LG 22LV2500 Manual de usuario

Marca: LG

Modelo: 22LV2500

Categoría: Televisores LED

Tipo: Manual de usuario

OWNER’S MANUAL

LED LCD TV / LCD TV

PLASMA TV

Please read this manual carefully before operating your

set and retain it for future reference.

www.lg.com

P/NO : MFL59166645 (1111-REV11)

LED LCD TV MODELS

19LV2500

22LV2500

26LV2500

32LV2500

32LV3400

42LV3400

LCD TV MODELS

26LK330

32LK330

32LK430

32LK450

37LK450

42LK450

47LK450

47LK950

PLASMA TV MODELS

42PT250B

50PT250B

42PW350B

50PW350B

50PV550B

60PV550B

32LV3500

37LV3500

42LV3500

47LV3500

55LV3500

32LW4500

42LW4500

47LW4500

26LK331C

32LK331C

32LK334C

32LK430B

32LK451C

37LK451C

42LK451C

42PT350B

50PT350B

26LV255C

32LV255C

42LV345C

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance

of your product.

TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR

BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be

of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING/CAUTION

Read these instructions.

Keep these instructions.

Heed all warning.

Follow all instruction.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding-type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet. (Can differ by country)

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

Only use attachments/accessories specified

by the manufacturer.

Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Never touch this apparatus or antenna during

a thunder or lightning storm.

When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.

Do not allow an impact shock or any objects

to fall into the product, and do not drop

anything onto the screen.

CAUTION concerning the Power Cord:

It is recommended that appliances be

placed upon a dedicated circuit; that is, a

single outlet circuit which powers only that

appliance and has no additional outlets or

branch circuits. Check the specification page

of this owner’s manual to be certain. Do not

connect too many appliances to the same

AC power outlet as this could result in fire or

electric shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of

the appliance, and have the cord replaced

with an exact replacement part by an

authorized service. Protect the power cord

from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where

the cord exits the appliance. Do not move

the TV with the power cord plugged in. Do

not use a damaged or loose power cord. Be

sure do grasp the plug when unplugging the

power cord. Do not pull on the power cord

to unplug the TV.

Warning

- To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Do not expose to dripping or splashing and

do not place objects filled with liquids, such

as vases, cups, etc. on or over the apparatus

(e.g. on shelves above the unit).

Grounding

Ensure that you connect the earth ground

wire to prevent possible electric shock

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

grounded AC outlet). If grounding methods

are not possible, have a qualified electrician

install a separate circuit breaker. Do not try to

ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker

DISCONNECTING DEVICE FROM THE MAIN

POWER

The power outlet must remain readily

accessed in the event the device needs to

be unplugged.

As long as this unit is connected to the AC

wall outlet, it is not disconnected from the

AC power source even if the unit is turned

off.

Do not attempt to modify this product in any

way without written authorization from LG

Electronics. Unauthorized modification could

void the user’s authority to operate this

product.

ANTENNAS Outdoor antenna grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity

of overhead power lines or other electric light

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

U.S.A. provides information with respect to

proper grounding of the mast and supporting

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

NEC: National Electrical Code

Ground Clamp

Antenna Lead in Wire

Antenna Discharge Unit

(NEC Section 810-20)

Grounding Conductor

(NEC Section 810-21)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Electric Service

Equipment

Ground Clamp

Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals

such as alcohol, thinners or benzine.

Moving

Make sure the product is turned off,

unplugged and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.

Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

product with cloth or other materials while

plugged. Do not install in excessively dusty

places.

If you smell smoke or other odors coming

from the TV, unplug the power cord contact

an authorized service center.

Do not press strongly upon the panel with

hand or sharp object such as nail, pencil or

pen, or make a scratch on it.

Keep the product away from direct sunlight.

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Dot Defect

The Plasma or LCD panel is a high

technology product with resolution of two

million to six million pixels. In a very few

cases, you could see fine dots on the screen

while you’re viewing the TV. Those dots

are deactivated pixels and do not affect the

performance and reliability of the TV.

Generated Sound

“Cracking” noise: A cracking noise that

occurs when watching or turning off the TV

is generated by plastic thermal contraction

due to temperature and humidity. This noise

is common for products where thermal

deformation is required.

Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies a

large amount of current to operate a product.

It varies depending on the product.

This generated sound does not affect the

performance and reliability of the product.

Take care not to touch the ventilation

openings. When watching the TV for a long

period, the ventilation openings may become

hot. This does not affect the performance of

the product or cause defects in the product.

Viewing 3D Imaging (For 3D TV)

- When viewing 3D imaging, watch the TV

from an effective viewing angle and within

the appropriate distance. If you exceed this

viewing angle or distance, you may not be

able to view the 3D imaging. Furthermore,

the 3D imaging may not display if it is viewed

while you are lying down.

- If you watch the 3D imaging too closely or

for a long period of time, it may harm your

eyesight.

- Watching the TV or playing video games

that incorporate 3D imaging with the 3D

glasses for a long period of time can cause

drowsiness, headaches or fatigue to you

and/or your eyes. If you have a headache,

or otherwise feel fatigued or drowsy, stop

watching the TV and take a rest.

- Pregnant woman, seniors, persons with

heart problems or persons who experience

frequent drowsiness should refrain from

watching 3D TV.

- Some 3D imaging may cause you to duck

or dodge the image displayed in the video.

Therefore, it is best if you do not watch 3D

TV near fragile objects or near any objects

that can be knocked over easily.

- Please prevent children under the age of

5 from watching 3D TV. It may affect their

vision development.

- Warning for photosensitization seizure: Some

viewers may experience a seizure or epilepsy

when exposed to certain factors, including

flashing lights or images in TV or video

games. If you or anybody from your family

has a history of epilepsy or seizure, please

consult with your doctor before watching 3D

TV.

Also certain symptoms can occur in

unspecified conditions without any previous

history. If you experience any of the following

symptoms, immediately stop watching the

3D imaging and consult a doctor: dizziness or

lightheadedness, visual transition or altered

vision, visual or facial instability, such as eye

or muscle twitching, unconscious action,

convulsion, loss of conscience, confusion

or disorientation, loss of directional sense,

cramps, or nausea. Parents should monitor

their children, including teenagers, for these

symptoms as they may be more sensitive to

the effects of watching 3D TV.

Risk of photosensitization seizure can be

reduced with the following actions.

- Take frequent breaks from watching 3D TV.

- For those who have vision that is different

in each eye, they should watch the TV after

taking vision correction measures.

- Watch the TV so that your eyes are on the

same level as the 3D screen and refrain from

sitting too closely to the TV.

- Do not watch the 3D imaging when tired or

sick, and avoid watching the 3D imaging for a

long period of time.

- Do not wear the 3D glasses for any other

purpose than viewing 3D imaging on a 3D TV.

- Some viewers may feel disoriented after

watching 3D TV. Therefore, after you watch

3D TV, take a moment to regain awareness

of your situation before moving.

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

LCD

If the TV feels cold to the touch, there may

be a small “flicker” when it is turned on. This

is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains

a small amount of mercury. Do not dispose of

this product with general household waste.

Disposal of this product must be carried out

in accordance to the regulations of your local

authority.

Preventing “Image burn” or “Burn-in” on your TV screen

If a fixed image displays on the TV screen for

a long period of time, it will be imprinted and

become a permanent disfigurement on the

screen. This is “image burn” or “burn-in” and

not covered by the warranty.

If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on

the letterboxed area of the screen.

Avoid displaying a fixed image on the TV screen

for a long period of time (2 or more hours for

LCD,

1 or more hours for the Plasma TV) to prevent

image burn.

ENG

ENGLISH

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

7 TABLE OF CONTENTS

7 Additional information of the manual

8 ASSEMBLING AND PREPARING

8 Unpacking

10 Optional Extras

11 Parts and buttons

17 Lifting and moving the TV

17 Setting up the TV

17 - Attaching the stand

17 - If you are not mounting the TV to a wall,

use the following instructions to attach

the stand.

22 - Mounting on a table

22 - Mounting on a wall

24 REMOTE CONTROL

28 WATCHING TV

28 Connecting to an antenna or cable

28 - Connecting an antenna or basic cable

28 Connecting to the AC/DC adapter

28 Turning the TV on for the first time

29 Watching TV

30 Using the quick menu

31 3D IMAGING (FOR 3D TV)

31 3D Technology

32 - When using 3D Glasses

32 - 3D Imaging Viewing Range

33 Viewing 3D Imaging

35 CUSTOMIZING TV SETTINGS

35 The Main Menus

36 OPEN SOURCE SOFTWARE NOTICE

36 MAKING CONNECTIONS

37 Connection overview

38 Connecting to a HD receiver, DVD, or VCR

player

38 - HDMI Connection

38 - DVI to HDMI Connection

39 - Component Connection

39 - Composite Connection

40 Connecting to a PC

40 - HDMI Connection

40 - DVI to HDMI Connection

41 - RGB Connection

42 ENTERTAINMENT

42 - Connecting USB storage devices

43 - Browsing files

45 TROUBLESHOOTING

47 SPECIFICATIONS

Additional information of the

manual

Viewing the owner’s manual

The owner’s manual in a PDF file format is

supplied on a CD. Install the Adobe Acrobat

Reader to view the owner’s manual on your PC.

Insert the supplied CD.

The web page appears automatically.

Click Owner’s Manual on the web page.

View the owner’s manual.

NOTE

If the web page does not appear

automatically, access My computer and then

click LG and

index.htm

to view the owner’s

manual.

NOTE

Plasma

: Plasma TV

LCD

LED LCD TV, LCD TV

Image shown may differ from your TV.

Your TV’s OSD (On Screen Display) may

differ slightly from that shown in this manual.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local

dealer where you purchased your product. The illustrations in this manual may differ from the actual

product and item.

PT250B, PT350B, PW350B, PV550B series

Screw for assembly Cable holder Power Cord holder

Power Cord Protection cover Protection cover tape

M4 x 26 M5 x 14.5

M4 x 28 M5 x 24

(For 60PV550B)

(Other models)

x 4 x 3

Remote control and batteries (AAA) Owner’s manual CD manual

Polishing cloth

(Depending on model)

RF Adapter

(Some models)

EzSign TV Editor

S/W & Manual

1 Gently wipe the spots on the cabinet with the polishing cloth.

2 Connect it to the antenna wire after fixing in Antenna Input. This adapter is for supplied in Argentina.

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

CHVOL

FAV

MUTE

1 2 3

4 5 6

7 8

MARK

LIST

FLASHBK

ENERGY

SAVING

AV MODE

INPUT

(For LK430B series)

ENG

ENGLISH

ASSEMBLING AND PREPARING

LK330, LK331C, LK334C, LK430, LK430B, LK450, LK451C, LK950 series

Screw for assembly Screw for fixing Protection cover Power Cord

FPR 3D Glasses

M4 x 20

x 8

(Except 47LK450,

47LK950)

(For LK950 series)

1 The number of 3D glasses may differ depending on the model or country.

19/22/26LV2500, 26LV255C series

Screw for assembly Cable holder

(Depending on model)

Power Cord

AC/DC Adapter

M4 x 16

x 2

M4 x 6

x 2

32LV2500, 32LV255C, LV3400, LV345C, LV3500, LW4500 series

Screw for assembly Composite gender cable Cable holder

(Depending on model)

Screw for fixing

FPR 3D Glasses

M4 x 14

x 8

(For 32LV2500, 32LV255C,

32/37LV3500, 32LV3400,

32LW4500)

M4 x 12

x 8

(32LV2500,

32LV255C)

(Except LV3400,

LV345C series)

(Other models)

1 The number of 3D glasses may differ depending on the model or country.

(For LW4500 series)

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

The items supplied with your product may vary depending on the model.

Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

(

LCD

) For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm

(0.39 inches) thick and 18 mm (0.7 inches) width.

*A 10 mm (0.39 inches)

18 mm (0.7 inches)

CAUTION

Do not use any unapproved items to ensure the safety and product life span.

Any damages or injuries by using unapproved items are not covered by the warranty.

In case of some model, the thin film on screen is a part of TV, So don’t take it off.

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

This device only works with compatible LG Plasma TV, LED LCD TV or LCD TV.

3D Glasses

(AG-S230, AG-S250, AG-S270)

FPR 3D Glasses

(AG-F2**)

1 Supports PW350B series

2 Supports LW4500, LK950 series

The model name or design may be changed depending on the upgrade of product functions,

manufacturer’s circumstances or policies.

ENG

ENGLISH

ASSEMBLING AND PREPARING

Parts and buttons

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

PT250B, PT350B, PW350B, PV550B series

ENTER

VOL

HOME

INPUT

Screen

Speakers

Touch buttons

Remote control and

intelligent

sensors

ENG

ENGLISH

ASSEMBLING AND PREPARING

32LV2500, 32LV255C, LV3500, LW4500 series

NOTE

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

ENTER

VOL

HOME

INPUT

Screen

Touch buttons

Power indicator

Remote control and

intelligent

sensors

Speakers

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

19/22/26LV2500, 26LV255C series

ENTER

VOL

HOME

INPUT

Screen

Touch buttons

Power indicator

Remote control and

intelligent

sensors

Speakers

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Touch button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2 All of the buttons are touch sensitive and can be operated through simple touch with your finger.

LK450, LK451C series

47LK550-DA Rear AV

ENTER

VOL

HOME

INPUT

COMPONENT IN

VIDEO

AUDIO

AV IN 1

L/MONO

ANTENNA

CABLE

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

OPTICAL DIGITAL

AUDIO OUT

(RGB/DVI)

AUDIO IN

/ DVI IN

VIDEO

AUDIO

Screen

Touch buttons

Power indicator

Remote control and

intelligent

sensors

Speakers

ENG

ENGLISH

ASSEMBLING AND PREPARING

LK330, LK331C, LK334C series

32/37/42/47LK450-UB Rear AV

32/37/42/47LK450-UB Side AV

HOME

ENTER

VOL

INPUT

HOME

ENTER

VOL

ENTER

HOME

INPUT

Screen

Speakers

Buttons

Power indicator

Remote control

LK430, LK430B series

VOL

ENTER

HOME

INPUT

Screen

Speakers

NOTE

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

Power indicator

Remote control

Buttons

ENG

ENGLISH

ASSEMBLING AND PREPARING

NOTE

You can set the power indicator light to on or off by selecting

OPTION

in the main menus.

Button

Description

Turns the power on or off.

INPUT Changes the input source.

HOME Accesses the main menus, or saves your input and exits the menus.

ENTER

⊙

Selects the highlighted menu option or confirms an input.

- VOL + Adjusts the volume level.

Scrolls through the saved channels.

1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

Power indicator

32/37/42/47LK450-UB Rear AV

32/37/42/47LK450-UB Side AV

HOME

ENTER

VOL

INPUT

VOL

ENTER

HOME

INPUT

VOL

ENTER

HOME

INPUT

LV3400, LV345C series

Screen

Buttons

Remote control and

intelligent

sensors

Speakers

Power indicator

INPUT

HOME

ENTER

VOL

LK950 series

Screen

Buttons

Remote control and

intelligent

sensors

Speakers

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for save transportation regardless of

its type and size.

CAUTION

Avoid touching the screen at all times, as

this may result in damage to the screen.

It is recommended to move the TV in the

box or packing material that the TV originally

came in.

Before moving or lifting the TV, disconnect

the power cord and all cables.

When holding the TV, the screen should face

away from you to prevent the screen from

scratches.

Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.

When transporting a large TV, there should

be at least 2 people.

When transporting the TV by hand, hold the

TV as shown in the following illustration.

When transporting the TV, do not expose the

TV to jolts or excessive vibration.

When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

Setting up the TV

Put your TV on a pedestal stand and mount the TV

on a table or wall.

Attaching the stand

If you are not mounting the TV to a wall, use the

following instructions to attach the stand.

PT250B, PT350B, PW350B, PV550B series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage. Make sure no objects press

against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Model Screw for

assembly

Number of

screws

42/50PT250B

42/50PT350B

42/50PW350B

50PV550B

M5 x 14.5 3

60PV550B M5 x 24 3

Stand Body

Stand Base

ENG

ENGLISH

ASSEMBLING AND PREPARING

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Model Screw for

assembly

Number of

screws

42/50PT250B

42/50PT350B

42/50PW350B

50PV550B

M4 x 26 4

60PV550B M4 x 28 4

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in

place.

Attach the protection cover tape.

- This will protect the opening from

accumulating dust and dirt.

- When installing the wall mounting bracket,

use the Protection cover.

Protection cover

Protection

cover tape

Secure the TV and the stand with the 4

screws.

Model Screw for

assembly

Number of

screws

42/50PT250B

42/50PT350B

42/50PW350B

50PV550B

M4 x 26 4

60PV550B M4 x 28 4

CAUTION

Tighten the screws firmly to prevent

the TV from tilting forward. Do not over

tighten.

ENG

ENGLISH

ASSEMBLING AND PREPARING

32LV2500, 32LV255C, LV3400, LV345C,

LV3500, LW4500 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage. Make sure no objects press

against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Model Screw for

assembly

Number of

screws

32LV2500,

32LV255C

M4 x 14 4

Stand Body

Stand Base

Model Screw for

assembly

Number of

screws

LV3400,

LV345C,

LV3500,

LW4500 series

M4 x 12 4

Stand Body

Stand Base

Secure the TV and the stand with the 4

screws.

Model Screw for

assembly

Number of

screws

32LV2500,

32LV255C

M4 x 14 4

LV3400,

LV345C,

LV3500,

LW4500 series

M4 x 12 4

CAUTION

Tighten the screws firmly to prevent

the TV from tilting forward. Do not over

tighten.

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Model Screw for

assembly

Number of

screws

32LV2500,

32LV255C

M4 x 14 4

LV3400,

LV345C,

LV3500,

LW4500 series

M4 x 12 4

ENG

ENGLISH

ASSEMBLING AND PREPARING

19/22/26LV2500, 26LV255C series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage. Make sure no objects press

against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Screw for assembly Number of screws

M4 x 6 2

Secure the TV and the stand with the 2

screws.

Screw for assembly Number of screws

M4 x 16 2

CAUTION

Tighten the screws firmly to prevent

the TV from tilting forward. Do not over

tighten.

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 2 screws and pull the stand away

from the TV.

Screw for assembly Number of screws

M4 x 16 2

Stand Body

Stand Base

ENG

ENGLISH

ASSEMBLING AND PREPARING

LK330, LK331C, LK334C, LK430, LK430B,

LK450, LK451C, LK950 series

Lay the TV with the screen side down on a flat

surface.

CAUTION

Lay a foam mat or soft protective cloth

on the surface to protect the screen from

damage. Make sure no objects press

against the screen.

Assemble the parts of the STAND BODY with

the STAND BASE of the TV.

Screw for assembly Number of screws

M4 x 20 4

Secure the TV and the stand with the 4

screws.

Screw for assembly Number of screws

M4 x 20 4

CAUTION

Tighten the screws firmly to prevent

the TV from tilting forward. Do not over

tighten.

To detach the stand,

Lay the TV with the screen side down on a flat

surface.

Remove the 4 screws and pull the stand away

from the TV.

Screw for assembly Number of screws

M4 x 20 4

Push the supplied protection cover into the

opening at the bottom of the TV until it locks in

place.

This will protect the opening from accumulating

dust and dirt.

When installing the wall mounting bracket, use

the Protection cover.

Protection cover

Stand Body

Stand Base

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a table

Lift and tilt the TV into its upright position on a

table.

- Leave a 10 cm (minimum) space from the

wall for proper ventilation.

10 cm

Connect the power cord to a wall outlet.

CAUTION

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

NOTE

Swivel 20 degrees to the left or right and

adjust the angle of the TV to suit your

view.

2020

Mounting on a wall

Attach an optional wall mount bracket at the rear

of the TV carefully and install the wall mount

bracket on a solid wall perpendicular to the

floor. When you attach the TV to other building

materials, please contact qualified personnel.

We recommend that you use an LG brand wall

mount when mounting the TV to a wall.

10 cm

Make sure to use screws and wall mounts that

meet the VESA standard. Standard dimensions for

the wall mount kits are described in the following

table.

Model 42/50PT250B

42/50PT350B

42/50PW350B

50PV550B

60PV550B

VESA 400 x 400 600 x 400

Standard screw M6 M8

Number of screws 4 4

Wall mount bracket

(optional)

PSW400B,

PSW400BG

PSW600B

ENG

ENGLISH

ASSEMBLING AND PREPARING

Model 19/22/26LV2500

26LV255C

26LK330

26LK331C

32LV2500

32LV255C

32LV3400

32LV3500

32LK330

32LK331C

32LK334C

32LK430

32LK430B

32LK450

32LK451C

32LW4500

VESA 100 x 100 200 x 100

Standard screw M4 M4

Number of screws 4 4

Wall mount bracket

(optional)

LSW100B,

LSW100BG

LSW100B,

LSW100BG

Model 37LV3500

37/42/47LK450

37/42LK451C

47LK950

42/47/55LV3500

42/47LW4500

VESA 200 x 200 400 x 400

Standard screw M6 M6

Number of screws 4 4

Wall mount bracket

(optional)

LSW200B,

LSW200BG

LSW400B,

LSW400BG

Model 42LV3400

42LV345C

VESA 400 x 400

Standard screw M6

Number of screws 4

Wall mount bracket

(optional)

LSW400BX,

LSW400BXG

ENG

ENGLISH

REMOTE CONTROL

Make sure to point the remote control toward at the remote control sensor on the TV.

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching

the

and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

(POWER)

Turns the TV on or off.

ENERGY SAVING

Adjusts the Energy Saving settings.

AV MODE

Selects an AV mode.

INPUT

Rotates through inputs.

Also switches the TV on from standby.

Returns to the last TV channel.

Number button

Enters numbers.

LIST

Accesses the saved channel list.

- (Dash)

Inserts a dash between numbers such as 2-1 and 2-2.

Q.VIEW

Alternates between the two last channels selected (pressing repeatedly).

ENERGY

CHVOL

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

INFO

Home

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

CHAR/NUM

DELETE

Alphanumeric buttons

Enters letters and numbers.

LIST

Accesses the saved channel list.

- (Dash)

Inserts a dash between numbers such as 2-1 and 2-2.

Q.VIEW

Alternates between the two last channels selected (pressing repeatedly).

ENG

ENGLISH

REMOTE CONTROL

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

VOL

Adjusts the volume level.

MARK

Selects a menu or option.

FAV

Accesses your favorite channel list.

(For 3D TV)

Used for viewing 3D video.

MUTE

Mutes all sounds.

Scrolls through the saved channels.

PAGE

Moves to the previous or next screen.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

Q.VIEW

LIST

FREEZE

ENTER

GUIDE

Q.MENU

INFO

BACK

EXIT

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

INFO

Home

VOL

Adjusts the volume level.

MARK

Selects a menu or option.

FAV

Accesses your favorite channel list.

RATIO

Resizes an image.

MUTE

Mutes all sounds.

Scrolls through the saved channels.

PAGE

Moves to the previous or next screen.

PORTAL

Displays the EzSign content on a TV Screen. (For LK430B series)

Displays and removes hotel interactive menu. (Other models)

ENERGY

CHVOL

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

INFO

Home

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

CHAR/NUM

DELETE

VOL

Adjusts the volume level.

MARK

Selects a menu or option.

FAV

Accesses your favorite channel list.

CHAR/NUM

Switches between Letter and Number input modes.

(For 3D TV)

Used for viewing 3D video.

MUTE

Mutes all sounds.

DELETE

Deletes letters and numbers.

Scrolls through the saved channels.

PAGE

Moves to the previous or next screen.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

PORTAL

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

Q.MENU

INFO

GUIDE

RATIO

ENG

ENGLISH

REMOTE CONTROL

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

GUIDE

Shows Contents List in EzSign mode. (EzSign V1.5 or Later) (For

LK430B series)

Displays the program event according to time scheduler. (Other models)

Home

Accesses the main menus, or saves your input and exit the menus.

Q. MENU

Accesses the quick menu.

Navigation buttons

(up/down/left/right)

Scrolls through menus or options.

BACK

Allows the user to move back one step in an interactive application or

other user interaction function.

INFO

Shows or hides the information on TV remote control buttons in EzSign

mode. (For LK430B series)

Views the information of the current program and screen. (Other

models)

EXIT

Clears all on-screen displays and returns to TV viewing.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

Colored buttons

These access special functions in some menus.

3D SETTING

(For 3D TV)

Used for viewing 3D video.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

BACK

EXIT

ENTER

Q.MENU

INFO

Home

TV/

RAD

RATIO

Q.VIEW

GUIDE

SUBTITLE

FREEZE

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

PORTAL

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

Q.MENU

INFO

GUIDE

RATIO

ENG

ENGLISH

REMOTE CONTROL

Control buttons

Controls the SIMPLINK compatible devices (USB,SIMPLINK).

FREEZE

(

Plasma

)

Freezes the current frame (Not supported when using USB Mode and

Simplink.).

SIMPLINK

Accesses the AV devices connected to the TV;

Opens the SIMPLINK menu.

RATIO

Resizes an image.

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

FREEZE

INFO

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

Q.VIEW

LIST

FREEZE

ENTER

GUIDE

Q.MENU

INFO

BACK

EXIT

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

INFO

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

Q.VIEW

LIST

FREEZE

ENTER

GUIDE

Q.MENU

INFO

BACK

EXIT

Home

ENERGY

CHVOL

1 2 3

4 5 6

7 8

SAVING

AV MODE

INPUT

FAV

RATIO

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

INFO

Home

FREEZE

ENERGY

CHVOL

SAVING

AV MODE

INPUT

FAV

MUTE

MARK

LIST

Q.VIEW

BACK

EXIT

ENTER

GUIDE

Q.MENU

RATIO

3D SETTING

INFO

Home

1 2 ABC 3 DEF

4 GHI 5 JKL 6

MNO

PQRS

8 TUV

WXYZ

CHAR/NUM

DELETE

ENG

ENGLISH

WATCHING TV

Connecting to an antenna or

cable

Connect an antenna, cable, or cable box to watch

TV while referring to the following. The illustrations

may differ from the actual items and a RF cable is

optional.

Connecting an antenna or basic

cable

Connect the TV to a wall antenna socket with an

RF cable (75

ANTENNA

CABLE

NOTE

Use a signal splitter to use more than 2 TVs.

Visit http://lgknowledgebase.com for more

information about the antenna and cable

connection. Search for antenna.

Connecting to the AC/DC

adapter

(For 19/22/26LV2500, 26LV255C)

Connect the AC/DC adapter plug to the power

input jack on the TV.

Connect the power cord to the AC/DC adapter

first, then plug the power cord into the wall

power outlet.

CAUTION

Please be sure to connect the TV to the AC/

DC power adapter before connecting the

TV’s power plug to a wall power outlet.

Turning the TV on for the first

time

When you turn the TV on for the first time, the

Initial setting screen appears. Select a language

and customize the basic settings.

Connect the power cord to a power outlet.

The Power indicator turns red and the TV

switches to Standby mode.

In Standby mode, press the power button on

the remote control to turn the TV on.

The Initial setting screen appears if you turn

the TV on for the first time.

NOTE

You can also access

Initial Setting

accessing

OPTION

in the main menu.

ENG

ENGLISH

WATCHING TV

Follow the on-screen instructions to customize

your TV settings according to your preferences.

Language

Selects a language to

display.



Mode Setting

Selects

Home Use

for

the home environment.

(Depending on model)



Power Indicator

Sets the standby light.

(For LED LCD TV)



Time Zone

Selects the time zone

and daylight saving.



Auto Tuning

Scans and saves available

channels automatically.

NOTE

To display images in the best quality for

your home environment, select

Home

Use

Store Demo

is suitable for the retail

environment.

If you select

Store Demo

, any

customized settings will switch back to

the default settings of

Store Demo

in 5

minutes.

Power Indicator

feature is disabled in

Store Demo mode.

When the basic settings are complete,

press

ENTER

NOTE

If you do not complete the Initial setting,

it will appear whenever the TV turns on.

Disconnect the power cord from the

power outlet when you do not use the

TV for a long period of time.

To turn the TV off, press the power button on

the remote control.

Watching TV

In Standby mode, press the power button on

the remote control to turn the TV on.

Press

INPUT

and select TV.

Control the TV using the following buttons

while you are watching TV.

Button Description

CH (^, v)

Scrolls through saved channels.

LIST

Selects a channel on the saved

channel list.

0 - 9

Selects a channel by entering

numbers.

VOL (+, -)

Adjusts the volume level.

MUTE

Mutes all sounds.

AV MODE

Selects an AV mode.

Q.MENU

Accesses the quick menus.

Q.VIEW

Alternates between the last two

channels selected.

RATIO

Resizes an image.

FREEZE

(

Plasma

)

Freezes the current frame while you

are watching TV.

1 The Lock icon (

ꔒ

) appears in front of a

channel blocked with parental control.

2 Each

AV mode

has the optimized image and

sound settings. If you select

Off

, the image

and sound settings will be restored to the

previously customized settings.

To turn the TV off, press the power button on

the remote control.

The TV switches to Standby mode.

ENG

ENGLISH

WATCHING TV

Using the quick menu

Customize frequently used menus.

Press

Q. MENU

to access the quick menus.

Press the Navigation buttons to scroll through

the following menus.

16:9 �

◀ Aspect Ratio ▶

Menu Description

Aspect Ratio Changes the image size.

Picture Mode

(Depending

on model)

Changes the image mode.

Sound Mode Changes the sound mode.

Multi Audio Changes the audio language

(Digital signal).

SAP Changes the MTS sound (Analog

signal).

Sleep Timer Sets the length of time until the

TV to turns off.

Del/Add Edits the channels to add or delete

the channel.

Caption Activates or deactivate the

subtitles.

USB Device Selects “Eject” in order to eject

USB device. If EzSign Content is

running via USB, it may not work

correctly after “USB Eject” has

been selected. So please remove

the attached USB Immediately

after “USB Eject” has selected.

(For LK430B series)

Ejects a USB device when a USB

device is connected.

(Other models)

NOTE

The available menus and options may

differ from the input source that you are

using.

Press the Navigation buttons to scroll to the

option you want.

When you are finished, press

Q. MENU

ENG

ENGLISH

3D IMAGING

3D IMAGING (FOR 3D

TV)

3D Technology

This TV can display in 3D via 3D broadcasting or

when the TV is connected to a compatible device,

such as a Blu-ray 3D Player. The viewer must

wear compatible 3D glasses in order to see these

images in 3D format.

When watching 3D imaging

(

LCD

)

We recommend that you maintain a distance

of at least twice the screen diagonal length

when watching 3D videos.

To watch the TV in 3D, you must put on your

3D glasses. For best results, you should

wear LG Brand 3D glasses. The 3D imaging

may not display properly when using another

brand of 3D glasses. Please see the 3D

glasses manual for instructions on how to

use the 3D glasses.

When watching 2D images, it is

recommended to take off the 3D glasses. If

you watch 2D images with the 3D glasses

on, you may see distorted images.

(

Plasma

)

After powering on the TV, a few seconds

may be needed for your TV to calibrate.

The TV may flicker slightly if the 3D imaging

is displayed under 3 wavelength fluorescent

light (50 Hz - 60 Hz) or magnetic fluorescent

lamp (50Hz - 60 Hz). In such instances, it is

recommended to turn the lights off.

If there is an obstacle between the TV and

the 3D glasses, the 3D imaging may not

display properly.

Do not use the TV in close proximity to other

electronic equipments and RF equipments.

The 3D imaging may not display if it is

viewed while you are lying down.

It may take a moment for you to see the

3D imaging if you look away from the TV

and then revert your eyes back to the 3D

program.

To watch the TV in 3D, you must put on your

3D glasses. For best results, you should

wear LG Brand 3D glasses. The 3D imaging

may not display properly when using another

brand of 3D glasses. Please see the 3D

glasses manual for instructions on how to

use the 3D glasses.

When watching 2D images, it is

recommended to take off the 3D glasses. If

you watch 2D images with the 3D glasses

on, you may see distorted images.

NOTE

If 3D TV broadcast standard changes in the

future and it is not supported by this TV set,

you may need a separate device, such as a

set-top-box.

ENG

ENGLISH

3D IMAGING

When using 3D Glasses

CAUTION

3D glasses are sold separately. Refer to the

3D glasses manual for operating instructions.

Do not use the 3D glasses to replace your

corrective glasses, sunglasses or protective

goggles.

Do not store the 3D glasses in hot or cold

locations.

Do not drop objects onto the 3D glasses. Do

not drop or bend the glasses.

Since the lenses of the 3D glasses are

easily scratched, make sure to clean only

with a soft cloth. Shake off any dust before

using the cloth since the glasses are easily

scratched.

3D Imaging Viewing Range

(For Plasma TV)

TV size, viewing angle & other circumstances

may change the viewing distance and the angle of

view.

Viewing Distance Viewing Angle

2 m - 10 m

(6.5 ft - 32.8 ft)

120 ° (When the viewing

distance is 2 m (6.5 ft))

ENG

ENGLISH

3D IMAGING

Viewing 3D Imaging

View 3D mode for 3D images

Play the 3D video or select 3D channel.

(2D to 3D mode is available with all contents.)

Press 3D and select same type in your

displayed picture on the screen.

(Select type on “3D Video” tab.)

3D Video 2D Video

NOTE

Turn on the 3D mode automatically for HDMI

input playing the 3D blueray titles.

Press

ENTER

on displayed information

window.

Enter Cancel

Power on your 3D glasses and put them on.

Sit 2 meters from TV to enjoy the best 3D

view.

ꔅ 3D Setting

Enter Cancel

Put on the 3D glasses.

Sit 2 meters from TV to enjoy the best 3D

view.

ꔅ 3D Setting

To turn off the 3D mode, press 3D and select

ENTER

Enter Cancel

Turn off 3D Mode.

ꔅ 3D Setting

2D mode

View 2D mode for 3D images

Play the 3D video or select 3D channel.

Press 3D and select same type in your

displayed picture on the screen.

(Select type on “2D Video” tab.)

3D Video 2D Video

To turn off the 2D mode, press 3D and select

ENTER

Enter Cancel

Turn off 2D Mode.

3D video

Using 3D quick menu option

Press

3D SETTING

Use the following options while viewing 3D

imaging.

Button

(Depending on model)

Description

3D Picture Size

Cuts off the outer edges of the

picture and stretch it to fit the full

screen in 3D mode.

3D Depth

Adjusts the distance between the

object and the background in the

picture to enhance the 3D effect in

2D to 3D mode.

3D Viewpoint

Brings the picture (including both the

object and background images) to

the front or back to enhance the 3D

effect in 3D mode.

3D Picture

Balance

Adjusts the color and brightness

difference between the right and left

sides of the picture in 3D mode.

3D Picture

Correction

Changes the order of images in the

right and left sides of the picture in

3D mode.

ENG

ENGLISH

3D IMAGING

CAUTION

Some menus may not work while watching

the TV in 3D.

The 3D imaging mode is disabled

automatically when switching DTV channels.

The screen may not be displayed properly

if you view 2D DTV images in 3D imaging

mode.

3D effect can be seen when 3D Mode is

selected appropriately for the 3D input signal

supplied to the TV.

For *mpo files (3D camera files), the 3D

imaging mode is enabled automatically.

3D may not be displayed properly for some

PC graphics cards.

NOTE

(

LCD

)

If you select 3D mode, “Power indicator” is

turned off automatically.

While watching 3D imaging, you cannot

adjust video/audio settings using the menu.

You can only choose “Standard

→

Cinema

→

Game” with the

AV MODE

button on the

remote control.

AV Mode

is set as

Standard

while playing in 3D.

If you’d like to play the BGM using *.mpo

file(3D camera file), In advance, the contents

path for BGM should be set on full-sized

photo view screen which isn’t *.mpo file(3D

camera file).

Picture mode is set as Standard, Energy

Saving Off if entering to 3D mode.

ENG

ENGLISH

CUSTOMIZING SETTINGS

CUSTOMIZING TV SETTINGS

The Main Menus

Press

Home

to access the main menus.

Press the Navigation buttons to scroll to one of the following menus and press

ENTER

Press the Navigation buttons to scroll to the setting or option you want and press

ENTER

When you are finished, press

EXIT

CHANNEL PICTURE AUDIO TIME

PICTURE

Adjusts the image size,

quality, or effect.

AUDIO

Adjusts the sound quality,

effect, or volume level.

TIME

Sets the time, date,

or Timer feature.

MY MEDIA

INPUT

Views the input sources

with their labels.

OPTION

Customizes the general

settings.

LOCK

Locks or unlocks

channels and programs.

CHANNEL

Sets up and edit

channels.

LOCK

OPTION

INPUT MY MEDIA

ENG

ENGLISH

MAKING CONNECTIONS

Connect various external devices to the TV and switch input modes to select an external device. For more

information of external device’s connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,

gaming devices, and other external devices.

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable

to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual

provided with the connected device.

The external device connection may differ from the model.

Connect external devices to the TV regardless of the order of the TV port.

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this

product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are

available for download.

ENG

ENGLISH

MAKING CONNECTIONS

Connect various external devices to the TV and switch input modes to select an external device. For more

information of external device’s connection, refer to the manual provided with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,

gaming devices, and other external devices.

NOTE

If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable

to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual

provided with the connected device.

The external device connection may differ from the model.

Connect external devices to the TV regardless of the order of the TV port.

Connection overview

Connect various external devices to the ports on the TV back panel.

Find an external device you want to connect to your TV as shown on the following illustration.

Check the connection type of the external device.

Go to the appropriate illustration and check the connection details.

NOTE

If you connect a gaming device to the TV, use the cable supplied with the gaming device.

Refer to the external equipment’s manual for operating instructions.

HD Receiver

DVD

VCR

Speaker

USB

Gaming device

ENG

ENGLISH

MAKING CONNECTIONS

This part of MAKING CONNECTIONS mainly

uses picture for PW350B, LV3500 series.

Connecting to a HD receiver,

DVD, or VCR player

Connect a HD receiver, DVD, or VCR player to the

TV and select an appropriate input mode.

HDMI Connection

Transmits the digital video and audio signals from

an external device to the TV. Connect the external

device and the TV with the HDMI cable as shown

in the following illustration.

NOTE

Use the latest High Speed HDMI™ Cable

with CEC (Customer Electronics Control)

function.

High Speed HDMI™ Cables are tested to

carry an HD signal up to 1080p and higher.

PW350B series

ANTENNA

CABLE IN

-2

(CONTROL & SERVICE)

GB IN

(

)

(

RGB/DVI

)

OPTICA

DIGITA

UDIO OUT

DVI IN

IDE

( )

(

MONO

)

IDEO

UDI

COMPONENT I

V IN

ANTENNA IN

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

AUDIO IN

(RGB/DVI)

OPTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO

AUDIO

COMPONENT IN

AV IN 1

Y PB PR

HDMI

LV3500 series

B I

LAN

NTENN

ABLE

-2

(CO

NTR

ERVI

)

GB IN

(

PC)

(

RGB/DVI)

UDI

PTI

ITA

UDI

IDE

COMPONENT I

IDE

V IN

/ DVI IN

V IN

IDE

HDMI

DVI to HDMI Connection

Transmits the digital video signal from an external

device to the TV. Connect the external device and

the TV with the DVI-HDMI cable as shown in the

following illustration. To transmit an audio signal,

connect an audio cable.

PW350B series

ANTENNA

ABLE IN

RS-232C IN

(CONTROL & SERVICE)

B IN

(

(RGB/DVI)

OPTICA

DIGITA

UDIO OUT

/DVI IN

IDE

( )

(

MONO

)

IDEO

UDI

COMPONENT I

V IN

AUDIO IN

(RGB/DVI)

AUDIO OUT

DVI OUT

LV3500 series

B I

LAN

OPTICAL DIGITAL

AUDIO

OUT

PTICAL

DIGIT

TICAL DIGIT

ANTENNA

ABLE

-2

ONTROL & SERVICE)

GB IN

(

PC)

(RGB/DVI)

OPTICAL

ITA

UDI

IDE

OMPONENT I

IDE

UDI

V IN

DVI IN

V IN 2

IDEO / AUDIO

AUDIO OUT

DVI OUT

IN 3

USB IN

LAN

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

AV IN 2

AUDIO / VIDEO

H/P

ANTENNA

CABLE

RS-232C IN

(CONTROL & SERVICE)

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

OPTICAL

DIGITAL

AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

VIDEO

AUDIO

L(MONO)

AV IN 1

/ DVI IN

2 1

(RGB/DVI)

AUDIO IN

ENG

ENGLISH

MAKING CONNECTIONS

Component Connection

Transmits the analog video and audio signals from

an external device to the TV. Connect the external

device and the TV with the component cable as

shown in the following illustration.

PW350B series

ANTENNA

ABLE IN

RS-232C IN

(CONTROL & SERVICE)

B IN

(

(RGB/DVI)

OPTICA

DIGITA

UDIO OUT

/DVI IN

IDE

( )

(

MONO

)

IDEO

UDI

COMPONENT I

V IN

Y PB PR

VIDEO

AUDIO

L R

LV3500 series

B I

LAN

OPTICAL DIGITAL

AUDIO

OUT

PTICAL

DIGIT

TICAL DIGIT

ANTENNA/

CABLE

ANTENNA

ABLE

-2

(CO

NTR

ERVI

)

GB IN

(

PC)

(RGB/DVI)

UDI

PTI

ITA

UDI

IDE

COMPONENT I

IDE

V IN

DVI IN

V IN 2

IDE

VIDEO

AUDIO

L R

Composite Connection

Transmits the analog video and audio signals from

an external device to the TV. Connect the external

device and the TV with the composite cable as

shown in the following illustration.

PW350B series

NTENNA I

ABLE IN

RS-232C IN

(CONTROL & SERVICE)

B IN

(

RGB/DVI

)

OPTICA

DIGITA

UDIO OUT

/DVI IN

IDE

( )

(

MONO

)

IDE

UDI

COMPONENT I

V IN

VIDEO

AUDIO

L(MONO)

COMPONENT IN

AV IN 1

MONO

( )

AUDIOL R

VIDEO

LV3500 series

B I

LAN

OPTICAL DIGITAL

AUDIO

OUT

PTICAL

DIGIT

TICAL DIGIT

ANTENNA/

CABLE

ANTENNA

NTENN

ABLE

-2

(

CONTROL & SERVICE

)

B IN

(

PC)

(

RGB/DVI)

UDI

PTI

ITA

UDI

IDE

COMPONENT I

IDE

UDI

V IN

DVI I

V IN

IDEO / AUDI

LAN

VIDEO

AUDIO

AV IN 1

IN 3

USB IN

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

AV IN 2

AUDIO / VIDEO

H/P

ANTENNA

CABLE

RS-232C IN

(CONTROL & SERVICE)

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

OPTICAL

DIGITAL

AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

VIDEO

AUDIO

L(MONO)

AV IN 1

/ DVI IN

2 1

AUDIO

VIDEO

MONO

( )

L/MONO

(For only 32LV2500, 32LV255C, LV3500, LW4500

series)

B I

H/P

ANTENNA

ABLE

RS-232C IN

(CONTROL & SERVICE)

GB IN

(

PC)

(RGB/DVI)

PTI

ITA

OUT

IDE

COMPONENT I

IDE

V IN

DVI IN

V IN

IDE

VIDEO

AUDIO

L (MONO)

AV IN 2

VIDEO / AUDIO

NOTE

If cables are installed incorrectly, it could

case the image to display in black and white

or with distorted color. Check to ensure the

cable are matched with the corresponding

color connection.

ENG

ENGLISH

MAKING CONNECTIONS

Connecting to a PC

NOTE

It is recommended to use the TV set with

the HDMI connection for the best image

quality.

HDMI Connection

Transmits the digital video and audio signals from

your PC to the TV. Connect the PC and the TV

with the HDMI cable as shown in the following

illustration.

PW350B series

ANTENNA

CABLE IN

-2

(CONTROL & SERVICE)

GB IN

(

)

(

RGB/DVI

)

OPTICA

DIGITA

UDIO OUT

DVI IN

IDE

( )

(

MONO

)

IDEO

UDI

COMPONENT I

V IN

ANTENNA IN

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

RGB IN (PC)

AUDIO IN

(RGB/DVI)

OPTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO

AUDIO

COMPONENT IN

AV IN 1

Y PB PR

HDMI

LV3500 series

B I

LAN

NTENN

ABLE

-2

(CO

NTR

ERVI

)

GB IN

(

PC)

(

RGB/DVI)

UDI

PTI

DIGITAL

UDI

IDE

COMPONENT I

IDE

V IN

DVI IN

V IN

IDE

HDMI

DVI to HDMI Connection

Transmits the digital video signal from your PC to

the TV. Connect the PC and the TV with the DVI-

HDMI cable as shown in the following illustration.

To transmit an audio signal, connect an audio

cable.

PW350B series

ANTENNA

ABLE IN

RS-232C IN

(CONTROL & SERVICE)

B IN

(

(RGB/DVI)

OPTICA

DIGITA

UDIO OUT

/DVI IN

IDE

( )

(

MONO

)

IDEO

UDI

COMPONENT I

V IN

AUDIO IN

(RGB/DVI)

AUDIO OUT

DVI OUT

LV3500 series

B I

LAN

OPTICAL DIGITAL

AUDIO

OUT

PTICAL

DIGIT

TICAL DIGIT

ANTENNA

ABLE

-2

ONTROL & SERVICE)

GB IN

(

PC)

(RGB/DVI)

OPTICAL

ITA

UDI

IDE

OMPONENT I

IDE

UDI

V IN

DVI IN

V IN 2

IDEO / AUDIO

AUDIO OUT

DVI OUT

IN 3

USB IN

LAN

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

AV IN 2

AUDIO / VIDEO

H/P

ANTENNA

CABLE

RS-232C IN

(CONTROL & SERVICE)

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

OPTICAL

DIGITAL

AUDIO OUT

VIDEO

AUDIO

COMPONENT IN

VIDEO

AUDIO

L(MONO)

AV IN 1

/ DVI IN

2 1

(RGB/DVI)

AUDIO IN

ENG

ENGLISH

MAKING CONNECTIONS

RGB Connection

Transmits the analog video signal from your PC to

the TV. Connect the PC and the TV with the D-sub

15 pin signal cable as shown in the following

illustrations. To transmit an audio signal, connect

an audio cable.

PW350B series

ANTENNA

ABLE IN

RS-232C IN

(

CONTROL & SERVICE)

RGB IN (PC)

(

RGB/DVI

)

PTICA

DIGITA

UDIO OUT

DVI IN

IDE

( )

MONO

)

IDEO

UDI

COMPONENT I

V IN

ANTENNA IN

CABLE IN

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

/DVI IN

VIDEO

AUDIO

L(MONO)

VIDEO

AUDIO

COMPONENT IN

AV IN 1

Y PB PR

RGB IN (PC)

AUDIO IN

(RGB/DVI)

RGB OUT (PC)

AUDIO OUT

RGB IN (PC)

AUDIO IN

(RGB/DVI)

LV3500 series

B I

OPTICAL DIGITAL

AUDIO OUT

PTICAL

DIGIT

TICAL DIGIT

ANTENNA/

CABLE

ANTENNA

ABLE

-2

(CO

NTR

ERVI

)

GB IN

(

PC)

(

RGB/DVI)

UDI

PTI

ITA

UDI

IDE

COMPONENT I

IDE

AV IN 1

DVI I

RGB OUT (PC)

AUDIO OUT

IN 3

USB IN

OPTICAL DIGITAL

AUDIO OUT

ANTENNA/

CABLE IN

AV IN 2

AUDIO / VIDEO

H/P

ANTENNA

CABLE

RS-232C IN

(CONTROL & SERVICE)

OPTICAL

DIGITAL

AUDIO OUT

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

VIDEO

AUDIO

COMPONENT IN

VIDEO

AUDIO

L(MONO)

AV IN 1

/ DVI IN

2 1

RGB IN

(PC)

(RGB/DVI)

AUDIO IN

V IN

IDEO / AUDIO

NOTE

To get the best picture quality, adjust the PC

graphics card to

LCD

Model

Resolution

LV3500, LV3400, LV345C, LW4500,

LK450, LK451C, LK430, LK430B,

LK950 series

1920x1080

Other models

1360x768

Plasma

Model

Resolution

PV550B series

1920x1080

Other models

1024x768

Depending on the graphics card, DOS mode

may not work if a HDMI to DVI Cable is in

use.

In PC mode, there may be noise associated

with the resolution, vertical pattern, contrast

or brightness.

If noise is present, change the PC output to

another resolution, change the refresh rate

to another rate or adjust the brightness and

contrast on the PICTURE menu until the

picture is clear.

Avoid keeping a fixed image on the screen

for a long period of time. The fixed image

may become permanently imprinted on the

screen.

The synchronization input form for Horizontal

and Vertical frequencies is separate.

Depending on the graphics card, some

resolution settings may not allow the image

to be positioned on the screen properly.

When selecting HDMI-PC, set the “Input

Label - PC” in the INPUT menu.

ENG

ENGLISH

ENTERTAINMENT

(Depending on model)

Connecting USB storage devices

Connect USB storage devices such as a USB

flash drive or external hard drive to the TV and use

multimedia features.

Connect a USB flash drive or USB memory

card reader to the TV as shown in the following

illustration.

V IN 2

AUDIO

IDE

B IN

USB IN

To disconnect a USB storage device,

make sure to end the connection properly to

prevent damages to the TV or files.

Press

Q.MENU

to access the quick menus.

Press the Navigation buttons to scroll to

USB

Device

and press

ENTER

Disconnect the USB storage device only when

the message says that it is safe to remove.

CAUTION

Do not turn the TV off or remove a USB

storage device while the USB storage device

is connected to the TV, as this could result

in loss of files or damage to the USB storage

device.

Back up your files saved on a USB storage

device frequently, as you may lose or

damage the files and this may be not

covered by the warranty.

Tips for using USB storage devices

The TV recognizes only a USB storage

device.

If you connect a USB storage device to the

TV through a USB hub, your TV may not

recognize the USB storage device.

The TV may not recognize a USB storage

device that requires a special driver.

The recognition speed of a USB storage

device may differ depending on the device.

Only use a USB storage device which has

normal music or image files.

Use only USB storage devices that are

formatted as a FAT 32 or NTFS file system.

If you format a USB storage device as a

NTFS file system, you cannot delete the

saved files.

You may need to connect a USB storage

device to an external power supply with a

power adapter.

If the TV does not recognize a connected

USB storage device, replace the cable and

try again. Do not use an excessively long

cable.

The TV does not support some USB storage

devices properly.

You can use a multi-partition (up to 4) USB

storage device.

You can use up to 4 USB storage devices at

a time by using a USB multi-card reader.

The file alignment method of a USB storage

device is similar to the one of Window XP.

You cannot create or delete a folder saved in

a USB storage device directly on the TV.

The number of characters for a file name is

up to 100 English characters.

If there are too many folders and files in one

folder, it may not operate properly.

The recommended capacity for a USB

external hard disk is 1 TB or less and for a

USB storage device is 32 GB or less.

If a USB external hard disk with the Energy

Saving feature does not work, turn the USB

external hard disk off and on again to make

it work properly. For more information, refer

to the user manual of the USB external hard

disk.

USB storage devices below USB 2.0 are

supported as well. But they may not work

properly in the movie list.

The electrostatic can cause USB device’s

malfunction. In this case, USB Device has to

be plugged again.

ENG

ENGLISH

ENTERTAINMENT

Browsing files

Access the photo, music, or movie lists and

browse files.

Connect a USB storage device.

Press

Home

to access the main

menus.

Press the Navigation buttons to scroll to

MEDIA

and press

ENTER

Press Navigation buttons to scroll to

EzSign

MOVIE LIST

PHOTO

LIST

, or

MUSIC LIST

and press

ENTER

Movie List

MY MEDIA

Photo List Music List

EzSign TV

Select

Drive1

to access the connected USB

storage device.

Press the Navigation buttons toSelect a folder/

file you want.

Page 1/1

Movie List

Page 1/1

USB 1 XTICK

ꔂ Move � Play ꘃ Page Change ꘁ Mark

Drive1

M1 M2 M3 M4

Butterfly_...

01:34:33

ꔅ To Photo List ꔅ Change Numbers ꔅ Mark Mode ꕯ Exit

1 2

Page 1/1

Photo List

Page 1/1

P1 P2 P3 P4 P5 P6 P7 P8 P9

P10 P11 P12 P13 P14 P15

USB 1 XTICK

ꔂ Move � View ꘃ Page Change ꘁ Mark

ꔅ To Music List ꔅ Change Numbers ꔅ Mark Mode ꕯ Exit

Drive1

1 2

Music List

001. - B01 .mp3