Panasonic KX-TGEA61 Instrucciones de operación

Tipo
Instrucciones de operación

Este manual también es adecuado para

Installation Manual
Additional Digital Cordless Handset
Model No. KX-TGLA40
Thank you for purchasing a Panasonic product.
This unit is an additional handset compatible with the following series of
Panasonic Digital Cordless Phone:
KX-TGL430/KX-TGL460
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This
installation manual describes only the steps needed to register and begin using
the handset. Please read the base unit’s operating instructions for further details.
Please read this installation manual before using the unit and save it for future
reference.
For assistance, visit our Web site: http://shop.panasonic.com/support
for customers in the U.S.A.
Printed in Vietnam
PNQX7767ZA
TT1115WK0
Accessory information
Supplied accessories
Accessory item/Part number Quantity
Charger
*1
1
Rechargeable batteries/HHR-4DPA 2
Handset cover
*2,
*3
1
*1 PNLC1070ZB (Black), PNLC1070ZS (Silver)
*2 The handset cover comes attached to the handset.
*3 PNYNTGLA40BR (Black), PNYNTGLA40SR (White)
Note:
R Please read the base unit’s operating instructions for additional/replacement
accessories.
For your safety
To prevent severe injury and loss of life/property, read this section carefully before
using the product to ensure proper and safe operation of your product.
WARNING
Power connection
R Completely insert the AC adaptor/power plug into the power outlet. Failure to do
so may cause electric shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it
from the power outlet, then wiping with a dry cloth. Accumulated dust may cause
an insulation defect from moisture, etc. resulting in a fire.
R Unplug the product from power outlets if it emits smoke, an abnormal smell, or
makes an unusual noise. These conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and contact us at
http://shop.panasonic.com/support
Installation
R To prevent the risk of fire or electrical shock, do not expose the product to rain
or any type of moisture.
2
For assistance, please visit http://shop.panasonic.com/support
Installation
R Do not place or use this product near automatically controlled devices such as
automatic doors and fire alarms. Radio waves emitted from this product may
cause such devices to malfunction resulting in an accident.
CAUTION
Installation and location
R The AC adaptor is used as the main disconnect device. Ensure that the AC
outlet is installed near the product and is easily accessible.
Battery
R We recommend using the supplied batteries or additional/replacement batteries
noted on page 2 for replacement battery information. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries. Released electrolyte from the batteries is
corrosive and may cause burns or injury to the eyes or skin. The electrolyte is
toxic and may be harmful if swallowed.
R Exercise care when handling the batteries. Do not allow conductive materials
such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit
may cause the batteries and/or the conductive material to overheat and cause
burns.
R Charge the batteries provided with or identified for use with this product only, in
accordance with the instructions and limitations specified in this manual.
R Only use a compatible base unit (or charger) to charge the batteries. Do not
tamper with the base unit (or charger). Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how
to recycle this battery.
Important safety instructions
When using your product, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
For assistance, please visit http://shop.panasonic.com/support
3
Installation
1. Do not use this product near water for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Do not use the telephone to report a gas leak in the vicinity of the leak.
3. Use only the power cord and batteries indicated in this manual. Do not dispose
of batteries in a fire. They may explode. Check with local codes for possible
special disposal instructions.
SAVE THESE INSTRUCTIONS
Other information
R Operating the product near electrical appliances may cause interference. Move
away from the electrical appliances.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Routine care
R Wipe the outer surface of the product with a soft moist cloth.
R Do not use benzine, thinner, or any abrasive powder.
Notice for product disposal, transfer, or return
R This product can store your private/confidential information. To protect your
privacy/confidentiality, we recommend that you erase information such as
phonebook or caller list entries from the memory before you dispose of, transfer,
or return the product.
Setting up
Connections/Wall mounting
Connect the AC adaptor to the power outlet.
Drive the screws (
1
) (not supplied) into the wall, if necessary.
2
27.2 mm (1
1
/16 inches)
2
1
2
1
4
For assistance, please visit http://shop.panasonic.com/support
Installation
Note:
R The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to support the
weight of the unit.
Battery installation/Battery charging
Important:
R Use the supplied rechargeable batteries. For replacement, we recommend using
the Panasonic rechargeable batteries noted on page 2.
R USE ONLY rechargeable Ni-MH batteries AAA (R03) size (
1
).
R Do NOT use alkaline/manganese/Ni-Cd batteries.
R Confirm correct polarities (
, ).
Charge for about 7 hours.
R Confirm Charging is displayed (
2
).
R When the batteries are fully charged, Fully charged is displayed.
1
2
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends ( , ) and the charge contacts with a dry cloth and
charge again.
Registering a handset to a base unit
1 Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
then repeat this step.
2 Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and is displayed.
For assistance, please visit http://shop.panasonic.com/support
5
Installation
Note:
R If an error tone sounds, or if is displayed, register the handset according to
the base unit’s operating instructions.
Display language
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN a MOFFN
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately shielded from external RF (radio frequency)
energy. If noise occurs, use an optional headset accessory or the speakerphone
option (if applicable) when using this phone. Consult with your audiologist or
Hearing Aid manufacturer about the availability of Hearing Aids which provide
adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in the off-peak hours, such as early morning or late
evenings.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this device.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
6
For assistance, please visit http://shop.panasonic.com/support
Installation
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:
R This product complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
R This handset may not be collocated or operated in conjunction with any other
antenna or transmitter.
R For body-worn operation, the handset must be used only with a non-metallic
accessory. Use of other accessories may not ensure compliance with FCC RF
exposure requirements.
Notice:
R FCC ID can be found inside the battery compartment or on the bottom of the
unit.
Compliance with TIA-1083 standard
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephone handsets identified with this logo have reduced
noise and interference when used with T-Coil equipped
hearing aids and cochlear implants.
For assistance, please visit http://shop.panasonic.com/support
7
Installation
Notice:
LThis product is designed for use in the United States of America. Sale or use
of this product in other countries may violate local laws.
LCet appareil est conçu pour être utilisé aux États-Unis d’Amérique. La vente
ou l’emploi de cet appareil dans certains autres pays peut constituer une
infraction à la législation locale.
LEste producto está diseñado para usarse en los Estados Unidos de América.
La venta o el empleo de este producto en ciertos países puede constituir
violación de la legislación local.
Lҏ౰ࠢட࣏छ୽ٺҢՄ೩Ȅषӵڏт୽ড়᎛୵ܖٺҢȂџ૖ོႂІ࿋ӴݲٽȄ
Lߎߩ⵾ຠߪޔᣣᧄ࿖ᄖߢߩ૶↪ࠍ⋡⊛ߣߒߡ⸳⸘ߐࠇߡ߅ࠅޔᣣᧄ࿖ౝߢߩ
૶↪ߪᴺᓞ㆑෻ߣߥࠅ߹ߔޕᓥߞߡޔᒰ␠ߢߪᣣᧄ࿖ౝߦ߅޿ߡߪේೣߣߒ
ߡୃℂߥߤߩࠨ࡯ࡆࠬߪ⥌ߒ߆ߨ߹ߔޕ
8
For assistance, please visit http://shop.panasonic.com/support
Installation
Customer services
For assistance, please visit http://shop.panasonic.com/support
9
Appendix
Limited Warranty (ONLY FOR U.S.A.)
10
For assistance, please visit http://shop.panasonic.com/support
Appendix
For assistance, please visit http://shop.panasonic.com/support
11
Appendix
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the base unit’s
Operating Instructions.
IMPORTANT!
If your product is not working properly. . .
Visit our Web site: http://shop.panasonic.com/support
LFAQ and troubleshooting hints are available.
Two Riverfront Plaza, Newark, NJ 07102-5490
© Panasonic System Networks Co., Ltd. 2015
12
For assistance, please visit http://shop.panasonic.com/support
Appendix
Manual de instalación
Auricular Inalámbrico Digital Adicional
Modelo n° KX-TGLA40
Gracias por adquirir un producto Panasonic.
Esta unidad es un auricular adicional compatible con la siguiente serie de teléfonos ina-
lámbricos digitales Panasonic:
KX-TGL430/KX-TGL460
(Los modelos correspondientes están sujetos a cambio sin previo aviso.)
Debe registrar este auricular en su unidad base antes de poder usarlo. Este manual de
instalación solo describe los pasos necesarios para registrar y comenzar a usar el auri-
cular. Lea las instrucciones de operación de la unidad base para obtener más detalles.
Lea este manual de instalación antes de usar la unidad y guárdelo para consultarlo en el
futuro.
Para obtener ayuda, visite nuestro sitio web: http://shop.panasonic.com/support
para clientes en los EE. UU. (solo en inglés).
TGLA40(es-es)_1111_ver021.pdf 1 2015/11/11 17:57:15
Información de los accesorios
Accesorios que se suministran
Accesorio/Pieza número Cantidad
Cargador
*1
1
Baterías recargables/HHR-4DPA 2
Cubierta del auricular
*2,
*3
1
*1 PNLC1070ZB (negro), PNLC1070ZS (plateado)
*2 La tapa del auricular viene unida a él.
*3 PNYNTGLA40BR (negro), PNYNTGLA40SR (blanco)
Nota:
R Lea las instrucciones de operación de la unidad base para obtener información sobre
accesorios adicionales o de repuesto.
Instalación
Conexiones/Montaje en la pared
Conecte el adaptador de corriente a la toma de corriente.
Si lo requiere, inserte los tornillos (
1
) (no se suministran) en la pared.
2
27.2 mm (1
1
/16 pulgadas)
2
1
2
1
Nota:
R El adaptador de corriente debe permanecer conectado en todo momento (es normal que
el adaptador se caliente durante su uso).
R Asegúrese de que la pared y el método de colocación sean lo suficientemente
resistentes para soportar el peso de la unidad.
2
Instalación
TGLA40(es-es)_1111_ver021.pdf 2 2015/11/11 17:57:15
Instalación y carga de la batería
Importante:
R Utilice las baterías recargables que se suministran. Para reemplazarlas, recomendamos
el uso de las baterías recargables Panasonic que se especifican en la página 2.
R USE SOLO baterías Ni-MH recargables tamaño AAA (R03) (
1
).
R NO utilice baterías alcalinas, de manganeso ni de Ni-Cd.
R Confirme que las polaridades estén correctas (
, ).
Cargue aproximadamente durante 7 horas.
R Confirme que se muestre Cargando (
2
).
R Una vez que las baterías están completamente cargadas, aparece Carg. Comp..
1
2
Nota:
R Si las baterías están completamente cargadas pero el tiempo de funcionamiento parece
ser más corto, limpie los extremos de las baterías (
, ) y los contactos de carga con
un paño seco y cárguelas de nuevo.
Cómo registrar un auricular a una unidad base
1 Unidad base:
Oprima y mantenga oprimido MLOCATORN durante aproximadamente 5 segundos.
R Si todos los auriculares registrados comienzan a timbrar, oprima MLOCATORN de
nuevo para detenerlos y después repita este paso.
2 Auricular:
Coloque el auricular en la unidad base o cargador, y después espere hasta que suene
un pitido largo y aparezca
.
Nota:
R Si suena un tono de error, o si se muestra
, registre el auricular de acuerdo con las
instrucciones de operación de la unidad base.
3
Instalación
TGLA40(es-es)_1111_ver021.pdf 3 2015/11/11 17:57:15
Idioma de la pantalla
1 MMENUN#110
2 MbN: Seleccione la configuración deseada. a MGUARDARN a MOFFN
4
Instalación
TGLA40(es-es)_1111_ver021.pdf 4 2015/11/11 17:57:15
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Panasonic KX-TGEA61 Instrucciones de operación

Tipo
Instrucciones de operación
Este manual también es adecuado para

en otros idiomas