Samsung LN52A550P3F Manual de usuario
- Categoría
- Televisores LCD
- Tipo
- Manual de usuario
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al
Cliente.
Country
Customer Care Center
Web Site Address
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-01392A-00
BN68-01392A-00L02-Cover.indd 1 2008-02-21 ¿ÀÈÄ 9:07:58
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
•
•
•
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
Important Warranty Information Regarding Television Format Viewing
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format
full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ll the screen if
your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark
sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television
viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the
programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.
On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as
well as burned-in images, are not covered by your Samsung limited warranty.
SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products
purchased in the United States, for the warranty period originally specied, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the
Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation
to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the
product.
Excluded, but not limited to, are any originally specied provisions for, in-home or on-s
ite services, minimum or maximum repair
times,
exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
In the United States : 1-800-SAMSUNG (1-800-726-7864) In Canada : 1-800-SAMSUNG
See the warranty card for more information on warranty terms.
➣
BN68-01392A-00ENG.indb 1 2008-02-21 ¿ÀÈÄ 9:03:44
General Information
List of Features ..................................................................2
Accessories .......................................................................2
Viewing the Control Panel .................................................3
Viewing the Connection Panel ...........................................4
Remote Control .................................................................5
Installing Batteries in the Remote Control .........................6
Connections
Connecting VHF and UHF Antennas .................................6
Connecting Cable TV ........................................................7
Connecting a DVD Player or Cable Box/Satellite receiver
(Set-Top Box) via HDMI .....................................................8
Connecting a DVD Player or Cable Box/Satellite receiver
(Set-Top Box) via DVI ........................................................8
Connecting a DVD Player or Cable Box/Satellite receiver
(Set-Top Box) via Component cables ................................9
Connecting a Camcorder ...................................................9
Connecting a VCR ...........................................................10
Connecting a Digital Audio System .................................11
Connecting an Amplier/DVD Home Theater ..................11
Connecting a PC .............................................................11
Operation
Turning the TV On and Off ..............................................12
Plug & Play Feature .........................................................12
Changing Channels .........................................................13
Adjusting the Volume .......................................................14
Viewing the Display .........................................................14
Viewing the Menus ..........................................................14
Using the TOOLS Button .................................................15
Memorizing the Channels ................................................15
To Select the Source .......................................................17
To Edit the Input Source Name ........................................17
Picture Control
Changing the Picture Standard .......................................18
Customizing the Picture Settings .....................................18
Adjusting the Detailed Settings ........................................19
Resetting the Picture Settings to the Factory Defaults ....22
Conguring Picture Options .............................................23
Viewing Picture-in-Picture ...............................................27
Sound Control
Changing the Sound Standard ........................................29
Customizing the Sound ...................................................29
Setting the TruSurround XT .............................................30
Choosing Preferred Language ........................................31
Choosing a Multi-Channel Sound (MTS) track ................31
Automatic Volume Control ...............................................32
Setting the TV Speakers On/Off ......................................32
Listening to the Sound of the Sub (PIP) Picture ..............33
Resetting the Sound Settings to the Factory Defaults .....33
Connecting Headphones (Sold separately) .....................33
Channel Control
Managing Channels .........................................................34
Clearing Scrambled Channels - Digital ............................40
Fine Tuning Analog Channels ..........................................40
Checking the Digital-Signal Strength ...............................41
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PC Display
Using Your TV as a Computer (PC) Display ....................42
Display Modes .................................................................42
Setting up the TV with your PC .......................................43
Time Setting
Setting the Clock .............................................................45
Function Description
Selecting a Menu Language ............................................49
Using the V-Chip ..............................................................49
Viewing Closed Captions (On-Screen Text Messages)
- Analog ...........................................................................56
Viewing Closed Captions (On-Screen Text Messages)
- Digital ............................................................................57
Adjusting the TV On/Off Melody Sound ...........................58
Setting the Light Effect ....................................................58
Setting the Entertainment mode ......................................59
Using the Energy Saving Feature ....................................59
Upgrading the Software ...................................................60
WISELINK
Using the WISELINK Function ........................................61
Using the Photo List ........................................................62
Viewing a Photo or Slide Show ......................................68
Using the Music List
........................................................72
Playing a Music File .........................................................77
Using the Setup Menu .....................................................79
About Anynet
+
What is Anynet
+
?.............................................................80
Connecting Anynet
+
Devices...........................................80
Setting Up Anynet
+
.........................................................81
Scanning and Switching between Anynet
+
Devices ........81
Recording ........................................................................82
Listening through a Receiver (Home theater) ..................83
Troubleshooting for Anynet
+
...........................................83
Appendix
Troubleshooting ...............................................................84
Installing the Stand ..........................................................86
Disconnecting the Stand ..................................................86
Auto Wall-Mount Adjustment (Sold separately) ..............87
Wall Mount Kit Specications (VESA) .............................88
Using the Anti-Theft Kensington Lock .............................89
Specications ..................................................................90
Dimensions ......................................................................91
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
English - 1
English
Contents
Symbol Press Note One-Touch Button
BN68-01392A-00ENG.indb 1 2008-02-21 ¿ÀÈÄ 9:03:45
English - 2
List of Features
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver
(Set-Top Box) needed.
You can listen to music les and view pictures on USB Mass Storage Class (MSC) devices.
HDMI/DVI connection of your PC to this TV.
Excellent Picture Quality
- DNIe technology provides life-like clear images.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual surround system.
•
•
•
•
•
•
•
•
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control &
Batteries (AAA x 2)
(BN59-00673A)
Power Cord
(3903-000144)
Warranty Card /
Registration Card /
Safety Guide Manual
(Not available in all locations)
Cover-Bottom
(LN32A550P3F: BN63-04207B)
(LN37A550P3F: BN63-04437B)
(LN40A550P3F: BN63-04437B)
(LN46A550P3F: BN63-04374B)
(LN52A550P3F: BN63-04374B)
Stand
(LN32A550P3F: BN96-06935A)
Stand Screw (M4xL16)
(LN32A550P3F: 6002-001294)
Cleaning Cloth
(BN63-01798A)
Owner’s
Instructions
Ferrite Core
(3301-001110)
The items color and shape may vary depending on the model.
Ferrite Core (Power Cord)
The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near the
plug.
➣
➣
General Information
BN68-01392A-00ENG.indb 2 2008-02-21 ¿ÀÈÄ 9:03:46
English - 3
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
88
1
2
3
4
5
7 6
The product color and shape may vary depending on the model.
➣
Side Panel buttons
1
SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video, Component1, Component2,
PC, HDMI1, HDMI2/DVI, HDMI3, USB). In the on-
screen menu, use this button as you would use the
ENTER button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
– VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the – VOL + buttons as you
would use the ◄ and ► buttons on the remote control.
4
CH
Press to change channels.
In the on-screen menu, use the CH buttons as
you would use the ▼ and ▲ buttons on the remote
control.
5
(Power)
Press to turn the TV on and off.
6
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
7
POWER INDICATOR
Blinks and turns off when the power is on and lights up
in stand-by mode.
8
SPEAKERS
BN68-01392A-00ENG.indb 3 2008-02-21 ¿ÀÈÄ 9:03:47
English - 4
Viewing the Connection Panel
Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a
VCR. For more information on connecting equipment, see pages 6~11.
[TV Side Panel][TV Rear Panel]
The product color and shape may vary depending on the model.
➣
1
AUDIO OUT
Connects to the audio input jacks on your Amplier/
Home theater.
2
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3
PC IN [PC] / [AUDIO]
Connects to the video and audio output jacks on your PC.
4
HDMI IN 1, 2, 3 / DVI IN(HDMI2)[R-AUDIO-L]
Connects to the HDMI jack of a device with an HDMI
output.
- No sound connection is needed for an HDMI to HDMI
connection.
Use the HDMI IN 2 jack for DVI connection to an
external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection and the
DVI IN (HDMI2) [R-AUDIO-L] jacks for audio.
- When using an HDMI/DVI cable connection, you must
use the HDMI IN 2 jack.
5
ANT IN
Connects to an antenna or cable TV system.
6
WISELINK
Connect a USB mass storage device to view photo les
and play audio les.
7
AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
8
(HEADPHONE)
Connects a set of external headphones for private
listening.
9
POWER INPUT
Connects the supplied power cord.
0
COMPONENT IN 1, 2 / AV IN 1
Connects Component video/audio.
The COMPONENT IN 1 jack is also used as the
AV IN 1 jack.
- Connect the video cable to the COMPONENT IN 1
[Y/VIDEO] jack and the audio cable to the
COMPONENT IN 1 [R-AUDIO-L] jacks.
!
EX-LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing
angle using your remote control.
@
KENSINGTON LOCK
The Kensington Lock (optional) is a device used to
physically x the system when used in a public place.
If you want to use a locking device, contact the dealer
where you purchased the TV.
The location of the Kensington Lock may be different
depending on its model.
➣
BN68-01392A-00ENG.indb 4 2008-02-21 ¿ÀÈÄ 9:03:47
English - 5
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
1
POWER
Turns the TV on and off.
2
TV
Selects the TV mode directly.
3
NUMERIC BUTTONS
Press to change the channel.
4
Press to select additional
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel “54-3”, press “54”,
then press “ ” and “3”.
5
(MUTE)
Press to temporarily cut off the
sound.
6
VOL – / VOL +
Press to increase or decrease
the volume.
7
CH LIST
Used to display Channel Lists
on the screen.
8
TOOLS
Use to quickly select frequently
used functions.
9
INFO
Press to display information on
the TV screen.
0
COLOR BUTTONS
Use these buttons in the
Channel list, WISELINK, etc.
!
CC
Controls the caption decoder.
@
E.MODE
Press to select the preset
display and sound modes for
sports, cinema and games.
#
Use these buttons in the
DMA, WISELINK and Anynet
+
modes.
( : This remote can be
used to control recording on
Samsung recorders with the
Anynet
+
feature)
$
ON/OFF
Press to backlight the buttons
on the remote. This function is
convenient for using at night or
when the room is dark. (Using
the remote control with the
ON/OFF
light button set
to On will reduce the battery
usage time.)
%
PRE-CH
Tunes to the previous channel.
^
CH / CH
Press to change channels.
&
SOURCE
Press to display and select the
available video sources.
*
W.LINK (WISELINK)
This function enables you to
view and play photo and music
les from an external device.
(Refer to pages 62 (Photo) and
72 (Music))
(
MENU
Displays the main on-screen
menu.
)
RETURN
Returns to the previous menu.
a
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu
items and change menu values.
b
EXIT
Press to exit the menu.
c
DMA (Digital Media Adapter)
Use this when connecting
a SAMSUNG DMA device
through an HDMI interface and
switching to DMA mode.
For more information on the
operating procedures, refer to
the user manual of the DMA.
This button is available when
“Anynet
+
(HDMI-CEC)” is “On”.
(see page 81)
d
MTS
Press to choose stereo, mono
or Separate Audio Program
(SAP broadcast).
e
FAV.CH
Press to switch to your favorite
channels.
f
P.SIZE
Picture size selection.
The performance of the remote control may be affected by bright light.
➣
BN68-01392A-00ENG.indb 5 2008-02-21 ¿ÀÈÄ 9:03:48
English - 6
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the
compartment.
3.
Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
Using the remote control with the ON/OFF light button set to On will reduce the
battery usage time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
➣
➣
➣
➣
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see “Antennas
with 300 Ω Flat Twin Leads” below.
If your antenna has one lead that looks like the diagram to the right, see “Antennas with
75 Ω Round Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennaswith300ΩFlatTwinLeads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300
Ω twin at leads, follow the directions below.
1.
Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not
supplied). Use a screwdriver to tighten the screws.
2.
Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith75ΩRoundLeads
1. Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before
connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics
shops).
1.
Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
Connections
ANT IN
ANT IN
UHF
VHF
ANT IN
UHF
VHF
BN68-01392A-00ENG.indb 6 2008-02-21 ¿ÀÈÄ 9:03:49
English - 7
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1.
Plug the incoming cable into the ANT IN terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view
unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1.
Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2.
Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need
a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
1.
Find and disconnect the cable that is
connected to the ANT IN terminal on
your cable box.
This terminal might be labeled
“ANT IN”, “VHF IN” or simply, “IN”.
2. Connect this cable to a two-way
splitter.
3.
Connect an RF cable between the
OUTPUT terminal on the splitter and
the IN terminal on the cable box.
4. Connect an RF cable between the
ANT OUT terminal on the cable box
and the B–IN terminal on the RF(A/B)
switch.
5.
Connect another cable between the
other OUT terminal on the splitter and
the A–IN terminal on the RF (A/B)
switch.
6. Connect the last RF cable between
the OUT terminal on the RF (A/B)
switch and the ANT IN terminal on the
rear of the TV.
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”
position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
➣
➣
➣
ANT OUT
ANT IN
ANT IN
ANT IN
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
ANT IN
Splitter
Cable Box
Incoming
cable
RF (A/B)
Switch
Splitter
Cable Box
Incoming
cable
TV Rear
RF (A/B)
Switch
ANT IN
BN68-01392A-00ENG.indb 7 2008-02-21 ¿ÀÈÄ 9:03:50
English - 8
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1. Connect an HDMI Cable
between the HDMI IN
(1, 2 or 3) jack on the
TV and the HDMI jack
on the DVD Player or
Cable Box/Satellite
receiver (Set-Top Box).
What is HDMI?
• HDMI(High-Denition Multimedia Interface), is an interface that enables the
transmission of digital audio and video signals using a single cable.
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel conguration.
The TV may not output sound and pictures may be displayed with abnormal color when
DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3
are connected. When connecting an older HDMI cable and there is no sound, connect
the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2)
[R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that
provided the DVD player/Cable Box/Satellite receiver to conrm the HDMI version, then
request an upgrade.
HDMI cables that are not 1.3 may cause annoying icker or no screen display
.
➣
➣
➣
➣
or
DVD Player or Cable Box/Satellite receiver
(Set-Top Box) Rear Panel
TV Rear Panel
HDMI Cable (Not supplied)
TV Side Panel
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI
Adapter between the
HDMI IN 2 jack on the
TV and the DVI jack
on the DVD Player or
Cable Box/Satellite
receiver (Set-Top Box).
2.
Connect Audio Cables
between the DVI IN
(HDMI 2) [R-AUDIO-L]
jack on the TV and the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel conguration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣
➣
➣
TV Rear Panel
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
Audio Cable (Not supplied)
2
DVI to HDMI Cable (Not supplied)
1
BN68-01392A-00ENG.indb 8 2008-02-21 ¿ÀÈÄ 9:03:51
English - 9
or
TV Side Panel
Camcorder
S-Video Cable (Not supplied)
1
Audio Cable
(Not supplied)
2
Video Cable (Not supplied)
1
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1. Connect a Video Cable
(or S-Video Cable)
between the AV IN 2
[VIDEO] (or S-VIDEO)
jack on the TV and the
VIDEO OUT jack on the
camcorder.
2.
Connect Audio Cables
between the AV IN 2
[R-AUDIO-L] jacks on
the TV and the AUDIO
OUT jacks on the
camcorder.
Each Camcorder has a different back panel conguration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
➣
➣
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1. Connect a Component
Cable between the
COMPONENT IN
(1 or 2) [Y, PB, PR]
jacks on the TV and the
COMPONENT
[Y, PB, PR] jacks on the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
2.
Connect Audio
Cables between the
COMPONENT IN(1 or
2) [R-AUDIO-L] jacks on
the TV and the AUDIO
OUT jacks on the
DVD Player or Cable
Box/Satellite receiver
(Set-Top Box).
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting a Component video cable to COMPONENT IN 1, connect
the audio cable to COMPONENT IN 1 also.
Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back
panel conguration.
When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match
the color of the connection terminal to the cable.
➣
➣
➣
TV Rear Panel
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
Audio Cable
(Not supplied)
2
Component Cable (Not supplied)
1
BN68-01392A-00ENG.indb 9 2008-02-21 ¿ÀÈÄ 9:03:51
English - 10
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or
antenna from the back
of the TV.
2.
Connect the cable or
antenna to the ANT IN
terminal on the back of
the VCR.
3.
Connect an RF Cable
between the ANT OUT
terminal on the VCR
and the ANT IN terminal
on the TV.
4.
Connect a Video Cable
between the VIDEO
OUT jack on the
VCR and the AV IN 1
[Y/VIDEO] or AV IN 2
[VIDEO] jack on the TV.
5.
Connect Audio Cables
between the AUDIO
OUT jacks on the VCR
and the AV IN 1 (or AV
IN 2) [R-AUDIO-L] jacks
on the TV.
If you have a “mono”
(non-stereo) VCR,
use a Y-connector
(not supplied) to
hook up to the right
and left audio input
jacks of the TV. If
your VCR is stereo,
you must connect
two cables.
➣
ANT IN
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel conguration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not
match the color of the video cable (Yellow).
➣
➣
➣
S-Video Connection
Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared
to a standard VCR.)
1. To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2.
Connect an S-Video
Cable between the
S-VIDEO OUT jack on
the VCR and the
AV IN 2 [S-VIDEO] jack
on the TV.
3.
Connect Audio Cables
between the AUDIO
OUT jacks on the VCR
and the AV IN 2
[R-AUDIO-L] jacks on
the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Each VCR has a different back panel conguration.
When connecting a VCR, match the color of the connection terminal to the cable.
➣
➣
VCR Rear Panel
TV Rear Panel
TV Side Panel
RF Cable (Not supplied)
3
Video Cable (Not supplied)
4
Audio Cable (Not supplied)
5
VCR Rear Panel
TV Rear Panel
TV Side Panel
Audio Cable (Not supplied)
3
S-Video Cable (Not supplied)
2
RF Cable (Not supplied)
1
BN68-01392A-00ENG.indb 10 2008-02-21 ¿ÀÈÄ 9:03:52
English - 11
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.
1. Connect an Optical Cable
between the “DIGITAL AUDIO
OUT (OPTICAL)” jacks on
the TV and the Digital Audio
Input jacks on the Digital Audio
System.
When a Digital Audio System
is connected to the “DIGITAL
AUDIO OUT (OPTICAL)” jack:
Decrease the volume of the
TV and adjust the volume
level with the system’s volume
control.
5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
Each Digital Audio System has a different back panel conguration.
When the receiver (home theater) is set to On, you can hear sound output from
the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel
sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel
audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or
Cable/Satellite Box directly to an Amplier or Home Theater, not the TV.
➣
➣
➣
TV Rear Panel
Digital Audio System
Optical Cable (Not supplied)
ConnectinganAmplier/DVDHomeTheater
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] jacks on the TV
and AUDIO IN [R-AUDIO-L]
jacks on the Amplier/DVD
Home Theater.
When an audio amplier is
connected to the “AUDIO OUT
[R-AUDIO-L]” jacks: Decrease
the volume of the TV and
adjust the volume level with
the Amplier’s volume control.
Each Amplier/DVD Home Theater has a different back panel conguration.
When connecting an Amplier/DVD Home Theater, match the color of the
connection terminal to the cable.
➣
➣
TV Rear Panel
Amplier/DVDHomeTheater
Audio Cable (Not supplied)
Connecting a PC
Using the D-Sub Cable
1.
Connect a D-Sub Cable
between PC IN [PC] connector
on the TV and the PC output
connector on your computer.
2.
Connect a PC Audio Cable
between the PC IN [AUDIO]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
Using the HDMI/DVI Cable
1.
Connect an HDMI/DVI cable
between the HDMI IN 2 jack
on the TV and the PC output
jack on your computer.
2.
Connect a 3.5 mm Stereo mini-
plug/2RCA Cable between the
DVI IN(HDMI2) [R-AUDIO-L]
jack on the TV and the Audio
Out jack of the sound card on
your computer.
Each PC has a different back panel conguration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.
➣
➣
➣
TV Rear Panel
Using the D-Sub Cable
Using the HDMI/DVI Cable
TV Rear Panel
D-Sub Cable (Not supplied)
1
PC Audio Cable (Not supplied)
2
3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)
2
HDMI/DVI Cable (Not supplied)
1
BN68-01392A-00ENG.indb 11 2008-02-21 ¿ÀÈÄ 9:03:54
English - 12
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Operation
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
1.
Press the POWER button on the remote control.
The message “Menu Language, Store Demo, Channels, and Time will be
set.” is displayed.
Press the ENTER button, then “Select language of the OSD.” menu
is automatically displayed. Press the ENTER button.
2. Press the ▲ or ▼ button to select language, then press the ENTER
button. The message “Select ‘Home Use’ when installing this TV in your
home.” is displayed.
3.
Press the ◄ or ► button to select “Store Demo” or “Home Use”, then
press the ENTER button. The message “Select the Antenna source to
memorize.” is displayed.
We recommend setting the TV to “Home Use” mode for the best picture in
your home environment.
“Store Demo” mode is only intended for use in retail environments.
If the unit is accidentally set to “Store Demo” mode and you want to return
to “Home Use” (Standard): Press the Volume button on the TV. When the
volume OSD is displayed, press and hold the MENU button on the TV for
5 seconds.
4.
Press the ▲ or ▼ button to memorize the channels of the selected
connection. Press the ENTER button to select “Start”.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the
ENTER
button. If you have Digital cable, select the cable system
signal source for both Analog and Digital. Contact your local cable
company to identify the type of cable system that exists in your particular
area.
5.
The TV will begin memorizing all of the available channels.
To stop the search before it has nished, press the ENTER button with
“Stop” selected.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). And then, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message “Select the Clock Mode.” is displayed.
➣
➣
➣
➣
➣
➣
Plug & Play
Select ‘Home Use’ when installing this TV in your
home.
Home Use
Store Demo
EnterMove
Plug & Play
Select language of the OSD.
Menu Language : English
EnterMove
English
Español
Français
Plug & Play
Menu Language, Store Demo, Channels, and Time will
be set.
OK
ReturnEnter
Plug & Play
Select the Antenna source to memorize.
Air
Cable
Auto
Start
SkipEnterMove
Start
Start
Plug & Play
Auto Program in Progress.
Stop
Cable 38
50%
DTV Air : 02 Air : 11
DTV Cable : 23 Cable : 21
Skip
Enter
Start
Plug & Play
Selects the cable system.
Analog
Digital
HRC IRC
HRC IRCSTD
STD
SkipEnterMove
Plug & Play
Removing scrambled channel.
Stop
DTV Cable 41
77%
DTV Air : 05 Air : 12
DTV Cable : 25 Cable : 32
Skip
Enter
Plug & Play
Auto Program is completed.
119 channels are memorized.
DTV Air : 05 Air : 24
DTV Cable : 10 Cable : 80
OK
SkipEnter
BN68-01392A-00ENG.indb 12 2008-02-21 ¿ÀÈÄ 9:03:55
English - 13
6. Press the ENTER button.
Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button.
The message “Set to daylight saving time.” is displayed.
If you select “Manual”, “Set current date and time” is displayed.
(See page 45)
7.
Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER
button. The message “Select the time zone in which you live.” is displayed.
8.
Press the ▲ or ▼ button to highlight the time zone for your local area.
Press the ENTER button. If you have received a digital signal, the time
will be set automatically. If not, see page 45 to set the clock.
9.
The message “Enjoy your watching.” is displayed.
When you have nished, press the ENTER button.
If you want to reset this feature...
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ENTER button again to select “Plug & Play”.
For further details on setting up options, refer to the pages 12~13.
The “Plug & Play” feature is only available in the TV mode.
➣
Changing Channels
Using the Channel Buttons
1.
Press the CH or CH button to change channels.
When you press the CH
or CH button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that
were either erased or not memorized. See page 16 to memorize channels.
Using the Number Buttons
1.
Press the number buttons to go directly to a channel. For example, to select
channel 27, press 2, then 7.
For quick channel change, press the number buttons, then press the
ENTER
button.
➣
➣
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Auto
Manual
SkipEnterMove
Plug & Play
Set to daylight saving time.
DST : Auto
Off
On
SkipEnterMove
Plug & Play
Enjoy your watching.
OK
Setup
Plug&Play ►
Language : English
Time
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
Plug & Play
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
SkipEnter
Move
BN68-01392A-00ENG.indb 13 2008-02-21 ¿ÀÈÄ 9:03:56
English - 14
Adjusting the Volume
Using the Volume Button
1.
Press the VOL – or VOL + button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.
Press MUTE button and the sound cuts off.
“ ” is displayed on the screen.
2.
To turn mute off, press the MUTE button again or simply press the
VOL – or VOL + button.
Viewing the Display
The display identies the current channel and the status of certain audio-video
settings.
1.
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain
picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and
the display disappears automatically.
➣
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2.
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
➣
Using the Button
The button is used to select stations that broadcast a digital signal.
1. For example, for Channel 7-1, press 7, then , then 1.
HD indicates the TV is receiving a Digital High Denition signal.
SD indicates the TV is receiving a Standard Denition signal.
For quick channel change, press the number buttons, then press the
ENTER
button.
Using the PRE-CH Button to select the Previous Channel
1.
Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel.
Then use the PRE-CH button to quickly alternate between them.
➣
➣
➣
Mode
:
Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
DTV Air
4-2
♥
TV #8
Dolby Digital
9:59 am - 10:59 am
Sun, Sep 3 1:45 pm
Life On Venus Avenue
No Detaild Information
1080i
|
16:9
|
English
BN68-01392A-00ENG.indb 14 2008-02-21 ¿ÀÈÄ 9:03:56
English - 15
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes
depending on which external input mode you are viewing.
1.
Press the TOOLS button.
The “TOOLS” menu will appear.
2.
Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the
selected items. For a more detailed description of each function, refer to the
corresponding page.
Device List: see page 81
Picture Mode: see page 18
Sound Mode: see page 29
Sleep Timer: see page 47
Add to Favorite: see page 36
Switch to Cable (or Switch to Air): see page 15
PIP: see pages 27~28
Auto adjustment: see page 43
•
•
•
•
•
•
•
•
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available
channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ENTER button to select “Antenna”.
Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER
button.
Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Switch to Cable (or Switch to Air)”.
3. Press the ENTER button to switch “Cable” (or “Air”).
Channel
Antenna
:
Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Channel
Antenna
:
Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Air
Cable
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
e
Exit
EnterMove
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Move Enter
e
Exit
BN68-01392A-00ENG.indb 15 2008-02-21 ¿ÀÈÄ 9:03:57
English - 16
Storing Channels in Memory (Automatic Method)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: “Air” antenna signal.
Cable: “Cable” antenna signal.
Auto: “Air” and “Cable” antenna signals.
4.
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog signal cable system
source among “STD”, “HRC”, and “IRC”. Press the ▲ or ▼ button to select
“Start”, then press the ENTER button. If you have Digital cable TV, select
the cable system signal source for both Analog and Digital.
STD, HRC and IRC identify various types of cable TV systems. Contact
your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
5.
The TV begins memorizing all available stations.
After all the available channels are stored, it starts to remove scrambled
channels (see page 40). The Auto program menu then reappears.
If you want to stop Auto Programming, press the ENTER
button.
The “Stop Auto Program?” message will be displayed. Select “Yes” by
pressing the ◄ or ► button, then press the ENTER button.
Press the EXIT button to exit.
➣
➣
➣
➣
Channel
Antenna
:
Air
Auto Program ►
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
ReturnEnter
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Move
Start
Start
Start
Auto Program
Auto Program is completed.
3 channels are memorized.
DTV Cable : 1 Cable : 2
OK
ReturnEnter
ReturnEnter
Auto Program
Selects the cable system.
Analog
Digital
HRC IRC
HRC IRC
Move
STD
Start
STD
Auto Program
Auto Program in Progress.
Stop
Enter
Cable 38
50%
Return
DTV Cable : 12 Cable : 32
Auto Program
Removing scrambled channel.
Stop
Enter
DTV Cable 41
77%
Return
DTV Cable : 16 Cable : 45
Auto Program
Stop Auto Program?
77%
ReturnEnter
No
Yes
Move
DTV Cable : 16 Cable : 45
BN68-01392A-00ENG.indb 16 2008-02-21 ¿ÀÈÄ 9:03:58
English - 17
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable
Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input
source of your choice.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the ENTER button.
2. Press the ENTER button to select “Source List”.
Press the ▲ or ▼ button to select signal source, then press the ENTER
button.
Available signal sources: TV, AV1, AV2, S-Video, Component1,
Component2, PC, HDMI1, HDMI2/DVI, HDMI3, USB.
You can choose only those external devices that are connected to the TV.
In the “Source List”, connected inputs will be highlighted and sorted to the
top. Inputs that are not connected will be sorted to the bottom.
Using the Color buttons on the remote with the Source list
Red (Refresh): Refreshes the connecting external devices.
TOOLS (Option)
: Displays the “Edit Name” and “Information” menus.
•
•
Press the SOURCE button on the remote control to view an external signal
source.
➣
➣
➣
O
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Input”, then press the ENTER button.
Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “AV1”, “AV2”, “S-Video”, “Component1”,
“Component2”, “PC”, “HDMI1”, “HDMI2/DVI”, “HDMI3” input jack, then press
the ENTER button.
3.
Press the ▲ or ▼ button to select “VCR”, “DVD”, “Cable STB”,
“Satellite STB”, “PVR STB”, “AV Receiver”, “Game”, “Camcorder”, “PC”,
“TV”, “IPTV”, “Blu-Ray”, “HD DVD”, “Digital Media Adapter” input source, then
press the ENTER button.
Press the EXIT button to exit.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 2 port, you should set the “HDMI2/DVI” mode to “PC” in the “Edit
Name” of the “Input” mode.
➣
Source List
Edit Name
Input
TV
AV1 ----
AV2 ----
S-Video ----
Component1 ----
Component2 ----
PC ----
Refresh
TOOLS
Option
Source List
Edit Name ►
Input
Edit Name
AV1 : ---- ►
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1 : ----
▼
Enter ReturnMove
Edit Name
AV1 : ----
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1 : ----
----
VCR
DVD
Cable STB
Satellite STB
PVR STB
Enter ReturnMove
BN68-01392A-00ENG.indb 17 2008-02-21 ¿ÀÈÄ 9:03:58
English - 18
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1.
Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to
select “Dynamic”, “Standard” or “Movie”. Press the ENTER button.
Dynamic: Selects the picture for high-denition in a bright room.
Standard: Selects the picture for the optimum display in a normal
environment.
Movie: Selects the picture for viewing movies in a dark room.
•
•
•
3. Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Picture Mode”.
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Customizing the Picture Settings
Your television has several setting options that allow you to control the picture quality.
1.
To select the desired picture mode, follow the “Changing the Picture
Standard” instructions numbers 1 and 2.
2.
Press the ▲ or ▼ button to select “Backlight”, “Contrast”, “Brightness”,
“Sharpness”, “Color” or “Tint(G/R)”, then press the ENTER button.
3. Press the ◄ or ► button to decrease or increase the value of a particular
item. Press the ENTER button.
Press the EXIT button to exit.
When you make changes to “Backlight”, “Contrast”, “Brightness”,
“Sharpness”, “Color” or “Tint(G/R)”, the OSD will be adjusted accordingly.
In PC mode, you can only make changes to “Backlight”, “Contrast” and
“Brightness”.
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
Backlight: Adjusts the brightness of LCD back light.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
Sharpness: Adjusts the edge denition of the picture.
Color: Adjusts color saturation of the picture.
Tint(G/R): Adjusts the color tint of the picture.
•
•
•
•
•
•
➣
➣
➣
Picture
Mode
:
Dynamic
►
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Dynamic
Standard
Movie
Mode : Standard
Backlight : 7
►
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture Options
Picture
7Backlight
Enter Return
AdjustMove
Mode
:
Standard
Backlight : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
TOOLS
Device List
Picture Mode ◄ Standard ►
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Move Adjust
e
Exit
BN68-01392A-00ENG.indb 18 2008-02-21 ¿ÀÈÄ 9:03:59
English - 19
Adjusting the Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust
detailed picture settings.
Activating Detailed Settings
1.
Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then press the
ENTER button.
“Detailed Settings” is available in “Standard” or “Movie” mode.
3.
Press the ▲ or ▼ button to select “Detailed Settings”, then press the
ENTER button.
In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed Settings” items.
Setting the Black adjust
You can select the black level on the screen to adjust the screen depth.
4.
Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER
button.
5.
Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.
Press the ENTER button.
Off: Turns off the black adjustment function.
Low: Sets the black color depth to low.
Medium: Sets the black color depth to medium.
High: Sets the black color depth to high.
•
•
•
•
Setting the Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
6.
Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the
ENTER button.
7. Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”.
Press the ENTER button.
Off: Turns off the dynamic contrast adjustment function.
Low: Sets the dynamic contrast to low.
Medium: Sets the dynamic contrast to medium.
High: Sets the dynamic contrast to high.
•
•
•
•
➣
➣
Mode
:
Movie
►
Backlight : 5
Contrast : 95
Brightness : 50
Sharpness : 20
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
►
Picture Options
Picture Reset
Picture
Detailed Settings
Black Adjust : Off ►
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
EnterMove
Return
Black Adjust :
EnterMove
Return
Off
Low
Medium
High
Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off ►
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
EnterMove
Return
Dynamic Contrast :
EnterMove
Return
Off
Low
Medium
High
BN68-01392A-00ENG.indb 19 2008-02-21 ¿ÀÈÄ 9:03:59
English - 20
Adjusting the Gamma
You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3)
8.
Press the ▲ or ▼ button to select “Gamma”, then press the ENTER
button.
9.
Press the ◄ or ► button to decrease or increase the value.
Press the ENTER button.
Setting the Color Space
Color space is a color matrix composed of red, green and blue colors.
Select your favorite color space to experience the most natural color.
10.
Press the ▲ or ▼ button to select “Color Space”, then press the ENTER
button.
11.
Press the ENTER button again to select “Color Space”.
12. Press the ▲ or ▼ button to select “Auto”, “Native” or “Custom”.
Press the ENTER button.
Auto: Auto Color Space automatically adjusts to the most natural color
tone based on program sources.
Native: Native Color Space offers deep and rich color tone.
Custom: Adjusts the color range to suit your preference.
(see “Customizing the Color Space”)
•
•
•
Customizing the Color Space
13.
Press the ▲ or ▼ button to select “Color”, then press the ENTER button.
“Color” is available when “Color Space” is set to “Custom”.
14.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or
“Magenta”. Press the ENTER button.
15. Press the ▲ or ▼ button to select “Red”, “Green”, or “Blue” to change it.
Press the ENTER button.
16. Press the ◄ or ► button to decrease or increase the value of a particular
item. Press the ENTER button.
In “Color”, you can adjust the RGB values for the selected color.
To reset the adjusted RGB value, select “Reset”.
Red: Adjusts the red saturation level of the selected color.
Green: Adjusts the green saturation level of the selected color.
Blue: Adjusts the blue saturation level of the selected color.
Reset: Resets the color space to the default values.
•
•
•
•
Changing the adjustment value will refresh the adjusted screen.
Settings can be adjusted and stored for each external device you have
connected to an input of the TV. For example, if you have a DVD player
connected to HDMI 1 and it is currently selected, settings and adjustments
will be saved for the DVD player.
➣
➣
➣
➣
➣
Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto ►
White Balance
Flesh Tone : 0
Edge Enhancement : Off
EnterMove
Return
Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0 ►
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
EnterMove
Return
0
Gamma
EnterAdjust
Return
Color Space
Color Space : Auto
Color : Red
Red 50
Green 0
Blue 0
Reset
EnterMove
Return
Color Space :
EnterMove
Return
Auto
Native
Custom
Color Space
Color Space : Custom
Color : Red
Red 50
Green 0
Blue 0
Reset
EnterMove
Return
Color :
EnterMove
Return
Red
Green
Blue
Yellow
Cyan
Magenta
50Red
Color Space
Enter Return
AdjustMove
BN68-01392A-00ENG.indb 20 2008-02-21 ¿ÀÈÄ 9:04:00
English - 21
Adjusting the White Balance
You can adjust the color temperature for more natural picture colors.
17.
Press the ▲ or ▼ button to select “White Balance”, then press the
ENTER button.
18. Select the required option by pressing the ▲ or ▼ button, then press the
ENTER button.
19. Press the ◄ or ► button to decrease or increase the value of a particular
item. Press the ENTER button.
R-Offset: Adjusts the red color darkness.
G-Offset: Adjusts the green color darkness.
B-Offset: Adjusts the blue color darkness.
R-Gain: Adjusts the red color brightness.
G-Gain: Adjusts the green color brightness.
B-Gain: Adjusts the blue color brightness.
Reset: The previously adjusted white balance will be reset to the
factory defaults.
•
•
•
•
•
•
•
Changing the adjustment value will refresh the adjusted screen.
Adjusting the Flesh Tone
You can emphasize the pink ‘esh tone’ in the picture.
20.
Press the ▲ or ▼ button to select “Flesh Tone”, then press the ENTER
button.
21.
Press the ◄ or ► button to decrease or increase the value.
Press the ENTER button.
Changing the adjustment value will refresh the adjusted screen.
Setting the Edge Enhancement
You can emphasize object boundaries in the picture.
22.
Press the ▲ or ▼ button to select “Edge Enhancement”, then press the
ENTER button.
23. Press the ▲ or ▼ button to select “Off” or “On”. Press the ENTER button.
➣
➣
Enter
Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance ►
Flesh Tone : 0
Edge Enhancement : Off
Move
Return
White Balance
R-Offset 25
G-Offset 25
B-Offset 25
R-Gain 25
G-Gain 25
B-Gain 25
Reset
EnterMove
Return
25R-Offset
Enter ReturnAdjustMove
White Balance
Enter
Detailed Settings
▲
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off ►
xvYCC : Off
Move
Return
Edge Enhancement :
EnterMove
Return
Off
On
Enter
Detailed Settings
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0 ►
Edge Enhancement : Off
Move
Return
0
Flesh Tone
EnterAdjust
Return
BN68-01392A-00ENG.indb 21 2008-02-21 ¿ÀÈÄ 9:04:00
English - 22
Resetting the Picture Settings to the Factory Defaults
1. To select the desired picture mode, follow the “Changing the Picture
Standard” instructions numbers 1 and 2. (see page 18)
2.
Press the ▲ or ▼ button to select “Picture Reset”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “OK” or “Cancel”, then press the
ENTER button.
Press the EXIT button to exit.
Each mode can be reset.
➣
Setting the xvYCC
Setting the xvYCC mode to “On” increases detail and color space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks.
24.
Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER
button.
25.
Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
“xvYCC” is available when the picture mode is set to “Movie”, and the
external input is set to “HDMI” or “Component” mode.
➣
Detailed Settings
Picture Options
PictureReset ►
Picture
Enter
Detailed Settings
▲
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
xvYCC : Off ►
Move
Return
xvYCC :
EnterMove
Return
Off
On
Picture
Detailed Settings
Picture Options
PictureReset ►
OK
Cancel
BN68-01392A-00ENG.indb 22 2008-02-21 ¿ÀÈÄ 9:04:00
English - 23
ConguringPictureOptions
Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER
button.
Press the ▲ or ▼ button to select a particular item. Press the ENTER
button.
When you are satised with your setting, press the ENTER
button.
In PC mode, you can only make changes to the “Color Tone” and “Size” from
among the items in “Picture Options”.
Setting the Color Tone
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
2. Press the ▲ or ▼ button to select “Color Tone”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Cool2”, “Cool1”, “Normal”, “Warm1” or
“Warm2”. Press the ENTER button.
“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.
Settings can be adjusted and stored for each external device you have
connected to an input of the TV.
➣
➣
➣
➣
➣
Setting the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your
TV comes with six screen size options, each designed to work best with specic
types of video input. Your cable box or satellite receiver may have its own set of
screen sizes as well. In general, though, you should view the TV in 16:9 mode as
much as possible.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
2. Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
3.
Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Magnies the size of the picture on the screen.
Zoom2: Magnies the size of the picture more than “Zoom1”.
Wide Fit: Enlarges the aspect ratio of the picture to t the entire screen.
4:3 : Sets the picture to 4:3 normal mode.
Just Scan: Use the function to see the full image without any cutoff
when HDMI (720p/1080i/1080p), Component (1080i/1080p) or DTV
(1080i) signals are input.
•
•
•
•
•
•
Tint (G/R) : G50/R50
Detailed Settings
PictureOptions ►
Picture Reset
Picture
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Cool2
Cool1
Normal
Warm1
Warm2
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9 ►
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
BN68-01392A-00ENG.indb 23 2008-02-21 ¿ÀÈÄ 9:04:01
English - 24
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting “Zoom1”, “Zoom2” or “Wide Fit”:
Press the ◄ or ► button to select “Position”, then press the ENTER
button. Press the ▲ or ▼ button to move the picture up and down.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component
(1080i/1080p) mode:
Press the ◄ or ► button to select “Position”, then press the ENTER
button. Press the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
HD (High Denition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source Picture Size
ATV, Video, S-Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P) 16:9, 4:3, Wide Fit, Just Scan
PC 16:9, 4:3
Alternately, you can press the P.SIZE button on the remote control repeatedly
to change the picture size.
16:9
Zoom1 U Move
Zoom2 U Move
16:9
Sets the picture to 16:9 wide mode.
Zoom1
Magnies the size of the picture on
the screen.
Zoom2
Magnies the size of the picture more
than “Zoom1”.
Wide Fit U Move
4:3 Just Scan
Wide Fit
Enlarges the aspect ratio of the
picture to t the entire screen.
4:3
Sets the picture to 4:3 normal mode.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i/1080p), Component
(1080i/1080p) or DTV (1080i) signals
are input.
➣
➣
➣
➣
➣
➣
O
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
ReturnEnter
Adjust
Reset
Position
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
ReturnEnter
Reset
Position
Adjust
BN68-01392A-00ENG.indb 24 2008-02-21 ¿ÀÈÄ 9:04:01
English - 25
Setting the Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital
Noise Reduction feature to help reduce any static and ghosting that may appear
on the screen.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2.
Press the ▲ or ▼ button to select “Digital NR”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Off”, “Low”, “Medium”, “High” or “Auto”.
Press the ENTER button.
Off: Turns the screen noise reduction function off.
Low: Reduces screen noise at a low level.
Medium: Reduces screen noise at a medium level.
High: Reduces screen noise at a high level.
Auto: Automatically recognizes and reduces screen noise.
•
•
•
•
•
Press the EXIT button to exit.
Setting the DNIe (Digital Natural Image engine)
This TV includes the DNIe function to provide high visual quality. If you set DNIe
to on, you can view the screen with the DNIe feature activated.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2.
Press the ▲ or ▼ button to select “DNIe”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER
button.
Off: Switches off the DNIe mode.
On: Switches on the DNIe mode.
•
•
Press the EXIT button to exit.
DNIe™ (Digital Natural Image engine)
This feature brings you a more detailed image with 3D noise reduction
and detail, contrast and white enhancement.
“DNIe” is only available in “Dynamic” mode.
Setting the HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2.
Press the ▲ or ▼ button to select “HDMI Black Level”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Normal” or “Low”, then press the
ENTER button.
Normal: The screen gets brighter.
Low: The screen gets darker.
•
•
This function is active only when an external device is connected to the
TV via HDMI. “HDMI Blasorkck Level” function may not be compatible
with all external devices.
Press the EXIT button to exit.
➣
➣
➣
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto ►
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Off
Low
Medium
High
Auto
Picture Options
Color Tone : Cool1
Size : 16:9
Digital NR : Auto
DNle : On ►
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Picture Options
Color Tone : Cool1
Size : 16:9
Digital NR : Auto
DNle : On
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Off
On
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal ►
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Normal
Low
BN68-01392A-00ENG.indb 25 2008-02-21 ¿ÀÈÄ 9:04:02
English - 26
Setting the Film Mode
The TV can be set to automatically sense and process lm signals from all
sources and adjust the picture for optimum quality.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2.
Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Off” or “Auto”, then press the ENTER
button.
Press the EXIT button to exit.
“Film mode” is supported in TV, Video, S-Video,
Component (480i / 1080i) and HDMI (480i / 1080i).
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the
blue signal only by removing the red and green signals from the video signal so
as to provide a Blue Filter effect that is used to adjust the Color and Tint of video
equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values
appropriate to the signal level of each video device using the Red/Green/Blue/
Cyan/Magenta/Yellow Color Bar Patterns, without using an additional Blue Filter.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2.
Press the ▲ or ▼ button to select “Blue Only Mode”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER
button.
Press the EXIT button to exit.
“Blue Only Mode” is available when the picture mode is set to “Movie” or
“Standard”.
➣
➣
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Off
Auto
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off ►
ReturnEnter
Move
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
ReturnEnter
Move
Off
On
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off ►
Blue Only Mode : Off
ReturnEnter
Move
BN68-01392A-00ENG.indb 26 2008-02-21 ¿ÀÈÄ 9:04:02
English - 27
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source.
(See page 33 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in
the same mode. Please see ‘PIP Settings’ below for details.
While V-Chip (See page 49) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
2. Press the ENTER button again.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
If you turn the TV off while watching in PIP mode and turn it on again, the
PIP window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when
the main picture is from an external device connected to HDMI 1,
HDMI/DVI 2, HDMI 3, Component1, 2 or PC.
PIP Settings
Main picture Sub picture
Component 1, 2
HDMI 1, HDMI/DVI 2, HDMI 3
PC
Analog TV broadcasts only
Changing the Size of the PIP Window
3.
Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
Press the ▲ or ▼ button to select the required option, then press the ENTER
button.
You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
Changing the Position of the PIP Window
4.
Press the ▲ or ▼ button to select “Position”, then press the ENTER
button.
Press the ▲ or ▼ button to select the required option, then press the ENTER
button.
In Double Window ( ) and Double Wide ( ) modes, “Position”
cannot be selected.
➣
➣
➣
➣
➣
➣
Setup
Entertainment : Off
Energy Saving : Off
PIP ►
SW Upgrade
PIP
PIP : Off
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
Off
On
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
BN68-01392A-00ENG.indb 27 2008-02-21 ¿ÀÈÄ 9:04:03
English - 28
Changing the PIP Channel
5.
Press the ▲ or ▼ button to select “Air/Cable”, then press the ENTER
button.
6.
Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER
button.
7. Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
8.
Press the ▲ or ▼ button to select the desired channel in the PIP window.
Press the ENTER button.
You can select only analog TV broadcasts on the PIP screen
(sub-picture).
Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
5. Press the EXIT or TOOLS button to exit.
➣
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
Air
Cable
PIP
PIP : On
Size :
Position :
Air/Cable : Air
Channel : Air 11
ReturnEnter
Move
▲
Air 11
▼
PIP
PIP ◄ Off ►
Size :
Posion :
Air/Cable : Air
Channel : Air 11
Adjust
Return
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
PIP
e
Exit
EnterMove
BN68-01392A-00ENG.indb 28 2008-02-21 ¿ÀÈÄ 9:04:03
English - 29
Sound Control
Changing the Sound Standard
You can select the sound mode to best suit the programming you’re watching.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to
select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting,
then press the ENTER button.
Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies
Speech: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.
(see “Customizing the Sound”)
•
•
•
•
•
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Sound Mode”.
3. Press the ◄ or ► button to select the required option.
4. Press the EXIT or TOOLS button to exit.
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Equalizer”, then press the ENTER
button.
3.
Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or
“Custom” sound setting, then press the ENTER button.
Mode : Custom
Equalizer ►
SRS TruSurround XT : Off
Preferred Language : English
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
Sound
ReturnEnter
Equalizer
Mode : Standard
Balance L R
100Hz - +
300Hz - +
1kHz - +
3kHz - +
10kHz - +
Move
Standard
Music
Movie
Speech
Custom
Mode :Custom ►
Equalizer
SRS TruSurround XT : Off
Preferred Language : English
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound
Mode :Custom ►
Equalizer
SRS TruSurround XT : Off
Audio Language
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound
Standard
Music
Movie
Speech
Custom
TOOLS
Device List
Picture Mode : Standard
Sound Mode ◄ Custom ►
Sleep Timer : Off
Add to Favorite
Switch to Cable
Move Adjust
e
Exit
BN68-01392A-00ENG.indb 29 2008-02-21 ¿ÀÈÄ 9:04:03
English - 30
4. Press the ▲ or ▼ button to select a particular frequency to adjust.
Press the ◄ or ► button to increase or decrease the level of the particular
frequency.
Mode: Selects the sound mode among the predened settings.
Balance L/R: Adjusts the balance between the right and left speaker.
Bandwidth Adjustment (100Hz, 300Hz, 1kHz, 2kHz, 3kHz, 10kHz):
To adjust the level of different bandwidth frequencies.
•
•
•
Resetting the Equalizer Settings to the Factory Defaults
5.
Press the ▲ or ▼ button to select “Reset”, then press the ENTER button.
The equalizer resets to the factory defaults.
Press the EXIT button to exit.
➣
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “SRS TruSurround XT”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER
button.
Press the EXIT button to exit.
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
ReturnEnter
Equalizer
Mode : Custom
Balance L R
100Hz - +
300Hz - +
1kHz - +
3kHz - +
10kHz - +
▼
Move
Adjust
ReturnEnter
Equalizer
▲
Balance L R
100Hz - +
300Hz - +
1kHz - +
3kHz - +
10kHz - +
Reset ►
Move
Sound
Mode : Custom
Equalizer
SRS TruSurround XT
:Off ►
Preferred Language : English
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
Sound
Mode : Custom
Equalizer
SRS TruSurround XT
:Off ►
Preferred Language : English
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
Off
On
BN68-01392A-00ENG.indb 30 2008-02-21 ¿ÀÈÄ 9:04:04
English - 31
Choosing Preferred Language
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example,
simultaneous translations of the program into foreign languages).
Select the language you would like to hear the audio track in.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Preferred Language”, then press the
ENTER button.
3. Press the ▲ or ▼ button to choose the language (English, Spanish or
French) you want, then press the ENTER button.
Press the EXIT button to exit.
“Preferred Language” is available only in Digital TV mode.
You can only select the language from among the actual languages being
broadcast.
You can listen in a language other than the “Preferred Language” by pressing
the MTS button on the remote control.
➣
➣
O
Choosing a Multi-Channel Sound (MTS) track
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Multi-Track Sound”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select a setting you want, then press the ENTER
button. Press the EXIT button to exit.
Mono: Choose for channels that are broadcasting in mono or if you are
having difculty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually
a foreign-language translation.
•
•
•
“Multi-Track Sound” is available only in Analog TV mode.
Depending on the particular program being broadcast, you can listen to
“Mono”, “Stereo” or “SAP”.
Press the MTS button on the remote control repeatedly to select “Mono”,
“Stereo” or “SAP”.
➣
➣
O
Sound
Equalizer
SRS TruSurround XT
: Off
PreferredLanguage:English ►
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
Sound
Equalizer
SRS TruSurround XT : Off
PreferredLanguage:English ►
Multi-Track Sound : Stereo
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
English
Spanish
French
Sound
SRS TruSurround XT
: Off
Preferred Language : English
Multi-TrackSound :Stereo ►
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
Mono
Stereo
SAP
Sound
SRS TruSurround XT
: Off
Preferred Language : English
Multi-TrackSound :Stereo ►
Auto Volume : Off
TV Speaker : On
Sound Select : Main
Sound Reset
BN68-01392A-00ENG.indb 31 2008-02-21 ¿ÀÈÄ 9:04:05
English - 32
Automatic Volume Control
Reduces the differences in volume level among broadcasters.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Auto Volume”, then press the ENTER
button.
3. Press the ▲ or ▼ button to set “Auto Volume”, “Off” or “On” then press the
ENTER button.
Press the EXIT button to exit.
Setting the TV Speakers On/Off
Sound output from the TV speakers is muted.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “TV Speaker”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Off”, then press the ENTER button.
Press the EXIT button to exit.
When “TV Speaker” is set to “Off”, you can operate only “Preferred
Language” (in digital TV mode), “Multi-Track Sound” (in analog TV mode),
“Sound Select” (in PIP mode) and “Sound Reset” in Sound menu.
The VOL –, VOL + and MUTE buttons do not operate when the “TV
Speaker” is set to “Off”.
TV's Internal Speakers Audio Out (Optical, L/R Out) to Sound System
RF AV, S-Video
Component, PC, HDMI
RF AV, S-Video
Component, PC, HDMI
TV Speaker On
Speaker Output Speaker Output Speaker Output Sound Output Sound Output Sound Output
TV Speaker Off
Mute Mute Mute Sound Output Sound Output Sound Output
Video No Signal
Mute Mute Mute Mute Mute Mute
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
➣
➣
Sound
Preferred Language : English
Multi-Track Sound : Stereo
AutoVolume :Off ►
TV Speaker : On
Sound Select : Main
Sound Reset
Sound
Preferred Language : English
Multi-Track Sound : Stereo
AutoVolume :Off ►
TV Speaker : On
Sound Select : Main
Sound Reset
Off
On
Sound
Multi-Track Sound : Stereo
Auto Volume : Off
TVSpeaker :On ►
Sound Select : Main
Sound Reset
Sound
Multi-Track Sound : Stereo
Auto Volume : Off
TVSpeaker :On ►
Sound Select : Main
Sound Reset
Off
On
BN68-01392A-00ENG.indb 32 2008-02-21 ¿ÀÈÄ 9:04:05
English - 33
Listening to the Sound of the Sub (PIP) Picture
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Sound Select”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Main” or “Sub”, then press the ENTER
button.
Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
•
•
You can select this option when “PIP” is set to “On”. (See page 27)
➣
Resetting the Sound Settings to the Factory Defaults
You can restore the Sound settings to the factory defaults.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Sound Reset”, then press the ENTER
button.
Press the EXIT button to exit.
3.
Press the ◄ or ► button to select “Reset All”, “Reset Sound Mode” or
“Cancel” then press the ENTER button.
Press the EXIT button to exit.
Reset All: All the sound values return to default settings.
Reset Sound Mode: Current sound values return to defalt settings.
•
•
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the
room.
When you insert the headphone’s plug into the headphone jack, you can
operate only “Preferred Language” (in digital TV mode), “Multi-Track Sound”
(in analog TV mode), “Auto Volume”, “Sound Select” (in PIP mode) and “Sound
Reset” in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to
the TV.
The headphone volume and TV volume are adjusted separately.
➣
➣
➣
➣
Sound
Auto Volume : Off
TV Speaker : On
SoundSelect :Main ►
Sound Reset
Sound
Auto Volume : Off
TV Speaker : On
SoundSelect :Main ►
Sound Reset
Main
Sub
Sound
TV Speaker : On
Sound Select : Main
SoundReset ►
Enter Return
Sound Reset
Select the sound reset options.
Cancel
Reset Sound Mode
Reset All
Move
TV Side Panel
15
BN68-01392A-00ENG.indb 33 2008-02-21 ¿ÀÈÄ 9:04:06
English - 34
Managing Channels
Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts.
Viewing All Channels
Show all currently available channels.
To use the Channel List function, rst run “Auto Program” (see page 16).
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel to view, then press the ENTER
button. You can watch the selected channel.
Press the CH LIST button on the remote control to bring up the channel lists.
Using the Color buttons on the Remote with the Channel List
Red (Antenna): Switches to Air or Cable.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
TOOLS (Option): Displays the “Add” (or “Delete”), “Add to Favorite”(or
“Delete from Favorite”), “Timer Viewing”, “Channel Name Edit”, and “Auto
Program” menus.
•
•
•
•
A gray-colored channel indicates the channel has been deleted.
The “Add” menu only appears for deleted channels.
A channel marked with the “♥” mark means the channel has been set as a Favorite.
The “Delete from Favorite” menu only appears for channels with the “♥” mark.
➣
O
➣
➣
Channel Control
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
BN68-01392A-00ENG.indb 34 2008-02-21 ¿ÀÈÄ 9:04:07
English - 35
Erasing and Adding Channels
You can delete or add a channel to display the channels you want.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel to delete, then press the
TOOLS button.
5.
Press the ENTER button to select “Delete”.
All deleted channels will be shown on “All Channels” menu.
6.
Press the EXIT button to exit.
You can also add a channel to the “Added Channels” menu in the same
manner.
A channel must be deleted before it can be added back to the “Added
Channels” list.
To Add (Restore) a channel back to the Added Channel List, follow steps
1-3 above, press the ▲ or ▼ button to select a channel to add, the press
the TOOLS button. Press the ENTER
button to select Add.
Press the CH LIST button on the remote control to bring up the channel
lists.
➣
➣
➣
➣
➣
O
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Auto Program
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
BN68-01392A-00ENG.indb 35 2008-02-21 ¿ÀÈÄ 9:04:07
English - 36
Setting Your Favorite Channels
You can set channels you watch frequently as favorites.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “All Channels”.
Shows all currently available channels.
Press the ENTER button.
4. Press the ▲ or ▼ button to select a channel as a favorite channel.
Adding multiple channels to Favorites
Press the ▲ or ▼ button to select the desired channel in the channel
list. Then press the yellow button. Repeat the above operation to select
multiple channels. The mark appears to the left of the selected
channels.
5.
Press the TOOLS button.
6.
Press the ▲ or ▼ button to select “Add to Favorite”, then press the ENTER
button. The “♥” symbol will be displayed and the channel will be set as a
favorite.
7.
To cancel your favorite channel selection, press the TOOLS button when a
favorite channel is selected.
Press the ▲ or ▼ button to select “Delete from Favorite”, then press the
ENTER button.
The channel is deleted from “Favorites” and the “♥” mark also disappears.
Press the EXIT button to exit.
You can also Add or Delete a channel from Favorites in the “Added
Channels” menu in the same manner.
All favorite channels will be shown on “Favorite” menu.
Press the CH LIST button on the remote control to bring up the channel
lists.
To select the favorite channels you have set up, press the FAV.CH button
on the remote control.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Add to Favorite” (or “Delete from
Favorite”), then press the ENTER button.
The current channel is added to (or deleted from) Favorites.
➣
➣
➣
➣
O
O
➣
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
All Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Auto Program
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
Switch to Cable
Move Enter
e
Exit
BN68-01392A-00ENG.indb 36 2008-02-21 ¿ÀÈÄ 9:04:08
English - 37
Reserving a Program (Timer Viewing)
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel
List; even when you are watching another channel.
To reserve a program, set the current time rst. See pages 45~46. Reserved channels can only be set if they are in the
“Channel List” (See page 34).
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select a channel, then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Timer Viewing”, then press the ENTER
button. The Reserve a Program (Timer Viewing) screen appears.
4.
Press the ▲/▼/◄/► buttons to reserve a program and then press the
ENTER button. Reserving a program has been completed.
Press the EXIT button to exit.
You can also reserve a program in the “All Channels” or “Favorite” menus
using the same procedures.
For information on how to conrm a viewing reservation, refer to page 38.
Only memorized channels can be reserved.
You can set the channel, month, day, year, hour and minute directly by
pressing the number buttons on the remote control.
Press the CH LIST button on the remote control to bring up the channel lists.
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Program
Guide for the channel appears. You can reserve a program according to the
procedures described above.
: A program currently being broadcast.
: A reserved program
➣
➣
➣
O
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
Timer Viewing
Air
Antenna
4
Channel
Once
01 - 01 - 2008
Date
ReturnEnter
Adjust
Move
10:09 am
Start Time
Repeat
Added Channels
Air
Zoom
TOOLS
Option
Watch
1/1/2008
12:59 pm M.Spillane’s mike Ha...
1:59 pm Quincy, M.E
3:21 pm The Equalizer
2 Air
4 Air
4-2 ♥TV#8
8 Air
13 Air
13-1 ♥ TV #3
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Auto Program
BN68-01392A-00ENG.indb 37 2008-02-21 ¿ÀÈÄ 9:04:09
English - 38
ConrmingaViewingReservation
You can view, modify or delete a reservation.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the
ENTER button.
2. Press the ◄ button to select “Added Channels”.
3. Press the ▲ or ▼ button to select “Programmed”.
Shows all current reserved programs.
Press the ENTER button.
Modifying a viewing reservation
4.
To select a reservation item to be modied, press the ▲ or ▼ button and
then press the TOOLS button.
5.
Press the ENTER button to select “Change Info”.
6. Press the ▲/▼/◄/► buttons to change a reservation setting and then
press the ENTER button. The reservation modication is applied.
Canceling a reservation
4.
To select a reservation item to be canceled, press the ▲ or ▼ button, and
then press the TOOLS button.
5.
Press the ▲ or ▼ button to select “Cancel schedules”, then press the
ENTER button.
6. Press the ◄ or ► button to select “OK”, then press the ENTER button.
The viewing reservation has been canceled.
Press the EXIT button to exit.
Programmed Option
Change Info: Select to change a viewing reservation.
Cancel schedules: Select to cancel a viewing reservation.
Information: Select to view a viewing reservation.
•
•
•
Press the CH LIST button on the remote control to bring up the channel
lists.
➣
O
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Programmed
1/1/2008
1:59 pm 13-1 TV #3 Quincy, M.E
2:59 pm 13-1 TV #3 The Equalizer
3:59 pm 13-1 TV #3 McMillan & Wife
5:59 pm 13-1 TV #3 M.Spillane’s mike Hammer
Change Info
Cancel schedules
Information
Air
Antenna
Zoom
Select
TOOLS
Option
Information
Programmed
1/1/2008
1:59 pm 13-1 TV #3 Quincy, M.E
2:59 pm 13-1 TV #3 The Equalizer
3:59 pm 13-1 TV #3 McMillan & Wife
5:59 pm 13-1 TV #3 M.Spillane’s mike Hammer
Air
Antenna
Zoom
Select
TOOLS
Option
Information
BN68-01392A-00ENG.indb 38 2008-02-21 ¿ÀÈÄ 9:04:09
English - 39
Labeling Channels - Analog
Channels can labeled so that their call letters appear whenever the channel is selected.
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select the channel to be assigned a new name,
then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Channel Name Edit”, then press the
ENTER button.
4. Press the ▲/▼/◄/► button to select a letter, then press the ENTER
button.
Numeric buttons: You can enter numbers.
Red button: You can switch between English and Characters.
Green button: You can delete an already entered character.
Yellow button: You can enter a blank space.
Blue button: Press this button to nish renaming a channel.
•
•
•
•
•
5. When you have nished, press the blue button to assign the new name.
Press the EXIT button to exit.
The names of digital broadcasting channels are automatically assigned
and cannot be labelled.
Storing Channels in Memory (Auto Program)
1.
Press the MENU button.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select the channel to be assigned a new name,
then press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER
button.
For further details on setting up options, refer to page 16.
➣
➣
Channel
Auto Program
Clear Scrambled Channel
ChannelList ►
Fine Tune
Signal Strength
6
_
Number
Character
Delete
Blank
Done
0~9
A
B C D E F G
I J K L M NH
P Q R S T UO
W X Y ZV
Enter ReturnMove
Channel Name Edit
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Auto Program
2 Air
4 Air
4-2 ♥ TV #8
8 Air
13 Air
13-1 ♥ TV #3
Alice’s Adventures in Wonderland
Added Channels
Air
Antenna
Zoom
Select
TOOLS
Option
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Auto Program
BN68-01392A-00ENG.indb 39 2008-02-21 ¿ÀÈÄ 9:04:10
English - 40
Clearing Scrambled Channels - Digital
The “Clear Scrambled Channel” function is used to lter out scrambled channels after “Auto Program” is completed.
This process may take up to 20~30 minutes.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Clear Scrambled Channel”, then press the
ENTER button. It searches scrambled channels, which are to be removed
from the list.
To stop searching scrambled channels;
Press the ENTER
button to select “Stop”.
Press the ◄ button to select “Yes”, then press the ENTER button.
3. When the scrambled channel searching is completed, press the ENTER
button.
Press the EXIT button to exit.
This function is only available in “Cable” mode.
➣
➣
Fine Tuning Analog Channels
Use ne tuning to manually adjust a particular channel for optimal reception.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER
button.
3.
Press the ◄ or ► button to adjust the ne tuning.
To store the ne tuning setting in the TV’s memory, press the ENTER
button.
If you do not store the ne-tuned channel in memory, adjustments are not
saved.
4.
To reset the ne tuning setting, press the ▼ button to select “Reset”, then
press the ENTER button.
Press the EXIT button to exit.
"*” will appear next to the name of ne-tuned channels.
Only analog TV channels can be ne tuned.
➣
➣
➣
Channel
Antenna : Cable
Auto Program
ClearScrambledChannel ►
Channel List
Fine Tune
Signal Strength
Clear Scrambled Channel
Removing scrambled channel.
Stop
DTV Cable 10
3%
Enter
Return
Channel
Clear Scrambled Channel
Channel List
FineTune ►
Signal Strength
Fine Tune
Air 6
Reset
ReturnSave
Move
Adjust
0
Fine Tune
Air 6*
Reset
ReturnSave
Move
Adjust
+3
Fine Tuned
Fine Tune
Air 6
ReturnEnter
Move
0
Reset
BN68-01392A-00ENG.indb 40 2008-02-21 ¿ÀÈÄ 9:04:10
English - 41
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either
perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot ne tune a digital
channel. You can, however, adjust your antenna to improve the reception of available digital channels.
1.
Press the MENU button to display the menu. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER
button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Continue to adjust the antenna until you nd the best position with the
strongest signal.
Press the EXIT button to exit.
Channel
Channel List
Fine Tune
SignalStrength ►
Signal Strength
OK
Enter Return
BN68-01392A-00ENG.indb 41 2008-02-21 ¿ÀÈÄ 9:04:11
English - 42
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be
different, depending upon your particular version of Windows and your particular video card. However, even if your actual
screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer
manufacturer or Samsung Dealer.)
1.
First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and
a display dialog-box will appear.
3.
When the control panel window appears, click on “Display” and a display dialog-
box will appear.
4.
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the
correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.
PC Display
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the
system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there
may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub Input
Mode Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+ / -
- / +
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
- / -
- / -
- / -
+ / +
+ / +
+ / +
- / -
- / -
+ / +
+ / +
+ / +
+ / +
+ / +
CVT 1920 x 1080RB 66.587 59.934 138.500 + / -
HDMI/DVI Input
Mode Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
- / -
+ / +
- / -
+ / +
+ / +
+ / +
CEA 1920 x 1080p 67.500 60.000 148.500 + / +
BN68-01392A-00ENG.indb 42 2008-02-21 ¿ÀÈÄ 9:04:11
English - 43
Setting up the TV with your PC
How to Auto Adjust
Use the Auto “Adjust function” to have the TV set automatically adjust the video
signals it receives. The function also automatically ne-tunes the settings and
adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
Preset: Press the SOURCE button to select PC mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER
button.
Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER
button.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by ne tuning alone, then make the vertical frequency
adjustments on your PC and ne tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
Preset: Press the SOURCE button to select PC mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Screen”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Coarse” or “Fine”, then press the ENTER
button. Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
➣
➣
➣
➣
Brightness : 45
Sharpness : 50
Auto Adjustment
►
Screen
Detailed Settings
Picture Options
Picture Reset
Picture
TV
PC ----
AV1 ----
AV2 ----
S-Video ----
Component1 ----
Component2 ----
Refresh
TOOLS
Option
Auto Adjustment in progress. Please Wait.
Sharpness : 50
Auto Adjustment
Screen
►
Detailed Settings
Picture Options
Picture Reset
Picture
Screen
Coarse 52
Fine 24
Position
Image Reset
EnterMove
Return
52Coarse
Enter ReturnAdjustMove
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
PIP
Auto Adjustment
e
Exit
EnterMove
BN68-01392A-00ENG.indb 43 2008-02-21 ¿ÀÈÄ 9:04:11
English - 44
Changing the Screen Position
Adjust the PC’s screen positioning if it does not t the TV screen.
Preset: Press the SOURCE button to select PC mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Screen”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Position”, then press the ENTER
button.
4.
Press the ▲ or ▼ button to adjust the V-Position.
Press the ◄ or ► button to adjust the H-Position.
Press the ENTER button.
Press the EXIT button to exit.
Initializing the Screen Position, Coarse and Fine
You can replace all image settings with the factory default values.
Preset: Press the SOURCE button to select PC mode.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Screen”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Image Reset”, then press the ENTER
button.
Press the EXIT button to exit.
➣
➣
Sharpness : 50
Auto Adjustment
Screen
►
Detailed Settings
Picture Options
Picture Reset
Picture
Screen
Coarse 52
Fine 24
Position ►
Image Reset
EnterMove
Return
Sharpness : 50
Auto Adjustment
Screen
►
Detailed Settings
Picture Options
Picture Reset
Picture
Screen
Coarse 52
Fine 24
Position
Image Reset ►
EnterMove
Return
Image Reset is completed.
Position
ReturnEnter
Adjust
BN68-01392A-00ENG.indb 44 2008-02-21 ¿ÀÈÄ 9:04:12
English - 45
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
2. Press the ENTER button to select “Clock”.
3. Press the ENTER button to select “Clock Mode”.
Press the ▲ or ▼ button to select “Manual”, then press the ENTER
button.
4.
Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER
button.
5.
Press the ◄ or ► button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,
or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ button,
then press the ENTER button.
Press the EXIT button to exit.
The current time will appear every time you press the INFO button.
You can set the month, day, year, hour and minute directly by pressing the
number buttons on the remote control.
➣
➣
Time Setting
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Time
Clock : -- : -- -- ►
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
ReturnEnter
Move
Clock
Clock Mode : Auto
Clock Set
Time Zone
DST : Off
ReturnEnter
Auto
Manual
Move
Clock Set
--
Month
--
Day
----
Year
--
Hour
--
Minute
--
am/pm
ReturnEnter
Adjust
Move
Clock Set
01
Month
01
Day
2008
Year
12
Hour
00
Minute
am
am/pm
ReturnEnter
Adjust
Move
BN68-01392A-00ENG.indb 45 2008-02-21 ¿ÀÈÄ 9:04:12
English - 46
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
2. Press the ENTER button to select “Clock”.
3. Press the ENTER button to select “Clock Mode”.
Press the ▲ or ▼ button to select “Auto”, then press the ENTER button.
4. Press the ▲ or ▼ button to select “Time Zone”, then press the ENTER
button.
5.
Press the ▲ or ▼ button to highlight the time zone for your local area, then
press the ENTER button.
6. Press the ▲ or ▼ button to select “DST” (Daylight Saving Time), then press
the ENTER button. Press the ▲ or ▼ button to select “Off” or “On”, then
press the ENTER button.
Press the EXIT button to exit.
Depending on the broadcast station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time
automatically.
➣
➣
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Time
Clock : -- : -- -- ►
Sleep Timer
: Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
ReturnEnter
Move
Clock
Clock Mode : Auto
Clock Set
Time Zone ►
DST : Off
ReturnEnter
Move
Move
Clock
Clock Mode : Auto
Clock Set
Time Zone
DST : Off
ReturnEnter
Off
On
Time Zone
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Enter
Move
Return
BN68-01392A-00ENG.indb 46 2008-02-21 ¿ÀÈÄ 9:04:13
English - 47
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Sleep Timer”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select the minute, then press the ENTER
button.
To cancel the set sleep timer:
Press the ▲ or ▼ button to select “Off”, then press the ENTER button.
4. Press the EXIT button to exit.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Sleep Timer”.
3. Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Time
Clock : -- : -- --
Sleep Timer : Off
Timer 1 : Inactivated
Timer 2 : Inactivated
Timer 3 : Inactivated
Off
30 min.
60 min.
90 min.
120 min.
150 min.
180 min.
ReturnEnter
Move
TOOLS
Device List
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer ◄ Off ►
Add to Favorite
Switch to Cable
Move Adjust
e
Exit
BN68-01392A-00ENG.indb 47 2008-02-21 ¿ÀÈÄ 9:04:13
English - 48
Setting the On/Off Timer
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
2. Three different On/Off Timer Settings can be made. Press the ▲ or ▼
button to select “Timer 1”, “Timer 2” or “Timer 3”, then press the ENTER
button.
3.
Press the ◄ or ► button to select the desired item below.
Press the ▲ or ▼ button to adjust the setting.
On Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Off Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Volume: Set the required volume level.
Contents: When the “On Timer” is active, you can turn on a specic
channel or play back contents such as photo or audio les.
TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
Antenna: Select “Air” or “Cable”.
Channel: Select the desired channel.
Music: Select the folder containing MP3 les on the USB device.
Photo: Select the folder containing JPEG les on the USB device.
Repeat: Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun”,
or “Manual”.
When “Manual” is selected, press the ► button to select the
desired day of the week. Press the ENTER
button over the
desired day and the mark will appear.
•
•
•
•
–
–
–
–
–
•
➣
Press the EXIT button to exit.
You can set the hour, minute and channel by pressing the number
buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the
timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
➣
➣
Setup
Plug & Play
Language : English
Time ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Contents
TV
TV/USB
am
Channel
None
Music
ReturnEnter
Adjust
Move
Cable
Antenna
3
Channel
None
Photo
Time
Clock : 12 : 00 am
Sleep Timer : Off
Timer 1 : Inactivated ►
Timer 2 : Inactivated
Timer 3 : Inactivated
ReturnEnter
Move
Timer 1
12 00 am Inactivate
00 am Inactivate
On Time
Off Time
12
Once
ReturnEnter
Adjust
Move
Volume
10
Contents
Repeat
Sun Mon Tue Wed Thu Fri Sat
TV Cable 3
BN68-01392A-00ENG.indb 48 2008-02-21 ¿ÀÈÄ 9:04:13
English - 49
Selecting a Menu Language
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
Press the ▲ or ▼ button to select “Language”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “English”, “Español” or “Français”.
Press the ENTER button.
Press the EXIT button to exit.
Function Description
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are set up or changed.
“V-Chip” function is not available in HDMI, Component or PC mode.
Setting Up Your Personal ID Number (PIN)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
The default PIN number of a new TV set is “0-0-0-0”.
➣
➣
Setup
Plug & Play
Language : English ►
Time
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
Setup
Plug & Play
Language : English
Time
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
English
Español
Français
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
BN68-01392A-00ENG.indb 49 2008-02-21 ¿ÀÈÄ 9:04:14
English - 50
3. The “V-Chip” screen will appear.
Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER
button. The Change PIN screen will appear. Choose any 4 digits for your
PIN and enter them. As soon as the 4 digits are entered, the “Conrm new
PIN.” screen appears. Re-enter the same 4 digits. When the Conrm screen
disappears, your PIN has been memorized.
Press the EXIT button to exit.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 : Power Off. → Mute → 8 → 2
→ 4 → Power On.
How to Enable/Disable the V-Chip
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear.
To enable the V-Chip feature, press the ENTER button so that the “V-Chip
Lock” eld is “On”. (Pressing the ▲ or ▼ button will alternate between “On”
and “Off”.)
Press the ENTER button.
Press the EXIT button to exit.
➣
Change PIN
Enter new PIN.
Return
0~9
Enter PIN
Confirm new PIN.
V-Chip
V-Chip Lock : Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN ►
ReturnEnter
Move
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : Off ►
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
V-Chip
V-Chip Lock : Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
Off
On
BN68-01392A-00ENG.indb 50 2008-02-21 ¿ÀÈÄ 9:04:14
English - 51
How to Set up Restrictions Using the TV Parental Guidelines
First, set up a personal identication number (PIN) and enable the V-Chip. (See previous section.) Parental restrictions can
be set up using either of two methods: The TV guidelines or the MPAA rating.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “TV
Parental Guidelines”, then press the ENTER button.
4. The “TV Parental Guidelines” screen will appear.
Press the ▲ or ▼ button to select one of the six aged based categories:
TV-Y: Young children
TV-Y7: Children 7 and over
TV-G: General audience
•
•
•
TV-PG: Parental guidance
TV-14: Viewers 14 and over
TV-MA: Mature audience
•
•
•
5. At this point, one of the TV-Ratings is selected.
Press the ENTER button. Depending on your existing setup, the “ ”
symbol will be selected. (Blank = Unblocked, = Blocked)
While “ ” is selected, press the ENTER button to block or unblock the
category. To select a different TV-Rating, press the ▲ or ▼ button and then
repeat the process.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional
options. See the next step to change any of the following sub-ratings:
ALL / FV / V / S / L / D
The V-Chip will automatically block certain categories that are “more
restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will
automatically be blocked. Similarly, if you block the TV-G category,
then all the categories in the “young adult” group will be blocked (TV-G,
TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together
similarly. (See next section.)
6.
How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14 or
TV-MA (See Step 4) and press the ► button.
The “ ” symbol will be displayed for each sub-rating. While “ ” is
selected, press the ENTER button to go to a sub rating. Press ENTER
to block the sub rating. To select a different TV-Rating, press the ▲ or ▼
button and then repeat the process.
ALL: Lock all TV ratings.
FV: Fantasy violence
V: Violence
•
•
•
S: Sexual situation
L: Adult Language
D: Sexually Suggestive Dialog
•
•
•
The V-chip will automatically block certain categories that are “More
restrictive”. For example, if you block “L” sub-rating in TV-PG, then the “L”
sub-ratings in TV-14 and TV-MA will automatically be blocked.
7.
Press the EXIT button to clear all the screens. (Or proceed to the next
section, and set up additional restrictions based on the MPAA codes.)
These categories consist of two separate groups: TV-Y and TV-Y7 (young
children through age 7) and TV-G through TV-MA (everybody else).
The restrictions for these two groups work independently: If a household
includes very young children as well as young adults, the TV guidelines
must be set up separately for each age group. (See next step.)
➣
➣
➣
➣
➣
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : On
TV Parental Guidelines ►
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
TV Parental Guidelines
ALL
FV V S L D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Allow All
Block All
ReturnEnter
Move
TV Parental Guidelines
ALL
FV V S L D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Allow All
Block All
ReturnEnter
Move
BN68-01392A-00ENG.indb 51 2008-02-21 ¿ÀÈÄ 9:04:15
English - 52
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for
movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “MPAA
Rating”, then press the ENTER button.
4. The “MPAA Rating” screen will appear. Repeatedly press the ▲ or ▼ button
to select a particular MPAA category. Pressing the ▲ or ▼ button will cycle
through the MPAA categories:
G: General audience (no restrictions).
PG: Parental guidance suggested.
PG-13: Parents strongly cautioned.
R: Restricted. Children under 17 should be accompanied by an adult.
NC-17: No children under age 17.
X: Adults only.
NR: Not rated.
•
•
•
•
•
•
•
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
While a particular category is selected, press the ENTER
button to
activate it. The “ ” symbol will be displayed. Press the ENTER
button to block or unblock the category.
The V-Chip will automatically block any category that is “More restrictive”.
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X”
will automatically be blocked also.
Press the EXIT button to exit.
➣
➣
➣
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : On
TV Parental Guidelines
MPAA Rating ►
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
MPAA Rating
G
PG
PG-13
R
NC-17
X
NR
Allow All
Block All
ReturnEnter
Move
MPAA Rating
G
PG
PG-13
R
NC-17
X
NR
Allow All
Block All
ReturnEnter
Move
BN68-01392A-00ENG.indb 52 2008-02-21 ¿ÀÈÄ 9:04:16
English - 53
How to Set up Restrictions Using the Canadian English
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Canadian English”, then press the ENTER button.
4. Press the ▲ or ▼ button to select a appropriate restriction. Press the ENTER
button to activate the restriction selected. The “ ” symbol is indicated.
Press the EXIT button to exit.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
C: Programming intended for children under age 8.
C8+: Programming generally considered acceptable for children 8
years and over to watch on their own.
G: General programming, suitable for all audiences.
PG: Parental Guidance.
14+: Programming contains themes or content which may not be
suitable for viewers under the age of 14.
18+: Adult programming.
•
•
•
•
•
•
The V-Chip will automatically block any category that is “More restrictive”.
For example, if you block G category, then PG, 14+ and 18+ will
automatically be blocked also.
➣
➣
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : On
TV Parental Guidelines
MPAA Rating
Canadian English ►
Canadian French
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
Canadian English
C
C8+
G
PG
14+
18+
Allow All
Block All
ReturnEnter
Move
Canadian English
C
C8+
G
PG
14+
18+
Allow All
Block All
ReturnEnter
Move
BN68-01392A-00ENG.indb 53 2008-02-21 ¿ÀÈÄ 9:04:16
English - 54
How to Set up Restrictions Using the Canadian French
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Canadian French”, then press the ENTER button.
4. Press the ▲ or ▼ button to select an appropriate restriction. Press the
ENTER button to activate the restriction selected. The “ ” symbol is
indicated.
Press the EXIT button to exit.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
G: General
8 ans+: Programming generally considered acceptable for children 8
years and over to watch on their own.
13 ans+: Programming may not be suitable for children under the age
of 13.
16 ans+: Programming is not suitable for children under the age of 16.
18 ans+: Programming restricted to adults.
•
•
•
•
•
The V-Chip will automatically block any category that is “More restrictive”.
For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18
ans+ will automatically be blocked also.
➣
➣
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French ►
Downloadable U.S. Rating
Change PIN
ReturnEnter
Move
Canadian French
G
8 ans+
13 ans+
16 ans+
18 ans+
Allow All
Block All
ReturnEnter
Move
Canadian French
G
8 ans+
13 ans+
16 ans+
18 ans+
Allow All
Block All
ReturnEnter
Move
BN68-01392A-00ENG.indb 54 2008-02-21 ¿ÀÈÄ 9:04:17
English - 55
Using the V-Chip for Digital channels
Parental restriction information can be used while watching DTV channels.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER
button. The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select
“Downloadable U.S. Rating”, then press the ENTER button.
If information is not downloaded from the broadcasting station, the
Downloadable U.S. rating menu is deactivated.
Parental restriction information is automatically downloaded while
watching DTV channels. It may take several seconds.
The Downloadable U.S. rating menu is available for use after information
is downloaded from the broadcasting station. However, depending on the
information from the broadcasting station, it may not be available for use.
4.
Press the ▲ or ▼ button to select a appropriate restriction. Press the ENTER
button to activate the restriction selected. The “ ” symbol is indicated.
Press the EXIT button to exit.
Allow all: Press to unlock all TV ratings.
Block all: Press to lock all TV ratings.
Parental restriction levels differ depending on the broadcasting station.
The default menu name and Downloadable US rating changes depending
on the downloaded information.
Even if you set the On-screen display to your desired language, the
“Downloadable U.S. Rating” menu will appear in English only.
The rating will automatically block certain categories that are more
restrictive.
The rating titles (For example: Humor Level..etc) and TV ratings (For
example: DH, MH, H..etc) may differ depending on the broadcasting
station.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go
blank and the following message will appear:
1.
Press the ENTER button to select OK.
To resume normal viewing, tune to a different channel using CH or
CH button. Under certain conditions (depending on the rating of the local
TV programs) the V-Chip might lock out all the channels. In this case, use the
V-Chip function for an “emergency escape”.
2.
Enter your PIN, then press the ENTER button and press the ▲ or ▼
button to temporarily disable the V-Chip Lock.
If you forget the PIN, press the remote-control buttons in the following
sequence, which resets the pin to 0-0-0-0 :
Power Off. → MUTE → 8 → 2 → 4 → Power On.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Setup
Language : English
Time
V-Chip ►
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
V-Chip
* *
Enter PIN
*
Return
0~9
Enter PIN
V-Chip
V-Chip Lock : On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating ►
Change PIN
ReturnEnter
Move
Downloadable U.S. Rating
Humor Level
►
1/2
Allow All
Block All
ReturnEnter
Move
DH
MH
H
VH
EH
Rating title
The number of all
rating information
The number of current
rating information
Channel Is Locked by
MPAA R/A/K/T
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Received Rating : TV-G/MPAA X/Canadian English : C8+
This channel is blocked by V-Chip. Prees ENTER to
unblock.
Enter
Change
CH
OK
BN68-01392A-00ENG.indb 55 2008-02-21 ¿ÀÈÄ 9:04:17
English - 56
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external
device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER
button.
3. Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to
select “On”, then press the ENTER button.
4. Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER
button. Press the ▲ or ▼ button to select submenu (Default, CC1~CC4 or
Text1~Text4) you want, the press the ENTER button.
Press the EXIT button to exit.
The default is “CC1”.
CC1: The Primary Synchronous Caption Service. These are captions
in the primary language that must be in sync with the sound, preferably
matched to a specic frame.
CC2: The Special Non-Synchronous Use Captions. This channel
carries data that is intended to augment information carried in the
program.
CC3: Secondary Synchronous Caption Service. Alternate program-
related caption data, typically second language captions.
CC4: Special Non-Synchronous Use Captions. Similar to CC2.
Text1: First Text Service. This may be various non-program related
data.
Text2: Second Text Service. Additional data, usually not program
related.
Text3/Text4: Third and Fourth Text Services. These data channels
should be used only if Text1 and Text2 are not sufcient.
•
•
•
•
•
•
•
•
The Caption feature doesn’t work in Component, HDMI or PC modes.
The availability of captions depends on the program being broadcast.
Press the CC button on the remote control to turn the Caption “On” or “Off”.
➣
➣
O
Setup
Time
V-Chip
Caption ►
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Caption
Caption : Off ►
Caption Mode : Default
Digital Caption Options
ReturnEnter
Caption
Caption : Off
Caption Mode : Default
Digital Caption Options
ReturnEnter
Off
On
Move
Caption
Caption : Off
Caption Mode : Default
Digital Caption Options
ReturnEnter
Move
Default
CC1
CC2
BN68-01392A-00ENG.indb 56 2008-02-21 ¿ÀÈÄ 9:04:18
English - 57
Viewing Closed Captions (On-Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER
button.
3.
Press the ENTER button to select “Caption”.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
4. Press the ▲ or ▼ button to select “Caption Mode”, then press the
ENTER button. Press the ▲ or ▼ button to select submenu (Default,
Service1~Service6, CC1~CC4 or Text1~Text4) you want, then press the
ENTER button.
5. Press the ▲ or ▼ button to select “Digital Caption Options”, then press the
ENTER button.
“Digital Caption Options” are available only when “Default” and
“Service1~Service6” can be selected in “Caption Mode”.
Service1~6 in digital caption mode may not be available depending on the
broadcast.
6.
Press the ▲ or ▼ button to select “Size”, then press the ENTER button.
Press the ▲ or ▼ button to select the desired Caption option, then press the
ENTER button. Press the ▲ or ▼ button to select the desired sub-menu
options (see options below), then press ENTER .
Press the EXIT button to exit.
The availability of captions depends on the program being broadcast.
“Default” means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color.
“Foreground Opacity” and “Background Opacity” cannot be both set to
Transparent.
Size: This option consists of “Default”, “Small”, “Standard” and “Large”.
The default is “Standard”.
Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can
change the font you want. The default is “Style 0”.
Foreground Color: This option consists of “Default”, “White”, “Black”,
“Red”, “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can
change the color of the letter. The default is “White”.
Background Color: This option consists of “Default”, “White”, “Black”,
“Red”, “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can
change the background color of the caption. The default is “Black”.
Foreground Opacity: This option consists of “Default”, “Transparent”,
“Translucent”, “Solid” and “Flashing”. You can change the opacity of the
letter.
Background Opacity: This option consists of “Default”, “Transparent”,
“Translucent”, “Solid” and “Flashing”. You can change the background
opacity of the caption.
Return to Default: This option sets each of “Size”, “Font Style”,
“Foreground Color”, “Background color”, “Foreground Opacity” and
“Background Opacity” to its default.
•
•
•
•
•
•
•
Press the CC button on the remote control to turn the Caption “On” or “Off”.
➣
➣
➣
➣
➣
➣
O
Setup
Time
V-Chip
Caption ►
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
Caption
Caption : Off ►
Caption Mode : Default
Digital Caption Options
ReturnEnter
Caption
Caption : Off
Caption Mode : Default
Digital Caption Options
ReturnEnter
Off
On
Move
Caption
Caption : Off
Caption Mode : Default
Digital Caption Options
ReturnEnter
Move
Default
Service 1
Service 2
Digital Caption Options
Size : Default
Font Style : Default
Foreground Color : Default
Background Color : Default
Foreground Opacity : Default
Background Opacity : Default
Return to Default
ReturnEnter
Move
Default
Small
Standard
Large
BN68-01392A-00ENG.indb 57 2008-02-21 ¿ÀÈÄ 9:04:18
English - 58
Adjusting the TV On/Off Melody Sound
A melody sound can be set to come on when the TV is powered On or Off.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “External Settings”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Melody”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”, then
press the ENTER button.
Off: Turns off the melody function.
Low: Sets the melody volume to low.
Medium: Sets the melody volume to medium.
High: Sets the melody volume to high.
•
•
•
•
Press the EXIT button to exit.
The Melody does not play
- When no sound is output from the TV because the MUTE button has been
pressed,
- When no sound is output from the TV because the volume has been
reduced to minimum with the VOL – button.
- When the TV is turned off by Timer function.
➣
Setting the Light Effect
You can turn the LED on the front of TV on/off.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “External Settings” then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Light Effect”, then press the
ENTER button.
Press the ▲ or ▼ button to select “Off”, “In Standby”, “When Watching TV” or
“Always”, then press the ENTER button.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
When Watching TV: Turns the LED on while watching TV.
Always: LED will come on after you turn the TV off.
•
•
•
•
Press the EXIT button to exit.
Set the “Light Effect” to “Off” to reduce power consumption.
➣
Setup
V-Chip
Caption
ExternalSettings ►
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody : Medium
Light Effect
Wall-Mount Adjustment
ReturnEnter
Move
Off
Low
Medium
High
Setup
V-Chip
Caption
ExternalSettings ►
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody : Medium
Light Effect : In Watching TV
Wall-Mount Adjustment
ReturnEnter
Move
Off
In Standby
When Watching TV
Always
LED
BN68-01392A-00ENG.indb 58 2008-02-21 ¿ÀÈÄ 9:04:19
English - 59
Setting the Entertainment mode
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and games.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Entertainment”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select “Off”, “Sports”, “Cinema” or “Game”, then
press the ENTER button.
Off: Switches the “Entertainment” function off.
Sports: Provides the optimal picture and sound quality for sports.
Cinema: Provides the optimal picture and sound quality for movie
watching. You can experience a richer picture and enhanced sound.
Game: Provides the optimal picture and sound quality for games. This
mode accelerates the playing speed when using an external game
console connected to the TV.
•
•
•
•
Press the EXIT button to exit.
If you set any of the three “Entertainment” modes to On, the settings will
be locked and can not be adjusted. If you want to make Picture and Sound
mode adjustments, the “Entertainment” mode must be turned off.
If you set any of the three “Entertainment” modes to On, “SRS TruSurround
XT” function is not available.
The “Entertainment” settings are saved for each input source.
You can press the E.MODE button on the remote control repeatedly to
change the “Entertainment” setting.
➣
➣
➣
O
Using the Energy Saving Feature
This feature adjusts the brightness of the TV in order to reduce power
consumption. When watching TV at night, set the "Energy Saving “ mode option to
“High” to reduce eye fatigue as well as power consumption.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Energy Saving”, then press the
ENTER button. Select the required option (Off, Low, Medium, High, Auto)
by pressing the ▲ or ▼ button.
Press the ENTER button.
Off: Turns off the energy saving function.
Low: Sets the TV to low energy saving mode.
Medium: Sets the TV to medium energy saving mode.
High: Sets the TV to high energy saving mode.
Auto: Automatically adjusts the brightness of the TV screen in
accordance with the scenes.
•
•
•
•
•
Press the EXIT button to exit.
Setup
Caption
External Settings
Entertainment : Off ►
Energy Saving : Off
PIP
SW Upgrade
Setup
Caption
External Settings
Entertainment : Off ►
Energy Saving : Off
PIP
SW Upgrade
Off
Sports
Cinema
Game
Setup
External Settings
Entertainment : Off
Energy Saving : Off ►
PIP
SW Upgrade
Setup
External Settings
Entertainment : Off
Energy Saving : Off ►
PIP
SW Upgrade
Off
Low
Medium
High
Auto
BN68-01392A-00ENG.indb 59 2008-02-21 ¿ÀÈÄ 9:04:20
English - 60
Upgrading the Software
Samsung may offer upgrades for TV's rmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by
connecting a USB drive to the USB port located on your TV.
1.
Insert a USB drive containing the rmware upgrade into the WISELINK port
on the side of the TV.
2.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
3. Press the ▲ or ▼ button to select “SW Upgrade”, then press the ENTER
button.
4.
Press the ENTER button.
The message “Scanning for USB... It may take up to 30 seconds.” is
displayed.
5.
The message “Upgrade version XXXX to version XXXX? The system will be
reset after upgrade.” is displayed.
Press the ◄ or ► to select the “OK”, then press the ENTER button.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically
after completing the rmware upgrade. Please check the rmware version
after the upgrades are complete. When software is upgraded, video and
audio settings you have made will return to their default (factory) settings. We
recommend you write down your settings so that you can easily reset them
after the upgrade.
Setup
Energy Saving : Off
PIP
SWUpgrade ►
Software Upgrade
Scanning for USB.....
It may take up to 30 seconds.
Software Upgrade
Upgrade version XXXX to version XXXX? The system will
be reset after upgrade.
OK
Cancel
HDMI IN3HDMI IN3
TV Side Panel
USB Drive
BN68-01392A-00ENG.indb 60 2008-02-21 ¿ÀÈÄ 9:04:20
English - 61
WISELINK
Using the WISELINK Function
Connecting a USB Device
This function enables you to view and listen to photo (JPEG) and audio les (MP3)
saved on a USB Mass Storage Class
(MSC) device.
1. Press the POWER button on the remote control or front panel.
The TV is powered on.
2.
Connect a USB device containing JPEG and/or MP3 les to the WISELINK
jack (USB jack) on the side of the TV.
If you enter the WISELINK mode with no USB device connected the message “No external storage device found.
Check the connection status.” will appear. In this case, insert the USB device, exit the screen by pressing the W.LINK
button on the remote control and enter the WISELINK screen again.
MTP (Media Transfer Protocol) is not supported.
The le system only supports FAT16/32 (The NTFS le system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Wiselink only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Before connecting your device to the TV, please back up your les to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data le damage or data loss.
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG les, while a PTP device supports JPEG les only.
The sequential jpeg format is supported.
Photo and audio les must be named in English, French or Spanish. If not, the les can not be played. Change the le
names to English, French or Spanish if necessary.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360x8640 pixels.
For unsupported or corrupted les, the “Not Supported File Format” message is displayed.
Using the Remote Control Button in WISELINK Menu
Button Operations
(▲/▼/◄/►) Move the cursor and select an item.
ENTER
Select the currently selected item.
During a Slide Show or Music Play:
- Pressing the ENTER
button during play pauses the play.
- Pressing the ENTER button during pause resumes the play.
/
Play or pause the Slide Show or Music le.
RETURN Return to the previous menu.
TOOLS Run various functions from the Photo and Music menus.
Stop the current slide show or Music le.
/
Jump to previous group / Jump to next group.
INFO Show le information.
W.LINK Exit WISELINK mode.
CH
/
PRE.CH / FAV.CH
Stop WISELINK mode and Returns to TV mode.
EXIT Stop the current function and return to the WISELINK main menu.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
HDMI IN3HDMI IN3
TV Side Panel
USB Drive
BN68-01392A-00ENG.indb 61 2008-02-21 ¿ÀÈÄ 9:04:22
English - 62
Using the WISELINK Menu
1.
Press the MENU button. Press the ▲ or ▼ button to select “Application”,
then press the ENTER button.
2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER
button.
The “WISELINK” menu is displayed.
Press the W.LINK button on the remote control to display the “WISELINK”
menu.
Press the SOURCE button on the remote control repeatedly to select
“USB”, then press the ENTER
button.
3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory Device (i.e. if connected
through a hub). Press the ENTER button.
This function differs depending on the USB Memory Device connected to TV.
The selected USB device name appears at the bottom left of the screen.
4.
Press the ◄ or ► button to select an icon (Photo, Music, Setup), then press the ENTER button.
To exit “WISELINK” mode, press the W.LINK button on the remote control.
➣
O
O
➣
➣
➣
Using the Photo List
This menu shows Photo les saved on an USB memory device.
Photo List
1.
Press the W.LINK button on the remote control to display the “WISELINK”
menu.
2.
Press the ◄ or ► button to select “Photo”, then press the ENTER
button.
Photo les are displayed.
This menu only shows les whose le extension is jpg. Files of other
formats such as bmp or tiff will not be displayed.
Press the
(Play) / ENTER button to start the Slide Show.
To move to the previous / next group, press the (REW) or
(FF) button.
When moving to a photo, loading may take a few seconds. At this
point, the loading icon will appear at the screen.
It make take some time to load photo les as Thumbnail images.
Photos without EXIF information may not be displayed as thumbnail
images in the Photo List depending on the picture quality and
resolution.
➣
➣
➣
➣
➣
➣
➣
WISELINK
Photo
SUM
Device
e
Exit
Music Setup
PHOTO
SUM
851.98MB/995.00MB Free
WISELINK
Photo
SUM
Device
e
Exit
Music Setup
PHOTO
SUM
851.98MB/995.00MB Free
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
BN68-01392A-00ENG.indb 62 2008-02-21 ¿ÀÈÄ 9:04:23
English - 63
Screen Display
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date :
Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
1File(s) Selected
2 6
1
3 4
75
1
Currently selected photo
Shows the currently selected photo.
2
Photo Information Window
Shows information about the currently selected photo. You can change the “Color”, “Composition”, and “Favorite”.
3
Current Sort Standard
Press the ▲ or ▼ button to change the standard for sorting photos. (“Monthly”, “T
imeline”, “Color”, “Composition”,
“Folder”, “Preference”)
The item that is selected as the sorting standing is highlighted in the Photo Information Window.
4
View Groups
Shows the sorting groups. The sorting group including the currently selected photo is highlighted.
5
Current Device
Shows the currently selected device name. Press the Red button to select a device.
6
Item Selection Information
Shows the number of photos that are selected by pressing the Yellow button.
7
Help Items
Red(Device) button: Selects a connected device.
Green(Favorites Setting) button: Changes the favorites setting for the selected photo. Press this button
repeatedly until the desired value appears. (Refer to page 66)
Yellow(Select) button: Selects photos from the photo list. Selected photos are marked with a symbol
on the left.
(Jump) button: Jumps to the previous sorting group / Jumps to the next sorting group.
TOOLS(Option) button: Displays the “Slide Show”, “Play Current Group”, “Delete”, “Change Group Info” (in “Color”
or “Composition” group),“Information” or “Safe Remove” menus.
•
•
•
•
•
BN68-01392A-00ENG.indb 63 2008-02-21 ¿ÀÈÄ 9:04:24
English - 64
Sorting Photo List
You can sort photos in the Photo List by a particular standard.
1.
Press the W.LINK button on the remote control to display the
“WISELINK” menu.
2.
Press the ◄ or ► button to select “Photo”, then press the ENTER
button.
Photo les are displayed.
3.
Press the ▲ or ▼ button to select a sorting standard.
(“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”)
The photos are sorted according to the newly selected sorting
standard.
4.
Press the ENTER button to start the Slide Show in the order selected
by the user.
Wiselink identies the color and composition of images and groups
them accordingly by analyzing the images on the USB device.
The “Composition” and “Color” information extracted from a photo le
may be different from what you selected.
Photo information is automatically set. You can change the “Color”,
“Composition”, and “Favorite”.
Photos for which information cannot be displayed are set as
“Unclassied”.
PTP does not support folder sort mode.
Monthly
Sorts photos by month.
It sorts and shows photos in the le by month. It sorts only by month
(from January to December) regardless of year.
1.
Select “Monthly” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
Month.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
Timeline
Sorts photos by time.
It sorts and shows photos by date. It sorts by year and month from the
earliest photo.
1.
Select “Timeline” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
Timeline.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Monthly
Timeline
Color
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
2008 2008
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
WISELINK
Photo
SUM
Device
Exit
Music Setup
PHOTO
SUM
851.98MB/995.00MB
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
BN68-01392A-00ENG.indb 64 2008-02-21 ¿ÀÈÄ 9:04:25
English - 65
Color
Sorts photos by color.
You can change the photo color information.
1.
Select “Color” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
color.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
Changing the color information
1.
Select “Color” as the sorting standard in the Photo List and press the
◄ or ► button to select a photo.
Changingtheinformationofmultipleles
Press the ◄ or ► button to select the desired photo in the Photo list.
Then press the yellow button.
Repeat the above operation to select multiple photos.
The mark appears to the left of the selected photo.
2.
Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Change Group Info”.
Press the ENTER button.
4. Press the ◄ or ► button to select the desired option, then press the
ENTER button.
The group information of the current le is updated and the le is
moved to the new group.
“Color” option: Red, Yellow, Green, Blue, Magenta, Black, Gray,
Unclassied.
Composition
Sorts photos by composition.
You can change the compositional information of photos.
1.
Select “Composition” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
compositon.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
Changing the composition information
1.
Select “Composition” as the sorting standard in the Photo List and press
the ◄ or ► button to select a photo.
Changingtheinformationofmultipleles
Press the ◄ or ► button to select the desired photo in the Photo list.
Then press the yellow button.
Repeat the above operation to select multiple photos.
The mark appears to the left of the selected photo.
2.
Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Change Group Info”.
Press the ENTER button.
4. Press the ◄ or ► button to select the desired option, then press the
ENTER button.
The group information of the current le is updated and the le is
moved to the new group.
“Composition” option:
(horizontal), (vertical), (object),
(perspective), (pattern), Unclassied
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Timeline
Color
Composition
▲
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Color
Composition
Folder
Unclassified
▲
Silde Show
Play Current Group
Delete
Change Group Info
▼
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Color
Composition
Folder
Unclassified
▲
Unclassified
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Timeline
Color
Composition
▲
Silde Show
Play Current Group
Delete
Change Group Info
▼
BN68-01392A-00ENG.indb 65 2008-02-21 ¿ÀÈÄ 9:04:27
English - 66
Folder
Sorts photos by folder.
If there are many folders in USB, the photos les are shown in order
in each folder. The photo le in the Root folder is shown rst and the
others are shown in alphabetical order by name.
1.
Select “Folder” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
folder.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
Preference
Sorts photos by preference. (Favorite)
You can change the photo preferences.
1.
Select “Preference” as the sorting standard in the Photo List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
preference.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button. Press the ▲ or ▼ button to select “Play
Current Group”.
4.
Press ENTER to play the selected group of photo les from the
sublist.
Changing the Favorites setting
1.
Press the ◄ or ► button to select the desired photo in the Photo list.
Changingtheinformationofmultipleles
Press the ◄ or ► button to select the desired photo in the Photo list.
Then press the yellow button.
Repeat the above operation to select multiple photos.
The mark appears to the left of the selected photo.
2.
Press the Green button repeatedly until the desired setting appears.
Favorites settings change completed.
“Favorite” option:
★ ★ ★
,
★ ★ ★
,
★ ★ ★
,
★ ★ ★
Users can select the number of stars (up to 3) according to their
preference.
➣
➣
➣
➣
➣
➣
➣
➣
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Composition
Folder
Preference
P-other Photo-1
▲
Silde Show
Play Current Group
Delete
Information
▼
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Folder
Preference
Monthly
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
▲
BN68-01392A-00ENG.indb 66 2008-02-21 ¿ÀÈÄ 9:04:28
English - 67
DeletingthePhotole
1. Press the ◄ or ► button to select the desired photo in the Photo list.
2. Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Delete”, then press the ENTER
button.
The “Selected File(s) : Delete this le?” message appear.
4.
Press the ◄ or ►button to select “OK”, then press the ENTER button.
The photo is deleted.
When a read-only le is deleted, the “Read-only le(s). Delete the
le(s)?” message appear.
If you select “Cancel”, the deletion is cancelled.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote
control.
You cannot remove the PTP-connected digital camera picture les.
While removing les, don’t remove the USB memory device.
You cannot recover a deleted photo le.
Deleting Multiple Photos
1.
Press the ◄ or ► button to select the desired photo in the Photo list.
Then press the yellow button.
Repeat the above operation to select multiple photos.
The
mark appears to the left of the selected photo.
2.
Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Delete selected File”, then press the
ENTER button.
The “Selected File(s) : Delete the selected le(s)?” message appear.
4.
Press the ◄ or ► button to select “OK”, then press the ENTER button.
The selected photos are deleted.
If you select “Cancel”, the deletion is cancelled.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote
control.
You cannot remove the read-only les from the selected ones.
You cannot recover a deleted photo le.
Viewing the Photo Information
The photo le information including the order of the le in the current directory,
the name, the size, the resolution, the date modied and the path is displayed.
1.
Press the ◄ or ► button to select the desired photo in the Photo list.
2. Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Information”, then press the ENTER
button.
The information on the selected photo appears.
Press the INFO button to viewing the information.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
Name : image_1.jpg
Size : 2.0MB
Resolution : 440x440
Date : Jan.1.2008
Path : /Photo/
OK
Photo Info
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Delete selected File
Deselect All
Safe Remove
2File(s) Selected
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
Delete
Cancel
OK
Selected File(s) : image... 2 File(s)
Delete the selected file(s)?
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
Delete
Cancel
OK
Selected File(s) : image... 1 File(s)
Delete this file?
BN68-01392A-00ENG.indb 67 2008-02-21 ¿ÀÈÄ 9:04:30
English - 68
Viewing a Photo or Slide Show
Viewing a Slide Show
1.
Press the W.LINK button on the remote control to display the “WISELINK”
menu.
2.
Press the ◄ or ► button to move to “Photo”, then press the ENTER
button.
Photo les are displayed.
3. Press the ◄ or ► button to select the desired photo in the Photo list.
4. Press the TOOLS button.
5.
Press the ▲ or ▼ button to select “Slide Show”, then press the
ENTER
button.
All les in the photo list will be used for the Slide Show.
During the slide show, les are displayed in order from the currently
shown le.
The Slide Show progresses in the order sorted in the Photo list.
Music les can be automatically played during the Slide Show if the
“Background Music” is set to “On”.
(Refer to page 70).
While a photo list is displayed, press the
(Play) / ENTER
button on the remote control to start slide show.
ToperformaSlideShowwithonlytheselectedles
1. Press the ◄ or ► button to select the desired photo in the Photo list.
Then press the yellow button. Repeat the above operation to select multiple photos.
The
mark appears to the left of the selected photo.
If you select one le, the SlideShow will not be performed.
2.
Press the (Play) / ENTER button.
The selected les will be used for the Slide Show.
If you have selected les, only the selected les will be used for the Slide Show
.
Playing current group
1.
Press the ▲ or ▼ button to select a sorting standard.
(“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”)
2.
Press the ◄ or ► button to select the desired photo in the Photo list.
To move to the previous / next group, press the (REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”, then press the
ENTER button. Only the photos in the sorting group including the
selected les will be used for the Slide Show.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote control.
Slide show function information icon (Displayed at the top left of the screen)
Icon Current OSD Function
► (Photo) SlideShow Photo Slide Show is in progress.
❙❙
Photo Pause
You can pause a Slide Show by pressing the
(Pause)/ENTER button
on the remote control during a Slide Show.
To resume the Slide Show, press the
(Play)/ENTER button on the
remote control again.
➣
➣
➣
➣
➣
O
➣
➣
➣
➣
➣
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
Photo
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
image_1.jpg
Month : Jan
Date : Jan.01.2008
Color : Gray
Composition :
Folder : P-other
Favorite :
★ ★ ★
Preference
Monthly
Timeline
Jan Nov
▲
Silde Show
Play Current Group
Delete
Information
▼
SUM
E
Pause
Previous
Next
TOOLS
Option
Return
►
20/22 image_1.jpg 440x440 2.0KB 2008/1/1
BN68-01392A-00ENG.indb 68 2008-02-21 ¿ÀÈÄ 9:04:31
English - 69
Viewing a photo
1.
Press the W.LINK button on the remote control to display the “WISELINK”
menu.
2.
Press the ◄ or ► button to move to “Photo”, then press the ENTER
button.
Photo les are displayed.
3.
Press the ◄ or ► button to select the desired photo in the Photo list.
Then Press the Yellow button to select only one le.
4.
Press the ENTER button over a photo icon.
The currently selected photo is displayed in full screen.
Using the option menu during a slide show (or Viewing a Photo)
1.
During a slide show(or viewing a photo), Press the TOOLS button to set the option.
2.
Press the ▲ or ▼ button to select the desired option. Then press the ENTER button.
Start Slide Show (or Stop Slide Show)
You can start or stop a Slide Show.
Press the ▲ or ▼ button to select “Start Slide Show” (or “Stop Slide Show”),
then press the ENTER
button.
Rotate
You can rotate images in full screen mode.
Press the ▲ or ▼ button to select “Rotate”, then press the ENTER
button.
Press the ◄ or ► button repeatedly to rotate the photo by the desired amount.
Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.
Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.
If you have select “Zoom”, the “Rotate” function is deactivate
The rotated le is not saved.
The Rotating function information icon is displayed at the top right of the
screen
Icon Current OSD Function
0˚
Rotating (0°)
This rotates a photo to its original
position
90˚
Rotating (90°) This rotates a photo by 90 degrees
180˚
Rotating (180°) This rotates a photo by 180 degrees
270˚
Rotating (270°) This rotates a photo by 270 degrees
➣
➣
➣
➣
➣
➣
➣
SUM
E
Slide Show
Previous
Next
TOOLS
Option
Return
20/22 image_1.jpg 440x440 2.0KB 2008/1/1
TOOLS
Stop Slide Show
Rotate
Zoom
Slide Show Speed : Normal
Background Music : Off
Background Music Setting
Picture Mode : Standard
Sound Mode : Custom
Information
EnterMove
Return
90˚
Rotate
BN68-01392A-00ENG.indb 69 2008-02-21 ¿ÀÈÄ 9:04:32
English - 70
Zoom
You can zoom into images in full screen mode.
Press the ▲ or ▼ button to select “Zoom”, then press the ENTER
button.
Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect.
(x1 → x2 → x4)
To move the enlarged photo image, press the ENTER
button, then press
the ▲/▼/◄/► buttons.
Note that when the enlarged picture is smaller than the original screen
size, the location change function doesn’t work.
The enlarged le is not saved.
If you have select “Rotate”, the “Zoom” function is deactivate
Zoom function information icon is displayed at the top right of the screen.
Icon Current OSD Function
x2
Zoom (x 2) Zoom-into a photo at 2x.
x4
Zoom (x 4) Zoom-into a photo at 4x.
x1
Zoom (x 1) Restore a photo to its original size.
Pan Down
Pan down to view the lower part of a
zoomed-in photo.
Pan Up
Pan up to view the upper part of a
zoomed-in photo.
Pan Right
Pan right to view the right side of a
zoomed-in photo.
Pan Left
Pan left to view the left side of a
zoomed-in photo.
Slide Show Speed
You can select the slide show speed.
Press the ▲ or ▼ button to select “Slide Show Speed”.
Press the ◄ or ► button to select the desired option. (Fast → Slow → Normal)
You can select the SlideShow speed only during a slide show.
Background Music
If you set ”Background Music” to On, the background music will be played
when viewing photos one by one or in a Slide Show.
Press the ▲ or ▼ button to select “Background Music”.
Press the ◄ or ► button to select “On” or “Off”.
If you set ”Background Music” to On, a screen appears immediately where
you can set the Background Music.
On: When the background music is available, if you select On, the music
is played back. To use this feature, there must be music and photo les
stored on the USB device.
Off: Background music is not played.
•
•
➣
➣
➣
➣
➣
➣
X2
Zoom
X2
n
Move
Enter Return
TOOLS
Stop Slide Show
Rotate
Zoom
Slide Show Speed : Normal
Background Music ◄ Off ►
Background Music Setting
Picture Mode : Standard
Sound Mode : Custom
Information
Move Return
Adjust
TOOLS
Stop Slide Show
Rotate
Zoom
Slide Show Speed ◄ Normal ►
Background Music : Off
Background Music Setting
Picture Mode : Standard
Sound Mode : Custom
Information
Move Return
Adjust
BN68-01392A-00ENG.indb 70 2008-02-21 ¿ÀÈÄ 9:04:32
English - 71
Background Music Setting
You can set the background music.
Press the ▲ or ▼ button to select “Background Music Setting”, then press the
ENTER
button.
If you turn off the “Background Music”, even if the “Background Music
Settings” have been set up, the background music will not be played.
Loading music les is needed to change BGM mode. Play music les in
music category to load.
“Background Music setting” menu is displayed.
Press the ◄ or ► button to select the desired BGM (Background music)
mode. (Shufe, Selected le, Mood)
Shufe: Plays music les in random order.
Selectedle: Plays a selected music le.
Mood: Plays music les of a particular mood only.
•
•
•
Selectigthebackgroundmusicle
Press the ◄ or ► button to set “BGM Mode” to “Selected le”.
Press the ▲ or ▼ button to select “Selected Music File”, then press the
ENTER button.
Press the ▲ or ▼ button to select a music le, then press the yellow
button.
The mark appears to the left of the selected music.
Repeat the above operation to select multiple music les.
Press the ENTER button.
Selectingthebackgroundmusiclemood
Press the ◄ or ► button to set “BGM Mode” to Mood”.
Press the ▲ or ▼ button to select “BGM Mood”. Then press ◄ or ►
button to select the desired BGM mood. Press the ENTER button.
BGM mode option: Energetic, Rhythmical, Sad, Exciting, Calm
WISELINK identies the mood of the music les and groups them
accordingly by analyzing the music les on the USB device.
Picture Mode
You can set the Picture mode. (Refer to page 18)
Sound Mode
You can set the Sound mode. (Refer to page 29)
Safe Remove
You can remove the device safely from the TV.
Press the ▲ or ▼ button to select “Safe Remove”, then press the ENTER
button.
The “Safely removing USB device.” message appears and then the “USB device can now be safely removed from TV.”
appears.
Remove the USB device from the TV.
➣
➣
➣
➣
➣
➣
Background Music setting
BGM Mode ◄ Shuffle ►
BGM Mood : Calm
Select Music File
ReturnEnter
Adjust
Move
TOOLS
Stop Slide Show
Rotate
Zoom
Slide Show Speed : Normal
Background Music : Off
Background Music Setting
Picture Mode : Standard
Sound Mode : Custom
Information
EnterMove
Return
Background Music setting
BGM Mode ◄ Selected file ►
BGM Mood : Calm
Select Music File
ReturnEnter
Move
Background Music setting
Return
Enter
Move
Select
../Music/ 2 File(s) Selected
Music
Thanks
I Love You
Better than yesterday
▼
Background Music setting
BGM Mode : Mood
BGM Mood ◄ Calm ►
Select Music File
ReturnEnter
Adjust
Move
BN68-01392A-00ENG.indb 71 2008-02-21 ¿ÀÈÄ 9:04:33
English - 72
Using the Music List
This menu shows MP3 les from among the les saved on a USB memory device.
1.
Press the W.LINK button on the remote control to display the “WISELINK”
menu.
2.
Press the ◄ or ► button to select “Music”, then press the ENTER
button.
Music les are displayed.
Press the
(Play) / ENTER button over a music icon to play
the music.
To move to the previous / next group, press the
(REW) or
(FF) button.
Screen Display
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Blues
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
G H I J
L P S T V
▲
1File(s) Selected
1
64
5
2 3
1
Currently se lected music
Shows the currently selected music.
2
Current Sort Standard
Press the ▲ or ▼ button to change the standard for sorting music les. (“Title”, “Artist”, “Mood”, “Genre”, “Folder”,
“Preference”)
3
View Groups
Shows the sorting groups. The sorting group including the currently selected music le is highlighted.
4
Current Device
Shows the currently selected device name. Press the Red button to select a device.
➣
➣
➣
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
WISELINK
Photo
SUM
Device
e
Exit
Music Setup
MUSIC
SUM
851.98MB/995.00MB Free
BN68-01392A-00ENG.indb 72 2008-02-21 ¿ÀÈÄ 9:04:33
English - 73
Sorting Music List
You can sort music les in the Music List by a particular standard.
1.
Press the W.LINK button on the remote control to display the WISELINK
menu.
2.
Press the ◄ or ► button to select “Music”, then press the ENTER
button.
Music les are displayed.
3.
Press the ▲ or ▼ button to select a sorting standard.
(“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”)
Music les are sorted according to the newly selected sorting
standard.
4.
Press the ENTER button to start playing music in the order selected by
the user.
Music information is set automatically and you can change the
Favorite information.
Music les for which information cannot be displayed are set to
“Unclassied”.
If there is no title information for a music le, the lename is displayed.
If no information is available for the Genre, Artist, Album, or Year, the
corresponding item is displayed as blank.
Title
Sorts music les by the title.
It sorts the Music titles in alphabetical order, and shows the music le.
1.
Select “Title” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped in
alphabetical order.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
➣
➣
➣
➣
➣
➣
➣
➣
5
Item Selection Information
Shows the number of music les that are selected by pressing the Y
ellow button.
6
Help Items
Red(Device) button: Selects a connected device.
Green(Favorites Setting) button: Changes the favorites setting for the selected music. Press this button
repeatedly until the desired value appears. (Refer to page 75)
Yellow(Select) button: Selects music les from the music list. Selected music les are marked with a symbol
on
the left.
(Jump) button: Jumps to the previous sorting group / Jumps to the next sorting group.
TOOLS(Option) button: Displays the “Play Current Group”, “Delete”, “Change Group Info” (in “Mood” group),
“Information” or “Safe Remove” menus.
•
•
•
•
•
WISELINK
Photo
SUM
Device
e
Exit
Music Setup
MUSIC
SUM
851.98MB/995.00MB Free
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Play Current Group
Delete
Information
Safe Remove
BN68-01392A-00ENG.indb 73 2008-02-21 ¿ÀÈÄ 9:04:34
English - 74
Artist
Sorts music les by the artist.
It sorts the music le by artist in alphabetical order.
1.
Select “Artist” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped in
alphabetical order.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
Mood
Sorts music les by the mood.
You can change the music mood information.
1.
Select “Artist” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
mood.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
Changing the Mood information
1.
Select “Mood” as the sorting standard in the Music List and press the
◄ or ► button to select a music le.
2.
Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Change Group Info”. Press the
ENTER button.
Wiselink identies the mood of the music les and groups them
accordingly by analyzing the music les on the USB device.
“Mood” information extracted from a music le may not always match
the Mood option. For example, a le you think is “Energetic” may be
extracted to the “Exciting” mood option.
4.
Press the ◄ or ► button to select the desired option, then press the
ENTER button.
The group information of the current le is updated and the le is
moved to the new group.
“Mood” options: Energetic, Rhythmical, Sad, Exciting, Calm,
Unclassied
➣
➣
➣
➣
➣
➣
➣
➣
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Artist
Mood
Genre
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
Rhythmical Sad Exciting Calm ...
▲
Play Current Group
Delete
Change Group Info
Information
▼
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Artist
Mood
Genre
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
Rhythmical Sad Exciting Calm ...
▲
Energetic Rhythmical Sad Exciting Calm Unclassified
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Title
Artist
Mood
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
Catherine Darby Darby Darby Darby Jee Jee
▲
Play Current Group
Delete
Information
Safe Remove
BN68-01392A-00ENG.indb 74 2008-02-21 ¿ÀÈÄ 9:04:34
English - 75
Genre
Sorts music les by the genre.
1.
Select “Genre” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
Genre.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
Folder
Sorts music les by the folder.
If there are many folders in USB, the les are shown in order in each
folder. The music le in the Root folder is shown rst and the others are
shown in alphabetical order by name.
1.
Select “Folder” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
Folder.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
Preference
Sorts music les by preference. (Favorite)
You can change the music les preferences.
1.
Select “Preference” as the sorting standard in the Music List.
2. Press the ◄ or ► button to select from the sublist of les grouped by
Preference.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the TOOLS button.
4.
Press the ▲ or ▼ button to select “Play Current Group”.
5. Press ENTER to play the selected group of music les from the
sublist.
Changing the Favorites setting
1.
Press the ◄ or ► button to select the desired music in the music list.
Changingtheinformationofmultipleles
Press the ◄ or ► button to select the desired music in the music list.
Then press the yellow button.
Repeat the above operation to select multiple musics.
The
mark appears to the left of the selected music.
2.
Press the Green button repeatedly until the desired setting appears.
Favorites settings change completed.
“Favorite” option:
★ ★ ★
,
★ ★ ★
,
★ ★ ★
,
★ ★ ★
Users can select the number of stars (up to 3) according to their
preference.
3.
Press the ENTER button to start playing music.
➣
➣
➣
➣
➣
➣
➣
➣
➣
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Genre
Folder
Preference
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
Other Music Other2
▲
Play Current Group
Delete
Information
Safe Remove
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Mood
Genre
Folder
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
Other Pop R&B Soundtr... Top 40 Acid Jazz Ball..
▲
Play Current Group
Delete
Information
Safe Remove
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Folder
Preference
Title
Sad ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Exciting ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
▲
BN68-01392A-00ENG.indb 75 2008-02-21 ¿ÀÈÄ 9:04:35
English - 76
DeletingtheMusicle
1. Press the ◄ or ► button to select the desired music le in the music list.
2. Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Delete”, then press the ENTER
button.
The (for example) “Selected File(s) : Delete this le?” message
appear.
4.
Press the ◄ or ► button to select “OK”, then press the ENTER button.
The music is deleted.
When a read-only le is deleted, the “Read-only le(s). Delete the
le(s)?” message appear.
If you select “Cancel”, the deletion is cancelled.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote
control.
While removing les, don’t remove the USB memory device.
You cannot recover deleted music les.
DeletingMultipleMusicles
1. Press the ◄ or ► button to select the desired music in the music list.
Then press the yellow button.
Repeat the above operation to select multiple music les.
The
mark appears to the left of the selected music les.
2.
Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Delete selected File”, then press the
ENTER button.
The (for example) “Selected File(s) : Delete the selected le(s)?”
message appear.
4.
Press the ◄ or ► button to select “OK”, then press the ENTER button.
The selected music les are deleted.
If you select “Cancel”, the deletion is cancelled.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote
control.
You cannot remove the read-only les from the selected ones.
You cannot restore the deleted music les.
Viewing the Information
The music le information including the order of the le in the current directory,
the name, the size, the date modied and the path is displayed.
1.
Press the ◄ or ► button to select the desired music in the music list.
2. Press the TOOLS button.
3.
Press the ▲ or ▼ button to select “Information”, then press the ENTER
button.
The information on the selected le appears.
Press the INFO button to viewing the information.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
Name : I Love You.mp3
Size : 5.2MB
Date : Jan.1.2008
Path : /Music/
OK
Music Info
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Play Current Group
Delete
Information
Safe Remove
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
1File(s) Selected
Delete selected File
Deselect All
Safe Remove
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Play Current Group
Delete
Information
Safe Remove
Delete
Cancel
OK
Selected File(s) :I Love Y... 1 File(s)
Delete this file?
Delete
Cancel
OK
Selected File(s) :I Love Y... 2 File(s)
Delete the selected file(s)?
BN68-01392A-00ENG.indb 76 2008-02-21 ¿ÀÈÄ 9:04:36
English - 77
Playing a Music File
Playingamusicle
1. Press the W.LINK button on the remote control to display the “WISELINK”
menu.
2.
Press the ◄ or ► button to select “Music”, then press the ENTER
button.
Music les are displayed.
3.
Pressing the ◄ or ► button to select a music le to be played, then press
the ENTER button.
This menu only shows les with the MP3 le extension. Files with
other le extensions are not displayed, even if they are saved on the
same USB device.
Press the
(Play) / ENTER button over a music icon to play
the music.
(REW) or (FF) buttons do not function during play.
Press the (Pause) / ENTER button while playing a music le
to pause the le. Press the (Stop) button to exit Play mode.
The selected le is displayed at the top with its playing time.
To adjust the music volume, press the VOL – or VOL + button on the
remote control. To mute the sound, press the MUTE button on the
remote control.
The playing duration of a music le may be displayed as ‘00:00:00’ if
its playing time information is not found at the start of the le.
4.
To exit “WISELINK” mode, press the W.LINK button on the remote control.
Playing the music group
1.
Press the W.LINK button on the remote control to display the WISELINK
menu.
2.
Press the ◄ or ► button to select “Music”, then press the ENTER
button.
To move to the previous / next group, press the
(REW) or
(FF) button.
3. Press the ◄ or ► button to select the desired music le.
4. Press the TOOLS button.
5.
Press the ▲ or ▼ button to select “Play Current Group”, then press the
ENTER button.
The music les in the sorting group including the selected le are played.
6.
To exit “WISELINK” mode, press the W.LINK button on the remote control.
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
SUM
Pause
Previous
Next
TOOLS
Option
Return
7/14 00:01:15 00:05:41
I Love You
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
Play Current Group
Delete
Information
Safe Remove
BN68-01392A-00ENG.indb 77 2008-02-21 ¿ÀÈÄ 9:04:37
English - 78
Playingtheselectedmusicles
1. Press the W.LINK button on the remote control to display the WISELINK
menu.
2.
Press the ◄ or ► button to select “Music”, then press the ENTER
button.
3.
Press the ◄ or ► button to select the desired music le, then press the
yellow button. Repeat the above operation to select multiple music les.
The
mark appears to the left of the selected music le.
4.
Press the (Play) / ENTER button.
Only the selected le is played.
Press the
(Stop) button while playing to stop the current item and
to return to the music list.
5.
To exit “WISELINK” mode, press the W.LINK button on the remote
control.
Music function information icon (Displayed at the top left of the screen)
Icon Current OSD Function
(Music) Repeat
When all music les in the folder(or the selected le) are repeated.
“Repeat Mode” is “On”.
(Music) Once
When all music les in the folder(or the selected le) are played once.
“Repeat Mode” is “Off”.
► / ❙❙ (Music) Play/Pause
When pressing the
(Play)/ (Pause)/ENTER button on the
remote control while music is playing.
Repeating Music Play
1.
While a Music le is playing, press the TOOLS button.
2.
Press the ▲ or ▼ button to select “Repeat Mode”.
3. Press the ◄ or ► button to select “On” or “Off”.
On: Plays back all music les in the folder(or the selected le)
repeatedly.
Off: Doesn’t play back repeatedly.
•
•
4. To exit “WISELINK” mode, press the W.LINK button on the remote
control.
➣
➣
➣
Music
SUM
Device
Favorites Setting
Select
Jump
TOOLS
Option
Preference
Title
Artist
Energetic ★ ★ ★
Jee
Album 1
2005
Pop
Thanks
Sad ★ ★ ★
Darby
Album 2
2005
Pop
I Love You
Calm ★ ★ ★
Catherine
Album 3
2005
Pop
Better than yesterday
F G H I J L P S T V
▲
2File(s) Selected
SUM
Pause
Previous
Next
TOOLS
Option
Return
7/14 00:01:15 00:05:41
I Love You
TOOLS
Repeat Mode
◄ On ►
Picture Mode : Standard
Sound Mode : Custom
Information
Safe Remove
EnterAdjust
Move
BN68-01392A-00ENG.indb 78 2008-02-21 ¿ÀÈÄ 9:04:38
English - 79
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1.
Press the W.LINK button on the remote control to display the WISELINK
menu.
2.
Press the ◄ or ► button to select “Setup”, then press the ENTER
button.
3.
Press the ▲ or ▼ button to select the desired option.
(Slide Show Speed, Music Repeat Mode, Screen Saver Run Time,
Information, Safe Remove)
4.
Press the ◄ or ► button to select the option, then press the ENTER
button.
Slide Show Speed
Select to control the slide show speed.
Press the ▲ or ▼ button to select “Slide Show Speed”.
Press the ◄ or ► button to select “Fast”, “Normal” or “Slow”.
Music Repeat Mode
Select to repeatedly play music les.
Press the ▲ or ▼ button to select “Music Repeat Mode”.
Press the ◄ or ► button to select “On” or “Off”.
Screen Saver Run Time
Select to set the waiting time before the screen saver appears.
Press the ▲ or ▼ button to select “Screen Saver Run Time”.
Press the ◄ or ► button to select “1 min”, “3 min” or “5 min”.
Information
Select to viewing the information of the connected device.
Press the ▲ or ▼ button to select “Information”, then press the ENTER
button.
Safe Remove
You can remove the device safely from the TV. (Refer to page 71)
To exit WISELINK mode, press the W.LINK button on the remote control.
WISELINK
Photo
SUM
Device
e
Exit
Music Setup
SETUP
SUM
851.98MB/995.00MB Free
Setup
SUM
Device
Move Adjust
Return
Slide Show Speed ◄ Normal ►
Music Repeat Mode On
Screen Saver Run Time 5 min
Information
Safe Remove
Setup
SUM
Device
Move Adjust
Return
Slide Show Speed Normal
Music Repeat Mode ◄ On ►
Screen Saver Run Time 5 min
Information
Safe Remove
Setup
SUM
Device
Move Adjust
Return
Slide Show Speed Normal
Music Repeat Mode On
Screen Saver Run Time ◄ 5 min ►
Information
Safe Remove
Device Type : USB
Device : SUM
Available Memory : 852.90MB
Total Memory : 995.00MB
OK
Information
BN68-01392A-00ENG.indb 79 2008-02-21 ¿ÀÈÄ 9:04:38
English - 80
What is Anynet
+
?
Anynet
+
is a function that enables you to control all connected Samsung devices that support Anynet
+
with your Samsung
TV’s remote.
About Anynet
+
Connecting Anynet
+
Devices
The Anynet
+
system can be used only with Samsung devices that have the Anynet
+
feature. To be sure your Samsung
device has this feature, check if there is an Anynet
+
logo on it.
To connect to a TV
TV
Anynet
+
Device 1 Anynet
+
Device 2 Anynet
+
Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet
+
device using an HDMI
cable.
To connect to Home Theater
TV
Anynet
+
Device 1 Anynet
+
Device 2
Anynet+ Device 3
HDMI 1.3 Cable
HDMI 1.3 Cable
HDMI 1.3 Cable
Optical Cable
Home Theater
HDMI 1.3 Cable
1. Connect the
[HDMI 1], [HDMI
2] or [HDMI 3]
jack on the TV
and the HDMI
OUT jack of the
corresponding
Anynet
+
device
using an HDMI
cable.
2. Connect the
HDMI IN jack of
the home theater
and the HDMI
OUT jack of the
corresponding
Anynet
+
device
using an HDMI
cable.
Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the
Home Theater.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to
the Ampli er or Home Theater, not the TV.
Connect only one Home Theater.
You can connect an Anynet
+
device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet
+
functions.
Anynet
+
works when the AV device supporting Anynet
+
is in the Standby or On status.
Anynet
+
supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
➣
➣
➣
➣
➣
➣
BN68-01392A-00ENG.indb 80 2008-02-21 ¿ÀÈÄ 9:04:40
English - 81
Setting Up Anynet
+
The following settings help set the Anynet
+
functions.
To use the Anynet+ Function, Anynet
+
(HDMI-CEC) must be set to On
1.
Press the MENU button. Press the ▲ or ▼ button to select “Application”,
then press the ENTER button.
2. Press the ▲ or ▼ button to select “Anynet
+
(HDMI-CEC)”, then press the
ENTER
button.
3. Press the ENTER button to select “Anynet
+
(HDMI-CEC)”.
4.
Press the ▲ or ▼ button to select “On”, then press the ENTER button.
The “Anynet
+
(HDMI-CEC)” function is enabled.
If you select Off, “Anynet
+
(HDMI-CEC)” is disabled.
When the “Anynet
+
(HDMI-CEC)” function is disabled, all the Anynet
+
related operations are deactivated.
Setting an Anynet
+
Device to turn Off Automatically when the TV is Turned Off
1.
Press the ▲ or ▼ button to select “Auto Turn Off”, then press the ENTER
button.
2.
Press the ▲ or ▼ button to select “Yes”, then press the ENTER button.
The “Auto Turn Off” function is enabled.
If you select “No”, the “Auto Turn Off” function is canceled.
Press the EXIT button to exit.
The active source on the TV remote must be set to TV to use the Anynet
+
function.
If you set “Auto Turn Off” to “Yes”, connected external devices are also turned
off when the TV is turned off. If an external device is still recording, it may or
may not turn off.
➣
➣
➣
➣
➣
➣
➣
Scanning and Switching between Anynet
+
Devices
1. Press the TOOLS button.
Press the ▲ or ▼ button to select “Device List”, then press the ENTER button.
Anynet+ devices connected to the TV are listed.
If you cannot nd a device you want, press the red button to scan for devices.
2.
Press the ▲ or ▼ button to select to a particular device and press the ENTER
button. It is switched to the selected device.
Only when you set “Anynet
+
(HDMI-CEC)” to On in the “Application” menu, the
“Device List” menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when
the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search
devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make
sure to switch to an Anynet+ device by using the TOOLS button.
➣
➣
➣
➣
➣
➣
➣
➣
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) : ON
Auto Turn Off :
Off
On
Return
Enter
Move
Application
WISELINK
Anynet+(HDMI-CEC) ►
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC) : On
Auto Turn Off :
No
Yes
ReturnEnterMove
TOOLS
Device List
Record
Timer Recording
Receiver : Off
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
▼
e
Exit
EnterMove
BN68-01392A-00ENG.indb 81 2008-02-21 ¿ÀÈÄ 9:04:41
English - 82
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected to the TV.
Anynet
+
Menu Description
View TV Switches from Anynet
+
to TV broadcast mode.
Device List Displays the Anynet
+
device list.
Record Starts a recording. (This menu works only for a device supporting recording.)
Menu on Device Shows the menu of the connected device.
Example: When a DVD Recorder is connected, the DVD Recorder’s title menu
appears.
Device Operation Shows the play control menu of the connected device.
Example: When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Timer Recording Allows reserving a recording. (This menu works only for a device supporting
recording reservations.)
Stop Recording Stops recording.
Receiver Sound is output through the receiver (home theater).
Setup You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for
using Anynet+.
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
Anynet
+
Device
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Numeric buttons
▲/▼/◄/►/ENTER
buttons
Color buttons / EXIT button
After switching to the device, while
playing a le
(Backward search) / (Forward search)
(Stop) / (Play) / (Pause)
Device with built-in Tuner
After switching to the device, when you
are watching a TV program
CH
/ CH button
Audio Device When Receiver is activated VOL –/ VOL +/ MUTE button
The Anynet
+
function only works when the active source on the TV remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet
+
devices only using the TV
remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet
+
device.
The Anynet
+
functions do not operate with other manufacturers’ products.
The
, operations may differ depending on the device.
➣
➣
➣
➣
➣
➣
Recording
You can make a recording of a TV program using a Samsung recorder.
1.
Press the TOOLS button.
2.
Press the ▲ or ▼ button to select Recording Immediately and press the ENTER
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTER
button. Recording begins.
When the recording device is not displayed
Select “Device List” and press the red button to search devices.
Press the EXIT button to exit.
You can record the source streams by selecting “Record” after pressing the TOOLS button.
Pressing the
button will record whatever you are currently watching. If you are watching video from another
device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect
an antenna to a recording device, refer to the recording device’s users manual.
➣
➣
➣
TOOLS
Device List
Record
Timer Recording
Receiver : Off
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
▼
e
Exit
EnterMove
BN68-01392A-00ENG.indb 82 2008-02-21 ¿ÀÈÄ 9:04:41
English - 83
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1.
Press the TOOLS button. Press the ▲ or ▼ button to select “Receiver”.
2.
Press the ◄ or ► button to select to “On”.
Now you can listen to sound through the receiver.
3.
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the Optical IN jack of the
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected
to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
When using the WISELINK feature, sound may not output properly through the receiver.
When listening through the receiver, there are restrictions for using the PIP and audio-related (MTS, Preferred
language) menus.
If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a
power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page 32)
➣
➣
➣
➣
➣
➣
Troubleshooting for Anynet
+
Symptom Solution
Anynet
+
does not work. Check if the device is an Anynet+ device. The Anynet
+
system supports Anynet
+
devices only.
Connect only one receiver (home theater).
Check if the Anynet
+
device power cord is properly connected.
Check the Anynet
+
device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet
+
exclusive remote control.
Anynet
+
doesn’t work in certain situations. (Searching channels, Operating
WISELINK, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or turn your TV off and on again.
Check if the Anynet
+
Function of Anynet
+
device is set on.
•
•
•
•
•
•
•
•
•
•
I want to start Anynet
+
. Check if the Anynet
+
device is properly connected to the TV and check if the
Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
Setup menu.
Press the TV button on the TV remote control to switch to TV. Then press the
TOOLS button to show the Anynet
+
menu and select a menu you want.
•
•
I want to exit Anynet
+
. Select View TV in the Anynet
+
menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet
+
devices.
Press CH, CH LIST, PRE-CH, and FAV.CH to change the TV mode.
(Note that the channel button operates only when a tuner-embedded Anynet
+
device is not connected.)
•
•
•
The message Connecting to
Anynet
+
device... appears on the
screen.
You cannot use the remote control when you are conguring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet
+
setting or switching to view mode is
complete.
•
•
The Anynet
+
device does not play. You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
Check whether or not the device supports Anynet
+
functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup menu.
Search Anynet
+
devices again.
You can connect an Anynet
+
device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet
+
functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI cable
or power cord or a power failure, please repeat the device scan.
•
•
•
•
•
•
The TV program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
TOOLS
Device List
Record
Timer Recording
Receiver ◄ Off ►
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Add to Favorite
▼
e
Exit
Move
Adjust
BN68-01392A-00ENG.indb 83 2008-02-21 ¿ÀÈÄ 9:04:42
English - 84
Troubleshooting
If the TV seems to have a problem, rst try this list of possible problems and solutions. If none of these troubleshooting tips
apply, call Samsung customer service at 1-800-SAMSUNG.
Problem Possible Solution
Poor picture. Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality. Try another channel.
Adjust the antenna.
No picture or sound. Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low at
maximum volume.
First, check the volume of units connected to your TV (digital broadcasting
receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Picture rolls vertically. Check all wire connections.
The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on. Make sure the wall outlet is working.
Remote control malfunctions. Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable” message. Ensure that the signal cable is rmly connected to the PC source.
“Not Supported Mode” message. Check the maximum resolution and connected device’s Video frequency.
Compare these values with the data in the Display Modes.
Digital broadcasting screen problem. Please check the digital signal strength and input antenna.
The image is too light or too dark. Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Black bars on the screen. Make sure the broadcast you’re receiving is High Denition (HD).
HD channels sometimes broadcast Standard Denition (SD) programming,
which can cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or Pink tint. Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working. If you are using a Cable/Satellite box, you must set Closed Captioning on the
box, not your TV.
Snowy picture. Your cable box may need a rmware upgrade. Please contact your Cable
company.
Ghosting on picture. This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
Horizontal bars appear to icker, jitter
or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to icker, jitter or
shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power indicator
light blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Appendix
BN68-01392A-00ENG.indb 84 2008-02-21 ¿ÀÈÄ 9:04:42
English - 85
Problem Possible Solution
Image is not stable and may appear
to vibrate when you have a computer
connected to the PC input.
If the setting is not correct, use your computer utility program to change the
display settings.
Your TV supports multiscan display functions within the following
frequency domain:
Horizontal frequency (kHz) 30~60
Vertical frequency (Hz) 60~75
PC Maximum refresh rate (at 60 Hz) 1920 x 1080
➣
Image is not centered on the screen. Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
digital signal.
The picture appears distorted in the
corner of the screen.
If “Just Scan” is selected with some external devices, the picture may appear
distorted in the corner of the screen. This symptom is caused by the external
devices, not TV.
The “Resets all settings to the default
values.” message appears.
This appears when you press and hold the EXIT button for a while. The product
settings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
BN68-01392A-00ENG.indb 85 2008-02-21 ¿ÀÈÄ 9:04:42
English - 86
Installing the Stand
1. Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when attaching it.
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the
upper left of right sides of the TV.
2.
Fasten two screws at position 1 and then fasten two screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
➣
➣
➣
➣
Disconnecting the Stand
1. Remove four screws from the back of the TV.
2. Separate the stand from the TV.
Two or more people should carry the TV.
3.
Cover the bottom hole with the cover.
➣
BN68-01392A-00ENG.indb 86 2008-02-21 ¿ÀÈÄ 9:04:43
English - 87
Auto Wall-Mount Adjustment (Sold separately)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable
(Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Wall Mount Adjustment screen is displayed.
If the Wall Mount Adjustment screen is not displayed when clicking on
a direction button while watching your TV, use the menu to display that
screen.
Press the MENU button to display the menu. Press the ▲ or ▼ button to select
“Setup”, then press the ENTER
button.
Press the ▲ or ▼ button to select “External Settings”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the
ENTER
button.
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to select “Yes”,
then press the ENTER
button. The position is initialized to the default
setting.
3. Press the Blue button.
Press the ▲ and ▼ buttons to select a save mode from either Position 1,
Position 2 or Position 3 in order to save the current position.
To not save the current position, press the RETURN button.
When selecting a save mode, you cannot use the Color buttons.
4. Press the ENTER
button to save.
When Position1 is selected, the message “Current position saved as
Position1” is displayed.
5. Press the ENTER
button.
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
2. Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to
the saved position.
You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2)
or Yellow (Position 3) buttons.
If you adjust the position after moving to a pre-set position, the position display will disappear.
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized
installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building
materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ or WISELINK is operating.
LN37A550P3F, LN40A550P3F and LN46A550P3F models are not compatible with the older wall mount model
(WMN5090A).
➣
➣
•
•
•
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Setup
V-Chip
Caption
ExternalSettings ►
Entertainment : Off
Energy Saving : Off
PIP
SW Upgrade
External Settings
Melody :
Medium
Light Effect :
When Watching TV
Wall-Mount Adjustment
ReturnEnter
Move
Save
Select a mode to Save.
Position1
Position2
Position3
Adjust Enter Return
Wall-Mount Adjusment
Adjust Save Center
INFO
1 2 3Position
Wall-Mount Adjusment
Adjust Save Center
INFO
1 2 3
Position1
Position
BN68-01392A-00ENG.indb 87 2008-02-21 ¿ÀÈÄ 9:04:44
English - 88
WallMountKitSpecications(VESA)
Install your wall mount on a solid wall perpendicular to the oor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inches VESA Spec. (A * B) Standard Screw Quantity
LCD-TV
23~ 26 200 * 100 M4
4
32 ~ 40 200 * 200 M6
46 ~ 52 600 * 400
M8
57
700 * 400
(No VESA)
57 ~ 70 800 * 400
80 ~ 1400 * 800
PDP-TV
42 ~ 50 600 * 400
M8
4
55 ~ 70 800 * 400
63 No VESA 6
80 ~ 1400 * 800 4
Standard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specications, the length of the screws may differ
depending on their specications.
Do not use screws that do not comply with the VESA standard screw specications.
Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or
the consumer fails to follow the product installation instructions.
Our 57” and 63” models do not comply with VESA Specications. Therefore, you should use our dedicated wall mount
kit for this model.
Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
➣
➣
➣
➣
➣
➣
➣
➣
BN68-01392A-00ENG.indb 88 2008-02-21 ¿ÀÈÄ 9:04:45
English - 89
Using the Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically x the system when using it in a public place. The appearance and
locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the
Kensington Lock for proper use. The locking device has to be purchased separately.
<Optional>
Figure 2
Figure 1
Cable
The location of the Kensington Lock may be different depending on its model.
➣
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction
(Figure 2).
2.
Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy stationary object.
BN68-01392A-00ENG.indb 89 2008-02-21 ¿ÀÈÄ 9:04:45
English - 90
Specications
Model Name LN32A550P3F LN37A550P3F LN40A550P3F
Screen Size
(Diagonal) 32 inches 37 inches 40 inches
PC Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz
Sound
Output 10W x 2 10W x 2 10W x 2
Dimensions (WxDxH)
Body
With stand
31.5 X 3.5 X 20.2 inches
(801.0 X 88.3 X 513.5 mm)
31.5 X 9.9 X 22.6 inches
(801.0 X 251.9 X 573.5 mm)
36.1 X 3.6 X 23.3 inches
(917.5 X 91.8 X 592.0 mm)
36.1 X 11.8 X 25.6 inches
(917.5 X 300.0 X 649.8 mm)
39.2 X 3.6 X 24.7 inches
(996.6.X 92.4 X 628.3 mm)
39.2 X 11.8 X 27.0 inches
(996.6 X 300.0 X 686.1
mm
)
Weight
With Stand
Without Stand
28.9 lbs (13.1 kg)
24.0 lbs (10.9 kg)
39.5 lbs (17.9 kg)
32.4 lbs (14.7 kg)
46.7 lbs (21.2 kg)
39.7 lbs (18.0 kg)
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel
(Left / Right) -20˚ ~ 20˚
Model Name LN46A550P3F LN52A550P3F
Screen Size
(Diagonal) 46 inches 52 inches
PC Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz
Sound
Output
10W x 2
10W x 2
Dimensions (WxDxH)
Body
With stand
44.4 X 3.9 X 27.6 inches
(1,127.4 X 100.0 X 700.0 mm)
44.4 X 11.0 X 30.2 inches
(1,127.4 X 279.9 X 766.5 mm)
49.4 X 4.3 X 31.1 inches
(1,268.5 X 109.0 X 790.5 mm)
49.4 X 12.8 X 33.7 inches
(1,268.5 X 326.0 X 856.5 mm)
Weight
With Stand
Without Stand
60.8 lbs (27.6 kg)
51.4 lbs (23.3 kg)
71.2 lbs (32.3 kg)
59.3 lbs (26.9 kg)
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel
(Left / Right) -20˚ ~ 20˚
Design and specications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
➣
➣
➣
BN68-01392A-00ENG.indb 90 2008-02-21 ¿ÀÈÄ 9:04:45
English - 91
Dimensions
LN32A550P3F
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9.0"W
20.2
22.6
19.8
27.5
15.5
9.9
3.5
31.5
FRONT VIEW / SIDE VIEW
7.9 (200 mm)
7.9 (200 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2008 Samsung Electronics America, Inc.
BN68-01392A-00ENG.indb 91 2008-02-21 ¿ÀÈÄ 9:04:46
English - 92
Dimensions
LN37A550P3F
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9.0"W
23.3
25.6
23.9
32.4
18.3
11.8
3.6
36.1
FRONT VIEW / SIDE VIEW
7.9 (200 mm)
7.9 (200 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2008 Samsung Electronics America, Inc.
BN68-01392A-00ENG.indb 92 2008-02-21 ¿ÀÈÄ 9:04:46
English - 93
Dimensions
LN40A550P3F
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9.0"W
24.7
27.0
23.9
34.9
19.7
11.8
3.6
39.2
FRONT VIEW / SIDE VIEW
7.9 (200 mm)
7.9 (200 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2008 Samsung Electronics America, Inc.
BN68-01392A-00ENG.indb 93 2008-02-21 ¿ÀÈÄ 9:04:46
English - 94
Dimensions
LN46A550P3F
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9.0"W
27.6
30.2
25.0
40.2
22.6
11.0
3.9
44.4
FRONT VIEW / SIDE VIEW
23.6 (600 mm)
15.7 (400 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2008 Samsung Electronics America, Inc.
BN68-01392A-00ENG.indb 94 2008-02-21 ¿ÀÈÄ 9:04:47
English - 95
Dimensions
LN52A550P3F
TOP VIEW
JACK PANEL DETAIL 3.5"H X 9.0"W
31.1
33.7
27.6
45.6
25.7
12.8
4.3
49.4
FRONT VIEW / SIDE VIEW
23.6 (600 mm)
15.7 (400 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale.
Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your TV.
Not responsible for typographical or printed errors.
© 2008 Samsung Electronics America, Inc.
BN68-01392A-00ENG.indb 95 2008-02-21 ¿ÀÈÄ 9:04:47
English - 96
The GNU General Public License (GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and
to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the
GNU Library General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;
and th at you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
this free software. If the software is modied by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reect on the original authors’
reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made
it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modication follow
.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may
be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work,
and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a
work containing the Program or a portion of it, either verbatim or with modications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term “modication”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modication are not covered by this License; they are outside its scope.
The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by running the Program). Whether that is true depends on what
the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and
copy and distribute such modications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modied les to carry prominent notices stating that you changed the les and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modied program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if
the Program itself is interactive but does not normally print such an announcement, your work based on the Program is
not required to print an announcement.)
BN68-01392A-00ENG.indb 96 2008-02-21 ¿ÀÈÄ 9:04:48
English - 97
These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this
License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent
is to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code,
to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;
or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modications to it. F
or an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface denition les,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights
under this License. However, parties who have received copies, or rights, from you under this License will not have their
licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or
works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may
not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions
of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which
is implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if
he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
BN68-01392A-00ENG.indb 97 2008-02-21 ¿ÀÈÄ 9:04:48
English - 98
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Program species a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Program does not specify a version number of this License,
you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write
to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this
is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source le to most
effectively convey the exclusion of warranty; and each le should have at least the “copyright” line and a pointer to where
the full notice is found.
One line to give the program’s name and a brief idea of what it does.
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY;
for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type
`show c’ for details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of
course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-
clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for
the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which makes passes at
compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Library General Public License instead of this License.
BN68-01392A-00ENG.indb 98 2008-02-21 ¿ÀÈÄ 9:04:48
English - 99
GNU Lesser General Public License (LGPL)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the rst released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries-
-of the Free Software Foundation and other authors who decide to use it. Y
ou can use it too, but we suggest you rst think
carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular
case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs;
and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if
you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that
we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library,
you must provide complete object les to the recipients, so that they can relink them with the library after making changes to
the library and recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is
modied by someone else and passed on, the recipients should know that what they have is not the original version, so that
the original author’s reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company
cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we
insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specied in
this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the
GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General
Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination ts its criteria of freedom. The Lesser General Public License permits more lax criteria
for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the
ordinary General Public License. It also provides other free software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent
case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting
the free library to free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modied version of
the Library.
The precise terms and conditions for copying, distribution and modication follow
. Pay close attention to the difference
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library,
whereas the latter must be combined with the library in order to run.
BN68-01392A-00ENG.indb 99 2008-02-21 ¿ÀÈÄ 9:04:48
English - 100
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright
holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also
called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work
based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing
the Library or a portion of it, either verbatim or with modications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term “modication”.)
“Source code” for a work means the preferred form of the work for making modications to it. F
or a library, complete source
code means all the source code for all modules it contains, plus any associated interface denition les, plus the scripts
used to control compilation and installation of the library.
Activities other than copying, distribution and modication are not covered by this License; they are outside its scope.
The
act of running a program using the Library is not restricted, and output from such a program is covered only if its contents
constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of
this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) The modied work must itself be a software library.
b) You must cause the les modied to carry prominent notices stating that you changed the les and the date of any
change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
d) If a facility in the modied Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith
effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and
performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-dened independent of
the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function
must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the
Library, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms
of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the
Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General
Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public
License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these
notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License
applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place satises the requirement to distribute the source code, even though third parties
are not compelled to copy the source along with the object code.
BN68-01392A-00ENG.indb 100 2008-02-21 ¿ÀÈÄ 9:04:48
English - 101
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the
Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered
by this License. Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header le that is part of the Library
, the object code for the work
may be a derivative work of the Library even though the source code is not. Whether this is true is especially signicant if
the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely
dened by law.
If such an object le uses only numerical parameters, data structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object le is unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to
produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the
terms permit modication of the work for the customer’s own use and reverse engineering for debugging such modications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you
must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this
License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object
code and/or source code, so that the user can modify the Library and then relink to produce a modied executable
containing the modied Library. (It is understood that the user who changes the contents of denitions les in the
Library will not necessarily be able to recompile the application to use the modied denitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user’s computer system, rather than copying library functions into
the executable, and (2) will operate properly with a modied version of the library, if the user installs one, as long as
the modied version is interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specied
in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to
copy the above specied materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed
for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution
of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two
things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to nd the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License.
Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.
BN68-01392A-00ENG.indb 101 2008-02-21 ¿ÀÈÄ 9:04:48
English - 102
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may
not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for
enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library
by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License
would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which
is implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if
he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Library under this License may add an explicit geographical distribution
limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such
case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the Library species a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any
later version published by the Free Software Foundation. If the Library does not specify a license version number, you may
choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY,
TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR
THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
BN68-01392A-00ENG.indb 102 2008-02-21 ¿ÀÈÄ 9:04:48
English - 103
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it
free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source le to
most effectively convey the exclusion of warranty; and each le should have at least the “copyright” line and a pointer to
where the full notice is found.
<one line to give the library’s name and an idea of what it does.> Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later
version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
License for more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the
Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for
the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by
James Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
BN68-01392A-00ENG.indb 103 2008-02-21 ¿ÀÈÄ 9:04:48
•
•
•
Información importante sobre la garantía relativa al formato de visualización del televisor
BN68-01392A-00SPA.indb 1 2008-02-21 ¿ÀÈÄ 9:06:16
Información General
2
2
Conexiones
8
8
0
Funcionamiento
2
2
Control de la Imagen
8
8
22
2
2
Control de Sonido
2
2
0
2
2
Control de los Canales
0
0
Pantalla de PC
2
2
a
Descripción de las Funciones
8
8
0
WISELINK
2
8
2
Acerca de Anynet
+
+
?80
+
80
+
8
+
8
82
8
+
8
Apéndice
8
8
8
8
88
8
0
Español - 1
Español
Contenido
Símbolo
BN68-01392A-00SPA.indb 1 2008-02-21 ¿ÀÈÄ 9:06:16
Español - 2
Listado de características
•
•
•
•
•
•
•
•
Accesorios
Núcleo de ferrita (Cable de alimentación)
➣
➣
Información General
BN68-01392A-00SPA.indb 2 2008-02-21 ¿ÀÈÄ 9:06:17
Español - 3
Aspecto general del panel de control
Botónes de la parte inferior derecha del panel
88
1
2
3
4
5
7 6
➣
Botones del panel lateral
1
SOURCE
ENTER
2
3
4
5
(ENCENDIDO)
6
7
8
BN68-01392A-00SPA.indb 3 2008-02-21 ¿ÀÈÄ 9:06:18
Español - 4
Aspecto general del panel de conexiones
➣
1
AUDIO OUT
2
DIGITAL AUDIO OUT (OPTICAL)
3
4
5
ANT IN
6
WISELINK
7
8
(AURICULAR)
9
0
!
EX-LINK
@
BLOQUEO KENSINGTON
➣
BN68-01392A-00SPA.indb 4 2008-02-21 ¿ÀÈÄ 9:06:18
Español - 5
1
POWER
2
3
4
5
6
7
8
TOOLS
9
INFO
0
Botones de colores
!
CC
@
#
+
+
$
%
^
&
SOURCE
*
W.LINK (WISELINK)
(
)
RETURN
a
ENTER
b
EXIT
c
multimedia)
+
d
e
f
P.SIZE
➣
BN68-01392A-00SPA.indb 5 2008-02-21 ¿ÀÈÄ 9:06:19
Español - 6
Instalación de las pilas en el mando a distancia
1.
2.
3.
➣
➣
➣
➣
1.
2.
1.
1.
2.
Conexiones
BN68-01392A-00SPA.indb 6 2008-02-21 ¿ÀÈÄ 9:06:20
Español - 7
1.
1.
2.
1.
2.
3.
4.
5.
6.
➣
➣
➣
ANT OUT
ANT IN
Divisor
Cable
entrante
Divisor
Servicio de Cable
Cable
entrante
Divisor
Servicio de Cable
Conmutador
Cable
entrante
ANT IN
Divisor
Servicio de Cable
Cable
entrante
Conmutador
Divisor
Servicio de Cable
Cable
entrante
Antena
del
Televisor
Conmutador
ANT IN
BN68-01392A-00SPA.indb 7 2008-02-21 ¿ÀÈÄ 9:06:21
Español - 8
1.
➣
➣
➣
➣
1.
2.
➣
➣
➣
Cable de Audio
(No incluido)
2
1
o
BN68-01392A-00SPA.indb 8 2008-02-21 ¿ÀÈÄ 9:06:22
Español - 9
o
1
Cable de Audio
(No incluido)
2
1
1.
2.
➣
➣
1.
B
B
2.
➣
➣
➣
Cable de Audio
(No incluido)
2
Cable de Component (No incluido)
1
BN68-01392A-00SPA.indb 9 2008-02-21 ¿ÀÈÄ 9:06:22
Español - 10
Conexión de un reproductor de vídeo
Conexión de vídeo
1.
2.
3.
4.
5.
➣
ANT IN
➣
➣
➣
1.
2.
3.
➣
➣
Cable RF (No incluido)
3
Cable de vídeo (No incluido)
4
Cable de Audio (No incluido)
5
Cable de Audio (No incluido)
3
2
Cable RF (No incluido)
1
BN68-01392A-00SPA.indb 10 2008-02-21 ¿ÀÈÄ 9:06:23
Español - 11
Conexión de un sistema de audio digital
1.
➣
➣
➣
Sistema de audio digital
Cable óptico (No incluido)
1.
➣
➣
Cable de Audio (No incluido)
Conexión a un PC
Uso del cable D-Sub
1.
2.
1.
2.
➣
➣
➣
Uso del cable D-Sub
Cable de D-Sub (No incluido)
1
Cable de Audio de PC (No incluido)
2
2
1
BN68-01392A-00SPA.indb 11 2008-02-21 ¿ÀÈÄ 9:06:24
Español - 12
POWER
POWER
Funcionamiento
Función Plug & Play
1. POWER
ENTER
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
ENTER
5.
ENTER
ENTER
➣
➣
➣
➣
➣
➣
BN68-01392A-00SPA.indb 12 2008-02-21 ¿ÀÈÄ 9:06:26
Español - 13
6. ENTER
ENTER
7.
ENTER
8.
ENTER
9.
ENTER
Si desea reiniciar esta función...
1.
ENTER
2. ENTER
➣
Cambio de canales
1.
Utilización de los botones numéricos
1.
27
ENTER
➣
➣
BN68-01392A-00SPA.indb 13 2008-02-21 ¿ÀÈÄ 9:06:26
Español - 14
Utilización de los botones de volumen
1.
1.
2.
1.
INFO
INFO
➣
1.
2.
ENTER
3. EXIT
➣
Uso del botón
1. 7 1
ENTER
1.
➣
➣
➣
4-2
No Detaild Information
|
|
Normal
BN68-01392A-00SPA.indb 14 2008-02-21 ¿ÀÈÄ 9:06:27
Español - 15
Uso del botón TOOLS
TOOLS
1.
TOOLS
2.
3. ENTER
•
•
•
•
•
•
•
•
Selección del origen de la señal de vídeo
1.
ENTER
2.
ENTER
ENTER
EXIT
Configuración sencilla
1.
TOOLS
2.
3. ENTER
Antena
Antena
e
e
BN68-01392A-00SPA.indb 15 2008-02-21 ¿ÀÈÄ 9:06:28
Español - 16
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
ENTER
5.
ENTER
ENTER
EXIT
➣
➣
➣
➣
Prog. Auto
BN68-01392A-00SPA.indb 16 2008-02-21 ¿ÀÈÄ 9:06:28
Español - 17
Para seleccionar la fuente
1.
ENTER
2. ENTER
ENTER
Uso de los botones de colores del mando a distancia con la lista de
fuentes
TOOLS ()
•
•
SOURCE
➣
➣
➣
O
Edición del Nombre de la Fuente de entrada
1.
ENTER
ENTER
2.
ENTER
3.
ENTER
EXIT
➣
Lista de Origen
Editar Nombre
BN68-01392A-00SPA.indb 17 2008-02-21 ¿ÀÈÄ 9:06:29
Español - 18
Control de la Imagen
Cambio del formato de la imagen
1.
ENTER
2. ENTER
ENTER
Normal
Película
•
•
•
3. EXIT
Configuración sencilla
1.
TOOLS
2.
3.
4. EXITTOOLS
1.
2.
ENTER
3.
ENTER
EXIT
Luz de fondo
Contraste
Brillo
Color
•
•
•
•
•
•
➣
➣
➣
Normal
e
BN68-01392A-00SPA.indb 18 2008-02-21 ¿ÀÈÄ 9:06:30
Español - 19
1.
ENTER
2. ENTER
ENTER
3.
ENTER
4.
ENTER
5.
ENTER
Apagado
Alto
•
•
•
•
6.
ENTER
7.
ENTER
Apagado
Alto
•
•
•
•
➣
➣
Película
Configuración detallada
BN68-01392A-00SPA.indb 19 2008-02-21 ¿ÀÈÄ 9:06:30
Español - 20
8.
ENTER
9.
ENTER
10.
ENTER
11. ENTER
12.
ENTER
Auto
Nativo
Favorito
•
•
•
Personalización del espacio de color
13.
ENTER
14.
ENTER
15.
ENTER
16.
ENTER
•
•
•
•
➣
➣
➣
➣
➣
0
Gamma
BN68-01392A-00SPA.indb 20 2008-02-21 ¿ÀÈÄ 9:06:31
Español - 21
17.
ENTER
18.
pulENTER
19.
ENTER
Balance de Azul
Ganancia de Azul
Reiniciar
•
•
•
•
•
•
•
20.
ENTER
21.
ENTER
22.
ENTER
23.
ENTER
➣
➣
0
BN68-01392A-00SPA.indb 21 2008-02-21 ¿ÀÈÄ 9:06:31
Español - 22
1.
2.
ENTER
3.
ENTER
EXIT
➣
24.
ENTER
25.
ENTER
➣
BN68-01392A-00SPA.indb 22 2008-02-21 ¿ÀÈÄ 9:06:31
Español - 23
Activación de las opciones de la imagen
Activación de las opciones de la imagen
1.
ENTER
2.
ENTER
ENTER
ENTER
1.
2.
ENTER
3.
ENTER
➣
➣
➣
➣
➣
1.
2.
ENTER
3.
ENTER
EXIT
Zoom1
Zoom2
Sólo buscar
•
•
•
•
•
•
BN68-01392A-00SPA.indb 23 2008-02-21 ¿ÀÈÄ 9:06:32
Español - 24
ENTER
Reiniciar
ENTER
ENTER
Reiniciar
ENTER
P.SIZE
Zoom1 U
Zoom2 U
U
Sólo buscar
➣
➣
➣
➣
➣
➣
O
BN68-01392A-00SPA.indb 24 2008-02-21 ¿ÀÈÄ 9:06:32
Español - 25
1.
2.
ENTER
3.
ENTER
Apagado
Alto
Auto
•
•
•
•
•
EXIT
1.
2.
ENTER
3.
ENTER
Apagado
Encendido
•
•
EXIT
1.
2.
ENTER
3.
ENTER
Normal
•
•
EXIT
➣
➣
➣
BN68-01392A-00SPA.indb 25 2008-02-21 ¿ÀÈÄ 9:06:33
Español - 26
1.
2.
ENTER
3.
ENTER
EXIT
1.
2.
ENTER
3.
ENTER
EXIT
➣
➣
BN68-01392A-00SPA.indb 26 2008-02-21 ¿ÀÈÄ 9:06:33
Español - 27
Activación de Imagen en imagen
1.
ENTER
ENTER
2. ENTER
ENTER
Imagen principal Imagen Secundaria
Cambio del tamaño de la ventana PIP
3.
ENTER
ENTER
Cambio de la posición de la ventana PIP
4.
ENTER
ENTER
➣
➣
➣
➣
➣
➣
BN68-01392A-00SPA.indb 27 2008-02-21 ¿ÀÈÄ 9:06:34
Español - 28
Cambio del canal PIP
5.
ENTER
6.
ENTER
7.
ENTER
8.
ENTER
EXIT
Configuración sencilla
1.
TOOLS
2.
ENTER
3.
4.
5. EXITTOOLS
➣
e
BN68-01392A-00SPA.indb 28 2008-02-21 ¿ÀÈÄ 9:06:34
Español - 29
Control de Sonido
1.
ENTER
2. ENTER
ENTER
EXIT
Normal
Película
Favorito
•
•
•
•
•
Configuración sencilla
1.
TOOLS
2.
3.
4. EXITTOOLS
Personalización del sonido
1.
ENTER
2.
ENTER
3. ENTER
ENTER
e
BN68-01392A-00SPA.indb 29 2008-02-21 ¿ÀÈÄ 9:06:34
Español - 30
4.
•
•
•
5.
ENTER
EXIT
➣
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
TruSurround XT
TruSurround XT
SRS TruSurround XT
SRS TruSurround XT
BN68-01392A-00SPA.indb 30 2008-02-21 ¿ÀÈÄ 9:06:35
Español - 31
Elección del idioma preferido
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
➣
➣
O
1.
ENTER
2.
ENTER
3.
ENTER EXIT
Estéreo
SAP
•
•
•
➣
➣
O
BN68-01392A-00SPA.indb 31 2008-02-21 ¿ÀÈÄ 9:06:36
Español - 32
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
– +
Altavoces internos del televisor
RF
RF
Sin señal del
vídeo
➣
➣
BN68-01392A-00SPA.indb 32 2008-02-21 ¿ÀÈÄ 9:06:36
Español - 33
Escuchar el sonido de la sub imagen del PIP
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
Principal
Sub
•
•
➣
1.
ENTER
2.
ENTER
EXIT
3.
ENTER
EXIT
•
•
Conexión de los auriculares (se vende por separado)
➣
➣
➣
➣
BN68-01392A-00SPA.indb 33 2008-02-21 ¿ÀÈÄ 9:06:37
Español - 34
Gestión de los canales
1.
ENTER
ENTER
2.
3.
ENTER
4.
ENTER
Uso de los botones de colores del mando a distancia con la lista de canales.
Amarillo
TOOLS
•
•
•
•
➣
O
➣
➣
Control de los Canales
BN68-01392A-00SPA.indb 34 2008-02-21 ¿ÀÈÄ 9:06:37
Español - 35
Supresión y adición de canales
1.
ENTER
ENTER
2.
3.
ENTER
4.
TOOLS
5.
ENTER
6.
EXIT
TOOLSENTER
➣
➣
➣
➣
➣
O
BN68-01392A-00SPA.indb 35 2008-02-21 ¿ÀÈÄ 9:06:38
Español - 36
1.
ENTER
ENTER
2.
3.
ENTER
4.
Agregación de varios canales a la lista de favoritos
5.
TOOLS
6.
ENTER
7.
TOOLS
ENTER
EXIT
Configuración sencilla
1.
TOOLS
2.
ENTER
➣
➣
➣
➣
O
O
➣
e
BN68-01392A-00SPA.indb 36 2008-02-21 ¿ÀÈÄ 9:06:39
Español - 37
Reserva de un programa (visualización con temporizador)
1.
ENTER
ENTER
2. TOOLS
3.
ENTER
4.
ENTER
EXIT
Guía de programas digitales y reserva de visualización
➣
➣
➣
O
Aire
4
Once
01 - 01 - 2008
BN68-01392A-00SPA.indb 37 2008-02-21 ¿ÀÈÄ 9:06:39
Español - 38
1.
ENTER
ENTER
2.
3.
ENTER
4.
TOOLS
5.
ENTER
6.
ENTER
Cancelación de una reserva
4.
TOOLS
5.
ENTER
6.
ENTER
EXIT
Opciones programadas
Cambiar información
Cancelar programaciones
Información
•
•
•
➣
O
BN68-01392A-00SPA.indb 38 2008-02-21 ¿ÀÈÄ 9:06:40
Español - 39
1.
ENTER
ENTER
2.
TOOLS
3.
ENTER
4.
ENTER
Botones numéricos
Botón verde
Botón amarillo
Botón azul
•
•
•
•
•
5.
EXIT
1.
ENTER
ENTER
2.
TOOLS
3.
ENTER
➣
➣
_
B G
L M N
Q S T
BN68-01392A-00SPA.indb 39 2008-02-21 ¿ÀÈÄ 9:06:41
Español - 40
1.
ENTER
2.
ENTER
ENTER
ENTER
3.
ENTER
EXIT
➣
➣
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
EXIT
➣
➣
➣
0
0
BN68-01392A-00SPA.indb 40 2008-02-21 ¿ÀÈÄ 9:06:41
Español - 41
Comprobación de la potencia de la señal digital
1.
ENTER
2.
ENTER
EXIT
BN68-01392A-00SPA.indb 41 2008-02-21 ¿ÀÈÄ 9:06:41
Español - 42
1.
2.
3.
4.
Pantalla de PC
D-Sub Entrada
Resolución
Frecuencia
Frecuencia
Frecuencia del
Polaridad de
sincronización
Resolución
Frecuencia
Frecuencia
Frecuencia del
Polaridad de
sincronización
CEA
BN68-01392A-00SPA.indb 42 2008-02-21 ¿ÀÈÄ 9:06:42
Español - 43
SOURCE
1.
ENTER
2.
ENTER
EXIT
Configuración sencilla
1.
TOOLS
2.
ENTER
SOURCE
1.
ENTER
2.
ENTER
3.
ENTER
ENTER
EXIT
➣
➣
➣
➣
PC ----
Pantalla
e
BN68-01392A-00SPA.indb 43 2008-02-21 ¿ÀÈÄ 9:06:42
Español - 44
Cambio de la posición de la pantalla
SOURCE
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
EXIT
SOURCE
1.
ENTER
2.
ENTER
3.
ENTER
EXIT
➣
➣
Pantalla
Pantalla
BN68-01392A-00SPA.indb 44 2008-02-21 ¿ÀÈÄ 9:06:43
Español - 45
INFO
1.
ENTER
ENTER
2. ENTER
3.
ENTER
ENTER
4.
ENTER
5.
ENTER
EXIT
INFO
➣
➣
2008
00
am
--
--
----
--
--
--
BN68-01392A-00SPA.indb 45 2008-02-21 ¿ÀÈÄ 9:06:43
Español - 46
1.
ENTER
ENTER
2. ENTER
3.
ENTER
ENTER
4.
ENTER
5.
ENTER
6.
ENTER
ENTER
EXIT
➣
➣
BN68-01392A-00SPA.indb 46 2008-02-21 ¿ÀÈÄ 9:06:44
Español - 47
1.
ENTER
ENTER
2.
ENTER
3.
ENTER
ENTER
4. EXIT
Configuración sencilla
1.
TOOLS
2.
3.
4. EXITTOOLS
e
BN68-01392A-00SPA.indb 47 2008-02-21 ¿ÀÈÄ 9:06:44
Español - 48
Activación y desactivación del temporizador
1.
ENTER
ENTER
2.
ENTER
3.
Contenido
Repetir
ENTER
•
•
•
•
–
–
–
–
–
•
➣
EXIT
➣
➣
am
Cable
Antena
3
Chnal
00 am
00 am
BN68-01392A-00SPA.indb 48 2008-02-21 ¿ÀÈÄ 9:06:44
Español - 49
Selección del idioma de menú
1.
ENTER
ENTER
2.
ENTER
EXIT
Descripción de las Funciones
1.
ENTER
2.
ENTER
➣
➣
English
BN68-01392A-00SPA.indb 49 2008-02-21 ¿ÀÈÄ 9:06:45
Español - 50
3.
ENTER
EXIT
1.
ENTER
2.
ENTER
3.
ENTER
ENTER
EXIT
➣
BN68-01392A-00SPA.indb 50 2008-02-21 ¿ÀÈÄ 9:06:45
Español - 51
1.
ENTER
2.
ENTER
3.
ENTER
4.
•
•
•
•
•
•
5.
ENTER
ENTER
6.
ENTER
ENTER
ALL
•
•
•
S
L
D
•
•
•
7.
EXIT
➣
➣
➣
➣
➣
ALL
S L D
Perm. todo
ALL
S L D
Perm. todo
BN68-01392A-00SPA.indb 51 2008-02-21 ¿ÀÈÄ 9:06:46
Español - 52
1.
ENTER
2.
ENTER
3.
ENTER
4.
G
PG
PG-13
R
NC-17
X
NR
•
•
•
•
•
•
•
ENTER
ENTER
EXIT
➣
➣
➣
G
PG
PG-13
R
NC-17
X
NR
Perm. todo
G
PG
PG-13
R
NC-17
X
NR
Perm. todo
BN68-01392A-00SPA.indb 52 2008-02-21 ¿ÀÈÄ 9:06:47
Español - 53
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
EXIT
C
C8+
G
PG
14+
18+
•
•
•
•
•
•
➣
➣
C
C8+
G
PG
14+
18+
Perm. todo
C
C8+
G
PG
14+
18+
Perm. todo
BN68-01392A-00SPA.indb 53 2008-02-21 ¿ÀÈÄ 9:06:47
Español - 54
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
EXIT
G
8 ans+
13 ans+
16 ans+
18 ans+
•
•
•
•
•
➣
➣
G
8 ans+
13 ans+
16 ans+
18 ans+
Perm. todo
G
8 ans+
13 ans+
16 ans+
18 ans+
Perm. todo
BN68-01392A-00SPA.indb 54 2008-02-21 ¿ÀÈÄ 9:06:48
Español - 55
1.
ENTER
2.
ENTER
3.
ENTER
4.
ENTER
EXIT
1.
ENTER
2.
ENTER
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Perm. todo
BN68-01392A-00SPA.indb 55 2008-02-21 ¿ÀÈÄ 9:06:48
Español - 56
1.
ENTER
2.
ENTER
3. ENTER
ENTER
4.
ENTER
ENTER
EXIT
CC1
CC2
CC3
CC4
Texto1
Texto2
•
•
•
•
•
•
•
•
➣
➣
O
BN68-01392A-00SPA.indb 56 2008-02-21 ¿ÀÈÄ 9:06:49
Español - 57
1.
ENTER
2.
ENTER
3. ENTER
ENTER
4.
ENTER
ENTER
5.
ENTER
6.
ENTER
ENTER
ENTER
EXIT
Tamaño
Estilo fuente
Color de primer plano
Color de fondo
Opacidad de primer plano
Opacidad de fondo
Regresar al Predeterminado
•
•
•
•
•
•
•
➣
➣
➣
➣
➣
➣
O
BN68-01392A-00SPA.indb 57 2008-02-21 ¿ÀÈÄ 9:06:49
Español - 58
1.
ENTER
2.
ENTER
3.
ENTER
ENTER
Apagado
Alto
•
•
•
•
EXIT
La melodía no se reproduce
–
➣
1.
ENTER
2.
ENTER
3.
ENTER
ENTER
Apagado
Encendido
•
•
•
•
EXIT
➣
BN68-01392A-00SPA.indb 58 2008-02-21 ¿ÀÈÄ 9:06:50
Español - 59
1.
ENTER
2.
ENTER
3.
ENTER
Apagado
Deportes
Película
•
•
•
•
EXIT
➣
➣
➣
O
Uso de la función de ahorro de energía
1.
ENTER
2.
ENTER
ENTER
Apagado
Alto
Auto
•
•
•
•
•
EXIT
Apagado
Apagado
Apagado
Apagado
BN68-01392A-00SPA.indb 59 2008-02-21 ¿ÀÈÄ 9:06:50
Español - 60
Guía de actualización del software
1.
2.
ENTER
3.
ENTER
4. ENTER
5.
ENTER
HDMI IN3HDMI IN3
Unidad USB
BN68-01392A-00SPA.indb 60 2008-02-21 ¿ÀÈÄ 9:06:51
Español - 61
WISELINK
Uso de la función WISELINK
Conexión de un dispositivo USB
1
POWER
2.
W.LINK
Uso de los botones del mando a distancia con el menú WISELINK
Botón Función
ENTER
ENTER
ENTER
RETURN
TOOLS
INFO
W.LINK
EXIT
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
HDMI IN3HDMI IN3
Unidad USB
BN68-01392A-00SPA.indb 61 2008-02-21 ¿ÀÈÄ 9:06:53
Español - 62
Uso del menú WISELINK
1.
ENTER
2.
ENTER
W.LINK
SOURCE
ENTER
3.
ENTER
4.
ENTER
W.LINK
➣
O
O
➣
➣
➣
Uso de la lista de fotos
Lista de fotos
1.
W.LINK
2.
ENTER
ENTER
➣
➣
➣
➣
➣
➣
➣
WISELINK
e
Foto
★ ★ ★
WISELINK
e
BN68-01392A-00SPA.indb 62 2008-02-21 ¿ÀÈÄ 9:06:54
Español - 63
Pantalla de visualización
Foto
★ ★ ★
2 6
1
3 4
75
1
Foto actualmente seleccionada
2
3
Norma de clasificación actual
4
5
Dispositivo actual
6
Información de selección del elemento
7
Elementos de ayuda
Botón verde (Conf fav)
Botón amarillo (Selección)
Botón
(Saltar)
Botón TOOLS (Opción)
•
•
•
•
•
BN68-01392A-00SPA.indb 63 2008-02-21 ¿ÀÈÄ 9:06:55
Español - 64
1.
W.LINK
2.
ENTER
3.
4.
ENTER
1.
2.
3. TOOLS
4. ENTER
Fecha
1.
2.
3. TOOLS
4. ENTER
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
WISELINK
Foto
★ ★ ★
Foto
★ ★ ★
Foto
★ ★ ★
2008 2008
BN68-01392A-00SPA.indb 64 2008-02-21 ¿ÀÈÄ 9:06:56
Español - 65
Color
1.
2.
3. TOOLS
4. ENTER
Cambio de la información del color
1.
Cambio de la información de varios archivos
La
2.
TOOLS
3.
ENTER
4.
ENTER
Composición
1.
2.
3. TOOLS
4. ENTER
Cambio de la información de la composición
1.
Cambio de la información de varios archivos
La
2.
TOOLS
3.
ENTER
4.
ENTER
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Foto
★ ★ ★
Foto
★ ★ ★
Foto
★ ★ ★
Foto
★ ★ ★
BN68-01392A-00SPA.indb 65 2008-02-21 ¿ÀÈÄ 9:06:58
Español - 66
Carpeta
1.
2.
3. TOOLS
4. ENTER
Preferencias
1.
2.
3. TOOLS
4. ENTER
Cambio de la configuración de favorito
1.
Cambio de la información de varios archivos
La
2.
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
➣
➣
➣
➣
➣
➣
➣
➣
Foto
★ ★ ★
Foto
★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
BN68-01392A-00SPA.indb 66 2008-02-21 ¿ÀÈÄ 9:06:59
Español - 67
Eliminación de archivos de fotos
1.
2. TOOLS
3.
ENTER
4.
ENTER
5.
W.LINK
Supresión de varias fotos
1.
La
2.
TOOLS
3.
ENTER
4.
ENTER
5.
W.LINK
1.
2. TOOLS
3.
ENTER
INFO
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
Foto
★ ★ ★
Foto
★ ★ ★
Foto
★ ★ ★
BN68-01392A-00SPA.indb 67 2008-02-21 ¿ÀÈÄ 9:07:01
Español - 68
1.
W.LINK
2.
ENTER
3.
4. TOOLS
5.
ENTER
ENTER
Para ver una presentación sólo con los archivos seleccionados
1.
La
2.
ENTER
Reproducción Repr. grupo actual
1.
2.
3. TOOLS
4.
ENTER
5.
W.LINK
Icono Presentación en pantalla Función
❙❙
ENTER
ENTER
➣
➣
➣
➣
➣
O
➣
➣
➣
➣
➣
Foto
★ ★ ★
Foto
★ ★ ★
E
BN68-01392A-00SPA.indb 68 2008-02-21 ¿ÀÈÄ 9:07:02
Español - 69
1.
W.LINK
2.
ENTER
3.
4.
ENTER
5.
W.LINK
Uso del menú de opciones durante una presentación (o la visualización de una foto)
1.
TOOLS
2.
ENTER
Inicio o detención de una presentación
ENTER
ENTER
Icono Presentación
en pantalla
Función
➣
➣
➣
➣
➣
➣
➣
E
BN68-01392A-00SPA.indb 69 2008-02-21 ¿ÀÈÄ 9:07:02
Español - 70
Ampliación de una imagen
ENTER
ENTER
Icono Presentación
en pantalla
Función
Encendido
Apagado
•
•
➣
➣
➣
➣
➣
➣
n
BN68-01392A-00SPA.indb 70 2008-02-21 ¿ÀÈÄ 9:07:03
Español - 71
Configuración de la música de fondo
ENTER
Arch. Sel.
Ánimo
•
•
•
Selección de un archivo de música de fondo
ENTER
La
ENTER
ENTER
Extracción segura
ENTER
➣
➣
➣
➣
➣
➣
BN68-01392A-00SPA.indb 71 2008-02-21 ¿ÀÈÄ 9:07:03
Español - 72
Uso de la lista de música
1.
W.LINK
2.
ENTER
ENTER
Screen Display
★ ★ ★
★ ★ ★
★ ★ ★
1
64
5
2 3
1
2
Norma de clasificación actual
3
4
Dispositivo actual
➣
➣
➣
★ ★ ★
★ ★ ★
★ ★ ★
WISELINK
e
BN68-01392A-00SPA.indb 72 2008-02-21 ¿ÀÈÄ 9:07:04
Español - 73
1.
W.LINK
2.
ENTER
3.
4.
ENTER
Título
1.
2.
3. TOOLS
4.
ENTER
➣
➣
➣
➣
➣
➣
➣
➣
5
Información de selección del elemento
6
Elementos de ayuda
Botón verde (Conf fav)
Botón amarillo (Selección)
Botón
(Saltar)
Botón TOOLS (Opción)
•
•
•
•
•
WISELINK
e
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
BN68-01392A-00SPA.indb 73 2008-02-21 ¿ÀÈÄ 9:07:04
Español - 74
Artista
1.
2.
3. TOOLS
4.
ENTER
Ánimo
1.
2.
3. TOOLS
4.
ENTER
1.
2.
TOOLS
3.
ENTER
4.
ENTER
➣
➣
➣
➣
➣
➣
➣
➣
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
BN68-01392A-00SPA.indb 74 2008-02-21 ¿ÀÈÄ 9:07:05
Español - 75
Género
1.
2.
3. TOOLS
4.
ENTER
Carpeta
Orden de los archivos de música por carpeta
1.
2.
3. TOOLS
4.
ENTER
Preferencias
1.
2.
3. TOOLS
4.
ENTER
Cambio de la configuración de favorito
1
Cambio de la información de varios archivos
La
2.
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
3.
ENTER
➣
➣
➣
➣
➣
➣
➣
➣
➣
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★ ★
BN68-01392A-00SPA.indb 75 2008-02-21 ¿ÀÈÄ 9:07:06
Español - 76
Supresión de archivos de música
1.
2. TOOLS
3.
ENTER
4.
ENTER
5.
W.LINK
Eliminación de varios archivos de música
1.
La
2. TOOLS
3.
ENTER
4.
ENTER
5.
W.LINK
1.
2.
TOOLS
3.
ENTER
INFO
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
O
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
BN68-01392A-00SPA.indb 76 2008-02-21 ¿ÀÈÄ 9:07:07
Español - 77
Reproducción de un archivo de música
Reproducción de un archivo de música
1.
W.LINK
2.
ENTER
3.
ENTER
ENTER
ENTER
4.
W.LINK
Reproducción de un grupo de música
1.
W.LINK
2.
ENTER
3.
4. TOOLS
5.
ENTER
6.
W.LINK
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
★ ★ ★
BN68-01392A-00SPA.indb 77 2008-02-21 ¿ÀÈÄ 9:07:08
Español - 78
Reproducción de archivos de música seleccionados
1.
W.LINK
2.
ENTER
3.
La
4.
ENTER
5.
W.LINK
Icono Presentación en pantalla Función
❙❙
ENTER
Repetición de la reproducción de música
1.
TOOLS
2.
3.
Encendido
Apagado
•
•
4. W.LINK
➣
➣
➣
★ ★ ★
★ ★ ★
★ ★ ★
BN68-01392A-00SPA.indb 78 2008-02-21 ¿ÀÈÄ 9:07:09
Español - 79
1.
W.LINK
2.
ENTER
3.
4.
ENTER
Información
ENTER
Extracción segura
W.LINK
WISELINK
e
Configuración
Configuración
Configuración
BN68-01392A-00SPA.indb 79 2008-02-21 ¿ÀÈÄ 9:07:09
Español - 80
¿Qué es Anynet
+
?
+
+
Acerca de Anynet
+
Conexión de dispositivos Anynet
+
+
+
+
Para conectar al televisor
Panel lateral del televisor
Dispositivo
Anynet
+
1
Dispositivo
Anynet
+
2
Dispositivo
Anynet
+
3
+
Para conectar al sistema de cine en casa
Panel lateral del televisor
Dispositivo
Anynet
+
1
Dispositivo
Anynet
+
2
Dispositivo
Anynet
+
3
Cable óptico
Película en casa
1.
+
2.
+
+
+
+
+
+
➣
➣
➣
➣
➣
➣
BN68-01392A-00SPA.indb 80 2008-02-21 ¿ÀÈÄ 9:07:11
Español - 81
+
+
Para usar la función Anynet
+
+
1.
ENTER
2.
+
ENTER
3. ENTER
+
4.
ENTER
+
+
+
+
+
1.
ENTER
2.
ENTER
EXIT
+
➣
➣
➣
➣
➣
➣
➣
+
1. TOOLS
ENTER
+
2.
ENTER
+
POWER
SOURCE
+
+
TOOLS.
➣
➣
➣
➣
➣
➣
➣
➣
e
BN68-01392A-00SPA.indb 81 2008-02-21 ¿ÀÈÄ 9:07:12
Español - 82
+
+
+
+
Descripción
+
+
+
+
Botónes del mando a distancia del televisor disponibles en el modo Anynet
+
Tipo de dispositivo Estado de funcionamiento Botónes disponibles
Dispositivo Anynet
+
ENTER
EXIT
Dispositivo con
sintonizador incorporado
Dispositivo de audio
+
+
+
+
+
➣
➣
➣
➣
➣
➣
Grabación
1.
TOOLS
2.
ENTER
ENTER
Cuando no se muestra el dispositivo de grabación
EXIT
TOOLS
➣
➣
➣
e
BN68-01392A-00SPA.indb 82 2008-02-21 ¿ÀÈÄ 9:07:13
Español - 83
Escucha a través de un receptor
1.
TOOLS
2.
3.
EXIT
➣
➣
➣
➣
➣
➣
Solución de problemas de Anynet
+
Síntoma Solución
Anynet
+
no funciona.
+
+
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
•
•
•
•
Deseo iniciar Anynet
+
.
+
+
TOOLS
•
•
Deseo salir de Anynet
+
.
+
SOURCE
+
+
•
•
•
En la pantalla aparece el
dispositivo Anynet
+
+
•
•
El dispositivo Anynet
+
no
funciona.
El dispositivo conectado
no se muestra.
+
+
+
+
+
+
•
•
•
•
•
•
El programa de televisión
no se puede grabar.
El sonido del televisor no
sale a través del receptor.
e
BN68-01392A-00SPA.indb 83 2008-02-21 ¿ÀÈÄ 9:07:13
Español - 84
Problema Posible Solución
SOURCE
Apéndice
BN68-01392A-00SPA.indb 84 2008-02-21 ¿ÀÈÄ 9:07:13
Español - 85
Problema Posible Solución
➣
EXIT
BN68-01392A-00SPA.indb 85 2008-02-21 ¿ÀÈÄ 9:07:13
Español - 86
Instalación del soporte
1.
2.
12
➣
➣
➣
➣
Desconexión del soporte
1.
2.
3.
➣
BN68-01392A-00SPA.indb 86 2008-02-21 ¿ÀÈÄ 9:07:14
Español - 87
Cable EX-LINK
(no suministrado)
Acceso al menú
1.
ENTER
ENTER
ENTER
2.
INFO
ENTER
3.
RETURN
4. ENTER
5. ENTER
Desplazamiento a la posición memorizada
1.
2.
+
➣
➣
•
•
•
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
➣
Guardar
Seleccione un modo para guardar.
Posición1
Posición2
Posición3
Ingresar Regresar
INFO
1 2 3Posición
INFO
1 2 3
Posición1
Posición
BN68-01392A-00SPA.indb 87 2008-02-21 ¿ÀÈÄ 9:07:16
Español - 88
Familia de producto pulgadas
Cantidad
M8
M8
➣
➣
➣
➣
➣
➣
➣
➣
BN68-01392A-00SPA.indb 88 2008-02-21 ¿ÀÈÄ 9:07:16
Español - 89
<Opcional>
Figura 2
Figura 1
Cable
➣
1.
2.
3.
BN68-01392A-00SPA.indb 89 2008-02-21 ¿ÀÈÄ 9:07:17
Español - 90
LN32A550P3F LN37A550P3F LN40A550P3F
Tamaño de pantalla
PC Resolución
Sonido
mm
Peso
Factores
medioambientales
Giro del soporte
LN46A550P3F LN52A550P3F
Tamaño de pantalla
PC Resolución
Sonido
Peso
Factores
medioambientales
Giro del soporte
➣
➣
➣
BN68-01392A-00SPA.indb 90 2008-02-21 ¿ÀÈÄ 9:07:17
Español - 91
Tamaño
LN32A550P3F
BN68-01392A-00SPA.indb 91 2008-02-21 ¿ÀÈÄ 9:07:17
Español - 92
Tamaño
LN37A550P3F
BN68-01392A-00SPA.indb 92 2008-02-21 ¿ÀÈÄ 9:07:18
Español - 93
Tamaño
LN40A550P3F
BN68-01392A-00SPA.indb 93 2008-02-21 ¿ÀÈÄ 9:07:18
Español - 94
Tamaño
LN46A550P3F
BN68-01392A-00SPA.indb 94 2008-02-21 ¿ÀÈÄ 9:07:18
Español - 95
Tamaño
LN52A550P3F
BN68-01392A-00SPA.indb 95 2008-02-21 ¿ÀÈÄ 9:07:19
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
Samsung LN52A550P3F Manual de usuario
- Categoría
- Televisores LCD
- Tipo
- Manual de usuario
En otros idiomas
- English: Samsung LN52A550P3F User manual
Documentos relacionados
-
Samsung LN-T5781F Manual de usuario
-
Samsung LN37A550P3F Manual de usuario
-
-
Samsung PN50A450P1D Manual de usuario
-
-
-
Samsung LN52B550 Manual de usuario
-
-
-