AEG L75280FL Manual de usuario

Categoría
Lavadoras
Tipo
Manual de usuario

Este manual también es adecuado para

L 75280 FL
L 75480 FL
L 75480 VFL
EN WASHING MACHINE USER MANUAL 2
ES LAVADORA MANUAL DE INSTRUCCIONES 36
SERVICE
When contacting Service, ensure that
you have the following data available.
The information can be found on the
rating plate.
Model
PNC
Serial Number
The following symbols are used in this
user manual:
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice
CONTENTS
4 SAFETY INFORMATION
6 ENVIRONMENT CONCERNS
6 TECHNICAL INFORMATION
7 PRODUCT DESCRIPTION
7 ACCESSORIES
8 CONTROL PANEL
12 PROGRAMMES
15 BEFORE FIRST USE
15 USING THE APPLIANCE
15 LOADING THE LAUNDRY
16 USING THE DETERGENT AND ADDITIVES
17 SETTING AND STARTING A PROGRAMME
18 AT THE END OF PROGRAMME
20 HELPFUL HINTS AND TIPS
22 CARE AND CLEANING
27 TROUBLESHOOTING
30 INSTALLATION
2
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg.com/shop
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
www.aeg.com
ENGLISH
3
SAFETY INFORMATION
Before the installation and use, read
this manual carefully:
For your safety and the safety of your
property
To help the environment
For the correct operation of the ap-
pliance.
Always keep these instructions with the
appliance also if you move or give it to
a different person.
The manufacturer is not responsible if
an incorrect installation and use causes
damage.
CHILDREN AND VULNERABLE
PERSON SAFETY
Do not let persons, children inclu-
ded, with reduced physical sensory,
reduced mental functions or lack of
experience and knowledge use the
appliance. They must have supervi-
sion or instruction for the operation
of the appliance by a person who is
responsible for their safety. Do not
let children play with the appliance.
Keep all packaging away from chil-
dren. There is the risk of suffocation
or injury.
Keep all detergents away from chil-
dren.
Keep children and pets away from
the appliance when the door is open.
Before you close the appliance door,
make sure that children and pets are
not into the drum.
If the appliance has a child safety de-
vice, we recommend to activate it.
CHILD SAFETY DEVICE
When you activate this device, you
cannot close the door. This prevents
children or pets to be closed in the
drum. To activate the device, turn it
clockwise, until the groove is horizon-
tal. To deactivate the device, turn it
counterclockwise, until the groove is
vertical.
GENERAL SAFETY
Do not use the appliance for profes-
sional use. The appliance is only for
domestic use.
Do not change the specifications of
this appliance. There is the risk of in-
jury and damage to the appliance.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Risk of explosion or fire.
Obey the safety instructions on the
detergent packaging to prevent
burns to eyes, mouth and throat.
Make sure that you remove all metal
objects from the laundry. Hard and
sharp material can cause damage to
the appliance.
Do not touch the glass of the door
while a programme operates. The
glass can be hot (only for front-load-
ing appliances).
CARE AND CLEANING
Deactivate the appliance and discon-
nect the mains plug from the mains
socket.
Do not use the appliance without the
filters. Make sure that the installation
of the filters is correct. An incorrect
installation causes water leakages.
INSTALLATION
The appliance is heavy, be careful
when you move it.
Do not transport your appliance with-
out the transit bolts, you can damage
4
internal components and cause leak-
ages or malfunctions.
Do not install and connect a dam-
aged appliance.
Make sure to remove all packaging
and transport bolts.
Make sure that the mains plug is dis-
connected from the mains socket
during installation.
Only a qualified person must do the
electrical installation, the plumbing
and the installation of the appliance.
This to prevent the risks of structural
damage or injury.
Do not install or use the appliance
where the temperature is less than 0
°C.
When you install the appliance on a
carpet floor, make sure that there is
air circulation between the appliance
and the carpet. Adjust the feet to
have the necessary space between
the appliance and the carpet.
Water connection
Do not connect the appliance with
old hoses already used. Only use new
hoses.
Make sure not to cause damage to
the water hoses.
Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some mi-
nutes, then connect the inlet hose.
The first time you use the appliance,
make sure that the water hoses and
the couplings do not have leakages.
Electrical connection
Make sure that the appliance is
earthed.
Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply.
Always use a correctly installed
shockproof socket.
Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
Do not replace or change the mains
cable. Contact the service centre.
Make sure not to cause damage to
the mains plug and cable.
Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access
to the mains plug after the installa-
tion.
Do not pull the mains cable to dis-
connect the appliance. Always pull
the mains plug.
DISCARD THE APPLIANCE
1. Disconnect the mains plug from the
mains socket.
2. Cut off the mains cable and discard
it.
3. Discard the door catch. This pre-
vents children or pets to be closed
in the appliance. There is a risk of
suffocation (only for front-loading
appliances).
ENGLISH
5
ENVIRONMENT CONCERNS
PACKAGING MATERIALS
Recycle the materials with the symbol
.
Put the packaging in applicable con-
tainers to recycle it.
ECOLOGICAL HINTS
To help the environment, use less water
and energy, obey these instructions:
Set a programme without the pre-
wash phase to wash laundry with nor-
mal soil.
Always start a washing programme
with the maximum load of laundry.
If necessary, use a stain remover
when you set a programme with a
low temperature.
To use the correct quantity of the de-
tergent, check the water hardness of
your domestic system
The symbol
on the product or on its
packaging indicates that this product
may not be treated as household
waste. Instead it should be taken to the
appropriate collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative
consequences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
purchased the product.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth 600 / 850 / 605 mm
Total depth 640 mm
Electrical connection: Voltage
Overall power
Fuse
Frequency
230 V
2200 W
10 A
50 Hz
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
IPX4
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Water supply
1)
Cold water
Maximum load Cotton 8 kg
Spin speed Maximum 1200 rpm (L 75280 FL)
1400 rpm (L 75480 FL - L
75480 VFL)
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
6
PRODUCT DESCRIPTION
1 2 3
8
9
5
6
7
4
10
11
12
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump
7
Feet for the appliance level
8
Water drain hose
9
Water inlet valve
10
Mains cable
11
Transit bolts
12
Feet for the appliance level
ACCESSORIES
1 2
34
1
Spanner
To remove the transit bolts.
2
Plastic caps
To close the holes on the rear side
of the cabinet after the removal of
the transit bolts.
3
Anti-flood inlet hose
To prevent possible leakage
4
Plastic hose guide
To connect the drain hose on the
edge of a sink.
ENGLISH
7
CONTROL PANEL
1 2 3
45678910
1
On/Off button (Marcha/Parada)
2
Programme knob
3
Display
4
Start Pause button (Start/Pausa)
5
Delay start button (Inicio Diferido)
6
Time saving button (Ahorra Tiem-
po)
7
Extra rinse button (Aclarado Extra)
8
Stain button (Manchas)
9
Spin reduction button (Centrif.)
10
Temperature button (Temp.)
ON OFF BUTTON
1
Press this button to activate or deacti-
vate the appliance. A tune sounds when
the appliance is activated.
The AUTO Stand-by function automati-
cally deactivates the appliance to de-
crease the energy consumption when:
You do not use the appliance for 5
minutes before you press button
4
.
All settings are cancelled.
Press button
1
to activate the ap-
pliance again.
Set again the washing programme
and all possible options.
After 5 minutes from the end of the
washing programme. Refer to 'At the
end of programme'.
PROGRAMME KNOB
2
Turn this knob to set a programme. The
related programme indicator comes on.
DISPLAY
3
A B C D
8
The display shows:
A The maximum temperature of the programme.
B The default spin speed of the programme.
'No Spin'
1)
and 'Rinse Hold' symbols.
C
The display symbols.
2)
Symbols Description
Washing phase
Rinse phases
Spin phase
Child lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
There is water in the drum.
The 'Rinse Hold' function is on.
Delay start
D The programme time
When the programme starts, the time decreases with steps of 1 minute.
The delay start
When you press the delay start button, the display shows the delay start
time.
•Alarm codes
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
•Err
The display shows this message for some seconds if:
You set a function that is not applicable for the programme.
You change the programme while it operates.
The indicator of the Start/Pause button
4
flashes.
When the programme is completed.
1)
Only available for Spin/Drain programme.
2)
The symbols appear on the display when the related phase or function is set.
START/PAUSE BUTTON
4
Press button
4
to start or interrupt a
programme.
DELAY START BUTTON
5
Press button
5
to delay the start of a
programme from 30 minutes to 20
hours.
ENGLISH
9
TIME SAVE BUTTON
6
Press the button
6
to decrease the
programme duration.
Press one time to set 'Shortened du-
ration' for items with daily soil.
Press two times to set 'Extra Quick'
for items with almost no soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
7
Press button
7
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
STAIN BUTTON
8
Press button
8
to add the stain phase
to a programme.
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available
with a temperature lower than
40° C.
SPIN BUTTON
9
Press this button to:
Decrease the maximum speed of the
spin phase when you set a pro-
gramme.
The display shows only the spin
speeds available with the set
programme.
Deactivate the spin phase.
Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
Spin phase is off.
'Rinse Hold' function is
on.
TEMPERATURE BUTTON
10
Press button
10
to change the default
temperature.
- - = cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
You activate the appliance.
You deactivate the appliance.
You press the buttons.
The programme is completed.
The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
8
and button
7
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you press the buttons
and when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
To activate the function, press button
10
and button
9
at the same time
until the display shows the symbol
.
To deactivate the function, press but-
ton
10
and button
9
at the same
time until the symbol
goes off.
You can activate the function:
Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
After you press the Start/Pause but-
ton
4
, all the buttons and the pro-
gramme knob are deactivated.
10
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
To activate the function press button
6
and button
5
at the same time
until the indicator of button
7
is on.
To deactivate the function press but-
ton
6
and button
5
at the same
time until the indicator of button
7
is off.
ENGLISH
11
PROGRAMMES
Programme
Temperature
Type of load
max. weight of load
Cycle description Functions
Algodón
Cottons
95° - Cold
White and coloured
cotton with normal
soil.
max. 8 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
STAIN
1)
EXTRA RINSE
TIME SAVE
2)
Algodón + Prél-
avado
Cottons + Pre-
wash
95° - Cold
White and coloured
cotton with heavy
soil.
max. 8 kg
Prewash
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
STAIN
EXTRA RINSE
TIME SAVE
2)
Extra Silencio
Extra Silent
95° - Cold
White and coloured
cotton with normal
soil.
max. 8 kg
Stop with water in
the drum
Rinses
Long spin
STAIN
EXTRA RINSE
TIME SAVE
2)
Sintéticos
Synthetics
60° - Cold
Synthetic or mixed
fabric items with nor-
mal level of soil.
max. 4 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
STAIN
1)
EXTRA RINSE
TIME SAVE
2)
Plancha Fácil
Easy Iron
3)
60° - Cold
Synthetic fabric
items with normal
soil.
max. 4 kg
Wash
Rinses
Short spin
RINSE HOLD
EXTRA RINSE
TIME SAVE
Delicados
Delicates
40° - Cold
Delicate fabrics as
acrylics, viscose, pol-
yester items with
normal soil.
max. 4 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
STAIN
1)
EXTRA RINSE
TIME SAVE
2)
Lana / Seda
Wool / Silk
40° - Cold
Machine washable
wool. Hand washa-
ble wool and deli-
cate fabrics with
«hand washing» care
symbol.
max. 2 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
Mantas - Edre-
dones
Duvet
60° - 30°
One synthetic blan-
ket, duvet, bed-
spread and so on.
max. 3 kg
Wash
Rinses
Short spin
SPIN REDUCTION
Centrifugado /
Descarga
Spin / Drain
4)
All fabrics
The maximum load
of the laundry is rela-
ted to the type of
laundry.
Drainage of the
water
Spin phase at the
maximum speed.
SPIN REDUCTION
NO SPIN
12
Programme
Temperature
Type of load
max. weight of load
Cycle description Functions
Aclarado
Rinse
Hand washing items. Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
5)
Tejidos Gruesos
60° - Cold
All items in jeans.
Jersey made items
with hi-tech materi-
als.
max. 4 kg
Wash
Rinses
Short spin
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
TIME SAVE
2)
20 Min. - 3 Kg
30°
Cotton and synthetic
items with light soil
or worn only one
time.
Wash
Rinses
Short spin
SPIN REDUCTION
Super Eco
6)
Cold
Mixed fabrics (cot-
ton and synthetic
items).
max. 3 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
Algodón Eco
7)
60° - 40°
White and fast col-
oured cotton with
normal soil.
max. 8 kg
Wash
Rinses
Long spin
SPIN REDUCTION
RINSE HOLD
STAIN
EXTRA RINSE
TIME SAVE
1)
The Stain function is not available with a temperature lower than 40°C.
2)
if you set the Extra Quick function, we recommend you to decrease the quantity of the
load. It is possible to keep the full load but the washing results are not good.
3)
The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds
some rinses.
4)
The default phase of the spin speed is related to cotton items. Set the spin speed. Make
sure that it agrees with the laundry.
5)
Press EXTRA RINSE button to add rinses. With a low spin speed the appliance performs
delicate rinses and a short spin.
6)
Set this programme to decrease the time and the consumption of energy and water. Use a
special detergent for very low temperature.
7)
Set this programme to have a good washing results and decrease the energy consumption.
The time of the washing programme is extended.
STEAM PROGRAMMES
Programme
1)
Type of load Max. load
Refrescar
Steam Refresh
This cycle removes odours from
the laundry.
Steam does not remove
animal odours.
Cotton and synthetic items.
Do not set the Steam pro-
gramme for this type of
clothes:
Clothes which is not speci-
fied on the care label as be-
ing suitable for tumble-dry-
ing.
up to 1.5 Kg
ENGLISH
13
Programme
1)
Type of load Max. load
Anti-arrugas
Steam Anticrease
This programme helps to dew-
rinkle the laundry.
Clothes with inclusion of
plastic, metal, wooden parts
or alike.
up to 1.5 Kg
Steam can be used for dried, washed or worn once laundry. These pro-
grammes can reduce creases and odours and make your laundry more
smooth.
Do not use any detergent. If necessary, remove stains by washing or using
localized stain removal.
Steam programmes do not perform any hygienic cycle.
1)
If you set a Steam programme with dried laundry, at the end of the cycle the laundry feels
humid. It is better to expose clothes to the fresh air for about 10 minutes to let the humidity
dry. Laundry should be removed from the drum as quick as possible. After a steam cycle,
clothes may to be ironed anyway, but with less effort!
CONSUMPTION VALUES
Programme
1)
Energy consumption
(KWh)
2)
Water consump-
tion (litre)
2)
White Cottons 95 °C 2.50 76
Cottons 60 °C 1.60 72
Cottons 40 °C 1.00 72
Synthetics 40 °C 0.60 50
Delicates 40 °C 0.70 60
Wool/ Handwash 30 °C 0.35 57
1)
Refer to the display for the programme time.
2)
The consumption information shown in this chart is indicative. It can vary depending on the
quantity and the type of laundry, on the temperature of the water supply and on the
ambient temperature.
Standard programmes for the
Energy Label consumption
values
The cotton 60 °C economy and cotton
40 °C economy are the standard cotton
programmes for normally soiled cotton
laundry. They are suitable to clean nor-
mally soiled cotton laundry and they
are the most efficient programmes in
terms of combined energy and water
consumption for washing that type of
cotton laundry.
They agree with EN60456.
The actual water temperature
may differ from the declared cy-
cle temperature.
14
BEFORE FIRST USE
1. To activate the drain system, put 2
litre of water in the main wash com-
partment of the detergent dispens-
er.
2. Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start
a programme for cotton at the
highest temperature without laun-
dry. This removes all possible dirt
from the drum and the tub.
USING THE APPLIANCE
1. Open the water tap.
2. Connect the mains plug to the
mains socket.
3.
Press button
1
to activate the ap-
pliance.
4. Put the laundry in the appliance.
5. Use the correct quantity of deter-
gent and additives.
6. Set and start the correct pro-
gramme for the type of laundry and
soil.
LOADING THE LAUNDRY
1. Open the appliance door.
2. Put the laundry in the drum, one
item at a time. Shake the items be-
fore you put them in the appliance.
Make sure not to put too much
laundry in the drum.
3. Close the door.
Make sure that no laundry stays be-
tween the seal and the door. There is a
risk of water leakage or damage to the
laundry.
ENGLISH
15
USING THE DETERGENT AND ADDITIVES
The detergent compartment for the prewash phase and the soak
programme.
Add the detergent for prewash and soak before the start of the
programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level for the quantity of liquid additives.
The compartment for the stain remover.
Put the product in the compartment and set the stain function be-
fore you start the programme.
Flap for powder or liquid detergent
Turn it (up or down) in the correct position to use powder or liquid
detergent.
Always obey the instructions that you find on the packaging of the deter-
gent products.
Check the position of the flap
1. Pull out the detergent dispenser
until it stops.
2. Press the lever down to remove the
dispenser.
16
3. To use powder detergent, turn the
flap up.
4. To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
Do not use gelatinous or thick
liquid detergents.
Do not put more liquid deter-
gent than the limit showed in
the flap.
Do not set the prewash
phase.
Do not set the delay start
function.
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The re-
lated programme indicator comes
on.
2.
The indicator of button
4
flashes
with red colour.
3. The display shows the default tem-
perature and spin speed. To
change the temperature and/or the
spin speed, press the related but-
tons.
4. Set the available functions. The in-
dicator of the set function comes
on or the display shows the related
symbol.
5.
Press button
4
to start the pro-
gramme. The indicator of button
4
is on.
INTERRUPT A PROGRAMME
1.
Press button
4
. The indicator
flashes.
2.
Press button
4
again. The wash-
ing programme continues.
CANCEL A PROGRAMME
1.
Press button
1
to cancel the pro-
gramme and to deactivate the ap-
pliance.
2.
Press button
1
again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
ENGLISH
17
CHANGE A FUNCTION
You can change only some functions
before they operate.
1.
Press button
4
. The indicator
flashes.
2. Change the function set.
SET THE DELAY START
1.
Press button
5
again and again
until the display shows the number
of minutes or hours. The related
symbols comes on.
2.
Press button
4
, the appliance
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
Before you press button
4
to
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
CANCEL THE DELAY START
1.
Press button
4
. The related indi-
cator flashes.
2.
Press button
5
again and again
until the display shows 0’.
3.
Press button
4
. The programme
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
. The door lock
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
. The programme or the
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
in the drum.
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
AT THE END OF PROGRAMME
The appliance stops automatically.
The acoustic signals operate.
In the display
comes on.
The indicator of the Start/Pause but-
ton
4
goes off.
The door lock symbol goes off.
Press button
1
to deactivate the ap-
pliance. After five minutes from the
end of the programme, the energy
saving function automatically deacti-
vates the appliance.
When you activate the appli-
ance again, the display show the
end of the last set programme.
Turn the programme knob to
set a new cycle.
Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
Keep the door ajar, to prevent mil-
dew and odours.
Close the water tap.
The washing programme is
completed, but there is water in the
drum:
The drum turns regularly to prevent
the creases in the laundry.
–The door stays locked.
You must drain the water to open the
door.
18
To drain the water:
1. If necessary, decrease the spin
speed.
2.
Press the Start/Pause button
4
.
The appliance drain the water and
spin.
3. When the programme is comple-
ted and the door lock symbol goes
off, you can open the door
4. Deactivate the appliance.
The appliance drain and spin
automatically after approximate-
ly 18 hours.
ENGLISH
19
HELPFUL HINTS AND TIPS
THE LAUNDRY LOAD
Divide the laundry in: white, col-
oured, synthetics, delicates and wool.
Obey the washing instructions that
are on the laundry care labels.
Do not wash together white and col-
oured items.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty the pockets and unfold the
items.
Turn inside out multilayered fabrics,
wool and items with painted illustra-
tions.
Remove hard stains.
Wash with a special detergent heavy
soil stains.
Be careful with the curtains. Remove
the hooks or put the curtains in a
washing bag or pillowcase.
Do not wash in the appliance :
Laundry without hems or with cuts
Underwired bras.
Use a washing bag to wash small
items.
A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
STUBBORN STAINS
For some stains, water and detergent is
not sufficient.
We recommend that you remove these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is ap-
plicable to the type of stain and fabric.
DETERGENTS AND ADDITIVES
Only use detergents and additives
specially made for washing machines.
Do not mix different types of deter-
gents.
To help the environment, do not use
more than the correct quantity of de-
tergent.
Obey the instructions that you find
on the on packaging of these prod-
ucts.
Use the correct products for the type
and colour of the fabric, the pro-
gramme temperature and the level of
soil.
If you use liquid detergents, do not
set the prewash phase.
If your appliance has not the deter-
gent dispenser with the flap device,
add the liquid detergents with a dos-
ing ball.
WATER HARDNESS
If the water hardness in your area is
high or moderate, we recommend that
you use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to
use a water softener.
To know the water hardness in your
area, contact your local water authority.
Obey the instructions that you find on
the packaging of the products.
Equivalent scales measure the water
hardness:
German degrees (°dH).
French degrees (°TH).
mmol/l (millimol for each litre - inter-
national unit for the hardness of wa-
ter).
Clarke degrees.
20
Water hardness table
Level Type
Water hardness
°dH °T.H. mmol/l Clarke
1 soft 0-7 0-15 0-1.5 0-9
2 medium 8-14 16-25 1.6-2.5 10-16
3 hard 15-21 26-37 2.6-3.7 17-25
4 very hard > 21 > 37 >3.7 >25
ENGLISH
21
CARE AND CLEANING
WARNING!
Disconnect the appliance from the
mains supply before you clean it.
DESCALING
The water we use contains limescale. If
it becomes necessary, use a water soft-
ener to remove limescales.
Use a special product made for wash-
ing machines. Obey the instructions
that you find on the packaging of the
manufacturer.
Do this separately from the laundry
wash.
EXTERNAL CLEANING
Clean the appliance only with soap and
warm water. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents or
chemical products.
MAINTENANCE WASH
With the low temperature programmes
it is possible that some detergent stays
in the drum. Make regularly a mainte-
nance wash. To do this:
Empty the laundry from the drum.
Set the hottest cotton wash pro-
gramme
Use a correct quantity of powder de-
tergent with biological properties.
After each wash, keep the door open
for a while to prevent mould and to let
unpleasant smells go out.
DOOR SEAL
Regularly examine the seal and remove
all objects from the inner part.
DRUM
Regularly examine the drum to prevent
limescale and rust particles.
Only use special products to remove
rust particles from the drum.
To do this:
Clean the drum with special product
for stainless steel.
Start a short programme for cotton at
the maximum temperature with a
small quantity of detergent.
22
DETERGENT DISPENSER
To clean the dispenser:
1
2
1. Press the lever.
2. Pull the dispenser out.
3. Remove the top part of the liquid
additive compartment.
4. Clean all the parts with water.
5. Clean the dispenser recess with a
brush.
6. Put back the dispenser in the re-
cess.
DRAIN PUMP
Regularly examine the drain
pump and make sure that it is
clean.
Clean the pump if:
The appliance does not drain the wa-
ter.
The drum cannot turn.
The appliance makes an unusual
noise because of the blockage of the
drain pump.
The display shows an alarm code be-
cause of the problem with water
drain.
WARNING!
1. Disconnect the mains plug
from the mains socket.
2. Do not remove the filter
while the appliance oper-
ates. Do not clean the drain
pump if the water in the ap-
pliance is hot. The water
must be cold before you
clean the drain pump.
ENGLISH
23
To clean the drain pump:
1. Open the drain pump door.
2. Pull the flap out to remove it.
3. Put a container below the recess of
the drain pump to collect the water
that flows out.
4. Press the two levers and pull for-
ward the drainage duct to let the
water flow out.
1
2
5. When the container is full of water,
put the drainage duct back again
and empty the container. Do steps
4 and 5 again and again until no
more water flows out from the
drain pump.
6. Pull back the drainage duct and
turn the filter to remove it.
7. Remove fluff and objects from the
pump.
8. Make sure that the impeller of the
pump can turn. If this does not oc-
cur, contact the service centre.
24
1
2
9. Clean the filter under the water tap
and put it back in the pump into
the special guides.
10. Make sure that you tighten correct-
ly the filter to prevent leakages.
11. Put the flap back and close the
drain pump door.
THE INLET HOSE FILTER AND
THE VALVE FILTER
It could be necessary to clean the filters
when:
The appliance does not fill with wa-
ter.
The appliance fills with the water for
a long time.
The indicator of button
4
flashes
and the display shows the related
alarm. Refer to 'Troubleshooting'.
WARNING!
Disconnect the mains plug from
the mains socket.
To clean the water inlet filters:
1. Close the water tap.
2. Remove the water inlet hose from
the water tap.
3. Clean the filter in the inlet hose
with a stiff brush.
4. Remove the inlet hose behind the
appliance.
5. Clean the filter in the valve with a
stiff brush or a towel.
45°
35°
6. Install again the inlet hose. Make
sure that the couplings are tight to
prevent leakages.
7. Open the water tap.
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (6) of
'To clean the drain pump'.
If necessary, clean the pump.
Put the drainage duct back and close
the drain pump flap.
ENGLISH
25
When you drain the water with the
emergency drain procedure, you must
activate again the drain system:
1. Put 2 litres of water in the main
wash compartment of the deter-
gent dispenser.
2. Start the programme to drain the
water.
FROST PRECAUTIONS
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Remove the water inlet hose
4. Put the two ends of the inlet hose
in a container and let the water
flow out of the hose.
5. Empty the drain pump. Refer to the
emergency drain procedure
6. When the drain pump is empty, in-
stall the inlet hose again.
WARNING!
Make sure that the temperature
is more than 0 °C before you
use the appliance again.
The manufacturer is not respon-
sible for damages caused by
low temperatures.
26
TROUBLESHOOTING
The start of the appliance does not oc-
cur or it stops during operation.
First try to find a solution to the prob-
lem (refer to the table). If not, contact
the service centre.
With some problems, the acoustic
signals operate and the display
shows an alarm code:
- The appliance does not fill
with water.
- The appliance does not drain
the water.
- The appliance door is open or
not closed correctly.
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem Possible cause Possible solution
The appliance
does not fill with
water.
The water tap is closed. Open the water tap.
The water inlet hose is
damaged.
Make sure that the water inlet
hose has no damages.
The filters in the water in-
let hose is blocked .
Clean the filters. Refer to 'Care
and cleaning'.
The water tap is blocked
or is furred with lime-
scale.
Clean the water tap.
The connection of the
water inlet hose is not
correct.
Make sure that the connection is
correct.
The water pressure is too
low.
Contact your local water authori-
ty.
The appliance
does not drain the
water.
The water drain hose is
damaged.
Make sure that the water drain
hose has no damages.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
The connection of the
water drain hose is not
correct.
Make sure that the connection is
correct.
A washing programme
without the drain phase
is set.
Set the drain programme.
The function Rinse &
Hold is on.
Set the drain programme.
The appliance
door is open or
not closed correct-
ly.
Close the door correctly.
ENGLISH
27
Problem Possible cause Possible solution
The anti-flood de-
vice is on.
Disconnect the appliance.
Close the water tap.
Contact the service centre.
The spin phase
does not operate.
The spin phase is off. Set the spin programme.
The filter of the drain
pump is blocked.
Clean the filter of the drain
pump. Refer to 'Care and clean-
ing'.
Balance problems with
the laundry load.
Adjust manually the items in the
tub and start the spin phase
again.
The programme
does not start.
The mains plug is not
connected in the mains
socket.
Put in the mains plug.
Blow out fuse in the
household fuse box.
Replace the fuse.
You did not press button
4
.
Press button
4
.
The delay start is set. To start immediately the pro-
gramme, cancel the delay start.
The Child Lock function
is activated.
Deactivate the Child Lock func-
tion.
There is water on
the floor.
Leakages from the cou-
plings of the water ho-
ses.
Make sure that the couplings are
tight.
Leakages from the drain
pump.
Make sure that the drain pump
filter is tight.
The water drain hose is
damaged.
Make sure that the water inlet
hose has no damages.
You cannot open
the appliance
door.
The washing programme
is in operation.
Let the washing programme end.
There is water in the
drum.
Set the drain or the spin pro-
gramme.
The appliance
makes an unusual
noise.
Incorrect level of the ap-
pliance.
Adjust the level of the appliance.
Refer to 'Installation'.
You did not remove the
packaging and/or the
transit bolts.
Remove the packaging and/or
the transit bolts. Refer to 'Instal-
lation'.
The load is very small. Add more laundry in the drum.
28
Problem Possible cause Possible solution
The appliance fills
with water and
drain immediately.
The end of the drain
hose is too low.
Make sure that the drain hose is
in the correct position.
The washing re-
sults are not satis-
factory.
The detergent you used
was not sufficient or cor-
rect.
Increase the detergent quantity
or use a different one.
You did not remove the
stubborn stains before
you wash the laundry.
Use special products to remove
the stubborn stains.
Incorrect temperature
was set.
Make sure that you set the cor-
rect temperature.
Too much laundry load. Decrease the laundry load.
After the check, activate the appliance.
The programme continues from the
point of interruption.
If the problem occurs again, contact the
service centre.
If the display shows other alarm codes,
contact the service centre.
ENGLISH
29
INSTALLATION
UNPACKING
1. Use the gloves. Remove the exter-
nal film. If necessary, use a cutter.
2. Remove the cardboard top.
3. Remove the polystyrene packaging
materials.
4. Remove the internal film.
5. Open the door. Remove the poly-
styrene piece from the door seal
and all the items from the drum.
30
6. Put one of the polystyrene packag-
ing elements on the floor behind
the appliance. Carefully put down
the appliance with the rear side on
it. Make sure not to damage the
hoses.
1
2
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical po-
sition.
9. Remove the power supply cable
and the drain hose from the hose
holders.
10. Remove the three bolts. Use the
key supplied with the appliance.
11. Pull out the plastic spacers.
ENGLISH
31
12. Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
WARNING!
Remove all the packaging and
the transit bolts before you in-
stall the appliance.
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
POSITIONING AND LEVELLING
x4
Install the appliance on a flat hard
floor.
Make sure that carpets do not stop
the air circulation below the appli-
ance.
Make sure that the appliance does
not touch the wall or other units
Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibra-
tion, noise and the movement of the
appliance when in operation.
The appliance must be level and sta-
ble.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the lev-
el.
32
THE INLET HOSE
35
O
35
O
35
O
45
O
45
O
45
O
Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
Connect the water inlet hose to the
cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.
Water-stop device
A
The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace
the hose.
WATER DRAINAGE
There are different procedures to con-
nect the drain hose:
ENGLISH
33
With the plastic hose guide.
On the edge of a sink.
Make sure that the plastic guide can-
not move when the appliance drains.
Attach the guide to the water tap or
the wall.
To a stand pipe with vent-hole.
Refer to the illustration. Directly into
a drain pipe at a height of not less
than 60 cm and not more than 100
cm. The end of the drain hose must
always be ventilated , i.e. the inner
diameter of the drainpipe must be
larger than the external diameter of
the drain hose.
Without the plastic hose guide.
•To a sink spigot.
Refer to the illustration. Put the drain
hose in the spigot and tighten it with
a clip. Make sure that the drain hose
makes a loop to prevent that remain-
ing particles go in the appliance from
the sink.
Directly to a built-in drain pipe in the
room wall and tighten it with a clip.
34
You can extend the drain hose
to maximum 400 cm. Contact
the service centre for the other
drain hose and the extension.
ENGLISH
35
SERVICIO TÉCNICO
Cuando se ponga en contacto con el
servicio técnico, asegúrese de tener a
mano los siguientes datos. Puede
encontrar la información en la placa de
características.
Modelo
PNC
Número de serie
En este manual de usuario se utilizan los
símbolos siguientes:
Advertencia - Información importante
sobre seguridad.
Datos y recomendaciones generales
Información medioambiental
Salvo modificaciones
ÍNDICE DE MATERIAS
38 INFORMACIÓN SOBRE SEGURIDAD
40 ASPECTOS MEDIOAMBIENTALES
40 INFORMACIÓN TÉCNICA
41 DESCRIPCIÓN DEL PRODUCTO
41 ACCESORIOS
42 PANEL DE MANDOS
46 PROGRAMAS
50 ANTES DEL PRIMER USO
50 UTILIZACIÓN DEL APARATO
50 CARGAR LA COLADA
50 UTILIZACIÓN DEL DETERGENTE Y LOS ADITIVOS
52 AJUSTE E INICIO DE UN PROGRAMA
53 AL FINALIZAR EL PROGRAMA
55 CONSEJOS ÚTILES
57 MANTENIMIENTO Y LIMPIEZA
62 SOLUCIÓN DE PROBLEMAS
65 INSTALACIÓN
36
PARA OBTENER RESULTADOS PERFECTOS
Gracias por escoger este producto AEG. Este artículo ha sido creado para ofrecer un
rendimiento impecable durante muchos años, con innovadoras tecnologías que
facilitarán su vida y prestaciones que probablemente no encuentre en
electrodomésticos corrientes. Por favor, dedique algunos minutos a la lectura para
disfrutar de todas sus ventajas.
ACCESORIOS Y CONSUMIBLES
En la página web de AEG, encontrará todo lo necesario para la perfecta limpieza y
funcionamiento de todos sus electrodomésticos AEG. Junto con una amplia gama
de accesorios diseñados y fabricados conforme a los elevados estándares de calidad
característicos de la marca, desde utensilios de cocina especializados a cestos de
cubiertos, desde portabotellas a bolsas para el lavado de prendas delicadas...
Visite la tienda web en
www.aeg.com/shop
CONSULTE EN NUESTRO SITIO WEB:
- Productos
- Folletos
- Manuales del usuario
- Solución de problemas
- Información sobre servicios
www.aeg.com
ESPAÑOL
37
INFORMACIÓN SOBRE SEGURIDAD
Antes de instalar y usar el aparato, lea
atentamente este manual:
Por su seguridad y la de su hogar
Para respetar el medio ambiente
Por el correcto funcionamiento del
aparato.
Guarde siempre estas instrucciones jun-
to con el aparato, aunque se mude o lo
dé a otra persona.
El fabricante no se hace responsable de
los daños causados por una instalación
incorrecta.
SEGURIDAD DE NIÑOS Y
PERSONAS VULNERABLES
Este aparato no debe ser usado por
niños, ni por personas con capacida-
des físicas o mentales reducidas, ni
por personas sin experiencia en el
manejo del aparato, a menos que lo
hagan bajo las instrucciones o la su-
pervisión de la persona responsable
de su seguridad. No deje que los ni-
ños jueguen con el aparato.
Mantenga los materiales de embala-
je alejados de los niños. Existe riesgo
de asfixia o lesiones.
Mantenga todos los detergentes fue-
ra del alcance de los niños.
Mantenga a los niños y mascotas ale-
jados del lavavajillas cuando la puer-
ta se encuentre abierta.
Antes de cerrar la puerta del electro-
doméstico, asegúrese de que los ni-
ños y las mascotas no estén en el
tambor.
Si el aparato dispone de dispositivo
de seguridad para niños, se reco-
mienda activarlo.
SEGURIDAD DE LOS NIÑOS
Cuando se activa este dispositivo, no
se puede cerrar la puerta. De esta
forma evitará que los niños o masco-
tas queden encerrados en el tambor.
Para activar el dispositivo, gírelo ha-
cia la derecha hasta que la ranura es-
té en posición horizontal. Para desac-
tivar el dispositivo, gírelo hacia la iz-
quierda hasta que la ranura esté en
posición vertical.
INSTRUCCIONES GENERALES
DE SEGURIDAD
No utilice el aparato para uso profe-
sional. Este aparato está diseñado
exclusivamente para uso doméstico.
No cambie las especificaciones de
este aparato. Existe riesgo de lesio-
nes y daños en el aparato.
No coloque productos inflamables ni
objetos mojados con productos infla-
mables, dentro, cerca o encima del
aparato. Existe peligro de explosión
o incendio.
Siga las instrucciones de seguridad
del envase de detergente para evitar
quemaduras en ojos, boca y gargan-
ta.
Asegúrese de sacar todos los objetos
metálicos de la colada. Los objetos
afilados y duros pueden dañar el
aparato.
No toque el cristal de la puerta mien-
tras esté en marcha un programa. El
cristal puede estar muy caliente (solo
electrodomésticos de carga frontal).
MANTENIMIENTO Y LIMPIEZA
Apague el aparato y desenchúfelo
de la toma de corriente.
No utilice el aparato sin los filtros.
Compruebe que los filtros están ins-
talados correctamente. Una instala-
ción incorrecta puede provocar fugas
de agua.
38
INSTALACIÓN
El aparato es pesado, tenga cuidado
cuando lo mueva.
No transporte el electrodoméstico
sin los pasadores de transporte, pue-
de dañar los componentes internos y
provocar fugas o fallos de funciona-
miento.
No instale ni enchufe un aparato da-
ñado.
Asegúrese de quitar todos los pasa-
dores del embalaje y transporte.
Asegúrese de que el enchufe está
desconectado de la toma de red du-
rante la instalación.
La instalación, fontanería y conexio-
nes eléctricas del aparato debe reali-
zarlas tan sólo un técnico profesional
homologado. De esta forma se evita-
rán riesgos de daños estructurales y
lesiones.
No instale ni utilice el aparato en lu-
gares con temperaturas inferiores a 0
ºC.
Cuando instale el aparato en un sue-
lo enmoquetado, asegúrese de que
el aire circula entre el electrodomés-
tico y la moqueta. Ajuste las patas
para disponer del espacio necesario
entre el aparato y la moqueta.
Conexión de agua
No conecte el aparato con tubos an-
tiguos ya usados. Utilice únicamente
tubos nuevos.
Asegúrese de no provocar daños en
los tubos de agua.
No conecte el aparato a tuberías
nuevas o que no se hayan utilizado
durante un periodo de tiempo largo.
Deje correr el agua durante unos mi-
nutos y, a continuación, conecte la
manguera de entrada.
La primera vez que use el aparato,
asegúrese de que las mangueras y
los acoplamientos no tengan fugas.
Conexión eléctrica
Asegúrese de que el aparato está co-
nectado a tierra.
Asegúrese de que las especificacio-
nes eléctricas de la placa coinciden
con las del suministro eléctrico de su
hogar.
Utilice siempre una toma con aisla-
miento de conexión a tierra correcta-
mente instalada.
No utilice enchufes múltiples ni ca-
bles prolongadores. Existe riesgo de
incendio.
No sustituya ni cambie el cable de
suministro de red. Póngase en con-
tacto con el servicio técnico.
Asegúrese de no provocar daños en
el enchufe ni en el cable.
Conecte el enchufe a la toma de co-
rriente únicamente cuando haya ter-
minado la instalación. Asegúrese de
tener acceso al enchufe del suminis-
tro de red una vez instalado el apara-
to.
No desconecte el aparato tirando del
cable de conexión a la red. Tire siem-
pre del enchufe.
DESECHE EL APARATO.
1. Desenchufe el aparato de la toma
de red.
2. Corte el cable de conexión a la red
y deséchelo.
3. Deseche el cierre de la puerta. De
esta forma evitará que los niños o
mascotas queden encerrados en el
aparato. Existe riesgo de asfixia
(solo para electrodomésticos de
carga frontal).
ESPAÑOL
39
ASPECTOS MEDIOAMBIENTALES
MATERIALES DE EMBALAJE
Recicle los materiales con el símbolo
.
Coloque el material de embalaje en los
contenedores adecuados para reciclar-
lo.
CONSEJOS ECOLÓGICOS
Para contribuir con el medio ambiente,
use menos agua y energía y siga estas
instrucciones:
Ajuste un programa sin la fase de
prelavado para lavar ropa con sucie-
dad normal.
Empiece siempre un programa de la-
vado con la carga de colada máxima.
Si fuera necesario, utilice un quita-
manchas cuando ajuste un programa
a baja temperatura.
Para utilizar la cantidad correcta de
detergente, compruebe la dureza del
agua de su sistema doméstico
El símbolo
que aparece en el
aparato o en su embalaje, indica que
este producto no se puede tratar como
un residuo normal del hogar. Se deberá
entregar, sin coste para el poseedor,
bien al distribuidor, en el acto de la
compra de un nuevo producto similar al
que se deshecha, bien a un punto
municipal de recolección selectiva de
equipos eléctricos y electrónicos para
su reciclaje. Al asegurarse de que este
producto se desecha correctamente,
usted ayudará a evitar posibles
consecuencias negativas para el medio
ambiente y la salud pública, lo cual
podría ocurrir si este producto no se
gestionara de forma adecuada. Para
obtener información más detallada
sobre el reciclaje de este producto,
póngase en contacto con el
Ayuntamiento de su Municipio, ó con la
tienda donde lo compró.
INFORMACIÓN TÉCNICA
Medidas Ancho / Altura / Fondo 600 / 850 / 605 mm
Profundidad total 640 mm
Conexión eléctrica: Tensión
Potencia total
Fusible
Frecuencia
230 V
2200 W
10 A
50 Hz
El nivel de protección contra la entrada de partículas
sólidas y humedad está garantizado por la tapa pro-
tectora, excepto si el equipo de alta tensión no tiene
protección contra la humedad.
IPX4
Presión del suministro de
agua
Mínima 0,5 bares (0,05 MPa)
Máxima 8 bares (0,8 MPa)
Suministro de agua
1)
Agua fría
Carga máxima Algodón 8 kg
Velocidad de centrifuga-
do
Máxima 1200 rpm (L 75280 FL)
1400 rpm (L 75480 FL - L
75480 VFL)
1)
Conecte la manguera de entrada de agua a un grifo con rosca de 3/4 pulgadas.
40
DESCRIPCIÓN DEL PRODUCTO
1 2 3
8
9
5
6
7
4
10
11
12
1
Encimera
2
Dosificador de detergente
3
Panel de mandos
4
Tirador de la puerta
5
Placa de características
6
Bomba de desagüe
7
Pata para nivelación del aparato
8
Tubo de desagüe
9
Válvula de entrada de agua
10
Cable de alimentación
11
Pasadores de transporte
12
Pata para nivelación del aparato
ACCESORIOS
1 2
34
1
Llave inglesa
Para retirar los pasadores de trans-
porte.
2
Tapones de plástico
Para cerrar los orificios de la parte
posterior del armario, después de
extraer los pasadores de transpor-
te.
3
Tubo de entrada antiinundación
Para evitar posibles fugas.
4
Guía de plástico de la manguera
Para conectar el tubo de desagüe
en el borde de un fregadero.
ESPAÑOL
41
PANEL DE MANDOS
1 2 3
45678910
1
Tecla de encendido/apagado
(Marcha/Parada)
2
Selector de programas
3
Pantalla
4
Botón de inicio/pausa (Start/Pau-
sa)
5
Tecla de inicio diferido (Inicio Dife-
rido)
6
Botón de ahorro de tiempo (Aho-
rra Tiempo)
7
Botón de aclarado extra (Aclarado
Extra)
8
Tecla Manchas (Manchas)
9
Tecla de reducción del centrifuga-
do (Centrif.)
10
Tecla de Temperatura (Temp.)
TECLA DE ENCENDIDO/
APAGADO
1
Pulse esta tecla para encender y apagar
el aparato. El aparato emite un tono
cuando se enciende.
La función AUTO Stand-by apaga auto-
máticamente el aparato para reducir el
consumo de energía cuando:
No se utiliza el aparato durante 5 mi-
nutos antes de pulsar el botón
4
.
Se cancelan todos los ajustes.
Pulse la tecla
1
para encender el
aparato de nuevo.
Ajuste de nuevo el programa de
lavado y todas las posibles opcio-
nes.
Transcurridos 5 minutos desde el fi-
nal del programa de lavado. Consul-
te "Al finalizar el programa".
SELECTOR DE PROGRAMAS
2
Gire este botón para ajustar un progra-
ma. Se ilumina el indicador de progra-
ma correspondiente.
PANTALLA
3
A B C D
42
La pantalla muestra:
A Temperatura máxima del programa.
B Velocidad de centrifugado por defecto del programa.
"Sin centrifugado"
1)
y "Agua en la cuba" (símbolos).
C
Símbolos de la pantalla.
2)
Símbolos Descripción
Fase de lavado
Fases de aclarado
Fase de centrifugado
Bloqueo contra la manipulación por niños
No se puede abrir la puerta del aparato cuando el símbolo
está encendido.
Puede abrir la puerta únicamente cuando el símbolo se apa-
gue.
Si el programa termina pero el símbolo sigue encendido:
Hay agua en el tambor.
La función "Agua en la cuba" está encendida.
Inicio diferido
D Duración del programa
Cuando se inicia el programa, el tiempo se reduce a intervalos de 1 mi-
nuto.
Inicio diferido
Cuando se pulsa el botón de inicio diferido, la pantalla muestra la hora
del mismo.
Códigos de alarma
Si el aparato presenta una avería, la pantalla muestra los códigos de alar-
ma. Consulte el capítulo "Solución de problemas".
•Err
La pantalla muestra este mensaje durante unos segundos si:
Se ajusta una función que no es aplicable al programa.
Se cambia el programa mientras está en curso.
El indicador del botón de Inicio/Pausa
4
parpadea.
Cuando el programa ha finalizado.
1)
Solo disponible para el programa Centrifugado/Descarga.
2)
Los símbolos aparecen en la pantalla cuando se ajusta la fase o función correspondiente.
ESPAÑOL
43
BOTÓN DE INICIO/PAUSA
4
Pulse el botón
4
para iniciar o inte-
rrumpir el programa.
TECLA DE INICIO DIFERIDO
5
Pulse el botón
5
para retrasar el inicio
de un programa entre 30 minutos y 20
horas.
TECLA DE AHORRO DE
TIEMPO
6
Pulse el botón
6
para reducir la dura-
ción del programa.
Púlselo una vez para ajustar la "dura-
ción corta" para prendas poco su-
cias.
Púlselo dos veces para ajustar "Extra
rápido" para prendas prácticamente
sin suciedad.
Algunos programas solo admi-
ten una de las dos funciones.
BOTÓN DE ACLARADO
EXTRA
7
Pulse el botón
7
para añadir fases de
lavado a un programa.
Utilice esta función para las personas
alérgicas al detergente y en zonas en
las que el agua sea blanda.
BOTÓN DE MANCHAS
8
Pulse el botón
8
para añadir la fase
de manchas a un programa.
Utilice esta función para coladas con
manchas difíciles de quitar.
Cuando ajuste esta función, coloque el
quitamanchas en el compartimento
.
Esta función aumenta la dura-
ción del programa.
Esta función no está disponible
con temperaturas inferiores a
40° C.
BOTÓN DE CENTRIFUGADO
9
Pulse esta tecla para:
Reducir la velocidad de la fase de
centrifugado máxima cuando se ajus-
ta un programa.
La pantalla muestra únicamente
las velocidades de centrifugado
disponibles para el programa
seleccionado.
Desactivar la fase de centrifugado.
Active la función "Agua en la cuba".
Ajuste esta función para evitar arru-
gas en los tejidos. El aparato no de-
sagua cuando termina el programa.
La fase de centrifugado
está apagada.
La función "Agua en la
cuba" está encendida.
BOTÓN DE TEMPERATURA
10
Pulse el botón
10
para cambiar la tem-
peratura predeterminada.
- - = agua fría
FUNCIÓN DE SEÑALES
ACÚSTICAS
Suena una señal acústica cuando:
Se enciende el aparato.
Se apaga el aparato.
Se pulsan las teclas.
El programa se termina.
Se ha producido algún fallo.
Para desactivar/activar las señales
acústicas, pulse el botón
8
y el botón
7
al mismo tiempo durante 6 segun-
dos.
Si se desactivan las señales
acústicas, siguen funcionando
únicamente cuando se pulsan
los botones y cuando se produ-
ce un fallo.
44
FUNCIÓN DEL BLOQUEO
CONTRA LA MANIPULACIÓN
POR NIÑOS
Esta función impide que los niños jue-
guen con el panel de control.
Para activar la función, pulse el botón
10
y el botón
9
al mismo tiempo
hasta que la pantalla muestre el sím-
bolo
.
Para desactivar la función, pulse el
botón
10
y el botón
9
al mismo
tiempo hasta que se apague el sím-
bolo
.
Puede activar la función:
Antes de pulsar el botón de inicio/
pausa
4
: el aparato no se puede
iniciar.
Después de pulsar el botón Inicio/
Pausa
4
, todos los botones y el se-
lector de programas están desactiva-
dos.
FUNCIÓN DE ACLARADO
EXTRA PERMANENTE
Con esta función puede guardar activa-
da la función de aclarado extra de for-
ma permanente cuando ajuste un nue-
vo programa.
Para activar la función, pulse el botón
6
y el botón
5
al mismo tiempo
hasta que se encienda el indicador
del botón
7
.
Para desactivar la función, pulse el
botón
6
y el botón
5
al mismo
tiempo hasta que se apague el indi-
cador del botón
7
.
ESPAÑOL
45
PROGRAMAS
Programa
Temperatura
Tipo de carga
peso máx. de la car-
ga
Descripción de ci-
clo
Funciones
Algodón
Algodón
95° - Frío
Algodón blanco y de
color con suciedad
normal.
máx. 8 kg
Lavado
Aclarados
Centrifugado lar-
go
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
MANCHAS
1)
ACLARADO EX-
TRA
AHORRO
2)
Algodón + Pré-
lavado
Algodón + Prela-
vado
95° - Frío
Algodón blanco y de
color con suciedad
intensa.
máx. 8 kg
Prelavado
Lavado
Aclarados
Centrifugado lar-
go
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
MANCHAS
ACLARADO EX-
TRA
AHORRO
2)
Extra Silencio
Extra Silent
95° - Frío
Algodón blanco y de
color con suciedad
normal.
máx. 8 kg
Parada con agua
en el tambor
Aclarados
Centrifugado lar-
go
MANCHAS
ACLARADO EX-
TRA
AHORRO
2)
Sintéticos
Sintéticos
60° - Frío
Prendas de tejido
mixto o sintético con
suciedad normal.
máx. 4 kg
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
MANCHAS
1)
ACLARADO EX-
TRA
AHORRO
2)
Plancha Fácil
Planchado fácil
3)
60° - Frío
Prendas de tejido
sintético con sucie-
dad normal.
máx. 4 kg
Lavado
Aclarados
Centrifugado cor-
to
AGUA EN LA CU-
BA
ACLARADO EX-
TRA
AHORRO
Delicados
Delicados
40° - Frío
Tejidos delicados
como acrílicos, vis-
cosa o poliéster con
suciedad normal.
máx. 4 kg
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
MANCHAS
1)
ACLARADO EX-
TRA
AHORRO
2)
46
Programa
Temperatura
Tipo de carga
peso máx. de la car-
ga
Descripción de ci-
clo
Funciones
Lana / Seda
Lana/Seda
40° - Frío
Lana lavable a má-
quina. Lana lavable a
mano y tejidos deli-
cados con el símbo-
lo «lavado a mano».
máx. 2 kg
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
Mantas - Edre-
dones
Edredones
60° - 30°
Una manta sintética,
edredón, colcha,
etc.
máx. 3 kg
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
Centrifugado /
Descarga
Centrifugado /
Descarga
4)
Todos los tejidos
La carga máxima de
la colada es relativa
al tipo de colada.
Desagüe
Fase de centrifu-
gado a máxima
velocidad.
REDUCCIÓN DEL
CENTRIFUGADO
SIN CENTRIFUGA-
DO
Aclarado
Aclarados
Prendas de lavado a
mano.
Aclarados
Centrifugado lar-
go
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
ACLARADO EX-
TRA
5)
Tejidos Gruesos
60° - Frío
Todas las prendas
vaqueras. Jerséis de
materiales de alta
tecnología.
máx. 4 kg
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
ACLARADO EX-
TRA
AHORRO
2)
20 Min. - 3 Kg
30°
Prendas sintéticas y
de algodón con po-
ca suciedad o que
se han llevado una
sola vez.
Lavado
Aclarados
Centrifugado cor-
to
REDUCCIÓN DEL
CENTRIFUGADO
Super Eco
6)
Frío
Tejidos mixtos (algo-
dón y sintéticos).
máx. 3 kg
Lavado
Aclarados
Centrifugado lar-
go
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
ACLARADO EX-
TRA
Algodón Eco
7)
60° - 40°
Algodón blanco y de
colores sólidos con
suciedad normal.
máx. 8 kg
Lavado
Aclarados
Centrifugado lar-
go
REDUCCIÓN DEL
CENTRIFUGADO
AGUA EN LA CU-
BA
MANCHAS
ACLARADO EX-
TRA
AHORRO
ESPAÑOL
47
1)
La función Manchas no está disponible con temperaturas inferiores a 40°C.
2)
Si selecciona la función Extra rápido, se recomienda reducir la cantidad de la carga. Es
posible mantener la carga completa, pero los resultados de lavado no son tan óptimos.
3)
El lavado y el centrifugado son suaves para evitar arrugas en la colada. El aparato añade
algunos aclarados.
4)
La fase predeterminada de la velocidad de centrifugado es relativa a las prendas de
algodón. Ajuste la velocidad de centrifugado. Asegúrese de que coincide con la colada.
5)
Pulse el botón ACLARADO EXTRA para añadir aclarados. Con una velocidad de
centrifugado baja, el aparato realiza aclarados delicados y un breve centrifugado.
6)
Seleccione este programa para reducir la duración y el consumo de energía y agua. Use un
detergente especial para temperaturas muy bajas.
7)
Ajuste este programa para obtener unos buenos resultados de lavado y reducir el consumo
de energía. Se amplía la duración del programa de lavado.
PROGRAMAS DE VAPOR
Programa
1)
Tipo de carga Carga máx
Refrescar
Vapor Aireación
Este ciclo elimina los olores de
la colada.
El vapor no elimina los
olores de animales.
Prendas de algodón y sintéti-
cas.
No ajuste el programa de va-
por para este tipo de prendas:
Prendas cuya etiqueta de
instrucciones no especifique
claramente que pueden se-
carse en secadora.
Prendas con gran parte de
plástico, metal, madera o si-
milares.
hasta 1.5 kg
Anti-arrugas
Antiarrugas vapor
Este programa ayuda a reducir
las arrugas de la colada.
hasta 1.5 kg
El vapor se puede usar para las prendas secadas, lavadas o que se han
puesto una vez. Estos programas pueden reducir la cantidad de arrugas y
los olores y suavizar las prendas.
No utilice detergente. Si es necesario, elimine las manchas lavando o con
quitamanchas en las zonas manchadas.
Los programas de vapor no realizan un ciclo higiénico.
1)
Si ajusta un programa de vapor con la colada seca, al final del ciclo las prendas tienen un
tacto húmedo. Es mejor exponer las prendas al aire fresco durante unos 10 minutos para
que se seque la humedad. Extraiga la colada del tambor lo antes posible. Después del
ciclo de vapor quizá deba planchar de todos modos, ¡pero con menos esfuerzo!
VALORES DE CONSUMO
Programa
1)
Consumo energético
(KWh)
2)
Consumo de agua
(litros)
2)
Algodón blanco 95°C 2.50 76
Algodón 60 °C 1.60 72
Algodón 40 °C 1.00 72
Sintéticos 40 °C 0.60 50
Delicados 40 °C 0.70 60
48
Programa
1)
Consumo energético
(KWh)
2)
Consumo de agua
(litros)
2)
Lana/ Lavado a mano 30 °C 0.35 57
1)
Consulte en la pantalla la duración del programa.
2)
La información sobre consumo que se muestra en este gráfico es puramente indicativa.
Puede variar en función de la cantidad y el tipo de colada, de la temperatura del suministro
de agua y de la temperatura ambiente.
Programas estándar para los
valores de consumo de
etiqueta energética
Algodón ECO 60 °C y 40 °C son pro-
gramas para algodón estándar para
prendas de algodón con suciedad nor-
mal. Son adecuados para lavar colada
de algodón de suciedad normal y son
los programas más eficaces en cuanto a
consumo de agua y energía para el la-
vado de ese tipo de prendas de algo-
dón.
Cumplen la norma EN60456.
La temperatura real del agua
puede variar respecto a la tem-
peratura declarada del ciclo.
ESPAÑOL
49
ANTES DEL PRIMER USO
1. Para activar el sistema de desagüe,
vierta 2 litros de agua en el com-
partimento de lavado principal del
dosificador de detergente.
2. Coloque una pequeña cantidad en
el compartimento de lavado princi-
pal del dosificador. Ajuste e inicie
un programa para algodón a la
temperatura más alta sin colada.
De esta forma se elimina toda la
posible suciedad del tambor y de
la cuba.
UTILIZACIÓN DEL APARATO
1. Abra el grifo.
2. Conecte el enchufe a la toma de
red.
3.
Pulse el botón
1
para encender el
aparato.
4. Introduzca la colada en el aparato.
5. Utilice la cantidad correcta de de-
tergente y aditivos.
6. Ajuste e inicie el programa correcto
para el tipo de colada y suciedad.
CARGAR LA COLADA
1. Abra la puerta del aparato.
2. Introduzca las prendas en el tam-
bor, una por una. Sacuda las pren-
das antes de colocarlas en el apa-
rato. Asegúrese de no colocar de-
masiada colada en el tambor.
3. Cierre la puerta del aparato.
Asegúrese de que no quedan prendas
enganchadas entre la puerta y el cierre.
Podría provocar fugas de agua y dañar
la colada.
UTILIZACIÓN DEL DETERGENTE Y LOS ADITIVOS
50
El compartimento de detergente para la fase de prelavado y el
programa de remojo.
Añada el detergente para el prelavado y remoje antes de iniciar el
programa.
El compartimento de detergente para la fase de lavado.
Si utiliza detergente líquido, introdúzcalo inmediatamente antes
de iniciar el programa.
Compartimento para aditivos líquidos (suavizante, almidón).
Ponga el producto en el compartimento antes de iniciar el pro-
grama.
Es el nivel máximo para la cantidad de aditivos líquidos.
El compartimento del quitamanchas.
Ponga el producto en el compartimento y ajuste la función de
manchas antes de iniciar el programa.
Tapa para detergente líquido o en polvo
Gírelo (hacia arriba o hacia abajo) en la posición correcta para
usar detergente líquido o en polvo.
Cumpla siempre las instrucciones que se encuentran en el envase de los
productos de detergente.
Compruebe la posición de la tapa
1. Tire del depósito dosificador hasta
el tope.
2. Presione la palanca hacia abajo pa-
ra extraer el dosificador.
3. Para usar detergente en polvo, gire
la tapa hacia arriba.
ESPAÑOL
51
4. Para usar detergente líquido, gire
la tapa hacia abajo.
Con la tapa en posición BAJA-
DA:
No utilice detergentes líqui-
dos gelatinosos ni gruesos.
No ponga más detergente lí-
quido que el límite mostrado
en la tapa.
No ajuste la fase de prelava-
do.
No ajuste la función de inicio
diferido.
5. Dosifique el detergente y el suavi-
zante.
6. Cierre con cuidado el dosificador
de detergente. Asegúrese de que
la tapa no obstruye nada al cerrar
el cajón.
AJUSTE E INICIO DE UN PROGRAMA
1. Gire el selector de programas. Se
ilumina el indicador de programa
correspondiente.
2.
El indicador del botón
4
parpa-
dea en color rojo.
3. La pantalla muestra la velocidad de
centrifugado y la temperatura por
defecto. Para cambiar la tempera-
tura o la velocidad de centrifugado,
pulse los botones correspondien-
tes.
4. Programe las funciones disponi-
bles. El indicador de la función
ajustada se enciende o la pantalla
muestra el símbolo correspondien-
te.
5.
Pulse el botón
4
para iniciar el
programa. Se ilumina el indicador
del botón
4
.
INTERRUPCIÓN DE UN
PROGRAMA
1.
Pulse la tecla
4
. El indicador par-
padea.
2.
Pulse la tecla
4
de nuevo. EL pro-
grama de lavado continúa.
CANCELACIÓN DE UN
PROGRAMA
1.
Pulse el botón
1
para cancelar el
programa y apagar el aparato.
2.
Pulse el botón
1
de nuevo para
encender el aparato. Ahora puede
ajustar un nuevo programa de lava-
do.
El aparato no desagua.
CAMBIO DE UNA FUNCIÓN
Puede cambiar únicamente algunas
funciones antes de usarlas.
1.
Pulse la tecla
4
. El indicador par-
padea.
2. Cambio de la función ajustada.
AJUSTE DEL INICIO DIFERIDO
1.
Pulse el botón
5
repetidamente
hasta que la pantalla muestre el nú-
mero de minutos u horas. Los sím-
bolos correspondientes se encien-
den.
52
2.
Pulse la tecla
4
; el aparato inicia
la cuenta atrás del inicio diferido.
El programa de lavado se pone en
marcha de forma automática cuan-
do termina la cuenta atrás.
Antes de pulsar el botón
4
pa-
ra iniciar el aparato, puede can-
celar o cambiar el ajuste del ini-
cio diferido.
No puede ajustar el inicio diferi-
do con el programa de Vapor.
CANCELACIÓN DEL INICIO
RETARDADO
1.
Pulse la tecla
4
. El indicador co-
rrespondiente parpadea.
2.
Pulse el botón
5
repetidamente
hasta que la pantalla muestre 0’.
3.
Pulse la tecla
4
. Se inicia el pro-
grama.
ABRA LA PUERTA
Mientras un programa o el inicio diferi-
do están en marcha, la puerta del apa-
rato está bloqueada.
Para abrir la puerta del aparato:
1.
Pulse la tecla
4
. El símbolo del
candado de la puerta se apaga.
2. Abra la puerta del aparato.
3. Cierre la puerta y pulse el botón
4
. El programa o el inicio diferido
continúan.
Si la temperatura y el nivel de
agua del tambor son demasiado
elevados, el símbolo de blo-
queo de la puerta permanece
encendido y no se puede abrir
la puerta. Para abrir la puerta, si-
ga estos pasos:
1. Apague el aparato.
2. Espere unos minutos.
3. Asegúrese de que no hay
agua en el tambor.
Si apaga el electrodoméstico, es
necesario volver a ajustar el pro-
grama.
AL FINALIZAR EL PROGRAMA
El aparato se para automáticamente.
Se activan las señales acústicas.
En la pantalla se enciende
.
El indicador del botón de Inicio/Pau-
sa
4
se apaga.
El indicador de bloqueo de la puerta
se apaga.
Pulse el botón
1
para apagar el
aparato. Cinco minutos después de
finalizar el programa, la función de
ahorro de energía apaga automática-
mente el aparato.
Cuando se vuelve a encender el
aparato, la pantalla muestra el
final del último programa selec-
cionado. Gire el selector de pro-
gramas para ajustar un nuevo ci-
clo.
Retire la colada del aparato. Asegú-
rese de que el tambor está totalmen-
te vacío.
Deje la puerta entreabierta para evi-
tar la formación de moho y olores
desagradables.
•Cierre la toma de agua.
El programa de lavado ha finalizado,
pero hay agua en el tambor:
El tambor gira regularmente para evi-
tar arrugas en las prendas.
La puerta permanece bloqueada.
Debe drenar el agua para abrir la
puerta.
Para descargar el agua:
1. Si fuera necesario, reduzca la velo-
cidad de centrifugado.
2.
Pulse el botón Inicio/Pausa
4
. El
aparato vacía el agua y centrifuga.
ESPAÑOL
53
3. Cuando el programa termina y el
símbolo de bloqueo de la puerta
se apaga, puede abrir la puerta.
4. Apague el aparato.
El aparato vacía el agua y centri-
fuga automáticamente después
de unas 18 horas.
54
CONSEJOS ÚTILES
CARGAR LA COLADA
Divida la colada en: ropa blanca, ro-
pa de color, ropa sintética, prendas
delicadas y prendas de lana.
Siga las instrucciones de lavado que
se encuentran en las etiquetas de las
prendas.
No lave juntas las prendas blancas y
de color.
Algunas prendas de color pueden
desteñir en el primer lavado. Se reco-
mienda lavarlas por separado la pri-
mera vez.
Abotone las fundas de almohadas y
cierre las cremalleras, los ganchos y
los broches. Ate las correas.
Vacíe los bolsillos y despliegue las
prendas.
Dé la vuelta a las prendas de varias
capas, de lana y con motivos pinta-
dos.
Retire las manchas difíciles.
Lave con detergente especial las
manchas difíciles.
Tenga cuidado con las cortinas. Qui-
te los ganchos o coloque las cortinas
en una bolsa para lavadora o funda
de almohada.
No lave en el aparato:
Prendas sin dobladillos o desgarra-
das
Sujetadores con aros.
Use una bolsa para lavadora para
lavar las prendas pequeñas.
Una carga muy pequeña puede pro-
vocar problemas de desequilibrio en
la fase de centrifugado. Si esto ocu-
rre, ajuste manualmente las prendas
en la cuba e inicie de nuevo la fase
de centrifugado.
MANCHAS DIFÍCILES
Para algunas manchas, el agua y el de-
tergente no son suficientes.
Se recomienda eliminar estas manchas
antes de colocar las prendas en el apa-
rato.
Existen quitamanchas especiales. Utili-
ce el quitamanchas especial adecuado
al tipo de mancha y tejido.
DETERGENTES Y ADITIVOS
Utilice solo detergentes y aditivos es-
pecialmente fabricados para lavado-
ras.
No mezcle diferentes tipos de deter-
gentes.
Para respetar el medio ambiente, no
ponga más detergente del necesario.
Siga siempre las instrucciones que se
encuentran en el envase de estos
productos.
Use los productos adecuados para el
tipo y color del tejido, la temperatura
del programa y el grado de sucie-
dad.
Si utiliza detergente líquido, no ajus-
te la fase de prelavado.
Si el aparato no tiene el dosificador
de detergente con dispositivo de
compuerta, añada los detergentes lí-
quidos con una bola dosificadora.
DUREZA AGUA
Si la dureza del agua de su zona es alta
o moderada, se recomienda usar un
descalcificador de agua para lavadoras.
En las zonas en las que la dureza del
agua sea baja, no es necesario utilizar
un descalcificador.
Póngase en comunicación con las auto-
ridades correspondientes para conocer
la dureza del agua de su zona.
Siga siempre las instrucciones que se
encuentran en el envase de los produc-
tos.
Medida de la dureza del agua en esca-
las equivalentes:
Grados alemanes (°dH).
Grados franceses (°TH).
mmol/l (milimol por litro, unidad in-
ternacional de la dureza del agua).
•Grados Clarke.
ESPAÑOL
55
Tabla de dureza del agua
Nivel Tipo
Dureza agua
°dH °T.H. mmol/l Clarke
1 blanda 0-7 0-15 0-1.5 0-9
2 intermedio 8-14 16-25 1.6-2.5 10-16
3 dura 15-21 26-37 2.6-3.7 17-25
4 muy dura > 21 > 37 >3.7 >25
56
MANTENIMIENTO Y LIMPIEZA
ADVERTENCIA
Desconecte el aparato de la fuente de
alimentación antes de limpiarlo.
DESCALCIFICACIÓN
El agua corriente que utilizamos suele
contener cal. Si es necesario, use un
descalcificador de agua para eliminar la
cal.
Use un producto especial para lavado-
ras. Siga siempre las instrucciones que
se encuentran en el envase del fabri-
cante.
Hágalo de forma separada del lavado
de la colada.
LIMPIEZA DEL EXTERIOR
Limpie el aparato solo con agua tem-
plada y jabón. Seque completamente
todas las superficies.
PRECAUCIÓN
No utilice alcohol, disolventes ni
otros productos químicos.
LAVADO DE
MANTENIMIENTO
Con los programas a baja temperatura,
es posible que quede algo de deter-
gente en el tambor. Realice periódica-
mente un lavado de mantenimiento.
Para ello:
Saque las prendas del tambor.
Seleccione el programa de lavado de
algodón de mayor temperatura
Use la cantidad correcta de deter-
gente en polvo con propiedades bio-
lógicas.
Después de cada lavado, mantenga la
puerta abierta unos instantes para eli-
minar la humedad y los olores desagra-
dables.
JUNTA DE ESTANQUEIDAD DE LA PUERTA
Examine periódicamente la junta y ex-
traiga todos los objetos de la pieza in-
terior.
TAMBOR
Examine periódicamente el tambor pa-
ra evitar la formación de cal y partículas
de óxido.
Utilice únicamente productos especia-
les para eliminar la partículas de óxido
del tambor.
Proceda de la siguiente manera:
Limpie el tambor con un producto
especial para acero inoxidable.
Inicie un programa corto para algo-
dón a la temperatura máxima con
una pequeña cantidad de detergen-
te.
ESPAÑOL
57
DOSIFICADOR DE DETERGENTE
Para limpiar el dosificador:
1
2
1. Presione la palanca.
2. Tire del dosificador hacia fuera.
3. Retire la parte superior del com-
partimento de aditivo líquido.
4. Limpie todas las piezas con agua.
5. Limpie el hueco del dosificador
con un cepillo.
6. Vuelva a colocar el dosificador en
el hueco.
BOMBA DE DESAGÜE
Examine periódicamente la
bomba de desagüe y asegúrese
de que está limpia.
Limpie la bomba si:
El aparato no desagua.
El tambor no gira.
El aparato hace ruidos extraños debi-
do al bloqueo de la bomba.
La pantalla muestra un código de
alarma debido al problema con el
desagüe.
ADVERTENCIA
1. Desenchufe el aparato de la
toma de red.
2. No quite el filtro mientras el
aparato esté en funciona-
miento. No limpie la bomba
si el agua del electrodomés-
tico está caliente. El agua
debe enfriarse para poder
limpiar la bomba de desa-
güe.
58
Para limpiar la bomba de desagüe:
1. Abra la puerta de acceso a la bom-
ba.
2. Tire de la tapa para extraerlo.
3. Coloque un recipiente debajo del
hueco de la bomba para recoger el
agua que salga.
4. Presione las dos palancas y tire del
conducto de desagüe para que sal-
ga el agua.
1
2
5. Cuando el contenedor esté lleno
de agua, vuelva a colocar el con-
ducto y vacíe el contenedor. Reali-
ce los pasos 4 y 5 repetidamente
hasta que no salga más agua de la
bomba.
6. Vuelva a colocar el conducto de
desagüe y gire el filtro para retirar-
lo.
7. Retire las pelusas y objetos de la
bomba.
8. Asegúrese de que el rotor de la
bomba gira. Si no es así, póngase
en contacto con el servicio técnico.
ESPAÑOL
59
1
2
9. Limpie el filtro con agua corriente y
vuelva a colocarlo en la bomba en
las guías especiales.
10. Asegúrese de que lo aprieta co-
rrectamente para evitar fugas.
11. Vuelva a colocar la compuerta y
cierre la puerta de la bomba.
EL FILTRO DEL TUBO DE
ENTRADA Y EL FILTRO DE LA
VÁLVULA
Podría ser necesario limpiar los filtros
cuando:
El aparato no carga agua.
El aparato llena con agua durante
mucho tiempo.
El indicador del botón
4
parpadea
y la pantalla muestra la alarma co-
rrespondiente. Consulte "Solución
de problemas".
ADVERTENCIA
Desenchufe el aparato de la to-
ma de red.
Limpieza de los filtros de entrada de agua:
1. Cierre la toma de agua.
2. Retire las tomas de entrada de
agua de los grifos.
3. Limpie el filtro del tubo de entrada
con un cepillo rígido.
4. Retire el tubo de entrada situado
detrás del aparato.
5. Limpie el filtro de la válvula con un
cepillo rígido o una toalla.
45°
35°
6. Vuelva a colocar el tubo de entra-
da. Cerciórese de que las conexio-
nes están bien apretadas para evi-
tar fugas.
7. Abra el grifo.
DESAGÜE DE EMERGENCIA
Debido a una avería, el aparato no pue-
de desaguar.
Si esto ocurre, realice los pasos 1) a 6)
del apartado "Para limpiar la bomba de
desagüe".
Limpie la bomba si fuera necesario.
60
Vuelva a colocar el conducto de desa-
güe y cierre la compuerta de la bomba.
Cuando se desagua con el procedi-
miento de drenaje de emergencia, se
debe activar de nuevo el sistema de
desagüe:
1. Coloque 2 litros de agua en el
compartimento de lavado principal
del dosificador de detergente.
2. Inicie el programa para desaguar.
MEDIDAS ANTI
CONGELACIÓN
Si el aparato está instalado en una zona
donde la temperatura puede llegar a
ser inferior a 0 °C, retire el agua restan-
te del tubo de entrada y la bomba de
desagüe.
1. Desenchufe el aparato de la toma
de red.
2. Cierre la toma de agua.
3. Retire la manguera de entrada de
agua.
4. Coloque los dos extremos del tubo
de entrada en un recipiente y deje
que salga el agua.
5. Vacíe la bomba de descarga. Con-
sulte el procedimiento de desagüe
de emergencia
6. Cuando la bomba esté vacía, colo-
que de nuevo la manguera.
ADVERTENCIA
Asegúrese de que la temperatu-
ra es superior a 0 °C antes de
usar de nuevo el aparato.
El fabricante no se hace respon-
sable de los daños derivados de
las bajas temperaturas.
ESPAÑOL
61
SOLUCIÓN DE PROBLEMAS
El aparato no se pone en marcha o se
detiene durante el funcionamiento.
Primero, intente buscar una solución al
problema (consulte la tabla). Si no la
encuentra, póngase en contacto con el
servicio técnico.
Con algunos problemas, las señales
acústicas funcionan y la pantalla
muestra un código de alarma:
- El aparato no carga agua.
- El aparato no desagua.
- La puerta del aparato está
abierta o no está bien cerrada.
- El dispositivo anti inundación
se ha puesto en marcha.
ADVERTENCIA
Apague el aparato antes de rea-
lizar las comprobaciones.
Problema Causa posible Posible solución
El aparato no car-
ga agua.
La toma de agua está ce-
rrada.
Abra el grifo.
La manguera de entrada
de agua está dañada.
Compruebe que la manguera de
entrada de agua no está dañada.
Los filtros de la mangue-
ra de entrada de agua
está obstruido.
Limpie los filtros. Consulte el ca-
pítulo "Mantenimiento y limpie-
za".
El grifo está obstruido o
tiene incrustaciones cal-
cáreas.
Limpie el grifo.
La conexión de la man-
guera de entrada de
agua no es correcta.
Compruebe que la conexión es
correcta.
La presión de agua es in-
suficiente.
Póngase en contacto con la em-
presa de suministro de agua.
El aparato no de-
sagua.
La manguera de desa-
güe está dañada.
Compruebe que la manguera de
desagüe no está dañada.
El filtro de la bomba de
desagüe está obstruido.
Limpie el filtro de la bomba de
desagüe. Consulte el capítulo
"Mantenimiento y limpieza".
La conexión de la man-
guera de desagüe no es
correcta.
Compruebe que la conexión es
correcta.
Se ha ajustado un pro-
grama de lavado sin la
fase de desagüe.
Ajuste el programa de desagüe.
La función "Agua en la
cuba" está encendida.
Ajuste el programa de desagüe.
La puerta del apa-
rato está abierta o
no está bien cerra-
da.
Cierre la puerta correctamente.
62
Problema Causa posible Posible solución
El dispositivo anti
inundación se ha
puesto en marcha.
Desconecte la lavadora.
Cierre la toma de agua.
Póngase en contacto con el
servicio técnico.
La fase de centrifu-
gado no funciona.
La fase de centrifugado
está apagada.
Seleccione el programa de cen-
trifugado.
El filtro de la bomba de
desagüe está obstruido.
Limpie el filtro de la bomba de
desagüe. Consulte el capítulo
"Mantenimiento y limpieza".
Problemas de equilibrio
con la carga de la cola-
da.
Ajuste manualmente las prendas
en la cuba e inicie de nuevo la fa-
se de centrifugado.
El programa no se
pone en marcha.
El aparato no está bien
enchufado a la toma de
corriente.
Conecte el cable a la toma de
corriente.
Se ha fundido un fusible. Cambie el fusible.
No ha pulsado la tecla
4
.
Pulse la tecla
4
.
Está ajustado el inicio di-
ferido.
Para iniciar el programa de lava-
do de inmediato, cancele el ini-
cio diferido.
El bloqueo de seguridad
para niños está activado.
Desactive el bloqueo de seguri-
dad para niños.
Hay agua en el
suelo.
Fugas de los acopla-
mientos de los tubos de
agua.
Asegúrese de que los acopla-
mientos están apretados.
Fugas de la bomba de
desagüe.
Asegúrese de que el filtro de la
bomba de desagüe está apreta-
do.
La manguera de desa-
güe está dañada.
Compruebe que la manguera de
entrada de agua no está dañada.
No se puede abrir
la puerta del apa-
rato.
El programa de lavado
está en marcha.
Deje que termine el programa
de lavado.
Hay agua en el tambor. Seleccione el programa de des-
carga o de centrifugado.
La lavadora produ-
ce un ruido extra-
ño.
Nivel incorrecto del apa-
rato.
Ajuste el nivel del aparato. Con-
sulte el apartado "Instalación".
No ha retirado el emba-
laje o los pasadores de
transporte.
Retire el embalaje o los pasado-
res de transporte. Consulte el
apartado "Instalación".
La carga es muy peque-
ña.
Añada más colada en el tambor.
ESPAÑOL
63
Problema Causa posible Posible solución
El aparato se llena
de agua y desagua
inmediatamente.
El extremo de la man-
guera de desagüe está
demasiado bajo.
Asegúrese de que el tubo de de-
sagüe se encuentra en la posi-
ción correcta.
Los resultados del
lavado no son sa-
tisfactorios.
El detergente empleado
era insuficiente o no era
el adecuado.
Aumente la cantidad de deter-
gente o utilice otro diferente.
No ha eliminado las
manchas difíciles antes
de lavar las prendas.
Emplee productos especiales pa-
ra tratar las manchas difíciles.
Se ha ajustado la tempe-
ratura incorrecta.
Asegúrese de ajustar la tempera-
tura correcta.
Demasiada carga de co-
lada.
Reduzca la carga.
Una vez finalizada la revisión, conecte
el aparato. El programa continuará a
partir del punto en que se haya inte-
rrumpido.
Si el problema se vuelve a producir,
póngase en contacto con el servicio
técnico.
Si la pantalla muestra otros códigos de
alarma, diríjase al servicio técnico.
64
INSTALACIÓN
DESEMBALAJE
1. Utilice los guantes. Retire la pelícu-
la externa. Si es necesario, utilice
un cúter.
2. Retire la cubierta de cartón.
3. Retire los materiales del embalaje
de poliestireno.
4. Retire la película interna.
5. Abra la puerta. Retire la pieza de
poliestireno de la junta de la puer-
ta y todos los elementos del tam-
bor.
ESPAÑOL
65
6. Extienda uno de los materiales de
embalaje de poliestireno en el sue-
lo detrás del aparato. Baje con cui-
dado el aparato sobre el lado pos-
terior. Tenga cuidado para no da-
ñar los tubos.
1
2
7. Retire la protección de poliestireno
de la base.
8. Levante el aparato hasta la posi-
ción vertical.
9. Retire el cable de alimentación y el
tubo de desagüe de los soportes
de los tubos.
10. Suelte los tres pernos. Utilice la lla-
ve suministrada con el aparato.
11. Extraiga los separadores de plásti-
co.
66
12. Coloque tapones de plástico en los
orificios. Encontrará los tapones en
la bolsa del manual de instruccio-
nes.
ADVERTENCIA
Retire todo el embalaje y los pa-
sadores de transporte antes de
instalar el aparato.
Se recomienda guardar el em-
balaje y los pasadores de trans-
porte para cuando traslade el
aparato.
COLOCACIÓN Y NIVELADO
x4
Instale la lavadora en el suelo sobre
una superficie plana y rígida.
Asegúrese de que las moquetas no
impidan la circulación de aire por de-
bajo del electrodoméstico.
Cerciórese de que el aparato no en-
tra en contacto con la pared u otros
armarios de cocina.
Afloje o apriete las patas para ajustar
el nivel. El ajuste correcto del nivel
del aparato evita vibraciones, ruidos
y el movimiento del aparato cuando
está funcionando.
El aparato debe estar nivelado y es-
table.
PRECAUCIÓN
No coloque cartón, madera ni
materiales equivalentes bajo las
patas del aparato para ajustar el
nivel.
ESPAÑOL
67
EL TUBO DE ENTRADA
35
O
35
O
35
O
45
O
45
O
45
O
Conecte el tubo al aparato. Gire el
tubo de entrada solo a la derecha o a
la izquierda. Suelte la tuerca anular
para ajustarla en la posición correcta.
Conecte el tubo de entrada de agua
fría a una toma de agua fría con rosca
de 3/4.
PRECAUCIÓN
Asegúrese de que no haya fu-
gas de los acoplamientos.
No utilice ningún tubo de ex-
tensión si el tubo de entrada es
demasiado corto. Póngase en
contacto con el servicio técnico
para cambiar el tubo.
Dispositivo antifuga
A
El tubo de entrada tiene un dispositivo
antifuga. Este dispositivo evita las fugas
de agua del tubo por el desgaste nor-
mal. El sector rojo de la ventana «A»
muestra este fallo.
Si esto ocurre, cierre el grifo de agua y
póngase en contacto con el servicio
técnico para cambiar el tubo.
68
DESAGÜE
Hay distintos procedimientos para co-
nectar el tubo de desagüe:
Con la guía de plástico.
En el borde de un fregadero.
Asegúrese de que la guía de plástico
no se mueva cuando el aparato desa-
gua. Acople la guía al grifo de agua
o a la pared.
A un tubo vertical con orificio de ven-
tilación.
Consulte la ilustración. Directamente
en un tubo de desagüe a una altura
mínima de 60 cm y máxima de 100
cm. El extremo de la manguera de
desagüe debe quedar siempre al ai-
re; es decir, el diámetro interior de la
tubería de desagüe debe ser mayor
que el diámetro exterior del tubo de
desagüe.
Sin la guía de plástico.
•A un desagüe.
Consulte la ilustración. Coloque el tu-
bo de desagüe en el sumidero y ase-
gúrela con una brida. Asegúrese de
que el tubo de desagüe realiza un
bucle para evitar que las partículas
restantes entren en el aparato desde
el fregadero.
ESPAÑOL
69
Directamente a un tubo de desagüe
integrado en la pared de la habita-
ción y apretando con una brida.
Puede extender el tubo de de-
sagüe hasta un máximo de 400
cm. Póngase en contacto con el
servicio técnico para el otro tu-
bo de desagüe y la extensión.
70
ESPAÑOL
71
www.aeg.com/shop 132942891-A-272011
1 / 1

AEG L75280FL Manual de usuario

Categoría
Lavadoras
Tipo
Manual de usuario
Este manual también es adecuado para

En otros idiomas