Transcripción de documentos

CDC-655/555 Natural Sound Compact Disc Player Thank you for selecting this YAMAHA Compact Disc Player. OWNER’S MANUAL CONTENTS Safety Instructions......................................... 2 Features ........................................................ 4 Connections .................................................. 5 Identification of Components......................... 6 Basic Operation............................................. 8 Random-Sequence Play ............................. 13 Program Play............................................... 14 Repeat Play................................................. 16 Index Search ............................................... 16 CD Synchronized Recording ...................... 17 Track Programming for Recording to Tape for CDC-655 only ....................................... 18 Notes about the Remote Control Transmitter ..... 22 Notes about Handling Compact Discs ........ 22 Troubleshooting ........................................... 23 Specifications .............................................. 23  SAFETY INSTRUCTIONS 9 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Heat – The unit should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat. 10 Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 11 Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. 12 Cleaning – The unit should be cleaned only as recommended by the manufacturer. 13 Nonuse Periods – The power cord of the unit should be unplugged from the outlet when left unused for a long period of time. 14 Object and Liquid Entry – Care should be taken so that objects do not fall into and liquids are not spilled into the inside of the unit. 15 Damage Requiring Service – The unit should be serviced by qualified service personnel when: A. The power-supply cord or the plug has been WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. damaged; or B. Objects have fallen, or liquid has been spilled into the unit; or C. The unit has been exposed to rain; or 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. D. The unit does not appear to operate normally or 2 Retain Instructions – The safety and operating instructions should be retained for future reference. E. The unit has been dropped, or the cabinet damaged. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to. 4 Follow Instructions – All operating and other instructions should be followed. 5 Water and Moisture – The unit should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. 6 Carts and Stands – The unit should be used only with a cart or stand that is recommended by the manufacturer. 6A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 2 7 Wall or Ceiling Mounting – The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. 8 Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. exhibits a marked change in performance; or 16 Servicing – The user should not attempt to service the unit beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel. 17 Power Lines – An outdoor antenna should be located away from power lines. 18 Grounding or Polarization – Precautions should be taken so that the grounding or polarization is not defeated. IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No.: The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference  CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 2 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain and water. 3 Do not operate the unit upside-down. It may overheat, possibly causing damage. 4 Never open the cabinet. If a foreign object drops into the set, contact your dealer. 5 Do not use force on switches, knobs or cords. When moving the set, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 9. To prevent damage by lightning, disconnect the power cord from the household AC outlet during an electrical storm. 10. When disconnecting the power cord from the household AC outlet, grasp the plug; do not pull the cord. 11. When moving the unit, be sure to first disconnect the power cord from the household AC outlet, and disconnect cords connected to other equipment. CAUTION FOR CARRYING THIS UNIT Be sure not to carry or tip the unit with discs remaining in it. CAUTION FOR MOVING THIS UNIT When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display indicates as follows. 6 Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. 7 Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty. 8. Do not place another component on top of this unit, because to do so will discolor or damage the surface of the unit. Never switch off the power if the display is not pictured as above, otherwise the unit will get out of order during moving because the internal mechanism is not locked. WARNING CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. DANGER Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. DANGER: The use of optical instrument with this product will increase eye hazard. Laser Diode Properties • Material: GaAlAs • Wavelength: 780nm • Emission Duration: continuous • Laser Output: max. 44.6µW* * This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pickup Block. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only. The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off. We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels. 3  FCC INFORMATION 1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures: 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. Relocate either this product or the device that is being affected by the interference. 3. NOTE : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. FEATURES ● 5-Disc Carousel Auto-changer ● Full Opening Disc Tray for Changing 5 Discs at a Time ● PLAYXCHANGE; Disc Changing Capability while Playing Another ● Random Access Programmable Play ● Random-Sequence Play ● Single Track/Entire Disc/All Disc Repeat Play ● Display Brightness Changing Capability ● Remote Control Capability 4 ● Disc Scanning Capability Useful for Disc Searching or Disc Checking ● CD Synchronized Recording with a Compatible YAMAHA Tape Deck CDC-655 only ● Automatic Programming for Recording to Tape ● Automatic Peak Level Searching Capability ● Optical Digital Output  CONNECTIONS ● ● Before making any connections, switch OFF the power to the unit and the amplifier or other component. Connections should be made to the correct input terminals of the amplifier or other component. ● If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other. CDC-555 LINE OUT L R To AC outlet CDC-655 LINE OUT L DIGITAL AUDIO OUT OPTICAL R To AC outlet ➋ ➊ Optical fiber cable (not included) Connection cord (included) Amplifier OPTICAL CD DIGITAL IN Choose one of the ways listed below to connect this unit to your amplifier. When the LINE OUT (analog) terminals of this unit are used ( ➊ ) ● ● ● Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used. CDC-655 only Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL buttons. CDC-655 only When the DIGITAL AUDIO OUT (OPTICAL) terminal of this unit is used ( ➋ ) ● ● ● ● ● Before using this terminal, remove the terminal’s cover by pulling it. Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable. * Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly. Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust. Set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL buttons. This terminal can also be connected to the optical input terminal of a digital audio tape deck (DAT) etc. to record CD onto tape directly. 5  IDENTIFICATION OF COMPONENTS * ( ) indicates the page number on which the control part is best described. FRONT PANEL * Control functions other than shown below are the same with the corresponding ones on the remote control transmitter. * The PLAY/PAUSE button on the main unit has both the functions of the PLAY button and the PAUSE button on the remote control transmitter. * The SKIP/SEARCH button on the main unit has both the functions of the SKIP buttons and the SEARCH buttons on the remote control transmitter. CDC-655 PHONES jack (p. 12) POWER switch (p. 8) PLAYXCHANGE button (p. 9) Disc tray (p. 8) DISC-select buttons (p. 8) NATURAL SOUND COMPACT DISC PLAYER PLAYXCHANGE OPEN/CLOSE PLAY/ PAUSE STOP I PROG DISC 3 2 4 SKIP/SEARCH 5 POWER PHONES OUTPUT LEVEL +I0 I 2 3 4 5 6 7 8 9 0 DOWN UP PEAK PEAK button (p. 21) Display panel Remote control sensor (p. 22) OUTPUT LEVEL control (p. 12) (“UP” is identical with “+” and “DOWN” with “–” of the OUTPUT LEVEL buttons on the remote control transmitter.) CDC-555 POWER switch (p. 8) PLAYXCHANGE button (p. 9) Disc tray (p. 8) DISC-select buttons (p. 8) NATURAL SOUND COMPACT DISC PLAYER PLAYXCHANGE STOP I 2 DISC 3 POWER Display panel Remote control sensor (p. 22) 6 4 5 OPEN/CLOSE PLAY/ PAUSE SKIP/SEARCH  * ( ) indicates the page number on which the control is best described. REMOTE CONTROL TRANSMITTER CDC-655 DIMMER button (p. 12) TAPE TAPE button (p. 18) CDC-555 CLEAR CLEAR button (p. 15) TIME button (p. 11) OPEN/CLOSE DIMMER TIME REPEAT RANDOM REPEAT button (p. 16) OPEN/CLOSE button (p. 8) PROG PROG button (p. 14) RANDOM button (p. 13) 1 2 3 MODE 4 5 6 +10 7 8 9 0 Disc play MODE-select button (p. 8) Numeric buttons (p. 10) DISC SCAN button (p. 11) DISC SKIP PAUSE button (p. 9) DISC SCAN DISC SKIP buttons (p. 8) SKIP PAUSE PLAY SEARCH INDEX STOP SKIP buttons (p. 10) PLAY button (p. 8) SEARCH buttons (p. 10) STOP button (p. 9) – OUTPUT LEVEL SYNCHRO button (p. 17) + SYNCHRO INDEX button (p.16) CDC-655 only OUTPUT LEVEL buttons (p. 12) 7  This manual describes how to operate this unit by using the remote control transmitter. To operate this unit on the front panel, use the corresponding buttons on the front panel. BASIC OPERATION CDC-555 CDC-655 2, 3 OPEN/CLOSE TAPE PROG 1 TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 8 9 0 7 5 DIMMER DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP OPEN/CLOSE PROG 4 CLEAR 5 5 DIMMER TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 8 9 0 7 DISC SKIP 4 1 2, 3 4 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP 5 Select the disc play mode (1DISC or 5DISC) while watching the display. POWER 1DISC 5DISC MODE Shows the selected disc mode. “1DISC” mode: “5DISC” mode: 2 Label side upward 5 The unit will play a designated disc only. The unit will play all discs in the tray in sequence. Start play from the first track of the disc 1. OPEN/CLOSE PLAY Disc tray 3 * If necessary, select a desired disc by using the DISC SKIP buttons or a DISC-select button. 2 DISC SKIP Close the disc tray DISC 3 4 or OPEN/CLOSE (On the front panel) PLAY To turn off the power Press the POWER button again. 8  Notes ● After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds. Display information at disc play ➀ ➁ ➂ ➃ 5DISC REMAIN 5DISC 3 4 5 6 7 8 9 10 11 12 TOTAL 1 2 3 4 5 6 7 8 9 10 11 12 ● Additionally, you can close the disc tray by pressing the PLAY(PLAY/PAUSE) button, a DISC-select button on the front panel, a numeric button or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time of the first selected disc. PLAYXCHANGE During play, you can open the disc tray by pressing the PLAYXCHANGE button on the front panel without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect. To stop play temporarily PLAY/ PAUSE PAUSE ➄ ➅ ➀ ➁ ➂ ➃ Encloses the tray number of the selected disc. Shows the tray numbers with discs. Shows the selected track number. Shows the time displays. (Refer to “Selecting time displays” on page 11.) ➄ Displays the numbers that correspond to the numbers of the tracks (as high as number 20) on the selected disc. After each track is played, its corresponding number disappears so the number of remaining tracks (and their numbers) can be seen at a glance. CDC-655 only ➅ Shows the level of signals output into an amplifier or the headphone level adjusted by using the OUTPUT LEVEL buttons. To stop play completely STOP or To resume play, press the PAUSE button again (or press the PLAY button). * The PLAY/PAUSE button on the front panel can also be used to stop play temporarily or to resume play. 9  To play a desired track on the disc DIRECT PLAY SKIP PLAY Select a desired track by using the numeric buttons. To play from the beginning of the track following the one now playing SKIP 5 To play from the beginning of the track now playing SKIP 1DISC The selected track number is displayed. 5 6 7 8 9 10 11 12 To play from the beginning of the track before the one now playing Example: To select track 25 Press ➀ twice, then immediately press ➁ once. 10 SKIP 5 ➀ ➁ * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. ● • (Twice) These operations can also be performed when the unit is paused or stopped. When using the SKIP buttons on the remote control transmitter: If a button is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using the SKIP/SEARCH button on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly ● SEARCH ● (Press and hold.) To reverse rapidly SEARCH (Press and hold.) 10 ● The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. When using the SKIP/SEARCH button on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the track.  Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed while this unit is stopped, this unit will play an early part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you hear a disc that you want to listen to in entirely, press the DISC SCAN button once again or press the PLAY button to cancel this function. The unit will enter into the normal play mode. Notes During this play, the disc tray numbers flash on and off on the display. Every time the play of a disc is finished, the corresponding tray number is changed from flashing to lighting. ● DISC SCAN ● There might be cases that you will hear no sound during disc scan. An example of this would be if the disc being played has a long blank space between tracks. Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button. ➀ ➃ Elapsed time of the track now playing Total remaining time on the disc 5DISC 5DISC TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 TIME ➁ Remaining time of the track now playing 5DISC ➂ Total disc play time 5DISC TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 Note The remaining time ➁ will not be displayed if the track number is 21 or higher. 11  Changing brightness of the display You can change the brightness of the display by pressing the DIMMER button. Normal illumination DIMMER Slightly dim Dim CDC-655 only CDC-655 only Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL buttons. When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons. * Note that the use of the OUTPUT LEVEL buttons will also vary the level of the signal output to an amplifier, etc. OUTPUT LEVEL DOWN – OUTPUT LEVEL + UP or PHONES (On the front panel) * When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max. * The level of output signals can be checked on the display. 12  RANDOM-SEQUENCE PLAY You can play the tracks in a random sequence (up to 99 tracks). The unit will automatically mix up tracks from all discs or any desired disc in the disc tray. CDC-555 CDC-655 2 OPEN/CLOSE DIMMER TIME PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 2 4 3 1 3 OPEN/CLOSE DIMMER TIME PROG CLEAR REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 4 3 Select whether to play one disc or all discs in the tray. MODE * If the “1DISC” disc play mode is selected, next select a desired disc by using the DISC SKIP buttons or a DISCselect button. 2 4 Close the disc tray. RANDOM OPEN/CLOSE To cancel random-sequence play Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button. Notes This feature will not function during programming, or during programmed play. ● ● ● ● If the SKIP button is pressed during randomsequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. 13  PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or more discs in any desired order using programmed play. CDC-555 CDC-655 2 4 PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 8 9 0 7 3 2 4 3 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL 5 1 + SYNCHRO 1 PROG CLEAR REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP 5 1 SYNCHRO 4 Stop the unit. Select the desired track. STOPSTOP 5 2 * Repeat steps 3 – 4 to program more tracks. PROG 5 When the programming is completed; PLAY 3 If necessary, select the desired disc. DISC 3 2 DISC SKIP 4 or (On the front panel) Display information during programming ➁ ➂ ➃ PROG TOTAL ➁ ➂ PROG TOTAL 6 ➃ 14 ➀ ➀ Shows the program number for the track to be programmed next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks on the selected disc. * If “P-01” does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed.  Notes ● You can program as many as 40 tracks at one time. ● If you choose to perform programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. ● You can program a whole disc by pressing “0”, instead of one track. At that time, “AL” flashes in the display. ● If you will program tracks from more than one disc, before you press the PROG button, check the total recorded time of each disc on the disc tray by pressing the DISC SKIP button in turn. Without this operation, the total time of the programmed tracks will not be displayed during programming. ● ● ● ● The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) buttons can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) buttons can be used during playing to search through all tracks, including unprogrammed tracks. To stop program play To check programmed data Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. 1. If during program play, press the STOP button. 2. Press the PROG button. 3. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To cancel a programmed sequence There are several methods, as described below. ● Press the STOP button while the unit is stopped. ● Open the disc tray. ● Switch off the power. ● CDC-555 only Press the CLEAR button while the unit is stopped. To correct programmed data 1. Follow the procedure described in “To check programmed data”. 2. Display the track number to be corrected by pressing the SKIP button. 3. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. 4. After the correction has been completed, press the PROG button or PLAY button once again. 15  REPEAT PLAY You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. SINGLE REPEAT (REP S) A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. (If the repeat play mode is switched off, the programmed-play mode or the randomsequence play mode will be resumed.) (OFF) REPEAT FULL REPEAT (REP F) REP S In the “1DISC” disc play mode: A designated disc is played repeatedly played. In the “5DISC” disc play mode: All discs in the disc tray are repeatedly played. REP F * In the programmed-play mode, all programmed tracks are repeatedly played. * In the random-sequence play mode, all randomly sequenced tracks are repeatedly played in the same order. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. 1 To cancel the index search function Select a track which has index numbers. Press the INDEX button. 5 2 INDEX INDEX 6 7 8 9 10 11 12 3 Select the desired index number. 3 INDEX 6 7 8 9 10 11 12 16 Notes ● Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. ● If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. ● For some discs, play may begin slightly prior to the actual designated index point. ● If the disc has no encoded index points, play will begin from the start of the selected track. ● The index number can be designated only while the INDEX number display is illuminated.  CD SYNCHRONIZED RECORDING This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time. CDC-555 CDC-655 OPEN/CLOSE 1 4 3 1 DIMMER TIME PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 OPEN/CLOSE 4 DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL 5 + SYNCHRO 4 Select the disc. TIME PROG CLEAR REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 1 4 3 DISC SKIP DIMMER 4 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP 5 SYNCHRO If desired, select the track to be recorded first. SKIP 5 DISC SKIP or 2 Load a tape on the tape deck. CDC-655 only * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 5 PLAY Both CD play and tape deck recording begin. * CD play begins a little later than recording. 3 6 SYNCHRO If you want to stop recording temporarily and restart recording from a desired track, follow steps 3–5 again. To cancel this function Press the STOP button. This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode. * In this mode, the time display on this unit flashes on and off. Notes • To finish or stop the recording, press the “STOP” button on the tape deck. • Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to page 14–15 for the programming procedure.) CDC-655 only • This function can also be used together with the automatic tape-programming function. (Refer to page 18–20.) 17  TRACK PROGRAMMING FOR RECORDING TO TAPE for CDC-655 only This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. 4 ■ Automatic tape programming This is for recording only the tracks which best fit onto a tape. 2 1 2 4 TAPE DIMMER TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 STOP 6 5 8 7, 8 1 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP 6 Stop the unit. REPEAT * By pressing the REPEAT button, the unit automatically programs tracks for side A and side B separately considering the tape’s total time. Select the disc. DISC SKIP 3 OPEN/CLOSE PROG 7 8 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) Enter the tape’s total possible recording time. TAPE Begin recording on the tape deck and press the PLAY button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes ● All tracks may not be programmed if the tape’s length is not enough. To program all tracks, use a longer tape. ● In step 6, you can check the program data for side A and side B. ➁ ➀ You can select any of four tape lengths by pressing the TAPE button. PROG TOTAL 1 2 3 4 5 ➂ TAPE (off) ➀ ➁ ➂ 5 18 Otherwise, you can also enter the tape’s total possible recording time manually. Example: For a C-64 tape (32 minutes on each side) 6 4 ➀ ➁ ● Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 7 and 8, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.)  ■ Manual tape programming OPEN/CLOSE This is for recording desired tracks selected from one or more discs in any desired order onto tape. 4, 11 8 2, 5 TAPE PROG DIMMER TIME REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL SYNCHRO 1 Stop the unit. 9 STOP 10 2 3 11 Follow step 4 and 5 on page 18. 6 7 12 PROG If necessary, select the desired disc. 13 DISC SKIP Select the desired track. 5 Repeat step 5 and 6 to program more tracks for side A of the tape. You can select the same track again. * If “E rr” appears in the display, the track number just selected cannot be programmed because there is not enough time remaining on side A of the tape. 8 Repeat step 5 and 6 to program more tracks for side B of the tape. You can select the same track again. The peak level searching function of this unit is useful for adjusting recording level on the tape deck. For peak level searching, when the programming for side B is finished, press the PROG button and then press the PEAK button on the front panel. PROG TOTAL REMAIN 5 Follow step 5 and 6. * If “E rr” appears in the display, the track number just selected cannot be programmed because there is not enough time remaining on side B of the tape. If you will program tracks from more than one disc on the disc tray, make this unit display the total recorded time of each disc to be used in turn by pressing the DISC SKIP button. * This unit will read the contents of a disc by this operation. If there is a disc to which this operation is omitted, tracks on the disc cannot be programmed. 4 + 4, 6 13 12, 13 1 Begin recording on the tape deck and press the PLAY button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. Notes In step 7 and 10, even if “E rr” appears in the display, you can program another track of which time is shorter than the remaining time on the side of the tape. In this case, you can check the remaining time on the side of the tape by pressing the TIME display mode-select button. ● CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 12 and 13, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.) ● Notes on tape programming To check, cancel or correct program data, refer to page 15. ● The maximum number of tracks that can be programmed is 40. If, however, the PAUSE mode is inserted, it is counted as one track. ● This function can be used to program up to track number 20. If the disc has more than 20 tracks, track number 21 and thereafter will not be programmed. ● After you finish the programming for side A, program the pause mode by pressing the TAPE button. TAPE * “Pu” flashes in the display, and after then you can begin programming for side B. 19  ➀ Display information during programming ➁ ➂ ➃ PROG TOTAL REMAIN 1 2 3 4 5 6 7 8 9 10 Shows the side of the tape and the program number for the track to be programmed next. Shows the selected disc and track number. Shows the total remaining time on the side of the tape. Programmed track numbers light up and programmable track numbers among the unprogrammed ones flash on and off. * If “A-01” does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. ➀ ➂ ➁ PROG TOTAL REMAIN 1 2 3 4 5 6 7 8 9 10 ➃ ■ Random sequential tape programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 8 9 0 7 2 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL 3, 4 4 + SYNCHRO 1 2 Follow step 1 – 5 on page 18. RANDOM Notes ● Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly. ● If the tape’s length is not enough, all tracks cannot be programmed. In this case, exchange the tape for a longer one. ● In step 2, you can check the program data for side A and side B. ➀ * The unit will automatically program tracks for side A and side B separately considering the tape’s total time. ➁ PROG TOTAL 3 4 1 Begin recording on the tape deck and press the PLAY button on this unit at the same time. The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit. 5 7 ➂ ➀ ➁ ➂ ● 20 3 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A. Shows the total time of programmed tracks for each side. Shows the programmed track numbers for each side. CD synchronized recording function can be used if your tape deck is compatible with it. In this case, in step 3 and 4, press the SYNCHRO button and then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins. (For details, refer to page 17.)  Automatic searching for the peak level on a disc This convenient feature automatically searches for the part on a disc where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. 3 PROG TAPE REPEAT RANDOM 1 2 3 MODE 4 5 6 +10 7 8 9 0 2 DISC SKIP DISC SCAN SKIP PAUSE PLAY SEARCH INDEX STOP – OUTPUT LEVEL + 1 4 SYNCHRO 1 4 Stop the unit. 0 STOP PEAK 2 Select the “1DISC” disc play mode. MODE 1DISC PROG INDEX TOTAL REMAIN 1DISC 10 11 12 The peak level searching is performed through the disc. 3 Select the disc. DISC SKIP 1DISC REP 8 9 10 11 12 1DISC REP 8 9 10 11 12 Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play. To cancel this function Press the STOP button. Notes • Even if the peak level searching is performed twice or more on the same disc, the same part will not be always selected, because this unit will search for the peak level among parts on the disc that are randomly selected by the internal microcomputer. • • In the program play mode, this feature will function among the programmed tracks only. If program play is being performed, first press the STOP button, and then press the PEAK button. If program play is not being performed, only press the PEAK button. To search for the peak level through all discs on the disc tray, in step 2, select the “5DISC” disc play mode. 21  NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Remote control transmitter operation range CDC-555 1 CDC-655 3 Remoto control sensor 2 Within approximately 6 m (19.7 feet) 30° Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement. ● Be sure the polarities are correct. (See the illustration inside the battery compartment.) ● Remove the batteries if the remote control transmitter will not be used for an extended period of time. ● If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries. 30° Notes ● There should be no large obstacles between the remote control transmitter and the main unit. ● If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter to not work correctly. In this case, reposition the main unit to avoid direct lighting. NOTES ABOUT HANDLING COMPACT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs. ● To remove a disc from its storage case, open the case and then press down at the center; with a finger through the center hole and the outer edges held as shown in the illustration, lift the disc out carefully. ● ● Compact discs are not affected by small particles of dust or fingerprints on their playing surface, but even so they should be kept clean. Wipe by using a clean, dry cloth. Do not wipe with a circular motion; wipe straight outward from the center. ,,, , , ● Do not try to clean the disc's surface by using any type of disc cleaner, record spray, anti-static spray or liquid, or any other chemical-based liquid, because such substances might irreparably damage the disc's surface. ● Do not expose discs to direct sunlight, high temperature or high humidity for a long period of time, because these might warp or otherwise damage the disc. Always handle the disc with care so that its surface is not scratched. NO! ● Compact discs are not subjected to wear during play, but damage to the disc surface when the disc is being handled can adversely affect the disc's play. To play a 3-inch (8-cm) CD Place it in the inner recessed area of the disc tray. Do not put a normal (5-inch/12-cm) CD on top of a 3-inch CD. 22  TROUBLESHOOTING If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and contact your authorized YAMAHA dealer or service center for assistance. SYMPTOM REMEDY PROBABLE CAUSE The player does not switch ON when the POWER switch is pressed. The power cord is not connected or not completely connected. Securely connect the power cord. The disc tray does not close completely. A foreign object is obstructing the tray. Carefully check the disc tray and remove the foreign object. A disc number does not light up in the display. The disc has been loaded upside down. Load the disc correctly. The disc is damaged. Check the disc carefully; replace it if necessary. There is moisture on the laser pickup. Wait 20 to 30 minutes after switching the unit ON before trying to play a disc. The disc has been loaded upside down. Reload the disc with the label side up. The disc is dirty. Clean the disc. Play is delayed, or begins at the wrong place. The disc may be scratched or damaged. Check the disc carefully; replace it if necessary. No sound. Improper output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Improper amplifier operation. Set the amplifier controls to the correct input selection. This unit is being subjected to vibrations or impacts. Relocate this unit. Play does not begin. Sound “skips”. The disc is dirty. Clean the disc. Sound “hums”. Improper cable connections. Securely connect the audio cables. If the problem persists, the cables may be defective. Noise from a nearby tuner. The tuner is too close to this unit. Move the tuner and this unit farther apart. Noise from inside of the disc tray. The disc may be warped. Replace the disc. The remote control transmitter does not work. The batteries of this remote control transmitter are too weak. Replace the batteries with new ones. Direct sunlight or lighting (of an inverter type of fluorescent lamp etc.) is striking the remote control sensor of the main unit. Change position of the main unit. SPECIFICATIONS AUDIO SECTION GENERAL Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB Harmonic distortion+noise (1 kHz) <CDC-655> .................................................. 0.003% or less <CDC-555> ...................................................0.004% or less S/N ratio <CDC-655> ................................................. 106 dB or more <CDC-555> ..................................................102 dB or more Dynamic range <CDC-655> ................................................... 96 dB or more <CDC-555> ....................................................95 dB or more Wow & flutter ................................................... Unmeasurable Output voltage .......................................................... 2.0±0.5V Headphones output (–20 dB) .............. 200±40 mV/150 ohms Power requirements U.S.A. and Canada models ............................ 120V, 60 Hz Australia and U.K. models ............................. 240V, 50 Hz Europe model ..................................................230V, 50 Hz General model ...................... 110/120/220/240V, 50/60 Hz Power consumption ........................................................ 20W Dimensions (W x H x D) ......................... 435 x 106 x 388 mm (17-1/8” x 4-3/16” x 15-1/4”) Weight <CDC-655> .......................................... 5.6 kg (12 lbs. 5 oz.) <CDC-555> .........................................5.4 kg (11 lbs. 14 oz.) Accessories .................................................. Connection cord Remote control transmitter Batteries (size AA, R6,UM-3) Please note that all specifications are subject to change without notice. 23  YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA