously.

Repeat steps 2–3 as desired.

Memorize the settings here to the Regis-

tration Memory as desired (page 33).

• When pressing the [+/YES] and [-/NO] buttons simulta-

neously after recalling an original scale memorized to

Registration Memory, the scale will return to the original

scale registered to Registration Memory, not to the

default tune value.

• When calling up “Scale (Function 045)” after using indi-

vidual note scale tuning, “(Edited)” will be shown in the

display. However, the edited scale settings will be

erased by calling up another scale. For this reason, the

edited settings should be memorized to the Registration

Memory.

Tune C

047

NOTE

PSR-E443 Owner’s Manual

Reference

Voice Settings

Selecting a Dual Voice

Hold down the [DUAL] button for longer

than a second to call up “D.Voice.”

“D.VOICE” is shown for a few seconds, then the

current Dual Voice appears.

Rotate the dial to select the desired Dual

Voice .

Selecting a Split Voice

Hold down the [SPLIT] button for longer

than a second to call up “S.Voice.”

“S.VOICE” is shown for a few seconds, then the

current Split Voice appears.

Rotate the dial to select the desired Split

Voice .

Voice Editing

For each of the Main, Dual and Split Voices, you can

edit the parameters such as volume, octave and depth

of the Reverb and Chorus, allowing you to create new,

custom sounds that best suit your musical needs.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up the desired item.

Voice parameters are indicated as below.

• Main Voice parameters: M.****** (Function

010–018)

• Dual Voice parameters: D.****** (Function

019–028)

• Split Voice parameters: S.****** (Function

029–034)

For information about each parameter, refer to the

Function List on page 53.

Rotate the dial to set the value.

Check the sound by playing the keyboard.

Repeat Steps 2–3 above to edit various

parameters.

If necessary, memorize the settings to

the Registration Memory (page 33).

The Voice-related settings are reset when a differ-

ent Voice is selected. If you want to store the cre-

ated sound for future recall, memorize the settings

to the Registration Memory.

D.Voice

019

Syn.Str

077

019

Current Dual Voice

S.Voice

029

FngrBass

053

029

Current Split Voice

M.Volume

064

010

PSR-E443 Owner’s Manual

Reference

Parameters Assigned to the Knobs

This section describes each of the parameters which can be assigned to the Knobs (page 22).

z FILTER

Filter effects shape the sound by allowing only a spec-

ified range of frequencies to pass and/or by producing

a resonance peak at the filter’s “cutoff” frequency. Fil-

ter effects can be used to create a range of synthesizer-

like sounds.

 Knob A: CUTOFF

Adjusts the filter’s cutoff frequency, and therefore the

brightness of the sound. Turning the Knob to the left

makes the sound more muffled or darker, while turn-

ing the Knob A to the right makes the sound brighter.

 Knob B: RESONANCE

Adjusts the amount of Resonance applied at the fil-

ter’s cutoff frequency. Turning the Knob to the right

will increases the Resonance to emphasize the fre-

quencies at the cutoff frequency, and thus “strength-

ens” the perceived effect of the filter.

x EFFECT



Knob A: REVERB

Reproduces the acoustic ambience of a concert hall or

club. Turning the Knob to the right will increase the

Reverb depth.

 Knob B: CHORUS

Produces a layered “multi-instrument” effect. Turning

the Knob to the right will increase the Chorus depth.

c EG (Envelope Generator)

Envelope Generator effects determine how the level of

the sound varies over time. You can make the attack

faster for a more percussive sound or slower for a vio-

lin-like sound, for example. Or you can lengthen or

shorten the sustain to best match the music you’re

playing.

 Knob A: ATTACK

Adjusts the Attack Time (the amount of time it takes

the sound to reach maximum level when a key is

played). Turning the Knob to the right will increase

the Attack Time, thus slowing down the attack rate.

 Knob B: RELEASE

Adjusts the Release Time (the amount of time it takes

for the sound to decay to silence after a key is

released). Turning the Knob to the right will increase

the Release Time, thus make a longer sustain.

v STYLE FILTER

Same as “ z FILTER.” These effects are applied only

to Style or Pattern playback.

b AUX IN

These knobs can be used when playing an external

audio device connected to the [AUX IN] jack of this

instrument.

 Knob A: SUPPRESSOR PAN

Turn on the Melody Suppressor, then rotate this knob

to move the pan position to be cancelled.

 Knob B: BALANCE

Adjusts the volume balance between the audio device

and this instrument. Turning the knob left will

decrease the volume of the audio device and increase

the volume of this instrument, and vice versa. Even if

an external audio device is not connected, rotating this

• These effects are applied only to the Main/Dual Voices played

on the keyboard.

• Filter effects can sometimes cause distortion in the bass fre-

quencies.

• These effects are applied only to the Main/Dual Voices played

on the keyboard.

NOTE

Level

Frequency

Cutoff Frequency

Frequencies in this

range are passed.

Frequencies in this

range are cut off.

Level

Frequency

Resonance

NOTE

• These effects are applied only to the Main/Dual Voices played

on the keyboard.

AT TAC K

RELEASE

DECAY

Sustain Level

Level

Time

Key Played Key Released

NOTE

Parameters Assigned to the Knobs

PSR-E443 Owner’s Manual

Reference

knob will increase/decrease the volume of the Song/

Style/Pattern playback sound, maintaining the key-

board performance volume.

n SPECIAL EFFECT



Knob A: ULTRA WIDE STEREO

Lets you play the keyboard with a spacious, dynamic

sound effect that gives you the sensation of hearing

the sound outside of the speakers. By changing the

wide effect type in the Function settings (page 53,

Function 038), you can enhance the stereo image in

different ways.

 Knob B: RETRIGGER RATE

While holding down the button of the currently play-

ing Section, rotating this knob will change the Retrig-

ger Rate (the length of the part to be repeated).

Turning right will shorten the length, and vice versa.

The chart below lists some interesting ways to use the various effects that can be assigned to the knobs.

Some Ideas for Using the Knobs

Number/Effect Try This

FILTER

Select “140 Gemini” (a synth-lead type Voice) or “167 Noise.” (Refer to the

Voice List of the separate Data List). Turning Knobs A or B while playing

gives you the dynamic filter-sweep effects of an analog synthesizer.

EFFECT

Select the Voice “008 CP80.” Turn Knobs A and B all the way down to hear

the direct, unprocessed sound of the Voice. As you turn Knob B toward the

right, a Chorus effect with modulation is gradually applied to the sound. Turn-

ing Knob A to the right adds a Reverb effect that makes you sound like you

are playing in a concert hall.

Select the Voice “170 RsAnPad.” Turning Knob A all the way down makes

the attack faster, and lets you hear the crisp, clear sound of the original Voice.

Turning Knob B all the way down shortens the amount of time for the sound

to decay to silence after a key is released. These knobs let you finely adjust

the Voice to create the appropriate sound for the particular song you’re play-

ing.

STYLE FILTER

Select the Style, “049 EuTrance”. Turn accompaniment on and start Style

playback (page 23). Set Knob B to about 3 o’clock, and Knob A to about 8

o’clock. The overall sound of the style should be a bit muffled, with the drums

emphasized for solid rhythmic impact.

AUX IN

Knob A: SUPPRES-

SOR PAN

Turn these knobs when playing back an external audio device such as iPhone,

iPod etc. by connecting it to the [AUX IN] jack of this instrument (page 29).

Turn Melody Suppressor on, then turn Knob A to adjust the pan position of

the melody sound of an external audio device to be cancelled (lowered).

When you can cancel (lower) the melody part, try playing the part yourself.

Turning Knob B adjusts the volume balance between an external audio device

and this instrument.

Knob B: BALANCE

SPECIAL

EFFECT

Knob A: ULTRA-

WIDE STEREO

This lets you create various sounds from simulated mono to wider stereo,

even when playing only a single Voice (Grand Piano, Octave Strings, etc.).

Knob B: RETRIG-

GER RATE

Select the Section C of the Pattern “001 FrenchDJ” and start Pattern playback.

Turn this knob to the right while holding down the Section button C, and you

can shorter the Retrigger rate like a DJ plays.

PSR-E443 Owner’s Manual

Reference

Arpeggio Settings

Synchronizing an Arpeggio to

Song/Style/Pattern Play-

back—Arpeggio Quantize

When you play the keyboard to trigger an Arpeggio

(page 21) along with Song/Style/Pattern playback,

you’ll need to play the notes with correct timing to

keep the Arpeggio in synchronization with the other

playback tracks. However, your actual timing may be

slightly ahead of or behind the beat (or both). The

“Arpeggio Quantize” function of this instrument will

correct any slight imperfections in the timing (accord-

ing to settings below), and then play back the Arpeg-

gio appropriately.

• Synchronizing at the quarter notes

• Synchronizing at the 8th notes

• No synchronization

Although the Arpeggio Quantize value is pre-pro-

grammed for each Arpeggio Type, you can change the

value manually.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “Quantize” (Function 043).

After “Quantize” is shown for a few seconds, the

current Arpeggio Quantize value is shown.

Rotate the dial to select a value from

“OFF,” “1/8” and “1/16.”

• 1/8 Synchronizing at the quarter notes

• 1/16 Synchronizing at the 8th notes

• OFF No synchronization

Holding the Arpeggio Playback

via the Footswitch

You can set the instrument so that Arpeggio playback

continues even after the note has been released, by

pressing the footswitch connected to the [SUSTAIN]

jack.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “Pdl Func” (Function 044).

After “Pdl Func” is shown for a few seconds, the

current setting is shown.

Rotate the dial to select “Arp Hold.”

If you want to restore the footswitch function to

sustain, select “Sustain.” If you want to use both

hold and sustain functions, select “Hold+Sus.”

Try playing Arpeggio with the foot-

switch.

Press the notes to trigger the Arpeggio, then press

the footswitch. Even if you release the notes,

Arpeggio playback will continue. To stop Arpeg-

gio playback, release the footswitch.

Quantize

043

1/8

043

Current value

Pdl Func

044

Sustain

044

Current setting

Arp Hold

044

PSR-E443 Owner’s Manual

Reference

Styles (Auto Accompaniment) and Patterns

Style Variations—Sections

Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the song

you are playing.

INTRO

This is used for the beginning of the Song. When the Intro finishes, Style playback shifts to the Main section.

The length of the Intro (in measures) differs depending on the selected Style.

MAIN

This is used for playing the main part of the Song. Playback of the Main section repeats indefinitely until

another Section’s button is pressed. There are two variations (A and B), and the Style playback sound changes

harmonically in response on the chords you play with your left hand.

AUTO FILL

This is automatically added before changing to Main A or B.

ENDING

This is used for the ending of the Song. When the Ending finishes, the Style playback stops automatically. The

length of the Ending (in measures) differs depending on the selected Style.

Press the [STYLE] button, then rotate

the dial to select a Style.

Press the [ACMP ON/OFF] button to turn

ACMP on.

Press the [SYNC START] button to turn

Synchro Start on.



Synchro Start

When the Synchro Start is on, Style playback will

begin as soon as you play a chord in the accompa-

niment range of the keyboard. To turn off the Syn-

chro Start, press the [SYNC START] button.

Press the [MAIN/AUTO FILL] button to

select Main A or Main B.

INTRO MAIN A/B

ENDING AUTO FILL

Appears when ACMP

is turned on.

Beat arrows flash.

MAIN A

Current Section

Styles (Auto Accompaniment) and Patterns

PSR-E443 Owner’s Manual

Reference

Press the [INTRO/ENDING/rit.] button.

Now, you’re ready to start Style playback from the

Intro section.

Play a chord with your left hand to start

playback of the Intro.

For this example, play a C major chord (as shown

below). For information on how to enter chords,

see “Chords” on page 48.

After the Intro finishes, play the key-

board according to the progression of

the Song you are playing.

Play chords with your left hand while playing

melodies with your right hand, and press the

[MAIN/AUTO FILL] button as necessary. The

Section will change to Fill-in then Main A or B.

Press the [INTRO/ENDING/rit.] button.

The Section switches to the Ending. When the

Ending is finished, Style playback stops automati-

cally. You can have the Ending gradually slow

down (ritardando) by pressing the [INTRO/END-

ING/rit.] button again while the Ending is playing

back.

Synchro Stop

When you press the [SYNC/STOP] button to turn on

this function, the Style will only play while pressing

chords in the Accompaniment range of the keyboard.

Releasing all the notes will stop Style playback. This

makes it easy to add rhythmic breaks as you perform,

simply by releasing your hand from the Accompani-

ment range of the keyboard.

Tur n i n g Each Tra ck O f St y l e

On/Off

As printed on the front panel, a Style consists of six

tracks. Turn on/off each track via the [TRACK CON-

TROL] button. Each of the tracks can be muted so that

you can play the muted part yourself. Pressing the

desired Track button repeatedly will toggle the on/off

status.

INTRO≥A

Split Point

Accompani-

ment range

FILL A≥B

ENDING

• Up to two Track buttons can be pressed simultaneously for

turning Tracks on or off.

Appears when the

synchro-stop function

is engaged.

The style will play

while you are playing

the keys

Style playback will

stop when you

release the keys

On/off status is shown in

the display (page 16)

NOTE

Styles (Auto Accompaniment) and Patterns

PSR-E443 Owner’s Manual

Reference

Pattern Variations—Sections

Like the Styles, each Pattern features several Sections,

allowing you to add dynamic variations to the perfor-

mance. Five Sections (A–E) are provided.

Unlike the Styles, however, Patterns do not have the

Sections dedicated to the beginning or ending of the

Song, such as Intro and Ending. All Sections A–E will

play back repeatedly until stopped manually.

Pattern Retrigger Function

This function restarts Pattern playback from the

beginning.

Press the [PATTERN] button, then rotate

the dial to select the desired Pattern.

Press the [START/STOP] button or press

any key to the left of the Split Point

(page 47) to start Pattern playback.

By pressing the button of the currently

playing Section, you can restart play-

back from the beginning. Holding down

the button lets loop-play only the top

portion of the Section.

The top portion length (Retrigger rate) can be

changed during playback. To do this, use the

[ASSIGN] button to select “6 SPECIAL

EFFECT,” then rotate Knob B while holding down

the button of the currently playing Section.

Changing the Tempo

A Style or Pattern can be played at any tempo you

desire—fast or slow.

Press the [TEMPO/TAP] button to call up

the Tempo value in the display.

Rotate the dial to set a tempo from 011 to

280.

Press the [+/YES] and [-/NO] buttons simultane-

ously to instantly reset the value to the default

tempo of the current Style or Pattern. You can

change the tempo during playback by pressing the

[TEMPO/TAP] button just twice at the required

tempo.

Tap Sta r t

You can start play back of the Style, Pattern or Song

by simply tapping the [TEMPO/TAP] button at the

required tempo—four times for time signatures in 4

(4/4, etc.), and three times for time signatures in 3 (3/

4, etc.).

• When recording the Pattern playback with the Retrigger, note

that the beat indicator in the display, metronome and Arpeg-

gio playback is not synchronized with playback of the

recorded Song.

• When setting the tempo of the Pattern playback to more than

200, turning the Knob to the right cannot change the length

from the 1st beat of 1st measure.

• The above operation applies also to Song or Arpeggio

playback tempo.

• Tap tempo setting range: 32–280

NOTE

Tempo

090

Current Tempo value

NOTE

Styles (Auto Accompaniment) and Patterns

PSR-E443 Owner’s Manual

Reference

Adjusting the Volume of the Style

or Pattern

You can adjust the volume balance between Style or

Pattern playback and keyboard performance.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “StyleVol” (Function 001) or

“PatrnVol” (Function 003).

Rotate the dial to set the volume

between 000 and 127.

Setting the Split Point

The point on the keyboard that separates the left-hand

range and the right-hand range of the keyboard is

called the “Split Point.”

The initial default Split Point is key number 054 (the

F#2 key), but you can change it to another key.

Press the [FUNCTION] button.

Use the CATEGORY [+] and [-] buttons to

call up “SplitPnt” (Function 008).

You can call up this display also by pressing the

[STYLE] then holding the [ACMP] button for lon-

ger than a second.

Rotate the dial to set the Split Point

between 036 (C1) and 096 (C6).

Playing Chords Without Style

Playback

If you press the [STYLE] button, press the [ACMP

ON/OFF] button to turn ACMP on (the ACMP ON

icon appears), and play the chord in the Left hand

range of the keyboard (with SYNC START off), the

chord sound will be heard without Style playback.

This is referred to as “Stop Accompaniment.” The

specified chord will be shown in the display, and

affects the Harmony function (page 20).

StyleVol

100

001

SplitPnt

054

008

Split Point

• When a Style is selected and ACMP is on, the notes

played to the left of the Split Point are used to specify the

chord for Style playback. When a Pattern is selected, the

note played to the left of the Split Point is used to specify

the key for Pattern playback.

• The Split Point set here is applied common to the Style,

Pattern and Voice.

• During the Lesson playback, the Split Point cannot be

changed.

Split voice

Main voice and dual voice

Split Point ... default value: 054 (F#2)

036

(C1)

048

(C2)

060

(C3)

072

(C4)

084

(C5)

096

(C6)

NOTE

PopBossa

114

Appears when auto accompaniment is on

Accompani-

ment range

Styles (Auto Accompaniment) and Patterns

PSR-E443 Owner’s Manual

Reference

Chord Types for Style Playback

For users who are new to chords, this chart features common chords. Since there are many useful chords and

many different ways to use them musically, refer to commercially available chord books for further details.

 indicates the root note.

• Inversions can be used as well as in “root” position—with the following exceptions:

m7, m7

5, 6, m6, sus4, aug, dim7, 7

5, 6(9), sus2

• Inversion of the 7sus4 and m7(11) chords are not recognized if the notes are omitted.

• When playing a chord which cannot be recognized by this instrument, nothing is shown

on the display. In such a case, only the rhythm and bass parts will be played.

Major Minor Seventh Minor Seventh Major Seventh

Easy Chords

This method lets you easily play chords in the accompaniment range of the keyboard using only one, two, or three

fingers.

For root “C”

To play a major chord

Press the root note ()

of the chord.

To play a minor chord

Press the root note

together with the nearest

black key to the left of it.

To play a seventh chord

Press the root note

together with the nearest

white key to the left of it.

To play a minor seventh chord

Press the root note together

with the nearest white and

black keys to the left of it (three

keys altogether).

Styles (Auto Accompaniment) and Patterns

PSR-E443 Owner’s Manual

Reference

Looking Up Chords Using the

Chord Dictionary

The Dictionary function is useful when you know the

name of a certain chord and want to quickly learn how

to play it.

Press and hold the [CHORD DICT] button

for longer than a second to call up “Dict.”

This operation will divide the entire keyboard into

the three ranges as illustrated below.

• The range to the right of “ROOT ”:

Lets you specify the Chord Root, but produces no

sound.

• The range between “CHORD TYPE ” and

“ROOT ”:

Lets you specify the Chord Type, but produces no

sound.

• The range to the left of “CHORD TYPE ”:

Lets you play and confirm the Chord specified in

the above two ranges.

As an example, learn how to play a GM7

(G major seventh) chord.

2-1.

Press the “G” key in the section to the right

of “ROOT ” so that the “G” is shown as

the root note.

2-2.

Press the key labeled “M7” in the section

between “CHORD TYPE ” and “ROOT.”

The notes you should play for the specified

chord (root note and chord type) are conve-

niently shown in the display, both as nota-

tion and in the keyboard diagram.

To call up possible inversions of the chord, press

the [+/YES]/[-/NO] buttons.

Following the notation and keyboard

diagram in the display, try playing a

chord in the range to the left of “CHORD

TYPE .”

When you’ve played the chord properly, a bell

sound signals your success and the chord name in

the display flashes.

Dict.

Hold for longer than

a second.

Chord Type range Root range

Keyboard

playing range

The

highest

key

Dict.

001

• About major chords: Simple major chords are usually

indicated only by the root note. For example, “C” refers

to C major. However, when specifying major chords

here, make sure to select “M” (major) after pressing the

root note.

Specifying only the key for Pattern

playback

Note that you need to specify only the root

note for Pattern playback, unlike Style play-

back for which you also need to specify the

Chord Type.

Individual notes of

chord (keyboard)

Chord name (root and type)Notation of chord

Dict.

001

NOTE

PSR-E443 Owner’s Manual

Reference

Song Settings

BGM (Background Music) Play-

back

With the default setting, pressing the [DEMO/BGM]

button will play back only a few of the internal Songs

repeatedly. This setting can be changed so that, for

example, all internal Songs are played, or all Songs

transferred to the instrument from a computer are

played back, letting you use the instrument as a back-

ground music source. Five playback group settings are

provided. Simply select the one that suits your needs.

Hold down the [DEMO/BGM] button for

longer than a second.

“DemoGrp” is shown in the display for a few sec-

onds, followed by the current repeat playback tar-

get.

Rotate the dial to select a repeat play-

back group from the table below.

Press the [DEMO] button to start play-

back.

To stop playback, press the [DEMO] button again.

Random Song Playback

The order of Song repeat playback via the [DEMO/

BGM] button can be changed between the numerical

order and random order.

Press the [FUNCTION] button.

Press the CATEGORY [+] and [-] buttons

several times to call up “PlayMode”

(Function 074).

“PlayMode” is shown for a few seconds, followed

by the current playback mode, “Normal” or “Ran-

dom.”

When the DemoGrp is set to “Demo,” this param-

eter cannot be set.

Rotate the dial to select “Random.”

To return to the numerical order, select “Normal.”

Press the [DEMO] button to start play-

back.

To stop playback, press the [DEMO] button again.

Demo Preset Songs 001–003

Preset All preset Songs

User All User Songs

Download All Songs transferred from a computer

USB

All Songs (MIDI files) in the connected USB

flash memory

• When User Songs, Download Songs and USB Songs

data do not exist, Demo songs are played back.

Hold for longer than

a second.

NOTE

PlayMode

074

Song Settings

PSR-E443 Owner’s Manual

Reference

Tempo Setting of the Song

This operation is same as that of the Style and Pattern.

Refer to page 46.

Tap Sta r t

This operation is same as that of the Style and Pattern.

Refer to page 46.

Song Volume

Press the [FUNCTION] button.

Press the CATEGORY [+] and [-] buttons

several times to call up “SongVol”

(Function 002).

Rotate the dial to set the Song volume

between 000 and 127.

Melody Voice Setting of the Pre-

set Song

You can change the Melody Voice of the current Pre-

set Song temporarily to any other desired Voice.

Press the [SONG] button, select the

desired Preset Song, then start play-

back.

Press the [VOICE] button, then rotate the

dial to select the desired Voice.

Hold down the [VOICE] button for longer

than a second.

After “SONG MELODY VOICE” is shown for a

few seconds, the Melody Voice of the Song will be

changed to that selected in Step 2.

• Song volume can be adjusted while a Song is selected.

SongVol

002

100

Song volume

NOTE

• Selecting another Song will cancel the changed Melody

Voice.

• You cannot change the Melody Voice of a User Song.

Strings

069

SONG MEL

Hold for longer than

a second.

NOTE

PSR-E443 Owner’s Manual

Reference

The Functions

The “Functions” provide access to a range of detailed instrument parameters such as

Tuning, Split Point, Voices and Effects. Take a look at the Function List (pages 52–55).

When you find the desired Function you want to chang e, follow the instructions below.

Basic Procedure in the Function

Display

Find the desired item in the Function

List on pages 52–55.

Press the [FUNCTION] button.

Press the CATEGORY [+] and [-] buttons

several times until the desired item

appears.

Use the dial, the [+/YES] and [-/NO] but-

tons, or the [0]–[9] number buttons to

set the value of the selected function.

To restore the default value, press the [+/YES] and

[-/NO] buttons simultaneously. In the sole case of

the MIDI Initial Send function (page 54), pressing

the [+/YES] button executes the function while

pressing [-/NO] cancels it.

Some Function settings are maintained even if you

turn off the power, and can be transferred to the

computer as Backup Data (page 34).

Function List

StyleVol

100

001

SplitPnt

054

008

Current item

Current Function

number

Direct

numeric entry.

Press simultane-

ously to recall the

default setting.

• Increment

value by 1.

•Execute

• Decrement

value by 1.

• Cancel

Function

Number

Function Display Range/Settings Default Value Description

Volume

001 Style Volume StyleVol 000–127 100 Refer to page 47.

002 Song Volume SongVol 000–127 100 Refer to page 51.

003 Pattern Volume PatrnVol 000–127 100 Refer to page 47.

004 Aux In Volume AuxInVol 000–127 100 Refer to page 29.

Overall

005 Transpose Transpos -12–12 00 Refer to page 36.

006 Tuning Tuning

427.0Hz–453.0Hz

(in approximately

0.2Hz increments)

440.0Hz Refer to page 36.

007 Pitch Bend Range PBRange 01–12 02

Sets the range over which you can control pitch by using the

PITCH BEND wheel (page 36), in semitone increments.

008 Split Point SplitPnt 036–096 (C1–C6) 054 (F#2) Refer to page 47.

009 Touch Response TouchRes

1 (Soft), 2 (Medium),

3 (Hard), 4 (Fixed)

2 (Medium) Refer to page 37.

The Functions

PSR-E443 Owner’s Manual

Reference

Main Voice (page 17)

010 Volume M.Volume 000–127 * Determines the volume of the Main Voice.

011 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice.

012 Pan M.Pan

000 (left)–

064 (center)–

127 (right)

Determines the stereo pan position of the Main Voice. The value

“0” results in the sound being panned full left; the value “127”

results in the sound being panned full right.

013 Reverb Depth M.Reverb 000–127 *

Determines how much of the Main Voice's signal is sent to the

Reverb effect.

014 Chorus Depth M.Chorus 000–127 *

Determines how much of the Main Voice’s signal is sent to the

Chorus effect.

015 Attack Time M.Attack 000–127 064

Determines how fast the volume of the Main Voice reaches the Attack

level when the note is pressed. The larger the value, the slower the

attack rate. The smaller the value, the faster the attack rate.

016 Release Time M.Releas 000–127 064

Determines how fast the volume of the Main Voice falls to 0 when

the note is released. The larger the value, the longer the sustain.

The smaller the value, the shorter the sustain.

017

Filter Cutoff

M.Cutoff 000–127 064

Determines the Filter Cutoff Frequency (page 41) of the Main Voice.

018

Filter Resonance

M.Reso. 000–127 064 Determines the Filter Resonance (

page 41

) of the Main Voice.

Dual Voice (page 18)

019 Dual Voice D.Voice 001–755 * Selects a Dual Voice.

020 Volume D.Volume 000–127 * Determines the volume of the Dual Voice.

021 Octave D.Octave -2 – +2 * Determines the octave range for the Dual Voice.

022 Pan D.Pan

000 (left)–

064 (center)–

127 (right)

Determines the stereo pan position of the Dual Voice. A value of

“0” results in the sound being panned full left; a value of “127”

results in the sound being panned full right.

023 Reverb Depth D.Reverb 000–127 *

Determines how much of the Dual Voice’s signal is sent to the

Reverb effect.

024 Chorus Depth D.Chorus 000–127 *

Determines how much of the Dual Voice’s signal is sent to the

Chorus effect.

025 Attack Time D.Attack 000–127 064

Determines how fast the volume of the Dual Voice reaches the Attack

level when the note is pressed. The larger the value, the slower the

attack rate. The smaller the value, the faster the attack rate.

026 Release Time D.Releas 000–127 064

Determines how fast the volume of the Dual Voice falls to 0 when

the note is released. The larger the value, the longer the sustain.

The smaller the value, the shorter the sustain.

027

Filter Cutoff

D.Cutoff 000–127 064

Determines the Filter Cutoff Frequency (

page 41

) of the Dual

Voice.

028

Filter Resonance

D.Reso. 000–127 064 Determines the Filter Resonance (

page 41

) of the Dual Voice.

Split Voice (page 18)

029 Split Voice S.Voice 001–755 053 (FngrBass) Selects a Split Voice.

030 Volume S.Volume 000–127 080 Determines the volume of the Split Voice.

031 Octave S.Octave -2 – +2 -1 Determines the octave range for the Split Voice.

032 Pan S.Pan

000 (left)–

064 (center)–

127 (right)

064

Determines the stereo pan position of the Split Voice. A value of

“0” results in the sound being panned full left; a value of “127”

results in the sound being panned full right.

033 Reverb Depth S.Reverb 000–127 008

Determines how much of the Split Voice’s signal is sent to the

Reverb effect.

034 Chorus Depth S.Chorus 000–127 000

Determines how much of the Split Voice’s signal is sent to the

Chorus effect.

Effects

035 Reverb Type Reverb 01–10 ** Refer to page 35.

036 Chorus Type Chorus 1–6 ** Refer to page 35.

037 Master EQ Type MasterEQ

1 (Speaker),

2 (Headphone),

3 (Boost), 4 (Piano),

5 (Bright), 6 (Mild)

1 (Speaker) Refer to page 37.

038 Wide Type Wide 1–3 2 (Wide2)

Determines the Ultra-Wide Stereo type.

Higher values produce a greater Wide effect.

Harmony (page 20)

039 Harmony Type HarmType 01–26 * Determines the Harmony type.

040 Harmony Volume HarmVol 000–127 * Determines the volume of the Harmony effect.

Function

Number

Function Display Range/Settings Default Value Description

The Functions

PSR-E443 Owner’s Manual

Reference

Arpeggio (page 21)

041 Arpeggio Type ARP Type 001–150 * Determines the Arpeggio type.

042 Arpeggio Velocity ARP Velo 1(Original), 2(Thru)

Depending on

the Arpeggio

type

When “Thru” is selected, the velocities of Arpeggio playback are

determined by your playing strength. When “Original” is selected,

the velocities of Arpeggio playback are determined by the original

setting regardless of your playing strength.

043 Arpeggio Quantize Quantize 1(OFF), 2(1/8), 3(1/16)

Depending on

the Arpeggio

type

Refer to page 43.

044 Pedal Function Pdl Func

1 (Sustain) /

2 (Arp Hold) /

3 (Hold+Sus)

* Refer to page 43.

Scale Tuning (page 38)

045 Scale Scale

1 (Equal),

2 (Pure Maj),

3 (Pure min),

4 (Bayat), 5 (Rast)

1 (Equal) Refer to page 38.

046 Base Note BaseNote

01 (C), 02 (C#), 03 (D),

04 (Eb), 05 (E), 06 (F),

07 (F

), 08 (G), 09 (A

10 (A), 11 (Bb), 12(B)

01 (C) Refer to page 38.

047–058

Individual Note

Tuning

Tune C, C#,

D, Eb, E, F, F#,

G, Ab, A, Bb, B

-64–63 00 Refer to page 39.

Computer (USB [TO HOST] terminal)***

059 PC mode PC mode OFF/PC1/PC2 OFF Optimizes the MIDI settings when you connect to a computer

MIDI***

060 Local Control Local ON/OFF ON

Determines whether the instrument’s keyboard controls the inter-

nal tone generator (ON) or not (OFF). When you record your key-

board performance to the application software on the computer

via MIDI, set this parameter to OFF.

061 External Clock ExtClock ON/OFF OFF

Determines whether the instrument synchronizes to the internal

clock (OFF) or an external clock (ON). When you record your key-

board performance to the application software on the computer

via MIDI, set this parameter to ON.

062 Keyboard Out KbdOut ON/OFF ON

Determines whether MIDI messages generated via keyboard per-

formance are transmitted (ON) or not (OFF) from the USB [TO

HOST] terminal.

063 Style Out StyleOut ON/OFF OFF

Determines whether MIDI messages generated via Style play-

back are transmitted (ON) or not (OFF) from the USB [TO HOST]

terminal.

064 Song Out SongOut ON/OFF OFF

Determines whether MIDI messages generated via Song play-

back are transmitted (ON) or not (OFF) from the USB [TO HOST]

terminal.

065 Initial Send InitSend YES/NO -

Lets you send the data of the panel settings to a computer. Press

[+/YES] to send, or press [-/NO] to cancel. This operation should

be done immediately after starting the Recording operation on the

computer.

Metronome (page 19)

066

Time Signature

Numerator

TimesigN 00–60 ** Determines the time signature of the Metronome.

067

Time Signature

Denominator

TimesigD

Half note, Quarter

note, Eighth note,

Sixteenth note

** Determines the length of each metronome beat.

068 Metronome Volume MtrVol 000–127 100 Determines the volume of the Metronome.

Lesson (page 27)

069 Lesson Track (R) R-Part

GuideTrack01–16,

OFF

Determines the guide track number for your right hand lesson.

The setting is only effective for Songs in SMF format 0, in USB

flash memory or transferred from a computer.

070 Lesson Track (L) L-Part

GuideTrack01–16,

OFF

Determines the guide track number for your left hand lesson. The

setting is only effective for Songs in SMF format 0, in USB flash

memory or transferred from a computer.

071 Grade Grade ON/OFF ON Determines whether the Grade function is on or off.

072 Your Tempo YourTemp ON/OFF ON

This parameter is for Lesson 3 “Waiting.” When set to ON, play-

back tempo will change to match the speed at which you are play-

ing. When set to OFF, playback tempo will be maintained

regardless of the speed at which you are playing.

Function

Number

Function Display Range/Settings Default Value Description

The Functions

PSR-E443 Owner’s Manual

Reference

* The appropriate value is automatically set for each Voice.

** The appropriate value is automatically set for each Song, Style or Pattern.

*** For details, refer to “Computer-related Operations” (page 9).

Demo (page 25)

073 Demo Group DemoGrp

1 (Demo) / 2 (Preset) /

3 (User) / 4 (Down-

load) / 5 (USB)

1 (Demo) Refer to page 50.

074 Demo Play Mode PlayMode

1 (Normal)

2 (Random)

1 (Normal) Refer to page 50.

075 Demo Cancel D-Cancel ON/OFF OFF

Determines whether Demo cancel is enabled or not. When this is

set to ON, the Demo Song will not play, even if the [DEMO/BGM]

button is pressed.

Auto Power Off (page 15)

076 Auto Power Off Time AutoOff

OFF, 5/10/15/30/60/

120 (min.)

30 minutes

Specifies the time that will elapse before the instrument’s power is

automatically turned off.

Battery (page 13)

077 Battery Type

Battery

Type

1 (Alkaline) / 2 (Ni-MH) 1 (Alkaline) Selects the type of batteries you have installed to this instrument.

Language (page 58)

078 Language Language English/Japanese English Determines the language for the Song file names.

Function

Number

Function Display Range/Settings Default Value Description

PSR-E443 Owner’s Manual

Reference

USB Flash Memory Operations

By connecting the USB flash memory device to the USB [TO DEVICE] terminal, you can

save the data created on this instrument, such as User Song and parameter settings.

The saved data can be recalled to this instrument again for the future use.

• It is recommended to use the Power Adaptor when executing USB flash memory operations, since battery power may

not be reliable enough to last through these crucial operations. When you try executing certain functions, the “Use

Adaptor” indication may appear and the selected function cannot be executed.

IMPORTANT

Precautions when using the USB [TO

DEVICE] terminal

This instrument features a built-in USB [TO DEVICE]

terminal. When connecting a USB device to the terminal,

be sure to handle the USB device with care. Follow the

important precautions below.

 Compatible USB devices

• USB flash memory

Other USB devices such as a computer keyboard or

mouse cannot be used. Although USB devices 1.1 to 3.0

can be used on this instrument, the amount of time for

saving to or loading from the USB device may differ

depending on the type of data or the status of the instru-

ment. The instrument does not necessarily support all

commercially available USB devices. Yamaha cannot

guarantee operation of USB devices that you purchase.

Before purchasing a USB device for use with this instru-

ment, please visit the following web page:

http://download.yamaha.com/

 Connecting USB device

• When connecting a USB device to the USB [TO

DEVICE] terminal, make sure that the connector on

the device is appropriate and that it is connected in the

proper direction.

Using USB Flash Memory

By connecting the instrument to a USB flash memory,

you can save data you’ve created to the connected device,

as well as read data from the connected device.

 The number of USB flash memory to be used

Only one USB flash memory device can be connected to

the USB [TO DEVICE] terminal.

 Formatting USB flash memory

You should format the USB storage device only with this

instrument (page 58). A USB flash memory formatted on

another device may not operate properly.

 To protect your data (write-protect)

To prevent important data from being inadvertently

erased, apply the write-protect provided with each USB

flash memory. If you are saving data to the USB flash

memory, make sure to disable write-protect.

 Turning off the instrument

When turning off the instrument, make sure that the

instrument is NOT accessing the USB flash memory by

playback/recording or file management (such as during

Save, Copy, Delete and Format operations). Failure to do

so may corrupt the USB flash memory and the data.

• For more information about the handling of USB devices, refer

to the owner’s manual of the USB device.

• The rating of the USB [TO DEVICE] terminal is a maximum of

5V/500mA. Do not connect USB devices having a rating above

this, since this can cause damage to the instrument itself.

• Avoid connecting or disconnecting the USB device while

executing playback/recording and file management opera-

tions (such as Save, Copy, Delete and Format), or when

accessing the USB device. Failure to observe this may

result in “freezing” of the operation of the instrument or

corruption of the USB device and the data.

• When connecting then disconnecting the USB device (and

vice versa), make sure to wait a few seconds between the

two operations.

• When connecting a USB cable, make sure that the length is

less than 3 meters.

NOTE

NOTICE

NOTE

• Although CD-R/RW drives can be used to read data to the

instrument, they cannot be used for saving data.

• The format operation overwrites any previously existing

data. Make sure that the USB flash memory you are format-

ting does not contain important data.

NOTE

NOTICE

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Connecting a USB Flash Memory

Connect a USB flash memory to the

USB [TO DEVICE] terminal, being care-

ful to insert it with the proper orienta-

tion.

Wait until “USB” appears on the left cor-

ner of the display.

The “USB” indication confirms that the connected

USB flash memory has been mounted or recog-

nized.

Hold down the [FUNCTION] button for

longer than a second to call up the File

Control display.



If “UnFormat” followed by “Format?”

appears:

This indicates that the connected USB flash

memory has not been formatted, and cannot be

mounted or recognized. Execute the Format

operation by following the instructions starting

with Step 2 on page 58.

Use the CATEGORY [+] and [-] buttons to

call up the desired File Control function,

then execute it.

For details, refer to the table below.

File Control Display List

GrandPno

Load STY

Hold for longer

than a second.

Display File Control function Page

Format?

Formatting a USB Flash

Memory

Save USR

Saving User Data to a USB

Flash Memory

Save SMF

Saving a User Song as SMF

to a USB Flash Memory

Load USR

Loading User Data from a

USB Flash Memory

Load STY Loading a Style File 61

Del USR

Deleting a User File in a USB

Flash Memory

Del SMF

Deleting a SMF File in a USB

Flash Memory

Exit?

Exiting from a File Control

display

Messages may appear on the display during

File Control procedures to aid in smooth oper-

ation. Refer to the Message List on page 63

for details.

• No sound will be produced if the keyboard is played

while the file control display is showing, and only buttons

related to File Control operations will be active.

The File Control display cannot be called up in the follow-

ing situations.

• During playback of Style, Pattern, or Song

• When “USB” does not appear even if you have con-

nected a USB flash memory to the USB [TO DEVICE]

terminal.

NOTE

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Formatting a USB Flash Memory

The Format operation lets you prepare commercially

available USB flash memory for use with this instru-

ment is called “Format.”

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Format?.”

Press the [0/EXECUTE] button.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again or

the [+/YES] button to execute the Format

operation.

After a while, a message indicating completion of

the operation appears, and the “USER FILES”

folder will be created on the root directory in the

USB flash memory.

Press the [FUNCTION] button to exit

from the File Control display.

• The Format operation cannot be cancelled during

execution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

Format?

NOTICE

Recognizable file location in the USB

flash memory for Song playback (page 25)

Song title display language

File names containing Japanese katakana charac-

ters will be properly displayed if the instrument’s

display language is set to “Japanese.” All display

information other than file names will be dis-

played in English even if “Japanese” is selected.

The display language can be set via the Language

function (page 55).

• In order to play data copied to a USB flash memory

from a computer or other device, the data must be

stored either in the USB flash memory’s root directory

or a first-level/second-level folder in the root directory.

Data stored in third-level-folders created inside a sec-

ond-level folder cannot be selected and played by this

instrument.

• If playback of an external Song (created via a different

instrument or computer) produces the distorted sound,

decrease the Song Volume (page 51) to reduce the dis-

tortion then adjust the Master Volume (page 15).

IMPORTANT

NOTE

Can be selected/

played.

Cannot be

selected/played.

USB flash memory (Root)

Song

File

Song

File

Song

File

Song

File

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Saving User Data to a USB Flash

Memory

The following data created on this instrument com-

prise the “User Data.”

• All 10 User Songs

• Styles which have been transferred from a com-

puter then loaded to Style numbers 201–205.

• All the Registration Memory settings

The User Data can be saved as a single “User File”

(.usr) to a USB flash memory.

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Save USR.”

Press the [0/EXECUTE] button.

As the target file name, “USER***” (***: num-

ber) appears on the display. If desired, rotate the

dial to select a different file name from

“USER001”–“USER100.”

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Save

operation.

After a while, a message indicating completion of

the operation appears, and a User file (.usr) will be

saved in a “USER FILES” folder which will auto-

matically be created on the USB flash memory.

Press the [FUNCTION] button to exit

from the File Control display.

• The extension (.usr) of the User File will not be shown on the

display of this instrument. Confirm the extension on the com-

puter display when connecting the USB flash memory to a

computer.

Overwriting existing files

If a file that already contains data is selected

as the target user file, an overwrite confirma-

tion message will appear.

NOTE

Save USR

USER001

• The Save operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

• The amount of time required for this operation may vary

depending on the condition of the USB flash memory.

• If you want to recall the User file (.usr) to this instrument

again, execute the Load operation (page 60).

NOTICE

NOTE

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Saving a User Song as SMF to a

USB Flash Memory

A User Song can be converted to SMF (Standard

MIDI File) format 0 and saved to a USB flash mem-

ory.

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Save SMF.”

Press the [0/EXECUTE] button.

As the target User Song, “USER**” (**: number

1–10) appears on the display. If desired, rotate the

dial to select a different User Song from

“USER01”–“USER10” then press the [0/EXE-

CUTE] button.

Press the [0/EXECUTE] button again.

As the target file name on the USB flash memory,

“SONG***” (***: number 1–100) appears on the

display. If desired, rotate the dial to select the dif-

ferent file.

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Save

operation.

After a while, a message indicating completion of

the operation appears, and a User Song will be

saved as the SMF format 0 in a “USER FILES”

folder which will automatically be created on the

USB flash memory.

Press the [FUNCTION] button to exit

from the File Control display.

Loading User Data from a USB

Flash Memory

A User data (page 59) saved as a User file (.usr) to the

USB flash memory can be loaded to this instrument.

SMF (Standard MIDI File) format

With this format, various events via the keyboard

performance such as note on/off and Voice selec-

tion will be recorded as MIDI data. The SMF For-

mat 0 and Format 1 are available. A large number

of MIDI devices are compatible with SMF For-

mat 0, and most commercially available Song file

(MIDI file) is provided in SMF Format 0.

• The User Song recorded Pattern cannot be converted to SMF.

NOTE

Save SMF

User 1

SONG001

Overwriting existing files

If a file that already contains data is selected,

an overwrite confirmation message will

appear.

• The Save operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

• The amount of time required for this operation may vary

depending on the condition of the USB flash memory.

• In case a Pattern is recorded to the User Song, the Save

operation cannot be executed by pressing the [0/EXE-

CUTE] button or the [+/YES] button, and “Can’tUse”

appears on the display.

• Loading a User file will overwrite and erase the existing

data, including all 10 User Songs, Style data loaded to the

Style numbers 201–205, and all the Registration Memory

settings. Save important data you want to keep to a sepa-

rate USB flash memory before loading a User file.

NOTICE

NOTE

NOTICE

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Load USR.”

Press the [0/EXECUTE] button.

“USER***” (***: number) appears on the display

as the User file name in the USB flash memory.

As desired, rotate the dial to select a different User

file.

Note that the User file should be saved in the

USERFILES folder on the USB flash memory.

Files saved outside this folder cannot be recog-

nized.

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Load

operation.

After a while, a message indicating completion of

the operation appears.

Press the [FUNCTION] button to exit

from the File Control display.

Check the loaded data by calling up the

User Song, one of the Styles 201–205,

and Registration Memory settings.

Loading a Style File

Style data created on another instrument or a com-

puter can be loaded to the Style numbers 201–205,

and you can play them like the internal preset Styles.

The following two Load operations are available.

 Loading of a Style file (.sty) saved on the root

directory on the USB flash memory

 Loading of a Style file (.sty) transferred from a

computer via the Musicsoft Downloader and stored

in the internal memory of this instrument

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Load STY.”

Press the [0/EXECUTE] button.

A name of a Style file in the USB flash memory or

internal memory of this instrument will appear on

the display. As desired, rotate the dial to select a

different Style file.

Press the [0/EXECUTE] button again.

As the Load destination, “Load To? ***” (***:

201–205) appears on the display. If desired, rotate

the dial to select a different number.

• The Load operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

Load USR

USER001

NOTICE

• For instructions on transferring a Style file from a computer via

the Musicsoft Downloader, refer to “Computer-related Opera-

tions” (page 9). After data transfer, load the Style data to one

of the Style numbers 201–205 to enable playback.

• Loading a Style file will overwrite and erase the existing

data of the destination number. Save important data you

want to keep to a separate USB flash memory before load-

ing.

NOTE

NOTICE

Load STY

DiscoFox

FLA

Load To?

201

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Load

operation.

After a while, a message indicating completion of

the operation appears.

Press the [STYLE] button, rotate the dial

to select a Style from 201–205, then try

playing it back.

Deleting a User File in the USB

Flash Memory

User Files (.usr) in the root directory of the USB flash

memory can be deleted.

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Del USR.”

Press the [0/EXECUTE] button.

As a User file name in the USB flash memory,

“USER****” (****: number) appears on the dis-

play. As desired, rotate the dial to select a different

User file.

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Delete

operation.

After a while, a message indicating completion of

the operation appears.

Press the [FUNCTION] button to exit

from the File Control display.

Deleting a SMF File in the USB

Flash Memory

You can delete a SMF file that has been saved in the

USB flash memory via the Save SMF operation (page

60).

Hold the [FUNCTION] button for longer

than a second to call up the File Control

display.

Use the CATEGORY [+] and [-] buttons to

call up “Del SMF.”

Press the [0/EXECUTE] button.

As a SMF file name in the USB flash memory,

“SONG***” (***: number) appears on the dis-

play. As desired, rotate the dial to select a different

SMF file.

• The Load operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

• The User file (.usr) to be deleted should have been saved in

the root directory of the USB flash memory. Files outside

this folder cannot be recognized.

NOTICE

IMPORTANT

Del USR

USER001

• The Delete operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

• The SMF file (.usr) to be deleted should have been saved in

the root directory of the USB flash memory. Files outside

this folder cannot be recognized. This operation can be

applied only to file names with the “SONG***” (***: 001–

100) format.

NOTICE

IMPORTANT

Del SMF

SONG001

USB Flash Memory Operations

PSR-E443 Owner’s Manual

Reference

Press the [0/EXECUTE] button again.

A confirmation message will appear. To cancel the

operation, press the [-/NO] button.

Press the [0/EXECUTE] button again, or

the [+/YES] button to execute the Delete

operation.

After a while, a message indicating completion of

the operation appears.

Press the [FUNCTION] button to exit

from the File Control display.

Exiting from a File Control display

To exit from the File Control display, press the

[VOICE], [STYLE], [PATTERN], [SONG], [FUNC-

TION], or [PORTABLE GRAND] button.

You can also exit from the File Control function mode

as follows:

Use the CATEGORY [+] and [-] buttons to

call up “Exit?.”

Press the [0/EXECUTE] button to exit

from the File Control display.

Message List

• The Delete operation cannot be cancelled during exe-

cution. Never turn off the power or disconnect the

USB flash memory during the operation. Doing so

may result in data loss.

NOTICE

Exit?

Message Comment

Can’tUse

• Indicates that the file control function is cur-

rently unavailable since the media is being

accessed.

• Displayed when attempting to save a User

Song recorded Pattern as SMF format 0.

Complet.

Indicates the specified job completion such as

data saving and transmission.

Data Err

Displayed when the user song contains illegal

data.

Disk Ful

Displayed when saving data cannot be exe-

cuted since the media memory becomes full.

Error

Displayed when a file error or operational error

occurs.

File Ful

Indicates that SMF songs cannot be displayed

since the total number of files exceeds the

capacity.

no data There is no data to save in the flash memory.

no file There is no file to load or delete from the media.

Communication with the USB device has been

shut down because of the overcurrent to the

USB device. Disconnect the device from the

USB [TO DEVICE] terminal, then turn on the

power of the instrument.

Protect

Displayed when trying to save or delete data on

a protected media, or format a protected media.

Set protect to off and try again.

UnFormat

Displayed when connecting an unformatted

media.

UseAdpt

USB flash memory save, delete, and format

operations cannot be performed when the

instrument is being powered from battery. Use

an AC adaptor.

0ur

PSR-E443 Owner’s Manual

Appendix

Troubleshooting

Problem Possible Cause and Solution

When the instrument is turned on or off, a popping

sound is temporarily produced.

This is normal and indicates that the instrument is receiving electri-

cal power.

When using a mobile phone, noise is produced

Using a mobile phone in close proximity to the instrument may pro-

duce interference. To prevent this, turn off the mobile phone or use

it further away from the instrument

The instrument is automatically turned off even if no

operation is done.

This is normal. This occurs due to the Auto Power Off function

(page 15).

The volume is too soft.

The sound quality is poor.

The Style/Pattern/Song/Arpeggio stops unexpectedly or

will not play.

The recorded data of the song, etc. does not play cor-

rectly.

The LCD display suddenly goes dark, and all panel set-

tings are reset.

The batteries are low or dead. Replace all six batteries with com-

pletely new ones or completely recharged ones, or use the AC

power adaptor.

No sound is produced even when the keyboard is

played, or a Song, Style, or Pattern is being played back.

Check whether a set of headphones or an audio cable is con-

nected to the [PHONES/OUTPUT], or not. When such a connec-

tion is made, no sound is output from the speaker of this

instrument.

Check the on/off status of the Local Control (page 54). Normally,

set this parameter to ON.

The footswitch (for sustain) seems to produce the oppo-

site effect. For example, pressing the footswitch cuts off

the sound and releasing it sustains the sounds.

The polarity of the footswitch is reversed. Make sure that the foot-

switch plug is properly connected to the SUSTAIN jack before turn-

ing on the power.

No sound is produced even when playing keys in the

right hand area of the keyboard, although chords played

in the left hand area are recognized.

Check whether or not the Dictionary function (page 49) is used.

When used, this is normal.

Not all of the Voices seem to sound, or the sound seems

to be cut off, when playing the keyboard, Arpeggio, Style

or Pattern or Song.

You have exceeded 32 simultaneous notes, which is the maximum

polyphony (the maximum amount of notes that can be played

simultaneously) of this instrument. If the Main, Dual, and Split

Voices are being used along with playback of Arpeggio, Style, Pat-

tern or Song, some notes/sounds may be omitted (or “stolen”).

The sound of the Voice changes from note to note.

This is normal. The tone generation method uses multiple record-

ings (samples) of an instrument across the range of the keyboard;

thus, the actual sound of the Voice may be slightly different from

note to note.

The keyboard performance and playback of Style/Pat-

tern/Song produces an unexpected or inappropriate

sound, and cannot be restored to the normal status.

Using the Knobs can produce dramatic changes in the sound, but

may also produce unexpected or undesired sounds. If you want to

restore the original, normal sound before being changed by the

Knobs, change the Voice, Style, Pattern or Song, or press the

[PORTABLE GRAND] button to reset the panel settings.

The Style, Pattern or Song does not start even when the

[START/STOP] button is pressed. The Arpeggio does

not start even when the note is pressed with the Arpeg-

gio turned on.

Check the on/off status of the External Clock (page 54). Normally,

set this parameter to OFF.

The volume of the Style, Pattern or Song is too low. Check the volume setting in the Functions (pages 47 and 51).

The chords played in the left hand area cannot be recog-

nized even when the ACMP is turned on.

Check the Split Point setting (page 47). Set this to the appropriate

value.

Style parts other than the Rhythm part produce no

sound.

Check the on/off status of the ACMP (page 23). Make sure to turn

ACMP on.

The Styles numbered 176 or 188–200 produce no

rhythm drum sound even when the [START/STOP] but-

ton is pressed.

This is normal. Style numbers 176 and 188–200 have no rhythm

parts, so no rhythm will play. When one of these Styles is selected,

turn ACMP on, then specify the chord in the left hand area to play

Style parts other than the Rhythm part.

The ACMP indicator does not appear on the display

when the [ACMP ON/OFF] button is pressed.

Check the on/off status of the [STYLE] lamp. When using a Style,

press the [STYLE] button to turn on the [STYLE] lamp.

Appendix

PSR-E443 Owner’s Manual

Appendix

Specifications

* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify

products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please

check with your Yamaha dealer.

Size/Weight

Dimensions (W x D x H) 946mm x 405mm x 140mm (37-1/4” x 15-15/16” x 5-1/2”)

Weight 6.8kg (15lbs 0oz.) (not including batteries)

Keyboard

Number of Keys 61

Touch Response Soft, Medium, Hard, Fixed

Other Controllers

Pitch Bend Yes

Control Knobs Yes

Display

Display LCD display

Language English

Voices

Tone Generation

Tone Generating Technology

AWM Stereo Sampling

Polyphony

Number of Polyphony (Max.)

Preset Number of Voices 234 panel Voices + 24 Drum/SFX kits + 40 Arpeggio + 457 XGlite Voices

Compatibility GM, XGlite

Effects

Ty pes

Reverb 9 types

Chorus 5 types

Master EQ 6 types

Harmony 26 types

Ultra-Wide Stereo 3 types

Functions

Dual Yes

Split Yes

Arpeggio type 150 types

Melody Suppressor Yes

Accompaniment

Styles

Preset

Number of Preset Styles 200

Fingering Multi finger

Style Control

ACMP ON/OFF, SYNC START, SYNC STOP, START/STOP, INTRO/ENDING/rit.,

MAIN/AUTO FILL, TRACK ON/OFF

External Styles 5

Other Features Music Database 305

Pattern Preset

Preset Patterns 20

Sections 5

Recording/Playback

(MIDI data only; audio

not supported.)

Preset Number of Preset Songs 30

Recording

Number of Songs 10

Number of Tracks 6 (5 Melody + 1 Style/Pattern)

Data Capacity Approx. 19,000 notes (when only “melody” tracks are recorded)

Compatible

Data Format

Playback SMF Formats 0 & 1

Recording Original File Format (SMF0 conversion function)

Function

Lesson/Guide [1 LISTENING 2 TIMING 3 WAITING], [Repeat & Learn], [Chord Dictionary]

Registration Number of Buttons 4 (×8 banks)

Overall

Metronome Yes

Tempo Range 11 – 280

Transpose -12 to 0, 0 to +12

Tuning 427.0 – 440.0 – 453.0 Hz (approx. 0.2Hz increments)

Scale Yes

Miscellaneous

One Touch Setting (OTS) Yes

Portable Grand Button Yes

Memory/

Connectivity

Memory

Internal Memory Approx. 1.54MB

External Storage Device USB flash memory

Connectivity

DC IN DC IN 12V

Headphones/Output [PHONES/OUTPUT] x 1

Sustain Pedal [SUSTAIN] x 1

USB TO DEVICE Yes

USB TO HOST Yes

AUX IN (Stereo-mini) Yes

Amplifiers/Speakers

Amplifiers 2.5W+2.5W

Speakers 12cm×2 + 3cm×2

Power Supply

Adaptor

Users within U.S or Europe: PA-150 or an equivalent recommended by Yamaha

Others: PA-5D, PA-150 or an equivalent

Batteries

Six “AA” size alkaline (LR6), manganese (R6) or Ni-MH rechargeable batteries

Power Consumption 15W (PA-150)

Auto Power Off Function Yes

Accessories

Included Accessories

• Owner’s Manual

• Data List

• AC Power Adaptor

PA-150 or an equivalent

* May not be included depending on your particular area. Please check with your Yamaha dealer.

•Music Rest

• Online Member Product Registration

Optional Accessories

• AC Power Adaptor:

Users within U.S or Europe: PA-150 or an equivalent recommended by Yamaha

Others: PA-5D, PA-150 or an equivalent

• Keyboard Stand (L-2C)

• Stereo Headphones (HPE-150/HPE-30)

• Footswitch (FC4/FC5)

• USB MIDI Interface for iPhone/iPod touch/iPad (i-UX1)

PSR-E443 Owner’s Manual

Appendix

Index

A-B Repeat ................................... 26

AC Power Adaptor .................. 8, 12

Accessories .................................... 8

ACMP ..................................... 23, 44

Arpeggio ..................... 21, 24, 43, 54

Arpeggio Quantize ................ 43, 54

Arpeggio Type ....................... 21, 54

Arpeggio Velocity ........................ 54

ATTACK ...................................... 41

Attack Time ................................. 53

Audio file ..................... 8, 25, 30, 34

Auto Accompaniment ................. 44

Auto Accompaniment range ....... 23

AUTO FILL ................................. 44

Auto Power Off ...................... 15, 55

Auto Power Off Time .................. 55

AUX IN .................................. 22, 41

Aux In Volume ............................. 52

Backup .......................................... 34

Backup Clear ............................... 34

Backup parameters ...................... 34

BALANCE ................................... 41

Base Note ............................... 38, 54

Battery .................................... 13, 55

Battery Type ........................... 13, 55

Bayat ............................................. 38

Beat ............................................... 16

BGM (Background Music) .........50

Can’tUse ....................................... 63

Chord ...................................... 16, 47

Chord Dictionary ......................... 49

Chord Type ................................... 48

CHORUS ...................................... 41

Chorus Depth ............................... 53

Chorus Type ........................... 35, 53

Complet. ....................................... 63

Computer ................................ 34, 54

Computer-related Operations ....... 9

CUTOFF ...................................... 41

Data Err .........................................63

Del SMF .................................57, 62

Del USR ..................................57, 62

Demo Cancel ................................55

Demo Group .................................55

Demo Play Mode .........................55

Demo Song ...................................25

Disk Ful ........................................63

Display ..........................................16

Dual Voice ........................18, 40, 53

EFFECT ..................................22, 41

EG (Envelope Generator) ......22, 41

ENDING .......................................44

EQ Setting ....................................37

Equal .............................................38

Error ..............................................63

Excellent .......................................28

Exit ..........................................57, 63

External Audio Device ................29

External Clock ..............................54

Fast Forward .................................26

Fast Reverse ..................................26

File Control Display List .............57

File Ful ..........................................63

FILTER ...................................22, 41

Filter Cutoff ..................................53

Filter Resonance ..........................53

Fine Tuning ..................................36

Flash Clear ....................................34

Footswitch ..............................14, 43

Format .....................................57, 58

Front Panel ...................................10

Function ..................................16, 52

Function List ................................52

GM System Level 1 .......................8

Good ..............................................28

Grade .......................................28, 54

Harmony ................................ 20, 53

Harmony Type ....................... 20, 53

Harmony Volume ........................ 53

Headphones ................................. 14

Individual Note Tuning ............... 54

Initial Send ................................... 54

Initialization ................................. 34

INTRO .......................................... 44

iPad/iPhone .................................. 34

iPhone/iPad Connection Manual .. 9

Keyboard Out .............................. 54

Knob ................................. 22, 24, 41

Knob assignment ......................... 16

Language ...................................... 55

Lesson .................................... 27, 54

Lesson Track ................................ 54

Limitations while recording ....... 31

Listen ............................................ 27

Load STY ............................... 57, 61

Load USR .............................. 57, 61

Local Control ............................... 54

MAIN ........................................... 44

Main Voice ............................. 17, 53

Master EQ .................................... 37

Master EQ Type ..................... 37, 53

MASTER VOLUME .................. 15

MEASURE .................................. 16

Melody Suppressor ..................... 29

Melody Voice ............................... 51

Message List ................................ 63

Metronome ............................. 19, 54

Metronome Tempo ...................... 19

Metronome Volume ............... 19, 54

MIDI ............................................. 54

MIDI Basics ................................... 9

MIDI Reference ............................. 9

Music Database ........................... 23

Music Rest ..................................... 8

Index

PSR-E443 Owner’s Manual

Appendix

no data .......................................... 63

no file ............................................ 63

Notation ........................................ 16

Octave ........................................... 53

OK ................................................ 28

One Touch Setting ....................... 36

Optional Song .............................. 25

Original Scale .............................. 39

OTS ............................................... 36

Pan ................................................ 53

Panel Settings ............................... 33

Pattern ............................... 24, 44, 46

Pattern Volume ....................... 47, 52

Pause ............................................. 26

PC mode ....................................... 54

Pedal Function ............................. 54

PITCH BEND .............................. 36

Pitch Bend Range .................. 36, 52

Pitch Controls .............................. 36

Power ............................................ 15

Power source ................................ 13

Preset Scale types ........................ 38

Preset Song ............................. 25, 51

Preset Voice Types ....................... 17

Press & Hold ................................ 11

Protect ........................................... 63

Pure Major ................................... 38

Pure Minor ................................... 38

Random ........................................ 50

Rast ............................................... 38

Rear Panel .................................... 11

Recording ..................................... 30

Registration Memory .................. 33

RELEASE .................................... 41

Release Time ................................ 53

Repeat & Learn ............................ 28

RESONANCE ............................. 41

Retrigger ................................. 24, 46

RETRIGGER RATE ................... 42

REVERB ...................................... 41

Reverb Depth ............................... 53

Reverb Type ........................... 35, 53

Rewind .......................................... 26

Save SMF ...............................57, 60

Save USR ................................57, 59

Scale ........................................38, 54

Scale Tuning ...........................38, 54

Section ..............................24, 44, 46

SMF (Standard MIDI File) ...60, 62

Song ........................................25, 50

Song Book ......................................9

Song Category ..............................25

Song Data .......................................9

Song Out .......................................54

Song title display language .........58

Song Volume ..........................51, 52

SPECIAL EFFECT ................22, 42

Specifications ...............................65

Split Point ...................18, 23, 47, 52

Split Voice ........................18, 40, 53

Style ........................................23, 44

STYLE FILE ..................................8

STYLE FILTER .....................22, 41

Style Out .......................................54

Style Volume ..........................47, 52

SUPPRESSOR PAN ....................41

Synchro Start ..........................23, 44

Synchro Stop ................................45

Tap Start ........................................46

Tempo ...........................................46

Time Signature .......................19, 54

Timing ...........................................27

Touch Response .....................37, 52

Track .................................16, 30, 45

TRACK CONTROL ..............24, 45

Track On/Off ................................26

Transpose ................................36, 52

Troubleshooting ...........................64

Tuning ...........................................52

Tuning (Scale) ..............................39

ULTRA WIDE STEREO ............ 42

Ultra-Wide Stereo ....................... 53

UnFormat ..................................... 63

USB ................................................ 8

USB [TO DEVICE] .................... 56

USB [TO HOST] ................... 11, 54

USB Flash Memory .................... 56

UseAdpt ....................................... 63

User Data ............................... 59, 60

User File ....................................... 62

User Song ............................... 32, 60

Ver y G o o d .................................... 28

Vo i c e ....................................... 17, 40

Volume ................................... 52, 53

Volume (Pattern) .................... 47, 52

Volume (Song) ....................... 51, 52

Volume (Style) ....................... 47, 52

Waiting ......................................... 27

Wide Type .................................... 53

XGlite ............................................. 8

Your Tempo ........................... 27, 54

MEMO

LIMITED 1-YEAR WARRANTY ON

PORTABLE KEYBOARDS

(NP, NPV, PSRE, EZ, DGX230, DGX530, YPG AND YPT SERIES)

Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free

performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every

Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the

Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha’s authorized

dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in the Warranted Area. Yamaha

suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or Yamaha Customer

Service if you have any questions.

Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or

otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or

materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If Yamaha

elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or removal charges and

for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay the return shipping charges to

any destination within the USA if the repairs are covered by the warranty. This warranty does not cover (a) damage, deterioration or

malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions according to

the Owner’s Manual for this product; any shipment of the product (claims must be presented to the carrier); repair or attempted repair by

anyone other than Yamaha or an authorized Yamaha Service Center; (b) any unit which has been altered or on which the serial number has

been defaced, modified or removed; (c) normal wear and any periodic maintenance; (d) deterioration due to perspiration, corrosive atmosphere

or other external causes such as extremes in temperature or humidity; (e) damages attributable to power line surge or related electrical

abnormalities, lightning damage or acts of God; or (f) RFI/EMI (Interference/noise) caused by improper grounding or the improper use of either

certified or uncertified equipment, if applicable. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this

warranty to be void. This warranty covers only the Original Owner and is not transferable.

In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted Area.

Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact Yamaha at

the address, telephone number or website shown below. Yamaha may request that you send the defective product to a local authorized

Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to whether a dealer has been

authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or check Yamaha’s website at

www.Yamaha.com

. Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the

problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase document

describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found ineligible therefore, an

estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of payment or acceptable

arrangement for payment.

Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE

APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER

ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES. YAMAHA’S LIABILITY FOR ANY

DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT YAMAHA’S OPTION. SOME STATES DO

NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. This Warranty gives you specific

legal rights, and you may also have other rights which vary from state to state. This is the only express warranty applicable to the product

specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty.

If you have any questions about service received or if you need assistance in locating an authorized Yamaha Servicer, please contact:

CUSTOMER SERVICE

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, California 90620-1373

Telephone: 800-854-1569

www.yamaha.com

Do not return any product to the above address without a written Return Authorization issued by YAMAHA.

For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.

CANADA

Yamaha Canada Music Ltd.

135 Milner Avenue, Toronto, Ontario,

M1S 3R1, Canada

Tel: 416-298-1311

U.S.A.

Yamaha Corporation of America

6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A.

Tel: 714-522-9011

MEXICO

Yamaha de México, S.A. de C.V.

Av. Insurgentes Sur 1647 “Prisma Insurgentes”,

Col. San Jose Insurgentes, Del. Benito Juarez,

03900, Mexico, D.F.

Tel: 55-5804-0600

BRAZIL

Yamaha Musical do Brasil Ltda.

Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi,

CEP 04534-013 São Paulo, SP. BRAZIL

Tel: 011-3704-1377

ARGENTINA

Yamaha Music Latin America, S.A.,

Sucursal Argentina

Olga Cossettini 1553, Piso 4 Norte,

Madero Este-C1107CEK

Buenos Aires, Argentina

Tel: 54-11-4119-7000

VENEZUELA

Yamaha Music Latin America, S.A.,

Sucursal Venezuela

C.C. Manzanares Plaza P4

Ofic. 0401- Manzanares-Baruta

Caracas Venezuela

Tel: 58-212-943-1877

PANAMA AND OTHER LATIN

AMERICAN COUNTRIES/

CARIBBEAN COUNTRIES

Yamaha Music Latin America, S.A.

Torre Banco General, Piso No.7, Marbella,

Calle 47 y Aquilino de la Guardia,

Ciudad de Panamá, República de Panamá

Tel: +507-269-5311

THE UNITED KINGDOM/IRELAND

Yamaha Music Europe GmbH (UK)

Sherbourne Drive, Tilbrook, Milton Keynes,

MK7 8BL, U.K.

Tel: 01908-366700

GERMANY

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: 04101-3030

SWITZERLAND/LIECHTENSTEIN

Yamaha Music Europe GmbH

Branch Switzerland in Zürich

Seefeldstrasse 94, 8008 Zürich, Switzerland

Tel: 044-387-8080

AUSTRIA

Yamaha Music Europe GmbH Branch Austria

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

CZECH REPUBLIC/HUNGARY/

ROMANIA/SLOVAKIA/SLOVENIA

Yamaha Music Europe GmbH

Branch Austria (Central Eastern Europe Office)

Schleiergasse 20, A-1100 Wien, Austria

Tel: 01-60203900

POLAND/LITHUANIA/LATVIA/

ESTONIA

Yamaha Music Europe GmbH

Branch Poland Office

ul. Wrotkowa 14 02-553 Warsaw, Poland

Tel: 022-500-2925

BULGARIA

Dinacord Bulgaria LTD.

Bul.Iskarsko Schose 7 Targowski Zentar Ewropa

1528 Sofia, Bulgaria

Tel: 02-978-20-25

MALTA

Olimpus Music Ltd.

The Emporium, Level 3, St. Louis Street Msida

MSD06

Tel: 02133-2144

NETHERLANDS/BELGIUM/

LUXEMBOURG

Yamaha Music Europe Branch Benelux

Clarissenhof 5-b, 4133 AB Vianen, Netherlands

Tel: 0347-358 040

FRANCE

Yamaha Music Europe

7 rue Ambroise Croizat, Zone d'activites Pariest,

77183 Croissy-Beaubourg, France

Tel: 01-64-61-4000

ITALY

Yamaha Music Europe GmbH, Branch Italy

Viale Italia 88, 20020 Lainate (Milano), Italy

Tel: 02-935-771

SPAIN/PORTUGAL

Yamaha Music Europe GmbH Ibérica, Sucursal

en España

Ctra. de la Coruna km. 17,200, 28231

Las Rozas (Madrid), Spain

Tel: +34-91-639-88-88

GREECE

Philippos Nakas S.A. The Music House

147 Skiathou Street, 112-55 Athens, Greece

Tel: 01-228 2160

SWEDEN

Yamaha Music Europe GmbH Germany filial

Scandinavia

J. A. Wettergrensgata 1, Box 30053

S-400 43 Göteborg, Sweden

Tel: +46 31 89 34 00

DENMARK

Yamaha Music Europe GmbH, Tyskland – filial

Denmark

Generatorvej 6A, DK-2730 Herlev, Denmark

Tel: 44 92 49 00

FINLAND

F-Musiikki Oy

Kluuvikatu 6, P.O. Box 260,

SF-00101 Helsinki, Finland

Tel: 09 618511

NORWAY

Yamaha Music Europe GmbH Germany -

Norwegian Branch

Grini Næringspark 1, N-1361 Østerås, Norway

Tel: 67 16 78 00

ICELAND

Skifan HF

Skeifan 17 P.O. Box 8120, IS-128 Reykjavik,

Iceland

Tel: 525 5000

RUSSIA

Yamaha Music (Russia) LLC.

Room 37, bld. 7, Kievskaya street, Moscow,

121059, Russia

Tel: 495 626 5005

OTHER EUROPEAN COUNTRIES

Yamaha Music Europe GmbH

Siemensstraße 22-34, 25462 Rellingen, Germany

Tel: +49-4101-3030

SOUTH AFRICA

Global Music Instruments

Unit 4, 130 Boeing Road East Bedfordview 2008

Postnet Suite 130, Private Bag X10020 Edenvale

1610, South Africa

Tel: 27-11-454-1131

OTHER AFRICAN COUNTRIES

Yamaha Music Gulf FZE

LOB 16-513, P.O.Box 17328, Jebel Ali,

Dubai, United Arab Emirates

Tel: +971-4-881-5868

TURKEY/CYPRUS

Yamaha Music Europe GmbH

Merkezi Almanya Türkiye İstanbul Şubesi

Maslak Meydan Sokak No:5 Spring Giz Plaza

Bağımsız Böl. No:3, 34398 Şişli, İstanbul

Tel: +90-212-999-8010

OTHER COUNTRIES

Yamaha Music Gulf FZE

LOB 16-513, P.O.Box 17328, Jebel Ali,

Dubai, United Arab Emirates

Tel: +971-4-881-5868

THE PEOPLE’S REPUBLIC OF CHINA

Yamaha Music & Electronics (China) Co.,Ltd.

2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,

Shanghai, China

Tel: 021-6247-2211

HONG KONG

Tom Lee Music Co., Ltd.

11/F., Silvercord Tower 1, 30 Canton Road,

Tsimshatsui, Kowloon, Hong Kong

Tel: 2737-7688

INDIA

Yamaha Music India Pvt. Ltd.

Spazedge building, Ground Floor, Tower A, Sector

47, Gurgaon- Sohna Road, Gurgaon, Haryana, India

Tel: 0124-485-3300

INDONESIA

PT. Yamaha Musik Indonesia (Distributor)

Yamaha Music Center Bldg. Jalan Jend. Gatot

Subroto Kav. 4, Jakarta 12930, Indonesia

Tel: 021-520-2577

KOREA

Yamaha Music Korea Ltd.

8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,

Kangnam-Gu, Seoul, Korea

Tel: 02-3467-3300

MALAYSIA

Yamaha Music (Malaysia) Sdn., Bhd.

No.8, Jalan Perbandaran, Kelana Jaya, 47301

Petaling Jaya, Selangor, Malaysia

Tel: 03-78030900

PHILIPPINES

Yupangco Music Corporation

339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,

Makati, Metro Manila, Philippines

Tel: 819-7551

SINGAPORE

Yamaha Music (Asia) Private Limited

Block 202 Hougang Street 21, #02-00,

Singapore 530202, Singapore

Tel: 65-6747-4374

TAIWAN

Yamaha Music & Electronics Taiwan Co.,Ltd.

3F, No.6, Section 2 Nan-Jing East Road, Taipei,

Taiwan R.O.C.

Tel: 02-2511-8688

THAILAND

Siam Music Yamaha Co., Ltd.

3, 4, 15 and 16th floor, Siam Motors Building,

891/1 Rama 1 Road, Wangmai,

Pathumwan, Bangkok 10330, Thailand

Tel: 02-215-2622

VIETNAM

Yamaha Music Vietnam Company Limited

15th Floor, Nam A Bank Tower, 201-203 Cach

Mang Thang Tam St., Ward 4, Dist.3,

Ho Chi Minh City, Vietnam

Tel: +84-8-3818-1122

OTHER ASIAN COUNTRIES

Yamaha Corporation

Market Development Section

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

AUSTRALIA

Yamaha Music Australia Pty. Ltd.

Level 1, 99 Queensbridge Street, Southbank,

Victoria 3006, Australia

Tel: 3-9693-5111

NEW ZEALAND

Music Works LTD

P.O.BOX 6246 Wellesley, Auckland 4680,

New Zealand

Tel: 9-634-0099

COUNTRIES AND TRUST

TERRITORIES IN PACIFIC OCEAN

Yamaha Corporation

Market Development Section

Nakazawa-cho 10-1, Naka-ku, Hamamatsu,

Japan 430-8650

Tel: +81-53-460-2312

NORTH AMERICA

CENTRAL & SOUTH AMERICA

EUROPE

AFRICA

MIDDLE EAST

ASIA

OCEANIA

DMI7

ZH22090

C.S.G., DMI Development Division

Published 03/2014 PO##*.*-**B0

Printed in China

Yamaha Global Site

http://www.yamaha.com/

Yamaha Downloads

http://download.yamaha.com/

Transcripción de documentos

Appendix Reference Quick Guide Setting Up DIGITAL KEYBOARD Owner’s Manual EN SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. Serial No. Purchase Date ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: PLEASE KEEP THIS MANUAL 92-BP (bottom) FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/ or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. 2 PSR-E443 Owner’s Manual not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. (class B) OBSERVERA! Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av. ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt, sålænge netledningen sidder i en stikkontakt, som er tændt — også selvom der er slukket på apparatets afbryder. Entsorgung leerer Batterien (nur innerhalb Deutschlands) Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben werden. Informieren Sie sich bei Ihrer Kommune. (battery) VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta. (standby) The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (bottom_en_01) COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620 Telephone : 714-522-9011 Type of Equipment : Digital Keyboard Model Name : PSR-E443 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) For PSR-E443 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. (weee_battery_eu_en_01) For AC Power Adaptor Information for Users on Collection and Disposal of Old Equipment This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. (weee_eu_en_01) PSR-E443 Owner’s Manual 3 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Battery • Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. • Follow the precautions below. Failure to do so might result in explosion, fire, overheating or battery fluid leakage. - Do not tamper with or disassemble batteries. • Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. - Do not dispose of batteries in fire. - Do not attempt to recharge batteries that are not designed to be charged. • Use the specified adaptor (page 65) only. Using the wrong adaptor can result in damage to the instrument or overheating. - Keep the batteries separate from metallic objects such as necklaces, hairpins, coins, and keys. • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. - Use the specified battery type (page 13) only. - Use new batteries, all of which are the same type, same model, and made by the same manufacturer. Do not open - Always make sure all batteries are inserted in conformity with the +/- polarity markings. • This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. - When the batteries run out, or if the instrument is not to be used for a long time, remove the batteries from the instrument. - When using Ni-MH batteries, follow the instructions that came with the batteries. Use only the specified charger device when charging. • Keep batteries away from small children who might accidentally swallow them. Water warning • Do not expose the instrument to rain, use it near water or in damp or wet conditions, place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. • Never insert or remove an electric plug with wet hands. • If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns. If you notice any abnormality • When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. (If you are using batteries, remove all batteries from the instrument.) Then have the device inspected by Yamaha service personnel. Fire warning - The power cord or plug becomes frayed or damaged. • Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. - It emits unusual smells or smoke. - Some object has been dropped into the instrument. - There is a sudden loss of sound during use of the instrument. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/AC power adaptor Location • Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. • When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. • Do not place the instrument in an unstable position where it might accidentally fall over. • Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. • Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. DMI-5 4 PSR-E443 Owner’s Manual 1/2 • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. • Do not insert a finger or hand in any gaps on the instrument. • Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over. • Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. Connections • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Handling caution • Never insert or drop paper, metallic, or other objects into the gaps on the panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. Make sure to discard used batteries according to local regulations. NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.  Handling and Maintenance • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with an application on your iPad, iPhone or iPod touch, we recommend that you set “Airplane Mode” to “ON” on that device in order to avoid noise caused by communication. • Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.) • Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. • When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.  Saving data • Some data items (page 34) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a USB flash memory (page 56). • To protect against data loss through media damage, we recommend that you save your important data onto two USB flash memories. Information  About copyrights • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others' copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON'T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.  About functions/data bundled with the instrument • Some of the preset songs and the optional songs have been edited for length or arrangement, and may not be exactly the same as the original.  About this manual • The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. • iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. DMI-5 2/2 PSR-E443 Owner’s Manual 5 Table of Contents Setting Up Special Features ..............................................................6 Compatible Format and Functions ...................................8 Included Accessories .......................................................8 About the Manuals ...........................................................9 Setting Up Panel Controls and Terminals 10 Setting Up 12 Power Requirements......................................................12 Connecting Headphones or External Audio Equipment...14 Connecting a Footswitch to the [SUSTAIN] jack ............14 Basic Operations 15 Turning the Power On/Off ..............................................15 Auto Power Off Function ................................................15 Selecting Operations ......................................................15 Display Items 16 Quick Guide Quick Guide Try Playing a Variety of Instrument Voices 17 Selecting a Main Voice...................................................17 Playing the “Grand Piano” ..............................................17 Layering a Dual Voice ....................................................18 Playing a Split Voice in the Left Hand area ....................18 Using the Metronome .....................................................19 Adding Harmony ............................................................20 Creating Arpeggios 21 Triggering the Arpeggio..................................................21 Changing the Arpeggio Type .........................................21 Creating Original Sounds via the Knobs Playing Styles 23 Using the Music Database .............................................23 Playing with Patterns Like a DJ! 24 Playing Songs 25 Listening to a Demo Song..............................................25 Selecting and Playing Back a Song ...............................25 Song Fast Forward, Fast Reverse, and Pause ..............26 A-B Repeat ....................................................................26 Turning Each Track On/Off ............................................26 Using the Song Lesson Feature 27 Three Types of Song Lesson .........................................27 Practicing with Song Lesson ..........................................27 Making Practice Perfect—Repeat & Learn ....................28 Playing an External Audio Device with the Built-in Speakers 29 Using the Melody Suppressor ........................................29 Recording Your Performance 30 Track Structure of a Song ..............................................30 Quick Recording ............................................................30 Recording to a Specified Track ......................................31 Clearing a User Song.....................................................32 Clearing a Specified Track from a User Song................32 Memorizing Your Favorite Panel Settings 33 Memorizing Panel Settings to the Registration Memory...33 Recalling Panel Settings from the Registration Memory ..33 Using with a Computer or iPad/iPhone 34 Connecting to a computer ..............................................34 Connecting an iPad/iPhone ...........................................34 Backup and Initialization 34 Backup Parameters .......................................................34 Initialization ....................................................................34 22 Selecting a Knob Effect Combination.............................22 Applying the Filter to the Main Voice..............................22 Reference Special Features Play a Variety of Instrument Voices Page 17 Appendix The instrument voice that sounds when you play the keyboard can be changed to violin, flute, harp, or any of an extensive range of voices. 6 PSR-E443 Owner’s Manual Arpeggio Function Page 21 Similar to the arpeggio functions provided on some synthesizers, this function automatically produces arpeggios (broken chords) when you simply play the appropriate notes on the keyboard. Convenient Melody Suppressor Page 29 When the sound of an external audio device is output through this instrument, you can cancel or lower the volume of the melody part of stereo playback with this function, and play the melody part yourself. 35 Selecting a Reverb Type ................................................35 Selecting a Chorus Type ................................................35 Pitch Controls—Transpose ............................................36 Pitch Controls—Fine Tuning ..........................................36 Pitch Controls—the PITCH BEND wheel .......................36 Calling Up Optimum Panel Settings —One Touch Setting (OTS).......................................36 Changing the Touch Response of the Keyboard ...........37 Selecting an EQ Setting for the Best Sound ..................37 Scale Tuning 38 Selecting Scale ..............................................................38 Setting the Base Note for Each Scale ............................38 Tuning Each Note to Create an Original Scale ..............39 Voice Settings 40 Selecting a Dual Voice ...................................................40 Selecting a Split Voice ...................................................40 Voice Editing ..................................................................40 Parameters Assigned to the Knobs 41 Arpeggio Settings 43 Synchronizing an Arpeggio to Song/Style/Pattern Playback—Arpeggio Quantize ...................................43 Holding the Arpeggio Playback via the Footswitch ........43 Styles (Auto Accompaniment) and Patterns Song Settings 50 BGM (Background Music) Playback ..............................50 Random Song Playback ................................................50 Tempo Setting of the Song ............................................51 Tap Start ........................................................................51 Song Volume .................................................................51 Melody Voice Setting of the Preset Song ......................51 The Functions 52 Basic Procedure in the Function Display .......................52 USB Flash Memory Operations 56 Connecting a USB Flash Memory..................................57 Formatting a USB Flash Memory...................................58 Saving User Data to a USB Flash Memory....................59 Saving a User Song as SMF to a USB Flash Memory...60 Loading User Data from a USB Flash Memory..............60 Loading a Style File .......................................................61 Deleting a User File in the USB Flash Memory..............62 Deleting a SMF File in the USB Flash Memory..............62 Exiting from a File Control display..................................63 Appendix 44 Troubleshooting ............................................................. 64 Specifications................................................................. 65 Index .............................................................................. 66 Reference Style Variations—Sections .............................................44 Synchro Stop..................................................................45 Turning Each Track Of Style On/Off...............................45 Pattern Variations—Sections .........................................46 Pattern Retrigger Function .............................................46 Changing the Tempo......................................................46 Tap Start ........................................................................46 Setting Up Handy Performance Features Adjusting the Volume of the Style or Pattern .................47 Setting the Split Point.....................................................47 Playing Chords Without Style Playback .........................47 Chord Types for Style Playback.....................................48 Looking Up Chords Using the Chord Dictionary ............49 Quick Guide Reference Page 23 Create New Sounds Page 22 The auto-accompaniment Styles provide the equivalent of a full backing band covering a wide variety of music genres. Select a Style that matches the music you want to play, or experiment with new Styles to expand your musical horizons. By adjusting just two knobs you can add varying degrees of distortion, or other characteristics to the sound to enhance it subtly or change it dramatically. Try playing like a DJ by using the Patterns! Page 24 The Pattern function lets you perform like a DJ. Use the Track Control to try out various instrument combinations, and play with the Knobs to create various new sounds. Appendix Play Along with Styles EuTrance 049 PSR-E443 Owner’s Manual 7 Compatible Format and Functions Setting Up GM System Level 1 “GM System Level 1” is an addition to the MIDI standard which ensures that any GM-compatible music data can be accurately played by any GM-compatible tone generator, regardless of manufacturer. The GM mark is affixed to all software and hardware products that support GM System Level. XGlite As its name implies, “XGlite” is a simplified version of Yamaha’s high-quality XG tone generation format. Naturally, you can play back any XG song data using an XGlite tone generator. However, keep in mind that some songs may play back differently compared to the original data, due to the reduced set of control parameters and effects. USB USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with peripheral Devices. It allows “hot swapping” (connecting peripheral devices while the power to the computer is on). STYLE FILE The Style File Format is Yamaha’s original style file format which uses a unique conversion system to provide high-quality automatic accompaniment based on a wide range of chord types. About audio files This instrument does not feature audio file playback or audio recording. Also, audio signals created via your keyboard performance cannot be transferred to the computer or iPad/iPhone even if one of them is connected to the USB [TO HOST] terminal of this instrument. Included Accessories • Owner’s Manual (this book) • Data List • AC Power Adaptor*1 • Music Rest • Online Member Product Registration*2 *1: May not be included depending on your particular locale. Check with your Yamaha dealer. *2: The PRODUCT ID on the sheet will be needed when you fill out the User Registration form. Music Rest Insert the music rest into the slots as shown. 8 PSR-E443 Owner’s Manual About the Manuals Setting Up This instrument has the following documents and instructional materials.  Included Documents Owner’s Manual (this book) • Setting Up Please read this section first. • Quick Guide This section explains how to use the basic functions. Refer to this section while playing the instrument. • Reference This section explains how to make detailed settings for the various functions of the instrument. • Appendix This section includes troubleshooting information and specifications. Data List Contains various important preset content lists such as those of Voices, Styles, Patterns and Effects.  Online Materials (from Yamaha Downloads) MIDI Reference Contains MIDI related information such as MIDI Data Format and the MIDI Implementation Chart. MIDI Basics (only in English, French, German and Spanish) Contains basic explanations about MIDI. Computer-related Operations Includes instructions on connecting this instrument to a computer, and operations related to transferring song data. iPhone/iPad Connection Manual Explains how to connect the instrument to smart devices, such iPhone, iPad, etc. To obtain these manuals, access the Yamaha Downloads. Select your country, enter “PSR-E443” to the Model Name box, then click [SEARCH]. Yamaha Downloads http://download.yamaha.com/ Online Materials (for Yamaha Online members) Song Book (only in English, French, German, Spanish and Japanese) Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument and the optional Songs Song Data Contains the data of 70 Songs that can be played back with this instrument and/or used for the Song Lesson (Page 27). After completing the user registration at the website below, you can download the Song Book and the Song Data free of charge. Yamaha Online Member https://member.yamaha.com/ You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this manual in order to fill out the User Registration form. * The downloaded Song data can be played back by transferring data from the computer to the instrument or saving data to the USB flash memory. For instructions on Song playback, refer to “Selecting and Playing Back a Song” on page 25. PSR-E443 Owner’s Manual 9 Panel Controls and Terminals Setting Up Display (page 16) Front Panel Setting Up GrandPno 001 t y u i o !0 !2 !1 001 !3 q e !4 !5 r @5 w 036 (C1) 048 (C2) 060 (C3) As illustrated above, each note of the keyboard has a specific note number and name (e.g., 036/C1), which is used in making various settings, such as Split Point. Front Panel q w e r t y u i o !0 !1 !2 10 [MASTER VOLUME] control ................Page 15 PITCH BEND wheel..............................Page 36 [ ] (Standby/On) switch ....................Page 15 LIVE CONTROL section [ASSIGN] button ...............................Page 22 [A] and [B] knobs .............................Page 22 [DEMO] button......................................Page 25 [LESSON] button..................................Page 27 [REC] button .........................................Page 30 [METRONOME] button.........................Page 19 [TEMPO/TAP] button............................Page 46 [TRANSPOSE] button ..........................Page 36 [MELODY SUPPRESSOR] button........Page 29 [PORTABLE GRAND] button ...............Page 17 PSR-E443 Owner’s Manual !3 VOICE CONTROL section [SPLIT] button................................... Page 18 [DUAL] button ................................... Page 18 [HARMONY] button ..........................Page 20 [ARPEGGIO] button..........................Page 21 !4 Playback Control buttons • When the [PATTERN] lamp is turned on: ................................ Pages 24 and 46 • When the [SONG] lamp is turned on: ..............................................Page 26 • When the [STYLE] lamp is turned on: ......................... Pages 23, 44, and 45 072 (C4) Panel Controls and Terminals Style List (Data List) Voice List (Data List) Setting Up Dial (page 15) Pattern List (Data List) Song List (Data List) !6 !7 !8 !9 @0 @2 @1 @4 “Press & Hold” symbol By holding down one of the buttons having this symbol, you can call up an alternate function, other than the one called up when simply pressing. @3 Rear Panel 084 (C5) 096 (C6) @6 @8 @9 #0 • When the [PATTERN] lamp is turned on: ..............................................Page 24 @4 Number buttons [1]–[9], [-/NO], [0/EXECUTE] and [+/YES] buttons ..... Page 15 @5 Drum illustrations for the Drum Kit.... Page 17 • When the [SONG] lamp is turned on: ..............................................Page 26 These indicate the drum or percussion instrument assigned to the corresponding keys (in the case of “Standard Kit 1,” shown in the Drum Kit List of the separate Data List). !5 [TRACK CONTROL] buttons !6 !7 !8 !9 @0 @1 @2 @3 @7 • When the [STYLE] lamp is turned on: ..............................................Page 45 [PATTERN] button ................................Page 24 [SONG] button ......................................Page 25 [STYLE] button .....................................Page 23 [VOICE] button .....................................Page 17 [MUSIC DATABASE] button .................Page 23 [CATEGORY] buttons...........................Page 15 [REGIST MEMORY] buttons ................Page 33 [FUNCTION] button ..............................Page 52 Rear Panel @6 USB [TO HOST] terminal*....................Page 54 USB [TO DEVICE] terminal .................Page 56 @7 [SUSTAIN] jack ..................................... Page 14 @8 [AUX IN] jack ........................................Page 29 @9 [PHONES/OUTPUT] jack ..................... Page 14 #0 Power supply jack................................ Page 12 * For connecting to a computer. For details, refer to “Computerrelated Operations” (page 9). When connecting, use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used. PSR-E443 Owner’s Manual 11 Setting Up  Notice for the AC adaptor Power Requirements Setting Up Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete resources. Using an AC Power Adaptor 1 Make sure that the power of the instrument is off (display is blank, except for notation staff). Depending on your particular locale, the AC adaptor having a separable plug should be used. In this case, make sure to follow the explanations below for your safety. If the plug is accidentally removed from the AC adaptor Without touching the metallic section, slide the plug into place as shown below then push it in completely until you hear the click sound. WARNING • Use the specified adaptor (page 65) only. Using the wrong adaptor can result in damage to the instrument or overheating. Slide the plug as indicated. • This adaptor is for indoor use only. Do not expose the instrument to rain, use it near water or in damp or wet conditions, or use it to hold any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. 2 Connect the AC adaptor to the power supply jack. 3 Plug the AC adaptor into an AC outlet. CAUTION • When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. 2 AC power adaptor 12 PSR-E443 Owner’s Manual 3 AC outlet The shape of the plug differs depending on locale. WARNING • Make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire. • Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug. Setting Up This instrument requires six “AA” size, Alkaline (LR6)/Manganese (R6) batteries, or rechargeable nickel-metal hydride batteries (rechargeable Ni-MH batteries). The Alkaline batteries or rechargeable NiMH batteries are recommended for this instrument, since other types may result in poorer battery performance. WARNING • When using Ni-MH batteries, follow the instructions that came with the batteries. Use only the specified charger device when charging. NOTE • This instrument cannot charge the batteries. Use only the specified charger device when charging. Setting Up Using Batteries • Power will be automatically drawn from the AC adaptor if an AC adaptor is connected while batteries are installed in the instrument.  Setting the battery type After installing the new batteries then turning the power on, make sure to set the Battery Type to Rechargeable type or not. For details, refer to page 55. NOTICE • Failure to set the Battery Type may shorten the amount of the battery life. Make sure to set the Battery Type correctly.  Installing the batteries 1 Make sure that the power of the instrument is off (display is blank, except for notation staff). 2 Open the battery compartment cover located on the instrument’s bottom panel.  Checking the power status on the display  Power source on the display You can confirm the power source at the left corner of the display. Only one of these is shown. 3 Insert the six new batteries, being careful to follow the polarity markings on the inside of the compartment. GrandPno When is shown, the power is supplied from the AC power adaptor. When is shown, the power is supplied from the batteries. When the AC power adaptor is connected with the batteries installed, the power is supplied from the AC power adaptor and the indication is shown.  Remaining battery power indication You can confirm the approximate amount of remaining battery power at the top left of the display. 4 Replace the compartment cover, making sure that it locks firmly in place. Indicates that the power will be turned off immediately. When rechargeable batteries are used, this icon flashes before the power is turned off. NOTICE • Connecting or disconnecting the power adaptor with batteries installed may turn the power off, resulting in loss of data being recorded or transferred at the time. When battery power becomes too low for proper operation, the volume may be reduced, the sound may be distorted, and other problems may occur. When this happens, make sure to replace all batteries with new ones or already-recharged ones. Indicates that remaining power is insufficient for operation. Before the power runs out, replace all the batteries with new ones, or fully recharged ones (when using rechargeable types). Note that the instrument may not work properly, including unusually soft volume and poor sound quality when remaining power becomes low. Indicates that the remaining power is sufficient. PSR-E443 Owner’s Manual 13 Setting Up Setting Up Connecting Headphones or External Audio Equipment Any pair of stereo headphones with a 1/4” stereo phone plug can be plugged in here for convenient monitoring. The speakers are automatically shut off when a plug is inserted into this jack. The [PHONES/OUTPUT] jack also functions as an external output. You can connect the [PHONES/OUTPUT] jack to a computer, keyboard amplifier, stereo system, mixer, tape recorder, or other line-level audio device to send the instrument’s output signal to that device. CAUTION • Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. • Before connecting the instrument to other electronic components, set all volume levels to the minimum, then turn off the power for all components. NOTICE • When the instrument’s sound is output to an external device, first turn on the power to the instrument, then to the external device. Reverse this order when you turn the power off. 14 PSR-E443 Owner’s Manual Connecting a Footswitch to the [SUSTAIN] jack You can produce a natural sustain as you play by pressing an optional Footswitch plugged into the [SUSTAIN] jack. Make sure that the footswitch plug is properly connected to the [SUSTAIN] jack before turning on the power. NOTE • The sustain function does not affect split voices (page 18). • Do not press the footswitch while turning the power on. Doing this changes the recognized polarity of the footswitch, resulting in reversed footswitch operation. Basic Operations Turn down the MASTER VOLUME control to “MIN” then press the [ ] (Standby/On) switch to turn on the power. While playing the keyboard, adjust the MASTER VOLUME control. To turn off the power, press the [ ] (Standby/On) switch again for a second. • When the instrument is not operated for a specified period of time while connected to an external device such as an amplifier, speaker or computer, make sure to follow the instructions in the Owner’s Manual to turn off the power to the instrument and the connected devices, in order to protect the devices from damage. If you do not want the power to turn off automatically when a device is connected, disable Auto Power Off. Setting Up Turning the Power On/Off Selecting Operations CAUTION • When using a power adaptor, even when the power is off, a small amount of electricity is still being consumed by the instrument. When you are not using the instrument for a long time, make sure to unplug the AC power adaptor from the wall AC outlet. Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for a specified period of time. The amount of time that will elapse before the power is automatically turned off is set by default to 30 minutes.  To disable the Auto Power Off function: Turn off the power, then press the [ ] (Standby/On) switch to turn on the power while holding down the lowest key. You can set the time that elapses before Auto Power Off is executed. For details, refer to the Function List (page 55). NOTE • Generally, the data and settings are maintained even when the power is turned off. For details, see page 34. NOTICE • Depending on the instrument status, the power may not turn off automatically, even after the elapse of the specified period of time. Always turn off the power manually when the instrument is not in use. Before operating the instrument, it may be helpful to familiarize yourself with the basic controls below that are used to select items and change values.  Dial Decrease Increase Rotate the dial clockwise to increase the value, or counterclockwise to decrease the value.  Number buttons Use the Number buttons to directly enter an item or value. For numbers that start with one or two zeroes, the first zeroes can be omitted. Example: Selecting Voice 003, Bright Piano. Press number buttons [0], [0], [3].  [-/NO] and [+/YES] buttons Press the [+/YES] button briefly to increase the value by 1, or press the [-/NO] button briefly to decrease the value by 1. Press and hold either button to continuously increase or decrease the value in the corresponding direction. Press briefly to decrease. Press briefly to increase.  CATEGORY buttons Use these buttons to jump to the first Voice, Style, or Song in the next or previous Category, and call up the next or previous Function sequentially. In most procedures described throughout this owner’s manual the dial is recommended for selection simply because it is the easiest and most intuitive selection method. Please note however, that most items or values that can be selected using the dial can also be selected using the [+/YES] and [-/NO] buttons. PSR-E443 Owner’s Manual 15 Display Items The display shows all the current settings of the Song, Style Pattern, Voice and other related functions. Setting Up Power source status Indicates the source from which this instrument obtains power, AC power adaptor or batteries. (Page 13) USB connection status Appears when USB flash memory is connected to this instrument. (Page 56) Notation Normally this indicates the notes you play. When the Song Lesson function is used, this indicates the current notes and chord of playback. When the Dictionary function is used, this indicates the notes of the chord you specify. NOTE • Any notes occurring below or above the staff are indicated by “8va.” • For a few specific chords, not all notes may be shown, due to space limitations in the display. GrandPno 001 On/off status This area indicates the on/off status of each function. Each indication is shown when the corresponding function is turned on. Page 18 001 Beat Indicates the current beat of playback. (Page 25) Knob assignment Indicates the parameters currently assigned to the Knobs. (Page 22) Page 18 Page 20 Page 21 Page 37 Page 23 Page 45 Page 38 Page 29 16 PSR-E443 Owner’s Manual FUNCTION and MEASURE Indicates the Function number when the [FUNCTION] button is pressed, or the current Measure number during playback of a Song, Style or Pattern. Chord Indicates the chord which is being played on the keyboard (Page 23) or specified via Song playback. Track status Indicates the on/off status of the current Song, Style or Pattern. (Pages 24, 30, 45) 001 Try Playing a Variety of Instrument Voices Quick Guide In addition to piano, organ, and other “standard” keyboard instruments, this instrument has a large range of voices that includes guitar, bass, strings, sax, trumpet, drums and percussion, and even sound effects—giving you a wide variety of musical sounds. Selecting a Main Voice 1 Press the [VOICE] button. The Voice number and name will be shown. For details, refer to the front panel or the Voice List of the separate Data List. Playing the “Grand Piano” When you want to reset various settings to default and simply play a Piano sound, press the [PORTABLE GRAND] button. Voice name 001 The Voice number is set to 001 Grand Piano and the settings such as Dual and Split are turned off automatically. Quick Guide GrandPno Voice number Appears after the [VOICE] button is pressed. 2 Use the dial to select the desired Voice. Flute 134 Select 134 Flute 3 Play the keyboard. Preset Voice Types 001–234 Instrument Voices. 235–258 (Drum Kit) Various drum and percussion sounds are assigned to individual keys. Details on assigning instruments to keys are provided in the Drum Kit List of the separate Data List. 259–298 Used for arpeggio performance (page 21). 299–755 XGlite Voices. 000 Selecting this automatically calls up the most suitable Voice for the current Style, Song or Pattern. For details, see page 36. PSR-E443 Owner’s Manual 17 Try Playing a Variety of Instrument Voices Layering a Dual Voice In addition to the Main Voice, you can layer a different Voice over the entire keyboard as a “Dual Voice.” 1 Press the [DUAL] button to turn Dual on. Flute 134 Playing a Split Voice in the Left Hand area By dividing the keyboard into the two separate areas, you can play a different Voice between the Left hand and Right hand areas. 1 Press the [SPLIT] button to turn on Split. The keyboard is divided into the Left hand and Right hand areas. Appears when dual voice is on Flute Quick Guide 134 Appears when split voice is on Two voices will sound at the same time. 2 Split Point ... default value: 054 (F#2) Press the [DUAL] button again to exit from Dual. Although turning on Dual will select a Dual Voice suitable for the current Main Voice, you can easily select a different Dual Voice (page 40). 036 (C1) 048 (C2) Split voice 060 (C3) 072 (C4) 084 (C5) 096 (C6) Main voice and dual voice You can play a “Split Voice” on the Left hand area of the keyboard while playing a Main Voice and Dual Voice on the Right hand area of the keyboard. The highest key for the Left hand area is referred to as the “Split Point” which can be changed from the default F#2 key. For details, refer to page 47. 2 Press the [SPLIT] button again to exit from Split. You can easily select a different Split Voice (page 40). 18 PSR-E443 Owner’s Manual Try Playing a Variety of Instrument Voices 2 The instrument features a built-in metronome (a device that keeps an accurate tempo), convenient for practicing. 1 NOTE Press the [METRONOME] button to start the metronome. • This parameter cannot be set during playback of a Style, Song or Pattern. 3 2 Rotate the dial to select the number of beats per measure. A chime will sound on the first beat of each measure while the other beats will click. If “0” is selected, all beats will simply click with no chime. Select 5 for this example. Press the [METRONOME] button again to stop the metronome. Press the CATEGORY [+] button to call up “TimeSigD” (Time Signature Denominator). The length of one beat is shown on the display. TimeSigD 04 Adjusting the Metronome Tempo 1 Press the [TEMPO/TAP] button to call up “Tempo.” 4 Rotate the dial to select the length of one beat, from 2nd, 4th, 8th and 16th note. Select “08” (8th note) for this example. 5 Confirm the setting by playing the Metronome. Tempo 090 The length of one beat. Current Tempo value 2 Adjust the Tempo value by rotating the dial. Setting the Metronome Volume 1 Press the [FUNCTION] button. 2 Press the CATEGORY [+] or [-] buttons repeatedly until “MtrVol” (Function 068) appears. Setting the Time Signature Here, we’ll set a time signature of 5/8 as an example. 1 Hold down the [METRONOME] button for longer than a second to call up “TimeSigN” (Time Signature Numerator). The number of beats per measure is shown on the display. MtrVol 100 TimeSigN Hold for longer than a second. 04 Number of beats per measure. 068 Metronome volume 3 Rotate the dial to set the Metronome Volume. PSR-E443 Owner’s Manual 19 Quick Guide Using the Metronome Try Playing a Variety of Instrument Voices Adding Harmony 3 Rotate the dial to select the desired Harmony Type. For details, refer to the Effect Type List of the separate Data List. The effect and operation differs depending on the Harmony Type. Refer to “How to sound each Harmony Type” below. 4 Press the [HARMONY] button again to turn Harmony off. You can add harmony notes to the Main Voice. 1 Press the [HARMONY] button to turn Harmony on. Appears when the Harmony is turned on. Although turning on the Harmony will select a Harmony Type suitable for the current Main Voice, you can select a different Harmony Type. How to sound each Harmony Type • Harmony type 01 to 05 Quick Guide 2 Hold down the [HARMONY] button for longer than a second until “HarmType” appears on the display. After “HarmType” is shown for a few seconds, the current Harmony Type appears. Press the right-hand keys while playing chords in the auto accompaniment range of the keyboard when the Auto Accompaniment is on (page 23). • Harmony type 06 to 12 (Trill) HarmType 039 Hold down two keys. Hold for longer than a second. • Harmony type 13 to 19 (Tremolo) Trio 02 Current Harmony Type 039 Keep holding down the keys. • Harmony type 20 to 26 (Echo) Play the keys. Adjusting the Harmony Volume You can adjust the Harmony Volume in the Function Settings (page 53). 20 PSR-E443 Owner’s Manual Creating Arpeggios The Arpeggio function lets you create arpeggios (broken chords) by simply pressing the notes of the chord. For example, you could play the notes of a triad—the root, third, and fifth—to trigger interesting phrases. This feature can be used for music production as well as performance. 1 Press the [ARPEGGIO] button to turn on the Arpeggio function. RS Sync1 Changing the Arpeggio Type The most suitable Arpeggio Type is automatically selected when you select a Main Voice, but you can easily select any other Arpeggio Type. 1 150 Hold down the ARPEGGIO [TYPE] button for longer than a second. In the display, “ARP Type” appears for a few seconds, followed by the current Arpeggio Type appears. Quick Guide Triggering the Arpeggio NOTE • Selecting a Voice number between 259 and 298 will turn on Arpeggio automatically. 2 Press a note or notes to trigger Arpeggio. The Arpeggio phrase differs depending on the number of pressed notes and the area of the keyboard. SynArp1 Hold for longer than a second. 2 004 The currently selected arpeggio type Rotate the dial to select the desired Arpeggio type An Arpeggio Type List is provided in the separate Data List. When Split is on, Arpeggio is applied only to the Split Voice. When Split is off, Arpeggio is applied to the Main and Dual Voices. Arpeggio cannot be applied to the Split and Main/Dual Voices simultaneously. NOTE • Selecting a Voice number between 289 and 298 will turn on Split automatically, as well as Arpeggio. When one of those Voices is selected, Arpeggio is triggered only by playing a key to the left of the Split Point. • When an optional Footswitch (page 14) connected to the SUSTAIN jack is pressed, the Arpeggio will continue to play after the note is released (page 43). 3 To turn off the Arpeggio, press the [ARPEGGIO] button again. PSR-E443 Owner’s Manual 21 Creating Original Sounds via the Knobs The two knobs located in the lower left area of the panel can be used to add variations to the sound being played, transforming the sound in a variety of musical ways. Select the desired pre-programmed effect combination printed above the Knobs, then rotate the Knobs to enjoy the sound. Selecting a Knob Effect Combination Repeatedly press the [ASSIGN] button to sequentially select the five effect combinations provided: (1)  (2)  (3)  (4)  (5)  (6)  (1) … etc. The current combination is shown in the display. Applying the Filter to the Main Voice Quick Guide 1 Select the desired Main Voice. Here, select “Voice No.153 SquareLd” (Square Lead) as a synth-lead type Voice. 2 Press the [ASSIGN] button several times until (1) (Filter) appears in the display. 3 Rotate Knob B all the way to the right (maximum), then play the keyboard with your right hand while operating Knob A with your left. GrandPno 001 Filter Cutoff Filter Resonance 001 Current value The target sound differs depending on the effect combination (selected number). Effect Combination 1 FILTER 2 EFFECT 3 EG 4 STYLE FILTER Target Sound and Function Controls the sound of the Main Voice and Dual Voice. Controls the sound of the Style (page 23) or Pattern (page 24) Controls mainly audio sound coming from an external audio device connected to the AUX IN jack. 5 AUX IN * Knob B can be used to control the volume of Style/ Song/Pattern sound with the keyboard sound maintained, even if an external audio device is not connected. 6 SPECIAL EFFECT Knob A controls the entire sound while Knob B controls only the Pattern sound. For details about each Knob effect, refer to page 41. NOTE • Only selecting a Knob effect combination will not affect the sound even if the Knob arrow is not at the initial position. After operating the Knob, the selected effect is applied to the sound. 22 PSR-E443 Owner’s Manual NOTICE • When z or x or c appears in the display by pressing [ASSIGN] button, selecting a different Voice will replace the settings created via the Knobs with the default settings of the new Voice. If you create a sound with the Knobs that you wish to keep, make sure to memorize the settings to Registration Memory (page 33) before selecting a different Voice. NOTE • Rotating a Knob to the right while the volume is set to a high level may result in distortion. If this occurs, reduce the volume level. Playing Styles This instrument includes the Auto Accompaniment feature that plays appropriate “Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety of Styles covering a wide range of musical genres. 1 Press the [STYLE] button, then use the dial to select the desired Style. The Style List is provided on the front panel, or in the Data List (page 9). For information about chords, refer to “Chord List” (page 48) or use the Chord Dictionary function (page 49). Split Point Style Name BritRock 5 Style Number This icon appears when a style number and name is displayed. 2 Press the [ACMP ON/OFF] button to turn on the Auto Accompaniment. You can add intro, ending and rhythm variations to Style playback by using “Sections.” For details, refer to page 44. EuTrance 049 This icon appears when automatic accompaniment is on. With this operation, the area of the keyboard to the left of the Split Point (054: F#2) becomes the “Auto Accompaniment range” and is used only for specifying the chords. Split Point (page 47) Using the Music Database If you have difficulty finding and selecting the desired Style and Voice, use this feature. From the Music Database, just selecting the favorite music genre calls up the ideal settings. 1 036 (C1) 048 (C2) 060 (C3) 072 (C4) 084 (C5) 096 (C6) Jude Hey 001 Press the [SYNC START] button to turn Synchro Start on. EuTrance 049 2 Use the dial to select the desired Music Database. This operation calls up the panel settings such as Voice and Style that are registered to the selected Music Database. The Music Database List is provided in the Data List (page 9). 3 Play the keyboard as described in Steps 4–5 above. Flashes when sync start is on. 4 Press the [MUSIC DATABASE] button. Both the Auto Accompaniment and Synchro Start are automatically turned on. Music Database name Auto Accompaniment range 3 Press the [START/STOP] button to stop playback. Quick Guide 001 Play a chord in the Auto Accompaniment range to start playback. Play a melody with the right hand and chords with the left hand. PSR-E443 Owner’s Manual 23 Playing with Patterns Like a DJ! The Pattern playback function lets you repeatedly play various rhythm patterns, and is particularly effective in Hip-Hop, House music, etc. Try out the cool DJ-like performance features—changing keys in the left-hand area of the keyboard and rotating the Knobs for dynamic sound variations. 1  Using Retrigger function (page 46) Pressing the button of the currently playing Section restarts playback from the beginning. Holding down the button lets you loop-play only the top portion of the Section. Press the [PATTERN] button, then use the dial to select the desired Pattern. The ACMP is turned on, and the keyboard is divided into the accompaniment area (page 23) and melody area. FrenchDJ 001 Quick Guide  Transposing playback by pressing any note to the left of the Split Point (page 47) Unlike with the Styles, only the Root can be specified; the Chord Type cannot be specified. Flashes 2 Press the [START/STOP] button or press any key to left of the Split Point (page 47) to start Pattern playback. Split Point SECT B Split Point Specified key  Changing the sound via the Knobs Press the [ASSIGN] button several times to select “4 STYLE FILTER” then rotate the Knobs A and B. During Pattern playback, enjoy creating sound variations via the following operations.  Turning on/off individual tracks via the [TRACK CONTROL] buttons  Applying the Arpeggio to the right-hand area Press the [ARPEGGIO] button to turn it on, then press the notes in the right-hand area of the keyboard. On/off status is shown in the display (page 16) NOTE • Up to two Track buttons can be pressed simultaneously for turning on or off. NOTE • When you select a Voice between 289 and 298, Arpeggio is applied only to the Split Voice. Playing a key to the left of the Split Point turns Arpeggio on as well as specifies the key for Pattern playback.  Changing the Pattern Section via the [A]–[E] buttons 3 SECT B 24 PSR-E443 Owner’s Manual Press the [START/STOP] button to stop playback. Playing Songs You can simply enjoy listening to the internal Songs, or use them with just about any of the functions, such as Lesson.  Song Category The Songs are organized by category as listed below. • • • • • • • • Gives you an idea of the advanced capabilities of this instrument. Demonstrates many useful Voices of this instrument. These piano solo pieces are ideally suited for the Song Lesson. These piano ensemble pieces are also well suited for the Song Lesson. When you need to practice backing (accompaniment) patterns, these songs are ideal for that purpose. Songs you record yourself. FLASH MEMORY: Songs transferred from a computer. USB: Songs in the USB flash memory. Quick Guide These songs are shown in the display in the following sequence: Songs transferred from a computer, Songs in the USB flash memory. To transfer Songs from a computer to this instrument, refer to “Computer-related Operations” (page 9). For Songs in USB flash memory, refer to page 58. About audio files Among Song formats, only MIDI files can be played back by this instrument. Audio files cannot be played back (or shown as Song numbers), even if they are saved in the USB flash memory connected to the USB [TO DEVICE] terminal. NOTE • In addition to the 30 Preset Songs in this instrument, you can enjoy Optional Songs downloadable from the Yamaha website. For details, refer to page 9. • When you transfer a Song from a computer while the USB flash memory is connected to the USB [TO DEVICE] terminal, the transferred Song will be inserted before the first USB Song number, moving all USB Song numbers later in sequence. Listening to a Demo Song Press the [DEMO] button to play Songs in sequence. Playback will repeat continuously, starting again from the first Song (001). Jeanie 013 To stop playback, press the [DEMO/BGM] or [START/STOP] button. Current Song 2 Selecting and Playing Back a Song 1 Press the [SONG] button, then use the dial to select the desired Song. Refer to the Song List in the Data List (page 9). You can select User Songs, Songs transferred from a computer, and Songs in USB flash memory in the same way as above. Press the [ ] (Start/Stop) button to start playback. To stop playback, press the [ ] (Start/Stop) button again. Jeanie 013 Each arrow mark flashes in time with the beat. NOTE • External MIDI Songs containing the Portamento Control and Scale Tune settings may not be played correctly. PSR-E443 Owner’s Manual 25 Playing Songs Song Fast Forward, Fast Reverse, and Pause Like the transport controls on an audio player, this instrument lets you fast forward [ ] (Fast Forward), rewind [ ] (Fast Reverse) and pause [ ] (PAUSE) playback of the Song. Fast Forward During playback, press this button to rapidly skip ahead to a later point in the Song. 3 When playback reaches to the point you want to specify as the end point, press the [ ] (A-B REPEAT) button again to set the B point. The specified A-B section of the song will now play repeatedly. 4 To cancel repeat playback, press the [ ] (A-B REPEAT) button again. To stop playback, press the [START/STOP] button. NOTE • If you want to set the start point “A” at the top of the Song, press the [ ] (A-B REPEAT) button before starting playback. Quick Guide Turning Each Track On/Off Fast Reverse During playback, press this button to rapidly return to an earlier point in the Song. Pause During playback, press this button to pause playback, and press again to start from that point. Each “track” of a Song plays a different part—melody, percussion, accompaniment, etc. Each of the tracks can be muted so that you can play the muted part yourself. Pressing the desired Track button repeatedly will toggle the on/off status. NOTE • When the A-B repeat is specified, the Fast Reverse and Fast Forward will only work within the range between A and B. • [REW], [FF] and [PAUSE] button cannot be used during Song playback by using the [DEMO] button. Track number on—Track will playback A-B Repeat You can play back only a specific section of a Song repeatedly by setting the A point (start point) and B point (end point) in one-measure increments. A 1 2 26 B Start playback of the Song (page 25). When playback reaches to the point you want to specify as the start point, press the [ ] (A-B REPEAT) button to set the A point. PSR-E443 Owner’s Manual Track number off—Track is muted or contains no data NOTE • Up to two Track buttons can be pressed simultaneously for turning on or off. Using the Song Lesson Feature You can use the selected Song for a left-hand, right-hand, or both-hands lesson. Try practicing with these three Song Lesson types while referring to the music scores in the Song Book (page 9). Three Types of Song Lesson Practicing with Song Lesson 1 Lesson 1—Listen Select the desired Song for your lesson (page 25). NOTE In this Lesson, you need not play the keyboard. The model melody/chords of the part you selected will sound. Listen to it carefully and remember it well. • The Song Lesson can be applied to Songs downloaded at the Yamaha website (page 9), Songs transferred from a computer, and Songs in USB flash memory (SMF format 0 only). However, some of the Lesson functions may not be applied to some Songs due to the structure of the Song data. LISTEN Lesson 2—Timing 2 In this mode, simply concentrate on playing the notes with the correct timing. Even if you play wrong notes, the correct notes shown in the display will sound TIMING Quick Guide • The Song Lesson cannot be applied to the User Songs. Turn off the part you want to practice. For the right-hand lesson, press the [1/RIGHT] button to turn off the right-hand part. For the lefthand lesson, press the [2/LEFT] button to turn off the left-hand part. For the lesson using both hands, turn off both the parts. Lesson 3—Waiting In this Lesson, try playing the correct notes shown on the display. The Song pauses until you play the right note, and playback tempo will change to match the speed at which you are playing at. WAITING NOTE Pressing the [1/RIGHT] and [2/LEFT] buttons repeatedly will toggle the on/off status of each part, which can be shown on the display. ForElise 015 • If you want to keep a steady playback tempo is maintained during Lesson 3: Waiting, set the Your Tempo parameter (page 54) to OFF. 3 Right-hand lesson Track 1 is unlit Left-hand lesson Track 2 is unlit Both-hands lesson Track 1 and 2 are unlit Press the [LESSON] button to start playback of the Song Lesson. After starting playback, pressing the [LESSON] button repeatedly will change the Lesson number from 1: LISTEN  2: TIMING  3: WAITING  off  1…. Press this button until the desired number is shown on the display. PSR-E443 Owner’s Manual 27 Using the Song Lesson Feature TIMING Lp2 The notation and key positions you should play are shown. 007 Both-hands lesson 2 (TIMING) is indicated as shown. Righthand lesson 2 is indicated as “R2” and Left-hand lesson 2 is indicated as “L 2.” Making Practice Perfect—Repeat & Learn If you want to practice a specific section in which you made a mistake or you have difficulty with use the Repeat & Learn function. Press the [ ] (REPEAT & LEARN) button during a Lesson playback. To stop Lesson playback, press the [START/ STOP] button. Even during playback, you can change the Lesson number by pressing the [LESSON] button. Quick Guide 4 When Lesson playback reaches to the end, check your evaluation Grade on the display. “2 Timing” and “3 Waiting” will evaluate your performance in four levels: OK, Good, Very Good, or Excellent. See How You’ve Done Excellent Very Good Good OK ~~~~~~~~ ~~~~~~ ~~~~ ~~ When the lesson song has played all the way through your performance will be evaluated in 4 levels: OK, Good, Very Good, or Excellent. “Excellent!” is the highest evaluation. After the evaluation display has appeared, the lesson will start again from the beginning. 28 PSR-E443 Owner’s Manual The Song location will move back four measures, a one-measure count will play, then Song playback will start again. Playback of the four measures will repeat with a one-measure count-in. To exit from this status, press this button again. NOTE • You can change the amount of measures the Repeat & Learn function jumps back by pressing a number button [1]–[9] during repeat playback. Playing an External Audio Device with the Built-in Speakers You can output the sound of an external audio device, such as a portable music player, with the built-in speakers of this instrument by connecting it via a cable. This lets you play the keyboard along with playback of your music player. 1 Turn off the power for both the external audio device and this instrument. 6 Play the keyboard along with the sound of the audio device. 2 Connect the audio device to the instrument’s [AUX IN] jack. Use the cable which has the stereo-mini plug at one side for connecting to this instrument and the plug matching the output jack of the external audio device at the other side. 7 After finishing the performance, stop playback of the audio device. CAUTION Audio device (Portable audio player, etc.) Quick Guide • Before connecting, turn off the power of both this instrument and the external audio device. Also, before turning the power on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the devices, electrical shock, or even permanent hearing loss may occur. NOTICE • After connecting, first turn on the power to the external audio device then to this instrument. Reverse this order when you turn the power off. Stereo-mini plug Using the Melody Suppressor 3 Turn on the external audio device, then this instrument. 4 Play back the connected external audio device. The sound of the audio device is output through the speakers of this instrument. 5 Adjust the volume balance between the audio device and this instrument. Do this by adjusting both the volume of the audio device and this instrument itself. When the sound of an external audio device is output through this instrument, you can cancel or lower the volume of the melody part of stereo playback. You can use the function to cancel the melody part then practice it via the keyboard. 1 Play back the connected external audio device. 2 Press the [MELODY SUPPRESSOR] button to turn it on. NOTE • When you want to adjust the volume balance between the audio device and this instrument further, after the volume of each has been adjusted, press the [ASSIGN] button to call up b, then rotate the Knob B (page 41). The knob B can adjust only the volume of the audio device and Song/Style/Pattern playback sound. • When you want to adjust the volume balance more, even after having adjusted it with Knob B, adjust the volume of the audio device using the function of this instrument. Press the [FUNCTION] button, and hold down the CATEGORY [+] or [-] button until “AuxInVol” appears. Then, set the value of the volume with the dial. In case of adjusting the volume to more than 100, the audio device sound can become distorted. Indication is shown when this function is turned on. 3 Press the [ASSIGN] button to call up b. Then, adjust the pan position of the sound to be cancelled with Knob A (page 41). NOTE • Depending on the particular music source, the melody or vocal sound may not be cancelled as expected even if the Melody Suppressor is turned on. 4 Press the [MELODY SUPPRESSOR] button again to turn it off. PSR-E443 Owner’s Manual 29 Recording Your Performance You can record up to 10 of your performances as User Songs. The recorded User Songs can be played back on the instrument. NOTE • About audio files The Recording function of this instrument will record your keyboard performance as MIDI data. Note that audio recording is not available. NOTE Track Structure of a Song Quick Guide  Melody Tracks [1]–[5] The melody performance of the keyboard will be recorded.  Accompaniment Track [A] The chord progression (for the Style) or the key change (for the Pattern) will be recorded. • The ACMP on/off status cannot be changed after the [REC] button is pressed. 4 Start recording. • When you press the [SONG] button in Step 2, play any note to start recording. • When you select a Style in Step 2, play a chord in the Auto Accompaniment area to start recording with Style playback, or press the [START/STOP] button to start recording only with playback of the Rhythm part of a Style. • When you select a Pattern in Step 2, play a key in the Accompaniment area or press the [START/STOP] button to start recording with Pattern playback. Track 1 Track 2 Track 3 Track 4 Track 5 Accompaniment Track User 1 pEC Quick Recording Current measure number The operation is useful when you record a new Song from scratch. 1 Make the desired settings including the Main Voice selection. 2 Make the desired settings of your performance. The current measure will be shown on the display while recording. 5 • If you want to record only the melody performance, press the [SONG] button. Press the [START/STOP] or [REC] button to stop recording. When using a Style, you can stop recording also by pressing the [ENDING] button then waiting until playback ends. • If you want to record the performance using a Style, press the [Style] button. or • If you want to record the performance using a Pattern, press the [Pattern] button. 3 User 1 pEC 001 Flashes To exit from this status, press the [REC] button again. 30 After recording finishes, “Writing!” appears indicating that the recorded data will be stored, then the recorded track numbers in the display will light. Press the [REC] button to enter the Record Ready mode. If a User Song was not selected beforehand, this operation selects the lowest-numbered unrecorded User Song (from 031–040) as Recording target. Flashes PSR-E443 Owner’s Manual 003 NOTICE • Never attempt to turn the power off when “Writing!” is shown in the display. Doing so can damage the flash memory and result in a loss of data. 6 To play back the recorded Song, press the [START/STOP] button. NOTE • When recording Pattern playback with Retrigger Note that the beat indicator in the display, metronome and Arpeggio playback is not synchronized with playback of the recorded Song. Recording Your Performance  If you want to record only the Pattern playback: Press the [Pattern] button, then select the desired Pattern. While holding down the [REC] button, press the [6/A] button. ACMP is automatically turned on. Recording to a Specified Track The operation here is useful especially when you want to record the additional performances to an already recorded Song. Press the [SONG] button, then select the desired User Song (031–040) as the recording target. Press and hold User 1 User 1 031 pEC Song number 2 While holding down the [REC] button, press the desired Track button to enter the Record Ready mode.  If you want to record only the melody: While holding down the [REC] button, press one of the [1]–[5] buttons. Press and hold User 1 pEC 001 Track 1 will flash  If you want to record only the Style playback: Press the [STYLE] button, select the desired Style, then simultaneously hold down the [REC] button and press the [6/A] button. ACMP is automatically turned on. 3 001 Quick Guide 1 Same as in Steps 4 to 6 (page 30) in “Quick Recording.” NOTE • If the memory becomes full while recording, an alert message will appear and recording will stop automatically. In this case, delete unnecessary data by using the Clear functions (page 32), then execute the recording again. Limitations while recording • The on/off status of ACMP cannot be changed. • Playback cannot be changed between Style and Pattern. • The Pattern number can be changed while the Style number cannot. • When you use a Style/Pattern, the following parameters cannot be changed: Reverb Type, Chorus Type, Time Signature, Style number and Style/Pattern Volume. • Performance with a Split Voice cannot be recorded. • The sound of an external audio device (page 29) cannot be recorded. Press and hold User 1 pEC 001 PSR-E443 Owner’s Manual 31 Recording Your Performance Clearing a User Song You can clear all tracks of a User Song. 1 2 Press the [SONG] button, then select the User Song (031–040) to be cleared. Hold down the track [6/A] and [1] buttons simultaneously for longer than a second. A confirmation message will appear on the display. Clearing a Specified Track from a User Song This lets you clear individual tracks from a User Song. 1 Press the [SONG] button, then select the desired User Song (031–040). 2 From [1]–[5] and [6/A], press the Track button to be cleared for longer than a second. A confirmation message will appear on the display. Quick Guide Hold for longer than a second. ClrUser1 YES 3 4 32 Press the [+/YES] button. A confirmation message will appear on the display. To cancel this operation, press the [-] button. Press the [+/YES] button to clear the Song. A clear-in-progress message will appear briefly on the display. PSR-E443 Owner’s Manual ClrTr1 YES 3 Press the [+/YES] button. A confirmation message will appear on the display.To cancel this operation, press the [-] button. 4 Press the [+/YES] button to clear the track. A clear-in-progress message will appear briefly on the display. Memorizing Your Favorite Panel Settings This instrument has a Registration Memory feature that lets you memorize your favorite settings for easy recall whenever they’re needed. Up to 32 complete setups can be saved (eight banks of four setups each). 8 Banks Memory 1 Memory 2 Memory 3 Memory 4 Up to 32 presets (eight banks of four each) can be memorized. 1 Make the desired settings such as those for Voice, Style, and Pattern. 2 Press and release the [MEMORY/BANK] button to call up a Bank number on the display. Bank 1 Recalling Panel Settings from the Registration Memory 1 Press and release the [MEMORY/BANK] button to call up a Bank number on the display. 2 Use the dial or the [1]–[8] number buttons to select a Bank number. 3 Press one of the [1]–[4] buttons to call up the panel settings you memorized. The recalled REGIST MEMORY number appears in the display for a few seconds. Quick Guide Memorizing Panel Settings to the Registration Memory Bank number 3 Use the dial or the [1]–[8] number buttons to select a Bank number. REGIST 1 NOTE • Data cannot be saved to the Registration Memory during Song playback. 4 While holding down the [MEMORY/ BANK] button, press one of the [1]–[4] buttons to memorize the current panel settings. 1 NOTE • When the [SONG] lamp is lit, the Style or Pattern settings will not be recalled even if you press the Registration Memory button to which the Style or Pattern settings are memorized. To recall Style/Pattern settings, make sure to press the [STYLE] or [PATTERN] button. Parameters that can be memorized to Registration Memory  Style settings Press and hold Style number, ACMP on/off, Style volume, Track on/off  Pattern settings Pattern number, Pattern volume, Section, Track on/off Writing! NOTICE • If you select a Registration Memory number that already contains data, the previous data is deleted and overwritten by the new data. • Do not turn off the power while memorizing settings to the Registration Memory, otherwise the data may be damaged or lost.  Voice settings Main Voice settings: Voice number and all settings of the related Functions Dual Voice settings: Dual on/off and all settings of the related Functions Split Voice settings: Split on/off and all settings of the related Functions  Effect settings Reverb Type, Chorus Type  Arpeggio settings Arpeggio on/off and all settings of the related Functions  Harmony settings Harmony on/off and all settings of the related Functions  Other settings Transpose, Pitch Bend Range, Knob Effect Combination number, Split Point, Tempo, Scale Tune PSR-E443 Owner’s Manual 33 Using with a Computer or iPad/iPhone Connecting to a computer This instrument supports MIDI (Musical Instrument Digital Interface) and can transmit/receive keyboard performance information (MIDI messages) or Song/ Style data (MIDI files) to/from the computer connected via a USB cable. For details on using a computer with this instrument, refer to the “Computerrelated Operations” (page 9) on the website. USB terminal Data that can be transferred from a computer to this instrument (and vice versa). • Song: (.mid) SMF format 0/1 • Style: (.sty) • Backup File: PSR-E443.BUP * * Backup parameters can be transferred and saved to a computer via Musicsoft Downloader as a single Backup file. NOTE • This instrument can transfer/load up to a maximum of 256 Song files. USB terminal Connecting an iPad/iPhone computer instrument Quick Guide USB cable NOTE • If you transfer the Style file from the computer to this instrument, you need to register it to this instrument for Style playback. For details, refer to “Loading a Style File” (page 61). By connecting your iPad/iPhone to the instrument, you can take advantage of various functions. To make connections, prepare the optional i-UX1, then refer to the “iPhone/iPad Connection Manual” (page 9) on the website. About audio files Audio signals created via your keyboard performance cannot be transferred to a computer or iPad/iPhone even if such a device is connected to the USB [TO HOST] terminal of this instrument. This means that your keyboard performance, SONG/STYLE/ PATTERN cannot be recorded to a computer or iPad/iPhone as audio data. Backup and Initialization Backup Parameters The following Backup parameters will be maintained even if the power is turned off. Backup parameters • User Songs (page 30) • Style data transferred from a computer and loaded to Style numbers 201–205 (page 61) • Registration Memory (page 33) • FUNCTION Settings: (page 52) Tuning, Split Point, Touch Response, Style Volume, Song Volume, Pattern Volume, Metronome Volume, Grade, Demo Group, Demo Play Mode, Demo Cancel, Master EQ type, Your Tempo on/off, Auto Power Off setting, Battery Select, Language In addition to the Backup parameters above, all the data (including Style data that have not been loaded) transferred from the connected computer will be maintained even if you turn off the power. Backup Clear This operation initializes the backup parameters. While holding down the highest white key, press the [ ] (Standby/On) switch to turn the power on. Flash Clear This operation deletes all the Songs and Styles that have been transferred from a computer. Note that Style data registered to Style numbers 201–205 will be maintained. While simultaneously holding the highest white key and the three highest black keys, press the [ ] (Standby/ On) switch to turn the power on. Initialization NOTICE This function erases the Backup data described above, and then restores all the default factory settings. You can initialize your original data via the following two methods. 34 PSR-E443 Owner’s Manual • Keep in mind that this operation also deletes the data you have purchased. Be sure to save the important data to a computer via Musicsoft Downloader (MSD) software. For details, refer to “Computer-related Operations” (page 9). Handy Performance Features Reference Selecting a Reverb Type Selecting a Chorus Type The Reverb effect lets you play with a rich concert hall type ambience. Although selecting a Style or Song will call up the optimum Reverb type for the entire sound, you can select a different Reverb type manually. The Chorus effect creates a thick sound that is similar to many of the same Voices being played in unison. Although selecting a Style or Song will call up the optimum Chorus type for the entire sound, you can select a different Chorus type manually. 1 Press the [FUNCTION] button. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up “Reverb” (Function 035). After “Reverb” is shown for a few seconds, the current Reverb Type is shown. 2 Use the CATEGORY [+] and [-] buttons to call up “Chorus” (Function 036). After “Chorus” is shown for a few seconds, the current Chorus Type is shown. Reverb Chorus 035 036 Hall2 1 Current Reverb type Current Chorus type NOTE NOTE • Some Songs and Styles use Reverb Types which cannot be selected via panel operation. If such a Song or Style is played back, “- - -” is shown on the display. 3 Rotate the dial to select a Reverb type. Play the keyboard to check the sound. For information about the available Reverb types, refer to the Effect Type List in the Data List (page 9). Adjusting the Reverb depth You can adjust the Reverb depth applied to the Main, Dual, and Split Voices individually via the same operations above. Regarding the item in Step 2, refer to the Function List on page 52. 036 Reference 02 Chorus1 035 • Some Songs and Styles use Chorus Types which cannot be selected via panel operation. If such a Song or Style is played back, “- - -” is shown on the display. 3 Rotate the dial to select a Chorus type. Play the keyboard to check the sound. For information about the available Chorus types, refer to the Effect Type List in the Data List (page 9). Adjusting the Chorus depth You can adjust the Chorus depth applied to the Main, Dual, and Split Voices individually via the same operations above. Regarding the item in Step 2, refer to the Function List on page 52. PSR-E443 Owner’s Manual 35 Handy Performance Features Pitch Controls—Transpose The overall pitch of the instrument (except for the Drum Kit Voices) can be shifted up or down by a maximum of 1 octave in semitone increments. 1 Press the [TRANSPOSE] button to call up “Transpos” (Function 005). Pitch Controls—the PITCH BEND wheel The PITCH BEND wheel can be used to add smooth pitch variations to notes you play on the keyboard. Roll the wheel upward to raise the pitch, or downward to lower the pitch. Transpos 00 2 005 Use the dial to set the Transpose value between -12 and +12. You can change the amount of pitch bend produced by the wheel. Refer to “Pitch Bend Range” in the Function List (page 52). Pitch Controls—Fine Tuning The overall tuning of the instrument (except for the Drum Kit Voices) can be shifted up or down between 427.0 Hz and 453.0 Hz in approximately 0.2 Hz increments. The default value is 440.0 Hz. Reference 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up “Tuning” (Function 006). Select Voice number “000 OTS.” This lets you automatically call up the optimum Voice or Tempo for the current Song, Style or Pattern. Tuning 006 3 Use the dial to set the Tuning value. 440.0Hz 006 36 PSR-E443 Owner’s Manual Calling Up Optimum Panel Settings—One Touch Setting (OTS) Handy Performance Features Changing the Touch Response of the Keyboard Selecting an EQ Setting for the Best Sound The keyboard of this instrument is equipped with a Touch Response feature that lets you dynamically and expressively control the level of the Voices according to your playing strength. Six different master equalizer (EQ) settings give you the best possible sound when listening through different reproduction systems—the instrument’s internal speakers, headphones, or an external speaker system. 1 Press the [FUNCTION] button. 1 2 Press the CATEGORY [+] or [-] button several times until “TouchRes” (Function 009) appears. “TouchRes” is shown in the display for a few seconds, and the current Touch Response is shown. Hold down the [MELODY SUPPRESSOR] button for longer than a second to call up “Master EQ” (Function 037). “MasterEQ” is shown in the display for a few seconds, and the current Master EQ type appears. MasterEQ 037 Hold for longer than a second. Speaker TouchRes 1 009 037 Current Master EQ type 2 009 2 Rotate the dial to select the desired Master EQ type. Reference Medium Master EQ types Current Touch Response 3 Use the dial to select a Touch Response setting between 1 and 4. When “1”–“3” is selected, higher values produce greater (easier) volume variation in response to keyboard dynamics—i.e. greater sensitivity. When “4” (Fixed) is selected, all notes will be played at the same volume no matter how strongly or softly you play the keys. 1 Speaker Optimum for listening via the instrument’s built-in speakers. 2 Headphone Optimum for headphones, or for listening via external speakers. 3 Boost Features more powerful sound. 4 Piano Optimum for piano solo performance. 5 Bright Lowers the mid range for a brighter sound. 6 Mild Lowers the high range for a softer sound. NOTE • The initial default Touch Response value is “2.” PSR-E443 Owner’s Manual 37 Scale Tuning By default, this keyboard scale is set to Equal Temperament — the same tuning as with any acoustic piano. However, the setting can be changed to any other scale according to the music genre or music style you want to play. Selecting Scale You can select a desired scale among the various preset scales. 1 2 Press the [FUNCTION] button. Setting the Base Note for Each Scale Please make sure to specify the appropriate Base Note, if you select a scale other than Equal Temperament, or create an original scale via Scale Tune function. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] or [-] button to call up “BaseNote” (Function 046). Use the CATEGORY [+] or [-] button to call up “Scale” (Function 045). Scale 045 BaseNote 046 Equal 1 045 C Current Scale Reference 3 01 Rotate the dial to select a scale. The default setting is “1 Equal.” 046 Current Base Note Preset Scale types 38 1 Equal 2 Pure Major 3 Pure Minor 4 Bayat (Arabic) 5 Rast (Arabic) PSR-E443 Owner’s Manual 3 Rotate the dial to select a Base Note from C, C#, D, Eb, E, F, F#, G, Ab, A, Bb and B. The default setting is “C.” Scale Tuning Tuning Each Note to Create an Original Scale You can tune the individual notes in cents (a “cent” is one one-hundredth of a semitone.) to create your original scale. 1 Select the Base Note following the “Setting the Base Note for Each Scale” instructions (page 38). 2 Use the CATEGORY [+] or [-] button to call up the individual notes to be tuned, such as “Tune C” (Function 047) as shown. Tune C 00 047 3 Rotate the dial to tune the note selected in step 2. The tuning range is from -64 to +63. The setting can be reset to the initial default value by pressing the [+/YES] and [-/NO] buttons simultaneously. 4 Repeat steps 2–3 as desired. 5 Memorize the settings here to the Registration Memory as desired (page 33). Reference You can choose the note to be tuned from among the 12 notes below. “C ”(Function 047), “C#”(048), “D”(049), “Eb”(050), “E”(051), “F”(052), “F# ”(053), “G”(054), “Ab”(055), “A”(056), “Bb”(057), “B”(058) NOTE • When pressing the [+/YES] and [-/NO] buttons simultaneously after recalling an original scale memorized to Registration Memory, the scale will return to the original scale registered to Registration Memory, not to the default tune value. • When calling up “Scale (Function 045)” after using individual note scale tuning, “(Edited)” will be shown in the display. However, the edited scale settings will be erased by calling up another scale. For this reason, the edited settings should be memorized to the Registration Memory. PSR-E443 Owner’s Manual 39 Voice Settings Selecting a Dual Voice Voice Editing 1 For each of the Main, Dual and Split Voices, you can edit the parameters such as volume, octave and depth of the Reverb and Chorus, allowing you to create new, custom sounds that best suit your musical needs. Hold down the [DUAL] button for longer than a second to call up “D.Voice.” “D.VOICE” is shown for a few seconds, then the current Dual Voice appears. D.Voice 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up the desired item. Voice parameters are indicated as below. • Main Voice parameters: M.****** (Function 010–018) • Dual Voice parameters: D.****** (Function 019–028) • Split Voice parameters: S.****** (Function 029–034) For information about each parameter, refer to the Function List on page 53. 019 Syn.Str 077 019 Current Dual Voice 2 Rotate the dial to select the desired Dual Voice. Selecting a Split Voice 1 M.Volume Reference Hold down the [SPLIT] button for longer than a second to call up “S.Voice.” “S.VOICE” is shown for a few seconds, then the current Split Voice appears. S.Voice 064 010 3 Rotate the dial to set the value. Check the sound by playing the keyboard. 4 Repeat Steps 2–3 above to edit various parameters. 5 If necessary, memorize the settings to the Registration Memory (page 33). The Voice-related settings are reset when a different Voice is selected. If you want to store the created sound for future recall, memorize the settings to the Registration Memory. 029 FngrBass 053 029 Current Split Voice 2 40 Rotate the dial to select the desired Split Voice. PSR-E443 Owner’s Manual Parameters Assigned to the Knobs This section describes each of the parameters which can be assigned to the Knobs (page 22). c FILTER Filter effects shape the sound by allowing only a specified range of frequencies to pass and/or by producing a resonance peak at the filter’s “cutoff” frequency. Filter effects can be used to create a range of synthesizerlike sounds. NOTE EG (Envelope Generator) Envelope Generator effects determine how the level of the sound varies over time. You can make the attack faster for a more percussive sound or slower for a violin-like sound, for example. Or you can lengthen or shorten the sustain to best match the music you’re playing. • These effects are applied only to the Main/Dual Voices played on the keyboard. Level • Filter effects can sometimes cause distortion in the bass frequencies.  Knob A: CUTOFF Adjusts the filter’s cutoff frequency, and therefore the brightness of the sound. Turning the Knob to the left makes the sound more muffled or darker, while turning the Knob A to the right makes the sound brighter. Level Cutoff Frequency Frequency Frequencies in this range are passed. Frequencies in this range are cut off.  Knob B: RESONANCE Adjusts the amount of Resonance applied at the filter’s cutoff frequency. Turning the Knob to the right will increases the Resonance to emphasize the frequencies at the cutoff frequency, and thus “strengthens” the perceived effect of the filter. Level Resonance Sustain Level ATTACK Key Played x EFFECT  Knob A: REVERB Reproduces the acoustic ambience of a concert hall or club. Turning the Knob to the right will increase the Reverb depth.  Knob B: CHORUS Produces a layered “multi-instrument” effect. Turning the Knob to the right will increase the Chorus depth. NOTE • These effects are applied only to the Main/Dual Voices played on the keyboard. RELEASE Time Key Released  Knob A: ATTACK Adjusts the Attack Time (the amount of time it takes the sound to reach maximum level when a key is played). Turning the Knob to the right will increase the Attack Time, thus slowing down the attack rate.  Knob B: RELEASE Adjusts the Release Time (the amount of time it takes for the sound to decay to silence after a key is released). Turning the Knob to the right will increase the Release Time, thus make a longer sustain. NOTE • These effects are applied only to the Main/Dual Voices played on the keyboard. v STYLE FILTER Same as “ z FILTER.” These effects are applied only to Style or Pattern playback. b Frequency DECAY Reference z AUX IN These knobs can be used when playing an external audio device connected to the [AUX IN] jack of this instrument.  Knob A: SUPPRESSOR PAN Turn on the Melody Suppressor, then rotate this knob to move the pan position to be cancelled.  Knob B: BALANCE Adjusts the volume balance between the audio device and this instrument. Turning the knob left will decrease the volume of the audio device and increase the volume of this instrument, and vice versa. Even if an external audio device is not connected, rotating this PSR-E443 Owner’s Manual 41 Parameters Assigned to the Knobs knob will increase/decrease the volume of the Song/ Style/Pattern playback sound, maintaining the keyboard performance volume. n SPECIAL EFFECT  Knob B: RETRIGGER RATE While holding down the button of the currently playing Section, rotating this knob will change the Retrigger Rate (the length of the part to be repeated). Turning right will shorten the length, and vice versa.  Knob A: ULTRA WIDE STEREO Lets you play the keyboard with a spacious, dynamic sound effect that gives you the sensation of hearing the sound outside of the speakers. By changing the wide effect type in the Function settings (page 53, Function 038), you can enhance the stereo image in different ways. The chart below lists some interesting ways to use the various effects that can be assigned to the knobs. Some Ideas for Using the Knobs Number/Effect z x Reference c v FILTER EFFECT Select the Voice “008 CP80.” Turn Knobs A and B all the way down to hear the direct, unprocessed sound of the Voice. As you turn Knob B toward the right, a Chorus effect with modulation is gradually applied to the sound. Turning Knob A to the right adds a Reverb effect that makes you sound like you are playing in a concert hall. EG Select the Voice “170 RsAnPad.” Turning Knob A all the way down makes the attack faster, and lets you hear the crisp, clear sound of the original Voice. Turning Knob B all the way down shortens the amount of time for the sound to decay to silence after a key is released. These knobs let you finely adjust the Voice to create the appropriate sound for the particular song you’re playing. STYLE FILTER Select the Style, “049 EuTrance”. Turn accompaniment on and start Style playback (page 23). Set Knob B to about 3 o’clock, and Knob A to about 8 o’clock. The overall sound of the style should be a bit muffled, with the drums emphasized for solid rhythmic impact. Knob A: SUPPRESSOR PAN b AUX IN Knob B: BALANCE n 42 Try This Select “140 Gemini” (a synth-lead type Voice) or “167 Noise.” (Refer to the Voice List of the separate Data List). Turning Knobs A or B while playing gives you the dynamic filter-sweep effects of an analog synthesizer. SPECIAL EFFECT Turn these knobs when playing back an external audio device such as iPhone, iPod etc. by connecting it to the [AUX IN] jack of this instrument (page 29). Turn Melody Suppressor on, then turn Knob A to adjust the pan position of the melody sound of an external audio device to be cancelled (lowered). When you can cancel (lower) the melody part, try playing the part yourself. Turning Knob B adjusts the volume balance between an external audio device and this instrument. Knob A: ULTRAWIDE STEREO This lets you create various sounds from simulated mono to wider stereo, even when playing only a single Voice (Grand Piano, Octave Strings, etc.). Knob B: RETRIGGER RATE Select the Section C of the Pattern “001 FrenchDJ” and start Pattern playback. Turn this knob to the right while holding down the Section button C, and you can shorter the Retrigger rate like a DJ plays. PSR-E443 Owner’s Manual Arpeggio Settings Synchronizing an Arpeggio to Song/Style/Pattern Playback—Arpeggio Quantize When you play the keyboard to trigger an Arpeggio (page 21) along with Song/Style/Pattern playback, you’ll need to play the notes with correct timing to keep the Arpeggio in synchronization with the other playback tracks. However, your actual timing may be slightly ahead of or behind the beat (or both). The “Arpeggio Quantize” function of this instrument will correct any slight imperfections in the timing (according to settings below), and then play back the Arpeggio appropriately. Holding the Arpeggio Playback via the Footswitch You can set the instrument so that Arpeggio playback continues even after the note has been released, by pressing the footswitch connected to the [SUSTAIN] jack. 1 Press the [FUNCTION] button. 2 Use the CATEGORY [+] and [-] buttons to call up “Pdl Func” (Function 044). After “Pdl Func” is shown for a few seconds, the current setting is shown. • Synchronizing at the quarter notes • Synchronizing at the 8th notes • No synchronization Pdl Func Although the Arpeggio Quantize value is pre-programmed for each Arpeggio Type, you can change the value manually. Press the [FUNCTION] button. Sustain 1 2 Use the CATEGORY [+] and [-] buttons to call up “Quantize” (Function 043). After “Quantize” is shown for a few seconds, the current Arpeggio Quantize value is shown. Current setting 3 2 043 043 Current value Rotate the dial to select a value from “OFF,” “1/8” and “1/16.” • 1/8 044 If you want to restore the footswitch function to sustain, select “Sustain.” If you want to use both hold and sustain functions, select “Hold+Sus.” 1/8 3 Rotate the dial to select “Arp Hold.” Arp Hold Quantize 2 044 Reference 1 044 4 Try playing Arpeggio with the footswitch. Press the notes to trigger the Arpeggio, then press the footswitch. Even if you release the notes, Arpeggio playback will continue. To stop Arpeggio playback, release the footswitch. Synchronizing at the quarter notes • 1/16 Synchronizing at the 8th notes • OFF No synchronization PSR-E443 Owner’s Manual 43 Styles (Auto Accompaniment) and Patterns Style Variations—Sections Each Style consists of “Sections” that allow you to vary the arrangement of the accompaniment to match the song you are playing. INTRO MAIN A/B ENDING AUTO FILL INTRO This is used for the beginning of the Song. When the Intro finishes, Style playback shifts to the Main section. The length of the Intro (in measures) differs depending on the selected Style. MAIN This is used for playing the main part of the Song. Playback of the Main section repeats indefinitely until another Section’s button is pressed. There are two variations (A and B), and the Style playback sound changes harmonically in response on the chords you play with your left hand. AUTO FILL This is automatically added before changing to Main A or B. ENDING This is used for the ending of the Song. When the Ending finishes, the Style playback stops automatically. The length of the Ending (in measures) differs depending on the selected Style. Reference 1 Press the [STYLE] button, then rotate the dial to select a Style. 2 Press the [ACMP ON/OFF] button to turn ACMP on. 3 Press the [SYNC START] button to turn Synchro Start on. Beat arrows flash.  Synchro Start When the Synchro Start is on, Style playback will begin as soon as you play a chord in the accompaniment range of the keyboard. To turn off the Synchro Start, press the [SYNC START] button. Appears when ACMP is turned on. 4 Press the [MAIN/AUTO FILL] button to select Main A or Main B. MAIN A Current Section 44 PSR-E443 Owner’s Manual Styles (Auto Accompaniment) and Patterns 5 Press the [INTRO/ENDING/rit.] button. INTRO≥A Now, you’re ready to start Style playback from the Intro section. 6 Play a chord with your left hand to start playback of the Intro. For this example, play a C major chord (as shown below). For information on how to enter chords, see “Chords” on page 48. Synchro Stop When you press the [SYNC/STOP] button to turn on this function, the Style will only play while pressing chords in the Accompaniment range of the keyboard. Releasing all the notes will stop Style playback. This makes it easy to add rhythmic breaks as you perform, simply by releasing your hand from the Accompaniment range of the keyboard. Appears when the synchro-stop function is engaged. Split Point Accompaniment range After the Intro finishes, play the keyboard according to the progression of the Song you are playing. Play chords with your left hand while playing melodies with your right hand, and press the [MAIN/AUTO FILL] button as necessary. The Section will change to Fill-in then Main A or B. FILL A≥B 8 Press the [INTRO/ENDING/rit.] button. ENDING The Section switches to the Ending. When the Ending is finished, Style playback stops automatically. You can have the Ending gradually slow down (ritardando) by pressing the [INTRO/ENDING/rit.] button again while the Ending is playing back. The style will play while you are playing the keys Style playback will stop when you release the keys Turning Each Track Of Style On/Off Reference 7 As printed on the front panel, a Style consists of six tracks. Turn on/off each track via the [TRACK CONTROL] button. Each of the tracks can be muted so that you can play the muted part yourself. Pressing the desired Track button repeatedly will toggle the on/off status. On/off status is shown in the display (page 16) NOTE • Up to two Track buttons can be pressed simultaneously for turning Tracks on or off. PSR-E443 Owner’s Manual 45 Styles (Auto Accompaniment) and Patterns Pattern Variations—Sections Like the Styles, each Pattern features several Sections, allowing you to add dynamic variations to the performance. Five Sections (A–E) are provided. NOTE • When recording the Pattern playback with the Retrigger, note that the beat indicator in the display, metronome and Arpeggio playback is not synchronized with playback of the recorded Song. • When setting the tempo of the Pattern playback to more than 200, turning the Knob to the right cannot change the length from the 1st beat of 1st measure. Changing the Tempo Unlike the Styles, however, Patterns do not have the Sections dedicated to the beginning or ending of the Song, such as Intro and Ending. All Sections A–E will play back repeatedly until stopped manually. A Style or Pattern can be played at any tempo you desire—fast or slow. 1 Press the [TEMPO/TAP] button to call up the Tempo value in the display. Pattern Retrigger Function Tempo This function restarts Pattern playback from the beginning. 090 Current Tempo value Reference 1 Press the [PATTERN] button, then rotate the dial to select the desired Pattern. 2 Press the [START/STOP] button or press any key to the left of the Split Point (page 47) to start Pattern playback. 3 By pressing the button of the currently playing Section, you can restart playback from the beginning. Holding down the button lets loop-play only the top portion of the Section. The top portion length (Retrigger rate) can be changed during playback. To do this, use the [ASSIGN] button to select “6 SPECIAL EFFECT,” then rotate Knob B while holding down the button of the currently playing Section. 2 Rotate the dial to set a tempo from 011 to 280. Press the [+/YES] and [-/NO] buttons simultaneously to instantly reset the value to the default tempo of the current Style or Pattern. You can change the tempo during playback by pressing the [TEMPO/TAP] button just twice at the required tempo. NOTE • The above operation applies also to Song or Arpeggio playback tempo. Tap Start You can start play back of the Style, Pattern or Song by simply tapping the [TEMPO/TAP] button at the required tempo—four times for time signatures in 4 (4/4, etc.), and three times for time signatures in 3 (3/ 4, etc.). NOTE • Tap tempo setting range: 32–280 46 PSR-E443 Owner’s Manual Styles (Auto Accompaniment) and Patterns Adjusting the Volume of the Style or Pattern 3 Rotate the dial to set the Split Point between 036 (C1) and 096 (C6). Split Point ... default value: 054 (F#2) You can adjust the volume balance between Style or Pattern playback and keyboard performance. Press the [FUNCTION] button. 036 (C1) 048 (C2) Split voice 2 3 Use the CATEGORY [+] and [-] buttons to call up “StyleVol” (Function 001) or “PatrnVol” (Function 003). 072 (C4) 084 (C5) 096 (C6) Main voice and dual voice NOTE • When a Style is selected and ACMP is on, the notes played to the left of the Split Point are used to specify the chord for Style playback. When a Pattern is selected, the note played to the left of the Split Point is used to specify the key for Pattern playback. StyleVol • The Split Point set here is applied common to the Style, Pattern and Voice. 100 • During the Lesson playback, the Split Point cannot be changed. 001 Rotate the dial to set the volume between 000 and 127. Playing Chords Without Style Playback Setting the Split Point The point on the keyboard that separates the left-hand range and the right-hand range of the keyboard is called the “Split Point.” The initial default Split Point is key number 054 (the F#2 key), but you can change it to another key. 1 060 (C3) Press the [FUNCTION] button. If you press the [STYLE] button, press the [ACMP ON/OFF] button to turn ACMP on (the ACMP ON icon appears), and play the chord in the Left hand range of the keyboard (with SYNC START off), the chord sound will be heard without Style playback. This is referred to as “Stop Accompaniment.” The specified chord will be shown in the display, and affects the Harmony function (page 20). Reference 1 PopBossa 114 2 Use the CATEGORY [+] and [-] buttons to call up “SplitPnt” (Function 008). You can call up this display also by pressing the [STYLE] then holding the [ACMP] button for longer than a second. Appears when auto accompaniment is on Accompaniment range SplitPnt 054 008 Split Point PSR-E443 Owner’s Manual 47 Styles (Auto Accompaniment) and Patterns Chord Types for Style Playback For users who are new to chords, this chart features common chords. Since there are many useful chords and many different ways to use them musically, refer to commercially available chord books for further details.  indicates the root note. Major Minor Seventh Minor Seventh Major Seventh Reference C Cm C7 Cm7 CM 7 D Dm D7 Dm7 DM 7 E Em E7 Em7 EM7 C F Fm F7 Fm7 FM7 G Gm G7 Gm7 GM7 A Am A7 Am7 AM 7 B Bm B7 Bm 7 BM 7 • Inversions can be used as well as in “root” position—with the following exceptions: m7, m7b5, 6, m6, sus4, aug, dim7, 7b5, 6(9), sus2 • Inversion of the 7sus4 and m7(11) chords are not recognized if the notes are omitted. • When playing a chord which cannot be recognized by this instrument, nothing is shown on the display. In such a case, only the rhythm and bass parts will be played. Easy Chords This method lets you easily play chords in the accompaniment range of the keyboard using only one, two, or three fingers. For root “C” C To play a major chord Press the root note () of the chord. 48 PSR-E443 Owner’s Manual Cm To play a minor chord Press the root note together with the nearest black key to the left of it. C7 To play a seventh chord Press the root note together with the nearest white key to the left of it. Cm 7 To play a minor seventh chord Press the root note together with the nearest white and black keys to the left of it (three keys altogether). Styles (Auto Accompaniment) and Patterns 2-2. Looking Up Chords Using the Chord Dictionary The Dictionary function is useful when you know the name of a certain chord and want to quickly learn how to play it. 1 Press the key labeled “M7” in the section between “CHORD TYPE ” and “ROOT.” The notes you should play for the specified chord (root note and chord type) are conveniently shown in the display, both as notation and in the keyboard diagram. Press and hold the [CHORD DICT] button for longer than a second to call up “Dict.” Dict. Hold for longer than a second. Notation of chord This operation will divide the entire keyboard into the three ranges as illustrated below. Dict. • The range to the right of “ROOT ”: Lets you specify the Chord Root, but produces no sound. • The range between “CHORD TYPE ” and “ROOT ”: Lets you specify the Chord Type, but produces no sound. • The range to the left of “CHORD TYPE ”: Lets you play and confirm the Chord specified in the above two ranges. Chord Type range 001 Individual notes of chord (keyboard) To call up possible inversions of the chord, press the [+/YES]/[-/NO] buttons. NOTE Root range • About major chords: Simple major chords are usually indicated only by the root note. For example, “C” refers to C major. However, when specifying major chords here, make sure to select “M” (major) after pressing the root note. The highest key 2 As an example, learn how to play a GM7 (G major seventh) chord. 2-1. Press the “G” key in the section to the right of “ROOT ” so that the “G” is shown as the root note. 3 Reference Keyboard playing range Chord name (root and type) Following the notation and keyboard diagram in the display, try playing a chord in the range to the left of “CHORD TYPE .” When you’ve played the chord properly, a bell sound signals your success and the chord name in the display flashes. Specifying only the key for Pattern playback Note that you need to specify only the root note for Pattern playback, unlike Style playback for which you also need to specify the Chord Type. Dict. 001 PSR-E443 Owner’s Manual 49 Song Settings BGM (Background Music) Playback With the default setting, pressing the [DEMO/BGM] button will play back only a few of the internal Songs repeatedly. This setting can be changed so that, for example, all internal Songs are played, or all Songs transferred to the instrument from a computer are played back, letting you use the instrument as a background music source. Five playback group settings are provided. Simply select the one that suits your needs. 1 Hold down the [DEMO/BGM] button for longer than a second. “DemoGrp” is shown in the display for a few seconds, followed by the current repeat playback target. Random Song Playback The order of Song repeat playback via the [DEMO/ BGM] button can be changed between the numerical order and random order. 1 Press the [FUNCTION] button. 2 Press the CATEGORY [+] and [-] buttons several times to call up “PlayMode” (Function 074). “PlayMode” is shown for a few seconds, followed by the current playback mode, “Normal” or “Random.” PlayMode 074 Hold for longer than a second. 2 Demo Preset Songs 001–003 Preset All preset Songs Reference User All User Songs Download All Songs transferred from a computer USB All Songs (MIDI files) in the connected USB flash memory NOTE • When User Songs, Download Songs and USB Songs data do not exist, Demo songs are played back. 3 50 When the DemoGrp is set to “Demo,” this parameter cannot be set. Rotate the dial to select a repeat playback group from the table below. Press the [DEMO] button to start playback. To stop playback, press the [DEMO] button again. PSR-E443 Owner’s Manual 3 Rotate the dial to select “Random.” To return to the numerical order, select “Normal.” 4 Press the [DEMO] button to start playback. To stop playback, press the [DEMO] button again. Song Settings Tempo Setting of the Song This operation is same as that of the Style and Pattern. Refer to page 46. Tap Start Melody Voice Setting of the Preset Song You can change the Melody Voice of the current Preset Song temporarily to any other desired Voice. 1 Press the [SONG] button, select the desired Preset Song, then start playback. 2 Press the [VOICE] button, then rotate the dial to select the desired Voice. This operation is same as that of the Style and Pattern. Refer to page 46. Song Volume 1 Press the [FUNCTION] button. Strings 069 Press the CATEGORY [+] and [-] buttons several times to call up “SongVol” (Function 002). SongVol 100 3 Hold down the [VOICE] button for longer than a second. After “SONG MELODY VOICE” is shown for a few seconds, the Melody Voice of the Song will be changed to that selected in Step 2. 002 SONG MEL Reference 2 Song volume 3 Rotate the dial to set the Song volume between 000 and 127. NOTE • Song volume can be adjusted while a Song is selected. Hold for longer than a second. NOTE • Selecting another Song will cancel the changed Melody Voice. • You cannot change the Melody Voice of a User Song. PSR-E443 Owner’s Manual 51 The Functions The “Functions” provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and Effects. Take a look at the Function List (pages 52–55). When you find the desired Function you want to change, follow the instructions below. Basic Procedure in the Function Display 1 Find the desired item in the Function List on pages 52–55. 2 Press the [FUNCTION] button. 4 Use the dial, the [+/YES] and [-/NO] buttons, or the [0]–[9] number buttons to set the value of the selected function. To restore the default value, press the [+/YES] and [-/NO] buttons simultaneously. In the sole case of the MIDI Initial Send function (page 54), pressing the [+/YES] button executes the function while pressing [-/NO] cancels it. StyleVol 100 3 001 Press the CATEGORY [+] and [-] buttons several times until the desired item appears. Direct numeric entry. Current item SplitPnt 054 008 Current Function number Reference • Decrement value by 1. • Cancel Press simultane- • Increment ously to recall the value by 1. default setting. • Execute Some Function settings are maintained even if you turn off the power, and can be transferred to the computer as Backup Data (page 34). Function List Function Number Function Display Range/Settings Default Value Description Volume 001 Style Volume StyleVol 000–127 100 Refer to page 47. 002 Song Volume SongVol 000–127 100 Refer to page 51. 003 Pattern Volume PatrnVol 000–127 100 Refer to page 47. 004 Aux In Volume AuxInVol 000–127 100 Refer to page 29. Transpose Transpos -12–12 00 Refer to page 36. 440.0Hz Refer to page 36. Overall 005 006 Tuning Tuning 427.0Hz–453.0Hz (in approximately 0.2Hz increments) 007 Pitch Bend Range PBRange 01–12 008 Split Point SplitPnt 036–096 (C1–C6) TouchRes 1 (Soft), 2 (Medium), 3 (Hard), 4 (Fixed) 009 52 Touch Response PSR-E443 Owner’s Manual 02 Sets the range over which you can control pitch by using the PITCH BEND wheel (page 36), in semitone increments. 054 (F#2) Refer to page 47. 2 (Medium) Refer to page 37. The Functions Function Number Function Display Range/Settings Default Value Description Main Voice (page 17) 010 Volume M.Volume 000–127 * Determines the volume of the Main Voice. 011 Octave M.Octave -2 – +2 * Determines the octave range for the Main Voice. 012 Pan M.Pan 000 (left)– 064 (center)– 127 (right) * Determines the stereo pan position of the Main Voice. The value “0” results in the sound being panned full left; the value “127” results in the sound being panned full right. 013 Reverb Depth M.Reverb 000–127 * Determines how much of the Main Voice's signal is sent to the Reverb effect. 014 Chorus Depth M.Chorus 000–127 * Determines how much of the Main Voice’s signal is sent to the Chorus effect. 015 Attack Time M.Attack 000–127 064 Determines how fast the volume of the Main Voice reaches the Attack level when the note is pressed. The larger the value, the slower the attack rate. The smaller the value, the faster the attack rate. 016 Release Time M.Releas 000–127 064 Determines how fast the volume of the Main Voice falls to 0 when the note is released. The larger the value, the longer the sustain. The smaller the value, the shorter the sustain. 017 Filter Cutoff M.Cutoff 000–127 064 Determines the Filter Cutoff Frequency (page 41) of the Main Voice. 018 Filter Resonance M.Reso. 000–127 064 Determines the Filter Resonance (page 41) of the Main Voice. Dual Voice (page 18) 019 Dual Voice D.Voice 001–755 * 020 Volume D.Volume 000–127 * Determines the volume of the Dual Voice. 021 Octave D.Octave -2 – +2 * Determines the octave range for the Dual Voice. 022 Pan D.Pan 000 (left)– 064 (center)– 127 (right) * Determines the stereo pan position of the Dual Voice. A value of “0” results in the sound being panned full left; a value of “127” results in the sound being panned full right. 023 Reverb Depth D.Reverb 000–127 * Determines how much of the Dual Voice’s signal is sent to the Reverb effect. 024 Chorus Depth D.Chorus 000–127 * Determines how much of the Dual Voice’s signal is sent to the Chorus effect. 025 Attack Time D.Attack 000–127 064 Determines how fast the volume of the Dual Voice reaches the Attack level when the note is pressed. The larger the value, the slower the attack rate. The smaller the value, the faster the attack rate. 026 Release Time D.Releas 000–127 064 Determines how fast the volume of the Dual Voice falls to 0 when the note is released. The larger the value, the longer the sustain. The smaller the value, the shorter the sustain. 027 Filter Cutoff D.Cutoff 000–127 064 Determines the Filter Cutoff Frequency (page 41) of the Dual Voice. 028 Filter Resonance D.Reso. 000–127 064 Determines the Filter Resonance (page 41) of the Dual Voice. Reference Selects a Dual Voice. Split Voice (page 18) 029 Split Voice S.Voice 001–755 053 (FngrBass) 030 Volume S.Volume 000–127 080 031 Octave S.Octave -2 – +2 032 Pan S.Pan 000 (left)– 064 (center)– 127 (right) 064 Determines the stereo pan position of the Split Voice. A value of “0” results in the sound being panned full left; a value of “127” results in the sound being panned full right. 033 Reverb Depth S.Reverb 000–127 008 Determines how much of the Split Voice’s signal is sent to the Reverb effect. 034 Chorus Depth S.Chorus 000–127 000 Determines how much of the Split Voice’s signal is sent to the Chorus effect. -1 Selects a Split Voice. Determines the volume of the Split Voice. Determines the octave range for the Split Voice. Effects 035 Reverb Type Reverb 01–10 ** Refer to page 35. 036 Chorus Type Chorus 1–6 ** Refer to page 35. 1 (Speaker) Refer to page 37. 037 Master EQ Type MasterEQ 1 (Speaker), 2 (Headphone), 3 (Boost), 4 (Piano), 5 (Bright), 6 (Mild) 038 Wide Type Wide 1–3 2 (Wide2) Determines the Ultra-Wide Stereo type. Higher values produce a greater Wide effect. Harmony (page 20) 039 Harmony Type HarmType 01–26 * Determines the Harmony type. 040 Harmony Volume HarmVol 000–127 * Determines the volume of the Harmony effect. PSR-E443 Owner’s Manual 53 The Functions Function Number Function Display Range/Settings Default Value Description Arpeggio (page 21) 041 Arpeggio Type ARP Type 001–150 * Determines the Arpeggio type. 042 Arpeggio Velocity ARP Velo 1(Original), 2(Thru) Depending on the Arpeggio type When “Thru” is selected, the velocities of Arpeggio playback are determined by your playing strength. When “Original” is selected, the velocities of Arpeggio playback are determined by the original setting regardless of your playing strength. 043 Arpeggio Quantize Quantize 1(OFF), 2(1/8), 3(1/16) Depending on the Arpeggio type Refer to page 43. 044 Pedal Function Pdl Func 1 (Sustain) / 2 (Arp Hold) / 3 (Hold+Sus) * Refer to page 43. 1 (Equal) Refer to page 38. 01 (C) Refer to page 38. 00 Refer to page 39. Scale Tuning (page 38) 045 Scale Scale 1 (Equal), 2 (Pure Maj), 3 (Pure min), 4 (Bayat), 5 (Rast) 046 Base Note BaseNote 01 (C), 02 (C#), 03 (D), 04 (Eb), 05 (E), 06 (F), 07 (F#), 08 (G), 09 (Ab), 10 (A), 11 (Bb), 12(B) Individual Note Tuning Tune C, C#, D, Eb, E, F, F#, -64–63 G, Ab, A, Bb, B 047–058 Computer (USB [TO HOST] terminal)*** PC mode PC mode OFF/PC1/PC2 OFF Optimizes the MIDI settings when you connect to a computer 060 Local Control Local ON/OFF ON Determines whether the instrument’s keyboard controls the internal tone generator (ON) or not (OFF). When you record your keyboard performance to the application software on the computer via MIDI, set this parameter to OFF. 061 External Clock ExtClock ON/OFF OFF Determines whether the instrument synchronizes to the internal clock (OFF) or an external clock (ON). When you record your keyboard performance to the application software on the computer via MIDI, set this parameter to ON. 062 Keyboard Out KbdOut ON/OFF ON Determines whether MIDI messages generated via keyboard performance are transmitted (ON) or not (OFF) from the USB [TO HOST] terminal. 063 Style Out StyleOut ON/OFF OFF Determines whether MIDI messages generated via Style playback are transmitted (ON) or not (OFF) from the USB [TO HOST] terminal. 064 Song Out SongOut ON/OFF OFF Determines whether MIDI messages generated via Song playback are transmitted (ON) or not (OFF) from the USB [TO HOST] terminal. 065 Initial Send InitSend YES/NO - Lets you send the data of the panel settings to a computer. Press [+/YES] to send, or press [-/NO] to cancel. This operation should be done immediately after starting the Recording operation on the computer. TimesigN 00–60 ** Determines the time signature of the Metronome. ** Determines the length of each metronome beat. 059 MIDI*** Reference Metronome (page 19) 066 Time Signature Numerator 067 Time Signature Denominator TimesigD Half note, Quarter note, Eighth note, Sixteenth note 068 Metronome Volume MtrVol 000–127 100 Determines the volume of the Metronome. Lesson (page 27) 069 Lesson Track (R) R-Part GuideTrack01–16, OFF 01 Determines the guide track number for your right hand lesson. The setting is only effective for Songs in SMF format 0, in USB flash memory or transferred from a computer. 070 Lesson Track (L) L-Part GuideTrack01–16, OFF 02 Determines the guide track number for your left hand lesson. The setting is only effective for Songs in SMF format 0, in USB flash memory or transferred from a computer. 071 Grade Grade ON/OFF ON Determines whether the Grade function is on or off. ON This parameter is for Lesson 3 “Waiting.” When set to ON, playback tempo will change to match the speed at which you are playing. When set to OFF, playback tempo will be maintained regardless of the speed at which you are playing. 072 54 Your Tempo YourTemp PSR-E443 Owner’s Manual ON/OFF The Functions Function Number Function Display Range/Settings Default Value Description Demo (page 25) 073 Demo Group DemoGrp 1 (Demo) / 2 (Preset) / 3 (User) / 4 (Download) / 5 (USB) 1 (Demo) Refer to page 50. 074 Demo Play Mode PlayMode 1 (Normal) 2 (Random) 1 (Normal) Refer to page 50. 075 Demo Cancel D-Cancel ON/OFF OFF Determines whether Demo cancel is enabled or not. When this is set to ON, the Demo Song will not play, even if the [DEMO/BGM] button is pressed. OFF, 5/10/15/30/60/ 120 (min.) 30 minutes Specifies the time that will elapse before the instrument’s power is automatically turned off. Battery Type 1 (Alkaline) / 2 (Ni-MH) 1 (Alkaline) Selects the type of batteries you have installed to this instrument. Language English/Japanese Auto Power Off (page 15) 076 Auto Power Off Time AutoOff Battery (page 13) 077 Battery Type Language (page 58) 078 Language English Determines the language for the Song file names. Reference * The appropriate value is automatically set for each Voice. ** The appropriate value is automatically set for each Song, Style or Pattern. *** For details, refer to “Computer-related Operations” (page 9). PSR-E443 Owner’s Manual 55 USB Flash Memory Operations By connecting the USB flash memory device to the USB [TO DEVICE] terminal, you can save the data created on this instrument, such as User Song and parameter settings. The saved data can be recalled to this instrument again for the future use. IMPORTANT • It is recommended to use the Power Adaptor when executing USB flash memory operations, since battery power may not be reliable enough to last through these crucial operations. When you try executing certain functions, the “Use Adaptor” indication may appear and the selected function cannot be executed. Precautions when using the USB [TO DEVICE] terminal This instrument features a built-in USB [TO DEVICE] terminal. When connecting a USB device to the terminal, be sure to handle the USB device with care. Follow the important precautions below. NOTE • For more information about the handling of USB devices, refer to the owner’s manual of the USB device.  Compatible USB devices Reference • USB flash memory Other USB devices such as a computer keyboard or mouse cannot be used. Although USB devices 1.1 to 3.0 can be used on this instrument, the amount of time for saving to or loading from the USB device may differ depending on the type of data or the status of the instrument. The instrument does not necessarily support all commercially available USB devices. Yamaha cannot guarantee operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please visit the following web page: http://download.yamaha.com/ NOTE • The rating of the USB [TO DEVICE] terminal is a maximum of 5V/500mA. Do not connect USB devices having a rating above this, since this can cause damage to the instrument itself.  Connecting USB device • When connecting a USB device to the USB [TO DEVICE] terminal, make sure that the connector on the device is appropriate and that it is connected in the proper direction. NOTICE • Avoid connecting or disconnecting the USB device while executing playback/recording and file management operations (such as Save, Copy, Delete and Format), or when accessing the USB device. Failure to observe this may result in “freezing” of the operation of the instrument or corruption of the USB device and the data. • When connecting then disconnecting the USB device (and vice versa), make sure to wait a few seconds between the two operations. NOTE • When connecting a USB cable, make sure that the length is less than 3 meters. 56 PSR-E443 Owner’s Manual Using USB Flash Memory By connecting the instrument to a USB flash memory, you can save data you’ve created to the connected device, as well as read data from the connected device. NOTE • Although CD-R/RW drives can be used to read data to the instrument, they cannot be used for saving data.  The number of USB flash memory to be used Only one USB flash memory device can be connected to the USB [TO DEVICE] terminal.  Formatting USB flash memory You should format the USB storage device only with this instrument (page 58). A USB flash memory formatted on another device may not operate properly. NOTICE • The format operation overwrites any previously existing data. Make sure that the USB flash memory you are formatting does not contain important data.  To protect your data (write-protect) To prevent important data from being inadvertently erased, apply the write-protect provided with each USB flash memory. If you are saving data to the USB flash memory, make sure to disable write-protect.  Turning off the instrument When turning off the instrument, make sure that the instrument is NOT accessing the USB flash memory by playback/recording or file management (such as during Save, Copy, Delete and Format operations). Failure to do so may corrupt the USB flash memory and the data. USB Flash Memory Operations Connecting a USB Flash Memory 1 2 Connect a USB flash memory to the USB [TO DEVICE] terminal, being careful to insert it with the proper orientation. Wait until “USB” appears on the left corner of the display. The “USB” indication confirms that the connected USB flash memory has been mounted or recognized. 4 Use the CATEGORY [+] and [-] buttons to call up the desired File Control function, then execute it. For details, refer to the table below. File Control Display List Display File Control function Page Format? Formatting a USB Flash Memory 58 Save USR Saving User Data to a USB Flash Memory 59 Save SMF Saving a User Song as SMF to a USB Flash Memory 60 Load USR Loading User Data from a USB Flash Memory 60 Load STY Loading a Style File 61 Del USR Deleting a User File in a USB Flash Memory 62 Del SMF Deleting a SMF File in a USB Flash Memory 62 Exit? Exiting from a File Control display 63 Messages may appear on the display during File Control procedures to aid in smooth operation. Refer to the Message List on page 63 for details. GrandPno NOTE 3 Hold down the [FUNCTION] button for longer than a second to call up the File Control display. Load STY Reference • No sound will be produced if the keyboard is played while the file control display is showing, and only buttons related to File Control operations will be active. NOTE The File Control display cannot be called up in the following situations. • During playback of Style, Pattern, or Song • When “USB” does not appear even if you have connected a USB flash memory to the USB [TO DEVICE] terminal. Hold for longer than a second.  If “UnFormat” followed by “Format?” appears: This indicates that the connected USB flash memory has not been formatted, and cannot be mounted or recognized. Execute the Format operation by following the instructions starting with Step 2 on page 58. PSR-E443 Owner’s Manual 57 USB Flash Memory Operations Formatting a USB Flash Memory The Format operation lets you prepare commercially available USB flash memory for use with this instrument is called “Format.” 1 2 Recognizable file location in the USB flash memory for Song playback (page 25) USB flash memory (Root) Song File Hold the [FUNCTION] button for longer than a second to call up the File Control display. Song File Use the CATEGORY [+] and [-] buttons to call up “Format?.” Can be selected/ played. Song File Format? Song File 3 4 Press the [0/EXECUTE] button. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Reference Press the [0/EXECUTE] button again or the [+/YES] button to execute the Format operation. After a while, a message indicating completion of the operation appears, and the “USER FILES” folder will be created on the root directory in the USB flash memory. NOTICE • The Format operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. 5 58 Press the [FUNCTION] button to exit from the File Control display. PSR-E443 Owner’s Manual Cannot be selected/played. IMPORTANT • In order to play data copied to a USB flash memory from a computer or other device, the data must be stored either in the USB flash memory’s root directory or a first-level/second-level folder in the root directory. Data stored in third-level-folders created inside a second-level folder cannot be selected and played by this instrument. NOTE • If playback of an external Song (created via a different instrument or computer) produces the distorted sound, decrease the Song Volume (page 51) to reduce the distortion then adjust the Master Volume (page 15). Song title display language File names containing Japanese katakana characters will be properly displayed if the instrument’s display language is set to “Japanese.” All display information other than file names will be displayed in English even if “Japanese” is selected. The display language can be set via the Language function (page 55). USB Flash Memory Operations Saving User Data to a USB Flash Memory 5 The following data created on this instrument comprise the “User Data.” • All 10 User Songs • Styles which have been transferred from a computer then loaded to Style numbers 201–205. NOTICE • The Save operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. • All the Registration Memory settings The User Data can be saved as a single “User File” (.usr) to a USB flash memory. NOTE • The amount of time required for this operation may vary depending on the condition of the USB flash memory. NOTE • The extension (.usr) of the User File will not be shown on the display of this instrument. Confirm the extension on the computer display when connecting the USB flash memory to a computer. 1 Hold the [FUNCTION] button for longer than a second to call up the File Control display. 2 Use the CATEGORY [+] and [-] buttons to call up “Save USR.” Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Save operation. After a while, a message indicating completion of the operation appears, and a User file (.usr) will be saved in a “USER FILES” folder which will automatically be created on the USB flash memory. 6 Press the [FUNCTION] button to exit from the File Control display. NOTE • If you want to recall the User file (.usr) to this instrument again, execute the Load operation (page 60). 3 Reference Save USR Press the [0/EXECUTE] button. As the target file name, “USER***” (***: number) appears on the display. If desired, rotate the dial to select a different file name from “USER001”–“USER100.” USER001 4 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Overwriting existing files If a file that already contains data is selected as the target user file, an overwrite confirmation message will appear. PSR-E443 Owner’s Manual 59 USB Flash Memory Operations Saving a User Song as SMF to a USB Flash Memory 5 A User Song can be converted to SMF (Standard MIDI File) format 0 and saved to a USB flash memory. SMF (Standard MIDI File) format With this format, various events via the keyboard performance such as note on/off and Voice selection will be recorded as MIDI data. The SMF Format 0 and Format 1 are available. A large number of MIDI devices are compatible with SMF Format 0, and most commercially available Song file (MIDI file) is provided in SMF Format 0. Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Overwriting existing files If a file that already contains data is selected, an overwrite confirmation message will appear. 6 NOTE • The User Song recorded Pattern cannot be converted to SMF. Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Save operation. After a while, a message indicating completion of the operation appears, and a User Song will be saved as the SMF format 0 in a “USER FILES” folder which will automatically be created on the USB flash memory. NOTICE 1 • The Save operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. Hold the [FUNCTION] button for longer than a second to call up the File Control display. NOTE 2 • The amount of time required for this operation may vary depending on the condition of the USB flash memory. Use the CATEGORY [+] and [-] buttons to call up “Save SMF.” • In case a Pattern is recorded to the User Song, the Save operation cannot be executed by pressing the [0/EXECUTE] button or the [+/YES] button, and “Can’tUse” appears on the display. Save SMF Reference 7 3 Press the [0/EXECUTE] button. As the target User Song, “USER**” (**: number 1–10) appears on the display. If desired, rotate the dial to select a different User Song from “USER01”–“USER10” then press the [0/EXECUTE] button. User 1 4 Press the [0/EXECUTE] button again. As the target file name on the USB flash memory, “SONG***” (***: number 1–100) appears on the display. If desired, rotate the dial to select the different file. SONG001 60 Press the [FUNCTION] button to exit from the File Control display. PSR-E443 Owner’s Manual Loading User Data from a USB Flash Memory A User data (page 59) saved as a User file (.usr) to the USB flash memory can be loaded to this instrument. NOTICE • Loading a User file will overwrite and erase the existing data, including all 10 User Songs, Style data loaded to the Style numbers 201–205, and all the Registration Memory settings. Save important data you want to keep to a separate USB flash memory before loading a User file. USB Flash Memory Operations 2 Hold the [FUNCTION] button for longer than a second to call up the File Control display. Use the CATEGORY [+] and [-] buttons to call up “Load USR.” Load USR 3 Press the [0/EXECUTE] button. “USER***” (***: number) appears on the display as the User file name in the USB flash memory. As desired, rotate the dial to select a different User file. USER001 4 5 Loading a Style File Style data created on another instrument or a computer can be loaded to the Style numbers 201–205, and you can play them like the internal preset Styles. The following two Load operations are available.  Loading of a Style file (.sty) saved on the root directory on the USB flash memory  Loading of a Style file (.sty) transferred from a computer via the Musicsoft Downloader and stored in the internal memory of this instrument NOTE • For instructions on transferring a Style file from a computer via the Musicsoft Downloader, refer to “Computer-related Operations” (page 9). After data transfer, load the Style data to one of the Style numbers 201–205 to enable playback. NOTICE • Loading a Style file will overwrite and erase the existing data of the destination number. Save important data you want to keep to a separate USB flash memory before loading. Note that the User file should be saved in the USERFILES folder on the USB flash memory. Files saved outside this folder cannot be recognized. 1 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Hold the [FUNCTION] button for longer than a second to call up the File Control display. 2 Use the CATEGORY [+] and [-] buttons to call up “Load STY.” Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Load operation. After a while, a message indicating completion of the operation appears. NOTICE Load STY 3 • The Load operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. 6 Press the [FUNCTION] button to exit from the File Control display. 7 Check the loaded data by calling up the User Song, one of the Styles 201–205, and Registration Memory settings. Reference 1 Press the [0/EXECUTE] button. A name of a Style file in the USB flash memory or internal memory of this instrument will appear on the display. As desired, rotate the dial to select a different Style file. DiscoFox FLA 4 Press the [0/EXECUTE] button again. As the Load destination, “Load To? ***” (***: 201–205) appears on the display. If desired, rotate the dial to select a different number. Load To? 201 PSR-E443 Owner’s Manual 61 USB Flash Memory Operations 5 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. 4 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. 6 Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Load operation. After a while, a message indicating completion of the operation appears. 5 Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Delete operation. After a while, a message indicating completion of the operation appears. NOTICE NOTICE • The Load operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. 7 Press the [STYLE] button, rotate the dial to select a Style from 201–205, then try playing it back. Deleting a User File in the USB Flash Memory User Files (.usr) in the root directory of the USB flash memory can be deleted. • The User file (.usr) to be deleted should have been saved in the root directory of the USB flash memory. Files outside this folder cannot be recognized. Reference 2 6 Press the [FUNCTION] button to exit from the File Control display. Deleting a SMF File in the USB Flash Memory You can delete a SMF file that has been saved in the USB flash memory via the Save SMF operation (page 60). IMPORTANT IMPORTANT 1 • The Delete operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. Hold the [FUNCTION] button for longer than a second to call up the File Control display. Use the CATEGORY [+] and [-] buttons to call up “Del USR.” • The SMF file (.usr) to be deleted should have been saved in the root directory of the USB flash memory. Files outside this folder cannot be recognized. This operation can be applied only to file names with the “SONG***” (***: 001– 100) format. 1 Hold the [FUNCTION] button for longer than a second to call up the File Control display. 2 Use the CATEGORY [+] and [-] buttons to call up “Del SMF.” Del USR Del SMF 3 Press the [0/EXECUTE] button. As a User file name in the USB flash memory, “USER****” (****: number) appears on the display. As desired, rotate the dial to select a different User file. USER001 3 Press the [0/EXECUTE] button. As a SMF file name in the USB flash memory, “SONG***” (***: number) appears on the display. As desired, rotate the dial to select a different SMF file. SONG001 62 PSR-E443 Owner’s Manual USB Flash Memory Operations 5 Press the [0/EXECUTE] button again. A confirmation message will appear. To cancel the operation, press the [-/NO] button. Press the [0/EXECUTE] button again, or the [+/YES] button to execute the Delete operation. After a while, a message indicating completion of the operation appears. Message List Message Can’tUse • Indicates that the file control function is currently unavailable since the media is being accessed. • Displayed when attempting to save a User Song recorded Pattern as SMF format 0. Complet. Indicates the specified job completion such as data saving and transmission. Data Err Displayed when the user song contains illegal data. Disk Ful Displayed when saving data cannot be executed since the media memory becomes full. Error Displayed when a file error or operational error occurs. File Ful Indicates that SMF songs cannot be displayed since the total number of files exceeds the capacity. no data There is no data to save in the flash memory. no file There is no file to load or delete from the media. NOTICE • The Delete operation cannot be cancelled during execution. Never turn off the power or disconnect the USB flash memory during the operation. Doing so may result in data loss. 6 Press the [FUNCTION] button to exit from the File Control display. Exiting from a File Control display To exit from the File Control display, press the [VOICE], [STYLE], [PATTERN], [SONG], [FUNCTION], or [PORTABLE GRAND] button. You can also exit from the File Control function mode as follows: 1 Use the CATEGORY [+] and [-] buttons to call up “Exit?.” Comment 0ur Communication with the USB device has been shut down because of the overcurrent to the USB device. Disconnect the device from the USB [TO DEVICE] terminal, then turn on the power of the instrument. Protect Displayed when trying to save or delete data on a protected media, or format a protected media. Set protect to off and try again. UnFormat Displayed when connecting an unformatted media. UseAdpt USB flash memory save, delete, and format operations cannot be performed when the instrument is being powered from battery. Use an AC adaptor. Reference 4 Exit? 2 Press the [0/EXECUTE] button to exit from the File Control display. PSR-E443 Owner’s Manual 63 Troubleshooting Appendix Problem Possible Cause and Solution When the instrument is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the instrument is receiving electrical power. When using a mobile phone, noise is produced Using a mobile phone in close proximity to the instrument may produce interference. To prevent this, turn off the mobile phone or use it further away from the instrument The instrument is automatically turned off even if no operation is done. This is normal. This occurs due to the Auto Power Off function (page 15). The volume is too soft. The sound quality is poor. The Style/Pattern/Song/Arpeggio stops unexpectedly or will not play. The recorded data of the song, etc. does not play correctly. The LCD display suddenly goes dark, and all panel settings are reset. The batteries are low or dead. Replace all six batteries with completely new ones or completely recharged ones, or use the AC power adaptor. No sound is produced even when the keyboard is played, or a Song, Style, or Pattern is being played back. Check whether a set of headphones or an audio cable is connected to the [PHONES/OUTPUT], or not. When such a connection is made, no sound is output from the speaker of this instrument. Check the on/off status of the Local Control (page 54). Normally, set this parameter to ON. Appendix 64 The footswitch (for sustain) seems to produce the opposite effect. For example, pressing the footswitch cuts off the sound and releasing it sustains the sounds. The polarity of the footswitch is reversed. Make sure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power. No sound is produced even when playing keys in the right hand area of the keyboard, although chords played in the left hand area are recognized. Check whether or not the Dictionary function (page 49) is used. When used, this is normal. Not all of the Voices seem to sound, or the sound seems to be cut off, when playing the keyboard, Arpeggio, Style or Pattern or Song. You have exceeded 32 simultaneous notes, which is the maximum polyphony (the maximum amount of notes that can be played simultaneously) of this instrument. If the Main, Dual, and Split Voices are being used along with playback of Arpeggio, Style, Pattern or Song, some notes/sounds may be omitted (or “stolen”). The sound of the Voice changes from note to note. This is normal. The tone generation method uses multiple recordings (samples) of an instrument across the range of the keyboard; thus, the actual sound of the Voice may be slightly different from note to note. The keyboard performance and playback of Style/Pattern/Song produces an unexpected or inappropriate sound, and cannot be restored to the normal status. Using the Knobs can produce dramatic changes in the sound, but may also produce unexpected or undesired sounds. If you want to restore the original, normal sound before being changed by the Knobs, change the Voice, Style, Pattern or Song, or press the [PORTABLE GRAND] button to reset the panel settings. The Style, Pattern or Song does not start even when the [START/STOP] button is pressed. The Arpeggio does not start even when the note is pressed with the Arpeggio turned on. Check the on/off status of the External Clock (page 54). Normally, set this parameter to OFF. The volume of the Style, Pattern or Song is too low. Check the volume setting in the Functions (pages 47 and 51). The chords played in the left hand area cannot be recognized even when the ACMP is turned on. Check the Split Point setting (page 47). Set this to the appropriate value. Style parts other than the Rhythm part produce no sound. Check the on/off status of the ACMP (page 23). Make sure to turn ACMP on. The Styles numbered 176 or 188–200 produce no rhythm drum sound even when the [START/STOP] button is pressed. This is normal. Style numbers 176 and 188–200 have no rhythm parts, so no rhythm will play. When one of these Styles is selected, turn ACMP on, then specify the chord in the left hand area to play Style parts other than the Rhythm part. The ACMP indicator does not appear on the display when the [ACMP ON/OFF] button is pressed. Check the on/off status of the [STYLE] lamp. When using a Style, press the [STYLE] button to turn on the [STYLE] lamp. PSR-E443 Owner’s Manual Specifications Keyboard Other Controllers Display Voices Effects Accompaniment Styles Dimensions (W x D x H) Weight Number of Keys Touch Response Pitch Bend Control Knobs Display Language Tone Generation Tone Generating Technology Number of Polyphony (Max.) Polyphony Preset Number of Voices Compatibility Reverb Chorus Types Master EQ Harmony Ultra-Wide Stereo Dual Split Functions Arpeggio type Melody Suppressor Number of Preset Styles Fingering Preset Style Control External Styles Other Features Pattern Preset Preset Recording/Playback (MIDI data only; audio not supported.) Function Recording Compatible Data Format Lesson/Guide Registration Overall Miscellaneous Memory Memory/ Connectivity Amplifiers/Speakers Connectivity Number of Buttons Metronome Tempo Range Transpose Tuning Scale One Touch Setting (OTS) Portable Grand Button Internal Memory External Storage Device DC IN Headphones/Output Sustain Pedal USB TO DEVICE USB TO HOST AUX IN (Stereo-mini) Amplifiers Speakers Power Supply Power Supply Music Database Preset Patterns Sections Number of Preset Songs Number of Songs Number of Tracks Data Capacity Playback Recording Adaptor Batteries Power Consumption Auto Power Off Function Included Accessories 946mm x 405mm x 140mm (37-1/4” x 15-15/16” x 5-1/2”) 6.8kg (15lbs 0oz.) (not including batteries) 61 Soft, Medium, Hard, Fixed Yes Yes LCD display English AWM Stereo Sampling 32 234 panel Voices + 24 Drum/SFX kits + 40 Arpeggio + 457 XGlite Voices GM, XGlite 9 types 5 types 6 types 26 types 3 types Yes Yes 150 types Yes 200 Multi finger ACMP ON/OFF, SYNC START, SYNC STOP, START/STOP, INTRO/ENDING/rit., MAIN/AUTO FILL, TRACK ON/OFF 5 305 20 5 30 10 6 (5 Melody + 1 Style/Pattern) Approx. 19,000 notes (when only “melody” tracks are recorded) SMF Formats 0 & 1 Original File Format (SMF0 conversion function) [1 LISTENING 2 TIMING 3 WAITING], [Repeat & Learn], [Chord Dictionary] 4 (×8 banks) Yes 11 – 280 -12 to 0, 0 to +12 427.0 – 440.0 – 453.0 Hz (approx. 0.2Hz increments) Yes Yes Yes Approx. 1.54MB USB flash memory DC IN 12V [PHONES/OUTPUT] x 1 [SUSTAIN] x 1 Yes Yes Yes 2.5W+2.5W 12cm×2 + 3cm×2 Users within U.S or Europe: PA-150 or an equivalent recommended by Yamaha Others: PA-5D, PA-150 or an equivalent Six “AA” size alkaline (LR6), manganese (R6) or Ni-MH rechargeable batteries 15W (PA-150) Yes • Owner’s Manual • Data List • AC Power Adaptor PA-150 or an equivalent Appendix Size/Weight * May not be included depending on your particular area. Please check with your Yamaha dealer. Accessories Optional Accessories • Music Rest • Online Member Product Registration • AC Power Adaptor: Users within U.S or Europe: PA-150 or an equivalent recommended by Yamaha Others: PA-5D, PA-150 or an equivalent • Keyboard Stand (L-2C) • Stereo Headphones (HPE-150/HPE-30) • Footswitch (FC4/FC5) • USB MIDI Interface for iPhone/iPod touch/iPad (i-UX1) * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. PSR-E443 Owner’s Manual 65 Index A D H A-B Repeat ................................... 26 AC Power Adaptor .................. 8, 12 Accessories .................................... 8 ACMP ..................................... 23, 44 Arpeggio ..................... 21, 24, 43, 54 Arpeggio Quantize ................ 43, 54 Arpeggio Type ....................... 21, 54 Arpeggio Velocity ........................ 54 ATTACK ...................................... 41 Attack Time ................................. 53 Audio file ..................... 8, 25, 30, 34 Auto Accompaniment ................. 44 Auto Accompaniment range ....... 23 AUTO FILL ................................. 44 Auto Power Off ...................... 15, 55 Auto Power Off Time .................. 55 AUX IN .................................. 22, 41 Aux In Volume ............................. 52 Data Err .........................................63 Del SMF .................................57, 62 Del USR ..................................57, 62 Demo Cancel ................................55 Demo Group .................................55 Demo Play Mode .........................55 Demo Song ...................................25 Disk Ful ........................................63 Display ..........................................16 Dual Voice ........................18, 40, 53 Harmony ................................ 20, 53 Harmony Type ....................... 20, 53 Harmony Volume ........................ 53 Headphones ................................. 14 B Backup .......................................... 34 Backup Clear ............................... 34 Backup parameters ...................... 34 BALANCE ................................... 41 Base Note ............................... 38, 54 Battery .................................... 13, 55 Battery Type ........................... 13, 55 Bayat ............................................. 38 Beat ............................................... 16 BGM (Background Music) ......... 50 C Appendix Can’tUse ....................................... 63 Chord ...................................... 16, 47 Chord Dictionary ......................... 49 Chord Type ................................... 48 CHORUS ...................................... 41 Chorus Depth ............................... 53 Chorus Type ........................... 35, 53 Complet. ....................................... 63 Computer ................................ 34, 54 Computer-related Operations ....... 9 CUTOFF ...................................... 41 66 PSR-E443 Owner’s Manual E EFFECT ..................................22, 41 EG (Envelope Generator) ......22, 41 ENDING .......................................44 EQ Setting ....................................37 Equal .............................................38 Error ..............................................63 Excellent .......................................28 Exit ..........................................57, 63 External Audio Device ................29 External Clock ..............................54 F Fast Forward .................................26 Fast Reverse ..................................26 File Control Display List .............57 File Ful ..........................................63 FILTER ...................................22, 41 Filter Cutoff ..................................53 Filter Resonance ..........................53 Fine Tuning ..................................36 Flash Clear ....................................34 Footswitch ..............................14, 43 Format .....................................57, 58 Front Panel ...................................10 Function ..................................16, 52 Function List ................................52 G GM System Level 1 .......................8 Good ..............................................28 Grade .......................................28, 54 I Individual Note Tuning ............... 54 Initial Send ................................... 54 Initialization ................................. 34 INTRO .......................................... 44 iPad/iPhone .................................. 34 iPhone/iPad Connection Manual .. 9 K Keyboard Out .............................. 54 Knob ................................. 22, 24, 41 Knob assignment ......................... 16 L Language ...................................... 55 Lesson .................................... 27, 54 Lesson Track ................................ 54 Limitations while recording ....... 31 Listen ............................................ 27 Load STY ............................... 57, 61 Load USR .............................. 57, 61 Local Control ............................... 54 M MAIN ........................................... 44 Main Voice ............................. 17, 53 Master EQ .................................... 37 Master EQ Type ..................... 37, 53 MASTER VOLUME .................. 15 MEASURE .................................. 16 Melody Suppressor ..................... 29 Melody Voice ............................... 51 Message List ................................ 63 Metronome ............................. 19, 54 Metronome Tempo ...................... 19 Metronome Volume ............... 19, 54 MIDI ............................................. 54 MIDI Basics ................................... 9 MIDI Reference ............................. 9 Music Database ........................... 23 Music Rest ..................................... 8 Index N S U no data .......................................... 63 no file ............................................ 63 Notation ........................................ 16 Save SMF ...............................57, 60 Save USR ................................57, 59 Scale ........................................38, 54 Scale Tuning ...........................38, 54 Section ..............................24, 44, 46 SMF (Standard MIDI File) ...60, 62 Song ........................................25, 50 Song Book ......................................9 Song Category ..............................25 Song Data .......................................9 Song Out .......................................54 Song title display language .........58 Song Volume ..........................51, 52 SPECIAL EFFECT ................22, 42 Specifications ...............................65 Split Point ...................18, 23, 47, 52 Split Voice ........................18, 40, 53 Style ........................................23, 44 STYLE FILE ..................................8 STYLE FILTER .....................22, 41 Style Out .......................................54 Style Volume ..........................47, 52 SUPPRESSOR PAN ....................41 Synchro Start ..........................23, 44 Synchro Stop ................................45 ULTRA WIDE STEREO ............ 42 Ultra-Wide Stereo ....................... 53 UnFormat ..................................... 63 USB ................................................ 8 USB [TO DEVICE] .................... 56 USB [TO HOST] ................... 11, 54 USB Flash Memory .................... 56 UseAdpt ....................................... 63 User Data ............................... 59, 60 User File ....................................... 62 User Song ............................... 32, 60 Octave ........................................... 53 OK ................................................ 28 One Touch Setting ....................... 36 Optional Song .............................. 25 Original Scale .............................. 39 OTS ............................................... 36 P Pan ................................................ 53 Panel Settings ............................... 33 Pattern ............................... 24, 44, 46 Pattern Volume ....................... 47, 52 Pause ............................................. 26 PC mode ....................................... 54 Pedal Function ............................. 54 PITCH BEND .............................. 36 Pitch Bend Range .................. 36, 52 Pitch Controls .............................. 36 Power ............................................ 15 Power source ................................ 13 Preset Scale types ........................ 38 Preset Song ............................. 25, 51 Preset Voice Types ....................... 17 Press & Hold ................................ 11 Protect ........................................... 63 Pure Major ................................... 38 Pure Minor ................................... 38 R Random ........................................ 50 Rast ............................................... 38 Rear Panel .................................... 11 Recording ..................................... 30 Registration Memory .................. 33 RELEASE .................................... 41 Release Time ................................ 53 Repeat & Learn ............................ 28 RESONANCE ............................. 41 Retrigger ................................. 24, 46 RETRIGGER RATE ................... 42 REVERB ...................................... 41 Reverb Depth ............................... 53 Reverb Type ........................... 35, 53 Rewind .......................................... 26 T Tap Start ........................................46 Tempo ...........................................46 Time Signature .......................19, 54 Timing ...........................................27 Touch Response .....................37, 52 Track .................................16, 30, 45 TRACK CONTROL ..............24, 45 Track On/Off ................................26 Transpose ................................36, 52 Troubleshooting ...........................64 Tuning ...........................................52 Tuning (Scale) ..............................39 V Very Good .................................... 28 Voice ....................................... 17, 40 Volume ................................... 52, 53 Volume (Pattern) .................... 47, 52 Volume (Song) ....................... 51, 52 Volume (Style) ....................... 47, 52 W Waiting ......................................... 27 Wide Type .................................... 53 X XGlite ............................................. 8 Y Your Tempo ........................... 27, 54 Appendix O PSR-E443 Owner’s Manual 67 MEMO LIMITED 1-YEAR WARRANTY ON PORTABLE KEYBOARDS (NP, NPV, PSRE, EZ, DGX230, DGX530, YPG AND YPT SERIES) Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and every Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer you, the Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from Yamaha’s authorized dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in the Warranted Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized Yamaha dealer or Yamaha Customer Service if you have any questions. Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor or materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If Yamaha elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty. This warranty does not cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation or failure to follow instructions according to the Owner’s Manual for this product; any shipment of the product (claims must be presented to the carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Service Center; (b) any unit which has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear and any periodic maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature or humidity; (e) damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f) RFI/EMI (Interference/noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if applicable. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This warranty covers only the Original Owner and is not transferable. In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful, contact Yamaha at the address, telephone number or website shown below. Yamaha may request that you send the defective product to a local authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to whether a dealer has been authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or check Yamaha’s website at www.Yamaha.com. Product(s) shipped for service should be packed securely and must be accompanied by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or other dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted for warranty service be found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only if requested by you and upon receipt of payment or acceptable arrangement for payment. Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO THE APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES. YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT YAMAHA’S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to assume for it any other express warranty. If you have any questions about service received or if you need assistance in locating an authorized Yamaha Servicer, please contact: CUSTOMER SERVICE Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, California 90620-1373 Telephone: 800-854-1569 www.yamaha.com Do not return any product to the above address without a written Return Authorization issued by YAMAHA. ©2012 Yamaha Corporation of America. For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 “Prisma Insurgentes”, Col. San Jose Insurgentes, Del. Benito Juarez, 03900, Mexico, D.F. Tel: 55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda. Rua Joaquim Floriano, 913 - 4º andar, Itaim Bibi, CEP 04534-013 São Paulo, SP. BRAZIL Tel: 011-3704-1377 ARGENTINA Yamaha Music Latin America, S.A., Sucursal Argentina Olga Cossettini 1553, Piso 4 Norte, Madero Este-C1107CEK Buenos Aires, Argentina Tel: 54-11-4119-7000 VENEZUELA Yamaha Music Latin America, S.A., Sucursal Venezuela C.C. Manzanares Plaza P4 Ofic. 0401- Manzanares-Baruta Caracas Venezuela Tel: 58-212-943-1877 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso No.7, Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, República de Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM/IRELAND Yamaha Music Europe GmbH (UK) Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, U.K. Tel: 01908-366700 GERMANY Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Europe GmbH Branch Switzerland in Zürich Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 044-387-8080 AUSTRIA Yamaha Music Europe GmbH Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 CZECH REPUBLIC/HUNGARY/ ROMANIA/SLOVAKIA/SLOVENIA Yamaha Music Europe GmbH Branch Austria (Central Eastern Europe Office) Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 POLAND/LITHUANIA/LATVIA/ ESTONIA Yamaha Music Europe GmbH Branch Poland Office ul. Wrotkowa 14 02-553 Warsaw, Poland Tel: 022-500-2925 BULGARIA Dinacord Bulgaria LTD. Bul.Iskarsko Schose 7 Targowski Zentar Ewropa 1528 Sofia, Bulgaria Tel: 02-978-20-25 MALTA Olimpus Music Ltd. The Emporium, Level 3, St. Louis Street Msida MSD06 Tel: 02133-2144 DMI7 NETHERLANDS/BELGIUM/ LUXEMBOURG Yamaha Music Europe Branch Benelux Clarissenhof 5-b, 4133 AB Vianen, Netherlands Tel: 0347-358 040 FRANCE Yamaha Music Europe 7 rue Ambroise Croizat, Zone d'activites Pariest, 77183 Croissy-Beaubourg, France Tel: 01-64-61-4000 ITALY Yamaha Music Europe GmbH, Branch Italy Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha Music Europe GmbH Ibérica, Sucursal en España Ctra. de la Coruna km. 17,200, 28231 Las Rozas (Madrid), Spain Tel: +34-91-639-88-88 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Music Europe GmbH Germany filial Scandinavia J. A. Wettergrensgata 1, Box 30053 S-400 43 Göteborg, Sweden Tel: +46 31 89 34 00 DENMARK Yamaha Music Europe GmbH, Tyskland – filial Denmark Generatorvej 6A, DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 NORWAY Yamaha Music Europe GmbH Germany Norwegian Branch Grini Næringspark 1, N-1361 Østerås, Norway Tel: 67 16 78 00 ICELAND Skifan HF Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 RUSSIA Yamaha Music (Russia) LLC. Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 OTHER EUROPEAN COUNTRIES Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA SOUTH AFRICA Global Music Instruments Unit 4, 130 Boeing Road East Bedfordview 2008 Postnet Suite 130, Private Bag X10020 Edenvale 1610, South Africa Tel: 27-11-454-1131 OTHER AFRICAN COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jebel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 MIDDLE EAST TURKEY/CYPRUS Yamaha Music Europe GmbH Merkezi Almanya Türkiye İstanbul Şubesi Maslak Meydan Sokak No:5 Spring Giz Plaza Bağımsız Böl. No:3, 34398 Şişli, İstanbul Tel: +90-212-999-8010 OTHER COUNTRIES Yamaha Music Gulf FZE LOB 16-513, P.O.Box 17328, Jebel Ali, Dubai, United Arab Emirates Tel: +971-4-881-5868 ASIA THE PEOPLE’S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co.,Ltd. 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDIA Yamaha Music India Pvt. Ltd. Spazedge building, Ground Floor, Tower A, Sector 47, Gurgaon- Sohna Road, Gurgaon, Haryana, India Tel: 0124-485-3300 INDONESIA PT. Yamaha Musik Indonesia (Distributor) Yamaha Music Center Bldg. Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 021-520-2577 KOREA Yamaha Music Korea Ltd. 8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong, Kangnam-Gu, Seoul, Korea Tel: 02-3467-3300 MALAYSIA Yamaha Music (Malaysia) Sdn., Bhd. No.8, Jalan Perbandaran, Kelana Jaya, 47301 Petaling Jaya, Selangor, Malaysia Tel: 03-78030900 PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music (Asia) Private Limited Block 202 Hougang Street 21, #02-00, Singapore 530202, Singapore Tel: 65-6747-4374 TAIWAN Yamaha Music & Electronics Taiwan Co.,Ltd. 3F, No.6, Section 2 Nan-Jing East Road, Taipei, Taiwan R.O.C. Tel: 02-2511-8688 THAILAND Siam Music Yamaha Co., Ltd. 3, 4, 15 and 16th floor, Siam Motors Building, 891/1 Rama 1 Road, Wangmai, Pathumwan, Bangkok 10330, Thailand Tel: 02-215-2622 VIETNAM Yamaha Music Vietnam Company Limited 15th Floor, Nam A Bank Tower, 201-203 Cach Mang Thang Tam St., Ward 4, Dist.3, Ho Chi Minh City, Vietnam Tel: +84-8-3818-1122 OTHER ASIAN COUNTRIES Yamaha Corporation Market Development Section Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OCEANIA AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Works LTD P.O.BOX 6246 Wellesley, Auckland 4680, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation Market Development Section Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 Yamaha Global Site http://www.yamaha.com/ Yamaha Downloads http://download.yamaha.com/ C.S.G., DMI Development Division ©2014 Yamaha Corporation Published 03/2014 PO##*.*-**B0 Printed in China ZH22090