Intermec AD3 Supplementary Manual

Tipo
Supplementary Manual

Este manual también es adecuado para

1
AD3, AD4 Compliance Insert
For Users in the United States and Canada
Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation.
L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec
Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu’a l’usager d’utiliser l'équipement.
FCC Digital Emissions Compliance
The AD3 and AD4 have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.
Canadian Digital Apparatus Compliance
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user’s authority to operate the equipment.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
For Users Outside of the United States or Canada
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the users authority to operate the equipment.
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse.
Caution: For use with the Intermec Model CK60 only. For power supply use Intermec Model 851-075-001. No user-
servicable parts.
Attention: Pour utilisation avec le modèle Intermec CK60 seulement. Pour la source d’alimentation, utilisez Intermec
modèle 851-075-001. Il ne contient aucune pièce réparable par l’utilisateur.
Place this supplement in your manual.
Veuillez placer ce supplément dans votre manuel.
Caution: This marking indicates that the user should read all included documentation before use.
Caution: For use with the Intermec Model CK60 only. For power supply use Intermec Model 851-075-001. No user-
servicable parts.
S&E
MIC
2
敬告本产品的用户,请务必使用 Intermec Technologies Corporation 许可的附件和外围设备。如果使用推荐附件之外的其它附件,或
未经 Intermec Technologies Corporation 许可而擅自改装本产品,都可能会使本产品的符合性无效,并可能会导致用户失去操作本设
备的权利。
Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten
Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec
Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen
vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des
Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren.
미국 및 캐나다 이외의 거주자의 경우
Intermec Technologies Corporation 에서 승인한 부속품 및 주변 기기를 사용하는 본 제품의 사용자는 주의를 기울여야 합니다 . 권장
되지 않은 부속품을 사용하거나 Intermec Technologies Corporation 의 승인 없이 본 제품을 변경할 경우 , 본 제품의 보증이 무효화되
거나 장비 조작에 대한 사용자의 권한이 박탈될 수 있습니다 .
Para usuários fora do Canadá ou dos Estados Unidos
Se advierte a los usuarios de este producto que usen accesorios y periféricos aprobados por Intermec Technologies Corporation. El uso de
accesorios aparte de los recomendados, o los cambios a este producto que no estén aprobados por Intermec Technologies Corporation,
pueden anular el cumplimiento de este producto y ocasionar la pérdida de la autorización del usuario para operar el equipo.
Для пользователей вне Соединенных Штатов или Канады
警告 : 仅供与 Intermec CK60 型充电器配套使用。 为提供电源,可使用 Intermec 851-075-001 型号的产品。没有可供用户
维修的零部件。
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen
lesen soll.
Vorsicht: Nur zur Verwendung mit dem Intermec-Modell CK60. Als Netzteil Intermec Modell 851-075-001 verwenden.
Enthält keine Teile, die vom Benutzer gewartet werden können.
주의 : 이 표시는 제품 사용 전에 모든 설명서 내용을 읽어야 한다는 것을 나타냅니다 .
T 주의 : Intermec 모델 CK60 만 사용하십시오 . 전력 공급 시 , 인터멕 851-075-001 모델 사용 . 사용자 조작 사용 부품
님.
Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso.
Cuidado: Para usar sólo con el Modelo CK60 de Intermec. Use o modelo 851-075-001 da Intermec para a fonte de
alimentação. Este equipamento não contém peças que possam ser reparadas pelo usuário.
Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию,
прежде чем начинать работу.
ᷛᖫ㸼ᯢ⫼᠋೼Փ⫼ࠡᑨ䯙䇏᠔᳝䱣䰘᭛ḷDŽ
䄺ਞ˖
3
Пользователи этого продукта предупреждаются, что они должны использовать принадлежности и периферийные устройства,
утвержденные Intermec Technologies Corporation. Использование принадлежностей, не являющихся рекомендованными, или
внесение в этот продукт изменений, не утвержденных Intermec Technologies Corporation, может сделать продукт не
соответствующим требованиям и привести к утрате пользователем права работать с данным оборудованием.
Para usuarios fuera de Canada o de los Estados Unidos
Os usuários deste produto devem usar acessórios e periféricos aprovados pela Intermec Technologies Corporation. Usar acessórios não
recomendados, ou fazer alterações neste produto não aprovadas pela Intermec Technologies Corporation, poderá anular a conformidade
deste produto e resultar na perda da permissão do usuário de utilizar o equipamento.
Осторожно: Для использования только с моделью Intermec CK60. Для питания используйте модель Intermec
851-075-001. Детали, обслуживаемые пользователем, отсутствуют.
Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso.
Precaución: Para uso exclusivo com o modelo CK60 da Intermec. Para la fuente de alimentación, use el Modelo 851-075-
001 de Intermec. No hay piezas a las cuales pueda dar servicio el usuario.
AD3, AD4 Compliance Insert
*933-061-001*
P/N 933-061-001
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2006 Intermec Technologies
Corporation. All rights reserved.

Transcripción de documentos

AD3, AD4 Compliance Insert MIC S&E For Users in the United States and Canada Caution: This marking indicates that the user should read all included documentation before use. Attention: Ce marquage indique que l’usager doit, avant l’utilisation, lire toute la documentation incluse. Caution: For use with the Intermec Model CK60 only. For power supply use Intermec Model 851-075-001. No userservicable parts. Attention: Pour utilisation avec le modèle Intermec CK60 seulement. Pour la source d’alimentation, utilisez Intermec modèle 851-075-001. Il ne contient aucune pièce réparable par l’utilisateur. Place this supplement in your manual. Veuillez placer ce supplément dans votre manuel. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Utilisateurs de ce produit sont avisés d’utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation. L’utilisation d’accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu’a l’usager d’utiliser l'équipement. FCC Digital Emissions Compliance The AD3 and AD4 have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. Canadian Digital Apparatus Compliance This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Conformité aux normes canadiennes sur les appareils numériques Cet appareil numérique de la classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada. For Users Outside of the United States or Canada Caution: This marking indicates that the user should read all included documentation before use. Caution: For use with the Intermec Model CK60 only. For power supply use Intermec Model 851-075-001. No userservicable parts. The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. 1 䄺ਞ˖䆹ᷛᖫ㸼ᯢ⫼᠋೼Փ⫼ࠡᑨ䯙䇏᠔᳝䱣䰘᭛ḷDŽ 警告 : 仅供与 Intermec CK60 型充电器配套使用。 为提供电源,可使用 Intermec 851-075-001 型号的产品。没有可供用户 维修的零部件。 敬告本产品的用户,请务必使用 Intermec Technologies Corporation 许可的附件和外围设备。如果使用推荐附件之外的其它附件,或 未经 Intermec Technologies Corporation 许可而擅自改装本产品,都可能会使本产品的符合性无效,并可能会导致用户失去操作本设 备的权利。 Für Benutzer außerhalb von Kanada oder den Vereinigten Staaten Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll. Vorsicht: Nur zur Verwendung mit dem Intermec-Modell CK60. Als Netzteil Intermec Modell 851-075-001 verwenden. Enthält keine Teile, die vom Benutzer gewartet werden können. Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren. 미국 및 캐나다 이외의 거주자의 경우 주의 : 이 표시는 제품 사용 전에 모든 설명서 내용을 읽어야 한다는 것을 나타냅니다 . T 주의 : Intermec 모델 CK60 만 사용하십시오 . 전력 공급 시 , 인터멕 851-075-001 모델 사용 . 사용자 조작 사용 부품 아 님. Intermec Technologies Corporation 에서 승인한 부속품 및 주변 기기를 사용하는 본 제품의 사용자는 주의를 기울여야 합니다 . 권장 되지 않은 부속품을 사용하거나 Intermec Technologies Corporation 의 승인 없이 본 제품을 변경할 경우 , 본 제품의 보증이 무효화되 거나 장비 조작에 대한 사용자의 권한이 박탈될 수 있습니다 . Para usuários fora do Canadá ou dos Estados Unidos Cuidado: Esta identificação indica que o usuário deve ler toda a documentação fornecida antes do uso. Cuidado: Para usar sólo con el Modelo CK60 de Intermec. Use o modelo 851-075-001 da Intermec para a fonte de alimentação. Este equipamento não contém peças que possam ser reparadas pelo usuário. Se advierte a los usuarios de este producto que usen accesorios y periféricos aprobados por Intermec Technologies Corporation. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no estén aprobados por Intermec Technologies Corporation, pueden anular el cumplimiento de este producto y ocasionar la pérdida de la autorización del usuario para operar el equipo. Для пользователей вне Соединенных Штатов или Канады Осторожно: Эта пометка означает, что пользователь должен прочитать всю прилагаемую документацию, прежде чем начинать работу. 2 Осторожно: Для использования только с моделью Intermec CK60. Для питания используйте модель Intermec 851-075-001. Детали, обслуживаемые пользователем, отсутствуют. Пользователи этого продукта предупреждаются, что они должны использовать принадлежности и периферийные устройства, утвержденные Intermec Technologies Corporation. Использование принадлежностей, не являющихся рекомендованными, или внесение в этот продукт изменений, не утвержденных Intermec Technologies Corporation, может сделать продукт не соответствующим требованиям и привести к утрате пользователем права работать с данным оборудованием. Para usuarios fuera de Canada o de los Estados Unidos Precaución: Esta marca indica que el usuario debe leer toda la documentación incluida antes del uso. Precaución: Para uso exclusivo com o modelo CK60 da Intermec. Para la fuente de alimentación, use el Modelo 851-075001 de Intermec. No hay piezas a las cuales pueda dar servicio el usuario. Os usuários deste produto devem usar acessórios e periféricos aprovados pela Intermec Technologies Corporation. Usar acessórios não recomendados, ou fazer alterações neste produto não aprovadas pela Intermec Technologies Corporation, poderá anular a conformidade deste produto e resultar na perda da permissão do usuário de utilizar o equipamento. 3 Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2006 Intermec Technologies Corporation. All rights reserved. AD3, AD4 Compliance Insert *933-061-001* P/N 933-061-001
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Intermec AD3 Supplementary Manual

Tipo
Supplementary Manual
Este manual también es adecuado para

En otros idiomas