Yamaha CLP-115 El manual del propietario

Categoría
Pianos digitales
Tipo
El manual del propietario

Este manual también es adecuado para

Clavinova Web site (English only)
http://www.yamahaclavinova.com/
Yamaha Manual Library
http://www2.yamaha.co.jp/manual/english/
DIC 244
Owner's Manual
Bedienungsanleitung
Mode d'emploi
Manual de instrucciones
Before using the Clavinova, be sure to read PRECAUTIONS on pages 6 -7.
Achten Sie darauf, vor Einsatz des Clavinova die VORSICHTSMASSNAHMEN auf Seite 6-7
durchzulesen.
Avant d'utiliser le Clavinova, lire attentivement la section
«PRECAUTIONS D'USAGE» aux
pages 6- 7.
Antes de utilizar el Clavinova, lea las
PRECAUCIONES que debe tener en cuenta en las páginas
6- 7.
IMPORTANT
Check your power supply
Make sure that your local AC mains voltage matches the voltage specified on the name plate
on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of
the main keyboard unit near the power cord. Make sure that the voltage selector is set for the
voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To
change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage
appears next to the pointer on the panel.
WICHTIG
Überprüfung der Stromversorgung
Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den
Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In
bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite
neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf
die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V
voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher,
bis der Zeiger auf den korrekten Spannungswert weist.
IMPORTANT
Contrôler la source d'alimentation
Vérifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans
certaines régions, l'instrument peut être équipé d'un sélecteur de tension situé sur le panneau
inférieur du clavier à proximité du cordon d'alimentation.
Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le
sélecteur de tension est réglé sur 240 V au départ d'usine. Pour modifier ce réglage, utilisez un
tournevis à lame plate pour tourner le sélecteur afin de mettre l'indication correspondant à la
tension de votre région vis à vis du repère triangulaire situé sur le panneau.
IMPORTANTE
Verifique la alimentación de corriente
Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión
especificada en la placa de características del panel inferior. En algunas zonas puede haberse
incorporado un selector de tensión en el panel inferior de la unidad del teclado principal, cerca del
cable de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su
área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el
ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la
tensión correcta al lado del indicador del panel.
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
C
2003 Yamaha Corporation
WB29560 30?AP???.?-01A0 Printed in Indonesia
CLP-115
CLP-115
Introduction
92-469
1
(bottom)
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS:
Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these
graphics appears on this page. Please observe all cautions
indicated on this page and those indicated in the safety
instruction section.
See bottom of Keyboard enclosure for graphic symbol markings.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature
accompanying the product.
The lightning flash with arrowhead
symbol, within the equilateral trian-
gle, is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclo-
sure that may be of sufficient magni-
tude to constitute a risk of electrical
shock.
IMPORTANT NOTICE:
All Yamaha electronic products
are tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so
unless specifically authorized by Yamaha. Product perfor-
mance and/or safety standards may be diminished.
Claims filed under the expressed warranty may be denied
if the unit is/has been modified. Implied warranties may
also be affected.
SPECIFICATIONS SUBJECT TO CHANGE:
The
information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES:
Yamaha strives to pro-
duce products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-
rechargable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes
necessary, contact a qualified service representative to
perform the replacement.
Warning:
Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away
from children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice:
Should this product become damaged
beyond repair, or for some reason its useful life is consid-
ered to be at an end, please observe all local, state, and
federal regulations that relate to the disposal of products
that contain lead, batteries, plastics, etc.
NOTICE:
Service charges incurred due to lack of knowl-
edge relating to how a function or effect works (when the
unit is operating as designed) are not covered by the man-
ufacturer’s warranty, and are therefore the owners respon-
sibility. Please study this manual carefully and consult
your dealer before requesting service.
NAME PLATE LOCATION:
The graphic below indi-
cates the location of the name plate. The model number,
serial number, power requirements, etc., are located on
this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided
below and retain this manual as a permanent record of
your purchase.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Model
Serial No.
Purchase Date
CLP-115
About this Owner’s Manual
ENGLISH
3
Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can
fully take advantage of the advanced and convenient functions of the CLP-115.
We also recommend that you keep this manual in a safe and handy place for future reference.
About this Owner’s Manual
This manual consists of three main sections: “Introduction, “Reference” and Appendix.
Introduction (page 2):
Please read this section first.
Reference (page 13):
This section explains how to make detailed settings for the CLP-115’s various functions.
Appendix (page 33):
This section introduces reference material.
*The model CLP-115 will be referred to as the CLP/Clavinova in this Owner’s Manual.
*The illustrations of the controls in this owner’s manual are for instructional purposes only and actual appearance of
the controls may be somewhat different on your instrument.
Trademarks:
•Apple and Macintosh are trademarks of Apple Computer, Inc.
•Windows is a registered trademark of Microsoft® Corporation.
•All other trademarks are the property of their respective holders.
COPYRIGHT NOTICE
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others copyrights. Such copyrighted materials include, without limitation, all
computer software, MIDI files and WAVE data. Any unauthorized use of such programs and contents outside of per-
sonal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
“The Clavinova-Computer Connection,”
is a supplementary guidebook that describes, for beginners, what you
can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is
not written for a specific model). The document is available as a PDF file (in English) at the following Internet address:
Clavinova Web site (English only):
http://www.yamahaclavinova.com/
Yamaha Manual Library:
http://www2.yamaha.co.jp/manual/english/
CLP-115
Table of Contents
ENGLISH
4
Table of Contents
Introduction
Application Index........................................ 5
PRECAUTIONS............................................. 6
Accessories .................................................. 8
Maintenance ............................................... 8
Features....................................................... 9
Before Using the CLP-115......................... 10
Key Cover ...........................................................10
Music Rest ..........................................................10
Turning the Power On.......................................11
Setting the Volume.............................................11
Using Headphones.............................................12
Reference
Panel Controls and Terminals................... 14
Listening to the Demo Songs ................... 15
Listening to 50 Piano Preset Songs .......... 16
Selecting & Playing Voices........................ 17
Selecting Voices..................................................17
Using the Pedals .................................................17
Adding Variations to the Sound – Reverb........18
Combining Two Voices (Dual mode)...............19
Transposition .....................................................20
Fine-tuning the Pitch .........................................20
Using the Metronome........................................21
About MIDI ............................................... 23
Connecting a Personal Computer ............ 24
MIDI Functions.......................................... 26
MIDI Transmit/Receive Channel Selection......26
Local Control ON/OFF......................................26
Program Change ON/OFF.................................27
Control Change ON/OFF ..................................27
Troubleshooting ....................................... 28
Options...................................................... 28
Keyboard Stand Assembly ........................ 29
Index ......................................................... 32
Appendix
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI /
Formato de datos MIDI .......................... 34
MIDI Implementation Chart .....................38
Specifications / Technische Daten /
Caractéristiques techniques /
Especificaciones ...................................... 39
CLP-115
Application Index
ENGLISH
5
Application Index
Use this index to find reference pages that may be helpful for your particular application and situation.
Listening
Listening to demo songs with different voices...................................................... “Listening to the Demo Songs” on page 15
Listening to songs from “50 Greats for the Piano ...................................... “Listening to 50 Piano Preset Songs on page 16
Playing
Using three pedals ....................................................................................................................... “Using the Pedals” on page 17
Playing an accompaniment that matches pitch ............................................................................. “Transposition on page 20
Fine-tuning the pitch of the entire instrument when you play the CLP-115
along with other instruments or CD music.......................................................................“Fine-tuning the Pitch on page 20
Changing voices
Viewing the list of voices............................................................................................................. “Selecting Voices on page 17
Simulating a concert hall ....................................................................Adding Variations to the Sound – Reverb” on page 18
Combining two voices............................................................................... “Combining Two Voices (Dual mode)” on page 19
Practicing
Practicing with an accurate and steady tempo .................................................................“Using the Metronome” on page 21
Connecting the CLP-115 to other devices
What is MIDI? ....................................................................................................................................About MIDI” on page 23
Connecting the computer ...............................................................................“Connecting a Personal Computer” on page 24
Assembling
Assembling and disassembling the CLP-115 ......................................................“Keyboard Stand Assembly” on pages 29–31
CLP-115
PRECAUTIONS
ENGLISH
6
(1)B-7
1/2
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions
include, but are not limited to, the following:
Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
Use only the supplied power cord/plug.
Do not place the power cord near heat sources such as heaters
or radiators, and do not excessively bend or otherwise damage
the cord, place heavy objects on it, or place it in a position
where anyone could walk on, trip over, or roll anything over it.
Do not open the instrument or attempt to disassemble the inter-
nal parts or modify them in any way. The instrument contains no
user-serviceable parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in
damp or wet conditions, or place containers on it containing liq-
uids which might spill into any openings.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If the power cord or plug becomes frayed or damaged, or if there
is a sudden loss of sound during use of the instrument, or if any
unusual smells or smoke should appear to be caused by it,
immediately turn off the power switch, disconnect the electric
plug from the outlet, and have the instrument inspected by qual-
ified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the instrument or other property. These precautions include, but are not limited
to, the following:
When removing the electric plug from the instrument or an out-
let, always hold the plug itself and not the cord. Pulling by the
cord can damage it.
Remove the electric plug from the outlet when the instrument is
not to be used for extended periods of time, or during electrical
storms.
Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality,
or possibly cause overheating in the outlet.
Read carefully the attached documentation explaining the
assembly process. Failure to assemble the instrument in the
proper sequence might result in damage to the instrument or
even injury.
Do not expose the instrument to excessive dust or vibrations, or
extreme cold or heat (such as in direct sunlight, near a heater,
or in a car during the day) to prevent the possibility of panel dis-
figuration or damage to the internal components.
Do not use the instrument in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices. Otherwise,
the instrument, TV, or radio may generate noise.
Do not place the instrument in an unstable position where it
might accidentally fall over.
Before moving the instrument, remove all connected cables.
Do not place the instrument against a wall (allow at least 3 cm/
one-inch from the wall), since this can cause inadequate air cir-
culation, and possibly result in the instrument overheating.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly
Location
CLP-115
PRECAUTIONS
ENGLISH
7
Before connecting the instrument to other electronic compo-
nents, turn off the power for all components. Before turning the
power on or off for all components, set all volume levels to mini-
mum. Also, be sure to set the volumes of all components at their
minimum levels and gradually raise the volume controls while
playing the instrument to set the desired listening level.
When cleaning the instrument, use a soft, dry or slightly damp
cloth. Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Take care that the key cover does not pinch your fingers, and do
not insert a finger or hand in any gaps on the key cover or
instrument.
Never insert or drop paper, metallic, or other objects into the
gaps on the key cover, panel or keyboard. If this happens, turn
off the power immediately and unplug the power cord from the
AC outlet. Then have the instrument inspected by qualified
Yamaha service personnel.
Do not place vinyl, plastic or rubber objects on the instrument,
since this might discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the instru-
ment, and do not use excessive force on the buttons, switches
or connectors.
Do not operate the instrument for a long period of time at a high
or uncomfortable volume level, since this can cause permanent
hearing loss. If you experience any hearing loss or ringing in the
ears, consult a physician.
Do not place the bench in an unstable position where it might
accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a
tool or step-ladder or for any other purpose might result in acci-
dent or injury.
Only one person should sit on the bench at a time, in order to
prevent the possibility of accident or injury.
If the bench screws become loose due to extensive long-term
use, tighten them periodically using the included tool.
Always turn the power off when the instrument is not in use.
Connections
Maintenance
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
(1)B-7
2/2
CLP-115
Accessories / Maintenance
ENGLISH
8
Accessories
“50 Greats for the Piano” (Music Book)
Owner’s Manual
This manual contains complete instructions for operating your CLP-115.
Quick Operation Guide
Bench
A bench may be included or optional, depending on your locale.
Maintenance
Clean the instrument using a dry or slightly damp soft cloth (wring well).
CAUTION
Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber
products on the instrument.
Otherwise, the panel or keys may become discolored or degraded.
CAUTION
Before using the CLP-115, be sure to read “PRECAUTIONS” on pages 6 – 7.
Tuning
Unlike an acoustic piano, the CLP-115 does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport the CLP-115 along with your other belongings. You can move the
unit as it is (assembled) or you can disassemble the unit before moving.
Tr ansport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the
instrument to excessive vibration or shock.
CLP-115
Features
ENGLISH
9
Features
The Yamaha Clavinova CLP-115 digital piano offers unmatched sonic realism and natural grand-piano type playability as
well as Yamahas original
AWM Stereo Sampling
tone-generation technology for rich, musical voices, and a special
Graded Hammer
keyboard that provides graded key weight and response throughout the keyboard range.
The Grand Piano 1 and 2 voices feature samples painstakingly recorded from a full concert grand piano. The E. Piano 1
voice features a single velocity-switched sample (Dynamic Sampling) and E. Piano 2 voice features two velocity-switched
sample.
The CLP-115 sounds much closer to a true acoustic piano.
MASTER
VOLUME
DEMO
METRONOME
VOICE
MIN MAX
MIDI
INOUTTHRU
MASTER
VOLUME
DEMO
METRONOME
VOICE
MIN MAX
POWER
PHONES
PEDAL
MIDI [IN/OUT/THRU]
Connect a MIDI device to this connector to
use various MIDI functions (pages 24–25).
(About MIDI—page 23)
[PEDAL]
Connect the pedal cord
here to use the CLP-115’s
pedals (page 30).
[MASTER VOLUME]
Adjust the volume level using this control (page 11).
[DEMO]
Playback of a demo song and 50 preset songs is available (page 15).
[METRONOME]
Control the metronome functions (page 21).
[VOICE]
Select voices from 10 internal sounds, including Grand Piano 1 and 2 (page 17).
You can also combine two voices simultaneously (page 19), select various reverb
effects (page 18), etc.
[PHONES]
A set of standard stereo
headphones can be plugged
in here for private
practice (page 12).
CLP-115
Before Using the CLP-115
ENGLISH
10
Before Using the CLP-115
Key Cover
To open the key cover:
Lift the cover slightly, then push and slide it open.
To close the key cover:
Slide the cover toward you and gently lower the cover
over the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be care-
ful to avoid catching fingers (yours or others, especially children’s) between the cover and main unit.
CAUTION
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument.
Music Rest
To raise the music rest:
1. Pull the music rest up and toward yourself as far as it will go.
2. Flip down the two metal supports at the left and right on
the rear of the music rest.
3. Lower the music rest so that it rests on the metal sup-
ports.
To lower the music rest:
1. Pull the music rest toward yourself as far as it will go.
2. Raise the two metal supports (at the rear of the music rest).
3. Gently lower the music rest backward until it is all the
way down.
CAUTION
Do not try to use the music rest in a half-raised position.
When lowering the music rest, do not release your hands
from the music rest until it is all the way down.
Be careful to avoid catching your fingers
when opening or closing the cover.
CAUTION
CLP-115 Before Using the CLP-115
ENGLISH
11
Turning the Power On
1. Connect the power cord.
Insert the plugs at the ends of the cord: one into the AC INLET on the CLP-115, and the other into a standard AC out-
let.
In some areas, a plug adaptor may be provided to match the pin configuration of AC wall outlets in your area.
(The shape of the plug differs depending on locale.)
2. Turn the power on.
Press the [POWER] button.
•The power indicator located below the left end of the keyboard lights up.
When you’re ready to turn off the power, press the [POWER] button again.
•The power indicator turns off.
Setting the Volume
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
CAUTION
Do not use the CLP-115 at a high volume level for a long period of time, or your hearing may be damaged.
TIP
Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the
power is still on.
12
(bottom surface)
Power indicator
[POWER]
M
A
S
T
R
E
V
O
L
U
M
E
D
E
M
O
M
E
T
R
O
N
O
M
E
V
O
I
C
E
M
I
N
M
A
X
TERMINOLOGY
MASTER VOLUME:
The volume level of the entire keyboard sound
TIP
You can also adjust the [PHONES] output level using the [MASTER VOLUME] control.
MASTER
VOLUME
MIN MAX
The level decreases. The level increases.
CLP-115 Before Using the CLP-115
ENGLISH
12
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are
using only one pair of headphones, you can plug them into either
jack.)
Using the Headphone Hanger
A headphone hanger is included in the CLP-115 package so that you can hang
the headphones on the CLP-115. Install the headphone hanger using the
included two screws (4 × 10mm) as shown in the figure.
CAUTION
Do not hang anything other than the headphones on the hanger. Otherwise,
the CLP-115 or the hanger may be damaged.
PHONES
M
A
S
T
R
E
V
O
L
U
M
E
DE
MO
M
E
T
R
O
N
O
M
E
V
O
I
C
E
M
I
N
MA
X
standard stereo
phone plug
bottom surface
PH
ON
ES
CLP-115
13
ENGLISH
Reference
Panel Controls and Terminals ................................. 14
Listening to the Demo Songs................................... 15
Listening to 50 Piano Preset Songs.......................... 16
Selecting & Playing Voices ....................................... 17
Selecting Voices ........................................................... 17
Using the Pedals .......................................................... 17
Adding Variations to the Sound – Reverb.................. 18
Combining Two Voices (Dual mode)......................... 19
Tr ansposition............................................................... 20
Fine-tuning the Pitch.................................................. 20
Using the Metronome................................................. 21
About MIDI.............................................................. 23
Connecting a Personal Computer ........................... 24
MIDI Functions........................................................ 26
MIDI Transmit/Receive Channel Selection ............... 26
Local Control ON/OFF............................................... 26
Program Change ON/OFF ......................................... 27
Control Change ON/OFF ........................................... 27
Troubleshooting ....................................................... 28
Options ..................................................................... 28
Keyboard Stand Assembly........................................ 29
Index ......................................................................... 32
This section explains how to make detailed settings for the
CLP-115’s various functions.
CLP-115 Panel Controls and Terminals
ENGLISH
14
Panel Controls and Terminals
Top panel
MASTER
VOLUME
DEMO
METRONOME
VOICE
MIN MAX
POWER
MIDI
INOUTTHRU
PHONES
MASTER
VOLUME
DEMO
METRONOME
VOICE
MIN MAX
C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4
C5
D5
E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7
B-1A-1
PEDAL
8
1
9
0
A
2
6
7
3
4
5
1 [POWER] ....................................... P11
2 [MASTER VOLUME]....................... P11
3 [DEMO] ...................................P15–16
4 [METRONOME]........................P21–22
5 [VOICE]....................................P17–19
6 [PHONES] ..................................... P12
7 MIDI [IN] [OUT] [THRU]................ P23
8 [PEDAL]......................................... P30
9 Soft (Left) Pedal ............................ P18
0 Sostenute (Center) Pedal............... P18
A Damper (Right) Pedal ................... P17
CLP-115 Listening to the Demo Songs
ENGLISH
15
Listening to the Demo Songs
Demo songs are provided that effectively demonstrate each of the CLP-115’s voices.
1. Turn on the power.
(In case the power is not turned ON) Press the [POWER] button.
When you start playing, adjust the [MASTER VOLUME] control to the most
comfortable listening level.
2. Engage Demo mode.
Press the [DEMO] button to engage Demo mode. The [DEMO] button indicator
will light.
3. Play a Voice demo.
While holding down the [DEMO] button, press one of the C1–A1 keys to select
and start the corresponding demo song. Starting with the selected tune, the
demo songs will play in sequence until stopped.
Demo Song List
Demo songs are original (©2002 Yamaha Corporation) except for the three
songs listed below.
Refer to the voice list on page 17 for voice key assignments.
The demo songs listed below are short re-arranged excerpts from the original
compositions.
Adjusting the Volume
Use the
[MASTER VOLUME] control to adjust the volume.
4. Stop the Voice demo.
Press the [DEMO] button to stop playback.
Procedure
NOTE
Refer to the voice list on
page 17 for more information on
the characteristics of each pre-
set voice.
TERMINOLOGY
Mode:
A mode is a condition or status
under which you can execute a
certain function. In Demo mode,
you can play back demo songs.
NOTE
You cannot adjust the tempo of
demo songs.
KeyVoice Name Title Composer
C1 GrandPiano1 Consolation No.3 F. Liszt
E1 Harpsichord1 Gavotte J.S. Bach
F1 Harpsichord2 Invention No.1 J.S. Bach
C1
The lowest key
A1
DEMO
CLP-115 Listening to 50 Piano Preset Songs
ENGLISH
16
Listening to 50 Piano Preset Songs
The CLP-115 provides performance data for 50 piano songs. You can simply listen to these songs.
You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset
songs.
1. Engage Preset Song mode.
Press the [DEMO] button to engage Preset Song mode. The [DEMO] button
indicator will light.
2. Play a preset song.
While holding down the [DEMO] button, press one of the C2–C
6 keys to select
and start the corresponding tune. To play all preset songs in sequence, while
holding down the [DEMO] button, press the D6 key.
Adjusting the Volume
Use the [MASTER VOLUME] control to adjust the volume.
3. Stop playback.
Playback will stop automatically when the selected preset song has finished. To
stop the song during playback (or continuous playback), press the [DEMO] but-
ton.
•To continue playing other songs, see procedure 2 above.
Procedure
TERMINOLOGY
Song:
On the CLP-115, performance
data is called a “Song.This
includes demo songs and piano
preset tunes.
TIP
You can play the keyboard
along with the preset song. You
can change the voice playing on
the keyboard.
TIP
You can adjust the Reverb type
(page 18) that is applied to the
voice you play on the keyboard
and to the preset song play-
back.
NOTE
The default tempo is automati-
cally selected whenever a new
preset song is selected, and
when a new preset song begins
playback.
NOTE
To adjust the tempo of the preset
song playback, see page 21.
NOTE
When you select a different song
(or a different song is selected
during chained playback), an
appropriate reverb type will be
selected accordingly.
NOTE
MIDI reception is not possible in
Piano Song mode. Piano song
data is not transmitted via the
MIDI connectors.
C2 D6
C 6
The highest key
DEMO
CLP-115 Selecting & Playing Voices
ENGLISH
17
Selecting & Playing Voices
Selecting Voices
While holding down the [VOICE] button, press one of the C1–A1 keys to select and
start the corresponding voice.
Then, when you start playing, adjust the [MASTER VOLUME] control to the most com-
fortable listening level.
Using the Pedals
Damper (Right) Pedal
The damper pedal functions in the same way as a
damper pedal on an acoustic piano. When the
damper pedal is pressed, notes sustain longer.
Releasing the pedal immediately stops (damps) any
sustained notes.
Procedure
TIP
To understand the characteris-
tics of various voices, listen to
demo songs for each voice
(page 15).
TERMINOLOGY
Voice:
On the CLP-115, a voice means
a “tone” or “tonal color.
NOTE
Selecting a voice automatically
engages the best-suited reverb
type and depth (page 18) for
that particular voice.
KeyVoice Name Description
C1 Grand Piano 1
Recorded samples from a full concert grand piano. Perfect for classical
compositions as well as any other style that requires acoustic piano.
C
1Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.
D1 E.Piano 1 An electronic piano sound created by FM synthesis. Good for popu-
lar music.
D
1 E.Piano 2
The sound of an electric piano using hammer-struck metallic “tines. Soft
tone when played lightly, and an aggressive tone when played hard.
E1 Harpsichord 1 The definitive instrument for baroque music. Since harpsichord uses
plucked strings, there is no touch response.
F1 Harpsichord 2 Mixes the same voice an octave higher for a more brilliant tone.
F
1 Vibraphone Vibraphone played with relatively soft mallets. It has a tremolo effect
that is typical for vibraphone.
G1
Church Organ 1
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for
sacred music from the Baroque period.
G
1
Church Organ 2
This is the organ’s full coupler sound, often associated with Bach’s
“Toccata and Fugue”.
A1 Strings Spacious and large-scale string ensemble. Try combining this voice
with piano in DUAL mode.
C1 D1 E1 F1 G1 A1
C 1
D 1
F 1
G 1
The lowest key
VOICE
When you press the damper pedal
here, the notes you play before you
release the pedal sustain longer.
NOTE
If the damper pedal doesn’t
work, make sure that the pedal
cord is properly plugged into the
main unit (page 30).
CLP-115 Selecting & Playing Voices
ENGLISH
18
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and
press the sostenuto pedal while the note(s) are
held, those notes will sustain as long as you hold
the pedal (as if the damper pedal had been pressed)
but all subsequently played notes will not be sus-
tained. This makes it possible to sustain a chord,
for example, while other notes are played “stac-
cato.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while
the pedal is pressed. The soft pedal will not affect notes that are already playing when it
is pressed.
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
When you select a reverb, the reverb is automatically turned on.
While holding down the [VOICE] button, press one of the C2–E2 keys to select a reverb
type.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the [VOICE] button. The depth range is from 0 through 20.
When you press the sostenuto
pedal here while holding the note,
the note will sustain as long as you
hold the pedal.
Procedure
KeyReverb Type Description
C2 Room This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C
2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
D2 Hall2 For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
C2 D2 E2
C 2
D 2
The lowest key
VOICE
TIP
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
TIP
depth 0: no effect
depth 20: maximum reverb
depth
C3: depth 0
G 4: depth 20
The lowest key
VOICE
The depth value increases as you press higher keys.
NOTE
Organ and string voices will con-
tinue to sound for as long as the
sostenuto pedal is depressed.
CLP-115 Selecting & Playing Voices
ENGLISH
19
Combining Two Voices (Dual mode)
You can play two voices simultaneously across the entire range of the keyboard. In this way, you
can simulate a melody duet or combine two similar voices to create a thicker sound.
1. Engage Dual mode.
While holding down the [VOICE] button, press two of the C1–A1 keys at simul-
taneously (or press one key while holding another).
Refer to the voice list on page 17 for available voices.
According to the voice priority shown in the voice list (page 17), the voice
assigned to the lower keyboard will be designated as Voice 1 (the other voice will
be designated as Voice 2).
You can make the following settings only in Dual mode:
Setting the Octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 inde-
pendently. Depending on which voices you combine in Dual mode, the combi-
nation may sound better if one of the voices is shifted up or down an octave.
While holding down the [VOICE] button, press one of the C5–F5 keys.
Setting the Balance
You can set one voice as the main voice, and another voice as a softer, mixed voice.
While holding down the [VOICE] button, press one of the F
5–F
6 keys.
A setting of “0” produces an equal balance between the two Dual mode voices.
Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and set-
tings above “0” increases the volume of Voice 1 in relation to Voice 2.
2. Exit Dual mode and return to normal play mode.
While holding down the [VOICE] button, press one of the C1–A1 keys.
Procedure
NOTE
You cannot assign the same
voice to Voice 1 and Voice 2
simultaneously in Dual mode.
TIP
Reverb in Dual Mode
The reverb type assigned to
Voice 1 will take priority over the
other. (If the reverb is set to
OFF, Voice 2 reverb type will be
in effect.) Reverb depth setting
(
page 18
) will be applied only to
Voice 1.
C1 A1
The lowest key
VOICE
C5 F5
VOICE
The highest key
For setting
the octave. (C5–F5)
C5 key: –1 (Voice 1), C
5 key: 0 (Voice 1), D5 key: +1(Voice 1),
D
5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2)
F
5
F 6
-5
-6 -4 -2
+1 +3 +6
-3 -1 0 +2 +4 +5
VOICE
The highest key
For setting the balance. (F
5–F
6)
CLP-115 Selecting & Playing Voices
ENGLISH
20
Transposition
The CLP-115’s Transpose function makes it possible to shift the pitch of the entire keyboard up or
down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch
of the keyboard to the range of a singer or other instruments.
For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way,
you can play a song as though it were in C major, and the CLP-115 will transpose it to the key of F.
While holding down the A-1 and C
0 keys, press one of the F
2–F
3 keys to set the
desired amount of transposition.
Pressing the
C3 key produces normal keyboard pitch. Pressing the key to the left of C3
(=B2) transposes the pitch of the keyboard down a semitone, the next key to the left
(=B
2) transposes down a whole tone (two semitones), etc., down to the F
2 key, which
transposes down six semitones. Upward transposition is accomplished in the same way
using the keys to the right of C3, up to F
3, which transposes up six semitones.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument. This function is useful when you play the CLP-
115 along with other instruments or CD music.
To tune up (in about 0.2Hz steps):
Hold down the A-1 and
B-1
keys simultaneously and press any key between C3 and B3.
To tune down (in about 0.2Hz steps):
Hold down the A-1 and
A
-1
keys simultaneously and press any key between C3 and
B3.
To restore standard pitch:
Hold down the A-1, A
-1 and B-1 simultaneously and press any key between C3 and B3.
Setting range: 427.0-453.0 Hz
Standard pitch: 440.0 Hz
Procedure
TERMINOLOGY
Transpose:
Changing the key signature of a
song. On the CLP-115, trans-
posing shifts the pitch of the
entire keyboard.
TIP
Notes below and above the A-1
.... C7 range of the CLP-115
sound one octave higher and
lower, respectively.
A
-1
C
0
C3
Normal
pitch.
Transpose
down.
Transpose
up.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F
2
F
3
TERMINOLOGY
Hz (Hertz):
This unit of measurement refers
to the frequency of a sound and
represents the number of times
a sound wave vibrates in a sec-
ond.
Procedure
C3 B3
A-1 B-1
A-1
A
-1
A
-1
A-1 B-1
To tune up To tune down To restore standard pitch
CLP-115 Selecting & Playing Voices
ENGLISH
21
Using the Metronome
The CLP-115 features a built-in metronome (a device that keeps an accurate tempo) that is conve-
nient for practicing.
1. Start the metronome.
Press the [METRONOME] button to turn on the metronome.
Determines the time signature
While holding down the [METRONOME] button, press one of the C3–F3 keys.
Adjusting the tempo
The tempo of the metronome and preset song playback can be set from 32 to
280 beats per minute.
While holding down the [METRONOME] button, press a sequence of C4–A4
keys to specify a three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo
“95, press the C4 (0), A4 (9) and F4 (5) keys in sequence.
To increase the tempo value in steps of one, while holding down the [METRO-
NOME]
button, press the C
5 key. To decrease the tempo value in steps of one,
while holding down the [METRONOME] button, press the B4 key.
To increase the tempo value in steps of ten, while holding down the [METRO-
NOME]
button, press the D5 key. To decrease the tempo value in steps of ten,
while holding down the [METRONOME] button, press the A
4 key.
To set the default tempo (the metronomes original tempo or the song’s original
tempo), while holding down the [METRONOME] button, press the C5 key.
Procedure
NOTE
During preset song playback,
you can set the tempo from 20
to 400 beats per minute,
depending on the song data.
D
3
C
3
C3
D3
E3
F3
METRONOME
The highest key
C3 key: No downbeat, C
3 key: 2/4, D3 key: 3/4, D
3 key: 4/4, E3 key: 5/4, F3 key: 6/4
C4 A4
METRONOME
The highest key
024579
8631
B4 C5 D5
C
5
A
4
METRONOME
The highest key
CLP-115 Selecting & Playing Voices
ENGLISH
22
Adjusting the volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button, press one of the C1–G2 keys
to determine the volume.
2. Stop the metronome.
Turn off the metronome by pressing the [METRONOME] button.
C1 G2
METRONOME
The lowest key
The volume level increases as you press higher keys.
CLP-115 About MIDI
ENGLISH
23
About MIDI
MIDI (Musical Instrument Digital Interface) is a standard format for
data transmission and reception. It enables the transfer of performance
data and commands between MIDI devices and personal computers.
Using MIDI, you can control a connected MIDI device from the CLP-
115, or control the CLP-115 from a connected MIDI device or com-
puter.
MIDI connectors
MIDI [IN]: Receives MIDI data.
MIDI [OUT]: Tr ansmits MIDI data.
MIDI [THRU]: Tr ansmits data received at the MIDI [IN] connector, passing it through
the unit unmodified.
MIDI cables
Prepare dedicated MIDI cables.
TIP
MIDI performance data and
commands are transferred in
the form of numeric values.
TIP
Since MIDI data that can be
transmitted or received varies
depending on the type of MIDI
device, check the “MIDI Imple-
mentation Chart” to find out
what MIDI data and commands
your devices can transmit or
receive. The CLP-115’s MIDI
Implementation Chart appears
on page 38.
MIDI
INOUTTHRU
TIP
You can also obtain detailed
information about MIDI from
various music books and other
publications.
CLP-115 Connecting a Personal Computer
ENGLISH
24
Connecting a Personal Computer
You can enjoy computer music data on the CLP-115 by connecting a computer to the MIDI jack.
There are two methods by which to connect the Clavinova to a personal computer:
1. Use a MIDI interface and the CLP-115’s MIDI connectors (page 25).
2. Use the USB port on the computer and a USB interface (model UX16, UX96, or UX256) (page 25).
NOTE
When the CLP-115 is used as a tone module, performance data with voices that are not found on the CLP-115 will not
be played correctly.
“The Clavinova-Computer Connection,” is a supplementary guidebook that describes, for beginners, what you
can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is
not written for a specific models). The document is available as a PDF file (in English) at the following Internet
address:
Clavinova Web site (English only):
http://www.yamahaclavinova.com/
Yamaha Manual Library:
http://www2.yamaha.co.jp/manual/english/
NOTE
Before you connect the CLP-115 to a personal computer, first turn off the power to both the CLP-115 and the computer.
After you make the connections, turn on the power to the computer first, then turn on the power to the CLP-115.
CLP-115 Connecting a Personal Computer
ENGLISH
25
1. Using a MIDI interface and the CLP-115’s MIDI connectors
Connection
Use a MIDI interface to connect a computer to the CLP-115 using special MIDI cables.
2. Connecting the computer’s USB port to the CLP-115 via a USB interface, such as
the UX16,UX96, or UX256
Connect the computer’s USB port to the USB interface (such as the UX16, UX96, or UX256) using a USB cable. Install
the driver (that came with the USB interface) on the computer, and connect the USB interface to the CLP-115 using a
serial cable or MIDI cables.
For more information, refer to the instruction manual for the USB interface.
An example of connecting the USB interface to the CLP-115 using MIDI cables
MIDI OUT
MIDI
OUT
MIDI
IN
MIDI
IN
MIDI
OUT
MIDI
IN
Windows Macintosh
CLP-115
MIDI interface
MIDI interface
MIDI
INOUTTHRU
USB cable
MIDI cables
CLP-115
USB interface
computer
MIDI
INOUTTHRU
MASTER
VOLUME
DEMO
METRONOME
VOICE
MIN MAX
POWER
CLP-115 MIDI Functions
ENGLISH
26
MIDI Functions
You can make detailed adjustments to MIDI settings.
For more information about MIDI, see the “About MIDI” section (page 23).
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equip-
ment must be matched for proper data transfer.
This parameter enables you to specify the channel on which the CLP-115 transmits or
receives MIDI data.
Setting the transmit channel
While holding down the A-1 and C
0 keys, press one of the C1–E2 keys.
Setting the receive channel
While holding down the A-1 and C
0 keys, press one of the C4–F5 keys.
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the CLP-115 keyboard controls its
internal tone generator, allowing the internal voices to be played directly from the key-
board. This situation is “Local Control On, since the internal tone generator is con-
trolled locally by its own keyboard.
Local control can be turned OFF, however, so that the CLP-115 keyboard does not play
the internal voices, but the appropriate MIDI information is still transmitted via the
MIDI OUT connector when notes are played on the keyboard. At the same time, the
internal tone generator responds to MIDI information received via the MIDI IN con-
nector.
While holding down the A-1 and C
0 keys, press the C6 key.
NOTE
Demo and preset song data are
not transmitted via MIDI.
NOTE
In Dual mode, Voice 1 data is
transmitted on its specified
channel and Voice 2 data is
transmitted on the next greater
channel number relative to the
specified channel. In this mode,
no data is transmitted if the
transmit channel is set to “OFF.
TIP
ALL:
A “Multi-timbre” Receive mode
is available. It allows simulta-
neous reception of different
parts on all 16 MIDI channels,
enabling the CLP-115 to play
multi-channel song data
received from a music computer
or sequencer.
1+2:
A “1+2” Receive mode is avail-
able. It allows simultaneous
reception on channels 1 and 2
only, enabling the CLP-115 to
play 1 and 2 channel song data
received from a music computer
or sequencer.
TIP
Program change and other like
channel messages received will
not affect the CLP-115’s panel
settings or the notes you play
on the keyboard.
NOTE
The CLP-115 does not receive
MIDI data when it is in Demo or
Preset Song mode.
Procedure
Procedure
A-1 C1 C4 F5
E2
OFF
C
0
D
2
E5
1356810
24 7911 14 16
12 13 15
For ALL mode
1356810
24 7911 14 16
12 13 15
1+2
For setting the
transmit channels.
(C1–D
2)
For setting the
receive channels.
(C4–F5)
A-1 C
0
C6
The highest
key
CLP-115 MIDI Functions
ENGLISH
27
Program Change ON/OFF
Normally the CLP-115 will respond to MIDI program change numbers received from
an external keyboard or other MIDI device, causing the correspondingly-numbered
voice to be selected on the corresponding channel (the keyboard voice does not
change). The CLP-115 will normally also send a MIDI program change number when-
ever one of its voices is selected, causing the correspondingly-numbered voice or pro-
gram to be selected on the external MIDI device if the device is set up to receive and
respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and trans-
mission so that voices can be selected on the CLP-115 without affecting the external
MIDI device.
While holding down the A-1 and C
0 keys, press the C
6 key.
Control Change ON/OFF
Normally the CLP-115 will respond to MIDI control change data received from an
external MIDI device or keyboard, causing the voice on the corresponding channel to
be affected by pedal and other control” settings received from the controlling device
(the keyboard voice is not affected). The CLP-115 also transmits MIDI control change
information when the pedal or other appropriate controls are operated.
This function makes it possible to cancel control change data reception and transmis-
sion so that, for example, the CLP-115’s pedal and other controls can be operated with-
out affecting an external MIDI device.
While holding down the A-1 and C
0 keys, press the D6 key.
TIP
For information on program
change numbers for each of the
CLP-115’s voices, refer to
page 35 in the MIDI Data For-
mat section.
Procedure
A-1 C
0
C
6
The highest
key
TIP
For information on control
changes that can be used with
the CLP-115, refer to the MIDI
Data Format on page 34.
Procedure
A-1 C
0
D6
The highest
key
CLP-115 Troubleshooting
ENGLISH
28
Troubleshooting
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha Clavinova.
HPE-160 Stereo Headphones
High-performance lightweight dynamic headphones with extra-soft ear pads.
Problem Possible Cause and Solution
The CLP-115 does not turn on. The CLP-115 has not been plugged in properly. Securely insert the female plug into
the socket on the CLP-115, and the male plug into a proper AC outlet (page 11).
A click or pop is heard when the power is
turned on or off.
This is normal when electrical current is being applied to the instrument.
Noise from the speakers or headphones is
audible.
The noise may be due to interference caused by the use of a mobile phone in close
proximity to the CLP-115. Turn off the mobile phone, or move it further away from the
CLP-115.
The overall volume is low, or no sound is
heard.
The Master Volume is set too low. Set it to an appropriate level using the [MASTER
VOLUME] control.
Make sure a pair of headphones is not connected to the headphones jack.
Make sure that Local Control (page 26) is ON.
The damper pedal has no effect, or the sound
continuously sustains even when the damper
pedal is not pressed.
The pedal cord may not be properly connected. Make sure to securely insert the pedal
cord into the [PEDAL] jack (page 30).
CLP-115 Troubleshooting/Options
CLP-115 Keyboard Stand Assembly
ENGLISH
29
Keyboard Stand Assembly
CAUTION
Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accor-
dance with the sequence given below.
Assembly should be carried out by at least two persons.
Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.
Be sure to tighten up all screws upon completing assembly of each unit.
•To disassemble, reverse the assembly sequence given below.
Remove the following parts from the package.
1. Attach the side panels to the pedal box.
2. Attach the rear panel.
TIP
A headphone hanger is included in the CLP-115 package.
You can attach a headphone hanger on the CLP-115 to hang
the headphones (page 12).
Have a Phillips-head (+) screwdriver ready
Assembly Parts
6 × 20 mm long screws ×4 1
4 × 12 mm thin screws ×2
3
Cord holders × 2
6 × 16 mm short screws ×4
2
4
×
20 mm tapping screws
×
4
4
Pedal box
Rear panel
Main unit
Side
panel
(left)
Side
panel
(right)
Bundled pedal
cord inside
AC power cord
L
Side panel
(right)
Side panel
(left)
(1) Untie and straighten out the bun-
dled cord attached to the bottom
of the pedal box.
Don’t discard the twist tie, you’ll
need it later in step 5.
(3) Use the four
6×20 mm long
screws 1 to
attach the
pedal box.
(2) Align the sides of the
pedal box with the left and
right side panels.
R
L
(1) Secure the top of the
rear panel to the side
panel brackets using
two 4×12 mm thin
screws 3.
(2) Secure the bottom of the
rear panel to the pedal box
using four 4×20 mm tapping
screws 4.
Place the bottom edges
of the rear panel on the
feet’s protruding edges,
with the panel slightly
angled as shown in the
illustration.
CLP-115 Keyboard Stand Assembly
ENGLISH
30
3. Mount the main unit.
CAUTION
Fingers can become pinched between the main
unit and the rear or side panels, be extra careful
so as not to drop the main unit.
Do not hold the keyboard in any position other
than the position shown in the illustration.
4. Fix the main unit.
5. Connect the pedal cord.
6. Set the voltage selector and connect the
power cord.
Voltage Selector
Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some areas.
To set the selector for 110V, 127V, 220V or 240V main
voltages, use a “minus screwdriver to rotate the selector
dial so that the correct voltage for your region appears
next to the pointer on the panel. The voltage selector is
set at 240V when the unit is initially shipped. After the
proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug
adaptor may be also provided in some areas to match the
pin configuration of the AC wall outlets in your area.
R
Be sure to place your hands at least 10 cm
from either end of the main unit when positioning it.
At least
10 cm
(1) Center the main unit to pro-
duce equal clearance on
the left and right sides.
(2) Use 6x16 mm short screws
2 to secure the main unit
from the front.
PEDAL
(1) Insert the pedal cord
plug to the pedal con-
nector from the rear.
(2) Attach the cord holders to
the rear panel as shown,
then clip the cord into the
holders.
(3) Use a twist tie to
take up any slack
in the pedal cord.
240
127
110
220
CLP-115 Keyboard Stand Assembly
ENGLISH
31
WARNING
An improper voltage setting can cause serious
damage to the CLP-115 or result in improper
operation.
7. Set the adjuster.
After completing the assembly, please
check the following.
When moving the instrument after assembly, always
hold the bottom of the main unit.
CAUTION
Do not hold the key cover or top portion. Improper
handling can result in damage to the instrument or
personal injury.
Are there any parts left over?
Review the assembly procedure and correct any
errors.
Is the CLP-115 clear of doors and other movable
fixtures?
Move the CLP-115 to an appropriate location.
Does the CLP-115 make a rattling noise when
you shake it?
Tighten all screws.
Does the pedal box rattle or give way when you
step on the pedals?
Tu rn the adjuster so that it is set firmly against
the floor.
Are the pedal and power cords inserted securely
into the sockets?
Check the connection.
If the main unit creaks or is otherwise unsteady
when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.
Rotate the adjuster until it comes in firm contact with the
floor surface.
Top portion
Key cover
CLP-115 Index
ENGLISH
32
Index
Numerics
50 Greats for the Piano ...................................................16
50 Piano Preset Songs .....................................................16
A
Accessories.........................................................................8
Adjust
Reverb Depth.............................................................18
Tempo (metronome) ................................................21
Volume (50 Piano Preset Songs) ..............................16
Volume (Demo) ........................................................15
Volume (metronome)...............................................22
Assembly....................................................................29–31
C
Center Pedal ..............................................................14, 18
Combining Two Voices (Dual mode)............................19
Connecting a Personal Computer..................................24
D
Damper Pedal ............................................................14, 17
DEMO........................................................................14–16
Dual mode .......................................................................19
H
Headphone Hanger.........................................................12
Headphones.....................................................................12
K
Key Cover ........................................................................10
L
Left Pedal ...................................................................14, 18
M
MASTER VOLUME..................................................11, 14
METRONOME ...................................................14, 21–22
MIDI ................................................................................23
MIDI [IN] [OUT] [THRU]......................................14, 23
MIDI cables ...............................................................23, 25
MIDI connectors.......................................................23, 25
MIDI Data Format..........................................................34
MIDI Implementation Chart .........................................38
Music Rest .......................................................................10
P
PEDAL .......................................................................14, 30
PHONES.................................................................... 12, 14
POWER ..................................................................... 11, 14
PRECAUTIONS............................................................6–7
Preset songs 50 Piano Preset Songs........................... 16
R
Reverb..............................................................................18
Right Pedal ................................................................14, 17
S
Soft Pedal...................................................................14, 18
Song .................................................................................16
Sostenute Pedal .........................................................14, 18
Specifications................................................................... 39
Start/Stop playback
50 Piano Preset Songs ...............................................16
Demo Songs...............................................................15
T
Transporting .....................................................................8
Transposition ..................................................................20
Troubleshooting.............................................................. 28
V
VOICE .................................................................14, 17–19
CLP-115
33
Appendix/Anhang/
Annexe/Apéndice
This section introduces reference material.
In diesem Abschnitt finden Sie Referenzmaterial.
Cette section présente le matériel de référence.
En esta sección se incluye material de referencia.
MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI ................... 34
MIDI Implementation Chart / MIDI Implementierung stabelle /
Feuille d’implantation MIDI / Gráfica de implementación MIDI ................................................................... 38
Specifications / Technische Daten / Caractéristiques techniques / Especificaciones .......................................... 39
CLP-115 Appendix/Anhang/Annexe/Apéndice
34
MIDI Data Format / MIDI-Datenformat /
Format des données MIDI / Formato de datos MIDI
If you’re already very familiar with MIDI, or are using a
computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the CLP-115.
Falls Sie bereits mit MIDI vertraut sind oder einen
Computer zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
CLP-115 nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.
Si vous êtes très familier avec l’interface MIDI ou si vous
utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le CLP-115.
SI usted está ya familiarizado con MIDI, o si emplea una
computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos
proporcionados en esta sección le ayudarán a controlar la
CLP-115.
1. NOTE ON/OFF
Data format: [9nH] -> [kk] -> [vv]
9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /
Receive: 00H ~ 7FH = C-2 ~ G8)*
vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)
Data format: [8nH] -> [kk] -> [vv] (reception only)
8nH = Note OFF event (n = channel number)
kk = Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity
* If received value exceeds the supported range for the
selected voice, the note is adjusted by the necessary num-
ber of octaves.
2. CONTROL CHANGE
Data format: [BnH] -> [cc] -> [vv]
BnH = Control change (n = channel number)
cc = Control number
vv = Data Range
(1) Bank Select
ccH Parameter Data Range (vvH)
00H Bank Select MSB 00H:Normal
20H Bank Select LSB 00H...7FH
Bank selection processing does not occur until receipt of
next Program Change message.
(2) Main Volume (reception only)
ccH Parameter Data Range (vvH)
07H Volume MSB 00H...7FH
(3) Expression (reception only)
ccH Parameter Data Range (vvH)
0BH Expression MSB 00H...7FH
(4) Damper
ccH Parameter Data Range (vvH)
40H Damper MSB 00H...7FH
(5) Sostenuto
ccH Parameter Data Range (vvH)
42H Sostenuto 00H-3FH:off, 40H-7FH:on
(6) Soft Pedal
ccH Parameter Data Range (vvH)
43H Soft Pedal 00H-3FH:off, 40H-7FH:on
(7) Effect1 Depth (Reverb Send Level)
ccH Parameter Data Range (vvH)
5BH Effect1 Depth 00H...7FH
Adjusts the reverb send level.
(8) Effect4 Depth (Variation Effect Send Level)
(reception only)
ccH Parameter Data Range (vvH)
5EH Effect4 Depth 00H...7FH
3. MODE MESSAGES
Data format: [BnH] -> [cc] -> [vv]
BnH = Control event (n = channel number)
cc = Control number
vv = Data Range
(1) All Sound Off
ccH Parameter Data Range (vvH)
78H All Sound Off 00H
(2) Reset All Controllers
ccH Parameter Data Range (vvH)
79H Reset All Controllers 00H
Resets controllers as follows.
Controller Value
Expression 127 (max)
Damper Pedal 0 (off)
Sostenuto 0 (off)
Soft Pedal 0 (off)
(3) Local Control (reception only)
ccH Parameter Data Range (vvH)
7AH Local Control 00H (off), 7FH (on)
(4) All Notes Off
ccH Parameter Data Range (vvH)
7BH All Notes Off 00H
Switches OFF all the notes that are currently ON on the spec-
ified channel. Any notes being held by the damper or soste-
nuto pedal will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccH Parameter Data Range (vvH)
7CH Omni Off 00H
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccH Parameter Data Range (vvH)
7DH Omni On 00H
Same processing as for All Notes Off.
(7) Mono (reception only)
ccH Parameter Data Range (vvH)
7EH Mono 00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccH Parameter Data Range (vvH)
7FH Poly 00H
Same processing as for All Sound Off.
When control change reception is turned OFF, control change
data will not be transmitted or received except for Bank Select
and Mode messages.
Local on/off, OMNI on/off are not transmitted. (The appropriate
note off number is supplied with “All Note Off transmission).
When a voice bank MSB/LSB is received, the number is
stored in the internal buffer regardless of the received order,
then the stored value is used to select the appropriate voice
when a program change message is received.
The Multi-timbre and Poly modes are always active. No
change occurs when OMNI ON, OMNI OFF, MONO, or POLY
mode messages are received.
CLP-115 Appendix/Anhang/Annexe/Apéndice
35
4. PROGRAM CHANGE
Data format: [CnH] -> [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
P. C .#=Program Change number
When you specify a program change as a number in the
range of 0-127, specify a number that is one less than the
program number listed above. For example, to specify pro-
gram number 1, you would specify program change 0.
When program change reception is turned OFF, no program
change data is transmitted or received. Also, Bank MSB/LSB
is not transmitted or received.
5. SYSTEM REALTIME MESSAGES
[rrH]
F8H: Timing clock
FAH: Start
FCH: Stop
FEH: Active sensing
Caution: If an error occurs during MIDI reception, the Damper,
Sostenuto, and Soft effects for all channels are turned off and
an All Note Off occurs.
6. SYSTEM EXCLUSIVE MESSAGES
(Universal System Exclusive)
(1) Universal Realtime Message
Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->
[llH] -> [mmH] -> [F7H]
MIDI Master Volume
Simultaneously changes the volume of all channels.
When a MIDI master volume message is received, the volume
only has affect on the MIDI receive channel, not the panel
master volume.
F0H = Exclusive status
7FH = Universal Realtime
7FH = ID of target device
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH =
Volume MSB
F7H = End of Exclusive
or
F0H = Exclusive status
7FH = Universal Realtime
XnH = When n is received n=0~F, whichever is received.
X = don’t care
04H = Sub-ID #1=Device Control Message
01H = Sub-ID #2=Master Volume
llH = Volume LSB
mmH =
Volume MSB
F7H = End of Exclusive
(2) Universal Non-Realtime Message (GM On)
General MIDI Mode On
Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->
[F7H]
F0H = Exclusive status
7EH = Universal Non-Realtime
7FH = ID of target device
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
or
F0H = Exclusive status
7EH = Universal Non-Realtime
XnH = When received, n=0~F.
X = don’t care
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
When the General MIDI mode ON message is received, the
MIDI system will be reset to its default settings.
This message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
Voice Name MSB LSB
P.C.#
Grand Piano 1 0 122 1
Grand Piano 2 0 112 1
E.Piano 1 0 122 6
E.Piano 2 0 122 5
Harpsichord 1 0 122 7
Harpsichord 2 0 123 7
Vibraphone 0 122 12
Church Organ 1 0 123 20
Church Organ 2 0 122 20
Strings 0 122 49
Data Transmission Reception
F8H
Transmitted every
96 clocks
Received as 96-clock tempo timing
when MIDI clock is set to External.
FAH Song start
Song start
Not received when the MIDI clock is
set to Internal.
FCH Song stop
Song stop
Not received when the MIDI clock is
set to Internal.
FEH
Transmitted every
200 milliseconds
If a signal is not received via MIDI for
more than 400 milliseconds, the
same processing will take place for
All Sound Off, All Notes Off and Reset
All Controllers as when those signals
are received.
CLP-115 Appendix/Anhang/Annexe/Apéndice
36
7. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->
[mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI sys-
tem will be reset to its default settings.
The message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
(2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->
[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->
[ccH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
Receipt of the XG SYSTEM ON message causes reinitializa-
tion of relevant parameters and Control Change values. Allow
sufficient time for processing to execute (about 50 msec)
before sending the CLP-115 another message.
XG Native Parameter Change message may contain two or
four bytes of parameter data (depending on the parameter
size).
•For information about the Address and Byte Count values,
refer to Table 1 below. Note that the table’s Total Size value
gives the size of a bulk block. Only the top address of the
block (00H, 00H, 00H) is valid as a bulk data address.
8. SYSTEM EXCLUSIVE MESSAGES
(Clavinova MIDI Format)
Data format:
[F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
01H = Product ID (C
LP
common)
or
7F= Extended Product ID
24H = Product ID
nnH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
06H Bulk Data (the bulk data follows 06H)
F7H = End of Exclusive
* When nn=02H or 03H, Clavinova common ID (01H) is
rec-ognized as well as 75H.
9.
SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] ->
[0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
7FH = Extended Product ID
24H = Product ID
11H = Special control
0nH = Control MIDI change (n=channel number)
cc = Control number
vv = Value
F7H = End of Exclusive
Control Channel ccH vvH
Metronome Always 00H 1BH 00H : off
01H :
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
7FH : No accent
Channel Detune
ch: 00H-0FH 43H (Sets the Detune value
for each channel)
00H-7FH
Voice Reserve
ch: 00H-0FH 45H 00H : Reserve off
7FH : on*
*
When Volume, Expression is received for Reserve On, they
will be effective from the next Key On. Reserve Off is normal.
10. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
[F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]
-> [00H] -> [mmH] -> [
ll
H] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0~F.
When transmitted, n=0.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
ll
H = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive
CLP-115
Appendix/Anhang/Annexe/Apéndice
37
<Table 1>
MIDI Parameter Change table (SYSTEM)
Address (H) Size (H) Data (H) Parameter Description Default value (H)
00 00 00 4 020C - 05F4(*1) MASTER TUNE -50 - +50[cent] 00 04 00 00
01 1st bit 3 - 0
bit 15 - 12 400
02 2nd bit 3 - 0
bit 11 - 8
03 3rd bit 3 - 0
bit 7 - 4
4th bit 3 - 0
bit 3 - 0
04 1 00 - 7F MASTER VOLUME 0 - 127 7F
05 1
06 1 34 - 4C(*2) TRANSPOSE -12 - +12[semitones] 40
7E 00 XG SYSTEM ON 00=XG system ON
7F 00 RESET ALL PARAMETERS 00=ON (receive only)
TOTAL SIZE 07
*1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents.
*2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12.
<Table 2>
MIDI Parameter Change table (EFFECT 1)
Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers.
Address (H) Size (H) Data (H) Parameter Description Default value (H)
02 01 00 2 00-7F REVERB TYPE MSB Refer to Effect MIDI Map 01(=HALL1)
00-7F REVERB TYPE LSB 00 : basic type 00
02 01 40 2 00-7F VARIATION TYPE MSB Refer to Effect MIDI Map 00(=Effect off)
00-7F VARIATION TYPE LSB 00 : basic type 00
• “VARIATION” refers to the EFFECT on the panel.
<Table 3>
MIDI Parameter Change table (MULTI PART)
Address (H) Size (H) Data (H) Parameter Description Default value (H)
08 nn 11 1 00 - 7F DRY LEVEL 0 - 127 7F
nn = Part Number
• Effect MIDI Map
REVERB
MSB LSB
ROOM 02H 10H
HALL 1 01H 10H
HALL 2 01H 11H
STAGE 03H 10H
EFFECT
MSB LSB
CHORUS 42H 10H
PHASER 48H 10H
TREMOLO 46H 10H
DELAY 05H 10H
CLP-115
Appendix/Anhang/Annexe/Apéndice
38
MIDI Implementation Chart
YAMAHA [Clavinova] Date: 7 Mar, 2003
Model: CLP-115 MIDI Implementation Chart Version: 1.0
Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO O : Yes
Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO X : No
Function Transmitted Recognized Remarks
Basic Default
Channel Changed
1
1 - 16
1
1 - 16
Default
Mode Messages
Altered
3
X
*****************
1 *1
X
X
Poly Mode only
Note
Number : True voice
9 - 120
*****************
0 - 127
0 - 127
Velocity Note ON
Note OFF
O 9nH, v=1 - 127
O 9nH, v=0
O 9nH, v=1 - 127
O 9nH, v=0 or 8nH
After Key’s
Touch Ch’s
X
X
X
X
Pitch Bend X X
Control Change 0, 32
7
11
64
66
67
91
94
O
O
X
O
O
O
O
X
O
O
O
O
O
O
O
O
Bank Select
Volume
Expression
Damper
Sostenuto
Soft pedal
Reverb Depth
Effect Depth
Program
Change : True #
O
*****************
O
System Exclusive O O
: Song Pos.
Common : Song Sel.
: Tune
X
X
X
X
X
X
System : Clock
Real Time : Commands
O
O
O
O
: All Sound Off
Aux: Reset All Cntrls
: Local ON/OFF
Messages : All Notes OFF
: Active Sense
: Reset
O
O
X
O
O
X
O (120, 126, 127)
O (121)
O (122)
O (123 - 125)
O
X
Notes : *1 = Recieve Mode is always multi timbre and Poly mode.
CLP-115
Appendix/Anhang/Annexe/Apéndice
39
Specifications / Technische Daten /
Caractéristiques techniques / Especificaciones
*Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change
or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the
same in every locale, please check with your Yamaha dealer.
*Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich
das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da
die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit
Ihrem Yamaha-Händler in Verbindung.
*Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se
réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que
les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur
Yamaha le plus proche.
* Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha
Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin pre-
vio aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información
a su distribuidor Yamaha.
Item
CLP-115
Keyboard 88 keys (A-1 - C7)
Sound Source AWM Stereo Sampling
Polyphony 32 Notes Max.
Voice Selection 10
Effect Reverb
Volume Master Volume
Controls Dual, Metoronome, Transpose
Pedal Damper, Sostenuto, Soft
Demo Songs 10 voice Demo Songs, 50 preset Songs
Jacks/Connectors MIDI (IN/OUT/THRU), PHONES
×
2
Main Amplifiers 20W
×
2
Speakers Oval (12cm
×
6cm)
×
2
Dimensions (W
×
D
×
H)
(with music rest)
1345mm
×
426mm
×
815mm [52-15/16"
×
16-3/4"
×
32-1/16"]
(1345mm
×
426mm
×
968mm) [53-15/16"
×
16-3/4"
×
38-1/8"]
Weight 41kg (90lbs., 6oz)
Accessories
Owner’s Manual, “50 greats for the Piano” (Music Book), Bench (included or optional depend-
ing on locale), Quick Operation Guide
CLP-115
Appendix/Anhang/Annexe/Apéndice
40
MEMO
CLP-115
Appendix/Anhang/Annexe/Apéndice
41
MEMO
CLP-115
Appendix/Anhang/Annexe/Apéndice
42
MEMO
IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING
- When using any electrical or electronic product,
basic precautions should always be followed. These precautions
include, but are not limited to, the following:
1.
Read all Safety Instructions, Installation Instructions, Spe-
cial Message Section items, and any Assembly Instructions
found in this manual BEFORE making any connections, includ-
ing connection to the main supply.
2.
Main Power Supply Verification: Yamaha products are
manufactured specifically for the supply voltage in the area
where they are to be sold. If you should move, or if any doubt
exists about the supply voltage in your area, please contact your
dealer for supply voltage verification and (if applicable) instruc-
tions. The required supply voltage is printed on the name plate.
For name plate location, please refer to the graphic found in the
Special Message Section of this manual.
3.
This product may be equipped with a polarized plug (one
blade wider than the other). If you are unable to insert the plug
into the outlet, turn the plug over and try again. If the problem
persists, contact an electrician to have the obsolete outlet
replaced. Do NOT defeat the safety purpose of the plug.
4.
Some electronic products utilize external power supplies
or adapters. Do NOT connect this type of product to any power
supply or adapter other than one described in the owners manual,
on the name plate, or specifically recommended by Yamaha.
5.
WARNING:
Do not place this product or any other
objects on the power cord or place it in a position where anyone
could walk on, trip over, or roll anything over power or connect-
ing cords of any kind. The use of an extension cord is not recom-
mended! If you must use an extension cord, the minimum wire
size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller the
AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
6.
Ventilation: Electronic products, unless specifically
designed for enclosed installations, should be placed in locations
that do not interfere with proper ventilation. If instructions for
enclosed installations are not provided, it must be assumed that
unobstructed ventilation is required.
7.
Temperature considerations: Electronic products should
be installed in locations that do not significantly contribute to
their operating temperature. Placement of this product close to
heat sources such as; radiators, heat registers and other devices
that produce heat should be avoided.
8.
This product was NOT designed for use in wet/damp loca-
tions and should not be used near water or exposed to rain.
Examples of wet/damp locations are; near a swimming pool, spa,
tub, sink, or wet basement.
9.
This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended by the
manufacturer. If a cart, rack, or stand is used, please observe all
safety markings and instructions that accompany the accessory
product.
10.
The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be left unused for
extended periods of time. Cords should also be disconnected
when there is a high probability of lightning and/or electrical
storm activity.
11.
Care should be taken that objects do not fall and liquids are
not spilled into the enclosure through any openings that may exist.
12.
Electrical/electronic products should be serviced by a
qualified service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been
spilled into the enclosure through openings; or
c. The product has been exposed to rain: or
d. The product dose not operate, exhibits a marked change
in performance; or
e. The product has been dropped, or the enclosure of the
product has been damaged.
13.
Do not attempt to service this product beyond that
described in the user-maintenance instructions. All other servic-
ing should be referred to qualified service personnel.
14.
This product, either alone or in combination with an
amplifier and headphones or speaker/s, may be capable of pro-
ducing sound levels that could cause permanent hearing loss. DO
NOT operate for a long period of time at a high volume level or
at a level that is uncomfortable. If you experience any hearing
loss or ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
15.
Some Yamaha products may have benches and/or accessory
mounting fixtures that are either supplied as a part of the product
or as optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches are
stable and any optional fixtures (where applicable) are well
secured BEFORE using. Benches supplied by Yamaha are
designed for seating only. No other uses are recommended.
PLEASE KEEP THIS MANUAL
92-469-2
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
(2 wires)
This applies only to products distributed by Yamaha-Kemble Music
(U.K.) Ltd.
(polarity)
This applies only to products distributed by Yamaha Canada Music
Ltd.
Ceci ne s’applique qu’aux produits distribués par Yamaha Canada
Musique Ltée.
FCC INFORMATION (U.S.A.)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instruc-
tions contained in this manual, meets FCC require-
ments. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2.
IMPORTANT:
When connecting this product to acces-
sories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions. Fail-
ure to follow instructions could void your FCC authoriza-
tion to use this product in the USA.
3.
NOTE:
This product has been tested and found to com-
ply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices. This equipment generates/
uses radio frequencies and, if not installed and used
according to the instructions found in the users manual,
may cause interference harmful to the operation of
other electronic devices. Compliance with FCC regula-
tions does not guarantee that interference will not occur
in all installations. If this product is found to be the
source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate
the problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfac-
tory results, please contact the local retailer authorized
to distribute this type of product. If you can not locate
the appropriate retailer, please contact Yamaha Corpo-
ration of America, Electronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this appa-
ratus may not correspond with the coloured makings iden-
tifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK.
The wire which is coloured BROWN must be connected to
the terminal which is marked with the letter L or coloured
RED.
Making sure that neither core is connected to the earth ter-
minal of the three pin plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou
au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana
o el distribuidor autorizado que se lista debajo.
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
MEXICO
Yamaha de Mexico S.A. De C.V.,
Departamento de ventas
Javier Rojo Gomez No.1149, Col. Gpe Del
Moral, Deleg. Iztapalapa, 09300 Mexico, D.F.
Tel: 686-00-33
BRAZIL
Yamaha Musical do Brasil LTDA.
Av. Rebouças 2636, São Paulo, Brasil
Tel: 011-853-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Viamonte 1145 Piso2-B 1053,
Buenos Aires, Argentina
Tel: 1-4371-7021
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
THE UNITED KINGDOM
Yamaha-Kemble Music (U.K.) Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
IRELAND
Danfay Ltd.
61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin
Tel: 01-2859177
GERMANY
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH,
Branch Switzerland
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Central Europe GmbH,
Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
THE NETHERLANDS
Yamaha Music Central Europe,
Branch Nederland
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH,
Branch Belgium
Rue de Geneve (Genevastraat) 10, 1140 - Brussels,
Belgium
Tel: 02-726 6032
FRANCE
Yamaha Musique France, S.A.
Division Professionnelle
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Combo Division
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha-Hazen Música, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1
Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 8B
DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1
N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120
IS-128 Reykjavik, Iceland
Tel: 525 5000
OTHER EUROPEAN COUNTRIES
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2312
TURKEY/CYPRUS
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LB21-128 Jebel Ali Freezone
P.O.Box 17328, Dubai, U.A.E.
Tel: +971-4-881-5868
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong,
Youngdungpo-ku, Seoul, Korea
Tel: 02-3770-0661
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-703-0900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
11 Ubi Road #06-00, Meiban Industrial Building,
Singapore
Tel: 65-747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
121/60-61 RS Tower 17th Floor,
Ratchadaphisek RD., Dindaeng,
Bangkok 10320, Thailand
Tel: 02-641-2951
THE PEOPLE’S REPUBLIC OF CHINA
AND OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2317
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Houses of N.Z. Ltd.
146/148 Captain Springs Road, Te Papapa,
Auckland, New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-2312
NORTH AMERICA
CENTRAL & SOUTH AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
[CL] 29
Clavinova Web site (English only)
http://www.yamahaclavinova.com/
Yamaha Manual Library
http://www2.yamaha.co.jp/manual/english/
DIC 244
Owner's Manual
Bedienungsanleitung
Mode d'emploi
Manual de instrucciones
Before using the Clavinova, be sure to read PRECAUTIONS on pages 6 -7.
Achten Sie darauf, vor Einsatz des Clavinova die VORSICHTSMASSNAHMEN auf Seite 6 -7
durchzulesen.
Avant d'utiliser le Clavinova, lire attentivement la section
« PRECAUTIONS D'USAGE» aux
pages 6- 7.
Antes de utilizar el Clavinova, lea las
PRECAUCIONES que debe tener en cuenta en las páginas
6- 7.
IMPORTANT
Check your power supply
Make sure that your local AC mains voltage matches the voltage specified on the name plate
on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of
the main keyboard unit near the power cord. Make sure that the voltage selector is set for the
voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To
change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage
appears next to the pointer on the panel.
WICHTIG
Überprüfung der Stromversorgung
Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den
Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In
bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite
neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf
die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V
voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher,
bis der Zeiger auf den korrekten Spannungswert weist.
IMPORTANT
Contrôler la source d'alimentation
rifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans
certaines régions, l'instrument peut être équipé d'un sélecteur de tension situé sur le panneau
inférieur du clavier à proximité du cordon d'alimentation.
Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le
lecteur de tension est réglé sur 240 V au départ d'usine. Pour modifier ce réglage, utilisez un
tournevis à lame plate pour tourner le sélecteur afin de mettre l'indication correspondant à la
tension de votre région vis à vis du repère triangulaire situé sur le panneau.
IMPORTANTE
Verifique la alimentación de corriente
Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión
especificada en la placa de características del panel inferior. En algunas zonas puede haberse
incorporado un selector de tensión en el panel inferior de la unidad del teclado principal, cerca del
cable de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su
área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el
ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la
tensión correcta al lado del indicador del panel.
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
C
2003 Yamaha Corporation
WB29560 30?AP???.?-01A0 Printed in Indonesia
CLP-115
CLP-115

Transcripción de documentos

CLP-115 CLP-115 Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Before using the Clavinova, be sure to read “PRECAUTIONS„ on pages 6 -7. Achten Sie darauf, vor Einsatz des Clavinova die “VORSICHTSMASSNAHMEN„ auf Seite 6 -7 durchzulesen. Avant d'utiliser le Clavinova, lire attentivement la section «PRECAUTIONS D'USAGE» aux pages 6-7. Antes de utilizar el Clavinova, lea las “PRECAUCIONES„ que debe tener en cuenta en las páginas 6-7. IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. WICHTIG Überprüfung der Stromversorgung Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist. IMPORTANT Clavinova Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation C 2003 Yamaha Corporation WB29560 30?AP???.?-01A0 Printed in Indonesia Contrôler la source d'alimentation Vérifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans certaines régions, l'instrument peut être équipé d'un sélecteur de tension situé sur le panneau inférieur du clavier à proximité du cordon d'alimentation. Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le sélecteur de tension est réglé sur 240 V au départ d'usine. Pour modifier ce réglage, utilisez un tournevis à lame plate pour tourner le sélecteur afin de mettre l'indication correspondant à la tension de votre région vis à vis du repère triangulaire situé sur le panneau. IMPORTANTE Verifique la alimentación de corriente Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión especificada en la placa de características del panel inferior. En algunas zonas puede haberse incorporado un selector de tensión en el panel inferior de la unidad del teclado principal, cerca del cable de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la tensión correcta al lado del indicador del panel. DIC 244 Introduction SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. See bottom of Keyboard enclosure for graphic symbol markings. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. Battery Notice: This product MAY contain a small non- rechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. Warning: Do not attempt to recharge, disassemble, or incinerate this type of battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by applicable laws. Note: In some areas, the servicer is required by law to return the defective parts. However, you do have the option of having the servicer dispose of these parts for you. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. NOTICE: Service charges incurred due to lack of knowl- edge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. NAME PLATE LOCATION: The graphic below indi- cates the location of the name plate. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. IMPORTANT NOTICE: All Yamaha electronic products are tested and approved by an independent safety testing laboratory in order that you may be sure that when it is properly installed and used in its normal and customary manner, all foreseeable risks have been eliminated. DO NOT modify this unit or commission others to do so unless specifically authorized by Yamaha. Product performance and/or safety standards may be diminished. Claims filed under the expressed warranty may be denied if the unit is/has been modified. Implied warranties may also be affected. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: 92-469 1 (bottom) Model Serial No. Purchase Date Thank you for purchasing the Yamaha Clavinova! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the CLP-115. We also recommend that you keep this manual in a safe and handy place for future reference. About this Owner’s Manual This manual consists of three main sections: “Introduction,” “Reference” and “Appendix.” Reference (page 13): This section explains how to make detailed settings for the CLP-115’s various functions. Appendix (page 33): This section introduces reference material. ENGLISH Introduction (page 2): Please read this section first. * The model CLP-115 will be referred to as the CLP/Clavinova in this Owner’s Manual. * The illustrations of the controls in this owner’s manual are for instructional purposes only and actual appearance of the controls may be somewhat different on your instrument. COPYRIGHT NOTICE This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, MIDI files and WAVE data. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES. Trademarks: • • • Apple and Macintosh are trademarks of Apple Computer, Inc. Windows is a registered trademark of Microsoft® Corporation. All other trademarks are the property of their respective holders. “The Clavinova-Computer Connection,” is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for a specific model). The document is available as a PDF file (in English) at the following Internet address: Clavinova Web site (English only): http://www.yamahaclavinova.com/ Yamaha Manual Library: http://www2.yamaha.co.jp/manual/english/ CLP-115 About this Owner’s Manual 3 Table of Contents Introduction Application Index........................................ 5 PRECAUTIONS............................................. 6 Accessories .................................................. 8 Maintenance ............................................... 8 ENGLISH Features....................................................... 9 Before Using the CLP-115......................... 10 Key Cover ...........................................................10 Music Rest ..........................................................10 Turning the Power On.......................................11 Setting the Volume.............................................11 Using Headphones .............................................12 Reference Panel Controls and Terminals................... 14 Listening to the Demo Songs ................... 15 Listening to 50 Piano Preset Songs .......... 16 Selecting & Playing Voices........................ 17 Selecting Voices ..................................................17 Using the Pedals .................................................17 Adding Variations to the Sound – Reverb ........18 Combining Two Voices (Dual mode)...............19 Transposition .....................................................20 Fine-tuning the Pitch .........................................20 Using the Metronome........................................21 About MIDI ............................................... 23 Connecting a Personal Computer ............ 24 MIDI Functions.......................................... 26 MIDI Transmit/Receive Channel Selection......26 Local Control ON/OFF......................................26 Program Change ON/OFF.................................27 Control Change ON/OFF ..................................27 Troubleshooting ....................................... 28 Options...................................................... 28 Keyboard Stand Assembly ........................ 29 Index ......................................................... 32 4 CLP-115 Table of Contents Appendix MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI .......................... 34 MIDI Implementation Chart ..................... 38 Specifications / Technische Daten / Caractéristiques techniques / Especificaciones ...................................... 39 Application Index Use this index to find reference pages that may be helpful for your particular application and situation. Listening Listening to demo songs with different voices...................................................... “Listening to the Demo Songs” on page 15 Listening to songs from “50 Greats for the Piano” ...................................... “Listening to 50 Piano Preset Songs” on page 16 Using three pedals ....................................................................................................................... “Using the Pedals” on page 17 Playing an accompaniment that matches pitch ............................................................................. “Transposition” on page 20 Fine-tuning the pitch of the entire instrument when you play the CLP-115 along with other instruments or CD music.......................................................................“Fine-tuning the Pitch” on page 20 Changing voices ENGLISH Playing Viewing the list of voices............................................................................................................. “Selecting Voices” on page 17 Simulating a concert hall .................................................................... “Adding Variations to the Sound – Reverb” on page 18 Combining two voices............................................................................... “Combining Two Voices (Dual mode)” on page 19 Practicing Practicing with an accurate and steady tempo .................................................................“Using the Metronome” on page 21 Connecting the CLP-115 to other devices What is MIDI? ....................................................................................................................................“About MIDI” on page 23 Connecting the computer ...............................................................................“Connecting a Personal Computer” on page 24 Assembling Assembling and disassembling the CLP-115 ......................................................“Keyboard Stand Assembly” on pages 29–31 CLP-115 Application Index 5 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING ENGLISH Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord ● ● ● ● Water warning Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Use only the supplied power cord/plug. Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it. ● ● Fire warning ● Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. If you notice any abnormality Do not open ● Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. Never insert or remove an electric plug with wet hands. Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. ● If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel. CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/Power cord ● ● ● Location When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. ● ● ● ● Assembly ● ● Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. (1)B-7 6 CLP-115 PRECAUTIONS 1/2 Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components. Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. Do not place the instrument in an unstable position where it might accidentally fall over. Before moving the instrument, remove all connected cables. Do not place the instrument against a wall (allow at least 3 cm/ one-inch from the wall), since this can cause inadequate air circulation, and possibly result in the instrument overheating. Connections Handling caution Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. ● ● Maintenance ● When cleaning the instrument, use a soft, dry or slightly damp cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths. ● ● ● Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in any gaps on the key cover or instrument. Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. Do not operate the instrument for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. ENGLISH ● Using the bench (If included) ● ● ● ● Do not place the bench in an unstable position where it might accidentally fall over. Do not play carelessly with or stand on the bench. Using it as a tool or step-ladder or for any other purpose might result in accident or injury. Only one person should sit on the bench at a time, in order to prevent the possibility of accident or injury. If the bench screws become loose due to extensive long-term use, tighten them periodically using the included tool. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. (1)B-7 2/2 CLP-115 PRECAUTIONS 7 Accessories • “50 Greats for the Piano” (Music Book) • Owner’s Manual This manual contains complete instructions for operating your CLP-115. • Quick Operation Guide ENGLISH • Bench A bench may be included or optional, depending on your locale. Maintenance Clean the instrument using a dry or slightly damp soft cloth (wring well). CAUTION Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber products on the instrument. Otherwise, the panel or keys may become discolored or degraded. CAUTION Before using the CLP-115, be sure to read “PRECAUTIONS” on pages 6 – 7. Tuning Unlike an acoustic piano, the CLP-115 does not need to be tuned. It always stays perfectly in tune. Transporting If you move to another location, you can transport the CLP-115 along with your other belongings. You can move the unit as it is (assembled) or you can disassemble the unit before moving. Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock. 8 CLP-115 Accessories / Maintenance Features The Yamaha Clavinova CLP-115 digital piano offers unmatched sonic realism and natural grand-piano type playability as well as Yamaha’s original “AWM Stereo Sampling” tone-generation technology for rich, musical voices, and a special “Graded Hammer” keyboard that provides graded key weight and response throughout the keyboard range. The Grand Piano 1 and 2 voices feature samples painstakingly recorded from a full concert grand piano. The E. Piano 1 voice features a single velocity-switched sample (Dynamic Sampling) and E. Piano 2 voice features two velocity-switched sample. The CLP-115 sounds much closer to a true acoustic piano. MIDI [IN/OUT/THRU] A set of standard stereo headphones can be plugged in here for private practice (page 12). Connect a MIDI device to this connector to use various MIDI functions (pages 24–25). (About MIDI—page 23) ENGLISH [PHONES] MIDI THRU OUT IN PHONES MASTER VOLUME MIN MAX POWER DEMO METRONOME VOICE [PEDAL] PEDAL MASTER VOLUME Connect the pedal cord here to use the CLP-115’s pedals (page 30). [MASTER VOLUME] Adjust the volume level using this control (page 11). MIN MAX [DEMO] DEMO METRONOME Playback of a demo song and 50 preset songs is available (page 15). [METRONOME] Control the metronome functions (page 21). VOICE [VOICE] Select voices from 10 internal sounds, including Grand Piano 1 and 2 (page 17). You can also combine two voices simultaneously (page 19), select various reverb effects (page 18), etc. CLP-115 Features 9 Before Using the CLP-115 Key Cover To open the key cover: Lift the cover slightly, then push and slide it open. To close the key cover: ENGLISH Slide the cover toward you and gently lower the cover over the keys. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. CAUTION Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children’s) between the cover and main unit. CAUTION Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric shock, short circuit, fire or other serious damage to the instrument. Music Rest To raise the music rest: 1. Pull the music rest up and toward yourself as far as it will go. 2. Flip down the two metal supports at the left and right on the rear of the music rest. 3. Lower the music rest so that it rests on the metal supports. To lower the music rest: 1. Pull the music rest toward yourself as far as it will go. 2. Raise the two metal supports (at the rear of the music rest). 3. Gently lower the music rest backward until it is all the way down. CAUTION Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the music rest until it is all the way down. 10 CLP-115 Before Using the CLP-115 Turning the Power On 1. Connect the power cord. Insert the plugs at the ends of the cord: one into the AC INLET on the CLP-115, and the other into a standard AC outlet. In some areas, a plug adaptor may be provided to match the pin configuration of AC wall outlets in your area. 1 2 (The shape of the plug differs depending on locale.) 2. Turn the power on. Press the [POWER] button. • The power indicator located below the left end of the keyboard lights up. ENGLISH (bottom surface) [POWER] Power indicator MASTRE VOLUME MIN MAX DEMO METRONOME VOICE When you’re ready to turn off the power, press the [POWER] button again. • The power indicator turns off. TIP Power indicator If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still on. Setting the Volume When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. MASTER VOLUME The level decreases. The level increases. MIN MAX CAUTION Do not use the CLP-115 at a high volume level for a long period of time, or your hearing may be damaged. TERMINOLOGY TIP MASTER VOLUME: The volume level of the entire keyboard sound You can also adjust the [PHONES] output level using the [MASTER VOLUME] control. CLP-115 Before Using the CLP-115 11 Using Headphones Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided. You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) MASTRE VOLUME MIN MAX DEMO METRONOME VOICE ENGLISH bottom surface PHONES standard stereo phone plug Using the Headphone Hanger A headphone hanger is included in the CLP-115 package so that you can hang the headphones on the CLP-115. Install the headphone hanger using the included two screws (4 × 10mm) as shown in the figure. 12 CLP-115 Before Using the CLP-115 NE O PH Do not hang anything other than the headphones on the hanger. Otherwise, the CLP-115 or the hanger may be damaged. S CAUTION ENGLISH Reference This section explains how to make detailed settings for the CLP-115’s various functions. Panel Controls and Terminals ................................. 14 Listening to the Demo Songs................................... 15 Listening to 50 Piano Preset Songs.......................... 16 Selecting & Playing Voices ....................................... 17 Selecting Voices ........................................................... 17 Using the Pedals .......................................................... 17 Adding Variations to the Sound – Reverb.................. 18 Combining Two Voices (Dual mode)......................... 19 Transposition............................................................... 20 Fine-tuning the Pitch .................................................. 20 Using the Metronome ................................................. 21 About MIDI.............................................................. 23 Connecting a Personal Computer ........................... 24 MIDI Functions........................................................ 26 MIDI Transmit/Receive Channel Selection ............... 26 Local Control ON/OFF............................................... 26 Program Change ON/OFF ......................................... 27 Control Change ON/OFF ........................................... 27 Troubleshooting ....................................................... 28 Options ..................................................................... 28 Keyboard Stand Assembly........................................ 29 Index ......................................................................... 32 CLP-115 13 Panel Controls and Terminals Top panel 7 MIDI THRU OUT IN 6 8 ENGLISH PHONES PEDAL MASTER VOLUME MIN MAX POWER DEMO METRONOME 1 VOICE A-1 B-1 C0 D0 E0 F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5 B5 C6 D6 E6 F6 G6 A6 B6 C7 MASTER VOLUME 2 MIN MAX 9 DEMO 3 0 A METRONOME 4 VOICE 5 1 2 3 4 5 6 7 14 [POWER] ....................................... P11 [MASTER VOLUME] ....................... P11 [DEMO] ...................................P15–16 [METRONOME]........................P21–22 [VOICE]....................................P17–19 [PHONES] ..................................... P12 MIDI [IN] [OUT] [THRU]................ P23 CLP-115 Panel Controls and Terminals 8 9 0 A [PEDAL]......................................... P30 Soft (Left) Pedal ............................ P18 Sostenute (Center) Pedal............... P18 Damper (Right) Pedal ................... P17 Listening to the Demo Songs Demo songs are provided that effectively demonstrate each of the CLP-115’s voices. Procedure 1. Turn on the power. 2. Engage Demo mode. Press the [DEMO] button to engage Demo mode. The [DEMO] button indicator will light. 3. Play a Voice demo. While holding down the [DEMO] button, press one of the C1–A1 keys to select and start the corresponding demo song. Starting with the selected tune, the demo songs will play in sequence until stopped. NOTE Refer to the voice list on page 17 for more information on the characteristics of each preset voice. TERMINOLOGY Mode: A mode is a condition or status under which you can execute a certain function. In Demo mode, you can play back demo songs. ENGLISH (In case the power is not turned ON) Press the [POWER] button. When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. NOTE You cannot adjust the tempo of demo songs. DEMO The lowest key C1 A1 Demo Song List Demo songs are original (©2002 Yamaha Corporation) except for the three songs listed below. Refer to the voice list on page 17 for voice key assignments. The demo songs listed below are short re-arranged excerpts from the original compositions. Key Voice Name Title Composer C1 GrandPiano1 Consolation No.3 F. Liszt E1 Harpsichord1 Gavotte J.S. Bach F1 Harpsichord2 Invention No.1 J.S. Bach Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume. 4. Stop the Voice demo. Press the [DEMO] button to stop playback. CLP-115 Listening to the Demo Songs 15 Listening to 50 Piano Preset Songs The CLP-115 provides performance data for 50 piano songs. You can simply listen to these songs. You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset songs. Procedure ENGLISH 1. Engage Preset Song mode. Press the [DEMO] button to engage Preset Song mode. The [DEMO] button indicator will light. 2. Play a preset song.  While holding down the [DEMO] button, press one of the C2–C 6 keys to select and start the corresponding tune. To play all preset songs in sequence, while holding down the [DEMO] button, press the D6 key.  C6 DEMO TERMINOLOGY Song: On the CLP-115, performance data is called a “Song.” This includes demo songs and piano preset tunes. TIP You can play the keyboard along with the preset song. You can change the voice playing on the keyboard. TIP C2 D6 The highest key Adjusting the Volume Use the [MASTER VOLUME] control to adjust the volume. 3. Stop playback. Playback will stop automatically when the selected preset song has finished. To stop the song during playback (or continuous playback), press the [DEMO] button. • To continue playing other songs, see procedure 2 above. You can adjust the Reverb type (page 18) that is applied to the voice you play on the keyboard and to the preset song playback. NOTE The default tempo is automatically selected whenever a new preset song is selected, and when a new preset song begins playback. NOTE To adjust the tempo of the preset song playback, see page 21. NOTE When you select a different song (or a different song is selected during chained playback), an appropriate reverb type will be selected accordingly. NOTE MIDI reception is not possible in Piano Song mode. Piano song data is not transmitted via the MIDI connectors. 16 CLP-115 Listening to 50 Piano Preset Songs Selecting & Playing Voices Selecting Voices Procedure    TIP To understand the characteristics of various voices, listen to demo songs for each voice (page 15).  C1 D1 F1 G1 VOICE TERMINOLOGY The lowest key Key Voice: On the CLP-115, a voice means a “tone” or “tonal color.” C1 D1 E1 F1 G1 A1 Voice Name Description NOTE Selecting a voice automatically engages the best-suited reverb type and depth (page 18) for that particular voice. C1 Grand Piano 1  Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano. C1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music. D1 E.Piano 1  An electronic piano sound created by FM synthesis. Good for popular music. D1 E.Piano 2 The sound of an electric piano using hammer-struck metallic “tines.” Soft tone when played lightly, and an aggressive tone when played hard. E1 Harpsichord 1 The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response. F1 Harpsichord 2 Mixes the same voice an octave higher for a more brilliant tone. Vibraphone Vibraphone played with relatively soft mallets. It has a tremolo effect that is typical for vibraphone. G1 Church Organ 1  This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period. G1 Church Organ 2 This is the organ’s full coupler sound, often associated with Bach’s “Toccata and Fugue”. A1 Strings Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode.  F1 Using the Pedals Damper (Right) Pedal The damper pedal functions in the same way as a damper pedal on an acoustic piano. When the damper pedal is pressed, notes sustain longer. Releasing the pedal immediately stops (damps) any sustained notes. ENGLISH While holding down the [VOICE] button, press one of the C1–A1 keys to select and start the corresponding voice. Then, when you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level. NOTE  If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the main unit (page 30).     When you press the damper pedal here, the notes you play before you release the pedal sustain longer. CLP-115 Selecting & Playing Voices 17 ENGLISH Sostenuto (Center) Pedal If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played “staccato.”      NOTE Organ and string voices will continue to sound for as long as the sostenuto pedal is depressed. When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. Soft (Left) Pedal The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed. Adding Variations to the Sound – Reverb This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience. Procedure When you select a reverb, the reverb is automatically turned on. While holding down the [VOICE] button, press one of the C2–E2 keys to select a reverb type.   C2 D2 VOICE The lowest key Key Reverb Type C2 D2 E2 Description C2 Room  This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room. C2 Hall1 For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall. D2 Hall2  For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall. D2 Stage Simulates the reverb of a stage environment. E2 Off No effect is applied. Adjusting Reverb Depth  Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while holding down the [VOICE] button. The depth range is from 0 through 20.  G 4: depth 20 VOICE TIP The default reverb type (including OFF) and depth settings are different for each voice. TIP The lowest key C3: depth 0 The depth value increases as you press higher keys. 18 CLP-115 Selecting & Playing Voices depth 0: depth 20: no effect maximum reverb depth Combining Two Voices (Dual mode) You can play two voices simultaneously across the entire range of the keyboard. In this way, you can simulate a melody duet or combine two similar voices to create a thicker sound. Procedure 1. Engage Dual mode. NOTE Reverb in Dual Mode The reverb type assigned to Voice 1 will take priority over the other. (If the reverb is set to OFF, Voice 2 reverb type will be in effect.) Reverb depth setting (page 18) will be applied only to Voice 1. VOICE The lowest key C1 TIP A1 ENGLISH While holding down the [VOICE] button, press two of the C1–A1 keys at simultaneously (or press one key while holding another). Refer to the voice list on page 17 for available voices. You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode. According to the voice priority shown in the voice list (page 17), the voice assigned to the lower keyboard will be designated as Voice 1 (the other voice will be designated as Voice 2). You can make the following settings only in Dual mode: Setting the Octave You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave. While holding down the [VOICE] button, press one of the C5–F5 keys. C5 F5 VOICE The highest key For setting the octave. (C5–F5)  C5 key: –1 (Voice 1), C 5 key: 0 (Voice 1), D5 key: +1(Voice 1),  D 5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2) Setting the Balance You can set one voice as the main voice, and another voice as a softer, mixed voice.   While holding down the [VOICE] button, press one of the F 5–F 6 keys. A setting of “0” produces an equal balance between the two Dual mode voices. Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and settings above “0” increases the volume of Voice 1 in relation to Voice 2.  F6  F5 VOICE -6 -4 -2 +1 +3 +6 -5 -3 -1 0 +2 +4 +5 For setting the balance. (F5–F6) The highest key 2. Exit Dual mode and return to normal play mode. While holding down the [VOICE] button, press one of the C1–A1 keys. CLP-115 Selecting & Playing Voices 19 Transposition The CLP-115’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as though it were in C major, and the CLP-115 will transpose it to the key of F. Procedure    ENGLISH While holding down the A-1 and C 0 keys, press one of the F 2–F 3 keys to set the desired amount of transposition. A-1 C  0 F 2 -6 -4 -2 C3 +1 +3 TERMINOLOGY Transpose: Changing the key signature of a song. On the CLP-115, transposing shifts the pitch of the entire keyboard. F 3 +6 -5 -3 -1 0 +2 +4 +5 Transpose Transpose down. up. Normal pitch. TIP Pressing the C3 key produces normal keyboard pitch. Pressing the key to the left of C3 (=B2) transposes the pitch of the keyboard down a semitone, the next key to the left   (=B 2) transposes down a whole tone (two semitones), etc., down to the F 2 key, which transposes down six semitones. Upward transposition is accomplished in the same way  using the keys to the right of C3, up to F 3, which transposes up six semitones. Notes below and above the A-1 .... C7 range of the CLP-115 sound one octave higher and lower, respectively. Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument. This function is useful when you play the CLP115 along with other instruments or CD music. TERMINOLOGY Procedure To tune up (in about 0.2Hz steps): Hold down the A-1 and B-1 keys simultaneously and press any key between C3 and B3. To tune down (in about 0.2Hz steps):  Hold down the A-1 and A -1 keys simultaneously and press any key between C3 and B3. To restore standard pitch:  Hold down the A-1, A -1 and B-1 simultaneously and press any key between C3 and B3. To tune up A-1 B-1 To tune down  A -1 A-1 Setting range: 427.0-453.0 Hz Standard pitch: 440.0 Hz 20 CLP-115 Selecting & Playing Voices To restore standard pitch  A -1 A-1 B-1 C3 B3 Hz (Hertz): This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Using the Metronome The CLP-115 features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing. Procedure 1. Start the metronome. Press the [METRONOME] button to turn on the metronome. Determines the time signature   C3 D3 METRONOME  NOTE During preset song playback, you can set the tempo from 20 to 400 beats per minute, depending on the song data. ENGLISH While holding down the [METRONOME] button, press one of the C3–F3 keys. The highest key C3 D3 E3 F3  C3 key: No downbeat, C 3 key: 2/4, D3 key: 3/4, D 3 key: 4/4, E3 key: 5/4, F3 key: 6/4 Adjusting the tempo The tempo of the metronome and preset song playback can be set from 32 to 280 beats per minute. While holding down the [METRONOME] button, press a sequence of C4–A4 keys to specify a three-digit number. Select a number starting from the left-most digit. For example, to set the tempo “95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence. METRONOME 1 3 6 8 0 2 4 5 7 9 C4 The highest key A4 To increase the tempo value in steps of one, while holding down the [METRO NOME] button, press the C 5 key. To decrease the tempo value in steps of one, while holding down the [METRONOME] button, press the B4 key. To increase the tempo value in steps of ten, while holding down the [METRONOME] button, press the D5 key. To decrease the tempo value in steps of ten,  while holding down the [METRONOME] button, press the A 4 key. To set the default tempo (the metronome’s original tempo or the song’s original tempo), while holding down the [METRONOME] button, press the C5 key.  A4  C5 METRONOME B4 C5 D5 The highest key CLP-115 Selecting & Playing Voices 21 Adjusting the volume You can change the volume of the metronome sound. While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume. METRONOME The lowest key C1 G2 ENGLISH The volume level increases as you press higher keys. 22 2. Stop the metronome. Turn off the metronome by pressing the [METRONOME] button. CLP-115 Selecting & Playing Voices About MIDI MIDI connectors MIDI THRU OUT TIP MIDI performance data and commands are transferred in the form of numeric values. TIP Since MIDI data that can be transmitted or received varies depending on the type of MIDI device, check the “MIDI Implementation Chart” to find out what MIDI data and commands your devices can transmit or receive. The CLP-115’s MIDI Implementation Chart appears on page 38. ENGLISH MIDI (Musical Instrument Digital Interface) is a standard format for data transmission and reception. It enables the transfer of performance data and commands between MIDI devices and personal computers. Using MIDI, you can control a connected MIDI device from the CLP115, or control the CLP-115 from a connected MIDI device or computer. IN MIDI [IN]: Receives MIDI data. MIDI [OUT]: Transmits MIDI data. MIDI [THRU]: Transmits data received at the MIDI [IN] connector, passing it through the unit unmodified. MIDI cables Prepare dedicated MIDI cables. TIP You can also obtain detailed information about MIDI from various music books and other publications. CLP-115 About MIDI 23 Connecting a Personal Computer You can enjoy computer music data on the CLP-115 by connecting a computer to the MIDI jack. ENGLISH NOTE When the CLP-115 is used as a tone module, performance data with voices that are not found on the CLP-115 will not be played correctly. “The Clavinova-Computer Connection,” is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for a specific models). The document is available as a PDF file (in English) at the following Internet address: Clavinova Web site (English only): http://www.yamahaclavinova.com/ Yamaha Manual Library: http://www2.yamaha.co.jp/manual/english/ There are two methods by which to connect the Clavinova to a personal computer: 1. Use a MIDI interface and the CLP-115’s MIDI connectors (page 25). 2. Use the USB port on the computer and a USB interface (model UX16, UX96, or UX256) (page 25). NOTE 24 Before you connect the CLP-115 to a personal computer, first turn off the power to both the CLP-115 and the computer. After you make the connections, turn on the power to the computer first, then turn on the power to the CLP-115. CLP-115 Connecting a Personal Computer 1. Using a MIDI interface and the CLP-115’s MIDI connectors Connection Use a MIDI interface to connect a computer to the CLP-115 using special MIDI cables. CLP-115 MIDI OUT IN MIDI IN MIDI OUT MIDI OUT MIDI OUT MIDI IN ENGLISH THRU MIDI IN MIDI interface MIDI interface Windows Macintosh 2. Connecting the computer’s USB port to the CLP-115 via a USB interface, such as the UX16,UX96, or UX256 Connect the computer’s USB port to the USB interface (such as the UX16, UX96, or UX256) using a USB cable. Install the driver (that came with the USB interface) on the computer, and connect the USB interface to the CLP-115 using a serial cable or MIDI cables. For more information, refer to the instruction manual for the USB interface. An example of connecting the USB interface to the CLP-115 using MIDI cables MIDI USB cable THRU OUT IN MIDI cables computer CLP-115 USB interface MASTER VOLUME MIN MAX POWER DEMO METRONOME VOICE CLP-115 Connecting a Personal Computer 25 MIDI Functions You can make detailed adjustments to MIDI settings. For more information about MIDI, see the “About MIDI” section (page 23). MIDI Transmit/Receive Channel Selection ENGLISH In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer. This parameter enables you to specify the channel on which the CLP-115 transmits or receives MIDI data. NOTE Procedure Setting the transmit channel In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to “OFF.”  While holding down the A-1 and C 0 keys, press one of the C1–E2 keys. Setting the receive channel  While holding down the A-1 and C 0 keys, press one of the C4–F5 keys.  A-1 C 0 E2  D2 C1 2 4 7 9 11 14 16 E5 F5 C4 2 4 7 9 11 14 16 1 3 5 6 8 10 12 13 15 1 3 5 6 8 10 12 13 15 1+2 For setting the transmit channels.  (C1–D 2) For setting the receive channels. (C4–F5) OFF For ALL mode Local Control ON/OFF “Local Control” refers to the fact that, normally, the CLP-115 keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the CLP-115 keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. Procedure C6 The highest key CLP-115 MIDI Functions TIP Program change and other like channel messages received will not affect the CLP-115’s panel settings or the notes you play on the keyboard. The CLP-115 does not receive MIDI data when it is in Demo or Preset Song mode. While holding down the A-1 and C 0 keys, press the C6 key.  A-1 C 0 TIP ALL: A “Multi-timbre” Receive mode is available. It allows simultaneous reception of different parts on all 16 MIDI channels, enabling the CLP-115 to play multi-channel song data received from a music computer or sequencer. 1+2: A “1+2” Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling the CLP-115 to play 1 and 2 channel song data received from a music computer or sequencer. NOTE  26 NOTE Demo and preset song data are not transmitted via MIDI. Program Change ON/OFF Normally the CLP-115 will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The CLP-115 will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the CLP-115 without affecting the external MIDI device. TIP For information on program change numbers for each of the CLP-115’s voices, refer to page 35 in the MIDI Data Format section.  ENGLISH Procedure  While holding down the A-1 and C 0 keys, press the C 6 key.  A-1 C 0  C6 The highest key Control Change ON/OFF Normally the CLP-115 will respond to MIDI control change data received from an external MIDI device or keyboard, causing the voice on the corresponding channel to be affected by pedal and other “control” settings received from the controlling device (the keyboard voice is not affected). The CLP-115 also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the CLP-115’s pedal and other controls can be operated without affecting an external MIDI device. TIP For information on control changes that can be used with the CLP-115, refer to the MIDI Data Format on page 34. Procedure  While holding down the A-1 and C 0 keys, press the D6 key.  A-1 C 0 D6 The highest key CLP-115 MIDI Functions 27 Troubleshooting ENGLISH Problem Possible Cause and Solution The CLP-115 does not turn on. The CLP-115 has not been plugged in properly. Securely insert the female plug into the socket on the CLP-115, and the male plug into a proper AC outlet (page 11). A click or pop is heard when the power is turned on or off. This is normal when electrical current is being applied to the instrument. Noise from the speakers or headphones is audible. The noise may be due to interference caused by the use of a mobile phone in close proximity to the CLP-115. Turn off the mobile phone, or move it further away from the CLP-115. The overall volume is low, or no sound is heard. • The Master Volume is set too low. Set it to an appropriate level using the [MASTER VOLUME] control. • Make sure a pair of headphones is not connected to the headphones jack. • Make sure that Local Control (page 26) is ON. The damper pedal has no effect, or the sound continuously sustains even when the damper pedal is not pressed. The pedal cord may not be properly connected. Make sure to securely insert the pedal cord into the [PEDAL] jack (page 30). Options BC-100 Bench A comfortable bench styled to match your Yamaha Clavinova. HPE-160 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads. 28 CLP-115 CLP-115 Troubleshooting Troubleshooting/Options Keyboard Stand Assembly CAUTION • Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. Attach the side panels to the pedal box. Have a Phillips-head (+) screwdriver ready (2) Align the sides of the pedal box with the left and right side panels. Side panel (right) ENGLISH 1. Remove the following parts from the package. Side panel (left) Assembly Parts 4 × 20 mm tapping screws ×4 4 6 × 16 mm short screws ×4 2 (3) Use the four 6×20 mm long screws 1 to attach the pedal box. Cord holders × 2 L (1) Untie and straighten out the bundled cord attached to the bottom of the pedal box. Don’t discard the twist tie, you’ll need it later in step 5. 4 × 12 mm thin screws ×2 3 2. Attach the rear panel. (1) Secure the top of the rear panel to the side panel brackets using two 4×12 mm thin screws 3. Main unit Rear panel Side panel (right) Pedal box AC power cord Bundled pedal cord inside TIP R Side panel (left) Place the bottom edges of the rear panel on the feet’s protruding edges, with the panel slightly angled as shown in the illustration. L 6 × 20 mm long screws ×4 1 (2) Secure the bottom of the rear panel to the pedal box using four 4×20 mm tapping screws 4. A headphone hanger is included in the CLP-115 package. You can attach a headphone hanger on the CLP-115 to hang the headphones (page 12). CLP-115 Keyboard Stand Assembly 29 3. Mount the main unit. 5. Connect the pedal cord. PEDA L CAUTION • Fingers can become pinched between the main unit and the rear or side panels, be extra careful so as not to drop the main unit. • Do not hold the keyboard in any position other than the position shown in the illustration. ENGLISH Be sure to place your hands at least 10 cm from either end of the main unit when positioning it. (1) Insert the pedal cord plug to the pedal connector from the rear. (3) Use a twist tie to take up any slack in the pedal cord. At least 10 cm R (2) Attach the cord holders to the rear panel as shown, then clip the cord into the holders. Fix the main unit. (1) Center the main unit to produce equal clearance on the left and right sides. 6. Set the voltage selector and connect the power cord. (2) Use 6x16 mm short screws 2 to secure the main unit from the front. 127 220 110 4. 240 Voltage Selector Before connecting the AC power cord, check the setting of the voltage selector which is provided in some areas. To set the selector for 110V, 127V, 220V or 240V main voltages, use a “minus” screwdriver to rotate the selector dial so that the correct voltage for your region appears next to the pointer on the panel. The voltage selector is set at 240V when the unit is initially shipped. After the proper voltage has been selected, connect the AC power cord to the AC INLET and an AC wall outlet. A plug adaptor may be also provided in some areas to match the pin configuration of the AC wall outlets in your area. 30 CLP-115 Keyboard Stand Assembly WARNING An improper voltage setting can cause serious damage to the CLP-115 or result in improper operation. 7. Set the adjuster. ENGLISH Rotate the adjuster until it comes in firm contact with the floor surface. After completing the assembly, please check the following. • Are there any parts left over? ➝ Review the assembly procedure and correct any errors. • Is the CLP-115 clear of doors and other movable fixtures? ➝ Move the CLP-115 to an appropriate location. • Does the CLP-115 make a rattling noise when you shake it? ➝ Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? ➝ Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? ➝ Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. When moving the instrument after assembly, always hold the bottom of the main unit. CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. Key cover Top portion CLP-115 Keyboard Stand Assembly 31 Index Numerics 50 Greats for the Piano ...................................................16 50 Piano Preset Songs .....................................................16 A ENGLISH Accessories .........................................................................8 Adjust Reverb Depth.............................................................18 Tempo (metronome) ................................................21 Volume (50 Piano Preset Songs) ..............................16 Volume (Demo) ........................................................15 Volume (metronome)...............................................22 Assembly ....................................................................29–31 MIDI Data Format.......................................................... 34 MIDI Implementation Chart ......................................... 38 Music Rest ....................................................................... 10 P PEDAL ....................................................................... 14, 30 PHONES.................................................................... 12, 14 POWER ..................................................................... 11, 14 PRECAUTIONS............................................................6–7 Preset songs ➝ 50 Piano Preset Songs ........................... 16 R Reverb.............................................................................. 18 C Center Pedal ..............................................................14, 18 Combining Two Voices (Dual mode)............................19 Connecting a Personal Computer ..................................24 Right Pedal ................................................................ 14, 17 S Soft Pedal................................................................... 14, 18 Song ................................................................................. 16 D Damper Pedal ............................................................14, 17 Sostenute Pedal ......................................................... 14, 18 Specifications................................................................... 39 Dual mode .......................................................................19 Start/Stop playback 50 Piano Preset Songs ............................................... 16 Demo Songs............................................................... 15 H T Headphone Hanger.........................................................12 Transporting ..................................................................... 8 Headphones.....................................................................12 Transposition .................................................................. 20 DEMO........................................................................14–16 Troubleshooting.............................................................. 28 K Key Cover ........................................................................10 V VOICE .................................................................14, 17–19 L Left Pedal ...................................................................14, 18 M MASTER VOLUME ..................................................11, 14 METRONOME ...................................................14, 21–22 MIDI ................................................................................23 MIDI [IN] [OUT] [THRU]......................................14, 23 MIDI cables ...............................................................23, 25 MIDI connectors .......................................................23, 25 32 CLP-115 Index Appendix/Anhang/ Annexe/Apéndice This section introduces reference material. In diesem Abschnitt finden Sie Referenzmaterial. Cette section présente le matériel de référence. En esta sección se incluye material de referencia. MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI ................... 34 MIDI Implementation Chart / MIDI Implementierung stabelle / Feuille d’implantation MIDI / Gráfica de implementación MIDI ................................................................... 38 Specifications / Technische Daten / Caractéristiques techniques / Especificaciones .......................................... 39 CLP-115 33 MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computergenerated MIDI messages, the data provided in this section can help you to control the CLP-115. Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des CLP-115 nach den im folgenden Abschnitt aufgeführten Spezifikationen richten. Si vous êtes très familier avec l’interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le CLP-115. SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la CLP-115. 1. NOTE ON/OFF 3. MODE MESSAGES Data format: [9nH] -> [kk] -> [vv] Data format: [BnH] -> [cc] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8)* vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H) Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity * If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary number of octaves. 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Main Volume (reception only) ccH Parameter Data Range (vvH) 07H Volume MSB 00H...7FH (3) Expression (reception only) ccH Parameter Data Range (vvH) 0BH Expression MSB 00H...7FH (4) Damper ccH Parameter 40H Damper MSB Data Range (vvH) 00H...7FH (5) Sostenuto ccH Parameter 42H Sostenuto Data Range (vvH) 00H-3FH:off, 40H-7FH:on (6) Soft Pedal ccH Parameter 43H Soft Pedal Data Range (vvH) 00H-3FH:off, 40H-7FH:on (7) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level. (8) Effect4 Depth (Variation Effect Send Level) (reception only) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H...7FH 34 CLP-115 Appendix/Anhang/Annexe/Apéndice BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off ccH Parameter 78H All Sound Off (2) Reset All Controllers ccH Parameter 79H Reset All Controllers Resets controllers as follows. Controller Expression Damper Pedal Sostenuto Soft Pedal Data Range (vvH) 00H Data Range (vvH) 00H Value 127 (max) 0 (off) 0 (off) 0 (off) (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the damper or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. • When control change reception is turned OFF, control change data will not be transmitted or received except for Bank Select and Mode messages. • Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. • The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received. 4. PROGRAM CHANGE 6. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number Voice Name Grand Piano 1 Grand Piano 2 E.Piano 1 E.Piano 2 Harpsichord 1 Harpsichord 2 Vibraphone Church Organ 1 Church Organ 2 Strings MSB 0 0 0 0 0 0 0 0 0 0 LSB 122 112 122 122 122 123 122 123 122 122 P.C.# 1 1 6 5 7 7 12 20 20 49 • When you specify a program change as a number in the range of 0-127, specify a number that is one less than the program number listed above. For example, to specify program number 1, you would specify program change 0. • When program change reception is turned OFF, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received. 5. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data F8H Transmission Transmitted every 96 clocks FAH Song start FCH Song stop FEH Transmitted every 200 milliseconds (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H] MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = don’t care 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive (2) Universal Non-Realtime Message (GM On) General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H] Reception Received as 96-clock tempo timing when MIDI clock is set to External. Song start Not received when the MIDI clock is set to Internal. Song stop Not received when the MIDI clock is set to Internal. If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received. • Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs. F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = don’t care 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive When the General MIDI mode ON message is received, the MIDI system will be reset to its default settings. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. CLP-115 Appendix/Anhang/Annexe/Apéndice 35 7. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | F7H = End of Exclusive Data size must match parameter size (2 or 4 bytes). When the XG System On message is received, the MIDI system will be reset to its default settings. The message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. (2) XG Native Bulk Data (reception only) Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] -> [bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...-> [ccH] -> [F7H] F0H = Exclusive status 43H = YAMAHA ID 0nH = When received, n=0~F. When transmitted, n=0. 4CH = Model ID of XG aaH = ByteCount bbH = ByteCount hhH = Address High mmH = Address Mid llH = Address Low ddH = Data | | | | ccH = Check sum F7H = End of Exclusive • Receipt of the XG SYSTEM ON message causes reinitialization of relevant parameters and Control Change values. Allow sufficient time for processing to execute (about 50 msec) before sending the CLP-115 another message. • XG Native Parameter Change message may contain two or four bytes of parameter data (depending on the parameter size). • For information about the Address and Byte Count values, refer to Table 1 below. Note that the table’s Total Size value gives the size of a bulk block. Only the top address of the block (00H, 00H, 00H) is valid as a bulk data address. 8. SYSTEM EXCLUSIVE MESSAGES (Clavinova MIDI Format) Data format: [F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H] F0H = Exclusive status 43H = Yamaha ID 73H = Clavinova ID 01H = Product ID (CLP common) or 7F= Extended Product ID 24H = Product ID nnH = Substatus nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data (the bulk data follows 06H) F7H = End of Exclusive * When nn=02H or 03H, Clavinova common ID (01H) is rec-ognized as well as 75H. 36 CLP-115 Appendix/Anhang/Annexe/Apéndice 9. SYSTEM EXCLUSIVE MESSAGES (Special Control) Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H] F0H = 43H = 73H = 7FH = 24H = 11H = 0nH = cc = vv = F7H = Exclusive status Yamaha ID Clavinova ID Extended Product ID Product ID Special control Control MIDI change (n=channel number) Control number Value End of Exclusive Control Metronome Channel Always 00H ccH 1BH vvH 00H : off 01H : – 02H : 2/4 03H : 3/4 04H : 4/4 05H : 5/4 06H : 6/4 7FH : No accent Channel Detune ch: 00H-0FH 43H (Sets the Detune value for each channel) 00H-7FH Voice Reserve ch: 00H-0FH 45H 00H : Reserve off 7FH : on* * When Volume, Expression is received for Reserve On, they will be effective from the next Key On. Reserve Off is normal. 10. SYSTEM EXCLUSIVE MESSAGES (Others) Data format: [F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H] -> [00H] -> [mmH] -> [llH] -> [ccH] -> [F7H] Master Tuning (XG and last message priority) simultaneously changes the pitch of all channels. F0H = Exclusive Status 43H = Yamaha ID 1nH = When received, n=0~F. When transmitted, n=0. 27H = Model ID of TG100 30H = Sub ID 00H = 00H = mmH = Master Tune MSB llH = Master Tune LSB ccH = don’t care (under 7FH) F7H = End of Exclusive <Table 1> MIDI Parameter Change table (SYSTEM) Address (H) Size (H) Data (H) 00 00 00 4 020C - 05F4(*1) 01 02 03 04 1 05 1 06 1 7E 7F TOTAL SIZE 07 00 - 7F — 34 - 4C(*2) 00 00 Parameter MASTER TUNE MASTER VOLUME — TRANSPOSE XG SYSTEM ON RESET ALL PARAMETERS Description -50 - +50[cent] 1st bit 3 - 0 ➝ bit 15 - 12 2nd bit 3 - 0 ➝ bit 11 - 8 3rd bit 3 - 0 ➝ bit 7 - 4 4th bit 3 - 0 ➝ bit 3 - 0 0 - 127 Default value (H) 00 04 00 00 400 -12 - +12[semitones] 00=XG system ON 00=ON (receive only) 40 7F *1: Values lower than 020CH select -50 cents. Values higher than 05F4H select +50 cents. *2: Values from 28H through 33H are interpreted as -12 through -1. Values from 4DH through 58H are interpreted as +1 through +12. <Table 2> MIDI Parameter Change table (EFFECT 1) Refer to the “Effect MIDI Map” for a complete list of Reverb, Chorus and Variation type numbers. Address (H) 02 01 00 Size (H) 2 02 01 40 2 Data (H) 00-7F 00-7F Parameter REVERB TYPE MSB REVERB TYPE LSB 00-7F VARIATION TYPE MSB 00-7F VARIATION TYPE LSB • “VARIATION” refers to the EFFECT on the panel. Description Refer to Effect MIDI Map 00 : basic type Default value (H) 01(=HALL1) 00 Refer to Effect MIDI Map 00 : basic type 00(=Effect off) 00 Description 0 - 127 Default value (H) 7F <Table 3> MIDI Parameter Change table (MULTI PART) Address (H) Size (H) 08 nn 11 1 nn = Part Number Data (H) 00 - 7F Parameter DRY LEVEL • Effect MIDI Map REVERB ROOM HALL 1 HALL 2 STAGE MSB 02H 01H 01H 03H LSB 10H 10H 11H 10H MSB 42H 48H 46H 05H LSB 10H 10H 10H 10H EFFECT CHORUS PHASER TREMOLO DELAY CLP-115 Appendix/Anhang/Annexe/Apéndice 37 YAMAHA [Clavinova] MIDI Implementation Chart Model: CLP-115 MIDI Implementation Chart Function Date: 7 Mar, 2003 Version: 1.0 Transmitted Recognized Remarks Basic Channel Default Changed 1 1 - 16 1 1 - 16 Mode Default Messages Altered 3 X ***************** 1 X X : True voice 9 - 120 ***************** 0 - 127 0 - 127 Velocity Note ON Note OFF O 9nH, v=1 - 127 O 9nH, v=0 O 9nH, v=1 - 127 O 9nH, v=0 or 8nH After Touch Key’s Ch’s X X X X X X 0, 32 O O Bank Select 7 O O Volume 11 X O Expression 64 O O Damper 66 O O Sostenuto 67 O O Soft pedal 91 O O Reverb Depth 94 X O Effect Depth O ***************** O O O Note Number Pitch Bend Control Change Program Change : True # System Exclusive Common : Song Pos. : Song Sel. : Tune X X X X X X System Real Time : Clock : Commands O O O O : All Sound Off : Reset All Cntrls : Local ON/OFF : All Notes OFF : Active Sense : Reset O O X O O X O (120, 126, 127) O (121) O (122) O (123 - 125) O X Aux Messages *1 Poly Mode only Notes : *1 = Recieve Mode is always multi timbre and Poly mode. Mode 1: OMNI ON, POLY Mode 3: OMNI OFF, POLY 38 Mode 2: OMNI ON, MONO Mode 4: OMNI OFF, MONO CLP-115 Appendix/Anhang/Annexe/Apéndice O : Yes X : No Specifications / Technische Daten / Caractéristiques techniques / Especificaciones CLP-115 Item Keyboard 88 keys (A-1 - C7) Sound Source AWM Stereo Sampling Polyphony 32 Notes Max. Voice Selection 10 Effect Reverb Volume Master Volume Controls Dual, Metoronome, Transpose Pedal Damper, Sostenuto, Soft Demo Songs 10 voice Demo Songs, 50 preset Songs Jacks/Connectors MIDI (IN/OUT/THRU), PHONES × 2 Main Amplifiers 20W × 2 Speakers Oval (12cm × 6cm) × 2 Dimensions (W × D × H) (with music rest) 1345mm × 426mm × 815mm [52-15/16" × 16-3/4" × 32-1/16"] (1345mm × 426mm × 968mm) [53-15/16" × 16-3/4" × 38-1/8"] Weight 41kg (90lbs., 6oz) Accessories Owner’s Manual, “50 greats for the Piano” (Music Book), Bench (included or optional depending on locale), Quick Operation Guide * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. * Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit Ihrem Yamaha-Händler in Verbindung. * Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur Yamaha le plus proche. * Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha. CLP-115 Appendix/Anhang/Annexe/Apéndice 39 MEMO 40 CLP-115 Appendix/Anhang/Annexe/Apéndice MEMO CLP-115 Appendix/Anhang/Annexe/Apéndice 41 MEMO 42 CLP-115 Appendix/Anhang/Annexe/Apéndice IMPORTANT SAFETY INSTRUCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed. These precautions include, but are not limited to, the following: 1. Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructions found in this manual BEFORE making any connections, including connection to the main supply. 2. Main Power Supply Verification: Yamaha products are manufactured specifically for the supply voltage in the area where they are to be sold. If you should move, or if any doubt exists about the supply voltage in your area, please contact your dealer for supply voltage verification and (if applicable) instructions. The required supply voltage is printed on the name plate. For name plate location, please refer to the graphic found in the Special Message Section of this manual. 3. This product may be equipped with a polarized plug (one blade wider than the other). If you are unable to insert the plug into the outlet, turn the plug over and try again. If the problem persists, contact an electrician to have the obsolete outlet replaced. Do NOT defeat the safety purpose of the plug. 4. Some electronic products utilize external power supplies or adapters. Do NOT connect this type of product to any power supply or adapter other than one described in the owners manual, on the name plate, or specifically recommended by Yamaha. 5. WARNING: Do not place this product or any other objects on the power cord or place it in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. 6. Ventilation: Electronic products, unless specifically designed for enclosed installations, should be placed in locations that do not interfere with proper ventilation. If instructions for enclosed installations are not provided, it must be assumed that unobstructed ventilation is required. 7. Temperature considerations: Electronic products should be installed in locations that do not significantly contribute to their operating temperature. Placement of this product close to heat sources such as; radiators, heat registers and other devices that produce heat should be avoided. 8. This product was NOT designed for use in wet/damp locations and should not be used near water or exposed to rain. Examples of wet/damp locations are; near a swimming pool, spa, tub, sink, or wet basement. 9. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product. 10. The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. Cords should also be disconnected when there is a high probability of lightning and/or electrical storm activity. 11. Care should be taken that objects do not fall and liquids are not spilled into the enclosure through any openings that may exist. 12. Electrical/electronic products should be serviced by a qualified service person when: a. The power supply cord has been damaged; or b. Objects have fallen, been inserted, or liquids have been spilled into the enclosure through openings; or c. The product has been exposed to rain: or d. The product dose not operate, exhibits a marked change in performance; or e. The product has been dropped, or the enclosure of the product has been damaged. 13. Do not attempt to service this product beyond that described in the user-maintenance instructions. All other servicing should be referred to qualified service personnel. 14. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. 15. Some Yamaha products may have benches and/or accessory mounting fixtures that are either supplied as a part of the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. PLEASE KEEP THIS MANUAL 92-469-2 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord IMPORTANT. The wires in this mains lead are coloured in accordance with the following code: BLUE : NEUTRAL BROWN : LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. (2 wires) • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. (polarity) • This applies only to products distributed by Yamaha Canada Music Ltd. • Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée. (class B) For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Ave., Buena Park, Calif. 90620, U.S.A. Tel: 714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mexico S.A. De C.V., Departamento de ventas Javier Rojo Gomez No.1149, Col. Gpe Del Moral, Deleg. Iztapalapa, 09300 Mexico, D.F. Tel: 686-00-33 BRAZIL Yamaha Musical do Brasil LTDA. Av. Rebouças 2636, São Paulo, Brasil Tel: 011-853-1377 ARGENTINA Yamaha Music Latin America, S.A. Sucursal de Argentina Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha Music Latin America, S.A. Torre Banco General, Piso 7, Urbanización Marbella, Calle 47 y Aquilino de la Guardia, Ciudad de Panamá, Panamá Tel: +507-269-5311 EUROPE THE UNITED KINGDOM Yamaha-Kemble Music (U.K.) Ltd. Sherbourne Drive, Tilbrook, Milton Keynes, MK7 8BL, England Tel: 01908-366700 IRELAND Danfay Ltd. 61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin Tel: 01-2859177 GERMANY Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 SWITZERLAND/LIECHTENSTEIN Yamaha Music Central Europe GmbH, Branch Switzerland Seefeldstrasse 94, 8008 Zürich, Switzerland Tel: 01-383 3990 AUSTRIA Yamaha Music Central Europe GmbH, Branch Austria Schleiergasse 20, A-1100 Wien, Austria Tel: 01-60203900 THE NETHERLANDS Yamaha Music Central Europe, Branch Nederland Clarissenhof 5-b, 4133 AB Vianen, The Netherlands Tel: 0347-358 040 Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. ASIA BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 FRANCE Yamaha Musique France, S.A. Division Professionnelle BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY Yamaha Musica Italia S.P.A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha-Hazen Música, S.A. Ctra. de la Coruna km. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 GREECE Philippos Nakas S.A. The Music House 147 Skiathou Street, 112-55 Athens, Greece Tel: 01-228 2160 SWEDEN Yamaha Scandinavia AB J. A. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 HONG KONG Tom Lee Music Co., Ltd. 11/F., Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. Gatot Subroto Kav. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 KOREA Yamaha Music Korea Ltd. Tong-Yang Securities Bldg. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0661 MALAYSIA Yamaha Music Malaysia, Sdn., Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-703-0900 PHILIPPINES Yupangco Music Corporation 339 Gil J. Puyat Avenue, P.O. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 SINGAPORE Yamaha Music Asia Pte., Ltd. 11 Ubi Road #06-00, Meiban Industrial Building, Singapore Tel: 65-747-4374 DENMARK YS Copenhagen Liaison Office Generatorvej 8B DK-2730 Herlev, Denmark Tel: 44 92 49 00 FINLAND F-Musiikki Oy Kluuvikatu 6, P.O. Box 260, SF-00101 Helsinki, Finland Tel: 09 618511 TAIWAN Yamaha KHS Music Co., Ltd. 3F, #6, Sec.2, Nan Jing E. Rd. Taipei. Taiwan 104, R.O.C. Tel: 02-2511-8688 THAILAND NORWAY Norsk filial av Yamaha Scandinavia AB Grini Næringspark 1 N-1345 Østerås, Norway Tel: 67 16 77 70 ICELAND Skifan HF Skeifan 17 P.O. Box 8120 IS-128 Reykjavik, Iceland Tel: 525 5000 Siam Music Yamaha Co., Ltd. 121/60-61 RS Tower 17th Floor, Ratchadaphisek RD., Dindaeng, Bangkok 10320, Thailand Tel: 02-641-2951 THE PEOPLE’S REPUBLIC OF CHINA AND OTHER ASIAN COUNTRIES Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2317 OCEANIA OTHER EUROPEAN COUNTRIES Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 AFRICA Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 MIDDLE EAST TURKEY/CYPRUS Yamaha Music Central Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: 04101-3030 AUSTRALIA Yamaha Music Australia Pty. Ltd. Level 1, 99 Queensbridge Street, Southbank, Victoria 3006, Australia Tel: 3-9693-5111 NEW ZEALAND Music Houses of N.Z. Ltd. 146/148 Captain Springs Road, Te Papapa, Auckland, New Zealand Tel: 9-634-0099 COUNTRIES AND TRUST TERRITORIES IN PACIFIC OCEAN Yamaha Corporation, Asia-Pacific Music Marketing Group Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2312 OTHER COUNTRIES Yamaha Music Gulf FZE LB21-128 Jebel Ali Freezone P.O.Box 17328, Dubai, U.A.E. Tel: +971-4-881-5868 HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 Tel: +81-53-460-3273 [CL] 29 CLP-115 CLP-115 Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones Before using the Clavinova, be sure to read “ PRECAUTIONS„ on pages 6 -7. Achten Sie darauf, vor Einsatz des Clavinova die “ VORSICHTSMASSNAHMEN„ auf Seite 6 -7 durchzulesen. Avant d'utiliser le Clavinova, lire attentivement la section « PRECAUTIONS D'USAGE» aux pages 6-7. Antes de utilizar el Clavinova, lea las “ PRECAUCIONES„ que debe tener en cuenta en las páginas 6-7. IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. WICHTIG Überprüfung der Stromversorgung Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V voreingestellt. Zum Verstellen drehen Sie den Spannungsregler mit einem Schlitzschraubendreher, bis der Zeiger auf den korrekten Spannungswert weist. IMPORTANT Clavinova Web site (English only) http://www.yamahaclavinova.com/ Yamaha Manual Library http://www2.yamaha.co.jp/manual/english/ M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation C 2003 Yamaha Corporation WB29560 30?AP???.?-01A0 Printed in Indonesia Contrôler la source d'alimentation Vérifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans certaines régions, l'instrument peut être équipé d'un sélecteur de tension situé sur le panneau inférieur du clavier à proximité du cordon d'alimentation. Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le sélecteur de tension est réglé sur 240 V au départ d'usine. Pour modifier ce réglage, utilisez un tournevis à lame plate pour tourner le sélecteur afin de mettre l'indication correspondant à la tension de votre région vis à vis du repère triangulaire situé sur le panneau. IMPORTANTE Verifique la alimentación de corriente Asegúrese de que tensión de alimentación de CA de su área corresponde con la tensión especificada en la placa de características del panel inferior. En algunas zonas puede haberse incorporado un selector de tensión en el panel inferior de la unidad del teclado principal, cerca del cable de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su área. El selector de tensión se ajusta a 240V cuando la unidad sale de fábrica. Para cambiar el ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la tensión correcta al lado del indicador del panel. DIC 244
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Yamaha CLP-115 El manual del propietario

Categoría
Pianos digitales
Tipo
El manual del propietario
Este manual también es adecuado para