1
Installation Instructions for
Fiona Pendant
1.0
P1487-P1489
Pendant
P1487, P1489
1
2
1A
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
NOTE: The hang straight or swivel may be substituted for the chain link for use with vaulted ceilings.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliant junctionNEC
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
STEM ASSEMBLY
FIXTURE
2
LAMP
HANG STRAIGHT
CHAIN LINK