Yamaha ST7 El manual del propietario

Marca: Yamaha

Modelo: ST7

Tipo: El manual del propietario

Yamaha ST7: un estudio personal para músicos que buscan mejorar su práctica y actuaciones.

El Yamaha ST7 es un estudio personal que ofrece a los músicos una forma cómoda y portátil de practicar y tocar su instrumento en cualquier lugar. Con su diseño compacto y ligero, el ST7 es fácil de transportar y configurar, lo que lo convierte en la opción ideal para músicos que viajan o que simplemente quieren tener una forma más cómoda de practicar en casa.

El ST7 cuenta con una variedad de características que lo convierten en una herramienta ideal para músicos de todos los niveles. Estas características incluyen:

Yamaha ST7: un estudio personal para músicos que buscan mejorar su práctica y actuaciones.

El ST7 cuenta con una variedad de características que lo convierten en una herramienta ideal para músicos de todos los niveles. Estas características incluyen:

Yamaha Silent Brass

Personal Studio ST7

Contents of Set

● Personal Studio ST7 ● Owner’s Manual

Thank you for purchasing the Yamaha Silent

Brass Personal Studio ST7. In order to obtain

the maximum performance and enjoyment from

your ST7, we urge you to read this Owner’s

Manual thoroughly before using. Please keep

this Owner’s Manual, and the warranty in a safe

place for later reference.

* Pickup Mute are not included.

REHEARSAL ROOM

CONCERT HALL

CHURCH

REVERB MODE

AUX IN

PLAYER 2

PLAYER 1

REVERB

LEVEL

MASTER

VOLUME

Personal Studio ST7

Frequency Characteristics

PLAYER 1/2 : 200Hz to 16KHz, includes an

internal equalizer

AUX IN : 20Hz to 16 KHz

Input/Output Levels

PICKUP MUTE 1/2 : –38dBm (0dBm=0.775Vrms)

AUX IN : –10dBm

PHONES 1/2 : –10dBm (150Ω impedance)

LINE OUT : –10dBm (10Ω impedance)

Reverb

Digital Converter : Sampling Frequency 32kHz

AD/DA Converter 15 bits

Mode : 3 types (REHEARSAL ROOM,

CONCERT HALL, CHURCH)

Jacks and Terminals (all mini jack type except DC10-12V)

PICKUP MUTE 1/2 : Pickup Mute exclusive (power

(mono)

supply and line signal combined)

PHONES 1/2 : Impedance 8 to 150Ω

(stereo)

(accommodates headphones)

LINE OUT (stereo) : Output impedance 1kΩ

AUX IN (stereo) : Input impedance 30kΩ

DC10-12V : AC adaptor PA-1D (PA-1 for Great Britain)

Control

MASTER VOLUME, PLAYER 1/2 Volume, AUX IN Volume,

REVERB MODE Button and lamps, REVERB LEVEL, POWER

Switch, Belt Hook

Power Supply

AC adaptor PA-1D

six AAA size 1.5V batteries. (Operation with Manganese batteries

last about 3 hours, Alkaline batteries last about 7 hours.)

Dimensions (W x D x H) 111 x 159 x 41 mm

(4-3/8") x (6-1/4") x (1-5/8")

Weight 250 g (0.55 lbs.) without batteries

* Specifications and design are subject to change without notice.

When playing in a

standing position,

the hook on the

back of the ST7 is

convenient for

clipping the unit

onto a belt.

* Pickup Mute, exclusive connection cable and stereo earphone

are not included.

Disconnecting the cable while the power

is ON may result in damage to the unit.

The sudden noise may also may result in

hearing impairments.

PLAYER

Signal path

From PHONES 1

To PICKUP MUTE 1

Your ST7 will give you years of reliable service if you follow the

simple rules given below:

■ Location

Do not expose it to the following conditions to

avoid deformation, discoloration, or more

serious damage.

•Direct sunlight (e.g. near a window).

•High temperatures (e.g. near a heat

source, outside, or in a car during the

daytime).

•Excessive humidity.

•Excessive dust.

•Strong vibration.

■ Power Supply

•

Turn the power switch OFF when not in use.

•If you use an AC power adaptor, unplug

the adaptor from the AC outlet if not to be

used for an extended period of time.

•Unplug the AC power adaptor during

electric storms.

•Avoid plugging the AC power adaptor into

the same AC outlet as appliances with

high power consumption, such as electric

heaters or ovens. Also avoid using multi-

plug adaptors since these can result in

reduced sound quality and possibly dam-

age.

■

Turn Power OFF When Making Connections

•To avoid damage to the Personal Studio

and other devices to which it is connected

(a sound system, for example), turn the

power switches of all related devices OFF

prior to connecting or disconnecting audio

cables.

■ Handling and Transport

•Never apply excessive force to the

controls, connectors or other parts.

•Always unplug cables by gripping the

plug firmly,

not by pulling on the

cable.

•Disconnect all cables before moving

the unit.

•Physical shocks caused by dropping,

bumping, or placing heavy objects on

the unit can result in scratches and

more serious damage.

■ Cleaning

•Clean the cabinet and panel with a

dry soft cloth.

•A slightly damp cloth may be used to

remove stubborn grime and dirt.

•Never use cleaners such as alcohol

or thinner.

•Avoid placing vinyl objects on top of

the unit (vinyl can stick to and

discolor the surface).

■ Electrical Interference

•This unit contains digital circuitry and

may cause interference if placed too

close to radio or television receivers.

If this occurs, move it further away

from the affected equipment.

YAMAHA is not responsible for damage

caused by improper handling or opera-

tion.

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply

(adaptor). DO NOT connect this product to any power

supply or adaptor other than one described in the manual,

on the name plate, or specifically recommended by

Yamaha.

This product should be used only with the components

supplied or; a cart, rack, or stand that is recommended by

Yamaha. If a cart, etc., is used, please observe all safety

markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be

correct at the time of printing. However, Yamaha reserves

the right to change or modify any of the specifications

without notice or obligation to update existing units.

Do not attempt to service this product beyond that

described in the user-maintenance instructions. All other

servicing should be referred to qualified service personnel.

This product, either alone or in combination with an

amplifier and headphones or speaker/s, may be capable of

producing sound levels that could cause permanent

hearing loss. DO NOT operate for long periods of time at

a high volume level or at a level that is uncomfortable. If

you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time

period before damage occurs.

NOTICE: Service charges incurred due to a lack of

knowledge relating to how a function or effect works

(when the unit is operating as designed) are not covered

by the manufacturer’s warranty, and are therefore the

owner’s responsibility. Please study this manual carefully

and consult your dealer before requesting service.

ENVIRONMENTAL ISSUES: Yamaha strives to

produce products that are both user safe and environmen-

tally friendly. We sincerely believe that our products and

the production methods used to produce them meet these

goals. In keeping with both the letter and the spirit of the

law, we want you to be aware of the following:

Battery Notice: This product may also use

“household” type batteries. Some of these may be

rechargeable. Make sure that the battery being charged

is a rechargeable type and that the charger is intended

for the battery being charged.

When installing batteries, do not mix old batteries with

new, or with batteries of a different type. Batteries

MUST be installed correctly. Mismatches or incorrect

installation may result in overheating and battery case

rupture.

Warning: Do not attempt to disassemble or incinerate

any battery. Keep all batteries away from children.

Dispose of used batteries promptly and as regulated by

the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery dis-

posal information.

Disposal Notice: Should this product become

damaged beyond repair, or for some reason its useful

life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the

disposal of products that contain lead, batteries, plastics,

etc. If your dealer is unable to assist you, please contact

Yamaha directly.

NAMEPLATE LOCATION: The nameplate is

located on the bottom of the product. The model

number, serial number, power requirements, etc., are

located on this plate. You should record the model

number, serial number, and the date of purchase in the

spaces provided below and retain this manual as a

permanent record of your purchase.

Model Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

• This applies only to products distributed by Yamaha Canada Music Ltd.

• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.

CANADA

THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B” LIMITS FOR RADIO NOISE

EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF

THE CANADIAN DEPARTMENT OF COMMUNICATIONS.

LE PRESENT APPAREIL NUMERIQUE N’EMET PAS DE BRUITS RADIOELECTRIQUES DEPASSANT

LES LIMITES APPLICABLES AUX APPAREILS NUMERIQUES DE LA “CLASSE B” PRESCRITES DANS

LE REGLEMENT SUR LE BROUILLAGE RADIOELECTRIQUE EDICTE PAR LE MINISTERE DES COM-

MUNICATIONS DU CANADA.

FCC INFORMATION (U.S.A.)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC

requirements. Modifications not expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/or another product use only high-

quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC authorization to use this product in

the USA.

3. NOTE: This product has been tested and found to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a

reasonable level of assurance that your use of this product in a residential environment will not result

in harmful interference with other electronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in the user’s manual, may cause

interference harmful to the operation of other electronic devices. Compliance with FCC regulations

does not guarantee that interference will not occur in all installations. If this product is found to be the

source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm

ribbon lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer

authorized to distribute this type of product. If you cannot locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena

Park, CA 90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America

or its subsidiaries.

92-BP

Set up and Use

Personal Studio ST7

LINE OUT

AUX IN

DC10-12V

OFF ON

POWER

!3 !2

■ Top Panel

REHEARSAL ROOM

CONCERT HALL

CHURCH

REVERB MODE

AUX IN

PLAYER 2

PLAYER 1

REVERB

LEVEL

MASTER

VOLUME

■ Front Panel

PHONESPICKUP MUTE

12 12

The above illustration shows the standard settings

of each control.

AC Adaptor PA-1D

Insert the batteries as shown below.

Attaching the battery cover is easier if

you press down on the notched portion

(4 lines) and the claw simultaneously.

Belt hook

Claw

Power Supply

The Personal Studio ST7 can be operated with battery or AC power.

Always turn the power OFF when making AC power connections or replacing batteries.

Using a Power Adaptor

Please use the supplied power adaptor. *(adaptor not included in some countries)

1. Plug the DC output cable from the adaptor into the

DC10-12V jack q on the top panel. (See the Illus. above)

2. Plug the AC adaptor into a convenient wall AC power

socket.

When using an AC adaptor, use the supplied AC

adaptorPA-1D to power the ST7. The use of an

incompatible adaptor may result in irreparable

damage, or cause fire. The use of an incompatible

adaptor may also void the warranty. Please use

caution.

Using Batteries

Open the battery compartment, located on the back

panel of the ST7.

2. Insert six AAA size 1.5V batteries taking careful

note of the polarity markings as shown in the

illustration above.

Place the batteries on top of the ribbon for easy

removal at a later date.

3. Replace the battery compartment cover.

When the AC adaptor is connected, battery power

is automatically disconnected. However, poor

connection of the AC adaptor or power cable will

result in power being drawn from the batteries.

It is recommended that batteries be replaced early.

Run down batteries will result in the following:

1 Reverb does not function properly.

2 Earphone sound is unstable.

3 Noise becomes audible.

When one of these symptoms appears, take note of the

cautions below and replace the used batteries with a

complete set of new batteries.

● Make sure to follow polarity indications on the battery compartment

when replacing batteries. Improper insertion may result in fire.

● Always replace worn batteries with a complete set of new batteries. NEVER

mix old and new batteries! Do not mix different types of batteries (alkaline,

manganese), or batteries from different makers, or different battery types

by the same maker. Doing so may result in fire!

● To prevent possible damage to the unit due to battery leakage and

unnecessary power drain, remove the batteries from the unit if it is not to

be used for an extended period of time.

Don’t connect the end of the cable that is not equipped

with the lock nut to the mute. The cable may easily be

unplugged.

* PICKUP MUTE 1/2 Jacks

are specifically designed with

power supply and line signal for the Pickup Mute. Do not

connect any other equipment to the jacks.

When the power is switched ON, before connecting

the PICKUP MUTE Jack w and the Pickup Mute’s

OUTPUT Jack, turn the MASTER VOLUME u to its

lowest level. If the MASTER VOLUME level is not

lowered, a sudden burst of sound or noise will result

Before connecting the cable and attaching the mute, make sure the power is switched

OFF and the earphones are removed from your ears.

1. Connect the ST7 PICKUP MUTE 1 Jack w to the Pickup

Mute’s Output Jack with the supplied cable. A lock nut is

attached to one end of the cable. Securely attach the

lock nut end of the cable to the Pickup Mute’s Output

Jack, then tighten the lock nut.

Using the Silent Brass

which could lead to hearing impairments.

2. Slide the ST7’s ON/OFF Switch t to the ON position.

3. Connect the Stereo Earphones to the ST7’s PHONES 1

jack r, and make sure that the L and R sides of the

earphones are properly placed. (mP. 12)

* An optional pair of stereo earphones (or headphones) can

be connected to the

PHONES 2 jack

enabling a second

person to listen along.

4. Firmly insert the Pickup Mute into the bell of the

instrument.

5. Use the PLAYER 1 VOLUME y and the MASTER

VOLUME u to adjust the volume to a comfortable

playing level.

The PLAYER 1 VOLUME y controls the level of the

PICKUP MUTE 1 w Jack.

The MASTER VOLUME u controls the overall volume

of the ST7 (PLAYER 1 VOLUME y , PLAYER 2

VOLUME i and AUX IN VOLUME o) simultaneously.

(When the AUX IN VOLUME o is set to minimum, no

sound will be produced from equipment (CD player,

etc). connected to the AUX IN jacks !2).

For optimum use of the PLAYER 1

VOLUME y and PLAYER 2 VOLUME i

use the 3 o'clock position as a reference

(see illustration on the right).

* The PLAYER 2 VOLUME

controls the level of the PICKUP

MUTE 2 Input

. By connecting an optional Pickup Mute to

this jack, two people can play through the ST7 at the same

time.

Do not operate the ST7 at high volume levels when

using earphones (or headphones).

Doing so can lead to hearing impairments.

Make sure the Pickup Mute is firmly inserted into

the bell of the instrument before playing.

About the Reverb

The ST7’s internal processor includes 3 reverb types.

Reverb is added to the input signal received by the

PICKUP MUTE 1/2 w inputs.

1. Set the REVERB LEVEL Dial !0 to about the mid level

point.

2. Pressing the REVERB MODE button !11 will cause the

REVERB MODE to cycle through its 3 REVERB

MODES.

● REHEARSAL ROOM

Simulates the natural reverberation of a rehearsal

room.

● CONCERT HALL

Duplicates the longer reverberation time of a concert

hall.

● CHURCH (This setting gives the longest reverb time)

Simulates the natural reverberation of a church.

3. Turn the REVERB LEVEL control !0 to adjust the

amount of the reverb effect. Turn the control to the

right (clockwise) to increase the effect, turn the

control to the left (counter clockwise) to decrease

the effect. Set the REVERB LEVEL to a pleasing level

and try playing.

REHEARSAL ROOM

CONCERT HALL

CHURCH

REVERB MODE

REVERB

LEVEL

■ The AUX IN jack

The ST7’s AUX IN jack !2 can be used to connect an external

stereo signal source to the ST7. Connecting a CD player,

tape recorder, etc. to the AUX IN jack with an audio cable

allows you to play along with an external audio source.

The AUX IN jack’s !2 signal level is controlled by the AUX

IN VOLUME o control.

■ The LINE OUT Jack

The ST7’s LINE OUT jack !3 delivers the stereo signal of

the ST7 for connection to a stereo mixing console or tape

recorder for listening by external speakers or recording.

● Make sure that the power of the ST7 and any external

equipment is turned OFF before making any

connections. Also, set the volume of any external

audio sources to the minimum level before

connecting. A high volume setting could result in

damage to the equipment, hearing impairments or

electrical shock.

● The AUX OUT jack signal must never be returned to

the AUX IN jacks, either directly or through external

equipment. Doing so will result in the production of

feedback, and damage to the internal unit.

Using the AUX IN/LINE OUT Jacks

LINE OUT

AUX IN

OFF ON

POWER

!3 !2

DC10-12V

INPUT

OUTPUT

Tape recorder

Tuning Meter

Speakers Amplifier

Video

VCR

Silent Piano

Electronic Metronome

Tape recorder

CD Player

Stereo mini plug

For connection to a CD player,

etc. use a non-resistance

connection cable. If a resistance

type cable is used, the input signal

level (volume) is extremely low.

Please make sure of this point

when buying a connection cable.

Yamaha ST7 El manual del propietario

Marca: Yamaha

Modelo: ST7

Tipo: El manual del propietario

Yamaha ST7: un estudio personal para músicos que buscan mejorar su práctica y actuaciones.

El ST7 cuenta con una variedad de características que lo convierten en una herramienta ideal para músicos de todos los niveles. Estas características incluyen:

Descargar PDF

informe

En otros idiomas

français: Yamaha ST7 Le manuel du propriétaire
italiano: Yamaha ST7 Manuale del proprietario
English: Yamaha ST7 Owner's manual
Deutsch: Yamaha ST7 Bedienungsanleitung
русский: Yamaha ST7 Инструкция по применению
Nederlands: Yamaha ST7 de handleiding
português: Yamaha ST7 Manual do proprietário
dansk: Yamaha ST7 Brugervejledning
polski: Yamaha ST7 Instrukcja obsługi
čeština: Yamaha ST7 Návod k obsluze
svenska: Yamaha ST7 Bruksanvisning
suomi: Yamaha ST7 Omistajan opas
română: Yamaha ST7 Manualul proprietarului

Yamaha ST7 El manual del propietario

Yamaha ST7 El manual del propietario

En otros idiomas

Documentos relacionados