Transcripción de documentos

/ / DIGITAL MIXING CONSOLE Special Notices • The software and this manual are the exclusive copyrights of Yamaha Corporation. • Use of the software and this manual is governed by the Software Licensing Agreement which the purchaser fully agrees to upon breaking the seal of the software packaging. (Carefully read the agreement at the end of this manual before installing the software.) • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. • Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so may result in irreparable damage to your audio CD player. • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • Future upgrades of application and system software and any changes in specifications and functions will be announced separately. • Specifications and descriptions in this installation guide are for information purposes only. Yamaha Corp. reserves the right to change or modify specifications at any time without prior notice. Since specifications may not be the same in every locale, please check with your Yamaha dealer. • The company names and product names in this installation guide are the trademarks or registered trademarks of their respective companies. * OMS is a trademark of Opcode Systems, Inc. * SmartMedia is a trademark of Toshiba Corporation. Contents Getting Started............................................. 2 Introduction..................................................... CD-ROM Contents ........................................... Windows System Requirements........................ Macintosh System Requirements...................... System Hookup................................................ Configuring Your Yamaha Mixing Console ....... Caution when using a USB connection............. 2 2 4 4 5 5 5 Windows Installation .................................... 5 Adobe Reader .................................................. USB MIDI Driver............................................... Installing Yamaha CBX Driver (DM2000/02R96 only) ................................................................ Installing an Editor ........................................... Installing Studio Manager ................................ Installing Card Filer (DM2000 only).................. 5 5 8 8 8 8 Macintosh Installation .................................. 9 Adobe Reader .................................................. 9 OMS (Open Music System) .............................. 9 USB MIDI Driver.............................................. 10 Installing an Editor .......................................... 11 Installing Studio Manager ............................... 11 Installing Card Filer (DM2000 only)................. 11 Setting Up OMS.............................................. 11 Getting Started............................................ 12 Overview of Studio Manager........................... 12 Starting and setting up Studio Manager.......... 13 Troubleshooting .......................................... 14 SOFTWARE LICENSING AGREEMENT .......... 15 Yamaha Professional Audio web site: http://www.yamahaproaudio.com/ Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 1 FRANÇAIS DIGITAL MIXING CONSOLE ESPAÑOL / DEUTSCH Studio Manager V2 Installationshandbuch Studio Manager V2 Manuel d’installation Studio Manager V2 Guía de Instalación ENGLISH Studio Manager V2 Installation Guide  Getting Started Introduction Yamaha Studio Manager enables you to control your Yamaha mixing console from a Windows or Macintosh computer. This Installation Guide explains how to install Studio Manager and the necessary driver software for Windows and Macintosh computers. For information on how to use Studio Manager and the various editors, refer to the PDF format Studio Manager manual and the manuals for the various editors which are installed on your computer when Studio Manager is installed. Refer to the owner’s manuals for your devices for information on operating the devices. CD-ROM Contents CD-ROM included with the DM2000/02R96 Folder Software Editor1 Description DM2000 Editor for Studio Manager (for Windows 2000/XP). SM_\DM2k_ DM2000 SM_\02R96_ 02R96 Editor1 02R96 Editor for Studio Manager (for Windows 2000/XP). SM_\SM2_ Studio Manager1 Yamaha Studio Manager (for Windows 2000/XP). Mididrv_ Yamaha CBX Driver Yamaha serial driver. Necessary if you are connecting to a serial port on your computer. USBdrv_ Yamaha USB MIDI Driver (Windows 98, Me) USBdrv2k_ Yamaha USB MIDI Driver (Windows 2000, XP) Card_ Card Filer1 Yamaha utility for transferring and managing data stored on the DM2000’s SmartMedia card. Mac OS X \SM_\DM2k_ DM2000 Editor1 DM2000 Editor for Studio Manager (for Mac OS X). Mac OS X \SM_\02R96_ 02R96 Editor1 02R96 Editor for Studio Manager (for Mac OS X). Mac OS X \SM_\SM2_ Studio Manager1 Yamaha Studio Manager (for Mac OS X). Open Music System (OMS) 2.3.81, 2 Opcode driver software for use with MIDI applications on Macintosh computers (Mac OS 9 or earlier). OMS Setup for YAMAHA OMS studio setup files for use with the DM2000 and 02R96 (Mac OS 9 or earlier). Windows Macintosh Mac OS 9\OMS_ Mac OS 9\USBdrv_ YAMAHA USB MIDI Driver Mac OS X\USBdrv_ YAMAHA USB MIDI Driver for OS X Mac OS 9\Card_ Card Filer1 Yamaha USB driver. Necessary if you are connecting to a USB port on your computer. Yamaha USB driver. Necessary if you are connecting to a USB port on your Macintosh computer. Yamaha utility for transferring and managing data stored on the DM2000’s SmartMedia card (Mac OS 9 or earlier). 1. For information on using this software, refer to the PDF manual after installation. 2. This software is not supported by Yamaha. 2 Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  CD-ROM included with the DM1000/01V96 Software Editor1 Description SM_\DM1000_ DM1000 SM_\01V96_ 01V96 Editor1 01V96 Editor for Studio Manager (for Windows 2000/XP). SM_\SM2_ Studio Manager1 Yamaha Studio Manager (for Windows 2000/XP). USBdrv_ Yamaha USB MIDI Driver (Windows 98, Me) USBdrv2k_ Yamaha USB MIDI Driver (Windows 2000, XP) Mac OS X \SM_\DM1000_ DM1000 Editor1 DM1000 Editor for Studio Manager (for Mac OS X). Mac OS X \SM_\01V96_ 01V96 Editor1 01V96 Editor for Studio Manager (for Mac OS X). Mac OS X \SM_\SM2_ Studio Manager1 Yamaha Studio Manager (for Mac OS X). Open Music System (OMS) 2.3.81, 2 Opcode driver software for use with MIDI applications on Macintosh computers (Mac OS 9 or earlier). OMS Setup for YAMAHA OMS studio setup files for use with the DM1000 and 01V96 (Mac OS 9 or earlier). Windows Macintosh Mac OS 9\OMS_ Mac OS 9\USBdrv_ YAMAHA USB MIDI Driver Mac OS X\USBdrv_ YAMAHA USB MIDI Driver for OS X DM1000 Editor for Studio Manager (for Windows 2000/XP). Yamaha USB driver. Necessary if you are connecting to a USB port on your computer. Yamaha USB driver. Necessary if you are connecting to a USB port on your Macintosh computer. 1. For information on using this software, refer to the PDF manual after installation. 2. This software is not supported by Yamaha. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 3 ENGLISH Folder  Windows System Requirements Macintosh System Requirements The system requirements of your operating system may differ from those listed here. The system requirements of your operating system may be different to those listed here. Studio Manager Studio Manager Computer A computer with a 800 MHz or faster Intel Pentium or Celeron family processor OS Windows 2000, XP Home Edition, XP Professional Memory Computer A Macintosh G4 or better and a USB port OS Mac OS X 10.2 or later Memory 512 MB or more of free memory 256 MB or more Hard Disk 30 MB or more of free space Hard Disk 30 MB or more of free space Display MIDI Driver USB, MIDI, Serial, or mLAN (depending on the connection between the console and the computer) 1024 x 768 pixels, 256 colors or higher 1280 x 1024, 32,000 colors recommended MIDI Driver Display 1024 x 768 pixels, 256 colors or higher 1280 x 1024, High Color 16-bit recommended (If you use display settings of 1024 x 768, turn on the Task Bar’s Auto-hide option.) USB, MIDI, Serial, or mLAN (depending on the connection between the console and the computer) Card Filer (DM2000 only) Card Filer (DM2000 only) Computer A Macintosh computer with a PowerPC processor or better OS Mac OS 7.5 to 9.2.2 (Mac OS X not supported) 8 MB or more of free memory Computer A computer with a 100 MHz or faster Intel Pentium or Celeron family processor Memory Hard Disk 6 MB or more OS Windows 95, 98, 98SE, Me, NT4.0, 2000, XP Home Edition, XP Professional Display 800 x 600 pixels, 256 colors or higher Memory 8 MB or more Hard Disk 2 MB or more of free space Display 800 x 600 pixels, 256 colors or higher Yamaha USB MIDI Driver Computer A Macintosh computer with a PowerPC processor or better and a USB port OS Mac OS 8.6 to 9.2.2 (Mac OS X not supported) Memory 64 MB or more (recommended: 128 MB or more) Hard Disk 2 MB or more Yamaha USB MIDI Driver Computer A computer with a 166 MHz or faster Intel Pentium or Celeron family processor and a USB port OS Windows 98, 98SE, Me, 2000, XP Home Edition, XP Professional Memory 32 MB or more Hard Disk 2 MB or more of free space Yamaha CBX Driver (DM2000/02R96 only) OS Windows 95, 98, 98SE, Me, NT4.0, 2000, XP Home Edition, XP Professional System requirements for software not listed here can be found on the CD-ROM. You can check the latest version information of each program/ driver and its system requirements at the following website: http://www.yamahaproaudio.com/ 4 Yamaha USB MIDI Driver for OS X Computer A Macintosh computer with a PowerPC processor or higher and a USB port OS Mac OS X 10.2 or later Memory 64 MB or more (recommended: 128 MB or more) Hard Disk 2 MB or more System requirements for software not listed here can be found on the CD-ROM. You can check the latest version information of each program/ driver and its system requirements at the following website: http://www.yamahaproaudio.com/ Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  System Hookup Yamaha mixing console rear panel Mac or PC 1. Serial (DM2000/02R96 only) (Yamaha CCJ-Mac or equivalent) Mac serial port Serial cable (Yamaha CCJ-PC2 or equivalent) Adobe Reader Adobe Reader (available free of charge) must be installed on your computer in order for you to view the PDF format manuals for Studio Manager and the various editors. If you don’t have Adobe Reader, access the Adobe Corporation website at the URL shown below, and download Adobe Reader. http://www.adobe.com PC serial port USB MIDI Driver TO HOST USB 2. USB USB port USB cable If you are connecting your Yamaha mixing console to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this driver installed, skip this section. Computer 3. MIDI OUT Studio Manager IN MIDI interface MIDI cables NOTE: Before you connect to serial or MIDI ports, turn off your Yamaha mixing console and computer. Configuring Your Yamaha Mixing Console Press the DISPLAY ACCESS [SETUP] button to open the MIDI/ TO HOST Setup page. Under “Studio Manager,” select a port and assign an ID to your Yamaha mixing console. If you’ve connected the DM2000/02R96 to the serial port, set the TO HOST SERIAL options as appropriate (i.e., “PC-2” for a Windows PC, or “Mac” for a Macintosh computer). USB cable Driver Yamaha mixing console The procedure you use for installing the Yamaha USB driver depends on which version of Windows you’re using: • Windows 98 & 98SE: See page 6 • Windows Me: See page 7 • Windows 2000: See page 7 • Windows XP: See page 8 NOTE: Studio Manager is supported by only Windows 2000/XP. The driver for Windows 98/98SE/Me is necessary if you use other MIDI applications on Windows 98/98SE/Me. Warning: Do not set the TO HOST SERIAL option to “Mac” while your Yamaha mixing console is connected to your computer’s serial port. Doing so may damage your computer. Caution when using a USB connection If you’ve used the USB TO HOST connector to connect to your computer, you must perform the following actions. If you fail to do so, your computer or the connected mixing console may hang up, causing data damage or loss. If your computer or mixing console hangs up, turn off the power, and restart your computer. • Disable the energy conservation mode (suspend/sleep/ standby/hibernate) on your computer before connecting your computer via the USB TO HOST connector. • Connect the USB TO HOST connector to your computer before powering-on the mixing console. • Close all application programs (such as StudioManager) before powering the mixing console on/off or connecting/ disconnecting the USB cable. • Wait at least three seconds between turning the mixing console on or off, and between connecting and disconnecting the USB cable. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 5 ENGLISH Windows Installation The following illustration shows the available hookup methods you can use to connect your Yamaha mixing console to your computer: serial, USB, MIDI.  Windows 98 & 98SE 1 Start your computer and Windows, and then insert the included CD-ROM into your computer’s CD-ROM drive. 2 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 3 Turn on your Yamaha mixing console. The “Add New Hardware Wizard” appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 6 Select “Specify a location,” and specify “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click [Next]. When the driver is located, “YAMAHA USB MIDI Driver” is displayed, as shown below. 7 Click [Next]. NOTE: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click [OK], and in the “Copy files from” section of the subsequent dialog box, enter “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click [OK]. 4 The driver is installed, and the following window appears when the installation is complete. Click [Next]. The following window appears. 8 5 Click [Finish], and then restart your computer. Select “Search for the best driver for your device (Recommended),” and then click [Next]. The following window appears. 6 Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  Windows 2000 1 Start your computer and Windows, and then insert the included CD-ROM into your computer’s CD-ROM drive. 1 Start your computer to launch Windows, then log in as Administrator. 2 2 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. Insert the included CD-ROM into your computer’s CD-ROM drive. 3 Turn on your Yamaha mixing console. The “Add New Hardware Wizard” appears. If it doesn’t appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. Go to My Computer–>Control Panel–>System– >Hardware–>Driver Signing–>File Signature Verification, select “Ignore—Install all files, regardless of file signature,” and then click [OK]. 4 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 5 Turn on your Yamaha mixing console. The “Found New Hardware Wizard” appears. 6 7 Click [Next]. 8 In the subsequent window, select “CD-ROM drives” only, and then click [Next]. 3 4 5 Select “Automatic search for a better driver (Recommended),” and then click [Next]. Windows Me should be able to locate the driver automatically, in which case you can proceed to Step 5. If the driver cannot be located, select “Specify the location of the driver (Advanced),” click [Next], specify your CDROM drive (e.g., D:\USBdrv_), and then continue as prompted. The following window appears when the installation is complete. Select “Search for a suitable driver for my device (Recommended),” and then click [Next]. NOTE: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click [OK], and in the “Copy files from” section of the subsequent dialog box, enter “D:\USBdrv2k_” (replacing “D” with the drive letter of your CD-ROM drive), and then click [OK]. The driver is installed, and the message “Completing the Found New Hardware Wizard” appears. 9 Click [Finish], and then restart your computer. Click [Finish], and then restart your computer. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 7 ENGLISH Windows Me  Windows XP 1 Start your computer to launch Windows, then log in as Administrator. 2 Insert the included CD-ROM into your computer’s CD-ROM drive. 3 Click the [Start] button, and then click [Control Panel]. The following window appears. Installing Yamaha CBX Driver (DM2000/02R96 only) If you’re connecting your Yamaha mixing console to a serial port on your computer, you’ll need to install the Yamaha CBX driver. If you already have this driver installed, skip this section. 1 Double-click the “Mididrv_” folder on the CD-ROM. 2 3 Double-click “Setup.exe.” Follow the on-screen instructions to install the software. Installing an Editor You must install an Editor that supports your console before you install Studio Manager. 4 Click [Switch to Classic display] in the left column in the window to display all items in the Control Panel. 5 Go to System Hardware–>Driver signatures– >Driver signature options, select “Ignore—Install software without asking for confirmation,” and then click [OK]. 6 Click [OK] to close the “System Properties” window, and then click the Close button to close the “Control Panel” window. 7 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. 8 Turn on your Yamaha mixing console. The “Found New Hardware Wizard” appears. 9 Select “Install software automatically (recommended) (I),” and then click [Next]. The driver is installed, and the message “Completing the Found New Hardware Wizard” appears. 10 1 2 Double-click the “SM_” folder on the CD-ROM. 3 4 Double-click “Setup.exe.” Double-click the folder for the mixing console you’re using (for the DM2000, this is “DM2K_”). Follow the on-screen instructions to install an Editor that supports your console. Installing Studio Manager After you install an Editor, install Studio Manager. NOTE: If you install an Editor and Studio Manager that support another device, an older version of Studio Manager may be installed and Studio Manager may not operate correctly. In this case, install the correct version of Studio Manager from this CD-ROM, or download the latest version of Studio Manager from the Yamaha website. 1 2 3 4 Double-click the “SM_” folder on the CD-ROM. Double-click the “SM2_” folder. Double-click “Setup.exe.” Follow the on-screen instructions to install Studio Manager. Click [Finish], and then restart your computer. Installing Card Filer (DM2000 only) 1 2 3 8 Double-click the “Card_” folder on the CD-ROM. Double-click “Setup.exe.” Follow the on-screen instructions to install the software. For information on using Card Filer, see the “CardFilerManual.pdf.” This file is installed in the same folder as Card Filer. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  USB MIDI Driver If you’re connecting your Yamaha mixing console to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this driver installed, skip this section. Adobe Reader Computer NOTE: Adobe Reader is not required if you’re using Mac OS X. Adobe Reader (available free of charge) must be installed on your computer in order to view the PDF format manual for Card Filer. If you don’t have Adobe Reader, access the Adobe Corporation website at the URL shown below, and download Adobe Reader. http://www.adobe.com OMS (Open Music System) NOTE: If you are planning to use only Studio Manager, you do not need to install OMS. Install OMS to use MIDI applications other than Studio Manager. Studio Manager USB cable Driver Yamaha mixing console The procedure for installing the USB driver varies with different Macintosh OS versions. • Mac OS 8.6 – 9.2.2: See below. • Mac OS X: See page 10. Mac OS 8.6 – 9.2.2 NOTE: This USB MIDI driver is required for MIDI applications other than Studio Manager. Studio Manager supports Mac OS X 10.2 or later, but not earlier. To use Studio Manager, install the USB MIDI driver for Mac OS X. OMS enables you to use MIDI applications on a Macintosh computer with Mac OS 9 or earlier. If you already have OMS 2.3.3 or later installed, skip this section. 1 Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 1 Double-click the “Mac OS 9” folder on the CDROM. 2 Double-click the “Mac OS 9” folder on the CDROM. 2 Double-click the “USBdrv_” folder on the CD-ROM. 3 4 5 Double-click the “OMS_” folder on the CD-ROM. 3 Double-click “Install USB MIDI Driver.” The “Install USB MIDI Driver” window appears, as shown below. 6 When the installation is complete, click [Restart]. Double-click “Install OMS 2.3.8.” Follow the on-screen instructions to install the software. NOTE: Once the installation is complete, you may receive an error message warning that the installer did not quit. In this case, choose [Quit] from the [File] menu to quit the installer, then restart your computer. 7 Copy the “OMS_2.3_Mac.pdf” from the “OMS_” folder on the CD-ROM to the “Opcode:OMS Applications” folder on your hard disk. This file contains information on using and configuring OMS. Normally there’s no need to set the Install Location, because the startup disk is selected by default. To select another disk, click the [Switch Disk] button. Although you can select a destination folder from the pop-up menu, the files are installed in the specified disk’s System Folder regardless, so you can ignore that option. 4 Click [Install], and follow the on-screen instructions to install the software. 5 When the installation is complete, click [Restart]. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 9 ENGLISH Macintosh Installation  Mac OS X 6 Click [Continue]. The “Select a Destination” is displayed. 7 Select a destination for the driver installation, then click [Continue]. A window opens, displaying the message “Click install to perform a basic installation of this software.” The message “Installing this software requires 100MB of disk space” may appear. However, the actual required free disk space is specified in the “Macintosh System Requirements” on page 6. 8 Click [Install]. If the driver has already been installed, the [Upgrade] button is displayed instead of the [Install] button. The driver is installed, and message “The software was successfully installed” is displayed. 9 Click the [Close] button. The driver installation is complete. You can check the following locations to confirm that the driver has been installed: • Library -> Audio -> MIDI Drivers -> YAMAHAUSBMIDIDriver.plugin • Library -> PreferencePanes -> YAMAHAUSBMIDIPatch.prefPane NOTE: Before installing the driver, disconnect any USB devices (other than the keyboard and mouse) from the computer. 1 Start your computer, then log in as Administrator. To confirm that the Administrator account is available, select [System Preferences], then [Users (Account)]. 2 Double-click the “Mac OS X” folder on the CDROM. 3 4 Double-click the “USBdrv_” folder. 5 10 Double-click “USB-MIDI Driver v1. *****.mpkg” (***** represents the version number). An “Authenticate” window opens, prompting the password. If the window does not prompt you to enter the password, click the lock icon. Enter the password for the Administrator’s account. If you have not set the password, click [OK]. The “Welcome to the YAMAHA USBMIDI Driver Installer” window is displayed. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  Setting Up OMS You must install an Editor that supports your console before you install Studio Manager. The “OMS Setup for YAMAHA” folder on the included CD-ROM contains OMS studio setup files preconfigured for use with your Yamaha mixing console. 1 Double-click the “Mac OS X” folder on the CDROM. 2 3 Double-click the “SM_” folder. 4 Double-click “Install xxxxx_Editor” (“xxxxx” represents the name of the console). 5 Follow the on-screen instructions to install an Editor that supports your console. 1 Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. If you are connecting to the SERIAL TO HOST port, use a serial cable to connect to the Printer or Modem port on your computer. 2 3 Turn on your Yamaha mixing console. 4 Double-click the “Mac OS 9” folder on the CDROM. 5 6 Double-click the “OMS_” folder on the CD-ROM. 7 Copy the appropriate file to your computer’s hard disk, and then double-click it. Double-click the folder for the mixing console you’re using (for the DM2000, this is “DM2K_”). Installing Studio Manager After you install an Editor, install Studio Manager. NOTE: If you install an Editor and Studio Manager that support another device, an older version of Studio Manager may be installed and Studio Manager may not operate correctly. In this case, install the correct version of Studio Manager from this CD-ROM, or download the latest version of Studio Manager from the Yamaha website. 1 2 3 4 5 Double-click the “Mac OS X” folder on the CDROM. Double-click the “SM_” folder. OMS Setup starts and the “Studio Setup file” window appears. Double-click “Install Studio Manager.” Installing Card Filer (DM2000 only) 1 Double-click the “Mac OS 9” folder on the CDROM. 2 3 4 Double-click the “Card_” folder on the CD-ROM. Double-click “Install Card Filer.” Double-click the “OMS Setup for YAMAHA” folder. This folder contains the following OMS studio setup files: • ****-USB • ****-Modem • ****-Printer (**** will be the model name) NOTE: If the AppleTalk dialog box appears, click the [Turn It Off] button, and then click [OK] on the subsequent dialog box. Double-click the “SM2_” folder. Follow the on-screen instructions to install Studio Manager. Start your Macintosh, and then insert the included CD-ROM into your computer’s CD-ROM drive. 8 Choose [Make Current] from the [File] menu, and then save the setup. NOTE: If the console is connected to the computer’s Modem or Printer port, from the [Edit] menu select [Preferences], then select “Use Apple SerialDMA driver when available.” After completing the above setup, your Yamaha mixing console will be the only MIDI device in the current OMS studio setup. In order to use other MIDI devices, or to add an additional Yamaha mixing console, you must create a new studio setup. See the “OMS_2.3_Mac.pdf” for more information. Follow the on-screen instructions to install the software. For information on using Card Filer, see the “CardFilerManual.pdf.” This file is installed in the same folder as Card Filer. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 11 ENGLISH Installing an Editor  Getting Started Overview of Studio Manager Studio Manager is a cross-platform application that enables you to start multiple Editors that control YAMAHA hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a stand-alone application, or as a plug-in within supported DAW (digital audio workstation) / sequencer applications, such as Cubase SX 3.0.1 or later. In either case, the basic functionality is the same. For the latest information on compatible DAW applications, refer to the following website. http://www.studioconnections.org/ Hardware products Open an editor from Studio Manager Synchronize DM2000 DM2000 Editor application Synchronize Studio Manager Start up Studio Manager in stand-alone form Open from a compatible DAW application DM1000 DM1000 Editor application Synchronize SPX2000 SPX2000 Editor application The settings of each editor can be saved and recalled together from Studio Manager or the DAW application. In other words, you can change the settings of your entire system in a single operation by recalling the settings for multiple devices from Studio Manager or your DAW application. 12 Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  Starting and setting up Studio Manager 1 You’ll need to perform the following setup in order to use the editors in Studio Manager. Start up Studio Manager. As a stand-alone application in Windows 2000/XP: Click the [Start] button, place your mouse cursor over [Programs (All Programs)] -> [YAMAHA Studio Manager], then click [Studio Manager]. As a stand-alone application in Mac OS X: Open folders in the order of “Appears” -> “YAMAHA” -> “Studio Manager,” and double-click “SM2.” With Cubase SX: From Cubase SX’s [Device] menu, choose [Yamaha Studio Manager] to open the Studio Manager window. (Studio Manager starts running when Cubase SX is started.) 2 Set up Studio Manager. For details, refer to the PDF format Studio Manager manual. 3 Start up each editor. In the Studio Manager window, double-click the icon for each editor. Studio Manager window 4 Set up each editor. For details, refer to the PDF manual for each editor. 5 Synchronize each editor with your mixing console. For details, refer to the PDF manual for each editor. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 13 ENGLISH When you want to save setting files, you can do this from Studio Manager to recall multiple devices at once, or from an individual Editor to recall only a specific device. When you save your settings in your DAW application, the Studio Manager settings will also be saved together with the DAW application file, and can also be recalled in the same way. To use Studio Manager, you must first perform the following operations: 1. Start and configure Studio Manager (see below). 2. Start and configure an Editor. 3. Synchronize the application with the corresponding device. For more information on using the Editors, refer to the Owner’s Manual for the Editors.  Troubleshooting Q: Cannot install Studio Manager? A: Check the system requirements for Studio Manager (on page 5 for a Windows machine, or on page 6 for a Macintosh computer). If the computer’s operating system does not satisfy the system requirements, you cannot install the software. Q: The console is unable to communicate with Studio Manager via USB. A: Have you installed the Yamaha USB MIDI driver (Windows page 5, Mac page 9)? A: Is the USB cable connected correctly (page 5)? A: Is your Yamaha mixing console configured correctly (page 5)? A: Is Studio Manager set to the correct ID (page 5, the manual for each editor)? A: If a USB hub is connected between the console and the computer, remove it and connect the console directly to the computer. A: Mac OS 9 or earlier: Is OMS configured correctly (page 11)? On some systems, the included OMS studio setup files may not work correctly. In this case, you must create a new studio setup. See the “OMS_2.3_Mac.pdf” for more information. Q: Cannot install the Yamaha USB MIDI Driver? A: Is the USB cable connected correctly (page 5)? A: Try disconnecting the USB cable, and then reconnecting it. A: Windows: Is USB enabled? When your Yamaha mixing console is connected to your computer for the first time, if the “Add New Hardware Wizard” doesn’t appear, it may be because your computer’s USB controller is disabled. To check this, open the System control panel, click the Device Manager tab, and check for any crosses (x) or exclamation points (!) next to the “Universal Serial Bus controllers” and “USB Root Hub” items. If these items do have these marks next to them, your USB controller is disabled. For information on enabling your USB controller, refer to your computer’s documentation. A: Windows: If for some reason installation of the Yamaha USB Driver fails, your Yamaha mixing console may be registered as an unknown device and you may not be able to reinstall the driver until the unknown device is deleted. In this case, open the System control panel, click the Device Manager tab, and select the “View devices by connection” option. If an item called “Other devices” appears in the list, click it. If there’s an item called “Unknown device,” select it and then click the Remove button. Disconnect the USB cable, reconnect it, and then try reinstalling the driver again. Q: OMS stops working after installing the Yamaha USB MIDI Driver? A: Mac OS 9 or earlier: The Yamaha USB MIDI Driver supports Mac OS 8.6 through 9.2.2. If you install it on a computer that is running an earlier version of the Mac OS, OMS will not work correctly. In this case you should remove the Yamaha USB MIDI Driver as explained below. Q: How to remove & reinstall the Yamaha USB MIDI Driver A: Windows 98/Me: Presuming that the Yamaha USB MIDI Driver was installed successfully, and that your Yamaha mixing console has been recognized correctly, the driver can be removed from your computer as follows. Open the System control panel, click the Device Manager tab, select 14 the “YAMAHA USB MIDI Driver,” and then click the [Remove] button. After deleting the following files, disconnect the USB cable, reconnect it, and then reinstall the driver again. Windows\Inf\Other\YAMAHA****.INF (**** will be the model name) Windows\System\Xgusb.drv Windows\System\Ymidusb.sys A: Mac OS 9 or earlier: The driver can be removed from your computer by deleting the following files, after which you should restart your computer, reinstall the driver, and then set up OMS. System Folder:Control Panels:YAMAHA USB MIDI Patch System Folder:Extensions:USB YAMAHA MIDI Diver System Folder:OMS Folder:YAMAHA USB MIDI OMS Driver A: Mac OS X: When you delete the following files, the driver will be removed. After removing the driver, restart the computer and re-install the driver. — -> Library -> Preferences -> jp.co.yamaha.USBMIDIDriver.plist (This file is created after the driver is loaded.) Library -> Audio -> MIDI Drivers -> YAMAHAUSBMIDIDriver.plugin Library -> PreferencePanes -> YAMAHAUSBMIDIPatch.prefPane Note: “—” represents folders for users in the Users folder on the hard disk. Note: Only root users can delete the driver. Most users are not authorized to delete the driver. Q: The system fails to function correctly. A: Make sure that the console’s system software is version 2.0 or later. If the version is older than 2.0, the correct operation of the console along with Studio Manager is not guaranteed. A: If your computer seems unresponsive, make sure it satisfies the system requirements (Windows page 4, Mac page 4). A: Quit any other applications that you are not using. Q: After I installed a new editor, a different editor will no longer start up. A: For some combinations of versions of Studio Manager and the various editors, an editor may not start up. Please download the latest versions from the website, and reinstall the latest versions of all editors. http://www.yamahaproaudio.com/ Q: Studio Manager windows seem to open slowly. How can I achieve better performance? A: Windows: If you are using a laptop computer, turning off the hardware accelerator may improve system performance. Note that this accelerator setting affects the performance of other application programs. 1. In the Control Panel, double-click [Display] to open the “Display Properties” panel. 2. Click the Settings tab, then click [Advanced] to open the detailed properties panel. 3. Click the Troubleshoot tab, then set the “Hardware Acceleration” option to “None.” Q: Cannot suspend or resume your computer? A: Windows: Suspend will not work if there are any MIDI applications open. A: Windows 2000: Depending on your system’s USB controller, suspend and resume may not work properly. If your Yamaha mixing console does stop responding, try disconnecting and reconnecting the USB cable. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96)  PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION (“YAMAHA”). BY breaking the seal of this package YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. If you do not agree with the terms, do not install, copy, or otherwise use this software. 1. GRANT OF LICENSE AND COPYRIGHT Yamaha hereby grants you the right to use the software program(s) and data (“SOFTWARE”) accompanying this Agreement. The term SOFTWARE shall encompass any updates to the accompanying software and data. The SOFTWARE is owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright laws and all applicable treaty provisions. While you are entitled to claim ownership of the data created with the use of SOFTWARE, the SOFTWARE will continue to be protected under relevant copyrights. • You may use the SOFTWARE on your computer(s). • You may make one or reasonable copies of the SOFTWARE in machinereadable form for backup purposes only, if the SOFTWARE is on media where such backup copy is permitted. On the backup copy, you must reproduce Yamaha’s copyright notice and any other proprietary legends that were on the original copy of the SOFTWARE. • You may permanently transfer to a third party all your rights in the SOFTWARE, provided that you do not retain any copies and the recipient reads and agrees to the terms of this Agreement. 2. RESTRICTIONS • You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever. • You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE. • You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers. • You may not use the SOFTWARE to distribute illegal data or data that violates public policy. • You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation. Copyrighted data, including but not limited to MIDI data for songs, obtained by means of the SOFTWARE, are subject to the following restrictions which you must observe. • Data received by means of the SOFTWARE may not be used for any commercial purposes without permission of the copyright owner. • Data received by means of the SOFTWARE may not be duplicated, transferred, or distributed, or played back or performed for listeners in public without permission of the copyright owner. • The encryption of data received by means of the SOFTWARE may not be removed nor may the electronic watermark be modified without permission of the copyright owner. 3. TERMINATION This Agreement becomes effective on the day that you receive the SOFTWARE and remains effective until terminated. If any copyright law or provisions of this Agreement is violated, the Agreement shall terminate automatically and immediately without notice from Yamaha. Upon such termination, you must immediately destroy the licensed SOFTWARE, any accompanying written documents and all copies thereof. 4. LIMITED WARRANTY ON MEDIA As to SOFTWARE sold on tangible media, Yamaha warrants that the tangible media on which the SOFTWARE is recorded will be free from defects in materials and workmanship under normal use for a period of fourteen (14) days from the date of receipt, as evidenced by a copy of the receipt. Yamaha’s entire liability and your exclusive remedy will be replacement of the defective media if it is returned to Yamaha or an authorized Yamaha dealer within fourteen days with a copy of the receipt. Yamaha is not responsible for replacing media damaged by accident, abuse or misapplication. TO THE FULLEST EXTENT PERMITTED BY LAW, YAMAHA EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES ON THE TANGIBLE MEDIA, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 5. DISCLAIMER OF WARRANTY ON SOFTWARE You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided “AS IS” and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. 6. LIMITATION OF LIABILITY YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE. 7. THIRD PARTY SOFTWARE Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof. • Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, as to the THIRD PARTY SOFTWARE. • Yamaha shall not provide you with any service or maintenance as to the THIRD PARTY SOFTWARE. • Yamaha is not liable to you or any other person for any damages, including, without limitation, any direct, indirect, incidental or consequential damages, expenses, lost profits, lost data or other damages arising out of the use, misuse or inability to use the THIRD PARTY SOFTWARE. 8. GENERAL This Agreement shall be interpreted according to and governed by Japanese law without reference to principles of conflict of laws. Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. 9. COMPLETE AGREEMENT This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha. Studio Manager V2 Installation Guide (for DM2000/02R96/DM1000/01V96) 15 ENGLISH SOFTWARE LICENSING AGREEMENT