Yamaha NS-P326 El manual del propietario

Categoría
Altavoces de la barra de sonido
Tipo
El manual del propietario
I
NS-P326
(NS-P326: NS-M104 + NS-E114 + NS-C104 + SW-P201)
HOME CINEMA 6.1CH SPEAKER PACKAGE
OWNER’S MANUAL
U B
NS-P326(UB)-PRE(3.6)d 02.3.6, 10:46 PM1
II
Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
IMPORTANT SAFETY INSTRUCTIONS
1 Read Instructions – All the safety and operating
instructions should be read before the product is
operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the product and in
the operating instructions should be adhered to.
4 Follow Instructions – All operating and use instructions
should be followed.
5 Cleaning – Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6 Attachments – Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
7 Water and Moisture – Do not use this product near
water – for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.
8 Accessories – Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and
serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of
the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
9 A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
10 Ventilation – Slots and openings in the
cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from
overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s
instructions have been adhered to.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
IMPORTANT
Please record the serial number of this system in the
space below.
Model:
Serial No.:
The serial number is located on the rear of the main
unit.
Retain this Owners Manual in a safe place for future
reference.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
11 Power Sources This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12 Grounding or Polarization This product may be
equipped with a polarized alternating current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13 Power-Cord Protection Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
14 Lightning For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning
and power-line surges.
15 Power Lines An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
16 Overloading Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17 Object and Liquid Entry Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
NS-P326(UB)-PRE(3.6)d 02.3.6, 10:47 PM2
III
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Associations
Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying
blaring or distortion and, most importantly, without
affecting your sensitive hearing.
Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA
and the Electronic Industries Associations
Consumer Electronics Group recommend you
to avoid prolonged exposure from excessive
volume levels.
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE : DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved
by Yamaha may void your authority, granted by the
FCC, to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation
instructions. Failure to follow instructions could void
your FCC authorization to use this product in the
USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC
Regulations, Part 15 for Class B digital devices.
Compliance with these requirements provides a
reasonable level of assurance that your use of this
product in a residential environment will not result in
harmful interference with other electronic devices.
This equipment generates/uses radio frequencies
and, if not installed and used according to the
instructions found in the users manual, may cause
interference harmful to the operation of other
electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this
product is found to be the source of interference, which
can be determined by turning the unit OFF and ON,
please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
18 Servicing Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
19 Damage Requiring Service Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
20 Replacement Parts When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21 Safety Check Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
22 Wall or Ceiling Mounting The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
23 Heat The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
NS-P326(UB)-PRE(3.6)d 02.3.6, 10:47 PM3
IV
UNPACKING After unpacking, check that the following items are contained.
Main speakers
Rear/rear center speakers
Center speaker
<NS-M104>
<NS-C104>
<SW-P201>
<NS-E114>
X 4
[4m]
[15m]
Subwoofer
Subwoofer cable
Speaker cables
Fasteners
Pads
X 3
X 3
NS-P326(UB)-PRE(3.6)d 02.3.6, 10:47 PM4
English
E-1
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install the speakers in a cool, dry, clean place away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the speakers to rain or water.
To prevent the enclosure from warping or discoloring, do
not place the speakers where they will be exposed to
direct sunlight or excessive humidity.
Do not place the following objects on the speakers:
Glass, china, etc.
If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
If the vessel falls by vibrations and water spills, it may
cause damage to the speakers, and/or you may get an
electric shock.
Do not place the speakers where foreign objects such as
water drips might fall. It might cause a fire, damage to
the speakers, and/or personal injury.
Do not place the speakers where they are liable to be
knocked over or struck by falling objects. Stable
placement will also ensure better sound performance.
Placing the speakers on the same shelf or rack as the
turntable can result in feedback.
Any time you note distortion, reduce the volume control
on your amplifier to a lower setting. Never allow your
amplifier to be driven into clipping. Otherwise the
speakers may be damaged.
When using an amplifier with a rated output power higher
than the nominal input power of the speakers, care should
be taken never to exceed the speakers maximum input.
As these speakers contain strong magnets (though all of
them are magnetically shielded types), avoid placing
watches, magnetic tapes, etc. near them. Also, placing
the speakers near a TV set may impair picture color. If
this happens, move the speakers away from the TV set.
Do not attempt to clean the speakers with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
Secure placement or installation is the owners
responsibility.
YAMAHA shall not be liable for any accident caused
by improper placement or installation of speakers.
For SW-P201 only
Never open the cabinet. If something drops into the set,
contact your dealer.
Do not use force on switches, controls or connection
wires. When moving the unit, first disconnect the power
plug and the wires connected to other equipments.
Never pull the wires themselves.
Be sure to read the TROUBLESHOOTING section
regarding common operating errors before concluding
that the unit is faulty.
CAUTION: Read this before operating your unit.
Thank you for selecting this YAMAHA NS-P326 Speaker Package.
When not planning to use this unit for a long period (ie.,
vacation, etc.), disconnect the AC power plug from the
wall outlet.
To prevent lightning damage, disconnect the AC power
plug when there is an electric storm.
Since this unit has a built-in power amplifier, heat will
radiate from the rear panel. Place the unit apart from the
walls, allowing enough space above, behind and on the
both sides of the unit to prevent fire or damage.
Furthermore, do not position with the rear panel facing
down on the floor or other surfaces.
<For U.K. and Europe models only>
Be sure to allow a space of at least 20 cm above, behind
and on both sides of the unit.
Super-bass frequencies reproduced by this unit may
cause a turntable to generate a howling sound. In such a
case, move this unit away from the turntable.
If you hear distorted noise (i.e., unnatural, intermittent
rapping or hammering sounds) coming from this unit,
reduce the volume level. Extremely loud playing of a
movie soundtracks low frequency, bass-heavy sounds or
similarly loud popular music passages can damage this
speaker system.
VOLTAGE SELECTOR
(General model only)
The VOLTAGE SELECTOR on the
rear panel of this unit must be set
for your local main voltage
BEFORE plugging into the AC
main supply.
Voltages are 110-120/220-240 V
AC, 50/60 Hz.
Standby mode
If the POWER switch is set to the ON position and the
AUTO STANDBY switch is set to the HIGH or LOW
position, this unit turns into the standby mode when no
signal is inputted to this unit.
In this state, this unit is designed to consume a very
small quantity of power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
VOLTAGE
SELECTOR
220V-240V
110V-120V
For Canadian Customers
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM1
E-2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ........ II
UNPACKING .................................................. IV
CAUTION ......................................................... 1
COMPONENTS OF THE PACKAGE .............. 2
SETTING UP THE SPEAKERS ...................... 3
Placing the subwoofer ................................... 3
Placing the center speaker ............................. 4
Mounting the rear and rear center speakers ..... 5
CONNECTIONS.............................................. 6
An example of basic connections .................... 6
How to connect speaker cables to the input
and output terminals of the speakers ............... 8
Connecting the subwoofer to speaker output
terminals of the amplifier
................................ 9
USING THE SUBWOOFER (SW-P201)........ 10
Controls and their functions .......................... 10
Adjusting the subwoofer before use ................ 11
ADVANCED YAMAHA ACTIVE SERVO
TECHNOLOGY (for SW-P201) .................... 12
TROUBLESHOOTING .................................. 13
SPECIFICATIONS ........................................ 14
COMPONENTS OF THE PACKAGE
<NS-M104>
2-way bass-reflex speaker system used for the main
speakers
<NS-C104>
2-way bass-reflex speaker system used for the center
speaker
<NS-E114>
2-way bass-reflex speaker system used for the rear and
rear center speakers
<SW-P201>
Active Servo Processing Subwoofer System with a
built-in power amplifier
This subwoofer system employs Advanced YAMAHA
Active Servo Technology which YAMAHA has developed
for reproducing higher quality super-bass sound. (Refer to
page 12 for details on Advanced YAMAHA Active Servo
Technology.) This super-bass sound adds a more
realistic, theater-in-the-home effect to your stereo system.
This subwoofer can be easily added to your existing
audio system by connecting to either the speaker
terminals or the line output (pin jack) terminals of the
amplifier.
The AUTO STANDBY switch saves you the trouble of
setting the POWER switch to the ON or OFF position.
The speaker package NS-P326 is designed for use in a
multi-channel audio system such as a home theater system.
The package includes two NS-M104 speaker systems,
three NS-E114 speaker systems, one NS-C104 speaker
system and one SW-P201 subwoofer system.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to
the terminal which is marked with the letter N or coloured
BLACK. The wire which is coloured BROWN must be
connected to the terminal which is marked with the letter L
or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM2
English
E-3
Placing the subwoofer
It is recommended to place the subwoofer on the outside of
either the right or the left main speaker. (See fig. Å .) The
placement shown in fig. ı is also possible, however, if the
subwoofer system is placed directly facing the wall, the
bass effect may die because the sound from it and the
sound reflected by the wall may cancel out each other. To
prevent this from happening, face the subwoofer system at
an angle as shown in fig. Å.
Note
There may be a case that you cannot obtain enough super-
bass sounds from the subwoofer when listening in the
center of the room. This is because standing waves have
been developed between two parallel walls and they cancel
the bass sounds.
In such a case, face the subwoofer obliquely to the wall. It
also may be necessary to break up the parallel surfaces by
placing bookshelves etc. along the walls.
( : Subwoofer, : Main speaker)
ı
Å
SETTING UP THE SPEAKERS
Before making connections, place all speakers in their respective positions. The positioning of the speakers is important
because it controls the whole sound quality of this system.
Place the speakers depending on your listening position by following the instructions below.
Speaker configuration
This speaker package employs a 7 speaker configuration: 2
main speakers, 2 rear speakers, a center speaker, a rear
center speaker and a subwoofer.
The main speakers are used for main source sound. The
rear and rear center speakers are used for surround
sounds, and the center speaker is for center sounds (dialog
etc.). The subwoofer is for reinforcing low frequencies on
your audio system.
Placing speakers
Main speakers: On both sides of and at approximately
the same height as the TV set.
Rear speakers: Behind your listening position, facing
slightly inward. About 1.8 m (approx. 6
feet) from the floor.
Center speaker: Precisely between the main speakers.
Rear center speaker:
Precisely between the rear speakers.
Subwoofer: The position of the subwoofer is not so
critical because low bass tones are not
highly directional.
Refer to Placing the subwoofer below
for a recommended positioning of the
subwoofer.
Main L Center Main R
Rear L
Subwoofer
Rear R
Main L
Main R
Subwoofer
Center
Rear L
Rear R
TV-set
Rear center
Rear center
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM3
E-4
Place the speaker on TV whose top is flat or on the floor
under the TV or inside the TV rack so that it is stabilized.
When placing the speaker on top of the TV, to prevent the
speaker from falling down, put the provided fasteners at four
points on the bottom of the speaker and the top of the TV.
Placing the center speaker
The screw holes (at an interval of 60 mm) on the
bottom and the rear of the speaker can be used to
mount the speaker on a speaker stand.
* Those screw holes can be used with M4 screws
only.
If you want to mount a speaker on a commercially available speaker stand
(for the main/rear/rear center speakers)
60 mm
Notes
Do not place the speaker on top of the TV whose
area is smaller than the bottom area of the speaker.
If placed, the speaker may drop out causing an
injury to you.
Do not place the speaker on top of the TV with an
inclination.
Do not touch the adhesive surface after peeling off
the seal as this will weaken its adhesive strength.
Thoroughly wipe clean the surface where the
fastener is to be applied. Note that adhesive strength
is weakened if the surface is dirty, oily or wet and
that this may cause the center speaker to drop.
Screen
Peel off
the seal
Fastener
60 mm
Main speaker
(bottom)
Rear/rear center
speaker
(bottom)
60 mm
60 mm
Main speaker
(rear)
Rear/rear center
speaker
(rear)
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM4
English
E-5
Mount the rear and rear center speakers on a shelf, rack or
directly on the floor, or hang them on the wall.
To mount the rear and rear center
speakers on a wall by using the holes
on the speakers back panels
1 Put the provided pads at the four corners on the rear of
the rear and rear center speakers to prevent the rear
and rear center speakers from moving by vibrations.
2 Fasten screws into a firm wall or wall support as shown
in the figure.
3 Hang the holes on the protruding screws.
* Make sure that the screws are securely caught by the
narrow parts of the holes.
* You can use the lower holes on the rear of the rear
speakers.
WARNING
Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not
mount them on thin plywood or a wall with soft
surface material. If mounted, the screws may come
out of the flimsy surface and the speakers may fall.
This damages the speakers or causes personal
injury.
Do not install the speakers to a wall with nails,
adhesives, or any other unstable hardware. Long-
term use and vibrations may cause them to fall.
To avoid accidents resulting from tripping over loose
speaker cables, fix them to the wall.
Select a proper position on the wall to mount the
speaker so that no one will injure his/her head or
face.
Mounting the rear and rear center speakers
1
3
Wall/ wall
support
Tapping screw
(Available at the
hardware store)
Min.
20 mm
60 mm
Diam. 3.5 to 4 mm
6 mm
Holes
2
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM5
E-6
SPEAKERS
MAIN
OUTPUT
SUB
WOOFER
CENTER
REAR CENTER
L
R
L
R
L
R
A
+
+
+
+
+
B
REAR
(SURROUND)
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
INPUT2
/MONO
CONNECTIONS
Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
An example of basic connections
LeftRight
Subwoofer
Amplifier
To AC outlet
Center speaker
Main speakers
LeftRight
Rear speakers
Rear center speaker
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM6
English
E-7
Connect the main, center, rear and rear center speakers
to the speaker output terminals of your amplifier with the
provided speaker cables.
* Connect each speaker making sure not to reverse the
polarity (+, ). If the speaker is connected with
reversed polarity, the sound will be unnatural and lack
bass.
* For the main and rear speakers only, connect one
speaker to the left (marked L) terminals of your
amplifier, and another speaker to the right (marked R)
terminals.
Basically, connect the subwoofer to the line output (pin
jack) terminal(s) of the amplifier. If your amplifier does
not have any line output terminal, connect the subwoofer
to the speaker output terminals of the amplifier. (Refer to
page 9 for details.)
* To connect with a YAMAHA DSP amplifier (or AV
receiver), connect the SUBWOOFER (or LOW PASS
etc.) terminal on the rear of the DSP amplifier (or AV
receiver) to the L/MONO INPUT2 terminal of the
subwoofer.
* To connect the subwoofer to the SPLIT SUBWOOFER
terminals on the rear of the DSP amplifier, connect
them to both the left L and right R INPUT2 terminals
of the subwoofer.
Note
When connecting to a monaural line output terminal of the
amplifier, connect to the L/MONO INPUT2 terminal.
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM7
E-8
Main/center/rear/rear center speakers
One side of the provided speaker cable has a white broken
line and the other side has no line.
Connect the (+) terminals on both the speaker and the
amplifier using the side with a white broken line. Connect
the () terminals on both components using the side with no
line.
For NS-M104 (main speaker)
Red: positive (+)
Black: negative ()
For NS-E114 (rear/rear center speaker) and NS-C104
(center speaker)
Red: positive (+)
Black: negative ()
Subwoofers INPUT1/OUTPUT terminals
Connect the (+) terminals on both the subwoofer and the
amplifier using one side of the cable. Connect the ()
terminals on both components using the other side of the
cable.
Red: positive (+)
Black: negative ()
How to connect speaker cables to the input and output terminals
of the speakers
For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the
connections are faulty, no sound will be heard from the speakers.
Before connecting
Remove the insulation coating at the extremity of each
speaker cable by twisting the coating off.
How to connect:
For NS-M104 (main speaker)
1 Loosen the knob, as shown in the figure.
2 Insert the bare wire.
3 Tighten the knob and secure the cable.
Test the firmness of the connection by pulling lightly on the
cable at the terminal.
For NS-E114 (rear/rear center speaker), NS-C104 (center
speaker) and subwoofers INPUT1/OUTPUT terminals
1 Press and hold the terminals tab, as shown in the
figure.
2 Insert the bare wire.
3 Release your finger from the tab and secure the cable.
Test the firmness of the connection by pulling lightly on the
cable at the terminal.
Note
Do not let the bare speaker wires touch each other as
this could damage the speaker or the amplifier, or both
of them.
White broken line
1
2
3
White broken line
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM8
English
E-9
AB
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
/MONO
VOLUME
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
0I0
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
Connecting the subwoofer to speaker output terminals of the
amplifier
If your amplifier has only one set of main speaker output terminals
Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT
terminals of the subwoofer to the main speakers.
Left main
speaker
Right main
speaker
Subwoofer
Amplifier
Speaker
output
terminals
To AC outlet
If your amplifier has two sets of speaker output terminals
(Both A and B speaker outputs
must be ON.)
Subwoofer
Amplifier
Speaker output terminals
To AC outlet
Left main
speaker
Right main
speaker
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM9
E-10
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
/MONO
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
1
VOLUME
0I0
OFF
POWER
ON
5
6
4
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
/MONO
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
VOLUME
0I0
2
3
7
VOLTAGE
SELECTOR
220V-240V
110V-120V
VOLTAGE
SELECTOR
220V-240V
110V-120V
8
USING THE SUBWOOFER (SW-P201)
1 POWER switch
Set this switch to the ON position to turn on the power
of the subwoofer. When the power of the subwoofer is
on, the power indicator (2) below the POWER switch
lights up GREEN. Set this switch to the OFF position
to turn off the power of the subwoofer.
2 Power indicator
Lights up GREEN when the POWER switch is set to
the ON position and goes off when set to the OFF
position.
* Standby mode
If the POWER switch is set to the ON position and
the AUTO STANDBY switch is set to the HIGH or
LOW position, this indicator lights up RED when no
signal is inputted to the subwoofer.
3 AUTO STANDBY (HIGH/LOW/OFF) switch
By setting this switch to the HIGH or LOW position, the
subwoofers automatic power-switching function
operates as described on the next page. If you do not
need this function, set to the OFF position.
* Make sure to change the setting of this switch only
when the POWER switch (1) is in the OFF
position.
Standby mode
The subwoofer is still using a small amount of power
in this mode.
4 INPUT2 terminals
Used to input line level signals from the amplifier.
5 INPUT1 (FROM AMPLIFIER) terminals
Used to connect the subwoofer with the speaker
terminals of the amplifier.
6 OUTPUT (TO SPEAKERS) terminals
Can be used for connecting to the main speakers.
Signals from the INPUT1 terminals (5) are sent to
these terminals.
7 VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.
8 VOLTAGE SELECTOR switch (General model only)
If the preset setting of the switch is incorrect, set the
switch to the proper voltage range (220V-240V or
110V-120V) of your area.
Consult your dealer if you are unsure of the correct
setting.
WARNING
Be sure to unplug the subwoofer before setting the
VOLTAGE SELECTOR switch correctly.
Rear panel
Controls and their functions
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM10
English
E-11
1 Set the VOLUME control to minimum (0).
2 Turn on the power of all the other
components.
3 Set the POWER switch to the ON position.
* The power indicator lights up in green.
4 Play a source and adjust the amplifiers
volume control to the desired listening level.
Adjusting the subwoofer before use
Before using the subwoofer, adjust the subwoofer to obtain the optimum volume balance between the subwoofer and the main
speakers by following the procedures described below.
Rear panel
5 Increase the volume gradually to adjust the
volume balance between the subwoofer and
the main speakers.
Note: It is recommended to set the
VOLUME control to the middle
position when using all the
speakers of this package in a 6.1-
channel home theater system.
Once the volume balance between the subwoofer and
the main speakers is adjusted, you can adjust the
volume of your whole sound system by using the
amplifiers volume control.
However, if you change the main speakers NS-M104 to
others, you must make this adjustment again.
INPUT1
FROM AMPLIFIER
OUTPUT
TO SPEAKERS
INPUT2
/MONO
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
OFF
POWER
ON
3
VOLUME
0I0
OFF
POWER
ON
AUTO
STANDBY
STANDBY-RED
ON-GREEN
OFF
LOW
HIGH
VOLUME
0I0
1, 5
VOLUME
0I0
Automatic power-switching function
If the source being played is stopped and the input signal is
cut off for 7 to 8 minutes, the subwoofer automatically
switches to the standby mode. (When the subwoofer
switches to the standby mode, the power indicator lights up
in red.)
When you play a source again, the power of the subwoofer
turns on automatically by sensing audio signals input to the
subwoofer.
This function operates by sensing a certain level of low
frequency input signal. Usually set the AUTO STANDBY
switch to the LOW position. However, if the power is not
switched to ON or STANDBY smoothly, set the switch to the
HIGH position. In the HIGH position, the power will turn on
even with a low level of input signal. But please be aware
that the subwoofer may not switch to the standby mode
when there is an extremely low input signal.
* The power might turn on unexpectedly by sensing noise
from other appliances. If that occurs, set the AUTO
STANDBY switch to the OFF position and use the
POWER switch to switch the power between ON and
OFF manually.
* This function detects the low-frequency components
below 200 Hz of the input signals (i.e., the explosion in
the action movie, the sound of the bass guitar or the
bass drum, etc.).
* The minutes required to switch the subwoofer to the
standby mode might change by sensing noise from
other appliances.
This function is available only when the power of the
subwoofer is on (by setting the POWER switch (1) to
ON).
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM11
E-12
ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY
(for SW-P201)
The theory of Yamaha Active Servo Technology has been
based upon two major factors, the Helmholtz resonator and
negative-impedance drive. Active Servo Processing
speakers reproduce the bass frequencies through an air
woofer, which is a port or opening in the speakers cabinet.
This opening is used instead of, and performs the functions
of, a woofer in a conventionally designed speaker system.
Thus, signals of low amplitude within the cabinet can,
according to the Helmholtz resonance theory, be outputted
from this opening as waves of great amplitude if the size of
the opening and the volume of the cabinet are in the correct
proportion to satisfy a certain ratio.
In order to accomplish this, moreover, the amplitudes within
the cabinet must be both precise and of sufficient power
because these amplitudes must overcome the load
presented by the air that exists within the cabinet.
Thus it is this problem that is resolved through the
employment of a new design in which the amplifier supplies
special signals. If the electrical resistance of the voice coil
could be reduced to zero, the movement of the speaker unit
would become linear with respect to signal voltage. To
accomplish this, a special negative-impedance output-drive
amplifier for subtracting output impedance of the amplifier is
used.
By employing negative-impedance drive circuits, the
amplifier is able to generate precise, low-amplitude, low-
frequency waves with superior damping characteristics.
These waves are then radiated from the cabinet opening as
high-amplitude signals. The system can, therefore, by
employing the negative-impedance output drive amplifier
and a speaker cabinet with the Helmholtz resonator,
reproduce an extremely wide range of frequencies with
amazing sound quality and less distortion.
The features described above, then, are combined to be the
fundamental structure of the conventional Yamaha Active
Servo Technology.
Our new Active Servo Technology Advanced Yamaha
Active Servo Technology adopted Advanced Negative
Impedance Converter (ANIC) circuits, which allows the
conventional negative impedance converter to dynamically
vary in order to select an optimum value for speaker
impedance variation. With this new ANIC circuits, Advanced
Yamaha Active Servo Technology can provide more stable
performance and improved sound pressure compared with
the conventional Yamaha Active Servo Technology, resulting
in more natural and dynamic bass reproduction.
High-amplitude
bass sound
Cabinet
Port
Air woofer
(Helmholtz resonator)
Active Servo
Processing
Amplifier
Signals
Signals of low amplitude
Advanced Negative-
impedance Converter
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM12
English
E-13
Problem
Power is not supplied even
though the POWER switch is set
to the ON position.
No sound.
Sound level is too low.
The subwoofer does not turn on
automatically.
The subwoofer does not turn into
the standby mode automatically.
The subwoofer turns into the
standby mode unexpectedly.
The subwoofer turns on
unexpectedly.
What to Do
Connect it securely.
Turn the VOLUME control to the right.
Connect them securely.
Connect them correctly, that is L (left) to
L, R (right) to R, + to + and “–” to “–”.
Play a source sound with bass
frequencies.
Reposition the subwoofer or break up
the parallel surface by placing
bookshelves etc. along the walls.
Set the POWER switch to the ON
position.
Set the AUTO STANDBY switch to the
HIGH or LOW position.
Set the AUTO STANDBY switch to the
HIGH position.
Move the subwoofer farther away from
such appliances and/or reposition the
connected speaker cables.
Otherwise, set the AUTO STANDBY
switch to the OFF position.
Set the AUTO STANDBY switch to the
HIGH or LOW position.
Set the AUTO STANDBY switch to the
HIGH position.
Move the subwoofer farther away from
such appliances and/or reposition the
connected speaker cables.
Otherwise, set the AUTO STANDBY
switch to the OFF position.
Cause
The power plug is not securely
connected.
The VOLUME control is set to 0.
Speaker cables are not connected
securely.
Speaker cables are not connected
correctly.
A source sound with few bass
frequencies is played.
It is influenced by standing waves.
The POWER switch is set to the OFF
position.
The AUTO STANDBY switch is set to
the OFF position.
The level of input signal is too low.
There is an influence of noise
generated from external appliances etc.
The AUTO STANDBY switch is set to
the OFF position.
The level of input signal is too low.
There is an influence of noise
generated from external appliances etc.
TROUBLESHOOTING
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if
the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service
center.
Problem
No sound.
Sound level is too low.
What to Do
Connect them securely.
Connect them correctly, that is L (left) to
L, R (right) to R, + to + and “–” to “–”.
Cause
Speaker cables are not connected
securely.
Speaker cables are not connected
correctly.
For SW-P201
NS-P326 UB(02.3.6)a 02.3.6, 10:47 PM13
E-14
SPECIFICATIONS
NS-M104
Type .............................. 2-way bass-reflex speaker system
Magnetic shielding type
Driver .............................................. 12 cm (5”) cone woofer
2.5 cm (1”) balanced dome tweeter
Impedance ..................................................................... 6
Frequency Response ............................... 65 Hz to 28 kHz
Nominal Input Power .................................................. 50W
Maximum Input Power .............................................. 160W
Sensitivity ................................................... 89 dB/2.83V/m
Crossover Frequency ............................................... 5 kHz
Dimensions (W x H x D) .................... 140 x 300 x 167 mm
(5-1/2” x 11-13/16” x 6-9/16”)
Weight ............................................. 1.9 kg (4 lbs. 3 oz.) x 2
NS-C104
Type ............................... 2-way bass-reflex speaker system
Magnetic shielding type
Driver .......................................... 7 cm (3”) cone woofer x 3
1.5 cm (5/8”) tweeter
Impedance ..................................................................... 6
Frequency Response ............................... 95 Hz to 20 kHz
Nominal Input Power .................................................. 70W
Maximum Input Power .............................................. 180W
Sensitivity ................................................... 91 dB/2.83V/m
Dimensions (W x H x D) ...................... 440 x 85 x 122 mm
(17-5/16” x 3-5/16” x 4-13/16”)
Weight ................................................. 1.7 kg (3 lbs. 11 oz.)
NS-E114
Type ............................... 2-way bass-reflex speaker system
Magnetic shielding type
Driver .............................................. 10 cm (4”) cone woofer
1.9 cm (3/4”) balanced dome tweeter
Impedance ..................................................................... 6
Frequency Response ............................. 110 Hz to 27 kHz
Nominal Input Power .................................................. 30W
Maximum Input Power .............................................. 110W
Sensitivity ................................................... 91 dB/2.83V/m
Crossover Frequency ............................................. 14 kHz
Dimensions (W x H x D) ...................... 120 x 250 x 92 mm
(4-3/4” x 9-13/16” x 3-5/8”)
Weight ............................................. 1.1 kg (2 lbs. 6 oz.) x 3
SW-P201
Type ............... Advanced Yamaha Active Servo Technology
Driver ...................................... 16 cm (6-5/16”) cone woofer
Magnetic shielding type
Amplifier Output .................................................... 50W/5
Frequency Response ............................... 30 Hz to 200 Hz
Power Supply
USA and Canada models ....................... AC 120V, 60 Hz
U.K. and Europe models ........................ AC 230V, 50 Hz
Australia model ....................................... AC 240V, 50 Hz
General model .............. AC 110-120/220-240V, 50/60 Hz
Power Consumption ................................................... 42W
(In the standby mode: 6W)
Dimensions (W x H x D) .................... 200 x 395 x 384 mm
(7-7/8” x 15-9/16” x 15-1/8”)
Weight ................................................. 9.3 kg (20 lbs. 7 oz.)
Accessories
Subwoofer cable x 1
Speaker cable (4 m) x 3
Speaker cable (15 m) x 3
Fastener x 4
Pad x 12
* Specifications are subject to change without notice due
to product improvements.
NS-P326 UB(02.3.6)a 02.3.6, 11:06 PM14
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
V935890
Printed in China
NS-P326 UB(02.3.6)a 02.3.6, 11:07 PM16

Transcripción de documentos

UB NS-P326 (NS-P326: NS-M104 + NS-E114 + NS-C104 + SW-P201) HOME CINEMA 6.1CH SPEAKER PACKAGE OWNER’S MANUAL NS-P326(UB)-PRE(3.6)d 1 02.3.6, 10:46 PM I • Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT Please record the serial number of this system in the space below. Model: Serial No.: WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The serial number is located on the rear of the main unit. Retain this Owner’s Manual in a safe place for future reference. IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 9 10 II Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. Follow Instructions – All operating and use instructions should be followed. Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards. Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. NS-P326(UB)-PRE(3.6)d 2 11 12 13 14 15 16 17 Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization – This product may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 02.3.6, 10:47 PM 18 19 Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the power-supply cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation, e) If the product has been dropped or damaged in any way, and f) When the product exhibits a distinct change in performance - this indicates a need for service. 20 21 22 23 Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. FCC INFORMATION (for US customers only) 1. 2. 3. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. III NS-P326(UB)-PRE(3.6)d 3 02.3.6, 10:47 PM UNPACKING After unpacking, check that the following items are contained. Main speakers Subwoofer <NS-M104> <SW-P201> Rear/rear center speakers Subwoofer cable <NS-E114> Speaker cables [4m] [15m] X3 X3 Fasteners Center speaker X4 <NS-C104> Pads IV NS-P326(UB)-PRE(3.6)d 4 02.3.6, 10:47 PM English Thank you for selecting this YAMAHA NS-P326 Speaker Package. CAUTION: Read this before operating your unit. ● ● ● ● ● To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install the speakers in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, motors). To prevent fire or electrical shock, do not expose the speakers to rain or water. ● ● ● ● ● ● ● To prevent the enclosure from warping or discoloring, do not place the speakers where they will be exposed to direct sunlight or excessive humidity. Do not place the following objects on the speakers: Glass, china, etc. If glass etc. falls by vibrations and breaks, it may cause personal injury. A burning candle etc. If the candle falls by vibrations, it may cause fire and personal injury. A vessel with water in it If the vessel falls by vibrations and water spills, it may cause damage to the speakers, and/or you may get an electric shock. Do not place the speakers where foreign objects such as water drips might fall. It might cause a fire, damage to the speakers, and/or personal injury. ● Do not place the speakers where they are liable to be ● ● knocked over or struck by falling objects. Stable placement will also ensure better sound performance. Placing the speakers on the same shelf or rack as the turntable can result in feedback. Any time you note distortion, reduce the volume control on your amplifier to a lower setting. Never allow your amplifier to be driven into “clipping”. Otherwise the speakers may be damaged. When using an amplifier with a rated output power higher than the nominal input power of the speakers, care should be taken never to exceed the speakers’ maximum input. As these speakers contain strong magnets (though all of them are magnetically shielded types), avoid placing watches, magnetic tapes, etc. near them. Also, placing the speakers near a TV set may impair picture color. If this happens, move the speakers away from the TV set. Do not attempt to clean the speakers with chemical solvents as this might damage the finish. Use a clean, dry cloth. Secure placement or installation is the owner’s responsibility. YAMAHA shall not be liable for any accident caused by improper placement or installation of speakers. ● ● ● When not planning to use this unit for a long period (ie., vacation, etc.), disconnect the AC power plug from the wall outlet. To prevent lightning damage, disconnect the AC power plug when there is an electric storm. Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Place the unit apart from the walls, allowing enough space above, behind and on the both sides of the unit to prevent fire or damage. Furthermore, do not position with the rear panel facing down on the floor or other surfaces. <For U.K. and Europe models only> Be sure to allow a space of at least 20 cm above, behind and on both sides of the unit. Super-bass frequencies reproduced by this unit may cause a turntable to generate a howling sound. In such a case, move this unit away from the turntable. If you hear distorted noise (i.e., unnatural, intermittent “rapping” or “hammering” sounds) coming from this unit, reduce the volume level. Extremely loud playing of a movie soundtrack’s low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system. VOLTAGE VOLTAGE SELECTOR (General model only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply. Voltages are 110-120/220-240 V AC, 50/60 Hz. SELECTOR 220V-240V 110V-120V Standby mode If the POWER switch is set to the ON position and the AUTO STANDBY switch is set to the HIGH or LOW position, this unit turns into the standby mode when no signal is inputted to this unit. In this state, this unit is designed to consume a very small quantity of power. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. For SW-P201 only ● ● ● Never open the cabinet. If something drops into the set, contact your dealer. Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipments. Never pull the wires themselves. For Canadian Customers To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES-003. Be sure to read the “TROUBLESHOOTING” section regarding common operating errors before concluding that the unit is faulty. E-1 NS-P326 UB(02.3.6)a 1 02.3.6, 10:47 PM For U.K. customers SPECIAL INSTRUCTIONS FOR U.K. MODEL If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet. IMPORTANT: THE WIRES IN MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: Blue: NEUTRAL Brown: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug. COMPONENTS OF THE PACKAGE The speaker package “NS-P326” is designed for use in a multi-channel audio system such as a home theater system. The package includes two NS-M104 speaker systems, three NS-E114 speaker systems, one NS-C104 speaker system and one SW-P201 subwoofer system. <NS-M104> 2-way bass-reflex speaker system used for the main speakers <NS-C104> 2-way bass-reflex speaker system used for the center speaker <NS-E114> <SW-P201> Active Servo Processing Subwoofer System with a built-in power amplifier ● This subwoofer system employs Advanced YAMAHA Active Servo Technology which YAMAHA has developed for reproducing higher quality super-bass sound. (Refer to page 12 for details on Advanced YAMAHA Active Servo Technology.) This super-bass sound adds a more realistic, theater-in-the-home effect to your stereo system. ● This subwoofer can be easily added to your existing audio system by connecting to either the speaker terminals or the line output (pin jack) terminals of the amplifier. ● The AUTO STANDBY switch saves you the trouble of setting the POWER switch to the ON or OFF position. 2-way bass-reflex speaker system used for the rear and rear center speakers CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........ II UNPACKING .................................................. IV CAUTION ......................................................... 1 COMPONENTS OF THE PACKAGE .............. 2 SETTING UP THE SPEAKERS ...................... Placing the subwoofer ................................... Placing the center speaker ............................. Mounting the rear and rear center speakers ..... 3 3 4 5 CONNECTIONS .............................................. 6 An example of basic connections .................... 6 How to connect speaker cables to the input and output terminals of the speakers ............... 8 Connecting the subwoofer to speaker output terminals of the amplifier ................................ 9 USING THE SUBWOOFER (SW-P201) ........ 10 Controls and their functions .......................... 10 Adjusting the subwoofer before use ................ 11 ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) .................... 12 TROUBLESHOOTING .................................. 13 SPECIFICATIONS ........................................ 14 E-2 NS-P326 UB(02.3.6)a 2 02.3.6, 10:47 PM Before making connections, place all speakers in their respective positions. The positioning of the speakers is important because it controls the whole sound quality of this system. Place the speakers depending on your listening position by following the instructions below. Speaker configuration Placing speakers This speaker package employs a 7 speaker configuration: 2 main speakers, 2 rear speakers, a center speaker, a rear center speaker and a subwoofer. The main speakers are used for main source sound. The rear and rear center speakers are used for surround sounds, and the center speaker is for center sounds (dialog etc.). The subwoofer is for reinforcing low frequencies on your audio system. Main speakers: On both sides of and at approximately the same height as the TV set. Rear speakers: Behind your listening position, facing slightly inward. About 1.8 m (approx. 6 feet) from the floor. Center speaker: Precisely between the main speakers. Rear center speaker: Precisely between the rear speakers. Subwoofer: Main L Center English SETTING UP THE SPEAKERS The position of the subwoofer is not so critical because low bass tones are not highly directional. Refer to “Placing the subwoofer” below for a recommended positioning of the subwoofer. Main R Subwoofer Subwoofer Main R Center Main L TV-set Rear R Rear L Rear center Rear R Rear center Rear L 䡵 Placing the subwoofer Å ( ı : Subwoofer, NS-P326 UB(02.3.6)a : Main speaker) 3 It is recommended to place the subwoofer on the outside of either the right or the left main speaker. (See fig. Å .) The placement shown in fig. ı is also possible, however, if the subwoofer system is placed directly facing the wall, the bass effect may die because the sound from it and the sound reflected by the wall may cancel out each other. To prevent this from happening, face the subwoofer system at an angle as shown in fig. Å. Note There may be a case that you cannot obtain enough superbass sounds from the subwoofer when listening in the center of the room. This is because “standing waves” have been developed between two parallel walls and they cancel the bass sounds. In such a case, face the subwoofer obliquely to the wall. It also may be necessary to break up the parallel surfaces by placing bookshelves etc. along the walls. 02.3.6, 10:47 PM E-3 䡵 Placing the center speaker Place the speaker on TV whose top is flat or on the floor under the TV or inside the TV rack so that it is stabilized. When placing the speaker on top of the TV, to prevent the speaker from falling down, put the provided fasteners at four points on the bottom of the speaker and the top of the TV. Fastener Peel off the seal Screen Notes ● Do not place the speaker on top of the TV whose area is smaller than the bottom area of the speaker. If placed, the speaker may drop out causing an injury to you. ● Do not place the speaker on top of the TV with an inclination. ● Do not touch the adhesive surface after peeling off the seal as this will weaken its adhesive strength. ● Thoroughly wipe clean the surface where the fastener is to be applied. Note that adhesive strength is weakened if the surface is dirty, oily or wet and that this may cause the center speaker to drop. If you want to mount a speaker on a commercially available speaker stand (for the main/rear/rear center speakers) The screw holes (at an interval of 60 mm) on the bottom and the rear of the speaker can be used to mount the speaker on a speaker stand. * Those screw holes can be used with M4 screws only. 60 mm 60 mm Rear/rear center speaker (bottom) Main speaker (bottom) 60 mm 60 mm Main speaker (rear) Rear/rear center speaker (rear) E-4 NS-P326 UB(02.3.6)a 4 02.3.6, 10:47 PM English 䡵 Mounting the rear and rear center speakers Mount the rear and rear center speakers on a shelf, rack or directly on the floor, or hang them on the wall. 1 Holes To mount the rear and rear center speakers on a wall by using the holes on the speakers’ back panels 2 Diam. 3.5 to 4 mm Min. 20 mm 6 mm Wall/ wall support Tapping screw (Available at the hardware store) 1 Put the provided pads at the four corners on the rear of the rear and rear center speakers to prevent the rear and rear center speakers from moving by vibrations. 2 Fasten screws into a firm wall or wall support as shown in the figure. 3 Hang the holes on the protruding screws. * Make sure that the screws are securely caught by the narrow parts of the holes. * You can use the lower holes on the rear of the rear speakers. WARNING ● Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them on thin plywood or a wall with soft surface material. If mounted, the screws may come out of the flimsy surface and the speakers may fall. This damages the speakers or causes personal injury. ● Do not install the speakers to a wall with nails, adhesives, or any other unstable hardware. Longterm use and vibrations may cause them to fall. ● To avoid accidents resulting from tripping over loose speaker cables, fix them to the wall. ● Select a proper position on the wall to mount the speaker so that no one will injure his/her head or face. 3 60 mm E-5 NS-P326 UB(02.3.6)a 5 02.3.6, 10:47 PM CONNECTIONS Caution: Plug in the subwoofer and other audio/video components after all connections are completed. 䡵 An example of basic connections Main speakers Right Left Rear center speaker Center speaker R MAIN SPEAKERS REAR CENTER L + CENTER + + – – A – – – B + + R L R REAR (SURROUND) L SUB WOOFER OUTPUT Amplifier Subwoofer POWER ON OFF VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY HIGH LOW OFF INPUT2 /MONO INPUT1 FROM AMPLIFIER INPUT2 OUTPUT /MONO TO SPEAKERS Right Left Rear speakers E-6 NS-P326 UB(02.3.6)a To AC outlet 6 02.3.6, 10:47 PM English ● Connect the main, center, rear and rear center speakers to the speaker output terminals of your amplifier with the provided speaker cables. * Connect each speaker making sure not to reverse the polarity (+, –). If the speaker is connected with reversed polarity, the sound will be unnatural and lack bass. * For the main and rear speakers only, connect one speaker to the left (marked L) terminals of your amplifier, and another speaker to the right (marked R) terminals. ● Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer to page 9 for details.) * To connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT2 terminal of the subwoofer. * To connect the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, connect them to both the left L and right R INPUT2 terminals of the subwoofer. Note When connecting to a monaural line output terminal of the amplifier, connect to the L/MONO INPUT2 terminal. E-7 NS-P326 UB(02.3.6)a 7 02.3.6, 10:47 PM 䡵 How to connect speaker cables to the input and output terminals of the speakers For connections, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the speakers. Main/center/rear/rear center speakers Before connecting One side of the provided speaker cable has a white broken line and the other side has no line. Connect the (+) terminals on both the speaker and the amplifier using the side with a white broken line. Connect the (–) terminals on both components using the side with no line. Remove the insulation coating at the extremity of each speaker cable by twisting the coating off. For NS-M104 (main speaker) Red: positive (+) Black: negative (–) 1 3 How to connect: For NS-M104 (main speaker) 2 White broken line For NS-E114 (rear/rear center speaker) and NS-C104 (center speaker) White broken line Red: positive (+) Black: negative (–) 1 Loosen the knob, as shown in the figure. 2 Insert the bare wire. 3 Tighten the knob and secure the cable. Test the firmness of the connection by pulling lightly on the cable at the terminal. For NS-E114 (rear/rear center speaker), NS-C104 (center speaker) and subwoofer’s INPUT1/OUTPUT terminals 1 Press and hold the terminal’s tab, as shown in the figure. 2 Insert the bare wire. 3 Release your finger from the tab and secure the cable. Test the firmness of the connection by pulling lightly on the cable at the terminal. Subwoofer’s INPUT1/OUTPUT terminals Connect the (+) terminals on both the subwoofer and the amplifier using one side of the cable. Connect the (–) terminals on both components using the other side of the cable. Note Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both of them. Red: positive (+) Black: negative (–) E-8 NS-P326 UB(02.3.6)a 8 02.3.6, 10:47 PM English 䡵 Connecting the subwoofer to speaker output terminals of the amplifier If your amplifier has only one set of main speaker output terminals Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers. Left main speaker Right main speaker Subwoofer POWER ON OFF Speaker output terminals VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY INPUT1 HIGH LOW OFF INPUT2 FROM AMPLIFIER /MONO INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS OUTPUT TO SPEAKERS To AC outlet Amplifier If your amplifier has two sets of speaker output terminals Subwoofer Right main speaker Left main speaker POWER ON OFF VOLUME STANDBY-RED ON-GREEN 0 I0 AUTO STANDBY INPUT1 HIGH LOW OFF INPUT2 /MONO FROM AMPLIFIER INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS OUTPUT TO SPEAKERS To AC outlet A Speaker output terminals NS-P326 UB(02.3.6)a 9 Amplifier B (Both A and B speaker outputs must be ON.) 02.3.6, 10:47 PM E-9 USING THE SUBWOOFER (SW-P201) 䡵 Controls and their functions VOLTAGE SELECTOR 8 220V-240V 110V-120V Rear panel POWER VOLUME VOLTAGE SELECTOR 1 ON POWER 7 220V-240V ON 110V-120V OFF OFF 2 STANDBY-RED ON-GREEN 3 0 I0 4 AUTO STANDBY HIGH LOW OFF INPUT2 I0 HIGH LOW OFF VOLUME STANDBY-RED ON-GREEN 0 AUTO STANDBY INPUT2 /MONO /MONO INPUT1 FROM AMPLIFIER OUTPUT 5 TO SPEAKERS 6 1 2 3 POWER switch Set this switch to the ON position to turn on the power of the subwoofer. When the power of the subwoofer is on, the power indicator (2) below the POWER switch lights up GREEN. Set this switch to the OFF position to turn off the power of the subwoofer. Power indicator Lights up GREEN when the POWER switch is set to the ON position and goes off when set to the OFF position. * Standby mode If the POWER switch is set to the ON position and the AUTO STANDBY switch is set to the HIGH or LOW position, this indicator lights up RED when no signal is inputted to the subwoofer. AUTO STANDBY (HIGH/LOW/OFF) switch By setting this switch to the HIGH or LOW position, the subwoofer’s automatic power-switching function operates as described on the next page. If you do not need this function, set to the OFF position. * Make sure to change the setting of this switch only when the POWER switch (1) is in the OFF position. 4 5 6 7 8 INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS INPUT2 terminals Used to input line level signals from the amplifier. INPUT1 (FROM AMPLIFIER) terminals Used to connect the subwoofer with the speaker terminals of the amplifier. OUTPUT (TO SPEAKERS) terminals Can be used for connecting to the main speakers. Signals from the INPUT1 terminals (5) are sent to these terminals. VOLUME control Adjusts the volume level. Turn the control clockwise to increase the volume, and counterclockwise to decrease the volume. VOLTAGE SELECTOR switch (General model only) If the preset setting of the switch is incorrect, set the switch to the proper voltage range (220V-240V or 110V-120V) of your area. Consult your dealer if you are unsure of the correct setting. WARNING Be sure to unplug the subwoofer before setting the VOLTAGE SELECTOR switch correctly. Standby mode The subwoofer is still using a small amount of power in this mode. E-10 NS-P326 UB(02.3.6)a 10 02.3.6, 10:47 PM English Automatic power-switching function If the source being played is stopped and the input signal is cut off for 7 to 8 minutes, the subwoofer automatically switches to the standby mode. (When the subwoofer switches to the standby mode, the power indicator lights up in red.) When you play a source again, the power of the subwoofer turns on automatically by sensing audio signals input to the subwoofer. This function operates by sensing a certain level of low frequency input signal. Usually set the AUTO STANDBY switch to the LOW position. However, if the power is not switched to ON or STANDBY smoothly, set the switch to the HIGH position. In the HIGH position, the power will turn on even with a low level of input signal. But please be aware that the subwoofer may not switch to the standby mode when there is an extremely low input signal. * The power might turn on unexpectedly by sensing noise from other appliances. If that occurs, set the AUTO STANDBY switch to the OFF position and use the POWER switch to switch the power between ON and OFF manually. * This function detects the low-frequency components below 200 Hz of the input signals (i.e., the explosion in the action movie, the sound of the bass guitar or the bass drum, etc.). * The minutes required to switch the subwoofer to the standby mode might change by sensing noise from other appliances. This function is available only when the power of the subwoofer is on (by setting the POWER switch (1) to “ON”). 䡵 Adjusting the subwoofer before use Before using the subwoofer, adjust the subwoofer to obtain the optimum volume balance between the subwoofer and the main speakers by following the procedures described below. Rear panel POWER POWER 3 ON ON OFF OFF VOLUME 1, 5 VOLUME STANDBY-RED ON-GREEN 0 STANDBY-RED ON-GREEN I0 0 I0 AUTO STANDBY AUTO STANDBY HIGH LOW OFF INPUT2 HIGH LOW OFF /MONO INPUT1 FROM AMPLIFIER OUTPUT TO SPEAKERS 1 2 3 Set the VOLUME control to minimum (0). Turn on the power of all the other components. Set the POWER switch to the ON position. * The power indicator lights up in green. 4 Play a source and adjust the amplifier’s volume control to the desired listening level. 5 Increase the volume gradually to adjust the volume balance between the subwoofer and the main speakers. VOLUME Note: It is recommended to set the VOLUME control to the middle position when using all the speakers of this package in a 6.1channel home theater system. 0 I0 Once the volume balance between the subwoofer and the main speakers is adjusted, you can adjust the volume of your whole sound system by using the amplifier’s volume control. However, if you change the main speakers NS-M104 to others, you must make this adjustment again. E-11 NS-P326 UB(02.3.6)a 11 02.3.6, 10:47 PM ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY (for SW-P201) The theory of Yamaha Active Servo Technology has been based upon two major factors, the Helmholtz resonator and negative-impedance drive. Active Servo Processing speakers reproduce the bass frequencies through an “air woofer”, which is a port or opening in the speaker’s cabinet. This opening is used instead of, and performs the functions of, a woofer in a conventionally designed speaker system. Thus, signals of low amplitude within the cabinet can, according to the Helmholtz resonance theory, be outputted from this opening as waves of great amplitude if the size of the opening and the volume of the cabinet are in the correct proportion to satisfy a certain ratio. In order to accomplish this, moreover, the amplitudes within the cabinet must be both precise and of sufficient power because these amplitudes must overcome the “load” presented by the air that exists within the cabinet. Thus it is this problem that is resolved through the employment of a new design in which the amplifier supplies special signals. If the electrical resistance of the voice coil could be reduced to zero, the movement of the speaker unit would become linear with respect to signal voltage. To accomplish this, a special negative-impedance output-drive amplifier for subtracting output impedance of the amplifier is used. By employing negative-impedance drive circuits, the amplifier is able to generate precise, low-amplitude, lowfrequency waves with superior damping characteristics. These waves are then radiated from the cabinet opening as high-amplitude signals. The system can, therefore, by employing the negative-impedance output drive amplifier and a speaker cabinet with the Helmholtz resonator, reproduce an extremely wide range of frequencies with amazing sound quality and less distortion. The features described above, then, are combined to be the fundamental structure of the conventional Yamaha Active Servo Technology. Our new Active Servo Technology — Advanced Yamaha Active Servo Technology — adopted Advanced Negative Impedance Converter (ANIC) circuits, which allows the conventional negative impedance converter to dynamically vary in order to select an optimum value for speaker impedance variation. With this new ANIC circuits, Advanced Yamaha Active Servo Technology can provide more stable performance and improved sound pressure compared with the conventional Yamaha Active Servo Technology, resulting in more natural and dynamic bass reproduction. Air woofer (Helmholtz resonator) Cabinet High-amplitude bass sound Port Advanced Negativeimpedance Converter Active Servo Processing Amplifier Signals Signals of low amplitude E-12 NS-P326 UB(02.3.6)a 12 02.3.6, 10:47 PM English TROUBLESHOOTING Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. Cause Problem What to Do No sound. Speaker cables are not connected securely. Connect them securely. Sound level is too low. Speaker cables are not connected correctly. Connect them correctly, that is L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. For SW-P201 Cause Problem What to Do Power is not supplied even though the POWER switch is set to the ON position. The power plug is not securely connected. Connect it securely. No sound. The VOLUME control is set to 0. Turn the VOLUME control to the right. Speaker cables are not connected securely. Connect them securely. Speaker cables are not connected correctly. Connect them correctly, that is L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. A source sound with few bass frequencies is played. Play a source sound with bass frequencies. It is influenced by standing waves. Reposition the subwoofer or break up the parallel surface by placing bookshelves etc. along the walls. The POWER switch is set to the OFF position. Set the POWER switch to the ON position. The AUTO STANDBY switch is set to the OFF position. Set the AUTO STANDBY switch to the “HIGH” or “LOW” position. The level of input signal is too low. Set the AUTO STANDBY switch to the “HIGH” position. There is an influence of noise generated from external appliances etc. Move the subwoofer farther away from such appliances and/or reposition the connected speaker cables. Otherwise, set the AUTO STANDBY switch to the “OFF” position. The AUTO STANDBY switch is set to the OFF position. Set the AUTO STANDBY switch to the “HIGH” or “LOW” position. The subwoofer turns into the standby mode unexpectedly. The level of input signal is too low. Set the AUTO STANDBY switch to the “HIGH” position. The subwoofer turns on unexpectedly. There is an influence of noise generated from external appliances etc. Move the subwoofer farther away from such appliances and/or reposition the connected speaker cables. Otherwise, set the AUTO STANDBY switch to the “OFF” position. Sound level is too low. The subwoofer does not turn on automatically. The subwoofer does not turn into the standby mode automatically. E-13 NS-P326 UB(02.3.6)a 13 02.3.6, 10:47 PM SPECIFICATIONS 䡵 NS-M104 䡵 SW-P201 Type .............................. 2-way bass-reflex speaker system Magnetic shielding type Type ............... Advanced Yamaha Active Servo Technology Driver .............................................. 12 cm (5”) cone woofer 2.5 cm (1”) balanced dome tweeter Driver ...................................... 16 cm (6-5/16”) cone woofer Magnetic shielding type Amplifier Output .................................................... 50W/5Ω Impedance ..................................................................... 6Ω Frequency Response ............................... 30 Hz to 200 Hz Frequency Response ............................... 65 Hz to 28 kHz Power Supply USA and Canada models ....................... AC 120V, 60 Hz U.K. and Europe models ........................ AC 230V, 50 Hz Australia model ....................................... AC 240V, 50 Hz General model .............. AC 110-120/220-240V, 50/60 Hz Nominal Input Power .................................................. 50W Maximum Input Power .............................................. 160W Sensitivity ................................................... 89 dB/2.83V/m Crossover Frequency ............................................... 5 kHz Dimensions (W x H x D) .................... 140 x 300 x 167 mm (5-1/2” x 11-13/16” x 6-9/16”) Weight ............................................. 1.9 kg (4 lbs. 3 oz.) x 2 Power Consumption ................................................... 42W (In the standby mode: 6W) Dimensions (W x H x D) .................... 200 x 395 x 384 mm (7-7/8” x 15-9/16” x 15-1/8”) Weight ................................................. 9.3 kg (20 lbs. 7 oz.) 䡵 NS-C104 Type ............................... 2-way bass-reflex speaker system Magnetic shielding type 䡵 Accessories Subwoofer cable x 1 Speaker cable (4 m) x 3 Speaker cable (15 m) x 3 Fastener x 4 Pad x 12 Driver .......................................... 7 cm (3”) cone woofer x 3 1.5 cm (5/8”) tweeter Impedance ..................................................................... 6Ω Frequency Response ............................... 95 Hz to 20 kHz Nominal Input Power .................................................. 70W Maximum Input Power .............................................. 180W Sensitivity ................................................... 91 dB/2.83V/m * Specifications are subject to change without notice due to product improvements. Dimensions (W x H x D) ...................... 440 x 85 x 122 mm (17-5/16” x 3-5/16” x 4-13/16”) Weight ................................................. 1.7 kg (3 lbs. 11 oz.) 䡵 NS-E114 Type ............................... 2-way bass-reflex speaker system Magnetic shielding type Driver .............................................. 10 cm (4”) cone woofer 1.9 cm (3/4”) balanced dome tweeter Impedance ..................................................................... 6Ω Frequency Response ............................. 110 Hz to 27 kHz Nominal Input Power .................................................. 30W Maximum Input Power .............................................. 110W Sensitivity ................................................... 91 dB/2.83V/m Crossover Frequency ............................................. 14 kHz Dimensions (W x H x D) ...................... 120 x 250 x 92 mm (4-3/4” x 9-13/16” x 3-5/8”) Weight ............................................. 1.1 kg (2 lbs. 6 oz.) x 3 E-14 NS-P326 UB(02.3.6)a 14 02.3.6, 11:06 PM YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN, BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VASTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA NS-P326 UB(02.3.6)a 16 02.3.6, 11:07 PM Printed in China V935890
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Yamaha NS-P326 El manual del propietario

Categoría
Altavoces de la barra de sonido
Tipo
El manual del propietario