Spectrum Industries 55517B Guía de inicio rápido

Marca: Spectrum Industries

Modelo: 55517B

Tipo: Guía de inicio rápido

0191542R2 Page 1 of 10

Quickstart Guide

Guide de démarrage rapide

Guía de inicio rápido

55497

AV Credenza Slim™

Important

Before using this product:

• Read this manual

• Comply with all safety and operating instructions

• Ensure all parts and correct quantities are included

Important

Avant d’utiliser ce produit:

• Veillez à lire ce guide

• Respectez les consignes de sécurité et d’utilisation

• Vériez que vous disposez de toutes les pièces

nécessaires à l’installation

Importante

Antes de utilizar este producto:

• Lea este manual

• Cumpla con todas las instrucciones de prevención de

accidentes y operativas

• Revise que todas las partes y las cantidades correctas

estén incluidas

Any parts damaged during shipment must be reported within 5

days of receipt. To report information regarding missing parts or

damage, to purchase parts or accessories, or if you have any

questions, please contact us.

Thank you for purchasing Spectrum products!

Les pièces endommagées pendant le transport doivent faire

l’objet d’un rapport dans les 5 jours de leur réception. Veuillez

prendre contact avec nous si des pièces manquent ou sont

abîmées, si vous avez des questions, ou encore pour acheter

des pièces ou des accessoires.

Merci pour votre achat d’un produit Spectrum!

Si alguna parte se dañó durante el embarque, deberá reportarla

en un lapso de 5 días a partir de la recepción. Para reportar

cualquier información sobre partes faltantes o dañadas, para

adquirirlas o comprar accesorios, o bien, si tiene alguna duda,

póngase en contacto con nosotros.

¡Gracias por adquirir productos Spectrum!

Owner’s Manual

Le manuel du propriétaire

El manual del propietario

Video

Vidéo

Vídeo

Specs

Spécications

Especicaciones

800-235-1262

http://www.spectrumfurniture.com

0191542R2 Page 2 of 10

Display Stand Installation - optional

(2) 0146027

Upright bar

(1) 0145893

Display Stand

(1) 0119747

Fixed TV mount

(4) 052605

1/4-20 x 15mm

JC bolts

(2) 0119468

Recessed bumper

w/ 1/4” washer

(32) 0100167

8-32 x 1/2” PH thrd

cutting screws

(3) 021587

8-32 x 1/2” PHMS

(3) 021588

8-32 Keps nut

(2) 059534

1/4-20 x 30mm

JC bolt

(2) 059984

2” Grommet

(2) 0148399

Wall bracket

(2) 026436

#8 x 1-1/4” PHSM

screw

Components

Hardware

Note: Display stand may or may not be

included with your specic conguration.

0191542R2 Page 3 of 10

A. Install upright bars

8-32 x 1/2”

PHMS

8-32

Keps nut

8-32 Keps nut

(4, 6, or 8) 8-32 x 1/2”

PH thread cutting

screws

8-32 Keps nut

8-32 x 1/2”

PHMS

8-32 x 1/2”

PHMS

(4, 6, or 8) 8-32 x 1/2”

PH thread cutting

screws

Note: If installing the stand onto a 2-bay crendenza, it will be

necessary to remove the (4) screws shown from the credenza

frames before installing the upright bars. Figure 1.1.

2-Bay Credenzas only:

Remove

(4) screws

Upright bars

B. Install bumpers & grommets

2” Grommet

(2 req’d)

Recessed bumper

w/ 1/4” washer

(2 req’d)

Display stand

8-32 x 1/2” PH thrd

cutting screws

(2 req’d)

Note: (4, 6, or 8) 8-32 x 1/2” PHM screws may be used at each upright

bar attachment point-depending on bay conguration (1, 2, or 3-bay).

Be sure a minimum of (4) are used at each location.

0191542R2 Page 4 of 10

4mm

(8) 8-32 x 1/2”

PH thread cutting

screws

Display

panel

1/4-20 x 30mm

JC bolt

(2 per)

C. Install display stand D. Install mount & monitor

(8) 8-32 x 1/2”

PH thread cutting

screws

Note: See instructions included with

monitor mount for installation and setup.

(4) 1/4-20 x 15mm

JC bolts

4mm

Fixed TV

mount

E. Route wires

Display panel

0191542R2 Page 5 of 10

Install rack equipment

Fixed rack rail

Removable

rack cube

Attach left and right side trim

Side trim

0100167

8-32 x 1/2” PH thread

cutting screws

(4) 8-32 x 1/2” PH

thread cutting screws

Rack cube

support

(2) 8-32 x 1/2” PH

thread cutting screws

installed here

Side door

0191542R2 Page 6 of 10

Levelling credenza

Adjusting (levelling) doors

Floor

Wall

Glide

Door

Slot

0191542R2 Page 7 of 10

Note: Credenza must be anchored securely

to wall studs or a solid wall. Wood and

masonry screws are provided.

Secure credenza to wall

(6) 055699

1/4” x 1-1/4” Tapcon

hex slotted screw

(masonry use)

(6) 0101381

#14 x 1-3/4” PHSM

(wood or steel studs)

0100167

8-32 x 1/2” PH

thread cutting screws

Wall

bracket

(2) 8-32 x 1/2” PH

thread cutting screws

(2) #14 x 1-3/4”

PHSM screws

(2) 1/4 x 1-1/4”

Tapcon hex

slotted screws

1. Position the credenza at the preferred location along the wall.

2. Locate wall framing (studs).

3. Attach each wall bracket securely to the credenza with the mounting

holes centered at the wall stud locations. Multiple horizontal positions

and (3) sets of holes are available to locate each wall bracket on a stud.

4. Slide the credenza up to the wall so the wall brackets contact the

wall. Make sure the credenza is sitting level on the oor. If not sit-

ting level, the glides can be adjusted to level.

5. Using the brackets as a template, drill suitable holes in the wall for

the fasteners.

6. Secure each bracket to the wall with (2) wall fasteners.

Wall fasteners

Drill bit

Note: Display stand must be anchored securely

to wall studs or a solid wall. (2) #8 x 1-1/4”

PHSM screws are provided for wood use.

Install wall brackets on display stand

Wall fasteners

Display Stand

Wall bracket

w/ 3/16” slot

Wall

(2) 026436

#8 x 1-1/4” PHSM

screw

#8 x 1-1/4”

PHSM screw

(2 req’d)

0191542R2 Page 8 of 10

Accessories

Dual Display Mount - 55499

• Accommodates two monitors

up to 42” [106.7 cm]

• Includes (1) VESA display

mount

• Includes (2) support tubes

• Adjustable left-to-right

• Requires Display Stand 55498

3RU Fixed Rack - 55516

• Includes (2) 3RU rack rails

• Includes (2) mounting brackets

• Black powdercoat

Display Stand - 55498

• Mounts (1) monitor 37”-70”

[94-177.8 cm] diagonal

• Secured to worksurface and wall

• Cord grommets in wall panel

route and hide wires

• Slim VESA mount (non-tilting)

• Adjustable (VESA-compatible)

mount

Camera Mount - 55518

• Provides ability to

mount camera for video

teleconferencing

• Requires optional Display Stand

55498, or 55499

• Mounts above monitor(s) for

group teleconferencing

• Adjustable height shelf bracket

provides ideal height

Power Module - 99058

• (2) AC power receptacles

• (2) USB charge ports

• Aluminum housing and ange

• Thumbscrew clamps

• Requires worksurface cutout

• ETL-certied

• Available in black, silver, or white

• Customer-installed

EM Wireless Charging Pad - 99057

• Uses electromagnetic technology

to charge Qi V1.2 compliant IC

devices

("Qi" enabled)

• LED to conrm pairing /

charging

• Security tab prevents theft

• Requires 3” round cutout to be

made by customer

• UL-certied

3RU Rack Cube - 55517

• Provides ability to integrate

equipment remotely before

installation into the unit

• (1) rack cube can be installed

per bay

• Bumpers on two sides

• Cube can be oriented with

equipment horizontal or vertical

• Can be secured to base panel

• Black powdercoat

• Customer-installed See spectrumfurniture.com for the latest

accessories and detailed warranty information.

0191542R2 Page 9 of 10

Important Safety and Care Instructions

Consignes importantes de sécurité et d’entretien

Instrucciones importantes de prevención de accidentes y cuidado

• Lire ce guide d'utilisation avant l'assemblage ou l'utilisation.

• Interdire aux enfants de déplacer le lutrin.

• Déplacer le lutrin lentement et prudemment.

• Utilisation à l'intérieur uniquement. Ne pas assembler et ne pas ranger le lutrin

dans un endroit humide.

• Ne pas boucher les prises d'air de ventilation.

• Éviter le chargement mal réparti de l'équipement sur le lutrin. Un chargement mal

réparti risque de faire basculer le lutrin en déplacement.

• Interdire à quiconque de s'asseoir, de se tenir debout ou de grimper sur le lutrin.

• Passer un chiffon doux ou une éponge, imbibés de solution nettoyante ou de

savon liquide doux, sur les surfaces sales. Ne pas utiliser des solvants rudes ou

des abrasifs.

• Ce lutrin est destiné à un usage institutionnel. Il ne contient aucune pièce

susceptible d'être réparée par l'utilisateur et ne nécessite aucun entretien de la

part de celui-ci. Si une maintenance est requise, communiquer avec Spectrum

Industries pour obtenir de l'aide.

Consignes de sécurité en électricité

• Ne pas brancher le cordon d'alimentation sur une rallonge.

• Véri er que les cordons d'alimentation sont intacts avant chaque utilisation.

Ne pas les utiliser s'il sont abîmés.

• Pour débrancher le cordon de la prise murale, saisir son bouton isolant et

tirer; ne pas tirer le cordon.

• Ne pas marcher, ne pas rouler et ne pas placer des objets sur le cordon

d'alimentation; ne pas le traîner.

• Pour plus de sécurité, brancher le lutrin sur une prise mise à la terre protégée

par un disjoncteur de fuite de terre.

• Les appareils électriques ne sont pas des jouets. Les enfants n'ont souvent pas

conscience des dangers associés aux appareils électriques. Ce le lutrin doit

donc être toujours utilisé par un adulte, ou sous la surveillance d'un adulte.

Avertissement - Reloger un équipement audio ou vidéo sur un meuble non conçu

pour supporter cet équipement pourrait entraîner de graves blessures, voire la

mort, à la suite de l'effondrement du meuble ou de sa chute sur un enfant.

Avertissement - Un enfant qui grimpe sur un meuble d'équipement audio ou

vidéo pourrait subir des blessures graves ou mortelles. Une télécommande

ou des jouets placés sur le meuble risquent d'inciter un enfant à y grimper : le

meuble pourrait alors basculer et écraser l'enfant.

• Lea este manual del propietario antes de la instalación u operación.

• No permita que los niños muevan el atril.

• Proceda lenta y cuidadosamente al mover el atril.

• Solo para uso en interiores. No instale o guarde el atril donde quede expuesto a

la humedad.

• No obstruya las rendijas de ventilación.

• Evite cargar el equipo de forma desigual dentro del atril. La distribución asimétrica

del peso podría provocar que el atril se vuelque al momento de moverlo.

• No permita que nadie se siente, pare o suba al atril.

• Para limpiar las super cies sucias, utilice un paño, trapo suave o esponja con jabón

neutro o una solución de detergente. No utilice solventes o abrasivos ásperos.

• El uso convencional de este atril es institucional. No contiene ninguna parte

que pueda ser reparada por el usuario ni requiere de mantenimiento por parte

de éste. Si fuera necesario darle mantenimiento, póngase en contacto con

Spectrum Industries para obtener asistencia.

Prevención de accidentes eléctricos:

• No enchufe el cable de alimentación a un cable de extensión.

• Revise que los cables de alimentación no tengan ningún daño antes de cada

uso. No utilice cables de alimentación que estén dañados.

• Desenchufe el cable de alimentación del tomacorriente eléctrico sosteniendo

el cable  rmemente. No desenchufe el cable de alimentación jalando

únicamente del cable.

• No se pare, circule, jale o coloque ningún objeto sobre el cable de alimentación.

• Para mayor seguridad, enchufe el atril a una conexión a tierra controlada por

un interruptor de circuito GFI (interruptor de fallas de conexión a tierra).

• Los dispositivos eléctricos no son juguetes. Los niños generalmente no están

conscientes de los riesgos asociados con los dispositivos eléctricos. Este atril

lo deberán utilizar siempre personas adultas o bajo su supervisión.

Advertencia: reubicar equipo de audio y/o video a un mueble que no haya sido

diseñado especí camente para tal uso, puede provocar la muerte o lesiones

graves, debido a que puede colapsarse o volcarse sobre un niño.

Advertencia: existe peligro de muerte o lesiones graves si los niños se

suben a un mueble de equipo de audio y/o video. Un control remoto o juguete

colocado sobre el mueble puede alentar a un niño a subirse y tener como

resultado que el mueble se vuelque sobre el chico.

• Read these instructions before assembly or operation.

• Do not allow children to move the lectern.

• Proceed slowly and carefully when moving the lectern.

• For indoor use only. Do not install or store the lectern where it will be exposed

to moisture.

• Do not block the ventilation openings.

• Avoid uneven loading of the equipment into the lectern. Uneven weight

distribution could cause the lectern to tip when the lectern is moving.

• Do not allow anyone to sit, stand, or climb on the lectern.

• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution to clean

dirty surfaces. Do not use harsh solvents or abrasives.

• This lectern is intended for institutional use. It does not have any user-

serviceable parts or user-maintenance requirements. If servicing is necessary,

please contact Spectrum Industries for assistance.

Electrical Safety:

• Do not plug the power cord into an extension cord.

• Inspect power cords for damage before each use. Do not use power cords

that are damaged.

• Unplug power cord from electrical outlet by gripping the cord. Do not unplug

the power cord by pulling only on the cord.

• Do not step on, drive over, drag, or place objects on the power cord.

• For added safety, plug the lectern into a grounded outlet controlled by a GFI

(Ground Fault Interrupter) circuit breaker.

• Electrical devices are not toys. Children are often unaware of the hazards

associated with electrical devices. This lectern must always be used by

adults or with adult supervision.

Warning - Relocating audio and/or video equipment to furniture not speci cally

designed to support audio and/or video equipment may result in death or

serious injury due to the furnishing collapsing or over turning onto a child.

Warning - Death or serious injury may occur when children climb on audio

and/or video equipment furniture. A remote control or toys placed on the

furnishing may encourage a child to climb on the furnishing and as a result the

furnishing may tip over on to the child.

0191542R2 Page 10 of 10

We will make it right for you!

Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each

product is stringently monitored throughout the production process through our Quality Management System.

We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below

from the date of delivery. This warranty shall not apply to defects or damage resulting from normal wear and tear, misuse, or unintended use, failure to follow

instructions related to the product’s installation or intended use, abuse, neglect, improper care, modi cation or repair not authorized by Spectrum, or any other

cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.

This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer or Buyer third party

end user and to no other person or legal entity. No Spectrum dealer, distributor, partner, reseller, agent or employee is authorized to make any modi ca-

tion or addition to this warranty.

NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUI-

DATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER

UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT

ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARIS-

ING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH

RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.

Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls

Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: [email protected].

Item Warranty Period

Desk, table, cart and lectern chassis 10 Years

Electrical 2 Years

Flat panel monitor arms / gas spring / general parts 2 Years

Adjustable crank / electric legs and accessories 2 Years

Flat panel desk gas spring cylinders 2 Years

Height adjustable columns, lifts & accessories 2 Years

Casters & wheels 2 Years

Keyboard, mouse, trays 2 Years

Locks & keys 2 Years

Tubs, totes and other accessories 1 Year