Yamaha HTR-5063 El manual del propietario

Marca: Yamaha

Modelo: HTR-5063

Categoría: Receptores AV

Tipo: El manual del propietario

Owner’s Manual

AV Receiver English

En 2

CONTENTS

INTRODUCTION

Features and capabilities ...................................................3

About this manual............................................................. 4

Supplied accessories......................................................... 4

Part names and functions.................................................. 5

Front panel........................................................................5

Rear panel.........................................................................6

Front panel display ........................................................... 7

Remote control .................................................................8

CONNECTIONS

Connecting speakers ..........................................................9

Speaker channels and functions........................................ 9

Speaker layout ................................................................ 10

Connecting speakers and subwoofer ..............................11

Connecting external components....................................14

Cable plugs and jacks .....................................................14

Connecting a TV monitor...............................................15

Connecting BD/DVD players and other devices............18

Connecting video cameras and portable audio players .. 22

Transmitting input A/V to external components ............ 22

Connecting the FM/AM antennas ..................................23

Set up the speaker parameters automatically

(YPAO) .............................................................................. 24

PLAYBACK

Basic playback procedure ...............................................29

Adjusting high/low-frequency sound (Tone control) ..... 29

Changing input settings with a single key

(SCENE function) ............................................................30

Registering input sources/sound field program .............. 30

Enjoying sound field programs....................................... 30

Selecting sound field programs and sound decoders...... 30

Sound field programs .....................................................33

FM/AM tuning ................................................................. 35

Selecting a frequency for reception (Normal tuning)..... 35

Registering and recalling a frequency (Preset tuning) ... 36

Recalling a preset station................................................ 38

Clearing preset stations .................................................. 38

Radio Data System tuning

(U.K. and Europe models only) ..................................... 38

Playing back tunes from your iPod™/iPhone™ ........... 40

Connecting the Yamaha iPod universal dock ................. 40

Controlling an iPod™/iPhone™ .................................... 40

Playing back tunes from Bluetooth™ components....... 43

Connecting a Yamaha Bluetooth wireless audio

receiver ........................................................................... 43

Pairing Bluetooth™ components ................................... 43

Using Bluetooth™ components ..................................... 44

SETUP

Configuring the settings specific for each input source

(Option menu) .................................................................. 45

Option menu display and setup ...................................... 45

Option menu items ......................................................... 45

Setting various functions (Setup menu)......................... 49

Setup menu display and settings .................................... 49

Setup menu items ........................................................... 50

Manages settings for speakers........................................ 50

Setting the audio output function of this unit................. 54

Setting HDMI functions ................................................. 55

Making the receiver easier to use ................................... 58

Setting the sound field program ..................................... 59

Prohibiting setting changes ............................................ 59

Setting sound field program parameters ....................... 60

CINEMA DSP parameters ............................................. 61

Parameters usable in certain sound field programs ........ 61

Parameters usable in surround decoder .......................... 62

Controlling other components with the remote

control ............................................................................... 63

Keys connecting external components ........................... 63

Default remote control code settings.............................. 63

Registering remote control codes for external

component operations .................................................... 64

Resetting all remote control codes ................................. 65

Extended functionality that can be configured

as needed (Advanced Setup menu) ................................ 66

Displaying/Setting the Advanced Setup menu............... 66

Setting the impedance of speakers

(U.S.A. and Canada models only).................................. 66

Avoiding crossing remote control signals when using

multiple Yamaha receivers ............................................. 66

High quality playback using bi-amplification

connections .................................................................... 67

Removing HDMI video output up-scaling limits .......... 67

Changing FM/AM frequency steps

(Asia and General models only)..................................... 67

Initializing various settings for this unit ........................ 67

Using the HDMI Control function ................................. 68

APPENDIX

Troubleshooting ............................................................... 71

General........................................................................... 71

HDMI™ ......................................................................... 74

Tuner (FM/AM) ............................................................. 74

iPod™/iPhone™ ............................................................ 75

Bluetooth™.................................................................... 76

Remote control............................................................... 76

Glossary............................................................................ 77

Audio information.......................................................... 77

Sound field program information................................... 78

Video information .......................................................... 78

Information on HDMI™................................................. 79

About trademarks ........................................................... 79

Specifications.................................................................... 80

Index ................................................................................. 82

En 3

INTRODUCTION

■ Built-in high-quality, high-power 7-channel amplifier

■ 1-button input/sound field program switching (SCENE function) .......................30

■ Speaker connections for 2- to 7.1-channel configurations

– (U.S.A. and Canada models only) Speaker impedance configuration.....................................................12

– Speaker channels and functions .................................................................................................................9

– Speaker layout..........................................................................................................................................10

– Speaker cable connection.........................................................................................................................11

– Subwoofer cable connection ....................................................................................................................13

– High quality playback using bi-amplification connections .....................................................................13

■ Acoustic parameter adjustment to match your speakers and listening

environment

– Automatic settings for speaker acoustic parameters

(YPAO - Yamaha Parametric Room Acoustic Optimizer).......................................................................24

– Specifying the settings for each speaker ..................................................................................................50

– Volume control for each speaker..............................................................................................................52

– Speaker distance settings .........................................................................................................................52

– Sound quality control with the equalizer <Graphic Equalizer> ..............................................................52

– Test tone speaker adjustment ...................................................................................................................53

– Bass and treble level adjustment <Tone Control> ...................................................................................29

■ External component connection (max. 14 inputs) and playback

– External component connection...............................................................................................................15

– Audio signal output from the TV transmitted through the HDMI jack ...................................................57

– HDMI/AV video input combining other audio input...............................................................................47

– Correction of lag between audio and video signals <Lipsync>...............................................................54

– Protective cover for front panel jacks ........................................................................................................4

– Input source name changing <Input Rename> ........................................................................................58

– Configuring the settings specific for each input source <Option menu> ................................................45

– Playback from external components........................................................................................................29

– Playback from an iPod/iPhone (iPod/iPhone and components sold separately) .....................................40

– Playback from a Bluetooth component (Bluetooth and components sold separately) ............................43

■ HDMI settings

– Setting the HDMI functions.....................................................................................................................55

– Controlling this unit from HDMI compatible device such as TVs <HDMI Control function> ..............68

– Listening to TV audio with single HDMI cable connection <Audio Return Channel function>............70

– Changing HDMI video output up-scaling resolution ..............................................................................57

– Removing HDMI video output up-scaling limits ....................................................................................67

■ FM/AM tuner

– FM/AM broadcast listening .....................................................................................................................35

– Simple preset tuning ................................................................................................................................36

– (U.K. and Europe models) Radio Data System tuning ............................................................................38

– (U.K. and Europe models) Automatic traffic information reception.......................................................39

– Changing FM mode (Stereo/Monaural)...................................................................................................36

– (Asia and General models only) Changing FM/AM frequency steps initializing various settings

for this unit...............................................................................................................................................35

■ Multi-channel, multi-format playback

– Sound field effect selection......................................................................................................................30

– Playback without sound field effects .......................................................................................................31

– Stereo playback........................................................................................................................................31

– Sound field effect configuration ..............................................................................................................60

– Compressed-music playback ...................................................................................................................30

– Setting the decode format of digital audio signals <Decoder Mode> .....................................................46

– Selecting the 5.1-channel signal playback method <Extended Surround> .............................................46

■ Front panel information display/OSD (On-Screen Display) on the TV screen

– Front panel display information switching ................................................................................................7

– Front panel display brightness adjustment <Dimmer>............................................................................59

– Adjusting the position of the on-screen display <OSD Shift> ................................................................59

– Digital video/audio signal information display <Signal Info> ................................................................47

■ Volume adjustment functions

– Easy listening at low volumes <Adaptive DRC> ....................................................................................54

– Maximum volume settings.......................................................................................................................55

– Startup volume settings............................................................................................................................55

– Adjusting volume between input sources <Volume Trim> .....................................................................46

■ Remote control operation

– External component operation with this unit’s remote control................................................................63

– Multiple Yamaha receiver operation without signal interference <Remote ID Switching>....................66

■ Other features

– Standby mode after prolonged non-operation <Auto Power Down function>........................................59

– Standby mode after a specific amount of time <Sleep timer>...................................................................8

– To charge the iPod/iPhone when this unit is in standby mode <iPod Standby Charge> .........................42

– Initializing various settings for this unit ..................................................................................................67

– Prohibiting setting changes of this unit <Memory Guard> .....................................................................59

Features and capabilities

En 4

INTRODUCTION

Features and capabilities

About this manual

Supplied accessories

Check that you received all of the following parts.

• Remote control

• Batteries (AAA, R03, UM-4) x 2

• YPAO microphone

• AM loop antenna

• Indoor FM antenna

• VIDEO AUX input cover

• Some features are not available in certain regions.

• This manual is created prior to production. Design and

specifications are subject to change in part as a result of

improvements, etc. In case of differences between the manual and

product, the product has priority.

• “

dHDMI1” (example) indicates the name of the parts on the

remote control. Refer to the “Part names and functions” (☞

p. 5)

for the information about each position of the parts.

• J

1 indicates that the reference is in the footnote. Refer to the

corresponding numbers on the bottom of the page.

• ☞

indicates the page describing the related information.

• Click on the “ ” at the bottom of the page to display the

corresponding page in “Part names and functions.”

Front panel

Rear panel

Front panel display

Remote control

■ Attaching the VIDEO AUX input cover (supplied)

To protect against dust, attach the supplied VIDEO AUX input

cover to the VIDEO AUX jacks when you do not use the jacks.

To remove the cover, push the left section of it.

Attach the cover

PUSH

Remove the cover

■ Installing batteries in the remote control

When inserting batteries in the remote control, remove the

battery compartment cover from the reverse side of the remote

control, and insert two AAA batteries into the battery

compartment so that they match with the polarity markings (+

and -).

Replace the batteries with new ones if the following symptoms

become evident:

• The remote control can only be operated within a narrow range.

•

bTRANSMIT does not light up, or only lights dimly.

NOTE

If there are remote control codes for external components

registered to the remote control, removing the batteries for more

than 2 minutes, or leaving exhausted batteries in the remote

control, may clear the remote control codes. If this should occur,

replace the batteries with new ones, and set the remote control

codes.

Battery compartment

cover

Battery compartment

En 5

INTRODUCTION

Front panel

a A (Power)

Switches this unit between on and standby mode.

b HDMI Through/iPod Charge indicator

Lights up in any of the following cases while the unit is in standby

mode.

• When Standby Through function is enabled and audio/video from

an external component connected with HDMI is output to a TV

during the standby mode (☞

p. 56). J1

• When an iPod is charging in the Yamaha iPod universal dock

during the standby mode (☞

p. 42).

c YPAO MIC jack

Connect the supplied YPAO microphone and adjust the speaker

balance automatically (☞

p. 24).

d INFO

Changes the information displayed on the front panel display (☞

p. 7).

e MEMORY

Registers FM/AM stations as preset stations (☞

p. 37). J2

f PRESET j / i

Selects an FM/AM preset station (☞

p. 38). J2

g FM

Sets the FM/AM tuner band to FM (☞

p. 35). J2

h AM

Sets the FM/AM tuner band to AM (☞

p. 35). J2

i TUNING jj / ii

Changes FM/AM tuner frequencies (☞

p. 35). J2

j Front panel display

Displays information on this unit (☞

p. 7).

k DIRECT

Switches this unit to direct mode (☞

p. 32).

l PHONES jack

For plugging headphones in. Sound effects applied during playback

can also be heard through the headphones.

m INPUT l / h

Selects an input source from which to playback. Press either the left or

right key repeatedly to cycle through the input sources in order.

n SCENE

Switches the input source and the sound field program with a single

button (☞

p. 30). When this unit is in standby mode, press this key to

switch on.

o TONE CONTROL

Adjusts high-frequency/low-frequency output of speakers/headphones

(☞

p. 29).

p PROGRAM l / h

Switches between the sound field effect (sound field program) you are

using and the surround sound decoder (☞

p. 30). Press either the left

or right key repeatedly to cycle through the input sources in order.

q STRAIGHT

Changes a sound field program to straight decoding mode (☞

p. 31).

r VIDEO AUX jacks

For connecting video cameras, game consoles, and portable music

players to this unit temporarily.

Attach the supplied VIDEO AUX input cover when not using this

jack.

s VOLUME

Adjusts the volume level.

Part names and functions

When the HDMI Control functions are “On” (☞p. 56), then

this stays on during standby mode.

VIDEO

AUX

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

VOLUME

DVD

RADIO

INPUT

PROGRAM

SCENE

VIDEO

AUDI O

PORTABLE

INFO

MEMORY

PRESET

FM AM

TUNING

YPAO MIC DIRECT

o qm p

nl s

d gf h ke i

1 : During the standby mode, you can select the HDMI input (HDMI1-4) to output to a TV. When the input is changed correctly, HDMI Through/iPod Charge indicator blinks twice.

2 : Usable when you have selected tuner input.

En 6

INTRODUCTION

Part names and functions

Rear panel

a DOCK jack

For connecting an optional Yamaha iPod universal dock (such as

YDS-12) or Bluetooth wireless audio receiver (YBA-10) (☞

p. 40,

☞

p. 43).

b HDMI OUT jack

For connecting an HDMI - compatible TV to output audio/video

signals (☞

p. 16).

c HDMI1-4 jacks

For connecting external components equipped with HDMI-

compatible outputs to receive audio/video signals (☞

p. 18).

d AV1-6 jacks

For connecting to external components equipped with audio/video

outputs to receive audio/video signals (☞

p. 19, p. 20).

e AV OUT jacks

For outputting audio/video signals received when analog inputs (AV3-

6 or AUDIO1-2) are selected (☞

p. 22).

f ANTENNA jacks

For connecting AM and FM antennas (☞

p. 23).

g AUDIO1-2 jacks

For connecting to external components equipped with analog audio

outputs to input sound into this unit (☞

p. 21).

h MONITOR OUT jacks

i AUDIO OUT jacks

For outputting audio signals received when analog jacks, such as the

AV5-6 or AUDIO1-2 are selected (☞

p. 22).

j SPEAKERS terminals

For connecting the front, center, surround and surround back speakers

(☞

p. 12).

k SUBWOOFER jack

For connecting a subwoofer with a built-in amplifier (☞

p. 13).

l VOLTAGE SELECTOR

(Asia and General models only)

Select the switch position according to your local voltage (Refer to

Quick Reference Guide).

m Power cable

For connecting this unit to an AC wall outlet.

VIDEO jack For connecting a TV capable of receiving video

input, and outputting video signals to it (☞p. 16).

COMPONENT

VIDEO jacks

For connecting TV that are compatible with

component video signals, using three cables to

output video signal (☞p. 16).

COMPONENT

VIDEO

OPTICAL OPTICAL

(

)

AUD

IO 1

AUDIO 2

COAXIAL COAXIAL

(

)

CENTER

SURROUND

SINGLE

SURROUND BACK/

BI-AMP

(

BD/DVD

)

HDMI 2HDMI 1 HDMI 3

HDMI 4

FRONT

HDMI

OUT

SUBWOOFER

AUDIO

PRE OUT

OUT

VIDEO

DOCK

ARC

S VIDEO

ANTENNA

75ǡ

GND

MONITOR OUT

COMPONENT

VIDEO

SPEAKERS

HDMI

OUT

SUBWOOFER

AUDIO

PRE OUT

OUT

ARC

COMPONENT

VIDEO

AV 6

AUD

IO 1

AUD

IO 2

ENTE

URR

UND

URROUND BACK/

AMP

(

BD/DVD

)

HDMI 2

HDMI 1

HDMI

ANTENNA

SPEAKERS

ekgij

d h

Distinguishing the input and output jacks

The area around the audio/video output jacks is

marked in white to prevent connection errors. Use

these jacks to output audio/video signals to a TV or

other external component.

Output jacks

(Ex: U.K. and Europe models)

En 7

INTRODUCTION

Part names and functions

Front panel display

a HDMI indicator

Lights up during normal HDMI communication when any of the

HDMI 1-4 inputs are selected.

b CINEMA DSP indicator

Lights up when a sound field effect that uses CINEMA DSP

technology is selected.

c Tuner indicator

Lights up when receiving an FM/AM broadcast.

d SLEEP indicator

Lights up when the sleep timer is on (☞

p. 8).

e MUTE indicator

Flashes when audio is muted.

f VOLUME indicator

Displays the current volume level.

g Cursor indicators

Light up if corresponding cursors on the remote control are available

for operations.

h Multi information display

Displays a range of information on menu items and settings.

i Speaker indicators

Indicate speaker terminals from which signals are output.

SL SR

SBL SBRSB

Front speaker L

Surround speaker L

Subwoofer

Front speaker R

Surround speaker R

Center speaker

Surround back

speaker L

Surround back

speaker R

Surround back

speaker J1

■ Changing the front panel display

The front panel can display sound field programs and surround

decoder names as well as the active input source.

Press fINFO repeatedly to cycle through input source →

sound field program → surround decoder in order. J2

SL SR

SBL SBR

Straight

HDMI1

VOL.

Input source name

Sound field program (DSP program)

STEREO

SLEEP

VOL.

TUNED

SL SR

MUTE

SBL SBRSB

abcdfe

gh ig

1 : “SB” is displayed when using a 6.1-channel configuration only.

2 : While selecting a tuner input, the FM/AM frequency is displayed instead of the input source.

En 8

INTRODUCTION

Part names and functions

Remote control

a Remote control signal transmitter

Transmits infrared signals.

b TRANSMIT

Lights up when a signal is output from the remote control.

c SOURCE A (SOURCE Power)

Switches an external component on and off.

d Input selector

Select an input source on this unit from which to playback.

e Tuner keys

Operates the FM/AM tuner. These keys are used when using the tuner

input.

f INFO

Cycles the information displayed on the front panel display (the name

of the currently selected input source, the sound field program, the

surround decoder, the FM/AM tuner frequency, etc.)(☞

p. 7).

g Sound selection keys

Switch between the sound field effect (sound field program) you are

using and the surround decoder (☞

p. 30).

h SCENE

Switches the input source and the sound field program with a single

button (☞

p. 30). When this unit is in standby mode, press this key to

switch on.

i SETUP

Displays a detailed Setup menu for this unit (☞

p. 49).

j Cursor B / C / D / E, ENTER, RETURN

k External component operation keys

Operate recording, playback, and menu displays etc. for external

components. J1

l Numeric keys

Enter numbers.

m TV control keys

Operate a monitor such as a TV.

n CODE SET

Sets remote control codes for external component operations (☞

p. 63,

p. 67

o RECEIVER A (RECEIVER Power)

Switches this unit between on and standby mode.

p SLEEP

Switch this unit to standby mode automatically after a specified period

of time has elapsed (sleep timer). Press this key repeatedly to set the

time for the sleep timer function.

The SLEEP indicator (☞

p. 7) lights up when the sleep timer is on.

q OPTION

Displays the Option menu for each input source (☞

p. 45).

r VOLUME +/-

Adjusts the volume level (☞

p. 29).

s MUTE

Turns the mute function of the sound output on and off (☞

p. 29).

RECEIVER

SCENE

OPTION

SETUP

RETURN

VOLUME

ENHANCER

SUR. DECODE

STRAIGHT DIRECT

HDMI

AUDIO

TRANSMIT

SLEEP

1234

1256

V-AU X

TUNER

INFO

MEMORY

PRESET

TUNING

MOVIE MUSIC

STEREO

DVD

RADIO

MUTE

ENTER

7 856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

CODE SET

INPUT

MUTE

DOCK[ A ] [ B ]

HDMI1-4 HDMI1-4 jacks

AV1-6 AV1-6 jacks

AUDIO1-2 AUDIO1-2 jacks

V-AUX Front panel VIDEO AUX jacks

[A]/[B] Changes the external component to operate with

the kExternal component operation keys

without changing inputs. J1

DOCK A Yamaha iPod universal dock or Bluetooth

wireless audio receiver connected to the DOCK

jack.

TUNER FM/AM tuner

FM Sets the FM/AM tuner band to FM.

AM Sets the FM/AM tuner band to AM.

MEMORY Presets radio stations.

PRESET F / G Selects a preset station.

TUNING H / I Changes tuning frequencies.

Cursor B / C / D / E Select menu items and change settings when

setting menus, etc, are displayed.

ENTER Confirms a selected item.

RETURN Returns to the previous screen when setting

menus are displayed, or ends the menu display.

Sleep 120min. Sleep 90min.

Sleep 60min.Sleep 30min.Sleep Off

1 : You can use kExternal component operation keys for each input source to operate registered components. Remote control codes must be registered for each input

in advance if you want to operate external components (☞

p. 63).

En 9

CONNECTIONS

This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and

connections in your listening environment.

Speaker channels and functions

■

Front left and right speakers

The front speakers are used for the front channel sounds (stereo

sound) and effect sounds.

Front speaker layout:

Place these speakers at an equal distance from the ideal listening

position in the front of the room. When using a projector screen,

the appropriate top positions of the speakers are about 1/4 of the

screen from the bottom.

■

Center speaker

The center speaker is for the center channel sounds (dialog, vocals,

etc.).

Center speaker layout:

Place it halfway between the left and right front speakers. When

using a TV, place the speaker just above or just under the center of

the TV with the front surfaces of the TV and the speaker aligned.

When using a screen, place it just under the center of the screen.

■

Surround left and right speakers

The surround speakers are for effect and vocal sounds with the 5.1-

channel speakers providing rear-area sounds. When used with 6.1/

7.1-channel (including surround back channel), sound for right and

left rear-area is output.

Surround speaker layout:

Place the speakers at the rear of the room on the left and right sides

facing the listening position. They should be placed between 60

degrees and 80 degrees from the listening position and with the

speaker tops at a height of 1.5 – 1.8 m from the floor.

■

Surround back left and right speakers

Outputs the rear effect. When used with 6.1ch sound, sound from

the left and right sound surround back speakers is mixed and output

from a single speaker. When used with 5.1ch sound, sound from

surround back speakers is distributed between the left and right

surround speakers.

Surround back speaker setting:

When used with 7.1ch sound, arrange the left and right speakers

towards the listening position, to the rear of the listening position.

Arrange the left and right speakers at least 30 cm apart. The same

separation as with the front left and right speakers is optimum.

When used with 6.1ch sound, arrange these to the rear of the

listening position.

■

Subwoofer

The subwoofer speaker is used for bass sounds and low-frequency

effect (LFE) sounds included in Dolby Digital and DTS. Use a

subwoofer that is equipped with built-in amplifier.

Subwoofer speaker layout:

Place it exterior to the front left and right speakers facing slightly

inward to reduce echoes from the wall.

Connecting speakers

Ex.

En 10

CONNECTIONS

Connecting speakers

Speaker layout

■ 7.1-channel speaker layout

(7 speakers + subwoofer)

■ 6.1-channel speaker layout

(6 speakers + subwoofer)

■ 5.1-channel speaker layout

(5 speakers + subwoofer)

• Connect at least two speakers (front left and right).

• If you cannot connect all five speakers, give priority to the

surround speakers.

• The surround speakers should be placed between 60 degrees and

80 degrees from the listening position.

• When used with 7.1-channel speaker layout, arrange the left and

right surround back speakers at least 30 cm a part.

60q

80q

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Surround back

speaker R

Surround back

speaker L

30 cm (12 in)

or more

■ CRT monitors

We recommend that you use magnetically shielded speakers to

avoid video distortion, especially for the front and center

speakers near the screen.

If your screen still gets interference from magnetically shielded

speakers, move the speakers farther away from your TV.

60q

80q

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

Surround back

speaker

60q

80q

Front speaker L

Front speaker R

Subwoofer

Center speaker

Surround speaker L

Surround

speaker R

En 11

CONNECTIONS

Connecting speakers

Connecting speakers and subwoofer

Connect your speakers to their respective terminals on the rear panel.

■ 7.1-channel speaker connection

(7 speakers + subwoofer)

■ 6.1-channel speaker connection

(6 speakers + subwoofer)

■ 5.1-channel speaker connection

(5 speakers + subwoofer)

CAUTION

• Remove the AC power cable of this unit from the power outlet before connecting the speakers.

• Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”

(positive, red) terminal on this unit and the speakers, and the other cable into the “-” (negative, black) terminal.

• Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP

WIRES!” will appear on the front panel display when this unit is switched on.

CENTER

SURROUND

SINGLE

SURROUND BACK/

BI-AMP

HDMI 3

HDMI 4

FRONT

SUBWOOFER

AUDI O

PRE OUT

OUT

SPEAKERS

SubwooferCenter speaker

Front speaker Surround

speaker

Surround back

speaker

RL RL

CENTER

SURROUND

SINGLE

SURROUND BACK/

BI-AMP

HDMI 3

HDMI 4

FRONT

SUBWOOFER

AUDI O

PRE OUT

OUT

SPEAKERS

SubwooferCenter speaker

Front speaker Surround

speaker

Surround back

speaker

CENTER

SURROUND

SINGLE

SURROUND BACK/

BI-AMP

HDMI 3

HDMI 4

FRONT

SUBWOOFER

AUDI O

PRE OUT

OUT

SPEAKERS

SubwooferCenter speaker

Front speaker Surround

speaker

En 12

CONNECTIONS

Connecting speakers

■

(U.S.A. and Canada models only)

Changing speaker impedance

This unit is configured for 8Ω speakers as the factory setting.

When connecting to 6Ω speakers, carry out the following

procedure to switch to 6Ω.

Switch this unit to the standby mode.

Press A while pressing and holding STRAIGHT on

the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display.

After approximately a few seconds, the top menu items are

displayed. J1

Check that “SP IMP.” is displayed on the front panel.

Press STRAIGHT repeatedly to select a “6ΩMIN.”

Switch this unit to the standby mode, and then

switch it on again.

The power turns on, when the settings you made has been

configured.

■

Connecting speakers

Remove approximately 10 mm of insulation from the

ends of the speaker cables, and twist the bare wires

of the cables together firmly so that they will not

cause short circuits.

Loosen the speaker terminals.

Insert the bare wire of the speaker cable into the gap

on the side of the terminal.

Tighten the terminal.

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

SPIMP.-8MIN

FRONT

Connecting the banana plug (Except U.K., Europe,

Asia and Korea models)

Tighten the knob, and then insert the banana plug into the end of

the terminal.

FRONT

Banana plug

1 : Refer to the “Extended functionality that can be configured as needed

(Advanced Setup menu)” (☞

p. 66) for details on the Advanced Setup menu.

En 13

CONNECTIONS

Connecting speakers

■

Connecting the subwoofer

Connect the subwoofer input jack to the

SUBWOOFER jack on this unit with an audio pin

cable.

Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than

half).

Crossover frequency (if available): Set to maximum.

■

Bi-amp connection for front speakers

This unit can connect speakers that support bi-amp connections.

When connecting speakers, connect the FRONT jacks and the

SURROUND BACK/BI-AMP jacks as in the diagram below.

To activate a bi-amp connection, connect the power cable, and then

set the following.

Check that the unit power is in standby mode.

Press A while pressing and holding STRAIGHT on

the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display. After approximately a few seconds, the

top menu items are displayed. J1

Press PROGRAM h repeatedly to switch to the

following display.

Press STRAIGHT to change the settings to “ON.”

Switch this unit to standby mode, and then switch it

on again.

The bi-amp connection becomes effective and the unit is powered on.

To deactive a bi-amp connection, follow the same procedure and

select “OFF” in step 4.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

NOTES

• Before making bi-amplification connections, remove any

brackets or cables that connect a woofer with a tweeter. Refer to

the instruction manuals of speakers for details. When not making

bi-amplification connections, make sure that the brackets or

cables are connected before connecting the speaker cables.

• If connecting a bi-amp, then surround back speakers cannot be

used.

FRONT

SURROUND BACK/

BI-AMP

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

BI-AMP-OFF

1 : Refer to the “Extended functionality that can be configured as needed

(Advanced Setup menu)” (☞

p. 66) for details on the Advanced Setup menu.

En 14

CONNECTIONS

Cable plugs and jacks

This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for

components that you are going to connect.

■

Audio/Video jacks

HDMI jacks

Digital video and digital sound are transmitted through a single jack.

Only use an HDMI cable.

■

Analog video jacks

■

Audio jacks

Connecting external components

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

COMPONENT VIDEO jacks

The signal is separated into three components:

luminance (Y), chrominance blue (P

B), and chrominance red (PR).

Use component video pin cables with three plugs.

HDMI cable

Component video pin cable

S VIDEO jack (U.K. and Europe models

only)

To transmit S-video signals that include luminance

(Y) and chrominance (C) components.

Use S-video cable.

VIDEO jack

This jack transmits conventional analog video

signals.

Use video pin cables.

OPTICAL jacks

These jacks transmit optical digital audio signals.

Use fiber-optic cables for optical digital audio

signals.

COAXIAL jacks

These jacks transmit coaxial digital audio signals.

Use pin cables for digital audio signals.

AUDIO jacks

These jacks transmit conventional analog audio

signals.

Use stereo pin cables, connecting the red plug to

the red R jack, and the white plug to the white L

jack.

PORTABLE jack

This jack transmits conventional analog audio

signals.

Use a stereo mini-plug cable when connecting.

S-video cable

Video pin cable

Digital audio fiber-optic cable

Digital audio pin cable

Stereo pin cable

Stereo mini-plug cable

En 15

CONNECTIONS

Connecting external components

Connecting a TV monitor

This unit is equipped with the following three types of output jack for connection to a TV.

HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input

signal format supported by your TV.

When connecting to an HDMI compatible TV

Video signal such as component video and video received by this unit is converted to HDMI and output

to the TV. Just select HDMI input on the TV to view video from any external source connected to this

unit. J1

When connecting to a non-HDMI compatible TV

Connect to the TV using the same type of connection that you used to connect to the external

component, and change the inputs on your TV to match that of the external component you are using

for playback.

HDMI

OUT

ARC

MONITOR OUT

COMPONENT

VIDEO

NEN

VIDE

(BD

DVD)

HDMI

HDM

IDE

DOCK

NTENN

HDMI OUT jack

COMPONENT VIDEO jacks

(MONITOR OUT)

VIDEO jack

(MONITOR OUT)

HDMI

COMPONENT

VIDEO

HDMI

VIDEO

S VIDEO

Input Output

HDMI input

Through

Converted

COMPONENT

VIDEO

HDMI

VIDEO

COMPONENT

VIDEO

HDMI

VIDEO

S VIDEO

Input Output

Video input

Through

Component

video input

1 : You can change the resolution and aspect ratio used when converting to HDMI to suit your requirements (☞p. 55).

En 16

CONNECTIONS

Connecting external components

■

Connecting an HDMI video monitor

Connect the HDMI cable to the HDMI OUT jack.

■

Connecting a component video monitor

Connect the component video cable to the COMPONENT VIDEO (MONITOR OUT) jacks.

■

Connecting a video monitor

Connect the video pin cable to the VIDEO (MONITOR OUT) jack.

• Use a 19-pin HDMI cable with the HDMI logo.

• We recommend using a cable less than 5.0 m long to prevent signal quality degradation.

HDMI

OUT

ARC

NENT

VIDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

AXIAL

AXIA

)

(

DVD

)

HDMI 2

HDMI 1

IDE

ANTENNA

NIT

OMPONENT

IDE

HDMI

HDMI input

COMPONENT

VIDEO

NENT

VIDE

PTI

(

)

AUDI O 1

AUDI O 2

AXIAL

AXIA

(

)

(

BD/DVD

)

HDMI 2

HDMI 1

HDMI

VIDE

DOCK

ANTENNA

IDE

COMPONENT

VIDEO

Component video input

VIDEO

NENT

VIDE

PTI

(

TV)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

AXIAL

AXIA

(

)

(

DVD

)

HDMI 2

HDMI 1

HDMI

VIDE

DOCK

ANTENNA

NIT

NENT

VIDE

VIDEO

Video input

1 : When connecting to a TV that supports HDMI input, the video signal for the COMPONENT VIDEO/VIDEO jacks is

converted and output from HDMI OUT jack. When connecting to a TV via the HDMI jack, you do not need to use these

jacks.

En 17

CONNECTIONS

Connecting external components

■ Listening to TV audio

To transmit sound from the TV to this unit, connect as followings according to the TV:

When using a TV that supports the Audio Return Channel function and HDMI

Control function

When your TV supports both HDMI Control (Ex. Panasonic VIERA Link) and Audio Return

Channel functions, audio/video output from the unit to the TV and audio output from the TV to the

unit are possible using a single HDMI cable.

The input source is switched automatically to match operations carried out on the TV, and that

makes TV sound control easier to use.

For the connections and settings, refer to “Single HDMI cable input to TV audio with Audio Return

Channel function” (☞

p. 70).

When using a TV that supports the HDMI Control functions

When using a TV that supports HDMI Control functions (Ex. Panasonic VIERA Link), if HDMI

Control functions are enabled on the unit, then input source can be switched automatically to match

operations carried out on the TV.

For the connections and settings, refer to “Switching the input source on this unit automatically

when listening to TV audio” (☞

p. 69).

When using other TVs

To transmit sound from the TV to this unit, connect its AV1-6 or AUDIO1-2 jacks to the TV’s audio

output jacks.

Depending on the connection on TV, connect the TV’s audio output to the AV1-6 or AUDIO1-2.

Select the input source connected via TV’s audio output jack to enjoy the TV sound.

If the TV supports optical digital audio output, we recommend that you connect the TV audio output

to the receiver’s AV4 jack.

Connecting to AV4 allows you to switch the input source to AV4 with just a single key operation

using the SCENE function (☞

p. 30).

You can control your TV using the receiver’s remote control by entering the TV’s remote control

code (☞p. 63).

TV audio output Connection

Optical digital audio output Connect to the OPTICAL jack of the AV1 or AV4 with a digital audio pin

cable.

Coaxial digital audio output Connect to the COAXIAL jack of the AV2 or AV3 with a fiber-optic cable.

Analog stereo output Connect to one of the AV5, AV6, AUDIO1, AUDIO2, or V-AUX with a

stereo pin cable.

OPTICAL OPTICAL

(TV)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

UDIO

COAXIAL COAXIAL

(CD)

OMPONENT

IDE

(

DVD

)

HDMI

IDE

ARC

ANTENNA

NIT

COMPONENT

IDE

OPTICAL

Audio output

(Optical)

Available input jacks

En 18

CONNECTIONS

Connecting external components

Connecting BD/DVD players and other devices

This unit has the following input jacks. Connect them to the appropriate output jacks on

the playback devices such as BD/DVD players.

■

Connecting BD/DVD players and other devices with

HDMI

Connect the device with an HDMI cable to one of the HDMI1-4 jacks.

Select the HDMI input (HDMI1-4) that the playback device is connected to for

playback.

OPTION

HDMI

1234

ENTER

EIVER

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLA

SOURCE

DOCK

[

]

[

]

dInput selector

jCursor C / D / E

jENTER

qOPTION

Input jack Video input Audio input

HDMI1 HDMI HDMI

HDMI2 HDMI HDMI

HDMI3 HDMI HDMI

HDMI4 HDMI HDMI

AV1 Component video Optical digital

AV2 Component video Coaxial digital

AV3 Video Coaxial digital

AV4 Video Optical digital

AV5 Video Analog (Stereo)

AV6 Video Analog (Stereo)

AUDIO1 — Analog (Stereo)

AUDIO2 — Analog (Stereo)

VIDEO AUX Video Analog (Stereo)

NENT

VIDE

OPTICA

OPTICAL

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDIO 2

OAXIA

COAXIA

)

FRON

HDMI

OUT

UDIO

IDE

DOC

ANTENNA

NIT

NEN

VIDE

HDMI

HDMI output

BD/DVD player

■ Receiving video signals from the HDMI jack and audio signals

from a jack other than HDMI

This unit can use the AV1-6 or AUDIO1-2 input jacks to receive audio signals from

other input jacks.

For example, if an playback device cannot produce audio signals from an HDMI

jack, use the following method to change the audio input.

Use the dInput selector to select the desired HDMI input source.

Press qOPTION to display the Option menu. J1

Press jCursor C repeatedly to select “Audio In,” and then press

jENTER.

Press jCursor D / E to select the audio input source.

When the video input source from this unit is selected on TV, the menu items are

displayed on the TV screen (On-Screen Display).

Once you have completed the setup, press qOPTION to close the

Option menu.

1 : When operating the Option menu, information is displayed both on the TV screen (On-Screen Display)

and on the front panel. Refer to the “Configuring the settings specific for each input source (Option

menu)” (☞

p. 45) for details on the Option menu.

OPTICAL

(BD/DVD)

HDMI 1

OMPONEN

IDE

OPTICAL

(TV)

AUDIO 1

AUDIO 2

OAXIA

(

CD)

HDMI

DMI

OUT

IDE

ANTENNA

NIT

OUT

COMPONENT

VIDE

HDMI

OPTICAL

HDMI

HDMI/Audio (Optical)

output

BD/DVD player

HDMI1OPTION

AudioIn

;;;;;;

AV1

If you have selected AV1 input audio (optical digital)

En 19

CONNECTIONS

Connecting external components

■

Connecting BD/DVD players and other devices with component

cables

Connect the device with a component video cable to one of the AV1-2 input jacks.

Using optical digital audio output sources

Select the AV1 input that the playback device is connected to for playback.

Using coaxial digital audio output sources

Select the AV2 input that the playback device is connected to for playback.

COMPONENT

VIDEO

OPTICAL

PTICA

(

)

AV 2

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

COAXIAL

OAXIA

)

(

DVD

)

HDMI 2

HDMI 1

HDM

IDE

ANTENNA

NIT

OMPONENT

IDE

COMPONENT

OPTICAL

Component video / Audio (Optical)

output

BD/DVD player

AV 2

COAXIAL

NENT

VIDEO

PTICA

OPTICAL

(

)

AV 1

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

OAXIAL

)

(

DVD)

HDMI 2

HDMI 1

HDM

OUT

IDE

ANTENNA

NIT

OMPONENT

VIDE

IDE

COMPONENT

VIDEO

COAXIAL

Component video / Audio (Coaxial)

output

BD/DVD player

■ Component connections to analog audio output devices

You can use the video input from the AV1-2 jacks in combination with the audio input from other

AV inputs or AUDIO1-2.

When connecting these devices, select the AV input jacks or the AUDIO1-2 jacks as the audio input

for AV1 or AV2. Refer to “Receiving video signals from the HDMI jack and audio signals from a

jack other than HDMI” (☞

p. 18) for detailed setup guidance.

Select the AV input source (AV1-2) that is connected by component video cable to the playback

device for playback. When the video input source from this unit is selected on TV, the menu items

are displayed on the TV display (On-Screen Display).

COMPONENT

VIDEO

AUDIO 1

PTI

(

)

AUDIO 2

AXIAL

AXIA

)

(

DVD)

HDMI 2HDMI 1

HDMI

VIDE

ANTENNA

NIT

NEN

IDE

AUDIO

COMPONENT

VIDEO

Component video / Audio

output

Game console

AV1OPTION

AudioIn

;;;

AUDIO1

If you have selected AUDIO1 input audio (Analog stereo)

En 20

CONNECTIONS

Connecting external components

■

Connecting BD/DVD players and other devices with S-video

cables (U.K. and Europe models only)

Connect the S-video cable to the AV5 input jack. Connect the output audio to the AV5 analog audio

jack.

Select the AV5 input source for connected video output that the playback device is connected to for

playback. Video from the S VIDEO jack is output through the HDMI OUT jack only.

■

Connecting BD/DVD players and other devices with video cables

Connect the playback device with a video pin cable to one of the AV3-6 input jacks.

Using optical digital audio output sources

Select the AV4 input that the playback device is connected to for playback.

Using coaxial digital audio output sources

Select the AV3 input that the playback device is connected to for playback.

Using analog stereo audio output sources

Select the AV5 or AV6 input that the playback device is connected to for playback.

AV 5

NEN

IDEO

PTICA

OPTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 6

AUDI O 1

AUDI O 2

OAXIA

COAXIAL

)

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

AUDIO

VIDEO

S-video / Audio output

BD/DVD player

OPTICAL

NEN

IDEO

PTICA

AV 1

AV 2

AV 3

AV 5

AV 6

AUDI O 1

AUDI O 2

OAXIA

COAXIAL

)

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

VIDEO

OPTICAL

Video / Audio (Optical)

output

BD/DVD player

COAXIAL

(CD)

VIDEO

NEN

IDEO

PTICA

OPTICA

(

)

AV 1

AV 2

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

OAXIA

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

DOCK

ANTENNA

NIT

COMPONENT

VIDE

VIDEO

COAXIAL

Video / Audio (Coaxial)

output

BD/DVD player

NEN

IDEO

PTICA

OPTICA

(

)

AV 1

AV 2

AV 3

AV 4

AUDI O 1

AUDI O 2

OAXIA

COAXIAL

)

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

AUDIO

VIDEO

Video / Audio

output

BD/DVD player

En 21

CONNECTIONS

Connecting external components

■

Connecting CD players and other audio devices

Using analog stereo output sources

Select the audio input (AUDIO1-2) that the playback device is connected to for playback.

Using optical digital output sources

Select the AV input (AV1 or AV4) that the playback device is connected to for playback.

Using coaxial digital output sources

Select the AV input (AV2 or AV3) that the playback device is connected to for playback.

NEN

IDEO

PTICA

OPTICA

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

OAXIA

COAXIAL

)

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

AUDIO

Audio output

CD player

OPTICAL OPTICAL

NEN

IDEO

AV 2

AV 3

AV 5

AV 6

AUDI O 1

AUDI O 2

OAXIA

COAXIAL

)

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

OPTICAL

CD player

Audio (Optical) output

We recommend connecting audio devices with an coaxial digital output to the AV3 coaxial digital

jack on this unit. This connection allows you to switch to the AV input 3 just by pressing the “CD”

SCENE key (☞

p. 30).

COAXIAL COAXIAL

(CD)

NEN

IDEO

PTICA

OPTICA

(

)

AV 1

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

(BD

DVD)

HDMI 2

HDMI 1

DMI

OUT

VIDE

DOCK

ANTENNA

NIT

COMPONENT

VIDE

COAXIAL

Audio (Coaxial) output

CD player

En 22

CONNECTIONS

Connecting external components

Connecting video cameras and portable audio players

Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, video game units,

or portable audio devices to the receiver.

Select the V-AUX input to use these connected devices.

Transmitting input A/V to external components

This receiver can transmit selected incoming analog audio/video signals to external components

through the AV OUT and AUDIO OUT jacks. You can record these input audio and video signals to

VCRs or similar devices, or send them to other TVs or external components.

Using the AV OUT jacks

Connect this jacks to the external component’s video input jack and analog audio input jacks.

Using the AUDIO OUT jacks

Connect this jack to the external component’s analog audio input jacks.

• Be sure to turn down the volume when connecting this unit and the other devices.

• When external components are connected to both the PORTABLE jack and the AUDIO jacks, the sound

output from the PORTABLE jack is transmitted.

VIDEO

AU X

STRAIGHT

RADIO

VIDEO

AUDIO

PORTABLE

AU D I O

VIDEO

AUDIO OUT

Audio output

Portable audio player Video cameras

Audio output

Video output

HDMI audio/video signals, component video signals, S-video signals and digital audio signals

cannot be transmitted from these jacks.

OUT

AUDI O

OUT

NENT

VIDE

PTI

(

)

AV 1

AV 2

AV 3

AV 4

AV 5

AV 6

AUDI O 1

AUDI O 2

AXIA

AXIAL

(

)

(

DVD

)

HDMI

OUT

IDE

ANTENNA

NIT

OUT

NENT

VIDE

IDE

AUDIO

VIDEO

AUDIO

Audio recorder

Audio input

VCR

Video / Audio

input

En 23

CONNECTIONS

An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas

properly to their respective jacks.

Assembling the AM loop antenna

Connecting the FM/AM antennas

ANTENNA

75ǡ

GND

ENT

(BD

DVD)

HDMI 2

HDMI 1

HDMI

OUT

VIDE

OCK

MONITOR OUT

NENT

VIDEO

VIDE

Indoor FM antenna

AM loop antenna

Position the AM antenna away from the receiver.

The wires of the AM antenna have no polarity.

You can connect either wire to the AM jack or the

GND jack.

Connecting the AM loop antenna

ReleaseInsertPress and hold

■ Improving FM reception

We recommend using an outdoor antenna. For more information, consult the nearest authorized

dealer.

■ Improving AM reception

Connect this unit to an outdoor antenna with a 5-10 m vinyl-coated wire. Make sure the AM loop

antenna is still connected.

Connecting the GND jack can reduce noise. Connect the jack to a store-bought ground bar or copper

plate with a vinyl-covered wire and bury this new attachment in moist ground.

The GND jack is not to be connected to the ground socket of an electrical outlet.

En 24

CONNECTIONS

This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using

YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room

in which this unit is placed). J1

Check the following before using YPAO.

This unit

• The headphones are removed.

• This unit is connected to the TV correctly.

• The power is turned on.

• The video input to which the video output from this unit has been

selected.

Subwoofer

• The power is turned on.

• Volume is set to approximately half, and the cross-over frequency (if

present) is set to maximum.

Place the supplied YPAO microphone at ear height in

your listening position.

Face the head of the YPAO microphone upwards.

Switch this unit on.

Connect the YPAO microphone to the YPAO MIC jack

on the front panel.

“MIC ON. View OSD MENU” appears on the front panel display,

and the following appears on the TV screen. J2

Set up the speaker parameters automatically (YPAO)

When you use YPAO, a test tone will be output from the

speakers for approximately 3 minutes and acoustic measuring

will be performed. When using YPAO, be careful of the

following.

• The test tone is output at high volume. Please refrain from using

this function at night when it may be a nuisance to others nearby.

• Please take care that the test tone does not frighten any small

children.

You can view the operations of YPAO on the front panel display

or on the OSD (On-Screen Display) displayed on your TV while

you use it. This explanation uses references to the OSD display

on your TV.

When positioning the microphone, we recommend that you use

equipment that allows you to adjust the height (such as a tripod)

as a microphone stand. When using a tripod, use the tripod

screws to fix the microphone in place.

VOLUME

MIN MAX

CROSSOVER/

HIGH CUT

MIN MAX

Subwoofer examples

YPAO microphone

INFO

YPAO MIC

AutoSetup

EQ Type;;;;Natural

[SETUP]:Start

.Start



[OPTION]:EQ Select

Continues to the

1 : When you have changed the number of speakers or the locations in which they

are installed, first use YPAO to adjust the speaker balance.

2 : To cancel measurement, disconnect the YPAO microphone.

En 25

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

If necessary, press qOPTION repeatedly

and select the measuring acoustic

characteristics in the “EQ Type” setting. J1

During YPAO, the results of measuring the acoustic

characteristics are used to set the equalizer (parametric

equalizer) to give a unified sound field. After setting,

you can select the characteristics of the sound field in

“EQ Type,” as necessary.

Press iSETUP to start measurement.

The following display appears when measurement

finishes without any problems.

Displays the number of speakers connected to this unit in

the following order:

Total of Front and Center/Total of Surround and

Surround Back/Subwoofer

DIST

Displays the speaker distance from the listening position

in the following order:

Closest speaker distance/Farthest speaker distance

LVL

Displays the speaker output levels in the following order:

Lowest speaker output level/Highest speaker output level

Press jENTER to apply the results of

measurement.

Remove the YPAO microphone.

YPAO finishes automatically when the YPAO

microphone is removed.

OPTION

SETUP

ENTER

EIVER

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLA

SOURCE

DOCK

[

]

[

]

iSETUP

jCursor B / D / E

jENTER

qOPTION

Natural

(Default)

Adjusts all speaker sound to give natural

acoustics.

Flat Sets uniform characteristics for each

speaker. Choose this when all of the

speakers used are of the same quality. If

the treble range sounds harsh after

adjustment, select “Natural” and measure

again.

Front Sets the characteristics of each speaker to

match the front speakers. Choose this

when the front speakers are of

significantly higher quality than the other

speakers.

This completes preparations. To achieve more

accurate results, be careful of the following when

measuring.

• Measuring will take approximately 3 minutes. Keep

the room as quiet as possible during measurement.

• Wait in the corner of the listening room during

measurement or leave it entirely, to avoid becoming an

obstruction between the speakers and the YPAO

microphone.

AutoSetup

.

;PreCheck



;Initializing

[]:Exit



;MainCheck



CheckCH=FrontL



;Calculation



;Level

;;;;;;;;;;;;;;;02%

Display during measurement

AutoSetup

RESULT

[ENTER]:Finish

SP:3/4/0.1



.>SetCancel

DIST:2.50/3.00m

LVL:-1.0/+1.5dB

[p]/[[]:Select

NOTE

When a problem occurs, an error message or report

appears either during or after measurement. Use the

following page as a reference to solve the problem,

and carry out YPAO again.

If you want to carry out measurement again, press

jCursor E to select “Cancel” and press

jENTER. After this operation, use the same

procedure to carry out YPAO again.

The YPAO microphone is sensitive to heat. When you

have finished measuring, store the microphone out of

direct sunlight, and away from locations that may

experience high temperatures, such as on top of AV

equipment.

AutoSetup

AUTOSETUPFinished

[SETUP]:Exit



PRESS[ENTER]

Disconnect Microphone

1 : You can also select “EQ Type” using the cursor keys. Press

jCursor B to select “EQ Type,” and you can change the setting

using

jCursor D / E.

En 26

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

When an error message appears

during measurement

Check the content of the message from the “Error

message” (☞

p. 27) to resolve the problem, and carry out

the measurement process again.

Check the error code that appears in the display, and

carry out YPAO again by performing the following steps.

When “E-1,” “E-2,” “E-4” or “E-6” is

displayed:

Press jCursor C once, and then press

jCursor E to select “Exit.”

Press jENTER to finish YPAO, and switch

the unit to standby mode.

Check that the speakers are properly

connected.

Turn on the unit, and then carry out YPAO

again.

When “E-5,” “E-7,” “E-8” or “E-9” is

displayed:

Check that the environment is suitable for

accurate measurement.

Press jCursor C once to select “Retry.”

Press jENTER to carry out YPAO again.

When “E-10” is displayed:

Press jCursor C once to select “Exit.”

Press jENTER to finish YPAO.

Switch the unit to standby mode.

Turn on the unit again, and then carry out

YPAO.

■

When a warning message appears

after measurement

Check the content of the message from the “Warning

message” (☞

p. 28) to resolve the problem. You can

confirm the speaker that has the problem on the TV screen.

Confirm the warning message:

Press jENTER once.

When multiple warning messages exist:

Use jCursor D / E to display other warning messages.

When applying the results of measurement:

If an warning message is displayed, press jENTER to

switch display, use jCursor D / E to select “Set,” and

press jENTER.

When cancelling YPAO:

If an warning message is displayed, press jENTER to

switch display, use jCursor D / E to select “Cancel,”

and press jENTER.

ENTER

EIVER

PTI

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLA

SOURCE

DOCK

[

]

[

]

jCursor C / D / E

jENTER

ERROR

Don'toperate

.E-9:USER CANCEL

[ENTER]:Return

anyfunction



>RetryExit

[]/[]:Up/Down

[

NOTE

Although you can apply the results of measurement

when a warning message appears, doing so will not

provide optimal sound. We recommend you resolve

the problem and then carry out YPAO again.

AutoSetup

RESULT

.WARNING(1)

[ENTER]:Finish

SP:3/4/0.1



>SetCancel

DIST:2.50/3.00m

LVL:-1.0/+1.5dB

[p]/[[]:Select

Number of messages

WARNING

------

W-3:LEVELERROR

[ENTER]:Return

---



SWFR:TOO LOUD

---SR

SBLSBR

[p]/[[]:Select

Speaker that has a problem

En 27

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■

Message list

■ When a warning message appears before

measurement

■ Error message

NOTE

If the following messages appear, resolve the problems that have

occurred and carry out the measurement process again.

Connect MIC! The YPAO microphone is

not connected.

Connect the YPAO

microphone to the YPAO

MIC jack on the front

panel.

Unplug HP! The headphones are

connected.

Remove the headphones.

Memory Guard! The settings of this unit

are protected.

Set “Memory Guard” in

the Setup menu to “Off”

(☞p. 59).

E-1:

NO FRONT SP

The unit was not able to

find the front channel.

Check that the left and

right front speakers are

connected correctly.

E-2:

NO SUR. SP

The unit was only able to

find one of side of the

surround channels.

Check that the left and

right surround speakers

are connected correctly.

E-4:

SBR.SBL

Only one surround back

speaker is connected and

only the right side

surround back channel

sound is detected.

When only one surround

back speaker is

connected, connect to the

left side (SINGLE)

terminal.

E-5:

NOISY

The noise is too loud,

preventing accurate

measurements from

being taken.

Measure again in quiet

surroundings. Turn off any

devices in the room that

may be emitting noise, or

place them further away

from the YPAO

microphone.

When this message is

displayed, selecting

“Proceed” will allow you

to continue measuring.

However, we recommend

resolving the problem and

measuring again, as

continuing measurement

without doing so will not

give accurate results.

E-6:

CHECK SUR.

Even though surround

left and right speakers are

not connected, only the

surround back speakers

are connected.

When using surround back

speakers, connection of the

surround left/right

speakers is necessary.

E-7:

NO MIC

The YPAO microphone

has been removed.

While measuring, take

care not to touch the

YPAO microphone.

E-8:

NO SIGNAL

The YPAO microphone

could not distinguish a

test tone.

Check that the YPAO

microphone has been

installed correctly.

Check that each speaker

has been connected and

installed correctly.

The YPAO microphone

or the YPAO MIC jack

may be broken. Inquire at

the retailer where you

purchased this unit, or the

nearest Yamaha service

center.

E-9:

USER CANCEL

You have carried out an

operation that has

cancelled the measuring

process.

Carry out the measuring

process again. Do not

operate this unit by, for

example, adjusting the

volume.

E-10:

INTERNAL ERROR

An internal error has

occurred.

Carry out the measuring

process again. Contact a

Yamaha service center if

“E-10” appears again.

En 28

CONNECTIONS

Set up the speaker parameters automatically (YPAO)

■ Warning message

W-1:

OUT OF PHASE

The speakers displayed

are connected with the

opposite polarity.

Depending on the type of

speakers you are using

and the environment in

which you have them

installed, this message

may occur even if the

speakers are connected

correctly.

Depending on the type of

speakers, “W-1” may

display even if the

speakers are connected

correctly.

Check that the speaker

polarity + (positive), and

- (negative) are correct. If

these are connected

correctly, you can use the

speakers normally even

this message appears.

W-2:

OVER 24m

(80ft)

The speakers displayed

are separated from the

listening position by

more than 24 m, and

cannot be adjusted

correctly.

Install the speakers with

24 m of the listening

point.

W-3:

LEVEL ERROR

The difference each

channel is too loud or too

low, and cannot be

adjusted correctly.

Check that all speakers

are installed in the same

surroundings.

Check that the speaker

polarity + (positive), and

- (negative) are correct.

We recommend the same

speakers or speakers with

as similar specifications

as possible.

Adjust the volume of the

subwoofer.

If “W-2” or “W-3” appears, you can apply measurement results,

but they will not give optimal results. We recommend that you

resolve the problem and carry out the measurement process

again.

En 29

PLAYBACK

Turn on external components (TV, DVD

player, etc.) connected to this unit.

Turn on this unit and select the input source

using dInput selector.

The name of the selected input source is displayed for

a few seconds. J1

Play the external component that you have

selected as the source input, or select a

radio station on the tuner.

Refer to the instruction manuals provided with the

external component for details on playback.

For details on the following operations, refer to the

corresponding pages:

• “FM/AM tuning” (☞p. 35)

• “Playing back tunes from your iPod™/iPhone™”

(☞

p. 40)

• “Playing back tunes from Bluetooth™ components”

(☞

p. 43)

Press rVOLUME +/- to adjust the volume.

To mute the output.

Press sMUTE to mute the audio output.

Press sMUTE again to unmute.

Adjusting high/low-frequency sound

(Tone control)

You can adjust the balance of the high-frequency range

(Treble) and low-frequency range (Bass) of sounds

output from the front left and right speakers to obtain

desired tone.

Press TONE CONTROL on the front panel

repeatedly to select “Treble” or “Bass.”

The current setting is displayed on the front panel

display.

Press PROGRAM l / h to adjust the output

level in those frequency ranges.

The display returns to the previous display soon after

you release the key.

Basic playback procedure

dInput selector

rVOLUME +/-

sMUTE

VOLUME

HDMI

AUDIO

1234

1256

V-AUX

TUNER

MUTE

DOCK

EIVER

PTI

ETU

RETURN

NHANCER

R. DE

TRAI

IRE

RAN

MIT

SLEEP

PRESE

UNIN

TERE

ADI

ENTER

V V

P-

PLA

SOURCE

[

]

[

]

The tone control of the speakers or headphones can be

set separately. Set the headphone tone control with the

headphones connected.

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

TONE CONTROL

PROGRAM l / h

YPAO MIC

SL SR

SBL SBR

SL SR

Treble 0.0dB

TONE

VOL.

Adjustable range -10.0 dB to +10.0 dB

Adjustment

increments

2.0 dB

If you set the balance extremely off, sounds may not

match those from other channels well.

1 : You can change the input source name displayed on the front

panel display as necessary (☞

p. 58).

En 30

PLAYBACK

This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key.

Four scenes are available for different uses, such as

playing movies or music. The following input sources

and sound field programs are provided as the initial

factory settings.

Registering input sources/sound

field program

Use dInput selector to select the input

source you want to register.

Use the gSound selection keys to select

the sound field program you want to

Press the hSCENE key until “SET

Complete” appears on the front panel

display.

This unit is also equipped with a Yamaha digital sound field processing (DSP) chip. You can enjoy multi-channel playback for almost any sound source using various

sound field programs stored on the chip, and a range of sound decoders.

Selecting sound field programs and

sound decoders

This unit offers sound field settings (sound field

programs) in many different categories suitable for

movies, music and other uses. Choose a sound field

program that sounds best with the source you are playing

back, rather than relying on the name or explanation of

the program.

Changing input settings with a single key (SCENE function)

dInput selector

gSound selection keys

hSCENE

SCENE

ENHANCER

SUR. DECODE

STRAIGHT DIRECT

HDMI

AUDIO

1234

1256

V-AUX

TUNER

MOVIE MUSIC

STEREO

DVD

RADIO

DOCK

EIVER

PTI

ETU

RETURN

RAN

MIT

SLEEP

PRESE

UNIN

ENTER

V V

OP-U

PLAY

SOURCE

[

]

[

]

SCENE Input Sound field program

BD/DVD HDMI1 Straight

TV AV4 Straight

CD AV3 Straight

RADIO TUNER 7ch Enhancer

When changing “SCENE,” also change the external

component that the remote control operates

(☞p. 63).

SL SR

SET Complete

SCENE1

VOL.

SBL SBR

Release the key when “SET Complete” is displayed

Enjoying sound field programs

• Sound field programs are stored for each input source.

When you change the input source, the sound field

program previously selected for that input source is

applied again.

• When you playback DTS Express sources or audio

signals with sampling frequency of higher than

96 kHz, the straight decoding mode (☞

p. 31) is

automatically selected.

• When you playback DTS-HD sources with CINEMA

DSP, the DTS decoder is automatically selected.

Continues to the

En 31

PLAYBACK

Enjoying sound field programs

Selects sound field program:

MOVIE category: Press gMOVIE repeatedly

MUSIC category: Press gMUSIC repeatedly

Selects stereo reproduction:

Press gSTEREO repeatedly

Selects compressed music enhancer:

Press gSTEREO repeatedly

Selects surround decoder:

Press gSUR. DECODE repeatedly

Switches Straight decoding mode:

Press gSTRAIGHT

Switches Direct mode (☞p. 32):

Press gDIRECT

■

Enjoying unprocessed playback

(Straight decoding mode)

Use straight decoding mode when you want to playback

sound without sound field processing. You can playback

as follows in straight decoding mode.

2-channel sources such as CD

Stereo sound plays through the front left and right

speakers.

Multi-channel playback sources such as BD/

DVD

Plays back audio from a playback source without

applying sound field effects, using an appropriate

decoder to split the signal into multiple channels.

Press gSTRAIGHT to enable the straight

decoding mode.

■

Enjoying stereo playback

Select “2ch Stereo” from the surround field programs

when you want to playback 2-channel stereo sound

(from the front speakers only), regardless of the

playback source.

Selecting “2ch Stereo” will playback as follows for the

playback of CD and BD/DVD sources.

2-channel sources such as CD

Stereo sound plays back through the front speakers.

Multi-channel sources such as BD/DVD

Playback channels other than the front channels in the

playback source are mixed with the front channels and

played back through the front speakers.

Press gSTEREO repeatedly to select “2ch

Stereo.”

Sound selection keys

gMOVIE

gMUSIC

gSTEREO

gSUR. DECODE

gSTRAIGHT

gDIRECT

ENHANCER

SUR. DECODE

STRAIGHT DIRECT

MOVIE MUSIC

STEREO

EIVER

PTI

ETU

RETURN

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

ADI

ENTER

V V

OP-U

PLAY

SOURCE

DOCK

[

]

[

]

• You can use the speaker indicators on the front panel

display to check what speakers are currently

outputting sound (☞

p. 7).

• You can adjust sound field elements (sound field

parameters) for each of the programs.

SL SR

Sci-Fi

MOVIE

VOL.

SBL SBR

Sound field program categories

Program

To disable straight decoding mode, press

gSTRAIGHT again.

SL SR

Straight

VOL.

SBL SBR

SL SR

Sci-Fi

MOVIE

VOL.

SBL SBR

Previously selected program

To disable stereo playback, press any of the gSound

selection keys to select a sound field program other

than “2ch Stereo.”

2ch Stereo

STEREO

VOL.

SL SR

Hall in Vienna

MUSIC

VOL.

SBL SBR

En 32

PLAYBACK

Enjoying sound field programs

■

Enjoying sound field programs

without surround sound speakers

This unit allows you to use virtual surround speakers to

enjoy sound field surround effects, even without any

surround speakers (Virtual CINEMA DSP mode). You

can even enjoy surround sound presence with just a

minimal configuration of the front speakers only.

This unit will switch to Virtual CINEMA DSP mode

automatically when surround speakers are

unavailable. J1

■

Enjoying sound field programs

with headphones

Even when headphones are connected, you can enjoy the

reproduction sound field presence with ease (SILENT

CINEMA mode). J2

■

Enjoying Hi-Fi Sound Quality

(Direct mode)

Use Direct mode to enjoy the pure high fidelity sound of

the selected source. When direct mode is enabled, this

unit plays back the selected source with the least

circuitry. J3

Press gDIRECT to turn direct mode on. J4

gDIRECT

DIRECT

EIVER

PTI

ETU

RETURN

NHANCER

R. DE

TRAI

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

ENTER

V V

OP-U

PLAY

SOURCE

DOCK

[

]

[

]

To disable direct mode, press gDIRECT again.

VOL.

Direct

1 : However, Virtual CINEMA DSP mode is not available in the

following conditions:

• When headphones are connected to this unit.

• When a “7ch Stereo” sound field program is selected.

• When direct mode or straight decoding mode is selected.

2 : However, SILENT CINEMA mode is not available in the

following conditions:

• When a “7ch Stereo” sound field program is selected.

• When direct mode or straight decoding mode is selected.

3 : The following features are disabled in direct mode.

• sound field program, tone control

• display and operation of the Option menu and Setup menu

4 : While direct mode is on, the front panel display screen becomes

dim in order to reduce noise. When turning Direct mode off, the

brightness of the screen returns to the previous setting.

En 33

PLAYBACK

Enjoying sound field programs

Sound field programs

■

Category: MOVIE

Sound field programs optimized for viewing video sources such as movies, TV programs, and games.

■

Category: MUSIC

This sound field is suitable when listening to music sources such as CDs.

in the table indicates the sound field program for CINEMA DSP.

Standard This program creates a sound field emphasizing the surround feeling without disturbing the

original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has

been designed with the concept of an ideal movie theater, in which the audience is

surrounded by beautiful reverberations from the left, right and rear.

Spectacle This program represents the spectacular feeling of large-scale movie productions. It

reproduces a broad theater sound field that matches cinemascope and wider-screen movies

with an excellent dynamic range providing everything from very small sound effects to

large, impressive sounds.

Sci-Fi This program clearly reproduces the finely elaborated sound design of the latest science

fiction and special effects-featuring movies. You can enjoy a variety of cinematographically

created virtual spaces reproduced with clear separation between dialog, sound effects and

background music.

Adventure This program is ideal for precisely reproducing the sound design of action and adventure

movies. The sound field restrains reverberations but puts emphasis on reproducing a

powerful space expanded widely to the left and right. The reproduced depth is also

restrained relatively to ensure the separation between audio channels and the clarity of the

sound.

Drama This sound field features stable reverberations that match a wide range of movie genres from

serious dramas to musicals and comedies. The reverberations are modest but offer an

optimum 3D feeling, reproducing effects tones and background music softly but cubically

around clear words and center positioning in a way that does not fatigue the listener even

after long hours of viewing.

Mono Movie This program is provided for reproducing monaural video sources such as a classic movie in

an atmosphere of a good old movie theater. The program produces the optimum expansion

and reverberation to the original audio to create a comfortable space with a certain sound

depth.

Sports This program allows the listeners to enjoy stereo sport broadcasts and studio variety

programs with enriched live feeling. In sports broadcasts, the voices of the commentator and

sportscaster are positioned clearly at the center while the atmosphere of the stadium expands

in an optimal space to offer the listeners a feeling of presence in the stadium.

Action Game This sound field is suitable for action games such as car racing and FPS games. It uses

reflection data that limits the effects range per channel in order to offer a powerful playing

environment that makes the listener feel as if they are right there by enhancing various

effects tones while maintaining a clear sense of directions.

Roleplaying Game This sound field is suitable for role-playing and adventure games. It combines the sound

field effects for movies and the sound field designs for “Action Game” to represent the depth

and 3D feeling of the field during play, while offering movie-like surround effects in the

movie scenes in the game.

Hall in Munich This sound field simulates a concert hall with approximately 2500 seats in Munich, using

stylish wood for the interior finishing as normal standards for European concert halls. Fine,

beautiful reverberations spread richly, creating a calming atmosphere. The listener’s virtual

seat is at the center left of the arena.

Hall in Vienna This is an approximately 1700-seat, middle-sized concert hall with a shoebox shape that is

traditional in Vienna. Pillars and ornate carvings create extremely complex reflections from

all around the audience, producing a very full, rich sound.

Chamber This program creates a relatively wide space with a high ceiling like an audience hall in a

palace. It offers pleasant reverberations that are suitable for courtly music and chamber

music.

Cellar Club This program simulates a live house with a low ceiling and homey atmosphere. A realistic,

live sound field features powerful sound as if the listener is in a row in front of a small stage.

The Roxy Theatre This is the sound field of a rock music live house in Los Angeles, with approximately 460

seats. The listener’s virtual seat is at the center left of the hall.

The Bottom Line This is the sound field at stage front in The Bottom Line, a famous New York jazz club once.

The floor can seat 300 people to the left and right in a sound field offering real and vibrant

sound.

Music Video This sound field offers an image of a concert hall for live performance of pop, rock and jazz

music. The listener can indulge oneself in a hot live space thanks to the presence sound field

that emphasizes the vividness of vocals and solo play and the beat of rhythm instruments,

and to the surround sound field that reproduces the space of a big live hall.

En 34

PLAYBACK

Enjoying sound field programs

■

Category: STEREO

Suitable for listening to stereo sources.

■

Category: ENHNCR (Compressed music enhancer)

Suitable for listening to compressed audio, such as MP3.

■

Category: SUR.DEC (Surround decode mode)

Select this program to playback sources with selected decoders. You can playback 2-channel sound

sources in up to 7-channels using a surround decoder.

2ch Stereo Use this program to mix down multi-channel sources to 2-channels. When multi-channel

signals are input, they are down mixed to 2-channels and output from the front left and right

speakers.

7ch Stereo Use this program to output sound from all speakers. When you playback multi-channel

sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all

speakers. This program creates a larger sound field and is ideal for background music at

parties, etc.

Straight Enhancer Use this program to restore the original depth and dynamics of 2-channel or multi-channel

to compression audio.

7ch Enhancer Use this program to playback compression artifacts in 7-channel stereo.

q Pro Logic Reproduces sound using the Dolby Pro Logic decoder. This is suitable for all kinds of sound

sources.

q PLIIx Movie /

q PLII Movie

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for movies. J1

q PLIIx Music /

q PLII Music

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for music. J1

q PLIIx Game /

q PLII Game

Reproduces sound using the Dolby Pro Logic IIx (or Dolby Pro Logic II) decoder. This is

suitable for games. J1

Neo:6 Cinema Reproduces sound using the DTS Neo:6 decoder. This is suitable for movies.

Neo:6 Music Reproduces sound using the DTS Neo:6 decoder. This is suitable for music.

1 : You cannot select the Dolby Pro Logic IIx decoder in the following conditions:

• When the “Sur. B” setting in “Speaker Setup” of the Setup menu is set to “None.”

• When headphones are connected.

En 35

PLAYBACK

The FM/AM tuner of this unit provides the following

two modes for tuning.

Normal tuning

You can tune in to a desired FM/AM station by searching

or specifying its frequency.

Preset tuning (☞p. 36)

You can preset the frequencies of FM/AM stations by

registering them to specific numbers, and later just select

those numbers to tune in.

Selecting a frequency for reception

(Normal tuning)

Press dTUNER to switch to the tuner input.

Press eFM or eAM to select a band to

receive.

FM/AM tuning

dTUNER

eFM

eAM

TUNER

FM AM

EIVER

PTI

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

ENTER

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

When using the FM/AM tuner, adjust the direction of

the FM/AM antenna connected to this unit to get the

best reception.

(Asia and General models only)

The factory pre-set FM/AM tuner frequency steps are

9 kHz for AM and 50 kHz for FM.

Carry out the following settings and select the

frequency steps suitable for your listening

environment.

Switch this unit to the standby mode.

Press A while pressing and holding

STRAIGHT on the front panel.

Release the keys when “ADVANCED SETUP” is

displayed on the front panel display.

After approximately a few seconds, the top menu

items are displayed. J1

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

Press PROGRAM h repeatedly to display

“TU.”

Press STRAIGHT repeatedly to select a

frequency steps.

Switch this unit to the standby mode, and

then switch it on again.

The power turns on, with the settings you made

configured.

FM/AM tuner frequencies will differ depending on

the country or region where the unit is being used.

This explanation uses a display with frequencies used

in U.K. and Europe models.

TU-AM9/FM50

SL SR

FM87.50MHz

VOL.

SBL SBR

Continues to the

1 : Refer to the “Extended functionality that can be configured as

needed (Advanced Setup menu)” (☞

p. 66) for details on the

Advanced Setup menu.

En 36

PLAYBACK

FM/AM tuning

Use eTUNING H / I to set a frequency to

receive.

TUNING H

Increases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a higher frequency than the current one. J1

TUNING I

Decreases the frequency. Press and hold this key for

longer than a second to search automatically for a station

on a lower frequency than the current one. J1

Registering and recalling a

frequency (Preset tuning)

You can register up to 40 FM/AM stations as preset

stations. There are two methods of presetting stations,

“Auto Preset” and “Manual Preset.” Use one of these

methods to register stations.

■

Presetting FM stations

automatically (Auto Preset)

The tuner detects FM stations with strong signals and

registers up to 40 automatically.

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “Auto Preset.”

TUNER

eTUNING H / I

jCursor B / C / D / E

jENTER

lNumeric keys

qOPTION

OPTION

TUNER

TUNING

ENTER

7 856

1234

ENT

EIVER

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

■ Entering a frequency number

In normal tuning mode, use the lNumeric keys on

the remote control to enter a frequency. Leave the

decimal point out when entering a number. J2

For example, enter as follows to select a station on

98.50MHz.

STEREO

TUNED

SL SR

SBL SBR

FM98.50MHz

STEREO

TUNED

VOL.

Lights up when receiving

a broadcast from a station

Lights up when receiving

a stereo broadcast

9 8

■ When signal reception is poor

When you are receiving an FM broadcast and cannot

obtain a stable stereo broadcast, you can force this

unit to receive in a monaural mode.

Press dTUNER to switch to the tuner

input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to select “FM Mode.”

Press jENTER and use jCursor D / E to

select “Mono.”

When setting is completed, press

qOPTION to close the Option menu.

To return this unit to its original settings, use the

same procedure and select “Stereo” in step 4.

FMMode

OPTION

VOL.

SBL SBR

FMMode:Mono

9850

VOL.

AM stations cannot be automatically registered. Use

manual station preset (☞

p. 37).

SL SR

Auto Preset

OPTION

VOL.

SBL SBR

Continues to the

1 : When searching for a station, release the key once the search has

started.

2 : “Wrong Station!” appears on the front panel display when you

enter a frequency that is out of receivable range. Make sure that

the frequency entered is correct.

3 : Refer to the “Configuring the settings specific for each input

source (Option menu)” (☞

p. 45) for details on the Option menu.

En 37

PLAYBACK

FM/AM tuning

Press jENTER, then press ePRESET F /

G or jCursor B / C to choose the present

number from which to start the Auto Preset

function.

Auto Preset will begin approximately 5 seconds after

you select a preset number.

If you do not select a preset number, Auto Preset will

begin approximately 5 seconds after “READY” is

displayed.

The Option menu closes automatically when presetting

is complete. J1

■

Registering stations manually

(Manual Preset)

Select stations manually and register them as presets

individually.

Tune in to the station you want to register,

referring to “Selecting a frequency for

reception (Normal tuning)” (☞

p. 35).

Use one of the following methods to

receiving.

■ Registering to a preset number to which no

station is registered

Press eMEMORY for 3 seconds or longer.

The station will be registered automatically to the lowest

open preset number (or the next number after the one

registered most recently).

■ Designating a preset number for

registration

Press eMEMORY once, to display “Manual Preset” on

the front panel display. After a small wait, the preset

number that the station has been registered to will

appear.

Press ePRESET F / G to select the preset to register

the station to, and then press eMEMORY to register.

MEMORY

ePRESET F / G

jCursor B / C

jENTER

jRETURN

RETURN

MEMORY

PRESET

ENTER

EIVER

PTI

ETU

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

To cancel registration, press jRETURN.

SL SR

01:FM87.50MHz

READY

VOL.

SBL SBR

Selecting a preset number

Status Frequency

Preset number

SEARCH MEMORY

During Auto Preset

Preset for stations

SL SR

Auto Preset

FINISH

VOL.

SBL SBR

When Auto Preset is complete

STEREO

TUNED

SL SR

01:FM98.50MHz

MEMORY

VOL.

SBL SBR

Registered frequencies

To cancel registration, press jRETURN or do not

operate the remote control for about 30 seconds.

STEREO

TUNED

SL SR

01:Empty

9850

VOL.

SBL SBR

Preset number

The newly registered frequency

Empty, or the frequency registered

most previously

Blinks

1 : The preset with the lowest preset number will be selected

automatically immediately after presetting.

En 38

PLAYBACK

FM/AM tuning

Recalling a preset station

You can call preset stations registered by automatic

station preset or manual station preset. J1

To select a registered station, press ePRESET

F / G to select the preset number of the

station. J2

Clearing preset stations

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J3

Use jCursor B / C to display “Clear

Preset” and press jENTER.

Use jCursor B / C to select the preset

number you want to clear, and press

jENTER to clear it.

Press qOPTION to finish this operation.

Radio Data System tuning

(U.K. and Europe models only)

Radio Data System is a data transmission system used by

FM stations in many countries. This unit can receive

various Radio Data System data such as “Program

Service,” “Program Type,” “Radio Text,” “Clock Time”

when receiving Radio Data System broadcasting

stations.

■

Displaying the Radio Data System

information

You can display the 4 types of the Radio Data System

information: “Program Service,” “Program Type,”

“Radio Text,” “Clock Time.”

Tune into the desired Radio Data System

broadcasting station.

dTUNER

ePRESET F / G

jCursor B / C

jENTER

jRETURN

lNumeric keys

qOPTION

OPTION

RETURN

TUNER

PRESET

ENTER

7 856

1234

ENT

EIVER

ETU

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

Press jRETURN to cancel the operation.

Repeat this operation to clear the registration of

multiple numbers.

SL SR

01:FM98.50MHz

CLEAR

VOL.

SBL SBR

The number of the preset to be cleared

Blinks Registered frequencies

We recommend that you use the automatic preset

tuning to tune into the Radio Data System

broadcasting stations (☞

p. 36).

Continues to the

1 : Preset numbers to which no stations are registered will be

skipped. “No Presets” or “No Presets in Memory” is displayed

when there are no stations are registered.

2 : To select a station by selecting a preset number, use the

lNumeric keys to enter the preset number of the station you

want to listen. When an invalid number is entered, “Wrong Num.”

appears on the front panel display. Check that you have entered

the correct number.

3 : Refer to the “Configuring the settings specific for each input

source (Option menu)” (☞

p. 45) for details on the Option menu.

En 39

PLAYBACK

FM/AM tuning

Press fINFO repeatedly until the desired

information is displayed.

Information on the display changes as you press the

key. The kind of information is displayed for a while

and then the information is displayed. J1

Contents of information are as follows.

Front panel display (When “Program Type”

selected)

■

Automatic traffic information

reception (U.K. and Europe models

only)

When the tuner is active, this unit can automatically

search for and receive transmissions from traffic

information broadcast stations. To start this function:

Press dTUNER to switch to the tuner input.

Press qOPTION to display the Option

menu. J2

Use jCursor B / C to select

“TrafficProgram.”

Press jENTER to start the search function.

When a traffic station is found, it will appear on the

display and the Option menu will close.

OPTION

RETURN

TUNER

INFO

ENTER

EIVER

ETU

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

OP-U

PLAY

SOURCE

DOCK

[

]

[

]

dTUNER

fINFO

jCursor B / C

jENTER

jRETURN

qOPTION

Type of information Description

Program Service Displays the name of the Radio Data

System program service currently

being received.

Program Type Displays the type of the Radio Data

System program currently being

received.

Radio Text Displays the information on the

Radio Data System program

currently being received.

Clock Time Displays the current time.

DSP Program Displays the currently selected

sound field program.

Audio Decoder Displays the currently selected

surround decoder.

ProgramService ProgramType RadioText

ClockTime

DSPProgramAudioDecoder

(Frequency display)

“Program Service,” “Program Type,” “Radio Text” and

“Clock Type” do not appear when the radio station

does not provide the Radio Data System service.

STEREO

TUNED

SL SR

SBL SBR

CLASSICS

10800

VOL.

Frequency

Program Type

SL SR

SBL SBR

VolumeTrim

OPTION

VOL.

SL SR

SBL SBR

TrafficProgram

OPTION

VOL.

• The transmission search will begin in approximately

5 seconds. Or, when the status indicator reads

“READY,” you can begin the search immediately by

pressing

jENTER.

• By pressing

jRETURN right before or during a

search, it will return to the Option menu.

• When the status is “READY,” use

jCursor B / C to

start a search in the specified direction.

jCursor B: Searches upward from the current

frequency.

jCursor C: Searches downward from the current

frequency.

If the receiver cannot find a traffic station, “TP Not

Found” will appear on the display, and the Option

menu will shortly close.

SL SR

SBL SBR

TrafficProgram

READY

VOL.

Status

STEREO

TUNED

SL SR

TPFM101.30MHz

FINISH

VOL.

SBL SBR

Traffic information broadcast station (Frequency)

1 : “PTY Wait,” “RT Wait,” or “CT Wait” may appear when Program

Type, Radio Text, or Clock Time is displayed. That shows this

unit is receiving data (or stopping receiving data). If the data is

receivable, the corresponding information is displayed after a

while.

2 : Refer to the “Configuring the settings specific for each input

source (Option menu)” (☞

p. 45) for details on the Option menu.

En 40

PLAYBACK

Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote

control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞

p. 34) to give

compressed audio formats such as MP3 a sharper, more dynamic sound.

Connecting the Yamaha iPod

universal dock

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit. Refer to the

operating instructions of the iPod universal dock for

information on how to connect your iPod/iPhone.

Switch this unit on and place your iPod/iPhone in the

dock. The unit is now ready for playback.

Controlling an iPod™/iPhone™

After setting your iPod/iPhone in your dock, just press

dDOCK to switch to DOCK input to play your iPod/

iPhone.

The iPod/iPhone can be operated in the following two

ways.

Simple play mode:

Plays audio and video through this unit while viewing

the menu displayed on the iPod/iPhone screen.

Menu browse mode:

Plays the iPod/iPhone while viewing the menu displayed

on the TV.

Playing back tunes from your iPod™/iPhone™

• iPod touch, iPod (Click and Wheel including iPod classic), iPod nano, iPod mini, iPhone, iPhone 3G, and iPhone 3GS are supported (As of March 2010).

• When connecting an iPhone, please use a YDS-12.

• Some features may not be compatible depending on the model or the software version of your iPod.

• Some functions may not be available for some Yamaha iPod universal dock models. This explanation focuses on the YDS-12.

dDOCK

DOCK

EIVER

PTI

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

ENTER

V V

P-

PLAY

SOURCE

[

]

[

]

CAUTION

To prevent accidents, switch this unit to standby mode

before connecting an iPod universal dock.

SL SR

SBL SBR

iPodconnected

DOCK

VOL.

DOCK

NEN

VIDE

PTI

AXIA

AXIAL

(

)

IDE

Yamaha iPod universal dock

En 41

PLAYBACK

Playing back tunes from your iPod™/iPhone™

■

Playing only iPod/iPhone audio

through the unit

(Simple play mode)

Use the following remote control keys to operate

(playback, stop, skip, etc.) your iPod/iPhone. You can

check song information on the iPod/iPhone screen. J1

■

Playing iPod/iPhone viewing the

menu displayed on the TV

(Menu browse mode)

Operate the iPod/iPhone using the unit’s remote control,

while looking at the menu displayed on the TV.

Press dDOCK to switch to the DOCK input.

Press kDISPLAY to switch to menu browse

mode.

Press jCursor B / C to select the content

(music or video) that you want to play, and

press jCursor E. J2

Select iPod/iPhone menu items using

jCursor B / C / D / E, and press jENTER

to play.

The following screen appears on the display during

playback.

a Track number/total tracks

b Artist name

c Album title

d Song title

e Progress bar

f Elapsed time

g Shuffle and repeat icons

h iPod/iPhone status (playback, pausing, search

forward, search backward)

i Remaining time

INFO

ENTER

DISPLAY

DOCK

EIVER

PTI

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

SOURCE

[

]

[

]

dDOCK

fINFO

jCursor B / C / D / E

jENTER

kDISPLAY

k b

dDOCK Switch to the DOCK (iPod) input.

jCursor B / C

Move the cursor up and down to different

fields.

jCursor D / E

Return to the previous menu or enter the

menu you have selected.

jENTER Enter the selected menu.

kDISPLAY

Switches between simple play mode or

menu browse mode.

k w Searches backwards while held down.

k f Searches forwards while held down.

k b

Skip to the beginning of the currently

playing song. Pressing repeatedly skips

one song backwards with each press.

k a Skip to the beginning of the next song.

k s Stops playback.

k e Switches between playback and pause.

k p Switches between playback and pause.

• Information on the iPod/iPhone can only be displayed

in alphanumeric characters. “_” (underscore) is

displayed for characters that this unit cannot display.

• When displaying play information in menu browse

mode, song information (Artist, Album, Song) is

displayed on the front panel. Change the displayed

information by pressing

fINFO repeatedly.

• (Except iPod touch and iPhone) In menu browse

mode, the “Yamaha Mark” will be displayed on the

iPod/iPhone screen. You cannot directly control your

iPod/iPhone while this mark is displayed.

Press kDISPLAY again to return to simple play

mode.

iPod[Play][

FrankieZipper

1/9



0:51-7:44

Made-to-order



RoadtoIndia

|||||;;;;;;;;;;;;;;;

All

1 : Controls on the iPod/iPhone can also be operated in simple

playback mode.

2 : Videos will not be displayed when your iPod or Yamaha iPod

universal dock do not support the browser function for browsing

video files.

En 42

PLAYBACK

Playing back tunes from your iPod™/iPhone™

■

Shuffle/Repeat playback

You can use special playback functions such as shuffle

playback and repeat playback by first displaying the

Option menu.

Press dDOCK to switch to the DOCK input.

Press kDISPLAY to switch to menu browse

mode.

Press qOPTION to display the Option

menu. J1

Press jCursor B / C to select the desired

playback function, “Shuffle” or “Repeat,”

then press jENTER.

Shuffle

Plays back songs or albums in random order. When the

shuffle function is enabled, “ ” appears on the TV

screen.

Repeat

Plays songs or albums repeatedly.

When the repeat function is enabled, “ (One)” or

“ (All)” appears on the TV screen.

Press jCursor D / E to select the desired

playback function.

To close the Option menu, press qOPTION.

Play the iPod/iPhone.

Playback of the iPod/iPhone starts using the function

selected in step 5.

dDOCK

jCursor B / C / D / E

jENTER

kDISPLAY

qOPTION

OPTION

ENTER

DISPLAY

DOCK

EIVER

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

SOURCE

[

]

[

]

Off Does not play back songs or albums in

random order.

Songs Plays “Songs” back in random order.

Albums Plays “Albums” back in random order.

Off Does not play back songs or albums

repeatedly.

One Plays a “Song” back repeatedly.

All When all “Songs” have completed

playback, returns to the start and repeats

playback.

To disable Shuffle/Repeat playback, redo the above

steps, and return settings to “Off.”

■ To charge the iPod/iPhone when this unit

is in standby mode

If you connect an iPod/iPhone to the iPod universal

dock the iPod/iPhone will always charge when this

unit is turned on.

This unit can charge an iPod/iPhone even when in

standby mode (iPod Standby Charge function).

Check the HDMI Through/iPod Charge indicator on

the front panel of this unit to check whether this unit

is charging an iPod/iPhone during in standby mode.

While charging an iPod/iPhone, the HDMI Through/

iPod Charge indicator lights. When Standby Through

function is off, the indicator goes out after the

charging is complete.

If necessary, you can also disable the iPod Standby

Charge function.

All

Press dDOCK to switch to the DOCK

input.

Press qOPTION to display the Option

menu.

Use jCursor B / C to display “Standby

Charge” and press jENTER.

Use jCursor D / E to switch the setting

to “Off.”

When setting is completed, press

qOPTION to close the Option menu.

To enable the Standby Charge function again, carry

out this procedure again and change the “Standby

Charge” setting back to “Auto.”

DOCKOPTION

StandbyCharge

AutoOff

1 : Refer to the “Configuring the settings specific for each input

source (Option menu)” (☞

p. 45) for details on the Option menu.

En 43

PLAYBACK

You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible

portable music players. J1

Connecting a Yamaha Bluetooth

wireless audio receiver

Use the dedicated cable to connect the dock to the

DOCK jack on the rear panel of this unit.

The Bluetooth wireless audio receiver connection will be

complete when this unit is turned on.

Pairing Bluetooth™ components

Be sure to carry out pairing when connecting a Bluetooth

component for the first time, or when settings have been

deleted.

Refer to the operating instructions of your Bluetooth

component as necessary when carrying out pairing.

Press dDOCK to switch to the DOCK input.

Turn on the Bluetooth component you want

to pair with and set it to pairing mode.

Press qOPTION to display the Option menu

and use jCursor B / C to select “Pairing.”

Press jENTER to start pairing.

Make sure the Bluetooth component

recognizes the Bluetooth wireless audio

receiver.

When the device is recognized, it will appear in the

Bluetooth component list, for example as “YBA-10

YAMAHA.”

Select the Bluetooth wireless audio receiver

from the Bluetooth component list, and

enter a pass key “0000” into the Bluetooth

component. J2

Playing back tunes from Bluetooth™ components

NOTE

When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection

you must carry out pairing on both this unit and on the Bluetooth component.

dDOCK

eMEMORY

jCursor B / C

jENTER

jRETURN

qOPTION

OPTION

RETURN

MEMORY

ENTER

DOCK

EIVER

ETU

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

[

]

[

]

CAUTION

To prevent accidents, switch this unit to standby mode

before connecting a Bluetooth wireless audio receiver.

DOCK

NEN

VIDE

PTI

AXIA

AXIAL

(

)

IDE

Yamaha Bluetooth

wireless audio receiver

The Yamaha Bluetooth wireless audio receiver can be

paired with up to eight Bluetooth components. When

the ninth device is paired, the pairing settings for the

device which has not been used for the longest period

of time will be deleted.

SL SR

SBL SBR

Pairing

OPTION

VOL.

• To cancel pairing, press jRETURN.

• You can also press and hold

eMEMORY on the front

panel to begin pairing.

SL SR

SBL SBR

Searching...

DOCK

VOL.

SL SR

SBL SBR

Completed

DOCK

VOL.

When pairing occurs correctly

1 : This unit supports A2DP (Advanced Audio Distribution Profile)

of the Bluetooth profile.

2 : Depending on Bluetooth components, wireless connection is

carried out right after the pairing. In this case, “BT connected” is

displayed instead of “Completed.”

En 44

PLAYBACK

Playing back tunes from Bluetooth™ components

Using Bluetooth™ components

When pairing is complete, carry out the following

procedure to achieve a wireless connection between this

unit and the Bluetooth component. When the wireless

connection is complete, you playback from Bluetooth

components.

Press dDOCK to switch to the DOCK input.

Press qOPTION to display the Option

menu.

Use jCursor B / C to select “Connect” and

press jENTER. J1

Operate the Bluetooth component for

playback.

DOCK

jCursor B / C

jENTER

qOPTION

OPTION

ENTER

DOCK

EIVER

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

[

]

[

]

Depending on Bluetooth components, a wireless

connection is established automatically or by

operating the Bluetooth components. In that case, it is

not necessary to carry out the following procedure.

“Not found” is displayed when there is an error

connecting. Check that the following conditions have

been satisfied, and try to establish a wireless

connection again.

• Both this unit and the Bluetooth component are paired.

• The Bluetooth component is switched on.

• The Bluetooth component is within 10 meters/32 feet

of the Bluetooth wireless audio receiver.

To disconnect a wireless connection, repeat the same

steps, and in step 3, select “Disconnect.”

SL SR

SBL SBR

BTconnected

DOCK

VOL.

When wireless connection is complete

1 : “Disconnect” is displayed when a Bluetooth component has been

connected.

En 45

SETUP

This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from

playback devices, and other frequently used menu items.

Option menu display and setup

You can view the operations of Option menu on the front

panel display or on the OSD (On-Screen Display)

displayed on your TV while you use it. This explanation

uses references to the OSD display on your TV.

Use the dInput selector on the remote

control to select the Option menu you want

to display.

Press qOPTION.

The Option menu appears for the desired input source.

Select the desired control/setup item using

jCursor B / C and press jENTER.

The displayed Option menu items differ depending on

the input source.

For details, read the following Option menu items

section.

Select the desired menu item (or enable a

function) using jCursor B / C / D / E and

jENTER.

Parameters of the selected item are displayed. The

parameters you can set differ depending on the menu

items.

To close the Option menu, press qOPTION.

Option menu items

The following menu items are provided for each input

source.

Configuring the settings specific for each input source (Option menu)

dInput selector

jCursor B / C / D / E

jENTER

jRETURN

qOPTION

OPTION

RETURN

HDMI

AUDIO

1234

1256

V-AUX

TUNER

ENTER

DOCK

EIVER

ETU

LUM

NHANCER

R. DE

TRAI

IRE

RAN

MIT

SLEEP

PRESE

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

[

]

[

]

HDMI1OPTION

DecoderMode

.VolumeTrim

[ENTER]:Select

ExtendedSurround



AudioIn

SignalInfo

[]/[]:Up/Down

[

Option menu

• You can also use jRETURN to return to the previous

screen or close the Option menu.

• Certain selected menu items may automatically close

the Option menu when their functions are carried out.

For a few seconds after closing the Option menu, the

remote control keys may not function. If this occurs,

reselect the input source.

HDMI1-4 Volume Trim Decoder Mode Extended

Surround

Audio In Signal Info

AV1-2 Volume Trim Decoder Mode Extended

Surround

Audio In Signal Info

AV3-4 Volume Trim Decoder Mode Extended

Surround

Signal Info

AV5-6 Volume Trim

AUDIO1-2 Volume Trim

V-AUX Volume Trim

TUNER Volume Trim FM Mode Auto

Preset

Clear Preset TrafficProgram J1

iPod

(DOCK)

Volume Trim Shuffle Repeat

Standby Charge

Bluetooth

(DOCK)

Volume Trim Connect/

Disconnect

Pairing

1 : U.K. and Europe models only.

En 46

SETUP

Configuring the settings specific for each input source (Option menu)

■

Adjusting volume between input sources

Input source: All

Reduces any change in volume when switching between input

sources by correcting volume differences in each input source. You

can adjust this parameter for each input source.

■

Setting the format of digital audio signals

Input source: HDMI1-4, AV1-4 J1

Sets the format of digital audio to playback to DTS. For example, if

the format is not automatically detected correctly even during

playback of DTS format audio, this menu item can be used to set

the playback format to DTS.

■

Selecting the 5.1-channel signal playback

method

Input source: HDMI1-4, AV1-4 J1

Selects whether to reproduce 5.1-channel input signals in 6.1- or

7.1-channel when surround back speakers are used.

Volume Trim

Adjustable range -6.0 dB to 0.0 dB to +6.0 dB

Default setting 0.0 dB

Adjustment

increments

0.5 dB steps

Decoder Mode

Auto (Default) The audio format is automatically selected to match

the format of the input audio.

DTS Selects DTS signals only. Other input signals are not

reproduced.

Extended Surround

Auto (Default) Automatically selects the most suitable decoder if a

flag for reproducing surround back channel is present,

and reproduces the signals in 6.1- or 7.1-channel.

q PLIIx Movie Always reproduces signals in 7.1-channel using the

Dolby Pro Logic IIx Movie decoder whether or not

surround back channel signals are contained. You can

select this parameter when two surround back

speakers are connected.

q PLIIx Music Always reproduces signals in 6.1- or 7.1-channel

using the Dolby Pro Logic IIx Music decoder whether

or not surround back channel signals are contained.

You can select this parameter when one or two

surround back speakers are connected.

EX/ES Automatically selects the most suitable decoder for

input signals whether or not the flag for reproducing

surround back channel is present, and always

reproduces signals in 6.1-channel.

Off Always reproduces original channels whether or not

the flag for reproducing surround back channel is

present.

1 : AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”

function is on, and the source is used for the TV audio input (TV Audio In).

En 47

SETUP

Configuring the settings specific for each input source (Option menu)

■

Combining HDMI/AV1-2 input source

video and audio

Input source: HDMI1-4, AV1-2

Combines video from HDMI or AV input sources with analog/

digital audio inputs in situations such as:

– an playback device is connected with an HDMI cable but cannot

transmit audio through HDMI

– an playback device with component video output and analog

audio output (such as certain game consoles) are connected to the

system

To change assignments, select an input source (HDMI1-4 or AV1-2)

as the video input first, and then select audio input jacks in this

menu.

Set as follows according on the desired combination of audio input

jacks.

■

Displaying information on audio/video

signals

Input source: HDMI1-4, AV1-4 J1

Displays information on digital audio and video signals on the TV

screen.

Audio information

Video information

Audio In

Audio inputs Settings method

Optical digital audio

input

Select AV1 or AV4. Connect the external component

audio cable to the optical digital jack for the selected

input.

Coaxial digital audio

input

Select AV2 or AV3. Connect the external component

audio cable to the coaxial digital jack for the selected

input.

Analog audio input Select one of AV5, AV6, AUDIO1, or AUDIO2.

Connect the external component audio cable to the

audio jack for the selected input.

HDMI1OPTION

AudioIn

;;;;;;

AV1

Assignable audio input jacks

Inputs that change the audio source

• For details of settings, refer to “Receiving video signals from the

HDMI jack and audio signals from a jack other than HDMI”

(☞

p. 18) and “Component connections to analog audio output

devices” (☞

p. 19).

• To return audio inputs to their previous settings, display this item

again, and select the original input jack.

Signal Info

HDMI1OPTION

Channel3/2/0.1

AUDIO

FormatDolbyD

Sampling48kHz



InHDMI1080p

OutHDMI1080p

Bitrate384kbps

VIDEO

Menu item

Information

Format Format of audio signals.

Channel The number of input signal channels (front/surround/

LFE).

For example, if input signal channels are 3 front

channels, 2 surrounds and LFE, “3/2/0.1” is

displayed.

If a channel that cannot be expressed as the above, a

total number of channels such as “5.1ch” may be

displayed.

Sampling The sampling frequency of analog-to-digital

conversion.

Bitrate The bit rate of input signal per second.

In Format and resolution of video input signal.

Out Format and resolution of video output signal.

Message

(appears only

when an error

has occurred)

Error messages about HDMI signals and components.

Error message

HDCP Error HDCP authentication failed.

Device Over The number of connected HDMI

components is over the limit.

Out of Res. The connected monitor is not

compatible with the video input

signal.

• “No Signal” is displayed when no signals are being received, and

“---” is displayed if this unit cannot recognize the incoming

signal.

• The bit rate may vary during playback.

1 : AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”

function is on, and the source is used for the TV audio input (TV Audio In).

En 48

SETUP

Configuring the settings specific for each input source (Option menu)

■

Changing FM mode (Stereo/Monaural)

Input source: TUNER

Sets this unit to automatically match FM broadcast frequencies in

stereo, or to convert the frequency to monaural (☞

p. 36).

■

Automatically presetting FM radio

stations

Input source: TUNER

Automatically detects radio stations in the FM frequency and

registers them as preset stations (☞

p. 36).

■

Clearing preset FM stations

Input source: TUNER

Clears the preset stations (☞p. 38).

■

Searching for traffic information (U.K. and

Europe models only)

Input source: TUNER

Automatically searches for traffic information with the Radio Data

System (☞

p. 39).

■

Charging an iPod™/iPhone™ in standby

mode

Input source: DOCK (iPod)

Charges an iPod/iPhone stationed in the iPod universal dock while

the receiver is in standby mode (☞

p. 42).

■

Shuffle playback with iPod/iPhone

Input source: DOCK (iPod)

Changes the shuffle playback style on iPod (☞p. 42).

■

Repeat playback with iPod/iPhone

Input source: DOCK (iPod)

Changes the repeat playback style on iPod (☞p. 42).

■

Connect / Disconnect Bluetooth

component

Input source: DOCK (Bluetooth)

Switches communication with a Bluetooth component on and off

(☞

p. 44).

■

Pairing Bluetooth component

Input source: DOCK (Bluetooth)

Performs pairing of this unit and a Bluetooth component (☞p. 43).

FM Mode

Auto Preset

Clear Preset

TrafficProgram

Standby Charge

Shuffle

Repeat

Connect

Disconnect

Pairing

En 49

SETUP

You can configure various function settings of this unit using the Setup menu.

Setup menu display and settings

You can view the operations of Setup menu on the front

panel display or on the OSD (On-Screen Display)

displayed on your TV while you use it. This explanation

uses references to the OSD display on your TV.

Press iSETUP on the remote control.

Setup menu categories

Use the jCursor B / C to select the desired

menu and press jENTER.

Ex: Sound Setup menu

Use jCursor B / C to navigate the

submenus to find the desired setting and

press jENTER.

When multiple menu item is displayed, use

jCursor B / C to select the desired item.

Use jCursor D / E to change the setting.

You can return to the previous screen by pressing

jRETURN. You can change other items by repeating

step 4 and 5.

Press iSETUP to exit the Setup menu.

Setting various functions (Setup menu)

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

SETUP

RETURN

ENTER

EIVER

PTI

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

Speaker Setup Set parameters for speakers, such as

speaker status, and volume adjustment for

each speaker.

Sound Setup Set functions related to audio output, such

as adjustment of maximum volume and

of dynamic range.

HDMI Setup Set functions related to HDMI, such as

HDMI Control functions and video

conversion settings (resolution and aspect

ratio).

Function Setup Sets functions such as changing input

names and auto power down that make

the unit easier to use.

DSP Parameter Edit sound field programs.

Memory Guard Protects settings against accidental

alteration.

SetupMenu



;

SoundSetup

.

;

SpeakerSetup

[ENTER]:Enter



;

HDMI Setup





;

MemoryGuard



;

FunctionSetup



;

DSPParameter

[]/[]:Up/Down

[

;

SoundSetup



;

AdaptiveDRC

.

;

Lipsync

[ENTER]:Enter



;

DynamicRange





;

MaxVolume



;

Init.Volume

[]/[]:Up/Down

[

;

Init.Volume

Init.Volume

;;;;;

Off

[RETURN]:Return



[p]/[[]:Select

For a few seconds after closing the Setup menu, the

remote control keys may not function. If this occurs,

reselect the input source.

En 50

SETUP

Setting various functions (Setup menu)

Setup menu items

Setup menu

Manages settings for speakers

Speaker Setup submenu

■

Manual speaker setup

Adjusts the output characteristics of the speakers based on

manually set parameters. Some items in the “Config” submenu

take up a full screen. To display other items press jCursor B /

Subwoofer

Confirms the subwoofer.

Config

Level

Distance

Equalizer

Test Tone

Speaker Setup

Sound Setup

HDMI Setup

Function Setup

DSP Parameter

Memory Guard

Subwoofer

Front SP

Center SP

Sur. L/R SP

Sur.B L/R SP

Crossover Freq.

Subwoofer Phase

Extra Bass

HDMI Auto

Auto Delay

Manual Delay

Lipsync

Adaptive DRC

Dynamic.Range

Max Volume

Init.Volume

Control

TV Audio In

AudioReturnChan

Standby Through

Audio Output

Resolution

Aspect

Input Rename

AutoPowerDown

Dimmer

OSD Shift

(speakers)

(unit and speakers)

(speakers and frequency bands)

Config Manually manages speaker configuration, such as

speaker size (sound production capacity), and bass

audio processing.

Level Manually adjusts the volume of each speaker.

Distance Manually adjusts the output of each speaker based on

distance to the listening point.

Equalizer Selects an equalizer to adjust speaker output

characteristics.

Test Tone Generates test tones.

;

SpeakerSetup



;

Level

.

;

Config

[ENTER]:Enter



;

Distance





;

Equalizer



;

TestTone

[]/[]:Up/Down

[

Config

In the Config submenu, you can select the speaker size

characteristic (Large or Small). Select the size (sound

reproduction capacity) that matches your speakers.

When speaker size is set to “Small,” low-frequency components

of the speakers that you configured are produced from the

subwoofer (or from the front speakers if there is no subwoofer).

Yes (Default) Select this when you have a subwoofer connected.

During playback, the subwoofer will produce audio

from the LFE (low-frequency effect) channel and bass

audio from other channels. J3

None Select this when you do not have a subwoofer

connected. The front speakers will produce audio

from the LFE (low-frequency effect) channel and bass

frequency audio from other channels.

Woofer diameter

• 16 cm (6.5 in) or larger → Large

• 16 cm (6.5 in) or smaller → Small

1 : This menu item appears depending on the “Control” setting.

2 : This menu item appears depending on the “Resolution” setting.

3 : Enabling the “Extra Bass” setting allows both the subwoofer and the front

speakers to produce bass audio.

En 51

SETUP

Setting various functions (Setup menu)

Front SP

Selects the size (sound reproduction capacity) of the front

speakers. J1

Center SP

Selects the size of the center speakers.

Sur. L/R SP

Selects the size of the surround speakers.

Sur.B L/R SP

Selects the size of the surround back speakers.

Crossover Freq.

Sets the lower limit of low-frequency component output from

speakers set to “Small.”

Audio with a frequency below that limit will be produced from the

subwoofer or the front speakers. J3

Subwoofer Phase

Sets the phase of the subwoofer if the bass audio is lacking or

unclear.

Extra Bass

Allows the front channel low-frequency components to be

produced exclusively by the subwoofer, or by both the subwoofer

and the front speakers.

Small (Default) Select this for small speakers. The subwoofer will

produce front channel low-frequency

components. J2

Large Select this for large speakers. The front speakers will

produce all of the front channel frequency

components.

None Select this when there is no center speaker. The front

speakers will produce center channel audio.

Small (Default) Select this when a small center speaker is connected.

Large Select this when a large center speaker is connected.

None Select this when no surround speakers are connected.

The front speakers will produce surround channel

audio signals.

Small (Default) Select this when the surround speakers are small.

Large Select this when the surround speakers are large.

• When set to “None,” no sound is produced from the surround

back speaker even if that speaker is connected.

• When set to “None,” the sound field programs will change to

Virtual CINEMA DSP mode.

None Select this when no surround back speakers are

connected.

SMLx1 Select when one small surround back speaker is

connected.

SMLx2 (Default) Select when two small surround back speakers are

connected.

LRGx1 Select when one large surround back speaker is

connected.

LRGx2 Select when two large surround back speakers are

connected.

• When there are no surround speakers are inactive, the setting will

automatically change to “None.”

• You can set surround back audio signals, including from the

playback source, to be mixed down and produced from a single

speaker (6.1-channel layout) or produced from left and right

surround back speakers (5.1-channel layout).

40Hz 110Hz

60Hz 120Hz

80Hz (Default) 160Hz

90Hz 200Hz

100Hz

Normal (Default) Does not change the subwoofer phase.

Reverse Reverses the subwoofer phase.

On The subwoofer and the front speakers produce the

front channel low-frequency components.

Off (Default) Depending on the size of the front speakers, either the

front speakers or the subwoofer produce the front

channel low-frequency components.

When the “Subwoofer” is set to “None,” the “Extra Bass”

setting is disabled.

1 : When “Subwoofer” is set to “None,” you can only choose “Large.” If the front

speaker setting is “Small” and you change “Subwoofer” to “None,” it will

automatically change to “Large.”

2 : You can set the low-frequency components of audio signals transmitted from

the front speakers to the subwoofer by using “Crossover Freq.” setting.

3 : If your subwoofer has a volume control or a crossover frequency control, set

the crossover frequency to maximum and the volume to half (or slightly less).

En 52

SETUP

Setting various functions (Setup menu)

■

Controlling the volume of each speaker

Separately adjusts the volume of each speaker. Use jCursor B / C

to select the desired speaker and adjust the volume with jCursor

D / E.

■

Manually setting speaker distance

Adjusts the timing at which the speakers produce audio so that

sounds from the speakers reach the listening position at the same

time.

Selecting adjustment units

Use jCursor B / C to select “Unit,” and then use jCursor D / E

to choose the units of length (meters or feet).

Setting distances for each speaker

Use jCursor B / C to select the speaker you want to configure,

and then use jCursor D / E to set the distance from the speaker

to your listening position.

■

Adjusting sound quality with the equalizer

Adjusts sound quality of tone using a parametric or graphic

equalizer.

EQ Type Select

Select an equalizer type.

Level

FR.L Front speaker L

FR.R Front speaker R

CNTR Center speaker

SUR.L Surround speaker L

SUR.R Surround speaker R

SBL Surround back L

SBR Surround back R

SB J1 Surround back

SWFR Subwoofer

Adjustable range -10.0 dB to +10.0 dB

Default setting 0 dB (FR.L/FR.R/SWFR)

-1.0 dB (CNTR/SL/SR/SBL/SBR/SB)

Adjustment

increments

0.5 dB

Distance

Unit Selects the distance unit (meters or feet).

Front L Front speaker L

Front R Front speaker R

Center Center speaker

Sur. L Surround speaker L

Sur. R Surround speaker R

Sur. B L Surround back speaker L

Sur. B R Surround back speaker R

Sur. B J1 Surround back speaker

SWFR Subwoofer

Adjustable range 0.30 m to 24.0 m (1.0 ft to 80.0 ft)

Default setting 3.00 m (10.0 ft) (Front L/Front R/SWFR)

2.60 m (8.5 ft) (Center)

2.40 m (8.0 ft) (Sur. L/Sur. R/Sur.B L/Sur.B R/Sur.B)

Adjustment

increments

0.10 m (0.5 ft)

Equalizer

Auto PEQ Uses the parametric equalizer to adjust sound quality.

Selecting this setting applies the tone settings

obtained using YPAO (☞p. 24). J2

The acoustic characteristics (EQ Type) selected when

YPAO has been carried out is displayed under Auto

PEQ.

GEQ (Default) Uses the graphic equalizer to adjust sound quality. By

pressing jENTER, you can adjust the

characteristics of the graphic equalizer.

Off Disables the equalizer.

1 : “SB” and “Sur.B” is displayed when using a 6.1 channel configuration only.

2 : Using YPAO to carry out acoustic measurement selects “Auto PEQ”

automatically. “Auto PEQ” does not appear if the measurement process has not

been carried out at least once.

En 53

SETUP

Setting various functions (Setup menu)

■

Generating test tones

Turns the test tone generator on or off.

■ Adjusting the graphic equalizer

When “EQ Type Select” is displayed, use

jCursor D / E to select “GEQ” and press

jENTER.

Check that “Channel” selects and use jCursor D

/ E to select the speaker for which you want to

adjust the equalizer.

;

Equalizer

.Channel;;;;FrontL

63Hz

;;;;;;

0dB

160Hz

;;;;;;

0dB

400Hz

;;;;;;

0dB

1kHz

;;;;;;

0dB

2.5kHz

;;;;;;

0dB

6.3kHz

;;;;;;

0dB

16kHz

;;;;;;

0dB

[p]/[[]:Select

Frequency band Setting the volume level for

the selected frequency

Speaker

Press jCursor C repeatedly to select the

frequency you want to adjust, then use jCursor D

/ E to adjust the volume.

Raising volume: Press jCursor E.

Lowering volume: Press

jCursor D.

When you have finished making adjustments,

press iSETUP to close the Setup menu.

Frequency

range

63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/

16 kHz

Adjustable

range

-6.0 dB to 0 dB to +6.0 dB

Default setting 0 dB

Adjustment

increments

0.5 dB

You can use jCursor B / C to select another frequency or

return to step 2. Repeat steps 2-3 to adjust the tone to your

liking.

Test Tone

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is selected, test

tones are produced constantly.

You can use the test tone in a variety of circumstances. For

example, you can adjust the volume balance settings for each

speaker, or whenever you adjust the settings on the internal

graphic equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you have finished

making adjustments.

En 54

SETUP

Setting various functions (Setup menu)

Setting the audio output function of this

unit

Sound Setup submenu

■

Synchronizing audio/video output

Adjusts the delay between audio and video output (Lipsync

function).

HDMI Auto

When connecting to a TV via HDMI, automatically adjusts output

timing if the TV supports an automatic lipsync function.

Auto Delay

Fine-adjust the audio output timing by entering the correction time

provided when “HDMI Auto” is set to “On.”

Manual Delay

Manually adjusts the correction time. Select this when the monitor

does not support the automatic lipsync function or “HDMI Auto” is

set to “Off.”

■

Auto-adjusting the sound level to make

even low volumes more audible

Adjusts the dynamic range in conjunction with the volume level

(from minimum to maximum). When you play audio at night or at

low volumes, it is a good idea to set parameter to “Auto.” J1

When the “Auto” is selected, it adjusts the dynamic range as

follows.

Lipsync Adjusts the delay between video and audio output.

Adaptive DRC Auto-adjusting the sound level to make even low

volumes more audible.

Dynamic Range Selects the dynamic range adjustment method for

Dolby Digital and DTS playback.

Max Volume Sets the maximum volume for this receiver.

Init.Volume Sets the initial volume for when this receiver is turned

on.

;

SoundSetup



;

AdaptiveDRC

.

;

Lipsync

[ENTER]:Enter



;

DynamicRange





;

MaxVolume



;

Init.Volume

[]/[]:Up/Down

[

Lipsync

Off (Default) Select this when the connected monitor does not

support the automatic lipsync function or you do not

want to use the automatic lipsync function. Set the

correction time in “Manual Delay.”

On Select this when the monitor supports the automatic

lipsync function. Fine-adjust the correction time in

“Auto Delay.”

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Adjustable range 0 ms to 240 ms

Adjustment

increments

1 ms

Default setting 0 ms

Adaptive DRC

Auto Adjusts the dynamic range automatically.

Off (Default) Does not adjust the dynamic range automatically.

Auto

Off

Auto

Off

Input Level Input Level

Volume: low Volume: high

Output Level

1 : The Adaptive DRC setting is also effective when you use headphones.

En 55

SETUP

Setting various functions (Setup menu)

■

Auto-adjusting Dolby Digital and DTS

dynamic range

Selects the dynamic range adjustment method for audio bitstream

(Dolby Digital and DTS) signal playback.

■

Setting the maximum volume

Sets a maximum volume level so that the audio is not played too

loudly. The default setting of +16.5 dB produces the highest

volume.

■

Setting the startup volume

Sets the initial volume for when this receiver is turned on. When

this parameter is set to “Off,” the volume is set at the level when the

receiver last entered standby mode. J1

Setting HDMI functions

HDMI Setup submenu

Dynamic Range

Min/Auto (Min) Sets the dynamic range suitable for low volume

or a quiet environment, such as at night, for bitstream

signals except for Dolby TrueHD signals.

(Auto) Adjusts the dynamic range for Dolby TrueHD

signals based on input signal information.

STD Adjusts the dynamic range for optimum volume for

regular home use.

Max (Default) Produces audio without adjusting the dynamic range.

Max Volume

Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)

Default setting +16.5 dB

Adjustment

increments

5.0 dB

Init.Volume

Adjustable range Off, Mute, -80 dB to +16.5 dB

Default setting Off

Adjustment

increments

0.5 dB

Control Turns the HDMI Control on or off.

TV Audio In J2 Chooses automatically selected audio input in

conjunction with TV operation when the

HDMI Control is turned on.

AudioReturnChan J2 Transmits audio/video output to the TV and

audio input from the TV through a single

HDMI cable.

Standby Through J2 Selects whether HDMI audio/video signals will

be continue to be produced when this unit is on

standby.

Audio Output J2 Selects the audio output device connected to

this unit via HDMI jacks.

Resolution Sets the resolution of video signals converted

from analog to HDMI.

Aspect J3 Sets the horizontal-to-vertical ratio (aspect

ratio) of video signals converted from analog to

HDMI.

;HDMI Setup

TV Audio In

;;;;;AV4

.Control

;;;;;;;;;

[p]/[[]:Select

AudioReturnChan

;

Off



Resolution

;;;*Thrgh

[]/[]:Up/Down

[

1 : When you set the “Max Volume” at a lower level than “Init.Volume,” the “Max

Volume” setting has priority.

2 : This menu item appears depending on the “Control” setting.

3 : This menu item appears depending on the “Resolution” setting.

En 56

SETUP

Setting various functions (Setup menu)

■

Receiver operation via TV (HDMI Control)

Set the HDMI Control function to “On” to operate devices

connected via HDMI. If the TV or other external components

support HDMI Control (ex. Panasonic VIERA Link), you can use

the remote controls of those devices to operate some of this unit’s

functions, and to synchronize this unit with the operation of those

devices.

Please refer to “Switching the input source on this unit

automatically when listening to TV audio” (☞

p. 69) for

instructions.

■

Selecting an input source to assign audio

input for the TV

Select the input source that matches operations carried out on the

TV while the HDMI Control function is on.

When using a TV that supports Audio Return Channel function and

the function is enabled, the audio input for the TV is assigned to

the input source selected here. J2

■

Listening to TV audio via single HDMI

cable (Audio Return Channel)

You can enable or disable the Audio Return Channel function.

When using a TV that supports Audio Return Channel function and

the function is enabled, the TV’s audio output is transmit to this

unit via an HDMI cable.

The TV audio input to this unit is regarded as the input source

selected in “TV Audio In.” J2

By means of this function, you do not need to connect the TV’s

audio output (digital audio output or analog audio output) to the

unit.

When the TV audio is input to the unit using Audio Return

Channel, “TV” is displayed on the front panel display.

■

Transmitting HDMI audio/video to the TV

during standby mode (Standby Through)

This function allows audio/video signals to continue to be

transmitted to a TV connected to HDMI jacks 1-4 even when this

unit is in standby mode.

Control

Off (Default) Sets HDMI Control to “Off.”

On Sets HDMI Control to “On.” J1

If this unit is connected to HDMI devices that do not support the

HDMI Control function, these functions will not operate.

TV Audio In

AV1 to AV6 Assigns any of the AV1-6 input source for the audio

input from the TV.

AUDIO1/AUDIO2 Assigns AUDIO1 or AUDIO2 input source for the

audio input from the TV.

Default setting AV 4

• “TV Audio In” is only displayed with the HDMI Control function

(Control) is set to “On.”

• Please refer to “Using the HDMI Control function” (☞

p. 68) for

setting instructions.

• For details on inputting the audio signal from the TV, refer to

“Listening to TV audio” (☞

p. 17).

AudioReturnChan

Off (Default) Sets the Audio Return Channel to “Off.”

On Sets the Audio Return Channel to “On.”

• “AudioReturnChan” is only displayed with the HDMI Control

function (Control) is set to “On.”

• Please refer to “Single HDMI cable input to TV audio with Audio

Return Channel function” (☞

p. 70) for setting instructions.

SL SR

SBL SBR

AV4

VOL.

Standby Through

Off (Default) Sets Standby Through to “Off.”

On Transmits audio/video signals from the selected

HDMI input source to the TV.

• When HDMI Control is “On,” Standby Through function is

automatically enabled and “Standby Through” is not displayed.

• When the Standby Through function is “On,” audio/video signals

will continue to be transmitted to the TV from the selected HDMI

input source when this unit is in standby mode. You can change

the HDMI input source to transmit signals during the standby

through mode by using

dHDMI1-4 on the remote control. When

the input source is changed, the HDMI Through/iPod Charge

indicator on the front panel blinks twice.

• When the Standby Through function is on, the HDMI Through/

iPod Charge indicator on the front panel lights during the standby

mode. When this indicator is lit, this unit consumes 1 to 3 W of

power.

1 : When the HDMI Control is “On,” the Standby Through function is

automatically enabled. When this unit enters standby mode, the audio and

video signals from the last-selected HDMI input source will continue to be

transmitted to the TV.

2 : While the Audio Return Channel function is on, the jack selected for the input

source cannot be used.

En 57

SETUP

Setting various functions (Setup menu)

■

Changing the output destination of HDMI

input audio signals

Choose whether to playback audio from an external component

such as a BD/DVD player connected via HDMI through this unit or

through a TV.

■

Setting resolution of analog video signals

converted to HDMI

Sets the resolution during up-scaling (when analog video input is

converted to HDMI video).

■

Setting the aspect ratio

Sets the horizontal-to-vertical ratio (aspect ratio) of analog video

converted to HDMI video signals.

Audio Output

Amp (Default) Outputs audio through this unit only. When this

setting is selected, the external component outputs an

audio format compatible with this unit.

TV Outputs audio through a TV only. When this setting is

selected, the external component outputs an audio

format compatible with the TV. J1

Amp+TV Outputs audio from the TV and this unit. When this

setting is selected, the external component outputs an

audio format compatible with this unit and TV.

“Audio Output” is only displayed with the HDMI Control

function (Control) is set to “Off.”

Resolution

Thrgh (Default) No up-scaling.

480p Upscales to 480p (progressive).

720p Upscales to 720p (progressive).

1080i Upscales to 1080i (interlace).

1080p Upscales to 1080p (progressive).

• Video resolution of 480p or less from certain old game console

cannot be converted to HDMI video. Connect the game unit to

video input on this unit, and connect VIDEO (MONITOR OUT)

jack to TV.

• Resolution of HDMI output converted from 720p or 1080i analog

video signals cannot be upscaled.

• When a TV is connected to this unit via the HDMI jack, this unit

automatically detects a resolution that the TV supports. An

asterisk (*) appears to the left of the detected resolution.

• If this unit cannot detect the resolution that the TV supports, set

“MON.CHK” in the Advanced Setup menu to “SKIP” (☞

p. 67)

and try again.

Aspect

Thrgh (Default) Sets the horizontal-to-vertical ratio (aspect ratio) of

analog video converted to HDMI video signals.

16:9 Transmits 4:3 aspect ratio video signals to a 16:9 TV

with black bands on either side of the screen.

• “Aspect” is not displayed when “Resolution” is set to “Thrgh.”

• The setting is automatically changed to “Off” for video input with

aspect ratios other than 4:3.

• Changing the aspect ratio for HDMI video input or analog video

signals of 720p, 1080i, or 1080p has no effect.

1 : When “TV” is selected, the speakers of this unit do not output sound.

En 58

SETUP

Setting various functions (Setup menu)

Making the receiver easier to use

Function Setup submenu

■

Changing input source names

Changes the input source names to be displayed on the

front panel display.

You can change an input source name by choosing from

a list of templates, or make one of your own.

SETUP

RETURN

ENTER

EIVER

PTI

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

OP-U

PLAY

SOURCE

DOCK

[

]

[

]

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

Input Rename Changes the input source names.

AutoPowerDown Goes enter standby mode if you leave it

without operating.

Dimmer Sets the brightness of the front panel

display.

OSD Shift Adjusts the top and bottom positions of

menus displayed on the screen (On-

Screen Display).

Input Rename

■ Selecting a template

Select “Input Rename” from the Setup

menu and press jENTER.

;

FunctionSetup



;

AutoPowerDown

.

;

InputRename

[ENTER]:Enter



;

Dimmer





;

OSDShift

[]/[]:Up/Down

[

;

InputRename1/3

.HDMI1.

pHDMI1[

HDMI2.(HDMI2)

HDMI3.(HDMI3)

HDMI4.(HDMI4)

AV1.(AV1)

AV2.(AV2)

[]/[]:Up/Down

[p]/[[]:Template

[ENTER]:Edit

Renaming input source

Current

name

Select the input source that you want to

rename using jCursor B / C.

Use jCursor D / E to select a new name

from the following templates.

Confirm the new display name by

pressing jRETURN. Press iSETUP to

exit the Setup menu.

To cancel a name change, select the original name

and then press

jRETURN to exit renaming.

■ Entering an original name

Select “Input Rename” from the Setup

menu and press jENTER.

Blu-ray Satellite

DVD VCR

SetTopBox Tape

Game MD

TV PC

DVR iPod

CD HD DVD

CD-R (blank)

;

InputRename1/3

.HDMI1.

HDMI1

[

HDMI2.

(

HDMI2

)

HDMI3.

(

HDMI3

)

HDMI4.

(

HDMI4

)

AV1.

(

AV1

)

AV2.

(

AV2

)

[]/[]:Up/Down

[p]/[[]:Template

[ENTER]:Edit

Renaming input source

Select the input source that you want to

rename using jCursor B / C.

Press jENTER.

Use jCursor B / C to select the

characters you want to change, and use

jCursor D / E to enter those characters.

The following characters are available for input

source.

• A to Z, a to z

• 0 to 9

• Symbols (#, *, -, +, etc.)

• Space

Repeat step 4 until you have entered the

new input source name.

Confirm the new display name by

pressing jENTER. Press iSETUP to

exit the Setup menu.

To cancel a name change, press jRETURN.

;

InputRename

HDMI1.HDMI1

[p]/[[]:Position

[]/[]:Character

[ENTER]:Set

[RETURN]:Return

_________

En 59

SETUP

Setting various functions (Setup menu)

■

Goes enter standby mode automatically

when you leave it without operating

If you do not operate this unit or use the remote control for an

extended period of time, it will automatically go into standby mode

(Auto Power Down function). This function’s default setting is

“Off.” When you want to enable this function, set the amount of

time to pass before this unit will enter standby.

■

Setting the brightness of the front panel

display

Sets the brightness of the front panel display. Lowering the setting

dims the display.

■

Adjusting the position of On-Screen

Display

Adjusts the top and bottom positions of menus displayed on the

TV.

Increase this value to raise the menu, or decrease the value to lower

it.

Setting the sound field program

You can set the parameters for the sound field programs (☞p. 60).

Prohibiting setting changes

Prohibits setting changes to prevent careless changes being made

to the settings on Setup menu.

AutoPowerDown

Off (Default) Auto Power Down function is disabled.

4hours Goes into standby mode, when you have not operated

this unit for four hours.

8hours Goes into standby mode, when you have not operated

this unit for eight hours.

12hours Goes into standby mode, when you have not operated

this unit for twelve hours.

This unit starts a countdown of 30 seconds before entering the

standby mode. Pressing any key of the remote control during the

countdown cancels entering the standby mode and reset the

timer.

Dimmer

Adjustable range -4 to 0

Default setting 0

OSD Shift

Adjustable range -5 to 0 to +5

Default setting 0

Off (Default) Settings are not protected.

On Prohibits changes to the settings on Setup menu until

it is returned to “Off.”

While set to “On,” the unit displays “Memory

Guard!” when an attempt is made to change the

settings.

When this parameter is switched to “On,” “ ” appears while

the Setup menu is displayed on the TV.

MOVIE

SUR.

;

DolbyPL

xMovie

.Sci-Fi

DSPLevel

;;;;;;;;

0dB



Initialize

[]/[]:Select

;

MemoryGuard

Off>On

[RETURN]:Return



[p]/[[]:Select

En 60

SETUP

Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters).

To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.

Press iSETUP to display the Setup menu.

Use jCursor B / C to select “DSP

Parameter” and press jENTER.

Use jCursor D / E to choose the sound

field program you want to edit.

Press jCursor B / C to select the

parameter that you want to change, and

press jCursor D / E to change the

parameter. J1

Once you have completed editing, press

iSETUP to close the Setup menu.

Setting sound field program parameters

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

EIVER

PTI

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

STRAIGHT

No Parameter

Straight

MOVIE

.Standard

SUR.;DolbyPL

xMovie

DSPLevel;;;;;;;;0dB

Initialize

[p]/[[]:Select

Sound field program to be edited

When there are multiple parameters in the sound field

program you are configuring, repeat step 4 as

necessary to change other parameters.

MOVIE

Standard

SUR.;DolbyPL

xMovie

.*DSPLevel;;;;;;;+2dB

Initialize

[p]/[[]:Adjust

Sound field parameter

Choices

■ To initialize the sound field parameters

To set the parameters of the sound field program back

to default, press jCursor C repeatedly during

editing to select “Initialize” and press jCursor E.

When following message is displayed, press

jCursor E again to initialize.

To cancel operations, press jCursor D when “Press

Again” appears and return to the original display.

MOVIE

Standard

INITIALIZE

Pressagain[[]

toinitialize.

[[]:Done

[p]:Cancel

1 : An asterisk (*) appears on the left of the sound field parameter

name displayed on the TV when you change the parameter from

its default setting.

En 61

SETUP

Setting sound field program parameters

CINEMA DSP parameters

Selects a surround decoder to be used with a sound field program

in the MOVIE category. J1

Change the effect level (level of the sound field effect to be added).

You can adjust the level of the sound field effect while checking the

sound effect.

Parameters usable in certain sound field

programs

2ch Stereo only

Automatically bypasses the DSP circuit and tone control circuit

depending on the condition of tone control etc., when an analog

sound source is played back. You can enjoy a higher quality sound.

7ch Stereo only

Adjusts the center channel volume. J2

Adjusts the volume of the surround L channel. J2

Adjusts the volume of the surround R channel. J2

Adjusts the volume of the surround back channel. J2

Straight Enhancer/7ch Enhancer only

Adjusts the effect level of the compressed music enhancer mode.

SUR.

Dolby PLIIxMovie

(Dolby PLII Movie)

Selects the Dolby Pro Logic IIx Movie (or

Dolby Pro Logic II Movie) decoder.

Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.

DSP Level

Adjustable range -6 dB to 0 dB to +3 dB

Default setting 0 dB

Adjust “DSP Level” as follows:

• The effect sound is too soft.

• There are no differences between effects of the sound field

programs.

→ Increase the effect level.

• The sound is dull.

• The sound field effect is added too much.

→ Reduce the effect level.

Direct

Auto (Default) Outputs sound by bypassing the DSP circuit and tone

control circuit when both tone controls of “Bass” and

“Treble” are set to 0dB.

Off Does not bypass the DSP circuit and tone control

circuit.

CT Level

Adjustable range 0 to 100%

Default setting 100%

SL Level

Adjustable range 0 to 100%

Default setting 100%

SR Level

Adjustable range 0 to 100%

Default setting 100%

SB Level

Adjustable range 0 to 100%

Default setting 35% (7.1-channel configuration)

50% (6.1-channel configuration)

Effect Level

High (Default) Standard effect.

Low Sets when the high-frequency signals of the source are

emphasized excessively.

1 : Surround decoders cannot be changed when used with the following MOVIE

sound field programs.

• Mono Movie

• Sports

• Action Game

• Roleplaying Game

2 : Not displayed when speakers are set to be inactive.

En 62

SETUP

Setting sound field program parameters

Parameters usable in surround decoder

Dolby PLIIx Music and Dolby PLII Music only

Adjusts the soundscape of the front sound field. Sends front left/

right channels sounds to the surround speakers as well as the front

speakers for a wraparound effect.

Spreads the center channel sound to the front left and right

speakers to suit your needs or preferences. Set this parameter to 0

for outputting the center sound from the center speaker only, or to 7

for outputting it from the front left/right speaker only.

Adjusts the difference in level between the front sound field and

the surround sound field. You can adjust the difference in level

created by the software being played back to obtain the preferred

sound balance.

The surround sound gets stronger as you make the value more

negative, and the front sound gets stronger as you make the value

more positive.

When Neo:6 Music is selected

Adjusts the front left and right channel output relative to the center

channel to make the center channel more or less dominant as

necessary.

Panorama

Off (Default) Disables the effect.

On Enables the effect.

Center Width

Adjustable range 0 to 7

Default setting 3

Dimension

Adjustable range -3 to STD to +3

Default setting STD (Standard)

C.Image

Adjustable range 0.0 to 1.0

Default setting 0.3

En 63

SETUP

You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code).

The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.

Selecting input source connected to DVD

player

Selecting input source connected to CD

player

Keys connecting external

components

cSOURCE A

Switches an external component on and off.

Cursor, jENTER, jRETURN

Operates the menus of external components.

DISPLAY

Switches an external component display.

External component operation keys

Functions as a recording or playback key of an external

component, or a menu display key.

lNumeric keys

Functions as numeric keys of an external component.

mTV control keys J1

Default remote control code

settings

The following remote control codes are assigned to input

sources as factory default settings. For a complete list of

available remote control codes, please refer to “Remote

Control Code Search” in the CD-ROM.

Controlling other components with the remote control

bTRANSMIT

cSOURCE A

dInput selector

iSETUP

jCursor B / C / D / E

jENTER

jRETURN

kExternal component

operation keys

kDISPLAY

lNumeric keys

mTV control keys

mINPUT

mMUTE

mTV VOL +/-

mTV CH +/-

qOPTION

OPTION

SETUP

RETURN

HDMI

AUDIO

TRANSMIT

1234

1256

V-AUX

TUNER

ENTER

7 856

1234

REC

ENT

TV VOL TV CH

TOP

POP-UP

DISPLAY

SOURCE

INPUT

MUTE

DOCK[ A ] [ B ]

EIVER

LUM

NHANCER

R. DE

TRAI

IRE

SLEEP

PRESE

UNIN

TERE

ADI

If you are unable to operate this unit after operating an

external component, press iSETUP or qOPTION

and then try operating the remote control again.

Playback/Stop

DVD player

CD player

Playback/Stop

DVD player

CD player

The remote control keys for controlling external

components are available only when the external

components have corresponding control keys.

mINPUT Switches video inputs of TV.

mMUTE Mutes TV volume temporarily.

mTV VOL +/- Controls the volume of TV.

mTV CH +/- Switches TV channels.

mA Turns on and off TV.

Input Category Manufacturer

Remote

control code

HDMI1 Blu-ray player/

recorder

Yamaha 2064

HDMI2 —— —

HDMI3 —— —

HDMI4 —— —

AV1 —— —

AV2 —— —

AV3 CD player Yamaha 5095

AV4 —— —

AV5 —— —

AV6 —— —

AUDIO1 —— —

AUDIO2 —— —

V-AUX —— —

A/B J2 —— —

DOCK DOCK Yamaha 5089

TUNER Tuner Yamaha 5085

1 : You can register remote control codes for external components to

dInput selector and remote control codes for TVs in mA

(

mTV control keys).

To register a TV remote control code to

dInput selector:

You can use the

jCursor, lNumeric keys, and mTV

control keys to control a TV you have registered.

To register a remote control code for a device other than a TV to

dInput selector:

You can use the

jCursor and lNumeric keys etc to control

external components, and the

mTV control keys to control

TVs registered in

mA.

2 : Use A/B for external component operations only. Set these keys to

remote control codes if you want to perform external component

operations without linking to input source selection of this unit.

For example, it may be convenient to assign remote control codes

for devices such as TVs.

En 64

SETUP

Controlling other components with the remote control

Registering remote control codes

for external component operations

The following section describes how to register remote

control code using an example of the registration of the

remote control codes of a Yamaha BD player connected

to HDMI2 jack.

Use “Remote Control Code Search” in the CD-

ROM to search the available remote control

codes from the category or manufacturer of

external components.

“2064” can be used for a Yamaha BD player.

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press dHDMI2 on the remote control to

switch the input source to HDMI2. J1

Perform the following steps to register the selected

input source here to the remote control code.

Enter a remote control code “2064” using

lNumeric keys. J2

Once the remote control code is registered successfully

the remote control will blink twice.

To switch between BD player linked to

scene selections, press hSCENE and at the

same time press dHDMI2 and hold it for

approximately 3 seconds.

Then you can operate the external components by

switching the input source to HDMI2, or selecting

HDMI2 in the registered scene.

Same steps for operating other external components,

press

hSCENE and at the same time press the input

source key selected in step 3 and hold it for

approximately 3 seconds.

dHDMI2

hSCENE

lNumeric keys

mTV control keys

nCODE SET

SCENE

DVD

RADIO

7 856

1234

ENT

TV VOL TV CH

CODE SET

INPUT

MUTE

RECEIVER

PTI

ETU

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ENTER

P-

PLAY

SOURCE

DOCK

[

]

[

]

• Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 2.

• Remote control code of an external component cannot

be set from the name or model number of a unit. Use

“Remote Control Code Search

” in the CD-ROM to

search the available remote control codes from the

category or manufacturer of external components.

• If multiple remote control codes exist, first set the first

code in the list, if it does not work then try the other

codes.

TRANSMIT

EIVER

LEEP

SOU

CODE SET

blinks twice

• If the registration fails, repeat the step 2.

• In case of an external component with multiple remote

control codes, the other remote control codes may be

supported. Repeat from step 2 with the other remote

control codes.

2 0

TRANSMIT

EIVER

LEEP

SOU

CODE SET

Registration successful: blinks twice

Registration failed: blinks 6 times

1 : When you want to register a remote control code to the mTV

control keys, press

mA (mTV control keys) in step 3.

2 : When you want to register a remote control code to the mTV

control keys, enter the TV remote control code in step 4.

En 65

SETUP

Controlling other components with the remote control

Resetting all remote control codes

Resetting all remote control codes for external

components to the initial factory settings.

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press iSETUP on the remote control.

Enter “9981” using lNumeric keys.

SETUP

lNumeric keys

nCODE SET

SETUP

7 856

1234

ENT

CODE SET

RECEIVER

PTI

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

ENTER

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

Perform each of the following steps within 1 minute.

Settings will be automatically stopped if more than 1

minute passes since the last operation. To reset, repeat

from step 2.

TRANSMIT

EIVER

LEEP

SOU

CODE SET

blinks twice

Once the remote control code is reset successfully the

remote control will blink twice.

If setup fails, repeat from step 1.

9 9

TRANSMIT

EIVER

LEEP

SOU

CODE SET

Reset successful: blinks twice

Reset failed: blinks 6 times

En 66

SETUP

The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows.

Displaying/Setting the Advanced Setup

Switch this unit to the standby mode.

Press A while pressing and holding STRAIGHT on

the front panel.

Release the keys when “ADVANCED SETUP” is displayed on

the front panel display.

After approximately a few seconds, the top menu items are

displayed.

Use PROGRAM l / h to select the item to be set

from the following items.

In the Advanced Setup menu, you can set the following settings.

Press STRAIGHT repeatedly to select the value you

want to change.

Switch this unit to the standby mode, and then

switch it on again.

The settings become effective and the unit is powered on. If

initialization is selected, it will be performed when the unit is

powered on again.

Setting the impedance of speakers

(U.S.A. and Canada models only)

Changes the unit settings depending on the impedance of the

speakers connected. J3

Avoiding crossing remote control signals

when using multiple Yamaha receivers

The remote control of the unit can only receive signals from a

receiver which has an identical ID (remote control ID). When using

multiple Yamaha AV receivers, you can set each remote control

with a unique remote control ID for its corresponding receiver.

On the contrary, if you are setting the same remote control ID for

all receivers, you can use one remote control to operate 2 receivers.

Extended functionality that can be configured as needed (Advanced Setup menu)

PHONES

SILENT

CINEMA

TONE

CONTROL

STRAIGHT

DVD

RADIO

INPUT

PROGRAM

SCENE

INFO

MEMORY

PRESET

FM AM

YPAO MIC

STRAIGHT

PROGRAM l / h

SP IMP. J1 Sets the impedance of speakers.

REMOTE ID Changes the remote control ID of a receiver.

BI-AMP Switches the bi-amp connections on or off.

MON.CHK Removes the up-scaling limitation on HDMI video

output.

TU J2 Selects one of the following FM/AM frequency steps.

INIT Initializes various settings for this unit.

6 MIN Select the impedance when 6Ω speakers are

connected.

8 MIN (Default) Select the impedance when speakers above 8Ω are

connected.

SPIMP.-8MIN

ID1 (Default) Receives the remote control signals set in ID1.

ID2 Receives the remote control signals set in ID2.

ID1 is set for both remote control and receiver by default. To

avoid crossing remote control, change the remote control ID for

both remote control and receiver.

REMOTEID-ID1

Continues to the

1 : U.S.A. and Canada models only.

2 : Asia and General models only.

3 : For detailed procedures of speaker impedance settings, refer to “(U.S.A. and

Canada models only) Changing speaker impedance” (☞

p. 12).

En 67

SETUP

Extended functionality that can be configured as needed (Advanced Setup menu)

High quality playback using bi-

amplification connections

Switches the bi-amp connections on or off. Refer to “Bi-

amp connection for front speakers” (☞

p. 13) for details.

Removing HDMI video output up-

scaling limits

Removes the up-scaling limitation on analog video

resolution when this unit and a TV are connected via

HDMI jacks.

If a resolution supported by the monitor cannot be

detected when configuring the up-scaling settings, this

setting will remove the output limitation.

Changing FM/AM frequency steps

(Asia and General models only)

You can select one of the following FM/AM frequency

steps: J1

Initializing various settings for this

unit

Initializes various settings stored in this unit and sets it

back to default.

Select the items to be initialized from the following.

SETUP

lNumeric keys

nCODE SET

SETUP

7 856

1234

ENT

CODE SET

RECEIVER

PTI

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

ENTER

V V

P-

PLAY

SOURCE

DOCK

[

]

[

]

■ To change the remote control ID

Press nCODE SET on the remote control

using a pointed object such as the tip of a

ballpoint pen.

Press iSETUP on the remote control.

Enter the desired remote control ID code.

To switch to ID1:

Enter “5019” using

lNumeric keys.

To switch to ID2:

Enter “5020” using

lNumeric keys.

Once the remote control code is registered

successfully the remote control will blink twice.

Perform each of the following steps within

1 minute. Settings will be automatically stopped if

more than 1 minute passes since the last operation.

To reset, repeat from step 1.

TRANSMIT

EIVER

LEEP

SOU

CODE SET

Registration successful: blinks twice

Registration failed: blinks 6 times

• If setup fails, repeat from step 1.

• Returns to ID1 after the remote control code is

initialized (☞

p. 65).

ON Turns bi-amp connections on.

OFF (Default) Turns bi-amp connections off.

YES (Default) Video output signals of a resolution not

supported by the TV will not be

transmitted.

SKIP This unit ignores the TV’s support

capability and transmits input video

signals to the TV.

BI-AMP-OFF

MON.CHK-YES

AM10/FM100 You can adjust the AM frequency by

steps of 10kHz and FM by steps of

100kHz.

AM9/FM50

(Default)

You can adjust the AM frequency by

steps of 9kHz and FM by steps of 50kHz.

DSP PARAM Initializes all parameters for the sound

field programs.

VIDEO Resets video conversion settings

(resolution/aspect ratio) in the Setup

menu and the OSD menus display

position.

ALL Resets this unit to default factory settings.

CANCEL (Default) Does not initialize.

TU-AM9/FM50

INIT-CANCEL

1 : For details on setting FM/AM frequency steps, refer to “FM/AM

tuning” (☞

p. 35).

En 68

SETUP

This unit supports the HDMI Control function, which allows you to

operate external components via HDMI. If you connect devices

that support HDMI Control (ex. Panasonic VIERA Link-

compatible TVs, DVD/Blu-ray Disc recorders, etc.) J1, you can

use the following operations with the remote control of any of

those devices:

– Power synchronization (on/standby)

– Volume control, including Mute

– Changing the volume of the audio output signal device (either the

TV or this unit)

Connect the TV, DVD recorder supporting HDMI

Control to this unit’s HDMI output jack.

Turn on the TV and this unit.

Refer to the TV’s instruction manual on how to operate external

components.

Set the TV and this unit’s HDMI Control function to

“On.”

Turn the TV off.

Other synchronized HDMI Control devices are turned off with the

TV. If they are not synchronized, turn them off manually.

Turn the TV on.

Confirm that this unit has turned on in conjunction with the TV. If

it is still off, turn it on manually.

Change the TV’s input setting to the input jack that

is connected to this unit (ex. HDMI1).

If DVD recorder that supports the HDMI Control

function are connected to this unit, turn them on.

Confirm that this unit is properly synchronized with

the TV through the following operations by using the

TV remote control.

• Power On/Off

• Volume Control

• Switching between audio output devices

Using the HDMI Control function

NOTE

The following is an example of how to connect this unit, a TV,

and a DVD recorder. Follow the instructions in your TV and

DVD recorder manuals, as well as the ones written below.

– Set the TV’s HDMI Control function to “On”

– Follow the AV amplifier connection instructions, and connect

this unit to the TV

HDMI

Control signal

(such as volume control)

Remote control of TV

This unit

HDMI connection

Receiver unit Confirm that “Control” in the Setup menu (HDMI

Setup) is set to “On” (☞p. 56). J2

TV/DVD Recorder Check the instruction manuals for those devices.

Receiver unit Confirm that the input source for the DVD recorder

has been selected. If a different input source has been

selected, please change it manually.

TV/DVD Recorder Confirm that the video signal from the recorder is

being properly received by the TV.

Operations 1-7 will not be required more than twice.

If this unit is not synchronized to the TV’s power operations,

check that the HDMI Control function is set to “On” for both

devices.

If they will not properly synchronize, unplugging and re-

plugging the devices and turning them on and off may solve the

problem.

1 : We recommend that you use TVs and DVD/BD recorders from the same

manufacturer whenever possible.

2 : The default setting for the HDMI Control function is “Off.”

En 69

SETUP

Using the HDMI Control function

■

Switching the input source on this

unit automatically when listening

to TV audio

When the HDMI Control (☞p. 68) is operating properly,

the input source of this unit is automatically changed to

match operations carried out on the TV. The default

input jack is AV4. If the AV4 optical digital jack is

connected to the TV’s audio output jack, then you can

enjoy TV sound through this unit right away.

To use other jacks to input audio signals from TV, carry

out the following procedure.

Connect this unit and the TV with an HDMI

cable.

Connect TV’s audio output to this unit.

The input jacks listed below are available to input TV’s

audio signals. Use the same jack type as used for the

TV.

Press iSETUP. J1

Use jCursor B / C to select “HDMI Setup”

and press jENTER.

Make sure that “Control” is selected, and

then use jCursor D / E to select “On.”

When “On” is selected, the following menu is

displayed.

Press jCursor C to select “TV Audio In”

and select the input jack connected in

step 2 using jCursor D / E.

Press iSETUP when you have finished

changing the settings.

If the TV hereafter transmits audio output signals, this

unit will automatically switch to the input source

chosen in step 6.

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

EIVER

PTI

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLA

SOURCE

DOCK

[

]

[

]

OPTICAL

(TV)

AV 4

NENT

VIDE

PTI

AV 1

AV 2

AV 3

AV 5

AV 6

AUDIO 1

AUDIO 2

AXIA

(CD

)

(BD

DVD)

DMI 2HDMI

HDMI

OUT

IDE

DOC

ANTENNA

NIT

NEN

VIDE

IDE

OPTICAL

Audio output

(Optical)

TV output jack Input jack

Optical digital audio output AV1 or AV4 (default)

Coaxial digital audio output AV2 or AV3

Analog stereo output AV5, AV6, AUDIO1, or AUDIO2

OPTICAL OPTICAL

(TV)

AV 2

AV 5

AV 6

AUDIO 1

AUDIO 2

COAXIAL COAXIAL

(CD)

NENT

VIDE

(

BD/DVD

)

HDMI 1

HDMI

IDE

NTENNA

NIT

NENT

IDE

Available input jacks

;HDMI Setup

StandbyThrough

;

Off

.Control

;;;;;;;;;

Off

[p]/[[]:Select

AudioOutput

;;;;

Amp



Resolution

;;;

*Thrgh

[]/[]:Up/Down

[

;HDMI Setup

TV Audio In

;;;;;

AV4

.Control

;;;;;;;;;

[p]/[[]:Select

AudioReturnChan

;Off



Resolution

;;;

*Thrgh

[]/[]:Up/Down

[

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 49)

for details on the Setup menu.

En 70

SETUP

Using the HDMI Control function

■

Single HDMI cable input to TV

audio with Audio Return Channel

function

When using a TV that supports HDMI functions and

Audio Return Channel function, audio/video output

from this unit to the TV or audio output from the TV to

this unit can be transmitted through a single HDMI cable

(Audio Return Channel function). Audio signals

transmitted from the TV to this unit can be assigned to

any input source.

Connect this unit and the TV with an HDMI

cable.

Press iSETUP. J1

Use jCursor B / C to select “HDMI Setup”

and press jENTER.

Make sure that “Control” is selected, and

then use jCursor D / E to select “On.”

When “On” is selected, the following menu is

displayed.

Press jCursor C to select “TV Audio In”

and select the input source that you want to

assign to the HDMI audio signals from the

TV using jCursor D / E. J2

Press jCursor C to select

“AudioReturnChan” and press jCursor E

to select “On.”

The Audio Return Channel function will turn on.

Press iSETUP when you have finished

changing the settings.

If the TV hereafter transmits audio output signals, this

unit will automatically switch to the input source

chosen in step 6.

iSETUP

jCursor B / C / D / E

jENTER

SETUP

ENTER

EIVER

PTI

RETURN

LUM

NHANCER

R. DE

TRAI

IRE

HDMI

AUDIO

RAN

MIT

SLEEP

V-A

PRESE

UNIN

TERE

ADI

V V

P-

PLA

SOURCE

DOCK

[

]

[

]

HDMI

OUT

ENTER

(BD

DVD

)

HDMI 2

HDMI 1

HDMI

HDMI 4

VIDE

SPEA

NTENN

NEN

VIDE

HDMI

TV audio

output

Video / Audio

output

;HDMI Setup

StandbyThrough

;

Off

.Control

;;;;;;;;;

Off

[p]/[[]:Select

AudioOutput

;;;;

Amp



Resolution

;;;

*Thrgh

[]/[]:Up/Down

[

;HDMI Setup

TV Audio In

;;;;;

AV4

.Control

;;;;;;;;;

[p]/[[]:Select

AudioReturnChan

;Off



Resolution

;;;

*Thrgh

[]/[]:Up/Down

[

1 : Refer to the “Setting various functions (Setup menu)” (☞p. 49)

for details on the Setup menu.

2 : While the Audio Return Channel function is on, the jack selected

for the input source cannot be used.

En 71

APPENDIX

Refer to the table below when this unit does not function properly.

If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service

center.

General

Troubleshooting

Problem Cause Remedy

See

page

The power will not

turn on.

The protection circuitry operated

3 times consecutively.

As a safety precaution, when the protection

circuitry operates 3 times consecutively, the

capability to turn on the power is disabled.

Please contact your nearest Yamaha dealer

or service center to request repair.

—

The unit enters

standby mode soon

after the power is

turned on.

The power cable is not completely

inserted.

Connect the power cable properly to an AC

wall outlet.

—

(When this unit is turned back on

and “CHECK SP WIRES!” is

displayed.) The protection

circuitry has been activated

because this unit was turned on

while a speaker cable was shorted.

Make sure that all speaker cables between

this unit and speakers are connected

properly.

This unit cannot be

turned off or does

not work properly.

The internal microcomputer is

hung-up due to an external electric

shock (such as lightning or

excessive static electricity) or by a

drop in power supply voltage.

Disconnect the power cable from the AC

wall outlet, wait about 30 seconds and then

plug it in again.

—

The batteries in the remote control

may have lost their charge.

Replace all batteries. 4

The unit enters

standby mode.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker with an impedance

of at least 6Ω.

—

(U.S.A. and Canada models)

Check that the speaker impedance settings

are correct.

After display of a

countdown on the

front panel, the unit

goes into standby

mode.

If you do not use take any action,

the Auto Power Down function

operates.

Turn on the unit, and play the source again. —

In the Setup menu “AutoPowerDown”

(“Function Setup” → “AutoPowerDown”),

increase the time until switching to standby

mode, or turn off the Auto Power Down

function.

Sound/images

suddenly go off.

The protection circuitry has been

activated because of a short circuit,

etc.

Check that the speaker wires are not

touching each other, then turn the unit back

on.

—

The sleep timer has turned off the

unit.

Turn on the unit, and play the source again. —

Problem Cause Remedy

See

page

En 72

APPENDIX

Troubleshooting

No sound. Incorrect input or output cable

connections.

Connect the cables properly. If the problem

persists, the cables may be defective.

If a DVI-HDMI cable is used to

connect the unit with an external

component, then it is necessary to

use an audio input jack for a

different input to output audio.

Display the HDMI Input Option menu for

the connected cable, select “Audio In,” and

select the jack to use for audio input.

Speaker connections are not

secure.

Secure the connections. 12

The HDMI components connected

to the unit do not support the

HDCP copy protection standards.

Connect HDMI components that support the

HDCP copy protection standards.

The audio input into the device is

set to playback through the TV.

In the Setup menu, set the HDMI Audio Out

(“Sound Setup” → “Audio Out”) to other

than “TV.”

No appropriate input source has

been selected.

Select an appropriate input source with

Input selector.

The volume is turned down or

muted.

Turn up the volume. —

Signals that this unit cannot

reproduce are being input from a

source component, such as a CD-

ROM.

Use an input source that has signals that can

be reproduced on this unit.

—

No picture. The video signal output from this

unit is not supported by a monitor

connected to this unit via the

HDMI OUT jack.

Displays the Advanced Setup menu and

select “VIDEO” in “INIT” to reset the video

parameters.

Displays the Advanced Setup menu and set

“MON.CHK” to “YES.”

An appropriate video input is not

selected on the TV.

Select an appropriate video input on the TV. —

Problem Cause Remedy

See

page

No sound is output

from a specific

speaker.

The speaker is malfunctioning.

Check the Speaker indicators on

the front panel display. If the

corresponding indicator lights up,

connect another speaker and check

if sound is output.

If sound is not output, the unit may be

malfunctioning.

The playback component or

speakers are not connected

properly.

Connect the cables properly. If the problem

persists, the cables may be defective.

12, 18

Output from that speaker is

disabled.

Check the Speaker indicators on the front

panel display. If the corresponding indicator

is turned off, try the following.

1) Change to a different input source.

2) With the selected sound field program,

sound is not output from that speaker. Select

another sound field program.

3) “None” may have been selected for that

speaker on this unit. Display “Speaker

Setup” in the Setup menu, and set respective

parameters to enable output from that

speaker (“Speaker Setup” → “Config”).

7, 50

The volume of that speaker is set

to the minimum in “Speaker

Setup” in the Setup menu.

Display “Speaker Setup” in the Setup menu

and adjust the volume (“Speaker Setup” →

“Level”).

(If hardly any sound comes from

one channel)

Speaker output balance is not set

correctly.

Balance the volume of each speaker from

“Level” in the Setup menu (“Speaker Setup”

→ “Level”).

Sound may not be output from

certain channels, depending on the

input source or sound field

program.

Try another sound field program. 30

Only the center

speaker outputs

substantial sound.

When a monaural source sound

field program is applied, for some

surround decoders, sound from all

channels is output from the center

speaker.

Try another sound field program. 30

Problem Cause Remedy

See

page

En 73

APPENDIX

Troubleshooting

No sound is heard

from the surround

speakers.

This unit is in straight decoding

mode and a monaural source is

being played back.

Press STRAIGHT to exit straight decoding

mode.

Sound may not be output from

certain channels depending on

input sources or sound field

programs.

Try another sound field program. 30

No sound is heard

from the surround

back speakers.

“Extended Surround” in the

Option menu is set to “Off,” or an

input signal does not contain a

surround back flag with “Extended

Surround” set to “Auto.”

Set “Extended Surround” other than “Off”

or “Auto.”

No sound is heard

from the subwoofer.

A subwoofer is not connected, or it

is inactive.

Check that a subwoofer is connected

correctly, and from the Setup menu

“Subwoofer” (“Speaker Setup” → “Config”

→ “Subwoofer”), set the subwoofer to

“On.”

The subwoofer is turned off. Turn the subwoofer power on.

If the subwoofer includes an Auto Power

Off function, then lower the Auto Power Off

sensitivity settings.

—

The source does not contain LFE

(☞p. 78) or low frequency signals.

—

The right

combination of audio

/ video jacks to

connect cannot be

found.

Combine input connected to the

external component video output

with another input audio jack.

Display the Input Audio menu for the

connected video output, select “Audio In,”

and select the jack to use for audio input.

The audio input

sources cannot be

played in the desired

digital audio signal

format.

The connected component is not

set to output the desired digital

audio signals.

Set the playback component properly

referring to its instruction manual.

—

There is noise

interference from

digital or radio

frequency

equipment.

This unit is too close to other

digital or radio frequency

equipment.

Move this unit further away from such

equipment.

—

Problem Cause Remedy

See

page

Noise/hum noise is

heard.

Incorrect cable connection.

Connect the audio cables properly.

If the problem persists, the cables may be

defective.

—

A DTS-CD is being played back. 1) When only noise is output

If a DTS bitstream signal is not properly

input to this unit, only noise is output.

Connect the playback component to this

unit by digital connection and playback the

DTS-CD. If the condition is not improved,

the problem may results from the playback

component. Consult the manufacturer of the

playback component.

2) When noise is output during playback or

skip operation

Before playing back the DTS-CD, display

the Option menu after selecting the input

source and set “Decoder Mode” to “DTS.”

—

The volume cannot

be increased, or the

sound is distorted.

The component connected to the

output jacks of this unit is not

turned on.

When the component connected to the

output jacks of this unit is not turned on, the

sound may be distorted, or the volume may

decreased due to the nature of AV receivers.

Turn on all components connected to this

unit.

—

“Max Volume” is set to a low

value.

Set it to a higher value. 55

Problem Cause Remedy

See

page

En 74

APPENDIX

Troubleshooting

HDMI™ Tuner (FM/AM)

Problem Cause Remedy

See

page

The front panel

display HDMI

indicator is flashing.

An error with the HDMI

connection has occurred.

Try re-inserting the HDMI cable. —

Confirm that HDMI video that is not

supported by the unit is not being input

(HDMI Input → Option menu → “Signal

Info”).

No picture or sound. The number of components is over

the limit.

Disconnect some of the HDMI components. —

The connected HDMI component

does not support high-bandwidth

digital copyright protection

(HDCP).

Connect an HDMI component that supports

HDCP.

—

(When using HDMI

Control function)

TV sound is not

output from this unit

when operating the

remote control of the

TV.

The TV audio output is not

connected to this unit, or the

setting to match operations carried

out on TV is not set.

Connect the TV audio output to this unit,

and then select the connected input source

in “TV Audio In” (Setup menu → HDMI

Setup → TV Audio In).

(When using Audio Return

Channel function)

The Audio Return Channel

function is not working.

Make sure that your TV supports Audio

Return Channel.

Set the Audio Return Channel function to

on (Setup menu → HDMI Setup →

AudioReturnChan).

Problem Cause Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections. 23

Switch to monaural mode. 36

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference. Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use TUNING H / I to manually select the

station.

“No Presets” is

displayed.

No preset stations are registered. Register stations you want to listen to as

preset stations before operation.

“Wrong Station” is

displayed.

An invalid FM/AM frequency has

been input.

Input a frequency that can be received. —

En 75

APPENDIX

Troubleshooting

iPod™/iPhone™

Problem Cause Remedy

See

page

The desired station

cannot be tuned into

with the automatic

tuning method.

The signal is weak, or the antenna

connections are loose.

Adjust the AM loop antenna orientation. 23

Use the manual tuning method. 35

Automatic station

preset does not

work.

Automatic station preset is not

available for AM stations.

Use manual station preset. 35

Continuous

crackling and

hissing noises are

heard.

The supplied AM loop antenna is

not connected.

Connect the AM loop antenna correctly

even if you use an outdoor antenna.

The noises may be caused by

lightning, fluorescent lamps,

motors, thermostats, or other

electrical equipment.

It is difficult to completely eliminate noise,

but it can be reduced by installing and

properly grounding an outdoor AM antenna.

Buzzing and whining

noises are heard.

A TV set is being used nearby. Move this unit away from the TV set. —

Display Cause Remedy

See

page

Loading... The unit is in the process of

recognizing the connection with

your iPod/iPhone.

—

The unit is in the middle of

acquiring song lists from your

iPod/iPhone.

—

Connect error There is a problem with the signal

path from your iPod/iPhone to the

unit.

Turn off the unit and reconnect the Yamaha

iPod universal dock to the DOCK jack of

the unit.

Remove your iPod/iPhone from the Yamaha

iPod universal dock and then place it back in

the dock.

Unknown iPod The iPod/iPhone being used is not

supported by the unit.

Connect an iPod/iPhone supported by the

unit.

—

iPod connected Your iPod/iPhone is properly

placed in the Yamaha iPod

universal dock.

—

Disconnected Your iPod/iPhone is removed from

the Yamaha iPod universal dock.

—

Unable to play The unit cannot playback the

songs currently stored on your

iPod/iPhone.

Check that songs are currently stored on

your iPod/iPhone.

—

En 76

APPENDIX

Troubleshooting

Bluetooth™ Remote control

Display Cause Remedy

See

page

Searching... The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

pairing.

—

The Yamaha Bluetooth wireless

audio receiver and the Bluetooth

component are in the process of

establishing a connection.

—

Completed The pairing is completed. —

Canceled The pairing is canceled. —

BT connected The connection between the

Yamaha Bluetooth wireless audio

receiver and the Bluetooth

component is established.

—

Disconnected The Bluetooth component is

disconnected from the Yamaha

Bluetooth wireless audio receiver.

—

Not found The Bluetooth component is not

found.

During pairing:

– pairing must be performed on the

Bluetooth component and this unit

simultaneously. Check if the Bluetooth

component is in pairing mode.

During connecting:

– check if the Bluetooth component is

turned on.

– check if the Bluetooth component is

within 10 m (32 feet) of the Yamaha

Bluetooth wireless audio receiver.

—

Problem Cause Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle. The remote control will function within a

maximum range of 6 m / 20 ft, and no more

than 30 degrees off-axis from the front

panel.

—

Direct sunlight or lighting (from

an inverter type of fluorescent

lamp, strobe light, etc.) is striking

the remote control sensor of this

unit.

Adjust the lighting angle, or reposition this

unit.

—

The batteries are weak. Replace all batteries. 4

The remote control ID of the

remote control and this unit do not

match.

Match the remote control ID of this unit and

the remote control.

External components

cannot be controlled

using the remote

control.

The remote control code is not

correctly set.

Set the remote control code correctly using

“Remote control code search” on the CD-

ROM.

—

Try setting another code for the same

manufacturer using “Remote control code

search” on the CD-ROM.

—

If this unit does not work when you press

Cursor B / C / D / E, do the following.

When the key does not work during DVD

disc menu operation: press the Input

selector again.

When the key does not work during Option

menu/Setup menu operation: press the key

corresponding to the current menu operation

again.

—

Even if the remote control code is

correctly set, there are some

models that do not respond to the

remote control.

—

En 77

APPENDIX

Audio information

Audio and video synchronization (lip sync)

Lip sync, an abbreviation for lip synchronization, is a technical term that

involves both a problem, and the capability of maintaining audio and video

signals synchronized during post-production and transmission.

Whereas the audio and video latency requires complex end-user

adjustment, HDMI version 1.3 incorporates an automatic audio and video

syncing capability that allows devices to perform this synchronization

automatically and accurately without user interaction.

Bi-amplification connection

A bi-amplification connection uses two amplifiers for a speaker. One

amplifier is connected to the woofer section of a loudspeaker while the

other is connected to the combined mid and tweeter section. With this

arrangement each amplifier operates over a restricted frequency range. This

restricted range presents each amplifier with a much simpler job and each

amplifier is less likely to influence the sound in some way.

Dolby Digital

Dolby Digital is a digital surround sound system that gives you completely

independent multi-channel audio. With 3 front channels (front L/R and

center), and 2 surround stereo channels, Dolby Digital provides 5 full-range

audio channels. With an additional channel especially for bass effects,

referred to as LFE (Low-Frequency Effect), the system has a total of 5.1-

channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the

surround speakers, more accurate moving sound effects and surround sound

environments are possible than with Dolby Surround. The wide dynamic

range from maximum to minimum volumes that are reproduced by the 5

full-range channels, and the precise sound orientation generated using

digital sound processing provides listeners with unprecedented excitement

and realism. With this unit, any sound environment from monaural up to a

5.1-channel configuration can be freely selected for your enjoyment.

Dolby Pro Logic II

Dolby Pro Logic II is an improved technique used to decode vast numbers

of existing Dolby Surround sources. This new technology enables a discrete

5-channel playback with 2 front left and right channels, 1 center channel,

and 2 surround left and right channels, instead of only 1 surround channel

for conventional Pro Logic technology. There are three modes available:

“Music mode” for music sources, “Movie mode” for movie sources, and

“Game mode” for game sources.

Dolby Pro Logic IIx

Dolby Pro Logic IIx is a new technology enabling discrete multichannel

playback from 2-channel or multi-channel sources. There are three modes

available: “Music mode” for music sources, “Movie mode” for movie

sources (for 2-channel sources only) and “Game mode” for game sources.

Dolby Surround

Dolby Surround uses a 4-channel analog recording system to reproduce

realistic and dynamic sound effects: 2 front left and right channels (stereo),

a center channel for dialog (monaural), and a surround channel for special

sound effects (monaural). The surround channel reproduces sound within a

narrow frequency range. Dolby Surround is widely used with nearly all

video tapes and laser discs, as well as in many TV and cable broadcasts.

The Dolby Pro Logic decoder built into this unit employs a digital signal

processing system that automatically stabilizes the volume on each channel

to enhance moving sound effects and directionality.

Dolby TrueHD

Dolby TrueHD is an advanced lossless audio technology developed for

high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience. Supporting bitrates up to 18.0 Mbps, Dolby

TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio

simultaneously. Dolby TrueHD also remains fully compatible with the

existing multichannel audio systems and retains the metadata capability of

Dolby Digital, allowing dialog normalization and dynamic range control.

DTS 96/24

DTS 96/24 offers an unprecedented level of audio quality for multichannel

sound on DVD video, and is fully backward-compatible with all DTS

decoders. “96” refers to a 96 kHz sampling rate compared to the typical

48 kHz sampling rate. “24” refers to 24-bit word length. DTS 96/24 offers

sound quality transparent to the original 96/24 master, and 96/24 5.1-

channel sound with full-quality full-motion video for music programs and

motion picture soundtracks on DVD video.

DTS Digital Surround

DTS Digital Surround was developed to replace the analog soundtracks of

movies with a 5.1-channel digital sound track, and is now rapidly gaining

popularity in movie theaters around the world. DTS, Inc. has developed a

home theater system so that you can enjoy the depth of sound and natural

spatial representation of DTS Digital Surround in your home. This system

produces practically distortion-free 5.1-channel sound (technically, left,

right and center channels, 2 surround channels, plus an LFE 0.1 channel as

a subwoofer, for a total of 5.1-channels).

DTS Express

This is an audio format for next-generation optical discs such as Blu-ray

discs. It uses optimized low bit rate signals for network streaming. In the

case of a Blu-ray disc, this format is used with secondary audio, enabling

you to enjoy the commentary of the movie producer via the Internet while

playing the main program.

DTS-HD High Resolution Audio

DTS-HD High Resolution Audio is a high resolution audio technology

developed for high-definition disc-based media including Blu-ray Disc.

Selected as an optional audio standard for Blu-ray Disc, this technology

delivers sound that is virtually indistinguishable from the original, offering

a high-definition home theater experience.

Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTS-HD High

Resolution Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz

audio simultaneously.

DTS-HD High Resolution Audio also remains fully compatible with the

existing multichannel audio systems that incorporate DTS Digital

Surround.

DTS-HD Master Audio

DTS-HD Master Audio is an advanced lossless audio technology developed

for high-definition disc-based media including Blu-ray Disc. Selected as an

optional audio standard for Blu-ray Disc, this technology delivers sound

that is bit-for-bit identical to the studio master, offering a high-definition

home theater experience.

Supporting bitrates up to 24.5 Mbps for Blu-ray Disc, DTS-HD Master

Audio can carry up to 7.1 discrete channels of 24-bit/96 kHz audio

simultaneously. Supported by HDMI version 1.3 and designed for the

optical disc players and AV receivers/amplifiers of the future, DTS-HD

Master Audio also remains fully compatible with the existing multichannel

audio systems that incorporate DTS Digital Surround.

Glossary

En 78

APPENDIX

Glossary

DSD

Direct Stream Digital (DSD) technology stores audio signals on digital

storage media, such as Super Audio CDs. Using DSD, signals are stored as

single bit values at a high-frequency sampling rate of 2.8224 MHz, while

noise shaping and oversampling are used to reduce distortion, a common

occurrence with very high quantization of audio signals. Due to the high

sampling rate, better audio quality can be achieved than that offered by the

PCM format used for normal audio CDs. The frequency is equal to or

higher than 100 kHz, with a dynamic range of 120 dB. This unit can

transmit or receive DSD signals via the HDMI jack.

LFE 0.1 channel

This channel reproduces low-frequency bass signals, and has a frequency

range from 20 Hz to 120 Hz. This channel is counted as 0.1, because it only

enforces a low-frequency range compared to the full-range reproduced by

the other 5-channels in Dolby Digital or DTS 5.1-channel systems.

Neo:6

Neo:6 decodes the conventional 2-channel sources for 6-channel playback

by the specific decoder. It enables playback with the full-range channels

with higher separation just like digital discrete signal playback. There are

two modes available: “Music mode” for music sources and “Cinema mode”

for movie sources.

PCM (Linear PCM)

Linear PCM is a signal format under which an analog audio signal is

digitized, recorded and transmitted without using any compression. This is

used as a method of recording CDs and DVD audio. The PCM system uses

a technique for sampling the size of the analog signal per very small unit of

time. Standing for “Pulse Code Modulation,” the analog signal is encoded

as pulses and then modulated for recording.

Sampling frequency and number of quantized bits

When digitizing an analog audio signal, the number of times the signal is

sampled per second is called the sampling frequency, while the degree of

accuracy when converting the sound level into a numeric value is called the

number of quantized bits. The range of rates that can be played back is

determined based on the sampling rate, whereas the dynamic range

representing the sound level difference is determined by the number of

quantized bits. In principle, the higher the sampling frequency, the wider

the range of frequencies that can be played back, and the higher the number

of quantized bits, the more accurately the sound level can be reproduced.

Sound field program information

CINEMA DSP

Since the Dolby Surround and DTS systems were originally designed for

use in movie theaters, their effect is best felt in a theater having many

speakers designed for acoustic effects. Since home conditions, such as

room size, wall material, number of speakers, and so on, can differ so

widely, it is inevitable that there are differences in the sound that is heard.

Based on a wealth of actually measured data, Yamaha CINEMA DSP uses

Yamaha’s original DSP technology to combine Dolby Pro Logic, Dolby

Digital, and DTS systems to provide the audiovisual experience of a movie

theater in the listening room of your own home.

Compressed music enhancer

The Compressed music enhancer feature of this unit enhances your

listening experience by regenerating the missing harmonics in compression

artifacts. As a result, it compensates for flattened complexity due to the loss

of high-frequency fidelity as well as lack of bass due to the loss of low-

frequency bass, providing improved performance for the overall sound

system.

SILENT CINEMA

Yamaha has developed a natural, realistic sound effect DSP algorithm for

headphones. Parameters for headphones have been set for each sound field

program, so that accurate representations of all the sound field programs

can be enjoyed on headphones.

Virtual CINEMA DSP

Yamaha has developed a Virtual CINEMA DSP algorithm that allows you

to enjoy DSP surround effects even without any surround speakers, by

using virtual surround speakers. It is even possible to enjoy Virtual

CINEMA DSP using a minimal two-speaker system that does not include a

center speaker.

Video information

Component video signal

With the component video signal system, the video signal is separated into

the Y signal for luminance and the P

B and PR signals for chrominance.

Color can be reproduced more faithfully with this system because each of

these signals is independent. The component signal is also called the “color

difference signal” because the luminance signal is subtracted from the color

signal. A monitor with component input jacks is required in order to output

component signals.

Composite video signal

With the composite video signal system, the video signal comprises the

three basic elements of a video picture: color, brightness and

synchronization data. A composite video jack on a video component

transmits these three elements combined.

Deep Color

Deep Color refers to the use of various color depths in displays, up from the

24-bit depths in previous versions of the HDMI specification. This extra bit

depth allows HDTVs and other displays increase from millions of colors to

billions of colors and eliminate on-screen color banding for smooth tonal

transitions and subtle gradations between colors. The increased contrast

ratio can represent many times more shades of gray between black and

white. Additionally, Deep Color increases the number of available colors

within the boundaries defined by the RGB or YCbCr color space.

HDMI

HDMI (High-Definition Multimedia Interface) is the first industry

supported, uncompressed, all-digital audio/video interface. Providing an

interface between any sources (such as set-top boxes or AV receivers) and

audio/video monitors (such as digital televisions), HDMI supports

standard, enhanced or high-definition video as well as multichannel digital

audio using a single cable. HDMI transmits all ATSC HDTV standards and

supports 8-channel digital audio, with bandwidth to spare to accommodate

future enhancements and requirements.

When used in combination with HDCP (High-bandwidth Digital Content

Protection), HDMI provides a secure audio/video interface that meets the

security requirements of content providers and system operators. For

further information on HDMI, visit the HDMI website at “http://

www.hdmi.org/.”

S-video signal

With the S-video signal system, the video signal normally transmitted using

a pin cable is separated and transmitted as the Y signal for the luminance

and the C signal for the Cameroonians through the S-video cable. Using the

S VIDEO jack eliminates video signal transmission loss and allows

recording and playback of even more beautiful images.

“x.v.Color”

A color space standard supported by HDMI version 1.3. It is a more

extensive color space than sRGB, and allows the expression of colors that

were not hitherto possible. While remaining compatible with the color

gamut of sRGB standards, “x.v.Color” expands the color space, and can

thus produce more vivid, natural images. It is particularly effective for still

pictures and computer graphics.

En 79

APPENDIX

■ HDMI signal compatibility

Audio signals

• If the input source component can decode the bitstream audio signals of audio commentaries, you can playback the audio

sources with the audio commentaries mixed down by using the digital audio input (optical or coaxial) connections.

• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.

Video signals

This unit is compatible with the video signals of the following resolutions:

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent No’s:

5,451,942;5,956,674;5,974,380;5,978,762;6,226,616;6,487,535 & other U.S. and worldwide patents

issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD

iPod™, iPhone™

“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries. “iPhone” is a trademark

of Apple Inc.

Bluetooth™

Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a

license agreement.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered

trademarks of HDMI Licensing LLC.

“SILENT CINEMA” is a trademark of Yamaha Corporation.

Information on HDMI™

Audio signal types Audio signal formats Compatible media

2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc.

Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD,

etc.

DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc.

Bitstream Dolby Digital, DTS DVD-Video, etc.

Bitstream (High definition audio) Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio, DTS-HD

High Resolution Audio, DTS Express

Blu-ray Disc, HD DVD, etc.

NOTES

• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output,

depending on the type of the DVD player.

• This unit is not compatible with HDCP-incompatible HDMI or DVI components.

• Refer to the supplied instruction manuals for details.

To decode audio bitstream signals on this unit, set the input source component appropriately so that the

component outputs the bitstream audio signals directly (does not decode the bitstream signals on the

component).

• This unit is not compatible with the audio commentary features (for example, the special audio contents

downloaded via Internet) of Blu-ray Disc or HD DVD. This unit does not playback the audio

commentaries of the Blu-ray Disc or HD DVD content.

– 480i/60 Hz

– 576i/50 Hz

– 480p/60 Hz

– 576p/50 Hz

– 720p/60 Hz, 50 Hz

– 1080i/60 Hz, 50 Hz

– 1080p/60 Hz, 50 Hz, 24 Hz

About trademarks

En 80

APPENDIX

■ Input jacks

• Analog audio

Audio x 5 (AV5, AV6, AUDIO1, AUDIO2, V-AUX)

• Digital audio

Optical x 2 (AV1, AV4)

Coaxial x 2 (AV2, AV3)

•Video

Composite x 5 (AV3, AV4, AV5, AV6, V-AUX)

S-Video x 1 (AV5) [U.K. and Europe models]

Component x 2 (AV1, AV2)

•Other

HDMI x 4

DOCK x 1 (AUDIO, VIDEO [Composite])

■ Output jacks

• Analog Audio

Speaker out x 7ch (FRONT L/R, CENTER,

SURROUND L/R, SURROUND BACK L/R

)

*1 Note: assignment is possible. [SURROUND BACK, BI-AMP (FRONT L/R)]

Subwoofer out x 1

AV O U T x 1

AUDIO OUT x 1

•Video

MONITOR OUT

- Component x 1

- Composite x 1

AV O U T

- Composite x 1

•Other

HDMI OUT x 1

■ HDMI

• HDMI Specification: Deep Color, “x.v.Color,” Auto Lips Sync,

ARC (Audio Return Channel)

• Video Format (Repeater Mode)

- VGA

- 480i/60 Hz

- 576i/50 Hz

- 480p/60 Hz

- 576p/50 Hz

- 720p/60 Hz, 50 Hz

- 1080i/60 Hz, 50 Hz

- 1080p/60 Hz, 50 Hz, 24 Hz

• Analog up Conversion

- 480i/60 Hz (NTSC)

- 576i/50 Hz (PAL)

- 480p/60 Hz

- 576p/50 Hz

- 720p/60 Hz, 50 Hz

- 1080i/60 Hz, 50 Hz

• Up-Scaling

- 480i → 480p/720p/1080i/1080p

- 480p → 720p/1080i/1080p

- 576i → 576p/720p/1080i/1080p

- 576p → 720p/1080i/1080p

•Audio Format

- Dolby Digital

- DTS

- DSD 6ch

- Dolby Digital Plus

- Dolby TrueHD

- DTS-HD

- PCM 2ch-8ch (Max 192 kHz/24 bit)

• Content Protection: HDCP compatible

■ Compatible Decoding Formats

• Decoding Format

- Dolby True HD, Dolby Digital Plus

- DTS-HD Master Audio, DTS-HD High Resolution, DTS Express

- Dolby Digital, Dolby Digital EX

- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1

• Post Decoding Format

- Dolby Pro Logic

- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,

Dolby Pro Logic II Game

- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,

Dolby Pro Logic IIx Game

- DTS Neo:6 Music, DTS Neo:6 Cinema

■ AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

[U.S.A. and Canada models]

(1 kHz, 0.9% THD, 8 Ω)

FRONT L/R ......................................................................... 90 W/ch

CENTER................................................................................... 90 W

SURROUND L/R ................................................................ 90 W/ch

SURROUND BACK L/R .................................................... 90 W/ch

[Other models]

(1 kHz, 0.9% THD, 6 Ω)

FRONT L/R ......................................................................... 90 W/ch

CENTER................................................................................... 90 W

SURROUND L/R ................................................................ 90 W/ch

SURROUND BACK L/R .................................................... 90 W/ch

• Dynamic Power (IHF)

[U.S.A. and Canada models]

Front Speakers 8/6/4/2 Ω .....................................95/110/130/150 W

[Other models]

Front Speakers 6/4/2 Ω .............................................100/110/125 W

• Maximum Useful Output Power (JEITA)

[China, Korea, General and Asia models]

1 kHz, 10% THD, 6 Ω ............................................................115 W

• Maximum Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4 Ω ...........................................................105 W

• IEC Output Power [U.K., Europe and Asia models]

Front Speakers 1 kHz, 0.9% THD, 8 Ω .........................90 W+90 W

Specifications

En 81

APPENDIX

• Dynamic Headroom [U.S.A. and Canada models]

8 Ω ........................................................................................ 0.23 dB

• Input Sensitivity/Input Impedance

AV5, etc .....................................................................200 mV/47 kΩ

• Maximum Input Voltage

AV5, etc. (1 kHz, 0.5% THD) .................................... 2.0 V or more

• Rated Output Voltage/Output Impedance

AUDIO OUT ............................................................200 mV/1.2 kΩ

SUBWOOFER (2ch Stereo & Front: Small)................1.0 V/1.2 kΩ

• Headphone Jack Rated Output/Impedance

AV5, etc. (1 kHz, 50 mV, 8 Ω) ..................................100 mV/470 Ω

• Frequency Response

AV5 to FRONT ..................................... 10 Hz to 100 kHz, +0/-3 dB

• Total Harmonic Distortion

AV5, etc. to FRONT (DIRECT)

[U.S.A. and Canada models] (1 kHz, 50 W, 8 Ω) ....... 0.06% or less

[Other models] (1 kHz, 50 W, 6 Ω)............................. 0.06% or less

• Signal to Noise Ratio (IHF-A Network)

AV5, etc. (DIRECT) Input Shorted (250 mV to Front Speakers)

...............................................................................100 dB or more

• Residual Noise (IHF-A Network)

Front Speakers ............................................................150 µV or less

• Channel Separation (1 kHz/10 kHz)

AV5, etc. (5.1 kΩ shortened) ........................... 60 dB/45 dB or more

• Volume Control ...................................... MUTE / -80 dB to +16.5 dB

• Tone Control (Front Speakers)

BASS Boost/Cut .............................................±10 dB/2 dB at 50 Hz

BASS Turnover Frequency.................................................... 350 Hz

TREBLE Boost/Cut......................................±10 dB/2 dB at 20 kHz

TREBLE Turnover Frequency.............................................. 3.5 kHz

• Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz)

H.P.F. (Front, Center, Surround, Surround Back)............. 12 dB/oct.

L.P.F. (Subwoofer)............................................................ 24 dB/oct.

■ VIDEO SECTION

• Video Signal Type

[U.S.A., Canada, Korea and General models] ........................ NTSC

[Other models] ........................................................................... PAL

• Video Conversion...............................................................NTSC/PAL

• Signal Level

Composite ..................................................................... 1 Vp-p/75 Ω

S-Video [U.K. and Europe models]

..........................................1 Vp-p/75 Ω (Y), 0.286 Vp-p/75 Ω (C)

Component ...................... 1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (P

B/PR)

• Maximum Input Level (Video Conversion Off) .......1.5 Vp-p or more

• Signal to Noise Ratio .................................................... 50 dB or more

• Frequency Response [MONITOR OUT]

Component (Video Conversion Off) ............ 5 Hz to 60 MHz, -3 dB

■ FM SECTION

• Tuning Range

[U.S.A. and Canada models]............................... 87.5 to 107.9 MHz

[Asia and General models]............87.5/87.50 to 108.0/108.00 MHz

[Other models] ................................................ 87.50 to 108.00 MHz

• 50 dB Quieting Sensitivity (IHF)

Mono .....................................................................3.0 µV (20.8 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo.................................................................. 74 dB/69 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo........................................................................0.3/0.3%

• Antenna Input (unbalanced)......................................................... 75 Ω

■ AM SECTION

• Tuning Range

[U.S.A. and Canada models] .................................. 530 to 1710 kHz

[Asia and General models] .....................530/531 to 1710/1611 kHz

[Other models] ........................................................531 to 1611 kHz

■ GENERAL

• Power Supply

[U.S.A. and Canada models] ................................. AC 120 V, 60 Hz

[General models] ................. AC 110/120/220/230-240 V, 50/60 Hz

[China model] ........................................................ AC 220 V, 50 Hz

[Korea model] ........................................................ AC 220 V, 60 Hz

[Australia model] ................................................... AC 240 V, 50 Hz

[U.K. and Europe models]..................................... AC 230 V, 50 Hz

[Asia models]......................................AC 220/230-240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models] .....................................270 W/320 VA

[Other models] ........................................................................280 W

• Standby Power Consumption

HDMI Control off / Standby Through off ....................0.2 W or less

HDMI Control on / Standby Through off.....................1.2 W or less

HDMI Control on/ Standby Through on..........................3 W or less

• Dimensions (W x H x D)

435 x 151 x 364 mm (17-1/8 x 6 x 14-3/8 in)

• Weight

8.5 kg (18.7 lbs)

* Specifications are subject to change without notice.

En 82

APPENDIX

Numerics

5.1-channel speaker connection ................................................... 11

5.1-channel speaker layout........................................................... 10

6.1-channel speaker connection ................................................... 11

6.1-channel speaker layout........................................................... 10

7.1-channel speaker connection ................................................... 11

7.1-channel speaker layout........................................................... 10

Adaptive DRC, Sound Setup ....................................................... 54

Advanced Setup menu ................................................................. 66

AM antenna connection ............................................................... 23

AM tuning .................................................................................... 35

Aspect, HDMI Setup.................................................................... 57

Audio In, Option menu ................................................................ 47

AUDIO jack ................................................................................. 14

Audio Output, HDMI Setup......................................................... 57

Audio Return Channel function ................................................... 70

AudioReturnChan, HDMI Setup ................................................. 56

Auto Preset................................................................................... 36

Auto Preset, Option menu............................................................ 48

Automatic traffic information reception ...................................... 39

AutoPowerDown, Function Setup ............................................... 59

BD player connection .................................................................. 18

Bi-amp connection, speaker......................................................... 13

BI-AMP, Advanced Setup menu ................................................. 67

Bluetooth™ component playback................................................ 43

Cable plug .................................................................................... 14

Center speaker................................................................................ 9

Changing speaker impedance ...................................................... 12

CINEMA DSP indicator ................................................................ 7

Clear Preset, Option menu ........................................................... 48

COAXIAL jack ............................................................................ 14

COMPONENT VIDEO jack........................................................ 14

Config, Speaker Setup................................................................. 50

Connect, Option menu ................................................................ 48

Connecting speakers.................................................................... 11

Connections................................................................................... 9

Control, HDMI Setup.................................................................. 56

Cursor indicators ........................................................................... 7

Decoder Mode, Option menu...................................................... 46

Dimmer, Function Setup ............................................................. 59

Direct mode ................................................................................. 32

Disconnect, Option menu............................................................ 48

Distance, Speaker Setup.............................................................. 52

DSP Parameter ............................................................................ 60

DVD player connection............................................................... 18

Dynamic Range, Sound Setup..................................................... 55

Equalizer, Speaker Setup ............................................................ 52

Extended Surround, Option menu............................................... 46

External component connection.................................................. 14

FM antenna connection ............................................................... 23

FM Mode, Option menu.............................................................. 48

FM tuning.................................................................................... 35

Front panel .................................................................................... 5

Front panel display ........................................................................ 7

Front speaker................................................................................. 9

Function Setup ............................................................................ 58

HDMI Control function............................................................... 68

HDMI indicator............................................................................. 7

HDMI jack .................................................................................. 14

HDMI Setup ................................................................................ 55

High-frequency sound adjustment .............................................. 29

INIT, Advanced Setup menu....................................................... 67

Init.Volume, Sound Setup ........................................................... 55

Input Rename, Function Setup .................................................... 58

iPhone™ playback ...................................................................... 40

iPod™ playback .......................................................................... 40

Jack.............................................................................................. 14

Level, Speaker Setup................................................................... 52

Lipsync, Sound Setup.................................................................. 54

Low-frequency sound adjustment ............................................... 29

Manual Preset .............................................................................. 37

Max Volume, Sound Setup ......................................................... 55

Memory Guard ............................................................................ 59

Menu browse mode ..................................................................... 41

MON.CHK, Advanced Setup menu ............................................ 67

Multi information display.............................................................. 7

MUTE indicator ............................................................................ 7

Normal tuning.............................................................................. 35

OPTICAL jack ............................................................................ 14

Option menu ................................................................................ 45

OSD Shift, Function Setup.......................................................... 59

Pairing, Option menu .................................................................. 48

PHONES jack................................................................................ 5

Portable audio player connection ................................................ 22

PORTABLE jack......................................................................... 14

Index

En 83

APPENDIX

Index

Preset tuning................................................................................. 36

Radio Data System tuning ........................................................... 38

Rear panel ...................................................................................... 6

Remote control............................................................................... 8

Remote control battery installation ................................................ 4

Remote control, Controlling other components........................... 63

REMOTE ID, Advanced Setup menu.......................................... 66

Repeat playback, iPod/iPhone ..................................................... 42

Repeat, Option menu ................................................................... 48

Resolution, HDMI Setup ............................................................. 57

S VIDEO jack .............................................................................. 14

SCENE function........................................................................... 30

Setup menu................................................................................... 49

Shuffle playback, iPod/iPhone..................................................... 42

Shuffle, Option menu................................................................... 48

Signal Info, Option menu............................................................. 47

Simple play mode ........................................................................ 41

Sound field program .................................................................... 30

Sound field program parameter setting........................................ 60

Sound Setup ................................................................................. 54

SP IMP., Advanced Setup menu.................................................. 66

Speaker connection ........................................................................ 9

Speaker indicators.......................................................................... 7

Speaker layout.............................................................................. 10

Speaker setting ............................................................................. 24

Speaker Setup............................................................................... 50

Standby Charge, Option menu..................................................... 48

Standby Through, HDMI Setup................................................... 56

Straight decoding mode ............................................................... 31

Subwoofer ...................................................................................... 9

Supplied accessories ...................................................................... 4

Surround back speaker................................................................... 9

Surround speaker ........................................................................... 9

Test Tone, Speaker Setup ............................................................ 53

Tone control ................................................................................ 29

TrafficProgram, Option menu..................................................... 48

TU, Advanced Setup menu ......................................................... 67

Tuner indicator .............................................................................. 7

TV Audio In, HDMI Setup ......................................................... 56

TV monitor connection ............................................................... 15

VIDEO AUX input cover.............................................................. 4

Video cameras connection .......................................................... 22

Video conversion ........................................................................ 57

VIDEO jack................................................................................. 14

VOLTAGE SELECTOR............................................................... 6

VOLUME...................................................................................... 5

VOLUME indicator ...................................................................... 7

Volume Trim, Option menu........................................................ 46

YPAO.......................................................................................... 24

YC507B0/OMEN

Yamaha HTR-5063 El manual del propietario

Marca: Yamaha

Modelo: HTR-5063

Categoría: Receptores AV

Tipo: El manual del propietario

Descargar PDF

informe

en otros idiomas

English: Yamaha HTR-5063 Owner's manual
português: Yamaha HTR-5063 Manual do proprietário
Türkçe: Yamaha HTR-5063 El kitabı
suomi: Yamaha HTR-5063 Omistajan opas
română: Yamaha HTR-5063 Manualul proprietarului

Yamaha HTR-5063 El manual del propietario

Yamaha HTR-5063 El manual del propietario

en otros idiomas

Artículos relacionados

Otros documentos