Sharp 32C230 Manual de usuario

Categoría
Televisores CRT
Tipo
Manual de usuario

Este manual también es adecuado para

1
Dimension: 140mm x 215mm
COLOR TELEVISION
MODEL
32C230
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TA R
®
is a
U.S.
registered
trademark.
CONTENTS
PAGE
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................... 2–4
Supplied Accessories ............................................... 5
Before Operating Your Television .............................. 5
Antenna Connections ........................................... 5, 6
Quick Reference Control Operation ......................... 7
EZ SETUP during First Use ..................................... 8
Demo Mode .............................................................. 9
Accessing the MAIN MENU screen without
Remote Control ........................................................ 9
Language ............................................................... 10
Sleep Timer ............................................................ 10
Video Adjust ........................................................... 11
Audio Select ..................................................... 12, 13
MTS (Multichannel TV Sound) ............................ 12
AUDIO ADJUST ................................................. 13
This operation manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 40–44.
FRENCH is on page 45–49.
PAGE
Closed Caption ....................................................... 14
Parent Control .................................................. 15–25
V-CHIP Operation ......................................... 15–22
VIEW TIMER ................................................ 23–25
Energy Save ........................................................... 26
Set Up .............................................................. 27–33
EZ Setup ............................................................. 27
Channel Setting ............................................ 28–30
Blue Screen .................................................. 30, 31
Auto Input ............................................................... 32
CH/Input ID....................................................... 33, 34
Screen Format........................................................ 35
Using the Video and Audio Input Terminals ...... 36, 37
Before Calling for Service ....................................... 38
Calling for Service .................................................. 38
Specifications ......................................................... 39
Limited Warranty .................................................... 50
A709 WJ
P
O
W
E
R
L OPERATION MANUAL L
32C230(01-04) 13/3/03, 12:31 PM1
2
Dimension: 140mm x 215mm
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR
®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1
billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR
®
models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR
®
models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to
eliminating the pollution from more than one million cars.
By using ENERGY STAR
®
products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installers attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
32C230(01-04) 13/3/03, 12:31 PM2
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the users authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
CAUTION: Do not place the AC power cord under the TV set or other heavy items.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturers instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
32C230(01-04) 13/3/03, 12:31 PM3
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NECNATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
32C230(01-04) 13/3/03, 12:31 PM4
5
Dimension: 140mm x 215mm
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
RRMCG1324CESC
Note:
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are
unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
If the set is not going to be used for a long period, such as during a vacation, unplug the set from the
wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the
radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Inserting the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two
batteries (size AA). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Antennas
The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
Antenna Connections
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75-ohm system is generally a round cable with
F-type connector that can easily be attached to
a terminal without tools (not supplied).
2. A 300-ohm system is a flat twin-lead cable that
can be attached to a 75-ohm terminal through a
300/75-ohm ADAPTOR (not supplied).
TV
32C230(05-06) 13/3/03, 12:31 PM5
6
Dimension: 140mm x 215mm
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
A position on the RF switch (not supplied) : You can view all unscrambled channels using the TVs
channel keys.
B position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converters channel keys.
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
OUTDOOR ANTENNA CONNECTION
Refer to one of the following two diagrams when connecting to an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
REAR PANEL
A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna
Antenna Connections (Continued)
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR PANEL
OUT
A
IN
B
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector
75-ohm coaxial cable
When connecting the RF cable to the TV set, do not
tighten F-type connector with tools.
If tools are used, it may cause damage to your TV
set.
(The breaking of internal circuit, etc.)
F-type connector should be finger-tightened only.NOTICE
32C230(05-06) 13/3/03, 12:31 PM6
7
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Front Panel
Quick Reference Control Operation
TV
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
Changes or selects the TV
adjustments on On-Screen Displey.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
4 seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
See pages 28–30 for Channel
Setting.
• Moves the E ” mark on the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
When sound is muted, CLOSED
CAPTION appears if available.
INPUT
Press Switches to external video
INPUT 1 mode.
Press twice Switches to external video
INPUT 2 mode.
Press 3 times Switches to external
video INPUT 3 mode.
Press 4 times Switches back to the
original TV mode. See page 37.
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
VIDEO/AUDIO
TERMINALS
IN 2
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
POWER
Press On.
Press again Off.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
REMOTE CONTROL
SENSOR
INSIDE DOOR
32C230(07) 14/3/03, 10:58 AM7
8
Dimension: 140mm x 215mm
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See pages 5, 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE screen will be
displayed.
2 Press CH 8/9 to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
3 Press VOL +/ to access the EZ SETUP screen.
4 Press VOL +.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL – and it will be canceled.
If you want to SET UP again, please refer to page
27 on SET UP.
To cancel EZ SETUP
Press VOL –.
5 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to page 28–30 for more
information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more
information on manually memorizing the channels using CHANNEL SETTING.
SELECT
ENGL I SH
FRANCA I S
SELECT : CH
SET : VOL
+
/
/
ESPAÑOL
LANGUAGE
SELECT
ENGL I SH
FRANCA I S
SELECT : CH
SET : VOL
+
/
/
ESPAÑOL
LANGUAGE
START
STOP START
SETUP?EZ
OR CAB L E.CONNECT ANT ENNA
STOP START
PLEASE WAI T
125
AUTO PROGRAMMI NG
2
CH
CH
POWER
TV
(EZ SETUP screen)
EZ SETUP during First Use
(On the Set)
POWER
(On the Remote Control)
(SELECT LANGUAGE screen)
(START)
(STOP)
POWER
CHANNEL
UP (a)/
DOWN (s)
VOLUME
(
k
)/(
l
)
32C230(08-09) 14/3/03, 10:59 AM8
9
Dimension: 140mm x 215mm
Demo Mode
To learn more about the TV set, you can enter DEMO mode. Simply
press and hold MENU on the TV set for more than 3 seconds.
To cancel DEMO mode, again press MENU on the TV set for more
than 3 seconds.
Example:
DEMO mode display
Accessing the MAIN MENU screen without Remote Control
If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen by pressing MENU on the TV set.
Some features of your TV set are not accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service
Center for a replacement.
(On the Set)
(On the Set)
MENU
button
MENU
button
32C230(08-09) 13/3/03, 12:31 PM9
10
Dimension: 140 X 215 mm
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the “[” mark to “SET UP”.
3 Press VOL
+
/
to access the SET UP screen, then press CH 8/9
to
move the “[” mark to “LANGUAGE”.
4 Press VOL
+
/
to access the LANGUAGE select screen.
5 Press CH 8/9 to select “ENGLISH”, “ESPAÑOL (SPANISH)” or
“FRANCAIS (FRENCH)”.
6 Press MENU to exit.
Sleep Timer
You can preset your television to turn off automatically in increments of 30, 60, 90, or 120 minutes.
1 Press MENU to access the MAIN MENU screen.
2 Press VOL
+
/
to access the SLEEP TIMER screen.
3 Press VOL
+
/
to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Note:
To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”
during step 3.
While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER
turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a
similar display for each remaining minute and a 10-second display right before shutting off the TV.
If you turn the POWER OFF, the SLEEP TIMER will automatically reset.
Language
(SLEEP TIMER screen)
(LANGUAGE select screen)
(MAIN MENU screen)
(SET UP screen)
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
ENGL I SH
FRANCA I S
ESPAÑ OL
LANGUAGE
ENGL I SH
FRANCA I S
ESPAÑ OL
IDIOMA
SLEEP T IMER
120M REMAIN
BL UE SCREEN
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
SET UP
CH
CH
CH
CH
CH
CH
32C230(10-11) 14/3/03, 11:00 AM10
11
Dimension: 140 X 215 mm
Description of Adjustment Items
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the “[ mark to “VIDEO ADJUST”.
3 Press VOL
+
/
to access the PICTURE adjust screen.
4 Press CH 8/9
to select the desired adjustment item. (Refer to
the diagram below.)
5 Press VOL
+
/
to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
Note:
VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3
modes.
VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.
(PICTURE adjust screen)
VOL
+
increases contrast
VOL
decreases contrast
(MAIN MENU screen)
Video Adjust
PICTURE 50
PICTURE 50
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
CH
CH
Selected item VOL
+
button VOL
button
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone.
RESET To return all adjustments to factory preset levels.
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH
: CH
BRIGHT
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(10-11) 14/3/03, 11:00 AM11
12
Dimension: 140 X 215 mm
L MTS (Multichannel TV Sound)
This function allows reception of stereo or bilingual TV sound.
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
Stereo broadcasts
Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.
SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
If stereo sound is difficult to hear;
You can obtain clearer sound by manually switching to fixed monaural mode.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the [” mark to “AUDIO SELECT”.
3 Press VOL
+
/
to access the AUDIO SELECT screen.
4 Press CH 8/9
to move the [ mark to “MTS” or
“AUDIO ADJUST”.
5 Press VOL
+
/
to select “STEREO”, “SAP” or “MONO” when the
[ mark is at “MTS” position.
Audio Select
(MAIN MENU screen)
MTS
STEREO
SAP
MONO
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
AUD I D J USTOA
AU I ODSEECTL
MTS
:STEREO
CH
CH
(AUDIO SELECT screen)
AUD I D J USTOA
AU I ODSEECTL
MTS
:STEREO
(AUDIO SELECT
screen
)
32C230(12-13) 14/3/03, 11:01 AM12
13
Dimension: 140 X 215 mm
L AUDIO ADJUST
When the [ mark is at AUDIO ADJUST, press VOL
+
/
to
access the AUDIO ADJUST screen. To access the desired item,
press CH 8/9. To adjust the audio setting, press VOL
+
/
.
6 Press MENU to exit.
An example screen displaying ON AIR when receiving stereo broadcasts
Current channel number
ON AIR will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
Note:
Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
Selecting MTS while receiving video signals from INPUT terminals does not change the type of
sound; in this case, sound is determined by the video source.
Audio Select (Continued)
21
STEREO
SAP
ON
ON
AIR
AIR
MONO
(CHANNEL call on screen)
TREBLE
RESET
BASS
BALANCE
Selected item VOL
+
button VOL
button
TREBLE To increase treble response. To decrease treble response.
BASS To increase bass response. To decrease bass response.
BALANCE To emphasize the right To emphasize the left
speakers volume. speakers volume.
RESET To return all adjustments to factory preset levels.
TREBL E 0
32C230(12-13) 13/3/03, 12:32 PM13
14
Dimension: 140 X 215 mm
How to set CLOSED CAPTION
Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows conversations, narration, and sound
effects in TV programs and home videos to appear as captions on the
TV screen (see the illustration).
Not all the programs and videos will offer closed captioning. Please
look for the “
symbol to ensure that captions will be shown.
Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The CAPTION mode shows subscripts of dialogs and commentaries
of TV dramas and news programs while allowing clear view of the
picture.
The TEXT mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the [” mark to “CLOSED CAPTION”.
3 Press VOL
+
/
to access the CLOSED CAPTION setting screen.
4 Press CH 8/9
to move the “[ mark to either “MODE” or “DATA”.
5 Press VOL
+
/
to change the CLOSED CAPTION setting.
6 Press MENU to exit.
Note:
If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION
mode automatically. Pressing MUTE again will return the set to its previous condition.
Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your TV.
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become
dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.
CLOSED
MODE
CAPT I ON
: CAPT I ON
DA T A
: CH 1
CC
DATA : CH 1
: CAPT I ONMOD E
CLOSED CAPT I ON
CC
CLOSED
MODE
CAPT I ON
: CAPT I ON
DA T A
: CH 1
CC
CAPTION
TEXT
OFF
CH 1
CH 2
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
CH
CH
Closed Caption
(MAIN MENU screen)
(CLOSED CAPTION setting screen)
MODE :
DATA :
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(14-16) 14/3/03, 11:05 AM14
15
Dimension: 140 X 215 mm
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
based
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
Parent Control (V-CHIP Operation)
L V-CHIP
This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
Restriction of TV programs includes two characters that contain information about the programs MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13 PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movies data.Note:
MPAA RATING
Example 1:
PG-13 in the age-based rating is blocked, this
will automatically block the higher ratings R,
NC-17, X also.
Note:
MPAA RATING is only age-based.
[2] TV PARENTAL GUIDELINES
content based
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children)
V
––
TV-Y7 (Direct to Older Children)
V
––
V
TV-G (General Audience)
V
––
TV-PG (Parental Guidance
V V V V V
Suggested)
TV-14 (Parents Strongly
V V V V V
Cautioned)
TV-MA (Mature Audience Only)
V
V V V
V
: Content Rating can be set.
l : Content Rating cannot be set (not normally broadcast by TV station).
Example 2:
R in the age-based rating is blocked, this will
automatically block the higher rating NC-17, X
also.
age
based
RATING
age
based
32C230(14-16) 13/3/03, 12:32 PM15
16
Dimension: 140 X 215 mm
Parent Control (V-CHIP Operation) (Continued)
TV PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Clear
V
s (block) from each "AGE" box for all ratings.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For TV-G put a
V
in the "AGE" box. This will automatically block the
higher age ratings TV-PG, TV-14 and TV-MA as well as TV-G.
Please note the content ratings D, L, S, V are automatically blocked
as well.
Example 2.1 : Content Based setting
If you choose to unblock every content-based items (D, L, S, V),
clear the
V
(block) from each AGE box of TV-PG, TV-14 and TV-
MA.
Example 2.2 : Content Based setting
Put a
V
in the box corresponding to TV-PG (row) and V (Violence)
(column). This will automatically block the V boxes for TV-14 and
TV-MA. Setting only TV-PG-V, TV-14-V or TV-MA-V will not block
all programs rated TV-PG, TV-14 or TV-MA.
Example 3 : Resetting an Age Based setting
For TV-14, put a
V
(block) in the AGE box.
This will again automatically block the content ratings D, L, S, V
for TV-MA as well as TV-14 (D is not available for TV-MA).
Please note that the lower age rating TV-PG does not change from its
previous settings after this.
Note:
Content ratings can be modified but only in the combinations indicated by
V
in the table on page 15.
Changing a lower age ratings content setting to BLOCK automatically changes the same higher age
ratings content setting to BLOCK regardless of their previous settings.
Changing a lower ratings AGE setting to BLOCK automatically changes all higher ratings to BLOCK
regardless of their previous settings.
For TV-Y7, TV-PG, TV-14 and TV-MA, if you clear the
V
in the AGE box (unblock) you can still
change settings based on content.
Clearing a higher ratings age or content setting will not clear lower settings. Make sure that all undesired
boxes are blocked.
[3] ADDITIONAL MODE
Besides MPAA RATINGS and TV PARENTAL GUIDELINES, new ratings systems data can be
downloaded when they become available. (See page 19.)
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
VVVV
VVVV
VVV
V
V
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
:
:
BLOCK
VIEW
FV
V
V
V
V
V
V
V
V
V
32C230(14-16) 13/3/03, 12:32 PM16
17
Dimension: 140 X 215 mm
How to set V-CHIP
[1] MPAA RATING
1 Press MENU to access the MAIN MENU screen.
2 Press CH
8/9 to move the “[ mark to “PARENT CONTROL”.
3 Press VOL
+/ to access the PARENT CONTROL screen.
4 Press VOL
+/ to access the V-CHIP select screen.
Note:
If SECRET No. is already set, enter the SECRET No.
(See
To change the V-CHIP BLOCK after
registering a secret No. on page 22.).
5 Press VOL
+
/
to select “MPAA”. Press CH
8/9 to move the “[
mark to “PG”, then press VOL
+
/
to select BLOCK. If you set
“PG” to BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically
blocked.
6 Press MENU to return to the V-CHIP select screen.
(PARENT CONTROL screen)
(V-CHIP select screen)
(MAIN MENU screen)
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
V I EW T I MER
V CH I P BLOCK
PARENT CONTROL
MP AA
TV GUI DEL I NES
AD : OFFDOWNLO
STATUS : OFF
G
PG
PG 13
R
NC 17
X
B: LOCK
B: LOCK
B: LOCK
B: LOCK
B: LOCK
: ––––
MENU : RE TURN
Parent Control (V-CHIP Operation) (Continued)
CH
CH
CH
CH
VOLUME
(
k
)/(
l
)
CHANNEL
UP (a)/
DOWN (b)
MENU
32C230(17-18) 14/3/03, 11:06 AM17
18
Dimension: 140 X 215 mm
7 Press MENU, then INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 9.
8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
9
When done, press MENU
to exit.
Note:
If you set G to BLOCK , all ratings are automatically blocked.
If you set X to BLOCK, G, PG, PG-13, R and NC-17 are not blocked.
[2] TV GUIDELINES
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH
8/9 to move the [ mark to TV GUIDELINES.
3 Press VOL
+
/
to access the TV GUIDELINES screen.
4 To change AGE and CONTENT SETTING, press CH
8/9 to move
the [ mark to the desired rating and then press VOL
+
/
to select.
5 Press CH
8/9 to move the [ mark to the desired content item
and then press VOL
+
/
to select either BLOCK or “– –”
(unblock).
6 Press MENU
to return to the TV GUIDELINES screen.
7 Repeat steps 4 to 6 until all ratings and their contents are set.
8
When done, press MENU
to return to V-CHIP selct screen.
9 Press MENU to exit.
Note:
If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.
Parent Control (V-CHIP Operation) (Continued)
(TV GUIDELINES screen)
(CONTENT RATING screen)
(V-CHIP select screen)
321
654
987
100
0
ENTER
I NPU T
––––
SECRET No .
I NPU T
1234
SECRET No .
MP AA
TV GUI DEL I NES
AD : OFFDOWNLO
STATUS : OFF
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
:
:
BLOCK
VIEW
FV
V
A
TVY7
D
GE
L
S
V
V
F
:
:
:
:
:
B LOCK
B LOCK
:
–––––
–––––
–––––
–––––
MENU : RE TURN
TV Y
TV Y7
TVG
TV PG
TV 14
TVMA
MENU : RE TURN
GAE
D
L
S
V
V
VVVV
V
VVV
VVV
V
V
V
V
VV
:
:
BLOCK
VIEW
FV
CH
CH
CH
CH
CH
CH
32C230(17-18) 14/3/03, 11:06 AM18
19
Dimension: 140 X 215 mm
Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation) (Continued)
[3] Downloading additional rating mode
There will be an additional new rating system. In that case,
please set up as follows. Subsequently the new rating
system will set up automatically.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH 8/9 to move the “[ mark to “DOWNLOAD”.
3 Press VOL
+
/
to select “DOWNLOAD : ON”.
4 Press MENU, then “INPUT SECRET No.” will be displayed.
Note:
If SECRET No. is already set, skip to step 6.
5 Enter a 4-digit secret No. using the REMOTE KEYPAD.
6 Press MENU to exit.
Downloading V-CHIP data
1 If you watch a program containing “new rating system data”, the
DOWNLOAD screen will be displayed.
2 The DOWNLOAD screen will disappear, once downloading is finished.
Note:
DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.
MP AA
TV GUI DEL I NES
AD : OFFDOWNLO
STATUS : OFF
MP AA
TV GUI DEL I NES
AD : ONDOWNLO
STATUS : OFF
PL AESE AWTI
NOW DOWNLOADI
V CH I P DATA
NG
CH
CH
I NPU T
––––
SECRET No .
I NPU T
1234
SECRET No .
321
654
987
100
0
ENTER
(DOWNLOAD screen)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
REMOTE
KEYPAD
MENU
32C230(19-22) 14/3/03, 11:07 AM19
20
Dimension: 140 X 215 mm
How to set additional rating mode (Example)
Once downloading is complete, you can set the blocking pattern as follows.
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH 8/9 to move the [ mark to Cdn. English Ratings,
then press VOL k/l.
3 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH 8/9 and VOL
+
/
.
4 You can select BLOCK or “– –” (unblock) for each rating
item by pressing CH 8/9 and VOL
+
/
if you select Cdn. French
Ratings in step 2.
Note:
You are able to download up to 4 different rating systems.
MPAA
TV GU I
Cdn .
DOWNL
nEglis Rhatinsg
Cdn .
rFenchRatinsg
EDLINES
OAD : ON
STATU
S:ON
(After downloading the
rating data)
C
C8+
G
PG
14+
18+
INDIV
B: LOCK
: ––––
B: LOCK
: ––––
B: LOCK
: ––––
IDUAL BL
MENU : RE TURN
OCK
(ENGLISH INDIVIDUAL
BLOCK screen)
G
8+
13+
16+
18+
INDIV
: ––––
B: LOCK
: ––––
B: LOCK
: ––––
IDUAL BL
MENU : RE TURN
OCK
(FRENCH INDIVIDUAL
BLOCK screen)
CH
CH
CH
CH
CH
CH
Parent Control (V-CHIP Operation) (Continued)
32C230(19-22) 14/3/03, 11:07 AM20
21
Dimension: 140 X 215 mm
Activating the V-CHIP BLOCK
1 Repeat steps 1 to 4 of [1] MPAA RATING.
2 Press CH 8/9 to move the [ mark to STATUS. Press VOL
+
/
to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP
BLOCK will not operate.)
3 Press MENU, then INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 5.
4 Enter a 4-digit secret No. using the REMOTE KEYPAD.
5 Press MENU and the secret No. will be registered.
To temporarily cancel the V-CHIP BLOCK
1 V-CHIP HAS BEEN ACTIVATED appears if you view a program
with the same program rating data you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED will not be displayed if STATUS is not configured to ON.
2 Press MENU, then INPUT SECRET No. will be displayed.
3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-
CHIP BLOCK will be canceled temporarily. If the wrong secret No.
is chosen, SECRET No. IS INCORRECT will be displayed. Input
the secret No. again in this case.
Note:
If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.
CH
CH
321
654
987
100
0
ENTER
MPAA
TV GU I
DOWNL
EDLINES
OAD : OF F
STATU
S:ON
I NPU T
––––
SECRET No .
I NPU T
1234
SECRET No .
Parent Control (V-CHIP Operation) (Continued)
321
654
987
100
0
ENTER
22
VCH I P
TVY7
FV
HAS BEEN ACT I VATED
I NPU T
––––
SECRET No .
I NPUT SECRET No .
(V-CHIP select screen)
32C230(19-22) 14/3/03, 11:07 AM21
22
Dimension: 140 X 215 mm
To change the V-CHIP BLOCK setting after registering a secret No.
1 Repeat steps 1 to 4 of [1] MPAA RATING, then INPUT SECRET
No. will be displayed.
2 Enter the 4-digit secret No. using the REMOTE KEYPAD and
the V-CHIP select screen will be displayed. Set V-CHIP BLOCK
again.
If you forget or need to change your secret No., clear the original secret No. and set
up a new one.
1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To
temporarily cancel the V-CHIP BLOCK, then INPUT SECRET
No. will be displayed.
2 Press and hold both VOL
+
and CH 8 on the TV set
simultaneously until the message INPUT SECRET No.
disappears.
3 Press the MENU button twice to exit.
I NPUT
––––
SECRET No .
I NPUT SECRET No .
321
654
987
100
0
ENTER
Parent Control (V-CHIP Operation) (Continued)
(On the Set)
VOL
(+)
/
CH UP (8)
buttons
32C230(19-22) 13/3/03, 12:32 PM22
23
Dimension: 140 X 215 mm
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration while the TV power is on.)
VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV viewing after the VIEWING TIME reaches
zero.)
OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (Select ON to activate VIEW TIMER)
How to set VIEW TIMER
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the “[ mark to “PARENT CONTROL”.
3 Press VOL
+
/to access the PARENT CONTROL screen.
4 Press CH 8/9
to move the “[ mark to “VIEW TIMER”.
5 Press VOL
+
/to access “VIEW TIMER”.
6 Press CH 8/9
to select “VIEWING TIME” and “OFF TIME”. For
each selection, press the VOL
+
/ to set the time duration.
7 Press CH 8/9
to select “STATUS”. Press the VOL
+
/to turn ON
the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not
operate.)
8 Press MENU. “INPUT SECRET No. will be displayed.
Note:
If SECRET No. is already set, skip to step 10.
Parent Control (VIEW TIMER)
(MAIN MENU screen)
(PARENT CONTROL screen)
VIEWING
––H
TIME
OFF
––H
––M
––M
TIME
STATUS : OFF
V I EW T I MER
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
V CH I P BLOCK
PARENT CONTROL
VIEW TIMER
VIEWING
––H
TIME
OFF
––H
––M
––M
TIME
STATUS : OFF
V I EW T I MER
CH
CH
CH
CH
CH
CH
VIEWING
2H
TIME
OFF
––H
00M
––M
TIME
STATUS : OFF
V I EW T I MER
VIEWING
2H
TIME
OFF
00M
5H 00M
TIME
STATUS : ON
V I EW T I MER
I NPU T
––––
SECRET No .
CH
CH
32C230(23-26) 14/3/03, 11:08 AM23
24
Dimension: 140 X 215 mm
Parent Control (VIEW TIMER) (Continued)
9 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
10
Press MENU to exit.
Example:
To restrict anybody from watching TV for more than 5 hours, after watching
the TV for 2 hours, your settings would look like the one on the right.
You can choose to watch the 2 hours of TV as you wish. For example, you
could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV
on and watch the remaining 1 hour of the VIEWING TIME.
To change the VIEW TIMER setting after registering a secret No.
1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press
VOL
+
/, and “INPUT SECRET No. will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen will
be displayed. Repeat steps 5, 6.
Note:
When you choose the correct secret No., the VIEW TIMER access screen
is displayed. If the wrong secret No. is chosen, “SECRET No. IS
INCORRECT” is displayed. Input the secret No. again in this case.
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set.)
1 Turn on the TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit secret No. using the REMOTE
KEYPAD. When you choose the correct secret No.,
the VIEW TIMER is canceled. If the wrong secret No.
is chosen, “SECRET No. IS INCORRECT” is
displayed. Input the secret No. again in this case.
VIEWING
2H
TIME
OFF
00M
5H 00M
TIME
STATUS : ON
V I EW T I MER
321
654
987
100
0
ENTER
321
654
987
100
0
ENTER
321
654
987
100
0
ENTER
I NPU T
1234
SECRET No .
I NPU T
––––
SECRET No .
SECRE T I S I NCORRECTNo .
T I ME OV ER
I NPU T
––––
SECRET No .
T I ME OV ER
I NPUT SECRET No .
I NPUT SECRET No .
32C230(23-26) 14/3/03, 11:08 AM24
25
Dimension: 140 X 215 mm
Parent Control (VIEW TIMER) (Continued)
To cancel the VIEW TIMER setting or change the secret No. (If
you forget the SECRET No.)
1 Repeat steps 1 to 4 of How to set VIEW TIMER. Press VOL
+
/,
and “INPUT SECRET No.” will be displayed.
2 Press and hold both VOL
+
and CH 8 on the TV set simultaneously
until the VIEW TIMER access screen is displayed. Now you can
cancel the VIEW TIMER settings or change the SECRET No. while
“INPUT SECRET No. is displayed.
Notice of Remaining VIEWING TIME
For every 30 minute interval, the remaining time will be displayed for
4 seconds. For the last 5 minutes, the remaining time will be displayed
every minute.
“0 REMAIN” will be displayed for 10 seconds just before the VIEWING
TIME expires.
REMAIN
30M
VIEWING TIME
0H
REMAIN
05M
VIEWING TIME
0H
REMAIN
0
VIEWING TIME
(On the Set)
VOL
(+)
/
CH UP (8)
buttons
I NPU T
––––
SECRET No .
32C230(23-26) 14/3/03, 11:08 AM25
26
Dimension: 140 X 215 mm
Energy Save
This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9
to move the “[ mark to “ENERGY SAVE”.
3 Press VOL
+
/ to access the ENERGY SAVE select screen.
4 Press VOL
+
/ to select “ON”.
5 Press MENU to exit.
(MAIN MENU screen)
(ENERGY SAVE select screen)
CH
CH
ENERGY SAVE : ON
ENERGY SAVE : OFF
SLEEP T I MER
AUD I O SEL ECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(23-26) 14/3/03, 11:08 AM26
27
Dimension: 140 X 215 mm
L EZ Setup
By operating the channel preset functions, you can preset your
TV to the desired channels for viewing.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9 to move the “[ mark to “SET UP”.
3 Press VOL +/to access the SET UP screen, then press
CH 8/9 to move the “[ mark to “CH SETTING”.
4 Press VOL +/ to access the CH SETTING screen.
5 Press VOL +/ to access the EZ SETUP screen.
6 Press VOL +.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL –. Search will be canceled.
To cancel EZ SETUP
Press VOL –.
7 Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
Set Up
(MAIN MENU screen)
(EZ SETUP screen)
(CH SETTING screen)
(SET UP screen)
2
BLUE SCREEN
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
SET UP
A I R/ CABL E
CH SEARCH
CH MEMORY
EZ SETUP
CH SET T I NG
STOP START
PLEASE WAI T
125
AUTO PROGRAMM I NG
START
STOP START
SETUP?EZ
OR CAB L E.CONNECT ANT ENNA
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
CH
CH
(START)
(STOP)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(27-28) 14/3/03, 11:09 AM27
28
Dimension: 140 X 215 mm
Set Up (Continued)
L Channel Setting
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9 to move the [ mark to SET UP.
3 Press VOL +/ to access the SET UP screen.
4 Press CH 8/9 to move the [ mark to CH SETTING.
5 Press VOL +/ to access the CH SETTING screen.
6 Press CH 8/9 to move the [ mark to AIR/CABLE, then press
VOL +/ to access the AIR/CABLE screen.
7 Press CH 8/9 to move the [ mark to the desired mode.
8 Press MENU to exit.
Note:
Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
(MAIN MENU screen)
(CH SETTING screen)
(SET UP screen)
(AIR/CABLE screen)
BLUE SCREEN
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
SET UP
A I R/ CABL E
CH SEARCH
CH MEMORY
EZ SETUP
CH SET T I NG
CABLE
A I R/ CABL E
CABLE HRC
CABLE I RC
AIR
STD
AIR
CABLE STD
CABLE HRC CABLE IRC
A I R/ CABL E
CH SEARCH
CH MEMORY
EZ SETUP
CH SET T I NG
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
CH
CH
CH
CH
CH
CH
32C230(27-28) 14/3/03, 11:09 AM28
29
Dimension: 140 X 215 mm
Saving broadcast TV channels into memory
1 Press MENU to access the MAIN MENU
screen, then press CH 8/9 to move the [
mark to “SET UP”.
2 Press VOL +/ to access the SET UP screen,
then press CH 8/9 to move the [ mark to
“CH SETTING”.
3 Press VOL +/ to access the CH SETTING
screen.
4 Press CH 8/9 to move the [ mark to “CH
SEARCH”, then press VOL +/ to access the
CH SEARCH screen.
To start:
Press VOL +. The tuner will search through
all available channels in your area and add
them into the TV memory.
To stop:
Press VOL –. CH SEARCH will stop at the
current channel and will not add any higher
channels.
5 Press MENU to exit.
Note:
If you press VOL + again while in the CH SEARCH mode, auto-program
will start again, and the previously memorized channels will be lost.
Adding weak or additional channels or erasing unwanted channels from TV memory
1 Press MENU to access the MAIN MENU
screen, then press CH 8/9 to move the [
mark to “SET UP”.
2 Press VOL +/ to access the SET UP screen,
then press CH 8/9 to move the [ mark to
“CH SETTING”.
3 Press VOL +/ to access the CH SETTING
screen, then press CH 8/9 to move the [
mark to “CH MEMORY”.
4 Press VOL +/ to access CH MEMORY.
5 Use CH 8/9 or REMOTE KEYPAD to select
each desired channel to add or erase.
(CH SETTING screen)
(CH SETTING screen)
(CH SEARCH screen)
A I R/ CABL E
CH SEARCH
CH MEMORY
EZ SETUP
CH SET T I NG
STOP START
CH SEARCH
AIR 10
A I R/ CABL E
CH SEARCH
CH MEMORY
EZ SETUP
CH SET T I NG
(START)
(STOP)
or
321
654
987
100
0
ENTER
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
Set Up (Continued)
32C230(29-30) 14/3/03, 11:11 AM29
30
Dimension: 140 X 215 mm
6 Press VOL + to add a channel to the TV
memory or press VOL – to erase a channel
from the TV memory.
7 Press MENU to exit.
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received. After 15 minutes of non-reception, the TV will turn off
automatically.
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9 to move the “[” mark to “SET UP”.
3 Press VOL +/ to access the SET UP screen.
4 Press VOL +/ to access the BLUE SCREEN select screen.
5 Press VOL +/ to select “ON”.
VOL +
To add channel 10 to
the TV memory
VOL
To erase channel 10 from
the TV memory
(CH MEMORY
memorized channel)
(CH MEMORY
unmemorized channel)
CH
AIR
ERASE ADD
10
MEMORYCH
AIR
ERASE ADD
10
MEMORY
(MAIN MENU screen)
(SET UP screen)
(BLUE SCREEN select screen)
BLUE SCREEN
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
SET UP
BLUE SCREEN : OFF
BLUE SCREEN : ON
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
Set Up (Continued)
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(29-30) 14/3/03, 11:43 AM30
31
Dimension: 140 X 215 mm
6 Press MENU to exit.
When the BLUE SCREEN is set to ON
Note:
Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN OFF.
While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
Set Up (Continued)
No signal
after 15
minutes
Power turns off
automatically
Blue screen
Standby mode
32C230(31-34) 13/3/03, 12:32 PM31
32
Dimension: 140 X 215 mm
Auto Input
The unit is preset to switch to the INPUT 2 screen automatically
when VIDEO equipment is connected to the INPUT 2 terminal. Do
the following to switch this feature off:
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9 to move the “[” mark to “SET UP”.
3 Press VOL +/ to access the SET UP screen, then press CH
8/9 to move the “[” mark to “AUTO INPUT”.
4 Press VOL +/ to access the AUTO INPUT select screen.
Press VOL +/ to select “AUTO”.
5 You may turn off “AUTO INPUT” when it is not in use.
Press VOL +/ to select “OFF”.
6 Press MENU to exit.
CH
CH
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
BLUE SCREEN
SET UP
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
(MAIN MENU screen)
(SET UP screen)
AUTO I NPUT
(INPUT2)
: AUTO
(AUTO INPUT select screen)
AUTO I NPUT
(INPUT2)
: OFF
CH
CH
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
32C230(31-34) 14/3/03, 11:11 AM32
33
Dimension: 140 X 215 mm
CH/Input ID
You can assign an ID label to each channel or input mode. These
ID labels can be 4 characters long maximum and will be displayed
along with the channel number/input mode when the labeled
channel is selected.
(Example: labeling air channel 10 TV12.)
1 Press MENU to access the MAIN MENU screen.
2 Press CH 8/9 to move the [ mark to SET UP.
3 Press VOL +/ to access the SET UP screen then press CH
8/9 to move the [ mark to CH/INPUT ID .
4 Press VOL +/ to access the CH/INPUT ID screen.
(MAIN MENU screen)
(SET UP screen)
(CH/INPUT ID screen)
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
ID
CH I NPUT I D/
AIR 10
:____
CH
CH
BLUE SCREEN
LANGUAGE
CH SETT I NG
CH
SCREEN FORMAT
/ INPUT I D
AUTO I NPUT
SET UP
VOLUME
(+)/()
CHANNEL
UP (8)/
DOWN (9)
MENU
REMOTE
KEYPAD
32C230(31-34) 14/3/03, 11:11 AM33
34
Dimension: 140 X 215 mm
CH/Input ID (Continued)
5 Use CH 8/9 or REMOTE KEYPAD to select each desired channel
to label.
Press INPUT on the Remote to label the INPUT mode.
ID: Labeling the channel name
Press VOL +/ to select ID then press VOL + to select the first
character. Press CH 8/9 to enter a desired letter. Press VOL +/
to enter the next desired letter. Press MENU to return to the
CH/INPUT ID screen.
Selectable characters:
Space: _
Alphabets: A-Z
Numbers: 0-9
Symbols: . & ( ) / +
RESET: Resetting the ID to _ _ _ _
Press CH 8/9 to move the [ mark to RESET, then press VOL
+/. The previously set ID will return to _ _ _ _.
6 Press MENU to exit.
Note:
The maximum number of ID labels available to register channel names is 20 for AIR channels and 40
for CABLE channels.
If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID
to make room.
CH
CH
ID
RESET
: T V 1 2
MENU : RETURN
ID
RESET
: _ __ _
MENU : RETURN
CH
CH
321
654
987
100
0
ENTER
ID
RESET
: _ __ _
MENU : RETURN
ID
RESET
: T V 1 2
MENU : RETURN
or
CH
CH
(ID Input screen)
Example TV 12
32C230(31-34) 14/3/03, 11:11 AM34
35
Dimension: 140 X 215 mm
Screen Format
The format of the picture can be adjusted to either of the two
screen formats.
(This function allows you to view 16:9 pictures recorded on DVD
or by camcorders that are once saved using the 4:3 aspect ratio
to be played back in the original high-density 16:9 format.)
1 Press MENU to access the MAIN MENU screen.
2 Press CH a/s to move the “E” mark to “SET UP”.
3 Press VOL k/l to access the SET UP screen, then press
CH a/s to move the “E” mark to “SCREEN FORMAT”.
4 Press VOL k/l to access the SCREEN FORMAT select screen.
5 Press CH a/s to select “4:3” or “16:9”.
6 Press MENU to exit.
Note:
The 16:9 screen format will be cancelled when the power is turned off.
Example:
While in 4:3 mode, if the picture appears stretched vertically as in screen A below, switch to 16:9 mode.
The picture will return to normal as shown in screen B.
VOLUME
(
k
)/(
l
)
CHANNEL
UP (
a
)/
DOWN (
s
)
MENU
(MAIN MENU screen)
(SET UP screen)
(SCREEN FORMAT select screen)
Sreen A (4:3) Sreen B (16:9)
CH
CH
4:3
16:9
SCREEN FORMAT
4:3
16:9
SCREEN FORMAT
BLUE SCREEN
PERSONAL PREF.
UNIVERSAL PLUS
CH SETTING
AUTO INPUT
CH/INPUT ID
LANGUAGE
SCREEN FORMAT
SET UP
SLEEP T I MER
AUD I O SELECT
CLOSED CAPT I ON
PARENT CONTROL
ENERGY
SET UP
SAVE
V I DEO ADJ UST
MENU
CC
ES
CH
CH
CH
CH
32C230(35-37) 14/3/03, 12:00 PM35
36
Dimension: 140 X 215 mm
(Front connection
terminals of TV)
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
To VIDEO
OUTPUT
(Rear connection
terminals of TV)
To VIDEO OUTPUT
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
DVD
CAMCORDER
TV GAME
VCR
Yellow : To video input terminal
White : To audio input (L) terminal
Red : To audio input (R) terminal
Using the Video and Audio Input Terminals
VIDEO EQUIPMENT
Connecting video equipment for playback of video material.
To view video material from external video equipment, make sure to connect the equipment properly
to the input terminals on the TV set.
Connecting video device equipped with video output terminals
CONNECTIONS
32C230(35-37) 13/3/03, 12:33 PM36
37
Dimension: 140 X 215 mm
Using the Video and Audio Input Terminals (Continued)
To watch video material playback
Press the Remotes INPUT button to select the VIDEO INPUT mode for the video equipment you
wish to play.
The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.
When the AV cables are connected to the VIDEO INPUT 3 and COMPONENT Y, PB and PR terminals
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.
INPUT mode can be selected by pressing either the CH 8 on the TV remote control when the TV is
set to the highest channel stored in memory, or by pressing the CH 9 when it is set to the lowest
channel.
When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video equipment
connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.
It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
The connection cables/cords can be obtained from your local video store.
AIR
or
CABLE
INPUT 1
(IN 1)
Rear
INPUT 2
(IN 2)
Front
INPUT 3 (COMPONENT)
(IN 3)
Rear
Note:
VCR
(Rear connection terminals of TV)
TO S-VIDEO OUTPUT
(When your video equipment
has an S-VIDEO output terminal).
To AUDIO
OUTPUT (L/R)
To COMPONENT
VIDEO OUTPUT
Terminals
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
To VIDEO OUTPUT
Video Equipment with Component
video (Component Color)
Output Terminals (Y, PB and PR)
Notes:
COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback
image than the image from IN 1 S-VIDEO terminal.
The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.
The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio
cable to the IN 1 AUDIO terminals (left and right).
32C230(35-37) 13/3/03, 12:33 PM37
38
Dimension: 140mm x 215mm
Before Calling for Service
Check these items and see if you can correct the trouble with a slight adjustment of the controls.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then there
is a possible station trouble.
Is TV plugged in? Power at outlet?
Is TVs POWER button on?
Is antenna connected to terminal on
the back of the set?
If outside antenna is being used,
check for broken wire.
Check for local interference or
external electrical noise.
Turn off the POWER and then turn it
on after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
Check external Video/Audio products:
look for loose/broken connection
leads. (Refer to pages 3537)
Check batteries of Remote Control.
Are audio cables connected firmly?
Check the volume level.
Change Closed Caption mode to
OFF/Energy Save mode to OFF.
Unplug the TV and plug it in again
after 2 minutes or longer.
XXXXXXX X XXXXXXXXX X
X XXXXXX X XXXXXXX XX X
X X XXXXX X XXXXXXX XX X
XXXXXXXX XX X X X X X XX X
XXXXXXX X XXXXXX X XX X
XXXX X X X X X XXX XXXX X X
X X XXXXX X XXXXXXX XX X
XXXXXXX X XXXXXXXX X X
XXXXXXXXX XXXX XXX X X
XXXXXXX X XXXXXXXXX X
XXX XXXX X XXXXXXXX X X
X X XXXXX X XXXXXXX XX
X X XXXXX X XXXXXXXX XX
XXX XXXX X X XXXXXXX X X
PROBLEM
No Playback of VCR and Disc
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn
t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV
s Operation
Color on Part of the Screen
Appears Distored
(Dark and Blank Picture)
Note:
If no TEXT broadcast is being received while viewing in the TEXT
mode, the screen may become dark and blank for some programs.
Should this occur, switch the Closed Caption mode to OFF.
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
Calling for Service
32C230(38-39) 13/3/03, 12:33 PM38
39
Dimension: 140mm x 215mm
MODEL 32C230
Receiving System NTSC
Stereo Broadcast MTS/SAP
Reception Channels
AIR VHF 2-13 ch
UHF 14-69 ch
CATV 1-125 ch
Channel Tuning 181-channel Reception PLL tuning system
Antenna Input Impedance VHF/UHF 75 ohm Unbalanced
Screen Size 32˝ Diagonally Measured
Terminals Audio/Video input x 3 (Front x 1, Rear x 2)
S-Video input x 1 (Rear)
COMPONENT x 1 (Rear)
Antenna x 1 (Rear)
Sound Output 3 W (RMS) x 2
Power Source AC 120 V, 60 Hz
Power Consumption 135 W
Dimensions 33
55
/64˝ (W) x 26
37
/64˝ (H) x 21
3
/8˝ (D)
[860 mm (W) x 675 mm (H) x 543 mm (D)]
Weight (approx.) 110.7 Ibs. (50.2 kg)
Specifications
Design and specifications are subject to change without notice.
32C230(38-39) 17/03/03, 9:28 AM39
40
Dimension: 140mm x 215mm
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.
IMPORTANTE
Sírvase anotar el modelo del televisor y los números de serie
en el espacio provisto, para ayudar a reportar en caso de
pérdida o robo. Los números están ubicados en la parte
posterior del televisor.
N° de modelo :
N° de serie :
(ESPAÑOL)
INFORMACIÓN IMPORTANTE
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.
PRIMERA GARANTÍA
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio
técnico y mano de obra aplicable a su adquisición.
SEGUNDA ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,
modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de
consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA GARANTÍA LIMITADA DE LA ÚLTIMA PÁGINA.
¿QUÉ ES ENERGY STAR
®
?
Los televisores y las videograbadoras utilizan energía cuando están encendidos ó apagados. Los norteamericanos
gastan más de 1 billón de dólares al año en la energía que consumen televisores y videograbadoras cuando no
se encuentran en uso. Los nuevos modelos ENERGY STAR
®
reducen esa fuga de energía hasta en un 75
por ciento. Esto implica más de 500 millones de dólares al año en ahorro de energía para los consumidores.
El ahorro de energía ayuda a reducir el consumo de combustibles fósiles y por tanto la contaminación por
dióxido de carbono que contribuye al calentamiento global. Si cada familia norteamericana sustituyera sus
televisores y videograbadoras por modelos ENERGY STAR
®
, se reducirían las emisiones de dióxido de carbono
en cinco millones de toneladas cada año (equivalente a eliminar la contaminación procedente de más de un
millón de automóviles).
El uso de productos ENERGY STAR
®
permite reducir el monto de las facturas de energía eléctrica y consumir
menos energía. De este modo ahorrará dinero y ayudará a proteger el medio ambiente.
ADVERTENCIA :
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN: PARA REDUCIR EL RIESGO DE
DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA
(NI EL PANEL POSTERIOR).
NO CONTIENE PIEZAS REPARABLES POR EL USUARIO.
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE
SERVICIO TÉCNICO ESPECIALIZADO.
El relámpago con cabeza de
flecha dentro de un triángulo trata
de indicar al usuario que las partes
dentro del producto representan
riesgo de electrochoque para las
personas.
El signo de exclamación dentro de
un triángulo trata de indicar al
usuario que las instrucciones
importantes de operación y
servicio se encuentran en los
documentos con el aparato.
Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del
instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las
directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar
conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.
32C230(40-42) 13/3/03, 12:33 PM40
41
Dimension: 140mm x 215mm
ADVERTENCIA - Las Normas de la FCC establecen que cualquier cambio o modificación no autorizada que
se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad
del usuario para utilizar este equipo.
DESECHO DEL PRODUCTO
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con
Electronics Industries Alliance: www.eiae.org
INFORMACIÓN IMPORTANTE (Continuación)
PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.
MEDIDAS DE SEGURIDAD IMPORTANTES
PRECAUCIÓN: Lea por favor todas estas instrucciones antes de poner en funcionamiento
su televisor, y guárdelas para poder utilizarlas en el futuro.
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.
1. Desenchufe el televisor del tomacorriente antes de limpiarlo.
2. No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.
3. No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.
4. No utilice el televisor cerca del agua por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en
un sótano húmedo, cerca de una piscina, etc.
5. No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor
solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con
el televisor.
6. La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas
rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la
combinación de televisor y carrito se volteen.
7. Cuando instale el televisor en una pared o en una estantería siga las instrucciones del
fabricante, y utilice el kit de montaje aprobado por el fabricante.
8. Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para
que éste funcione bien y para evitar que se caliente. Estas aberturas no deben taparse nunca. Este televisor
no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación
apropiada.
9. Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.
10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien
adquirió el televisor o con la compañía eléctrica local.
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de
uso.
11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.
Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.
No modifique el enchufe porque anulará esta característica de seguridad.
12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable
pueda ser deformado por personas que caminen sobre él.
32C230(40-42) 13/3/03, 12:33 PM41
42
Dimension: 140mm x 215mm
MEDIDAS DE SEGURIDAD IMPORTANTES
(Continuación)
13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.
14. Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a
tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas.
La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra
correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de
descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de
antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a
tierra.
15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la
sobretensión en la línea de alimentación.
16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de
luces eléctricas o circuitos de alimentación. Tampoco debe ubicarse donde pueda caer sobre tales líneas
o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado
para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.
17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o
descarga eléctrica.
18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca
ningún tipo de líquido sobre el televisor.
19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una
descarga de tensión u otros peligros. Las reparaciones debe realizarlas el personal de servicio CALIFICADO.
20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se
produzcan las condiciones siguientes:
A. Cuando el cable de la alimentación o el enchufe estén estropeados.
B. Cuando haya derramado un líquido sobre el televisor.
C. Si el televisor ha quedado expuesto a la lluvia o al agua.
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente
los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles
podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que
éste lo repare y lo devuelva a su condición normal.
E. Si el televisor se ha caído o la caja se ha estropeado.
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio
de reparaciones.
21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún
problema.
22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de
CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas
originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u
otros peligros.
32C230(40-42) 13/3/03, 12:33 PM42
43
Dimension: 140mm x 215mm
Nombres de los componentes (ESPAÑOL)
Panel Delantero
Referencia rápida de los controles de operación
TV
Funciones Basicas Del Control Remoto
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier
canal empleando las teclas.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREPARACION (MENU)
Pulsando Accede al MENU
PRINCIPAL.
Pulsando nuevamente Sale del
MENU PRINCIPAL.
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente Elimina la
visualización.
En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
ENTRADA (INPUT)
Pulsando Cambia al modo de entrada
1 del vídeo externo.
Pulsando 2 veces Cambia al modo de
entrada 2 del vídeo externo.
Pulsando 3 veces Cambia al modo de
entrada 3 del vídeo externo.
Pulsando 4 veces Vuelve al modo TV
original. Consulte la página 37.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(a) Selecciona el siguiente canal superior.
(s) Selecciona el siguiente canal inferior.
Consulte las páginas 28–30 para obtener
información sobre el preajuste de canales.
En el modo de MENU, mueve la marca
E ”.
SILENCIAMIENTO (MUTE)
Pulsando Silencia el sonido.
Pulsando nuevamente Restaura el
sonido.
Cuando se silencia el sonido, CLOSED
CAPTION aparece si se encuentra dis-
ponible.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(k) Aumenta el sonido.
(l) Disminuye el sonido.
Cambia o selecciona los ajustes de
TV en la visualización en pantalla.
CANAL SUPERIOR/INFERIOR
(a) Selecciona el siguiente canal
superior.
(s) Selecciona el siguiente canal
inferior.
TERMINALES DE ENTRADA
VIDEO/AUDIO IN 2
SENSOR DE
CONTROL REMOTE
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
MENU (MENU)
Pulsando Accede al MENU PRINCIPAL.
Pulsando nuevamente Sale del MENU
PRINCIPAL.
POR DENTRO DE LA PUERTA
AUMENTO/DISMINUCION DEL
VOLUMEN (VOL)
(k) Aumenta el sonido.
(l) Disminuye el sonido.
32C230(43-44) 14/3/03, 11:15 AM43
44
Dimension: 140mm x 215mm
Antes de llamar al servicio de reparaciones
Verifique estos puntos para ver si usted mismo puede solucionar el problema.
(Imagen oscura y en blanco)
Nota:
Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el
modo CLOSED CAPTION en OFF.
Solicitud de servicio técnico
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.
XXXXXXXXXXXXXXXXX X
X XXXXXXXXXXXXXX XX X
X X XXXXXXXXXXXXX XX X
XXXXXXXXXX X X X X X XX X
XXXXXXXXXXXXXX X XX X
XXXX X X X X X XX X XXXX X X
X X XXXXXXXXXXXXX XX X
XXXXXXX XXXXXXXXX X X
X X XXXXXXX XX XX XXX X X
XXXXXXXXXXXXXXXXX X
XXX XXXXXXXXXXXXX X X
X X XXXXXXXXXXXXX XX
X X XXXXXXXXXXXXXX XX
XXX XXXX X X XX XXXXX X X
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
Está conectado el televisor?
Llega electricidad al tomacorrientes?
Está conectado el interruptor del
televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
Si utiliza una antena exterior, cerciórese
de que el cable no esté dañado.
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
Verifique los productos externos de
Video/Audio, revise si hay fugas de
conexiones sueltas o rotas.
Compruebe el estado de las pilas del
mando a distancia.
Están bien conectados los cables de
sonido? Compruebe el nivel del volumen.
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos o más.
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
PROBLEMA
El vídeo o el reproductor de discos de
video no reproducen im
ágenes
El equipo de video/audio externo no
produce imágenes ni sonido
El mando a distancia no funciona
Barras en la pantalla
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Imagen adecuada, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido el
éctrico externo
con el funcionamento del televisor
El color se ve distorsionado en parte de
la pantalla
32C230(43-44) 13/3/03, 12:33 PM44
45
Dimension: 140mm x 215mm
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.
IMPORTANT
Afin de vous aider en cas de perte ou de vol, inscrivez les
numéros de série et de modèle du téléviseur dans les
espaces fournis à cet effet. Ces numéros sont situés à
larrière du téléviseur.
N° du modèle :
N° de série :
(FRANÇAIS)
INFORMATIONS IMPORTANTES
Deux raisons importantes denregistrer rapidement la garantie de votre nouveau téléviseur SHARP à
laide de la carte denregistrement (REGISTRATION CARD) incluse dans le colis :
LA PREMIERE LA GARANTIE
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du
service et des travaux applicable à votre achat.
LA DEUXIEME LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER
PRODUCT SAFETY ACT)
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre
produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.
LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.
ENERGY STAR
®
: QUEST-CE QUECEST
Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsquils sont allumés et éteints. Les Américains dépensent
plus d1 milliard de dollars par an en énergie consommée par les téléviseurs et les magnétoscopes une fois éteints. Les
nouveaux modèles ENERGY STAR
®
réduisent jusqu’à 75 % ce gaspillage d’énergie. Ce qui représente finalement
plus de 500 millions de dollars par an d’économie d’énergie pour les consommateurs.
Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique associée, qui
contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient leurs téléviseurs et leurs
magnétoscopes par des modèles ENERGY STAR
®
, les émissions de gaz carbonique seraient réduites de cinq millions
de tonnes par an ce qui reviendrait à éliminer la pollution émise par plus dun million de voitures.
En utilisant les produits ENERGY STAR
®
, vous économiserez également de largent sur vos factures d’électricité et
vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre environnement !
AVERTISSEMENT:
POUR REDUIRE LE RISQUE DINCENDIE OU DELECTROCUTION,
NEXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.
ATTENTION : POUR REDUIRE LE RISQUE
DELECTROCUTION,
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).
LAPPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR
PAR LUTILISATEUR.
CONSULTEZ UN PERSONNEL QUALIFIE POUR
LA MAINTENANCE.
Le symbole de la foudre sous
forme de flèche dans un triangle
est supposé indiquer à
lutilisateur que les pièces
internes au produit constituent
un risque d’électrocution.
Le symbole du point dexclamation
dans un triangle est supposé
indiquer à lutilisateur que des
instructions de fonctionnement et
de maintenance importantes se
trouvent dans la documentation
fournie avec l’équipement.
Note à lintention de linstallateur du système CATV : Ce rappel est fourni afin dattirer lattention de linstallateur
de système CATV sur larticle 820-40 du National Electrical Code qui indique les règles de mise à la terre
appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à
la terre du bâtiment, au point le plus proche possible de la source.
32C230(45-47) 13/3/03, 12:33 PM45
46
Dimension: 140mm x 215mm
INFORMATIONS IMPORTANTES (Suite)
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir
de lutilisateur sur le fonctionnement de cet équipement.
MISE AU REBUT DU PRODUIT
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute
information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes
préconisées par la société Electronics Industries Alliance sur : www.eiae.org.
ATTENTION: Ne placez pas le cordon dalimentation sous le téléviseur ou sous tout autre objet lourd.
PRÉCAUTIONS IMPORTANTES
ATTENTION : Veuillez lire toutes ces instructions avant dutiliser votre télévision et conservez-
les pour un usage ultérieur.
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon
à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES
RISQUES DELECTROCUTION OU DINCENDIE. Afin de ne pas détruire les protections intégrées à cet appareil,
respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.
1. Débranchez la télévision avant de la nettoyer.
2. Nutilisez pas de nettoyants liquides ou daérosols et utilisez un chiffon humide.
3. Nutilisez pas daccessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.
4. Nutilisez pas cette télévision à proximité deau par exemple, près dune baignoire, dun lavabo, dun
évier ou dun bac à laver, dans une cave humide ou près dune piscine, etc.
5. Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber
et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez
uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la
télévision.
6. Lensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une
force excessive et des surfaces inégales peuvent renverser lensemble.
7. Linstallation au mur ou sur une tablette doit être réalisée conformément aux instructions
du fabricant et à laide dun kit de montage approuvé par ce dernier.
8. Les fentes et les ouvertures du châssis à larrière ou dans la partie inférieure sont prévus pour la ventilation.
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures
ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré
tel quune bibliothèque, sauf si une ventilation adéquate est prévue.
9. Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure
ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface
similaire. Cette télévision ne doit être placée ni à proximité dun radiateur ou dun registre de chaleur, ni
dessus.
10. Cette télévision doit être alimentée uniquement par le type dalimentation électrique indiqué sur l’étiquette.
Si vous n’êtes pas sûr du type dalimentation de votre domicile, consultez votre revendeur de télévision
ou la compagnie d’électricité locale (EDF en France).
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode demploi.
11. Du point de vue de la sécurité, la télévision est équipée dune fiche polarisée à 2 fils (une lame plus
importante que lautre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul
sens.
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.
12. Ne posez rien sur le cordon dalimentation. Ne placez pas la télévision dans un emplacement où le
cordon dalimentation est susceptible d’être endommagé par le passage répété de personnes.
32C230(45-47) 13/3/03, 12:33 PM46
47
Dimension: 140mm x 215mm
PRÉCAUTIONS IMPORTANTES (Suite)
13. Respectez tous les avertissements et instructions mentionnés sur la télévision.
14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système dantenne soit relié à
la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la
terre correcte de la potence et de la structure portante, à une mise à la terre du fil dentrée à une unité de
décharge dantenne, aux dimensions des conducteurs de terre, à lemplacement de lunité de décharge
dantenne, au raccordement des prises de terre ainsi qu’à leurs exigences.
15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée
pendant de longues périodes, débranchez-la et déconnectez lantenne. Vous éviterez ainsi des dommages
à votre équipement suite à la foudre et des poussées de tension.
16. Un système dantenne extérieure ne doit pas être situé à proximité de lignes aériennes ou dautres
groupes électrogènes ou circuits électriques ou dans des emplacements où lantenne pourrait tomber sur
ce type de lignes ou circuits. Lors de linstallation dun système dantenne extérieure, faites extrêmement
attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.
17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque dincendie ou
d’électrocution.
18. Nintroduisez jamais dobjets à travers les fentes du châssis, car ils pourraient entrer en contact avec des
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une
électrocution. Ne répandez jamais de liquides sur la télévision.
19. Nessayez pas de réparer vous-même votre télévision. Louverture ou le retrait des capots peut vous
exposer à une tension dangereuse ou à dautres risques. Confiez toutes les opérations de maintenance
à un personnel qualifié.
20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les
opérations de maintenance à un personnel qualifié :
A. lorsque le cordon dalimentation ou la fiche est endommagé ou effiloché ;
B. si du liquide a été répandu sur/dans la télévision ;
C. si la télévision a été exposée à la pluie ou à leau ;
D. si la télévision ne fonctionne pas normalement même en respectant le mode demploi. Réglez
uniquement les commandes abordées par le mode demploi. Des réglages inappropriés dautres
commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,
une intervention plus importante dun technicien qualifié pour que la télévision fonctionne
normalement ;
E. si la télévision a été renversée ou que le châssis est endommagé ;
F. lorsque la télévision présente une altération visible des performances cela indique un besoin de
maintenance.
21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.
22. Lorsquun remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces
de rechange spécifiées par le fabricant et quelles aient les mêmes caractéristiques que la pièce dorigine.
Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou dautres risques.
DESCENTE
DANTENNE
UNITÉ DE DÉCHARGE
DANTENNE
(NEC SECTION 810-20)
CONDUCTEURS DE TERRE
(NEC SECTION 810-21)
COLLIERS DE MISE À LA TERRE
ÉLECTRODE DE TERRE DE
LA COMPAGNIE D’ÉLECTRICITÉ
(NEC ART. 250, PARTIE H)
BOÎTIER DE
LA COMPAGNIE
D’ÉLECTRICITÉ
NEC CODE NATIONAL DE L’ÉLECTRICITÉ
COLLIER DE MISE
À LA TERRE
EXEMPLE DE MISE
LA TERRE DUNE ANTENNE
SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ
32C230(45-47) 13/3/03, 12:33 PM47
48
Dimension: 140mm x 215mm
Nomenclature (FRANÇAIS)
Panneau Avant
Référence rapide sur les commandes
TV
Fonctions de base de la télécommande
ALIMENTATION (POWER)
Appuyer Pour mettre sous tension.
Appuyer de nouveau Pour mettre
hors tension.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/
DOWN)
(k) Pour augmenter le volume du son.
(l) Pour diminuer le volume du son.
Modifie ou sélectionne les
réglages TV sur laffichage sur
écran.
RÉGLAGE (MENU)
Appuyer Accès au MENU PRINCIPAL.
Appuyer de nouveau Sortie du MENU
PRINCIPAL.
Fenêtre d’émission du signal infrarouge
AFFICHAGE (DISPLAY)
Appuyer Pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau Pour faire
disparaître le canal.
Pour afficher temporairement le canal
reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer Pour sélectionner le mode
ENTRÉE 1 vidéo externe.
Appuyer 2 fois Pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer 3 fois Pour sélec.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(a)Sélectionne le canal supérieur suivant.
(s)Sélectionne le canal inférieur précedént.
Voir pages 2830 pour prérégler les
canaux.
Déplace le curseur E sur l’écran du
MENU.
SOURDINE (MUTE)
Appuyer Mise en sourdine du son.
Appuyer de nouveau Rétablissement du
son.
Lorsque le son est coupé, SOUS-TITRE
apparaît si la fonction est disponible.
PAVE NUMERIQUE DE COMMANDE
A DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
Canal HAUT/BAS
(a)Sélectionne le canal supérieur
suivant.
(s)Sélectionne le canal inférieur
précédent.
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE (VOL)
(k) Pour augmenter le volume du son.
(l) Pour diminuer le volume du son.
PRISES DENTRÉE
VIDÉO/AUDIO
ALIMENTATION (POWER)
Appuyer Pour mettre sous tension.
Appuyer de nouveau Pour mettre
hors tension.
CAPTEUR DE
TÉLÉCOMMANDE
RÈGLAGE (MENU)
Appuyer Pour mettre sous tension.
Appuyer de nouveau Pour mettre hors
tension.
DERRIERE LE VOLET
32C230(48-49) 13/3/03, 12:33 PM48
49
Dimension: 140mm x 215mm
Avand dappeler un réparateur
Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.
(Image sombre et vide)
Remarque:
En mode TEXTE, sil ny a pas d’émission TEXTE àrecovoir, l’écran
du téléviseur pourrait être sombre et vide. Dans ce cas, placer la
mode Sous-titrage hors service.
Pour connaître lemplacement du centre de service après-vente agréé Sharp le plus proche ou pour
obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au
consommateur, appelez le 1-800-BE-SHARP.
Appel au service après-vente
LISTE DES
VÉRIFICATIONS
POUR UN
DÉPANNAGE
RAPIDE
SOLUTION POSSIBLE
Essayer un nouveau canal. S’il fonctionne, il s’agil
ptobablement d’une panne de la chaîne.
Le téléveseur est-il branché?
La prise secteur fonctionne-t-elle?
L’interrupteur POWER du téléviseur est-il sous
tension?
L’antenne est-elle raccordée aux bomes à l’arrière
de l’appareil?
Si l’antenne extérieure est utilisée, s’assurer qu’il
n’y a pas de fils sectionnés.
Vérifier s’il n’y a pas d’interférence locate ou de bruit
électrique extérieur.
Mettre l’interrupteur POWER hors tension puis de
nouveau sous tension au bout d’une minute.
Régler la commande de COULEUR.
Régler la commande de CONTRASTE.
Vérifier l’appareil vidéo/audio exterme : s’asseurer
que les câbles de connexion ne sont pas desserrés
ou cassés.
Vérifier les piles de la télécommande.
Les câbles audio sont-ils femement connectés?
Vérifier le nivear du volume.
Mettre le mode sous-titrage hors service “ARRÊT”
Mode d’économie d’énergie sur “ARRÊT”.
Débrancher le téléviseur et le rebrancher après deux
minutes.
XXXXXXX X XXXXXXX X
X XXXXXX X XXXXXXX XX X
X X XXXXX X XXXXXXX XX X
XXXXXXXX XX X X X X X XX X
XXXXXXX X XXXXXX X XX X
XXXXXXX X XXXX XXXX X X
X X XXXXX X XXXXXXX XX X
XXXXXXX X XXXXXXXX X X
XXXXXXXXX XXXX XXX X X
XXXXXXX X XXXXXXXXX X
XXX XXXX X XXXXXXXX X X
X X XXXXX X XXXXXXX XX
X X XXXXX X XXXXXXXX XX
XXX XXXX X X XXXXXXX X X
PROBLEM
Pas de reproduction dun magnéto-
scope ou lecteur de disque
Pas dimage ou de son dun appareil
vidéo/audio externe
La télécommande ne fonctionne pas
Barres sur l’écrarn
Distorsion de limage
Limage défile verticalement
Pas de couleur
Fabile réception de certains canaux
Image affaiblie
Lignes ou rayures dans l
image
Images fantômes
Image brouillée
Son normal, image médiocre
Image normale, son médiocre
Ni son, ni image
Image sombre et vide
Bruit élecrtique extérieur interférant
avec le fonctionnement du t
éléviseur
Couleur sur une partie de l
’écran
semble altérée
32C230(48-49) 13/3/03, 12:33 PM49
50
Dimension: 140mm x 215mm
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp
brand product (the Product), when shipped in its original container, will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties
other than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction
of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp
be liable or in any way responsible, for any damages or defects in the Product which were caused by
repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage.
Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: 32C230, 32 inch Color Television (Be sure to have
this information available when you need service for
your Product.)
Warranty Period for this Product: One (1) year parts and labor. The warranty period
continues for an additional one (1) year, for a total
of two (2) years, with respect to the picture tube(s)
in the Product for parts only. Labor and service are
not provided free of charge for this additional period.
Additional Item(s) Excluded from Non-rechargeable batteries.
Warranty Coverage (if any):
Where to Obtain Service: From a Sharp Authorized Servicer located in the
United States. To find the location of the nearest
Sharp Authorized Servicer, call Sharp toll free at 1-
800-BE-SHARP.
What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain
in-home service for this Product. The Servicer will
come to your home and if it is necessary to remove
the Product, the Servicer will reinstall it. Be sure to
have Proof of Purchase available.
32C230(50-52) 13/3/03, 12:33 PM50
Dimension: 140mm x 215mm
51
Notes
32C230(50-52) 13/3/03, 12:33 PM51
Printed in Mexico
TINS-A709WJZZ
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
32C230(50-52) 13/3/03, 12:33 PM52
1 / 1

Sharp 32C230 Manual de usuario

Categoría
Televisores CRT
Tipo
Manual de usuario
Este manual también es adecuado para

En otros idiomas