Black Box LGC215A-R2 Manual de usuario

USER MANUAL

24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM

LGC215A-R2

Media Converter

10G Base-T to 10G Base-R

10/100/1000Base-T to 1000Base-X

POE+ Gigabit Ethernet Converter SFP

UTP

RX

ACT

Link

10G

SD

PWR

Link

ACT

10/100/1000BT

TO 1000BX

POE+ GB MEDIA

CONVERTER

2

TABLE OF CONTENTS

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

1. SPECIFICATIONS ................................................................................................................................................................................................. 3

2. OVERVIEW ............................................................................................................................................................................................................ 4

2.1 Introduction .......................................................................................................................................................................................................... 4

2.2 What’s Included ................................................................................................................................................................................................... 4

2.3 Hardware Description ......................................................................................................................................................................................... 4

3. LINK-FAULT PASSTHROUGH (LFP) .................................................................................................................................................................. 6

4. INSTALLING THE CONVERTER ......................................................................................................................................................................... 7

5. POE FUNCTION .................................................................................................................................................................................................... 8

APPENDIX A: TWISTED-PAIR AND FIBER CABLES ........................................................................................................................................... 9

A.1 RJ-45 Cable Pin Assignment ............................................................................................................................................................................. 9

A.2 Fiber Optic Cable .............................................................................................................................................................................................. 10

APPENDIX B: REGULATORY INFORMATION ......................................................................................................................................................11

B.1 FCC Statement ...................................................................................................................................................................................................11

B.2 NOM Statement ................................................................................................................................................................................................ 12

APPENDIX C: DISCLAIMER/TRADEMARKS ..................................................................................................................................................... 13

C.1 Disclaimer .......................................................................................................................................................................................................... 13

C.2 Trademarks Used in this Manual ..................................................................................................................................................................... 13

3

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

TABLE 1-1. SPECIFICATIONS

SPECIFICATION DESCRIPTION

Approvals FCC Class B, CE, RoHS

Description

Pure Networking Copper to Fiber Media Converter - 10/100/1000BASE-TX to 1000BASE-X SFP PoE+

Connectors

(1) RJ-45, (1) SFP cage

Media Supported

UTP: CAT5/5e/6;

Fiber: Multimode (MM): 50/125 µm or 62.5/125 µm;

Fiber Single-mode (SM): 9/125 µm

Distance

CATx: 328 ft. (100 m)

Forwarding Rate

10 Mbps: 14,880 pps, 100 Mbps: 148,800 pps, 1000 Mbps: 1,480,000 pps

Frame Sizes

Up to 9216 bytes

Power

Media converter: 48 VDC, 72 W, barrel connector;

External power adapter included: In-line type, 100-240 VAC, 50/60 Hz, 48 VDC, 1.5 A, IEC320 C13/

C14, with US power cord

Standards

IEEE 802.3, IEEE 802.3U, 10/100BASE-TX, 100BASE-FX, IEEE 802.3x flow control for full-duplex mode,

802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3at PoE+ (25W)

Dimensions

1” H x 3.7” W x 2.7” D (2.5 x 9.4 x 6.9 cm)

Weight 0.7 lb. (0.3 kg)

Temperature

Operating: 32 to 122° F (0 to 50° C);

Storage: -4 to +158° F (-20 to +70° C)

Mounting

Standalone

CHAPTER 1: SPECIFICATIONS

4

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 2: OVERVIEW

2.1 INTRODUCTION

The 10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP supports Gigabit copper and fiber media for network

connection. This converter can be used as a standalone unit.

2.2 WHAT’S INCLUDED

Before you start installing the Converter, verify that the package contains the following:

10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP

48-VDC power adapter

Power cord

If anything is missing or damaged, contact Black Box Technical Support at 877-877-2269 or info@blackbox.com

2.3 HARDWARE DESCRIPTION

Figures 2-1 and 2-2 show the front and back panels of the converter. Table 2-1 describes its components.

1 2 3

FIGURE 2-1. FRONT PANEL

4 5

FIGURE 2-2. BACK PANEL

5

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 2: OVERVIEW

TABLE 2-1. MEDIA CONVERTER COMPONENTS

NUMBER IN FIGURE 2-1 OR 2-2 COMPONENT DESCRIPTION

1 SFP cage SFP module installs here

2

LED indicators

See Table 2-2

3

RJ-45 connector

Links to RJ-45 cable

4

Barrel connector for power

Links to 47–57-VDC power supply

5

4-position DIP switch

Set for LFP or 10M operation

TABLE 2-2. LED INDICATORS

LED NAME STATUS DESCRIPTION

PWR ON Power is ON and normal

FX Link/ACT

ON

Connection Status display for fiber link. ON indicates that the fiber link is correctly connected

Blinking

Packet is being transmitted through the FX end

OFF Port link is down

SD

ON

Fiber signal is detected

OFF

No fiber signal detected

1000M

ON

Link is operating at 1000 Mbps

OFF Link is operating at 10/100 Mbps

TX Link/Act

ON

Connection status display for copper link. ON indicates that the link is correctly connected

Blinking

Active status display of copper link. Packet is being transmitted through the TX end

OFF

Port link is down

PoE

ON

Port is provided 52-VDC power toa remote powered device (PD)

OFF Port is not providing 52-VDC power to a remote powered device (PD)

TABLE 2-3. DIP SWITCHES

DIP SWITCH NAME NUMBER (S) STATUS DESCRIPTION

LFP

1, 2 Both ON

Turn ON the Link Fault Passthrough (LFP) detection

1, 2 Both OFF

Turn OFF the Link Fault Passthrough (LFP) detection

10M

3, 4 Both ON

Twisted-pair link is operating at 10 Mbps

3, 4 Both OFF

Twisted-pair link is operating

at 100/1000 Mbps

6

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 3: LINK FAULT PASSTHROUGH (LFP)

The Link Fault Pass-Through (LFPT) is a troubleshooting feature that combines TX and FX LinkLoss from both the local and remote

media converters, TX-FX/SFP modules. LFPT is enabled by turning on the DIP switch on both modules. This feature allows either

end of the conversion to detect a link fault occurring at the other end of the media conversion chain.

Management

Station

Switch/Hub

w/SNMP

Media

Management

Switch/Hub

Converter

Media

Converter

LFP ON LFP ON

Fiber CableTP TP

1 2 3

FIGURE 3-1. LFP FUNCTION

Regardless if there is a break in segment 1, 2 or 3, the link will drop on the switches at both ends. The link fault is passed through

the media conversion and is observed at each end. It acts just like it would if the devices were directly connected.

7

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 4: INSTALLING THE CONVERTER

Follow these steps to install the PoE+ Media converter:

1. Turn off the power of the device/station in a network to which the Switch will be attached.

2. Ensure that there is no activity in the network.

3. Install the SFP module.

TABLE 4-1. COMPATIBLE SFPS

PART NUMBER DESCRIPTION

LFP411

SFP - 1250-Mbps, Extended Diagnostics, 850-nm Multimode Fiber, 550-m, LC

LFP412

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Multimode Fiber, 2-km, LC

LFP413

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 10-km, LC

LFP414

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 30-km, LC

LFP418

SFP - 1250-Mbps, Extended Diagnostics, 1550-nm Single-Mode Fiber, 80-km, LC

LFP420, LFP421

SFP - 1250-Mbps, Extended Diagnostics, 1550-nm TX, 1310-nm RX, Simplex, Single-Mode Fiber, 10-km, LC;

SFP - 1250-Mbps, Extended Diagnostics, 1310-nm TX, 1550-nm RX, Simplex Single-Mode Fiber, 10-km, LC

LFP416

SFP - 1250-Mbps, Extended Diagnostics, 10/100/1000BASE-T, SGMII Interface, RJ-45

NOTE: LFP420, LFP421 are single-strand fiber SFPs, so they must be used in pairs.

NOTE: Use the LFP416 for a copper interface.

NOTE: Only the built-in copper interface will do PoE.

4. Attach a fiber cable from the Switch to the fiber network.

5. Attach a CAT5/5e/6 UTP cable from the 10/100/1000BASE-T network to the RJ-45 port on the switch.

6. Connect the 48-VDC power adapter to the switch and verify that the Power LED lights up.

7. Turn on the power of the device/station, the TX Link and FX Link LEDs should light when all cables are attached.

8

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

CHAPTER 5: POE FUNCTION

Before your installation, we recommended that you check your network environment. If there is an IEEE 802.3at/802.3af device you

need to power on, the switch can provide a way to supply power for this Ethernet device conveniently and easily. The Switch equips

an AC-DC adapter with 52-VDC input and it injects the DC power into the pin of the twisted pair cable (Pin 1, 2, 3 and 6).

550m~120km 100 meters

LGC215A-R2

PoE+ camera

Switch

Data Data + Power

Fiber optic cable Twisted-pair cable

FIGURE 5-1. POE INSTALLATION

9

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX A: TWISTED-PAIR AND FIBER CABLES

A.1 RJ-45 CABLE PIN ASSIGNMENT

There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following diagrams show the pin allocation and

color of straight cable and crossover cable connections.

1

234568

7

1 2 3 6

FIGURE A-1. RJ-45 CONNECTOR PINNING

1 2 3 4 5 6 7 8

FIGURE A-1. STRAIGHT-THROUGH AND CROSSOVER CABLE PINNING

NOTE: Make sure your connected cables have the correct pin assignment and color as above picture before deploying the cables

into your network.

SIDE 1 SIDE 2

1 - White/Orange 1 - White/Orange

2 - Orange 2 - Orange

3 - White/Green 3 - White/Green

4 - Blue 4 - Blue

5 - White/Blue 5 - White/Blue

6 - Green 6 - Green

7 - White/Brown 7 - White/Brown

8 - Brown 8 - Brown

SIDE 1 SIDE 2

1 - White/Orange 1 - White/Green

2 - Orange 2 - Green

3 - White/Green 3 - White/Orange

4 - Blue 4 - Blue

5 - White/Blue 5 - White/Blue

6 - Green 6 - Orange

7 - White/Brown 7 - White/Brown

8 - Brown 8 - Brown

STRAIGHT- THROUGH CABLE PINNING

CROSSOVER CABLE PINNING

10

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX A: TWISTED-PAIR AND FIBER CABLES

A.2 FIBER OPTIC CABLE

TABLE A-1. FIBER OPTIC PATCH CABLE

STANDARD FIBER TYPE CABLE SPECIFICATION

1000BASE-SX (850 nm)

Multimode

50/125 µm or 62.5/125 µm

1000BASE-LX (1300 nm)

Multimode

50/125 µm or 62.5/125 µm

Single-mode

9/125 µm

11

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX B: REGULATORY INFORMATION

B.1 FCC STATEMENT

Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. However, there is no guarantee that interference will not occur in a particular installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or telephone

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult an experienced radio/TV technician for help.

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

To meet FCC requirements, shielded cables and power cords are required to connect this device to a personal computer or other

Class B certified device.

This digital apparatus does not exceed the Class B limits for radio noise emission from digital apparatus set out in the Radio

Interference Regulation of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques

de classe B prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.

12

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX B: REGULATORY INFORMATION

B.2 NOM STATEMENT

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado

o cerca de una alberca, etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de

operación. Todo otro servicio deberá ser referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato

eléctrico sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libre-

ros o gabinetes que impidan el flujo de aire por los orificios de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estu-

fas u otros aparatos (incluyendo amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación,

o como se indique en el aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos

colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de

ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato;o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

13

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

APPENDIX C: DISCLAIMER/TRADEMARKS

C.1 DISCLAIMER

Black Box Corporation shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover

damages, resulting from any errors in the product information or specifications set forth in this document and Black Box Corporation

may revise this document at any time without notice.

C.2 TRADEMARKS USED IN THIS MANUAL

Black Box and the Black Box logo type and mark are registered trademarks of Black Box Corporation.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

14

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NOTES

__________________________________________________________________________________________________

_

_________________________________________________________________________________________________

__________________________________________________________________________________________________

__________________________________________________________________________________________________\

__________________________________________________________________________________________________

_

15

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM

NOTES

_________________________________________________________________________________________________

__________________________________________________________________________________________________

_

_________________________________________________________________________________________________

__________________________________________________________________________________________________

__________________________________________________________________________________________________\

__________________________________________________________________________________________________

NEED HELP?

LEAVE THE TECH TO US

LIVE 24/7

TECHNICAL

SUPPORT

1.877.877.2269

LGC215A-R2_USER_REV1.PDF

Black Box LGC215A-R2 Manual de usuario

Este manual también es adecuado para

Black Box LGC215A-R2 Manual de usuario

En otros idiomas

Documentos relacionados

Otros documentos