Yamaha S90 Manual de usuario

Marca: Yamaha

Modelo: S90

Categoría: Pianos digitales

Tipo: Manual de usuario

S90 XS/S70 XS Editor Owner’s Manual 1

Contents

What is the S90 XS/S70 XS Editor? ........................................2

Studio Manager ........................................................................2

Studio Connections .................................................................2

About Open Plug-in Technology .............................................3

Data Structure of the S90 XS/S70 XS Editor ..........................4

Starting the S90 XS/S70 XS Editor..........................................5

An Example of S90 XS/S70 XS Editor in Use.........................6

S90 XS/S70 XS Editor Window ..............................................12

Basic Operations....................................................................34

Menu ........................................................................................36

Troubleshooting .....................................................................52

• Copying of the commercially available music sequence data and/or digital audio ﬁles is strictly prohibited except for

your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without

the written consent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot

be held responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat

different from the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their

respective companies.

• Click on the red-colored text to jump to the related item in this manual.

This owner’s manual assumes that you are already familiar with basic Windows/Macintosh operations. If you are not,

please refer to the owner’s manual which came with your Windows/Macintosh software before using the S90 XS/S70

XS Editor.

For information about hardware requirements, the interconnection of devices and the installation of the S90 XS/S70

XS Editor software, refer to the separate Installation Manual as well as the Owner’s Manual for the respective MIDI

device.

S90 XS/S70 XS Editor

Owner’s Manual

S90 XS/S70 XS Editor

Owner’s Manual

What is the S90 XS/S70 XS Editor?

S90 XS/S70 XS Editor Owner’s Manual

What is the S90 XS/S70 XS Editor?

S90 XS/S70 XS Editor is a convenient tool which lets you edit and save the various parameters of your S90

S90 XS/S70 XS Music Synthesizer. These include Voice and Mixing parameters (edited in the Voice or Multi

mode of the S90 XS/S70 XS) such as Volume, Pan, EG, and Cutoff and other settings. Thanks to its easy-to-

understand graphical interface, you can edit various parameters of the S90 XS/S70 XS right from your

computer—using the mouse to adjust the virtual knobs, sliders, and buttons and entering values from the

computer keyboard. Finally, all the changes you have made can be saved to your computer or transmitted to

the S90 XS/S70 XS instrument.

You can use this S90 XS/S70 XS Editor as a plug-in for the software below

• Studio Manager

•DAW application software compatible with Studio Connections

Studio Manager

Studio Manager V2 is a cross-platform application that enables you to start multiple Editors for controlling

Yamaha hardware products remotely, and to save multiple Editor settings. You can run Studio Manager as a

stand-alone application, or as a plug-in within DAW applications compatible with Studio Connections such

as Cubase 4 or Cubase AI 4.

For more information, refer to the Studio Manager PDF manual.

Studio Connections

Studio Connections is a joint project begun by Steinberg and Yamaha. Music

production systems now increasingly rely on both software and hardware, and there

is a pressing need for closer integration between the two. Studio Connections

provides a comprehensive and seamless music production environment—making the

use of hardware and software both easier and much more efﬁcient. The following

functions are available in Studio Connections.

Recall

With the Recall function, all settings in each Editor can be saved within Studio Manager, and then called up

again when needed. This enables you to recall all the settings of multiple devices from Studio Manager and

control the entire system easily, instantly and automatically.

Recall is especially convenient when used with a DAW application compatible with Studio Connections. This

lets you save the Editor data directly to the project ﬁle of the DAW letting you recall all necessary hardware

settings automatically by simply opening the project ﬁle.

When executing the Recall function in the Studio Manager, the parameter settings of either device (S90 XS/S70 XS or DAW

software on a computer) are synchronized with the other. You can determine which device (S90 XS/S70 XS or DAW software) is

regarded as the master of the parameter settings by setting the Auto Sync Setting (page 40).

About Open Plug-in Technology

S90 XS/S70 XS Editor Owner’s Manual

Audio Integration

Plug-in software such as software synthesizers and software samplers are exceptionally convenient in that

they let you easily change the various settings and parameters within the host application. However, control

over hardware is not so easy—with the need for various setups such as audio connections, driver settings

and MIDI port connections.

By using a Studio Connections-compatible DAW software, you can control the external hardware synthesizer

within the application, without the need to set up complex connections within a DAW software application—

just as easily and conveniently as you would with plug-in software. The Audio Integration function makes all

this possible. For details about Recall and Audio Integration, visit our web site at:

http://www

.studioconnections.org/

About Open Plug-in Technology

Open Plug-in Technology (OPT) is a software format that enables you to control MIDI devices from a music

DAW application software. For example, this allows you to start up and operate various parts of your music

system, such as voice editors of the synthesizer and mixing control editors—directly from an OPT-compatible

software, without having to use each separately. OPT also makes it unnecessary to set MIDI drivers for each

application, streamlining your music production system and making all operations more convenient and

seamless.

In addition to the original OPT, Open Plug-in Technology Version 2 (OPT 2), designed for Studio Connections,

is also available. The host application Studio Manager supports OPT 2.

About the OPT 2 Overview

OPT 2 is a plug-in format that enhances OPT Level 1 (Panels) and adds some convenient

functions for Studio Connections.

Plug-in software compatible with OPT 2 is indirectly

connected to the DAW application compatible with

Studio Connection, via the Studio Manager.

Editor

Host

Application

Editor

OPT2

Studio

Manager

Data Structure of the S90 XS/S70 XS Editor

S90 XS/S70 XS Editor Owner’s Manual

Data Structure of the S90 XS/S70 XS Editor

The S90 XS/S70 XS Editor lets you create the following data and save them as a single ﬁle (extension: .X2E).

• Global data (latest status of edited global parameters)

• Current data in the Voice mode (latest status of edited Voice)

• Current data in the Multi mode (consisting of Mixing setup, latest status of edited Voice and 16 Mixing Voices)

• User Voice data (consisting of four Normal Voice Banks and one Drum Voice Bank)

Current settings include the latest settings of the Common and Element parameters for the Voice last assigned to

each of Parts 1 – 16, as well as Mixing parameter settings such as Voice assignment, pan, volume and effect for

each Part. Among the Voice Banks, only the Mixing Voice Bank data belongs to the Current settings. The S90 XS/

S70 XS Editor lets you edit parameters (including Element parameters) of the Voice assigned to each Part and

save the latest edit status as a ﬁle without storing it as a User Voice or a Mixing Voice. This means that you can

easily recall the latest status of the previous edit simply by opening the ﬁle.

n The S90 XS/S70 XS Editor VST handles the Global data which includes some of the parameters shown on the “G” row in

the Mixer section and all the parameters in the Global Settings of the Parameter Category section (pages 21 and 24).

The diagram illustrated below indicates the structure of the data created via the S90 XS/S70 XS Editor, the

structure of the data stored in the internal memory of the S90 XS/S70 XS instrument and the relationship between

those two types of data.

*1 When the S90 XS/S70 XS instrument is connected to the computer properly with the ONLINE status, editing a parameter on the S90 XS/S70 XS Editor affects the same parameter on

the S90 XS/S70 XS itself, and vice versa.

*2 The Store Voice operation on the Editor will store the Voice data to the memory of the S90 XS/S70 XS instrument as well as the memory of the Editor.

*3 The Store Global operation and Store Mixing operation will store the data only to the memory of the S90 XS/S70 XS instrument.

As illustrated S90 XS/S70 XS Editor lets you save the current settings of all the parameters as well as the User

Voice data and Mixing Voice data consisting of the same Voice Banks as those of the S90 XS/S70 XS instrument to

a single ﬁle. Because the current settings of all the parameters are saved to the ﬁle even if they were not stored as

a User Voice or Mixing Voice, you can recall the last editing status simply by starting the S90 XS/S70 XS Editor.

S90 XS/S70 XS Editor (computer)

Global data

Current data in the Voice mode

Current data in the Multi mode

• Multi Common data

Part Voice data

(16 Voices)

Mixing Voice data

(16 Voices)

Store Voice

(page 47)

Store Voice

(page 47)

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Editor ﬁle

(Extension: .X2E)

Data sync

Global data

Current data in the Voice mode

Current data in the Multi mode

• Multi Common data

Global data

User Voice data

• Normal User 1 (128 Voices)

• Normal User 2 (128 Voices)

• Normal User 3 (128 Voices)

• Normal User 4 (128 Voices)

• Drum User (32 Voices)

Part Voice data

(16 Voices)

Multi data

• Multi Common data

Mixing Voice data

(16 Voices)

Store Voice

(page 47)

Store Voice

(page 47)

Store Voice

(page 47)

Store Mixing

(page 48)

Store Global

(page 47)

S90 XS/S70 XS instrument

Store Voice

(page 47)

Starting the S90 XS/S70 XS Editor

S90 XS/S70 XS Editor Owner’s Manual

Starting the S90 XS/S70 XS Editor

Install the driver USB-MIDI Driver, Studio Manager and S90 XS/S70 XS Editor by following the respective

Installation Guides, then install the host application such as Cubase if necessary. After making the required

connection and setting the MIDI IN/OUT parameter to “USB” in the Utility mode, follow the instructions below

to start the S90 XS/S70 XS Editor.

n For details about connection between the S90 XS/S70 XS and a computer, refer to the Owner’s Manual of the S90 XS/

S70 XS.

1. Start the Studio Manager.

Studio Manager can be started as a plug-in within a Studio Connections-compatible DAW software, or

can be started as a stand-alone application.

2. Set the MIDI Ports.

When starting Studio Manager as a stand-alone application:

Set the MIDI Ports by calling up the MIDI Ports window via [File]

→

[Setup]

→

[MIDI Settings]. When the

connection is done via a USB cable, enter the checkmarks to the boxes of Por ts 1 and 4 for the S90 XS/S70

XS in both the Input Ports and the Output Ports, as illustrated below.

n A MIDI Thru function is available on Studio Manager version 2.3.0 or later. This new feature lets you transmit

note on/off messages from the MIDI keyboard to the S90 XS/S70 XS instrument through the computer

(without starting the DAW software), letting you hear the sound of the edited Voice by playing the keyboard.

When starting Studio Manager as a plug-in:

Set the MIDI Ports on the DAW application. For details, refer to the manual of your DAW application.

When connecting the S90 XS/S70 XS to a computer via a USB cable, the MIDI Ports are automatically

set simply by starting Studio Manager from Cubase 4.5 or Cubase AI 4.5.

3. Start the S90 XS/S70 XS Editor from the window of the Studio Manager.

For details, refer to the Installation Guide and the PDF manual of the Studio Manager.

When using Studio Manager as a plug-in with the Audio Integration features of Studio Connections

(within a compatible DAW), you can start the S90 XS/S70 XS Editor just as any other software

synthesizer. For details, visit the following web site.

http://www.studioconnections.org/

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

An Example of S90 XS/S70 XS Editor in Use

There is no single way to use the many components in the S90 XS/S70 XS Editor. Your editing needs and

preferences may differ; however, the following example gives you a simple step-by-step guide in how to use

the S90 XS/S70 XS Editor. As an example, this section explains how to edit a Voice in the Voice mode, edit a

Mixing program in the Multi mode, then store the edited data to the memory of the S90 XS/S70 XS instrument

and save the ﬁnal results of your editing to a ﬁle.

n If the [Multi] indication (at the top left of the display) is on, perform the instructions below from step 1. If the [Voice]

indication is on, perform the instructions below from step 2.

1. Change the mode to the Voice mode by clicking the [Voice] indication (at the top left

of the display).

If the [ONLINE]/[OFFLINE] indication is set to [ONLINE] before changing the mode, the Auto Sync

window will be called up automatically when this step is executed. As step 2 is thus unnecessary, you

should proceed to step 3.

2. Click the [OFFLINE] to call up the Auto Sync window if the [ONLINE]/[OFFLINE]

indication is set to [OFFLINE].

3. On the Auto Sync window, set communication-related parameters such as Input Port,

Output Port and Device Number in the Data Port section, then set the direction of Data

Auto Synchronization (Global, Current and Voice) in the Auto Sync Setting section.

When you want to use the settings on the S90 XS/S70 XS itself as starting data for editing, set the boxes

of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the instrument to

the computer. To use the settings on the S90 XS/S70 XS Editor as starting data, set both Global, Current

and Voice to the opposite, so that the arrow indicates data ﬂow from the computer to the keyboard. For

details, see page 39.

CAUTION

Keep in mind that when you set Global, Current and User Voice to On, enable data sync from the computer to the S90 XS/

S70 XS (instrument), and then click the [Start] button at the bottom, this operation transmits these types of data currently on

the Editor to the S90 XS/S70 XS itself, automatically overwriting and erasing all the corresponding data already existing on

memory of the S90 XS/S70 XS instrument. When you want to use the settings on the S90 XS/S70 XS itself as starting data

for editing, set the boxes of Global, Current and Voice in the Auto Sync Setting to on so that the data ﬂows from the

instrument to the computer.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

CAUTION

Regarding the data transfer for synchronization, the setting here takes precedence over that speciﬁed in Studio Manager.

Make sure to set the desired data transfer direction, regardless of the setting on the Studio Manager, in order to avoid data

loss.

4. From the Auto Sync window, click [Start] at the bottom.

The data synchronization will be started if the Port settings are correct. As soon as data synchronization

is completed, the Auto Sync window is closed, then the OFFLINE indication is changed to ONLINE

indication automatically. In this ONLINE status, editing a parameter on the S90 XS/S70 XS Editor affects

the same parameter on the S90 XS/S70 XS itself, and vice versa.

5. Edit the Voice in the Voice mode.

5-1 On the “V” row of the Voice section, click the Bank name or Voice name to call up the

VOICE LIBRARY window.

5-2 From the list in the VOICE LIBRARY, select the desired Voice to assign it temporarily to

the current Part.

You can conﬁrm the sound of the selected Voice by clicking any note on the virtual keyboard or the S90

XS/S70 XS keyboard.

5-3 Click the Voice name or [OK] at bottom right of the window to close the VOICE LIBRARY

window.

You can cancel the Voice selection by clicking the Close (X) button or [Cancel] button at bottom right of

the window. By executing this operation, the Voice selection is reset to the original status and the VOICE

LIBRARY window closes.

CAUTION

When a different Voice has been selected, your edits of the previously selected Voice will be lost. If you want to store the

edits, make sure to store the Voice by using the Store window (page 47) before changing the Voice.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

5-4 Edit the Voice parameters as desired.

Edit the parameters (EQ, chorus, reverb, etc.) in the “V” row by clicking them.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

S90 XS/S70 XS keyboard.

To make detailed settings of the selected Voice, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

6. Store the edited settings as a User Voice, as necessary.

6-1 Click [Store Voice] under [Edit] in the menu bar to open the Store window (page 47).

6-2 Select a Voice Bank from the following list:

• Normal User 1

• Normal User 2

• Normal User 3

• Normal User 4

• Drum User

n Normal User 1 – 4 are shown in the Store window when editing the Normal Voice while Drum User is shown in

the Store window when editing the Drum Voice.

6-3 Open the selected Bank, select the desired number as destination, then enter the name

of the Voice in the box at the top of this window.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.

Performing this operation will store the Voice data to the User Voice Bank in the S90 XS/S70 XS

instrument as well as that within the Editor.

CAUTION

When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument) will be

overwritten. Select the destination Voice number carefully to prevent important data from being erased accidentally.

n You can store the settings of the parameters in the “G” row by clicking [Store Global] under [Edit] in the menu

bar.

7. Edit the Mixing parameters in the Multi mode.

7-1 Change the mode to the Multi mode by clicking [Multi] of the [Voice]/[Multi] indication.

The Auto Sync window appears automatically.

7-2 From the Auto Sync window, click [Start] at the bottom.

Data synchronization will be started if the Port settings are correct. As soon as data synchronization is

completed, the Auto Sync window is closed.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

7-3 On the “G” row of the Global/Multi section, click the Multi name or Voice name to call up

the MULTI LIBRARY window.

The MULTI LIBRARY lists the Multi programs which is stored in the S90 XS/S70 XS instrument when the

S90 XS/S70 XS Editor is in ONLINE status. You can call up the Multi setup simply by selecting one of

these listed template programs.

n The MULTI LIBRARY is not available when the S90 XS/S70 XS Editor is in “OFFLINE” status.

7-4 From the list in the MULTI LIBRARY, select the desired Multi program to be edited.

All the Multi parameters such as the Voice assignment to Part 1 – 16 are set automatically only via this

operation.

7-5 Edit the parameters of the Mixing and Voice assigned to each Part.

If you want to change the parameter values from the original ones of the selected Multi, click (drag and

drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/Multi section

and “1” – “16” in the Part section.

To conﬁrm how the parameter edit affects the Voice sound, click any note on the virtual keyboard or the

S90 XS/S70 XS keyboard.

To make detailed settings of the selected Multi, click the arrow button at the top of the right panel

next to the main window to call up the Detailed Parameter section.

n The S90 XS/S70 XS Editor lets you edit the Voice parameters in the Multi mode as well as Voice mode. In the

Voice mode, you can edit only the selected Voice. In the Multi mode, on the other hand, you can edit the

parameters of the Voice assigned to each Part as well as the Mixing parameters. The edited Voice can be

stored to the same Voice Bank as a User Voice regardless of the mode used for editing.

An Example of S90 XS/S70 XS Editor in Use

S90 XS/S70 XS Editor Owner’s Manual

8. Store the edited Voice or a Multi, as necessary.

8-1 Select the [Store Mixing] under the [Edit] menu to store the edited Multi.

n You can also store the edited Multi with the Store operation on the S90 XS/S70 XS instrument. For details,

refer to the Owner's Manual of the S90 XS/S70 XS.

8-2 Select the Part to which the desired Voice is assigned, select [Store Voice] under [Edit] in

the menu bar to call up the Store window (page 47) then store the Voice via the same

operations as in steps 6-1, 6-2, 6-3 and 6-4.

9. Select [Save] or [Save As] under [File] on the menu bar to save the edited data as a ﬁle

(extension: *.X2E).

All the settings you made and the Voice data you stored to the User Banks will be saved as a single ﬁle

(extension: X2E). When you open this ﬁle next time to call up the Auto Sync window, click [Start] to

synchronize the status of the parameter settings between the S90 XS/S70 XS Editor and the S90 XS/S70

XS instrument.

• When starting the S90 XS/S70 XS Editor from Studio Manager, you can save the S90 XS/S70 XS Editor

data into a Session ﬁle of Studio Manager.

• When using DAW (digital audio workstation) software compatible with Studio Connections and the

Studio Manager together, the S90 XS/S70 XS Editor data can be saved into a project ﬁle of the DAW.

S90 XS/S70 XS Editor Window: Overall section

S90 XS/S70 XS Editor Owner’s Manual

S90 XS/S70 XS Editor Window

Overall section

1 File, Edit, Bulk, Help

Refer to page 36.

2 Voice/Multi mode

Determines the mode of the S90 XS/S70 XS, Voice or Multi. As soon as “Voice” or “Multi” is selected

here, the mode of the S90 XS/S70 XS instrument changes accordingly and the Auto Sync window

(page 51) opens. After setting parameters as necessary on this window, click [Start] to execute data

synchronization between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument.

3 ONLINE/OFFLINE

Clicking this switches the status of the Editor between “ONLINE” and “OFFLINE.” When “ONLINE” is

indicated, the edited status is completely synchronized between the S90 XS/S70 XS Editor and the S90

XS/S70 XS instrument, meaning that any parameter edit you make on the S90 XS/S70 XS Editor is

reﬂected in the same parameter on the S90 XS/S70 XS instrument and vice versa. When OFFLINE is

selected, editing on the S90 XS/S70 XS Editor will not affect the S90 XS/S70 XS instrument and vice

versa even if the S90 XS/S70 XS instrument is connected to a computer.

Note that the indication here is automatically changed according to the status of communication

between the S90 XS/S70 XS Editor and the S90 XS/S70 XS instrument. For example, the ONLINE status

changes automatically to OFFLINE when the cable is disconnected accidentally.

Indicates that the current status is set to ONLINE. Clicking this calls up OFFLINE (2) described below.

Keep in mind that the ONLINE indication cannot be enabled when the MIDI Port is not set properly or the

S90 XS/S70 XS instrument is not properly connected to a computer.

This OFFLINE indication shows that the MIDI Port is set properly and the S90 XS/S70 XS is properly

connected to a computer. Clicking this calls up the Auto Sync window. From the Auto Sync window, you

can synchronize the settings between the S90 XS/S70 XS Editor and the S90 XS/S70 XS by clicking the

[Start] button. As soon as data synchronization is completed, the Auto Sync window is closed and the

status of the Editor changes from OFFLINE to ONLINE.

n When the Global, Current and Voice settings are set to “Off” and Auto Start is set to “On” in the Auto Sync

window, clicking here changes the Editor status from OFFLINE to ONLINE without opening the Auto Sync

window.

This OFFLINE indication shows that the MIDI Port is not set properly or the S90 XS/S70 XS instrument is not

connected to a computer properly. Clicking this calls up the Auto Sync window. After making sure to

connect the S90 XS/S70 XS instrument to a computer, set the MIDI Port properly then click the [Start]

button in the Auto Sync window to execute data synchronization between the S90 XS/S70 XS Editor and

the S90 XS/S70 XS instrument. As soon as data synchronization is completed, the Auto Sync window is

closed and the status of the Editor is changed from OFFLINE to ONLINE.

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

Mixer section (when the Voice/Multi is set to “Voice”)

1 Global

This strip lets you edit the main parameters in the Voice mode, such as effect-related ones. Clicking “G”

turns this section on as illustrated below.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a ﬁle. This indication is the same as the green [F] indicator

(page 29).

Ins.FX (Insertion Effect)

Turns the Insertion Effect on or off.

Chorus

Turns the Chorus on or off and selects the Chorus type.

Reverb

Turns the Chorus on or off and selects the Reverb type.

MFX (Master Effect)

Turns the Master Effect on or off and selects the Master Effect type.

MEQ, Lo, Lo-M, Mid, Hi-M, Hi (Master EQ)

Turns the Master EQ on or off and edits the parameters.

Volume

Adjust the entire volume.

2 [Voice]/[AD Part] tab

Selects the Parts to be edited from [Voice] and [AD Part]. The illustration below indicates that the [Voice]

tab is active.

Before editing

After editing

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

3 Voice

When the [Voice] is selected:

Edits the Voice parameters. Clicking the “V” row turns this section on as illustrated below.

n When editing any of the Voice parameters described below, a small square appears at the top right of the “V”

box until you save the edited data as a ﬁle or you store the edited data as a Voice. This indication is the same

as the blue [V] indicator (page 29).

n The MIDI monitor mark is at the left side of the “V” mark. A small red LED lights when MIDI messages are

received.

Category, Bank No., Voice Name

Indicates the Category Bank and name of the Voice. When clicking here, the VOICE LIBRARY window

appears at the right half section, letting you select a different Voice for editing.

VOICE LIBRARY

1 Close button

Click this to close this window without applying the changes to the S90 XS/S70 XS Editor.

2 [Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices listed here are divided into Category

folders or Bank folders.

Before editing

After editing

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

3 [+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

4 Folder (Category or Bank)

Click each folder to open or close it.

5 Voices

Indicates the Voices included in the folder. You can select the Voice temporarily by clicking it. When

double-clicking a Voice, the Voice is actually selected and this window closes. You can also copy the

Preset Voice(s) and User Voice(s) from the original location to any location in the User Bank by

dragging-and-dropping the Voice(s). In the User Bank, you can rearrange the Voices by dragging-and-

dropping the Voice(s) to a new location.

A checkbox exists at left of each Voice. If you enter checkmarks to the checkboxes of your most-used

or favorite Voice, you can call up a list of these Voices on the VOICE LIBRARY by setting the [Favorites]

checkbox to on.

n Selecting, copying, pasting or dragging-and-dropping multiple Voices is done in the same way as

normal on your computer OS.

n By right-clicking this section and selecting a menu, you can use the following functions.

• Opening/closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders.

• Copying/pasting

• Changing the Voice name

• Deleting all the checkmarks of the Favorites checkboxes at left of the Voices

6 Search Box

You can search for your desired Voice by inputting a keyword here.

7 [Favorites] checkbox

By entering the checkmark to this checkbox, you can call up a list of your favorite Voices on the VOICE

LIBRARY. You can select your favorite or most-used Voices for this list by entering checkmarks to the

appropriate checkboxes at the left of each Voice.

8 [OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the Voice selection.

9 [Refresh] button

When the VOICE LIBRARY is shown in the Editor and you store the Voice(s) on the S90 XS/S70 XS

itself, the name(s) of the Voice(s) in the VOICE LIBRARY may be different from the Voice name(s) on the

S90 XS/S70 XS. If this happens, click this button to update the Voice names of the VOICE LIBRARY.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for the current Voice.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the current Voice by using

the graphic knobs.

Volume

Adjusts the volume of the current Voice.

ARP (Arpeggio)

Turns Arpeggio playback on or off for the current Voice.

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

When the [AD Part] is selected:

This section lets you edit parameters for the A/D Part in the Voice mode. Clicking “AD” row turns this

section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part in the Voice

mode by using the graphic knobs.

Volume

Adjusts the Volume for the A/D Part.

Output Select

Determines the speciﬁc output(s) for the A/D Part.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

asL ASSIGNABLE OUTPUT L Mono

asR ASSIGNABLE OUTPUT R Mono

vocoder Insertion Effect for Part 1

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Mixer section (when the Voice/Multi is set to “Multi”)

1 Global

This strip lets you edit the main parameters in the Multi mode, such as effect-related ones. Clicking “G”

turns this section on as illustrated below.

n When editing any of the Global parameters described below, a small square appears at the top right of the

“G” box until you save the edited data as a ﬁle. This indication is the same as the green [F] indicator

(page 29).

Before editing

After editing

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Multi program

At the right of the “G” indication, the name of the Multi program which includes the parameter settings for

all the Parts 1 – 16 is shown when the [Part 1-16] tab (

page 19

) is selected. Clicking the Multi program

name will call up the MULTI LIBRARY which lets you select the desired Multi program.

MULTI LIBRARY

1 Close button

Click this to close this window without applying the changes to the S90 XS/S70 XS Editor.

2 [+]/[–] buttons

Click the [+] button to open all the folders so that all Multi programs appear in all folders. Click the [–]

button to close all folders.

3 Multi programs

Indicates the Multi programs included in the folder. When pressing the [OK] button after clicking or

double-clicking on a Multi, the Multi is actually selected and this window closes.

n By right-clicking this section and selecting a menu, you can use the following function.

• Opening/closing all the folders

4 Search Box

You can search for your desired Multi by inputting a keyword here.

5 [OK]/[Cancel] buttons

Click the [OK] button to apply the settings and close this window. Click the [Cancel] button to quit

without applying the settings.

6 [Refresh] button

When the MULTI LIBRARY is shown in the Editor and you store the Multi(s) on the S90 XS/S70 XS itself,

the name(s) of the Multi(s) in the MULTI LIBRARY may be different from the Multi name(s) on the

S90 XS/S70 XS. If this happens, click this button to update the Multi names of the MULTI LIBRARY.

Ins.FX (Insertion Effect)

Switches the Insertion Effect on or off.

Chorus

Turns the Chorus on or off and selects the Chorus type.

Reverb

Turns the Chorus on or off and selects the Reverb type.

MFX (Master Effect)

Turns the Master Effect on or off and selects the Master Effect type.

MEQ, Lo, Lo-M, Mid, Hi-M, Hi (Part EQ)

Turns the Master EQ on or off and edits the parameters.

Volume

Adjusts the entire volume.

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

2 [Part 1-16]/[AD Part] tab

Selects the Parts to be edited from [Part 1-16] and [AD Part]. The illustration below indicates that the

[Part 1-16] tab is selected.

3 Part

When [Part 1-16] is selected:

This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part

on. In the example illustration below, Part 1 is active.

n When editing any of the Voice parameters such as Element parameters for each Part, a small square

appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice

or you save the edited data as a ﬁle. This indication is the same as the blue [V] indicator (page 29).

Part (Part number)

Indicates the Part number. Clicking here turns the corresponding Part on.

n In some situations, selecting a Part number on the Editor may not change a Part number on the S90 XS/S70

XS and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and you

want to match the Part number of the S90 XS/S70 XS with the one in the Editor, change the Part number via

the panel controls of the S90 XS/S70 XS.

Mute/Solo

1 Mute

Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts

simultaneously.

2 Solo

Selects the Solo Part. Only one Part can be soloed at a time.

Category, Bank, No., and Voice Name

Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the

VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the

current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to

page 14.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for each Part.

Ins.FX (Insertion Effect Switch)

Switches the Insertion Effect on or off.

n Insertion Effects can be applied up to eight Parts.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the

graphic knobs.

Volume

Adjusts the Volume for each Part.

S90 XS/S70 XS Editor Window: Mixer section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Rcv Channel (Receive Channel)

Determines the MIDI Receive Channel for each Part.

Output Select

Determines the speciﬁc output(s) for the individual Part. The following settings are available.

* When a Normal Voice is assigned to the edited Part, this value is indicated as “L&R (dr)” and the sound will be

output via the OUTPUT L and R jacks in stereo. When a Drum Voice is assigned to the edited Part, this value is

indicated as “drum” and the sound will be output via the jacks set in the Drum Key Edit as the Output Select

parameter on the S90 XS/S70 XS Editor.

ARP (Arpeggio)

Turns Arpeggio playback on or off for each Part.

n Up to four Parts can play back the Arpeggio simultaneously.

When [AD Part] is selected:

This section lets you edit parameters for the A/D Part in the Multi mode. Clicking “AD” row turns this

section on as illustrated below.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level and stereo Pan position for the A/D Part by using the

knob icons.

Volume

Adjusts the Volume for the A/D Part.

Output Select

Determines the speciﬁc output(s) for the A/D Part. The available settings are the same as those of the

A/D Part in the Voice mode. Refer to page 16.

LCD Output jacks Stereo/Mono

L&R OUTPUT L and R Stereo

asL&R ASSIGNABLE OUTPUT L and R Stereo

drum See below* See below*

S90 XS/S70 XS Editor Window: Parameter Category section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

Parameter Category section (when the Voice/Multi is set to “Voice”)

You can edit detailed parameters for the current Part by clicking the button (located near the top right of

the window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

S90 XS/S70 XS Editor Window: Parameter Category section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

The indicated categories in the Parameter Category section differ depending on the selected row: G, V, or

AD Part, as illustrated below. Clicking each of Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “V”

indication shown below appears by clicking the “V” row appearing only when the [Voice] tab is selected at

the bottom of the Mixer section. The “AD” indication shown below appears by clicking the “AD” row

appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.

1 Open/Close button

This button opens/closes the Detailed Parameter section. When only the left arrow is indicated in white,

the Detailed Parameter section is hidden and you can call it up by clicking here. When only the right

arrow is indicated in white, the Detailed Parameter section is shown on the display, allowing you to edit

the displayed parameters. The Detailed Parameter section can be closed by clicking this button. You

can also conveniently open and close the Detailed Parameter window from your computer keyboard.

Hold down the <Ctrl> key (Command key for Mac) and simultaneously press the left arrow (←) key to

open the window, or hold <Ctrl> key (Command key for Mac) and press the right arrow (→) key to close

it.

2 Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

3 Voice Common

This is shown when the “V” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Voice Common parameters in the Detailed Parameter section.

1 1

“G” “V” “AD”

S90 XS/S70 XS Editor Window: Parameter Category section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

4 Element or Drum Key

This is shown when the “V” row is selected in the Mixer section. When a Normal Voice is selected

(“Element” is shown in the Parameter Category section) and you select an Element number (from 1 –

16), then clicking each of the parameter categories calls up the corresponding Element parameters in

the Detailed Parameter section. When a Drum Voice is selected (“Drum Key” is shown in the Parameter

Category section) and you select a key number (from C0 – C6), then clicking each of the parameter

categories calls up the corresponding Drum Key parameters in the Detailed Parameter section.

1 Checkboxes for Elements (available when the Normal Voice is selected)

Turns each Element on or off.

2 [1] – [8], [All] buttons (available when the Normal Voice is selected)

Selects the Element to be edited. When [All] is selected, the Element Quick Setting window appears in the

Detailed Parameter section. This window conveniently lets you edit frequently-used Element parameters of

all Elements in a single window.

3 Element Parameter categories (available when the Normal Voice is selected)

Indicates the categories of Element parameters. Clicking each of the categories calls up the

corresponding Element parameters in the Detailed Parameter section.

4 Checkbox for the Drum Key (available when the Drum Voice is selected)

Turns the current Drum Key on or off.

5 Drum Key (available when the Drum Voice is selected)

Indicates the current Drum Key to be edited. You can select the Drum Key to be edited by clicking either of

the triangular buttons below the key indication.

6 Drum Key Parameter categories (available when the Drum Voice is selected)

Indicates the categories of Drum Key parameters. Clicking each of categories calls up the corresponding

Drum Key parameters in the Detailed Parameter section.

5 AD

This is shown when the AD Part is selected in the Mixer section. The Detailed Parameter section shows

the Effect-related parameters.

6 i (Information)

Indicates information about the parameter at the cursor arrow position. To view the information for a

desired parameter, mouse-over the knob, slider or setting for that parameter. You can switch this

Information feature on or off by clicking the “

i” box.

2 53 6

When the Normal Voice is

selected:

When the Drum Voice is

selected:

S90 XS/S70 XS Editor Window: Parameter Category section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Parameter Category section (when the Voice/Multi is set to “Multi”)

You can edit detailed parameters for the current Part by clicking the button (located near the top right of the

window, just below the model name) to call up the Detailed Parameter section. Calling up the Detailed

Parameter section moves the Parameter Category Section rightward as shown below.

Parameter Category section

Parameter Category section Detailed Parameter section

S90 XS/S70 XS Editor Window: Parameter Category section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

The indicated categories in the Parameter Category section differ depending on the selected Part type: G,

Part 1 – 16, or AD Part. Clicking each of the Categories calls up the corresponding parameters in the

Detailed Parameter section. The “G” indication shown below appears when clicking the “G” row. The “Part 1

– 16” indication shown below appears by clicking any place on the Part row appearing only when the [Part 1-

16] tab is selected at the bottom of the Mixer section. The “AD” indication shown below appears by clicking

the “AD” row appearing only when the [AD Part] tab is selected at the bottom of the Mixer section.

1 Open/Close button

Same as in the Voice mode (page 22).

2 Global Settings

This is shown when the “G” row is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Global parameters in the Detailed Parameter section.

3 Part Common

This is shown when one of Parts 1 – 16 is selected in the Mixer section. Clicking each of the parameter

categories calls up the corresponding Common parameters of the Voice/Part in the Detailed Parameter

section.

4 Element or Drum Key

This is shown when one of Parts 1 – 16 is selected in the Mixer section. When a Normal Voice is

assigned to the current Part (“Element” is shown in the Parameter Category section) and you select an

Element number (from 1 – 16), then clicking each of the parameter categories calls up the

corresponding Element parameters in the Detailed Parameter section. When a Drum Voice is assigned

to the current Part (“Drum Key” is shown in the Parameter Category section) and you select a key

number (from C0 – C6), then clicking each of the parameter categories calls up the corresponding Drum

Key parameters in the Detailed Parameter section.

For details, see the Voice mode (page 23).

5 AD

Same as in the Voice mode (page 23).

6 i (Information)

Same as in the Voice mode (page 23).

1 1

“G” Part 1 – 16 “AD”

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

Detailed Parameter section (when the Voice/Multi is set to “Voice”)

This section indicates the detailed parameters of the selected category for the current Voice or Global

settings. This section introduces what parameters belong to each of the Parameter Categories. For details

about each parameter, refer to the Owner’s Manual of the S90 XS/S70 XS.

Three Indicators showing the Editing Status

One or more of the following three indicators are shown at the right top of the window when you edit a

parameter.

n These indicators, “V,” “G” and “F” are linked with the small squares at the top right of the “V” box and “G” box

in the Mixer section. The “V” and “G” indicators disappear if you execute the Voice Store, Mixing Store and

Global Store operation, respectively. The “F” indicator and the small squares at the top right of the “G” box in

the Mixer section disappear only if you execute the File Save operation. All the indicators and the small

squares disappear if you execute the File Save operation.

Indicates that the Voice edits are not stored yet as a User Voice. This indicator disappears when you

execute Voice Store (page 47).

Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global

Store (page 47).

Indicates that the parameter edits are not saved yet as a ﬁle.

V, G, F

indicators

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

Global Settings

This Parameter category which is called up by selecting the “G” row in the Mixer section consists of the

following sub categories.

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the Master Effect/EQ parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Master FX” or “Master EQ” on the Utility Voice Select display.

Controller Assign

Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Controller” on the Utility Select display.

Micro Tuning

Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Micro Tune” on the Utility Select display.

Voice Common

This Parameter Category is called up by selecting the “V” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to all the Elements or Drum Keys commonly.

The following sub categories are included.

General

Clicking this in the Parameter Category section calls up the parameters such as Voice name and pitch-

related parameters in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these

parameters are the same as those called up by selecting “Name,” “Play Mode,” “Filter/EG” and “3 Band

EQ” on the Voice Edit Select display.

ARP (Arpeggio)

Clicking this in the Parameter Category section calls up the Arpeggio-related parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Arpeggio” on the Voice Edit Select display.

Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which

lets you use the search function for the selecting Arpeggio Types, as with the VOICE LIBRARY window

(page 14).

Control Set

Clicking this in the Parameter Category section calls up the Controller Set parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Controller” on the Voice Edit Select display.

LFO (Low Frequency Oscillator)

Clicking this in the Parameter Category section calls up the LFO-related parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “LFO” on the Voice Edit Select window. This Parameter Category is not available for Drum

display.

Effect

Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Effect” on the Voice Edit Select display.

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Voice”)

S90 XS/S70 XS Editor Owner’s Manual

Element or Drum Key

This Parameter Category is called up by selecting the “V” row in the Mixer section. The “Element” is shown

when the Normal Voice is selected while the “Drum Key” is shown when the Drum Voice is selected. The

parameters belonging to this category lets you make the settings applied to each of the Elements or Drum

Keys individually. The following sub categories are included.

n For information about the checkboxes at left of each Element number 1 – 8 and “All,” refer to page 23. For information

about the Drum Key (note name) and checkbox, refer to page 23.

n The Element parameters of the Normal Voice and Drum Key parameters of the Drum Voice can be edited only on the

Editor. Note that these cannot be edited on the S90 XS/S70 XS instrument.

Oscillator/Pitch

Clicking this in the Parameter Category section calls up the parameters related to the Oscillator and

Pitch in the Detailed Parameter section.

Filter

Clicking this in the Parameter Category section calls up the Filter-related parameters in the Detailed

Parameter section.

Amplitude

Clicking this in the Parameter Category section calls up the Amplitude-related parameters in the

Detailed Parameter section.

LFO/EQ (Low Frequency Oscillator/Equalizer)

Clicking this in the Parameter Category section calls up the parameters related to the LFO and EQ in the

Detailed Parameter section.

This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to the AD Part in the Voice mode. The following

sub category is included.

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to

the A/D Part of the Voice mode in the Detailed Parameter section.

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Detailed Parameter section (when the Voice/Multi is set to “Multi”)

This section indicates the detailed parameters of the selected category for the current Part and the Voice

assigned to the current Part, or the Global settings. This section introduces what parameters belong to each

of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the S90 XS/

S70 XS.

Four Indicators showing the Editing Status

One or more of the following four indicators are shown at the right top of the window when you edit a

parameter.

n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of the “1” – “16” boxes and “G”

box in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and

Global Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer

section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you

execute the File Save operation.

Global Settings

This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following

sub categories.

Controller Assign

Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Controller” on the Utility Select display.

Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator

disappears when you execute Voice Store (page 47).

Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing

Store (page 48).

Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global

Store (page 47).

Indicates that the parameter edits are not saved yet as a ﬁle.

V, M, G, F

indicators

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Micro Tuning

Clicking this in the Parameter Category section calls up the Micro Tuning parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Micro Tune” on the Utility Select display.

Multi Common

This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following

sub categories.

Effect

Clicking this in the Parameter Category section calls up the Effect-related parameters in the Detailed

Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up

by selecting “Effect” on the Multi Common Edit Select display then selecting “Reverb” and “Chorus.”

Master FX/EQ (Master Effect/EQ)

Clicking this in the Parameter Category section calls up the parameters related to the Master Effect and

EQ in the Detailed Parameter section. On the S90 XS/S70 XS instrument, the Master Effect parameters

are the same as those called up by selecting “Effect” on the Multi Common Edit Select display then

selecting “Master,” while the Master EQ parameters are the same as those called up by selecting

“Master EQ” on the Multi Common Edit Select display.

Multi Name

Clicking this in the Parameter Category section calls up the box which lets you edit the Multi name in the

Detailed Parameter section. On the S90 XS/S70 XS instrument, this is the same as the display called up

by selecting “Name” on the Multi Common Edit Select display.

Part Common

This Parameter category which is called up by selecting any of the “1” – “16” rows in the Mixer section

consists of the following sub categories.

General

Clicking this calls up the GENERAL window in the Parameter Category section. This window lets you edit

the Voice Common parameters such as naming and the Mixing Part parameters such as Pitch,

Portamento, Note/Velocity Limit and Part EQ. In the Part Common General section, both the Mixing Part

parameters (the “M” indicator appears at the top right during editing) and Voice Common parameters

(the “V” indicator appears at the top right during editing) can be edited. To distinguish between them, a

small dot is shown at the immediate left of the parameters.

ARP (Arpeggio)

Clicking this in the Parameter Category section calls up the parameters related to the Arpeggio

assigned to the current Part in the Detailed Parameter section. On the S90 XS/S70 XS instrument, these

parameters are the same as those called up by selecting “Arpeggio” on the Multi Common Edit Select

display or Multi Edit Select display.

Clicking the row of the Bank/Category/Sub/Number/Name will call up the ARP LIBRARY window which

lets you use the search function for the selecting Types, as with the VOICE LIBRARY window (page 14).

RCV/Control Set (Receive/Control Set)

Clicking this calls up the RCV/Control Set window in the Parameter Category section. This window lets

you edit the Receive Switch parameters for the current Part and the Controller Set Assign parameters for

the current Part and the Voice. On the S90 XS/S70 XS instrument, these parameters are the same as

those called up by selecting “RcvSw” on the Multi Edit Select display.

LFO (Low Frequency Oscillator)

Clicking this in the Parameter Category section calls up the LFO-related parameters of the Voice

assigned to the current Part in the Detailed Parameter section. This Parameter Category is not available

if the Drum Voice is assigned to the current Part.

S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)

S90 XS/S70 XS Editor Owner’s Manual

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Insertion Effect for

the current Part and System Effect applied to all the Parts in the Detailed Parameter section.

Element or Drum Key

This Parameter Category is called up by selecting any of the “1” – “16” rows in the Mixer section. The

“Element” indication appears when the Normal Voice is assigned to the current Part while the “Drum Key” is

shown when the Drum Voice is assigned. The parameters belonging to this category lets you make the

settings applied to each of the Elements or Drum Keys individually. For details, see the Voice mode section.

This Parameter Category is called up by selecting the “AD” row in the Mixer section. The parameters

belonging to this category lets you make the settings applied to the A/D Part in the Multi mode. The following

sub category is included.

Effect

Clicking this in the Parameter Category section calls up the parameters related to the Effect applied to

the A/D Part of the Multi mode in the Detailed Parameter section.

S90 XS/S70 XS Editor Window: Bottom section

S90 XS/S70 XS Editor Owner’s Manual

Bottom section

1 Controller Set status

This section indicates which controller of the S90 XS/S70 XS (either built-in or connected) is used as the

Control Source of the Controller Set edited in the RCV/Control Set window.

1 Part

Indicates the current Part. When [Voice]/[Multi] is set to “Voice” (Voice mode is enabled), in the Voice

mode, this indication is ﬁxed to “1.” When the [Voice]/[Multi] is set to “Multi” (Multi mode is enabled), in the

Multi mode, this indication is determined by selecting the Part in the Mixer section.

2 Control Source

Indicates the six controllers as source of the Controller Set. The abbreviations for the Controllers are as

follows:

3 On/Off status

When a lamp is turned on, a certain function (Destination) is assigned to the corresponding Source

(controller). When a lamp is turned off, no function (Destination) is assigned to the corresponding Source

(controller).

2 Quick Setup

From this section, you can instantly call up appropriate settings related to the MIDI parameters.

n The settings of the S90 XS/S70 XS instrument made via the operation here cannot be saved as an Editor ﬁle.

You can select a template from 1 – 3. On the S90 XS/S70 XS instrument, this section is the same as the

Quick Setup parameter on the Utility Quick Set display.

n The parameters set via the Quick Setup can be edited on the Hardware Utility window (page 43).

Indication Control Source Indication Control Source

PB Pitch Bend Wheel BC Breath Controller

MW Modulation Wheel AS1 ASSIGN 1 knob

AT After Touch (keyboard) AS2 ASSIGN 2 knob

FC Foot Controller FC2 Foot Controller 2

FS Foot Switch AF1 ASSIGNABLE FUNCTION 1 button

RB Ribbon Controller AF2 ASSIGNABLE FUNCTION 2 button

S90 XS/S70 XS Editor Window: Bottom section

S90 XS/S70 XS Editor Owner’s Manual

3 Knobs

This section lets you adjust various parameters assigned to the Knobs on the front panel of the S90 XS/

S70 XS instrument.

1 [TONE]/[EG]/[EQ]/[Effect]/[MIC]

Same as the Knob Function buttons on the panel of the S90 XS/S70 XS.

2 Knobs 1 – 4

Same as the four knobs on the panel of the S90 XS/S70 XS.

4 ARP (Arpeggio)

Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5).

5 MIDI monitor

Turns the MIDI monitor function on or off. When this MIDI jack icon is turned on, the MIDI

messages transmitted from the S90 XS/S70 XS through the MIDI port set via the Data Port

parameter on the Editor Setup window (page 39) will be shown on the virtual keyboard at the

bottom of the Editor window.

6 [A.Func] (Assignable Function) button

This button is related to “All AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control

parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the

Owner’s Manual of the S90 XS/S70 XS.

7 Keyboard

Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or

drag will be transmitted to the external device via the MIDI port speciﬁed in the Editor Setup window

(page 39) as the MIDI OUT parameter.

n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 41)

in the Setup window.

n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking on the

virtual keyboard. From the menu called up by right-clicking, selecting “Initialize key” will initialize all the

parameter settings except for the waveform assignment of the currently selected drum key, while selecting

“Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment.

Basic Operations

S90 XS/S70 XS Editor Owner’s Manual

Basic Operations

This section covers basic operations of the S90 XS/S70 XS Editor.

Naming a Voice

You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window,

GENERAL window in the Part Common General, and the Store window.

From the VOICE LIBRARY window (page 14), select a User Voice or Mixing Voice then click the selected

Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the

cursor to another parameter ﬁnalizes the edited name while pressing the <Esc> key aborts it.

From the GENERAL window (below) and Store window (page 47), locate the cursor in the text box of “Voice

Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the

<Enter> key or locating the cursor to another parameter ﬁnalizes the edited name.

Searching for a Voice/Arpeggio Type

You can search for the desired Voice, Multi and Arpeggio Type on the VOICE LIBRARY window (page 14),

MULTI LIBRARY window (page 18) and ARP LIBRARY window just by inputting a keyword in the text box at

the bottom of these windows respectively. Likewise, the Search function is available on the Import window

(page 37).

Inputting a numerical value

When double clicking a value box such as that shown above, the value box can be edited and you can input

a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the

cursor to another parameter ﬁnalizes the value while pressing the <Esc> key aborts it. You can edit the value

also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box.

In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value

box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and

click on the value box.

n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the

numeric keys.

Basic Operations

S90 XS/S70 XS Editor Owner’s Manual

Selecting a value

Clicking inside the value box like such as that shown above calls up the list box, from which you can select

the desired value. You can also select the value also by clicking the arrow at right end of this box.

Using a knob

Dragging or clicking the knob such as that shown above changes the value of the corresponding parameter.

After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you

want to make ﬁne adjustments to the value, drag the mouse while holding the <Shift> key.

The speciﬁc operation of the knob is determined by the settings of the Knob Guide parameter and Knob

Mouse Control parameter in the Setup window (page 39). In Windows, to reset the value to its default,

simultaneously hold down the <Ctrl> key and click on the knob. On the Macintosh, to reset the value to its

default, simultaneously hold down the Command key and click on the knob.

Using a slider

Dragging or clicking the slider such as that shown above changes the value of the corresponding parameter.

After clicking this, you can edit the value by using the cursor key or <Page Up>/<Page Down> key. If you

want to make ﬁne adjustments to the value, drag the mouse while holding the <Shift> key.

The speciﬁc operation of the slider is determined by the setting of the Slider Mouse Control parameter in the

Setup window (page 39). In Windows, to reset the value to its default, simultaneously hold down the <Ctrl>

key and click on the slider. On the Macintosh, to reset the value to its default, simultaneously hold down the

Command key and click on the slider.

Using a graph

Dragging one of the boxes in the graph (as shown above) changes the value of the corresponding parameter.

In Windows, simultaneously hold down the <Ctrl> key and click on the box to reset the corresponding value

to the default setting. To reset the entire graph and its values to the default setting, simultaneously hold down

the <Ctrl> key and click on any section in the graph (other than one of the boxes) to reset the entire graph

and its values to the default setting. On the Macintosh, simultaneously hold down the Command key and

click on the box to reset the corresponding value to the default setting. To reset the entire graph and its

values to the default setting, simultaneously hold down the Command key and click on any section in the

graph (other than one of the boxes) to reset the entire graph and its values to the default setting.

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

[File] menu

New

Creates and opens a new ﬁle containing the default Mixing setup and Voice data.

Open...

Opens an already saved ﬁle of the S90 XS/S70 XS Editor. The following ﬁle types can be selected and

opened.

• S90 XS/S70 XS Editor (.X2E)

• S90 ES Multi Part Editor (.M6E)

• S90 XS/S70 XS All Files (.X2A)

CAUTION

Unlike ﬁles of other applications such as word processors, only a single ﬁle can be opened and edited on the S90 XS/S70 XS Editor.

Before opening a new ﬁle, make sure to save the edited settings as a ﬁle to avoid losing data.

Save

Saves the current settings by overwriting the current ﬁle.

Save As...

Saves the current settings as a S90 XS/S70 XS Editor ﬁle (.X2E) under a new or different name.

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

Import

Imports the Voice data (a speciﬁc Voice in a speciﬁc folder or all Voices in a speciﬁc folder) from a different

ﬁle to the current ﬁle.

Click the File Select button (3), select a ﬁle including your desired Voice(s) so that the folders in the selected

ﬁle are listed as the Source Voice list (8), select a Voice or Voices or a folder or folders in the list (8), select

a destination location in the Destination Voice list (9) of the current ﬁle, then click [Import] to execute the

Import operation.

The following ﬁle types can be selected.

• S90 XS/S70 XS Editor (.X2E)

• MOTIF XS Editor (.X0E)

• MOTIF-RACK XS Editor (.X1E)

• S90 ES Voice Editor (.S7E)

• S90 ES Multi Part Editor (.M6E)

• S90 XS/S70 XS All (.X2A)

• S90 XS/S70 XS All Voice (.X2V)

• MOTIF XS All (.X0A)

• MOTIF XS All Voice (.X0V)

1 [X] (Close) button

Click this to close this window without importing.

2 File name (Indication only)

Indicates the currently selected ﬁle.

3 File selection button

Click this to open the dialog for ﬁle selection.

4 [Category]/[Bank] checkboxes

Click either of these boxes to determine whether the Voices in the Source Voice list (8) are divided into

Categories or Banks.

)

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

5 [Import] button

Click this to actually import the Voice(s) selected in the Source Voice list (8) to the speciﬁed location in

the Destination Voice list (9).

n You can also import Voice data without the use of this button by dragging the desired Voice or folder from the

Source Voice list then dropping it to the Destination Voice list.

n A Normal Voice cannot be imported to the User Drum Voice Bank. Likewise, a Drum Voice cannot be

imported to the User Normal Voice Bank. No Voices can be imported to the Preset Voice Bank.

6 [+]/[–] buttons

Click the [+] button to open all the folders so that all Voices appear in all folders. Click the [–] button to

close all folders.

7 Folder button (Bank or Category)

Double click here to open or close the folder.

8 Source Voice list

Indicates the Voices or folders of the selected ﬁle to be imported.

By right-clicking this section and selecting a menu, you can perform the following functions.

• Opening/Closing all the folders

• Determining whether the Voices listed here are divided into Category folders or Bank folders

9 Destination Voice list

Indicates the Voices or folders currently edited on the S90 XS/S70 XS Editor.

n By right-clicking this section and selecting a menu, you can open or close all the folders.

) Search box

You can search for your desired Voice from the Source Voice list (8) by inputting a keyword here.

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

Setup

Determines the basic setup of the S90 XS/S70 XS Editor. After setting necessary parameters, click [OK] to

actually apply the settings to the S90 XS/S70 XS Editor.

1 [X] (Close) button

Click this to close this window without applying the settings. This button is the same as the [Cancel]

button (#).

2 [Detail] button

You can make detailed settings for the Input Port and Output Port by setting this button to “On.” This

setting is necessary if the Port name is changed on a computer.

3 MIDI

Set the MIDI Port for communication between the S90 XS/S70 XS Editor and the S90 XS/S70 XS

instrument. When the [Detail] button (2) is set to “Off,” select a value such as “S90 XS” or “S70 XS” at

the “USB Device” column. When the [Detail] button (2) is set to “On,” select Port 1 and Port 4 for the

S90 XS/S70 XS in the MIDI In setting then select Port 1 and Port 4 for the S90 XS/S70 XS in the MIDI Out

settings.

n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the previously

used Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host

application.

n Keep in mind that setup on the host application (Studio Manager) is necessary before making settings here.

When starting Studio Manager as a stand-alone application, see page 5. When starting Studio Manager as a

plug-in of the DAW application, refer to the manual of the DAW application.

n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the S90 XS/

S70 XS instrument.

4 Device No.

Set the Device number to the same as the value speciﬁed in the MIDI display of the Utility mode on the

S90 XS/S70 XS itself. When the Device number on the S90 XS/S70 XS is set to “All,” set the Device No.

here to “1.”

9 !

)

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

5 Auto Sync Setting

This section lets you set how the data synchronization between the S90 XS/S70 XS Editor and the S90

XS/S70 XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data

synchronization is executed from the Auto Sync window (page 51) called up automatically under certain

circumstances such as clicking the [OFFLINE] button, starting the S90 XS/S70 XS Editor and opening a

new ﬁle on the Editor.

Global

Determines whether or not the Global data (see page 4) is synchronized and which data (S90 XS/S70 XS

Editor or S90 XS/S70 XS itself) is synchronized with the other.

Current

Determines whether or not the Current data (see page 4) is synchronized and which data (S90 XS/S70

XS Editor or S90 XS/S70 XS itself) is synchronized with the other.

Voice

Determines whether or not the Voice data (see page 4) is synchronized and which data (S90 XS/S70 XS

Editor or S90 XS/S70 XS itself) is synchronized with the other.

Auto Start

When this is set to “On” and one of the following operations is executed, data synchronization will be

started automatically as soon as the Auto Sync window is opened.

• When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on

the S90 XS/S70 XS, setting the MIDI Ports correctly on the computer, and making a proper

connection.

• When the connection between the S90 XS/S70 XS and a computer are corrected after

appropriately correcting the setup of the S90 XS/S70 XS and the computer.

• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after

appropriately reconnecting the devices.

n The parameters set here apply also to the parameters having the same names in the Auto Sync window.

CAUTION

When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain circumstances

(page 51) such as clicking the [OFFLINE] button, starting the Editor and opening a new ﬁle on the Editor. Keep in mind that

this will cause unexpected data loss on the S90 XS/S70 XS Editor or the S90 XS/S70 XS itself, since new data automatically

overwrites old data upon data synchronization. Make sure to save your important data before using the S90 XS/S70 XS

Editor.

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

6 Knob Guide

Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting

this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s

parameter.

7 Knob Mouse Control

Determines how the knob illustrated at right responds to

your mouse control.

Circular

When this is selected, you can jump to a speciﬁc value by clicking at a point within the Knob editing

area. You can edit the value also by dragging the mouse in a circular direction—in much the same way

as turning an actual knob.

Relative Circular

When this is selected, you can edit the value by dragging the mouse in a circular direction—in much the

same way as turning an actual knob.

Linear

When this is selected, you can edit the value by dragging any point in the knob editing area (the mouse

pointer disappears) and moving it vertically or horizontally—in much the same way as operating a slider.

8 Slider Mouse Control

Determines how the Slider illustrated at right responds to your

mouse control.

Jump

When this is selected, clicking any location in the slider jumps the slider pointer to that location.

Touch

When this is selected, you can edit the value by dragging and moving the slider pointer horizontally—in

much the same way as operating an actual slider. Clicking at any location in the slider (other than the

orange pointers) does not affect the slider.

Ramp

When this is selected, clicking at any location in the slider (other than the orange pointers) moves the

nearest pointer to that location. Dragging any point in the slider moves the slider pointer accordingly.

Relative

When this is selected, you can edit the value by dragging any point (the mouse pointer disappears) and

moving it horizontally.

9 Keyboard Velocity

Determines the Velocity value generated when clicking any note on the virtual keyboard at the bottom of

the Editor window. When “Fix” is turned on, clicking any key generates the same velocity value which

can be speciﬁed in the box at right of “Fix.” When “Free” is turned on, the generated Velocity value

differs depending on the click location. The lower on the key graphic you click, the higher the Velocity.

Knob Guide: On Knob Guide: Off

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

) Inc/Dec Action

Determines how the triangular buttons ([▲]/[▼]/[L]/[M]) located at the parameter boxes as illustrated

below work.

Inc/Inc:

When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button

moves the cursor downward by one item.

Inc/Dec:

When this is selected, clicking the [▲] button increases the value by 1 while clicking the [L] button

moves the cursor upward by one item.

Dec/Inc:

When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button

moves the cursor downward by one item.

Dec/Dec:

When this is selected, clicking the [▲] button decreases the value by 1 while clicking the [L] button

moves the cursor upward by one item.

! Startup Mode

This section lets you set the startup mode when launching the S90 XS/S70 XS Editor.

Voice

The editor will start in the Voice mode.

Multi

The editor will start in the Multi mode.

@ [OK] button

Click this to actually apply the settings to the S90 XS/S70 XS Editor and close the Setup window.

# [Cancel] button

Click this to close the Setup window without applying the settings to the S90 XS/S70 XS Editor.

Menu: [File] menu

S90 XS/S70 XS Editor Owner’s Manual

Hardware Utility

From the Hardware Utility window called up by selecting this menu, you can make the settings related to the

parameters in the Utility mode of the S90 XS/S70 XS. Editing the parameter on this window will affect the

parameter having the same name of the S90 XS/S70 XS instrument. After making the settings, click [Store] at

the bottom of this window to store the settings as Global data.

S90 XS/S70 XS Editor

(parameters on the above window)

S90 XS/S70 XS instrument

1 Tone Note Shift [UTILITY] → General → Note Shift

Tune [UTILITY] → General → Tune

2 Auto Load Setup Power On Mode [UTILITY] → General → Power On Mode

3 MIDI Channel Basic Receive Ch [UTILITY] → MIDI → Basic Receive Ch

Keyboard Transmit Ch [UTILITY] → MIDI → Keyboard Transmit Ch

4 MIDI Sync MIDI Sync [UTILITY] → MIDI → MIDI Sync

Clock Out [UTILITY] → MIDI → Clock Out

5 MIDI Switch Bank Select [UTILITY] → MIDI → Bank Select Sw

Program Change [UTILITY] → MIDI → Prg Change Sw

Local Control [UTILITY] → MIDI → Local Control

6 MIDI Other Controller Reset [UTILITY] → MIDI → Controller Reset

7 Quick Setup 1, 2, 3 [UTILITY] → Quick Set → Quick Setup

Menu: [Edit] menu

S90 XS/S70 XS Editor Owner’s Manual

[Edit] menu

Undo

Cancels the changes you made in your most recent editing. [Undo] menu will be black and cannot be

selected depending on the most recent edited parameter.

Redo

Redo is available only after using Undo, and lets you restore the changes you made before undoing them.

Copy

Copies the selected items such as characters of the Voice name in the text box, Voice(s) in the VOICE

LIBRARY window and entire Part setup to the clipboard.

Paste

Pastes the Voice(s), entire Part setup, and characters from the clipboard to the speciﬁed location.

Initialize Current Voice (in the Voice mode)/Initialize Current Part Voice (in the Multi

mode)

In the Voice mode, select [Initialize Current Voice] under [Edit] to call up the Initialize Current Voice window

from which you can initialize the current Voice by clicking [Start]. In the Multi mode, select [Initialize Current

Part Voice] under [Edit] to call up the Initialize Current Part Voice window from which you can initialize the

Voice assigned to the current Part by clicking [Start].

When a Normal Voice is edited:

Voice mode Multi mode

Menu: [Edit] menu

S90 XS/S70 XS Editor Owner’s Manual

When a Drum Voice is edited:

1 [X] (Close) button

Click this to close the window without executing Initialization.

2 [All]/[Clear] button

Clicking [All] turns all the checkboxes in this window on while clicking [Clear] turns them off.

3 [Common] checkbox

When this is turned on, clicking [Start] initializes the settings of all the Common parameters (Voice

Common parameters when the Editor is set to the Voice mode or Part Common parameters when the

Editor is set to the Multi mode).

4 with Wave Assignment

When this is turned on, clicking [Start] initializes the Waveform assignment for all Elements of the current

Voice.

5 Element [1] – [8] or Drum Key C0 – C6 checkboxes

When a Normal Voice is edited, clicking [Start] initializes the settings of all parameters for the Elements

which are turned on here. When a Drum Voice is edited, clicking [Start] initializes the settings of all

parameters for the drum keys which are turned on here.

6 [Start] button

After the setup is completed, click [Start] to initialize the parameter settings and close the window.

Menu: [Edit] menu

S90 XS/S70 XS Editor Owner’s Manual

Initialize Current Mixing (only in the Multi mode)

Select this menu to call up the Initialize Current Mixing window, set the parameters as necessary, then click

[Start] to initialize the Voice data assigned to the current Part.

1 [X] (Close) button

Click this to close the window without executing Initialization.

2 [All]/[Clear] button

Clicking [All] turns all the check boxes in this window on while clicking [Clear] turns them off.

3 [Multi Common] checkbox

When this is turned on, clicking [Start] initializes the settings of all the Multi Common parameters.

4 Initialize Template

The following templates for initializing are available.

Normal:

When this is selected, clicking [Start] initializes the Editor setup to the normal default settings.

GM:

When this is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/S70 XS can be used

as a GM tone generator.

Contemporary R&B – TurkishPop:

When one of these templates is selected, clicking [Start] initializes the Editor Setup so that the S90 XS/

S70 XS can be used as a tone generator which matches the name of the selected template.

5 Part [1] – [16] checkboxes

Clicking [Start] initializes the settings of all parameters for the Parts which are turned on here.

6 [AD] checkbox

When this is turned on, clicking [Start] initializes the settings of all parameters for the A/D Part.

7 [Start] button

After setup is completed, click [Start] to initialize the Mixing setup and close the window.

Menu: [Edit] menu

S90 XS/S70 XS Editor Owner’s Manual

Store Global

Simply selecting this menu will store the Global settings. The Global settings will be stored only to the internal

memory of the S90 XS/S70 XS instrument.

Store Voice

From the window selected via this menu, you can store the edited Voice. The current Voice is stored in the

Voice mode while the Voice assigned to the current Part is stored in the Multi mode. Select the desired Bank

folder (5), select the number of the destination Voice (6), input the Voice name (2), then click the [Store]

button to store the Voice as a User Voice or Mixing Voice (available only in the Multi mode).

1 [X] (Close) button

Click this to close this window without executing the Store operation.

2 Voice Name

Enter an original name for the Voice to be stored.

3 [Store] button

Click this to store the edited Voice to the speciﬁed Bank and number.

CAUTION

Like other parameters, the Voice data is synchronized with the S90 XS/S70 XS instrument when ONLINE (page 12) is

indicated. This means that clicking [Store] in this window stores the edited Voice to the corresponding Bank in the internal

memory of the S90 XS/S70 XS instrument. Be careful not to overwrite any important data.

4 [+]/[–] buttons

Pressing the [+] button opens all the Bank folders, while pressing the [–] button closes them.

Menu: [Edit] menu

S90 XS/S70 XS Editor Owner’s Manual

5 Bank folder

This section indicates the following Banks to which you can store the edited Voice.

• Normal User 1

• Normal User 2

• Normal User 3

• Normal User 4

• Drum User

• Mixing

Clicking on each Bank folder opens it and all the Voices stored in the Bank appear as illustrated above

(from the left illustration to the right one). When clicking the Bank folder again, it closes as illustrated

above (from the right illustration to the left one).

Note that the indicated Bank differs depending on the current mode and current Voice type. The Mixing

Bank is shown only in the Multi mode. The Drum User Bank is shown only when the Drum Voice is

selected (in the Voice mode) or the Drum Voice is assigned to the current Part (in the Multi mode).

Likewise, the Normal User Bank is shown only when the Normal Voice is selected (in the Voice mode) or

the Normal Voice is assigned to the current Part (in the Multi mode).

6 Voices

The Voices in the selected Bank are listed. Before clicking the [Store] button, you need to select the

number of the destination Voice here. Right clicking on this section calls up the menus “All Open” and

“All Close,” letting you open or close all the Bank folders.

Store Mixing (only in the Multi mode)

This menu lets you store the Mixing settings in the Multi mode. Select the desired Multi number and enter the

desired name, then click the [Store] button to store the Mixing settings to internal memory (overwritten to the

currently selected Multi) of the S90 XS/S70 XS instrument.

Voice Compare

This menu lets you switch between the just-edited Voice and its original, unedited condition, allowing you to

hear how your edits affect the sound. Select “Voice Compare” to enter the Voice Compare mode. In this

mode, you can hear the sound of the original Voice and none of the parameters in the window can be edited.

Select “Voice Compare” again to return to the original status.

n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Voice Compare mode on the S90 XS/

S70 XS Editor.

Mixing Compare (only in the Multi mode)

This menu lets you switch between the just-edited Mixing and its original, unedited condition, allowing you to

hear how your edits affect the sound. Select “Mixing Compare” to enter the Mixing Compare mode. In this

mode, you can hear the sound of the original Mixing setup and none of the parameters in the window can be

edited. Select “Mixing Compare” again to return to the original status.

n The status of the S90 XS/S70 XS instrument is maintained even if you enable the Mixing Compare mode on the S90 XS/

S70 XS Editor.

Menu: [Bulk] menu

S90 XS/S70 XS Editor Owner’s Manual

[Bulk] menu

Data Sync

Select this menu to call up the Initialize Data Sync window, set the parameters as necessary, then click

[Start] to transmit the speciﬁed data from/to the S90 XS/S70 XS Editor to/from the S90 XS/S70 XS instrument.

1 [X] (Close) button

Click this to close this window without executing Data Sync.

2 [Transmit]/[Receive] checkboxes

Determines whether the S90 XS/S70 XS Editor transmits data to the S90 XS/S70 XS or receives data from

the S90 XS/S70 XS.

[Transmit] checkbox:

When this is checked, clicking [Start] button transmits data from the Editor to the instrument.

[Receive] checkbox:

When this is checked, clicking [Start] button transmits data from the instrument to the Editor.

3 Data type to be transmitted/received

Here, you can set which data type is to be transmitted or received. Clicking the [All] button turns all the

data types on while clicking the [Clear] button turns all the data types off.

Current

Turn this on then click the [Start] button to transmit or receive the Current settings.

Global

Turn this on then click the [Start] button to transmit or receive the Global settings.

Preset (Favorites)

Turn this on then click the [Start] button to transmit or receive the Favorites-related settings of the Preset

Voice(s).

Normal User 1 – 4

Turn this on then click the [Start] button to transmit or receive the data of the Normal User Voice Bank 1,

2, 3, and 4 respectively.

Drum User

Turn this on then click the [Start] button to transmit or receive the data of the Drum User Voice Bank.

5 6

Menu: [Help] menu

S90 XS/S70 XS Editor Owner’s Manual

4 Progress Bar

Shows how much of the data has been transmitted.

5 [Start] button

After setup is completed, click the [Start] button to actually execute data transmission.

6 [Stop] button

This button is available only when data transmission is being executed and allows you to cancel the

transmission.

[Help] menu

Manual

Selecting this menu calls up this manual in PDF format.

About

Selecting this menu calls up information such as the version number of the S90 XS/S70 XS Editor.

S90 XS/S70 XS Editor Owner’s Manual

Auto Sync window

This window is used for changing the status of the Editor from “OFFLINE” to “ONLINE.” While editing a parameter

on the Editor affects the same parameter on the S90 XS/S70 XS instrument and vice versa in the Online status, you

can disable the “mirroring” of parameter changes between the devices by switching to Ofﬂine status. The Auto

Sync window can be called up by clicking “OFFLINE” on the Editor window when the Editor is in the Ofﬂine status.

The Auto Sync window can also be called up automatically (without clicking “OFFLINE”) under the following

circumstances:

• When opening a ﬁle.

• When creating a new ﬁle by selecting “New” under the File menu.

• When changing the mode on the Editor in the Online status of the Editor.

• When changing the mode on the S90 XS/S70 XS instrument in the Online status of the Editor.

• When the connection between the S90 XS/S70 XS and a computer are corrected after appropriately correcting

the setup of the S90 XS/S70 XS and the computer.

• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after appropriately

reconnecting the devices.

n If the Auto Start parameter is set to “On” in the Auto Sync window, data synchronization may be started automatically as

soon as the Auto Sync window is opened in certain conditions. For details, see page 40.

On the Auto Sync window, set the Data Port properly then click [Start] button to execute data synchronization. As

soon as the data synchronization is completed, the Auto Sync window is closed then the OFFLINE indication

changes to ONLINE automatically.

1 [X] (Close) button

Click this to close this window without executing data synchronization.

2 [Detail] button

3 Port

4 Device No.

5 Auto Sync Setting

These parameters are same as in the Setup window. See page 39.

6 Progress Bar

7 [Start] button

8 [Stop] button

These parameters are same as in the Data Sync window. See page 50.

Troubleshooting

S90 XS/S70 XS Editor Owner’s Manual

Troubleshooting

If you encounter problems such as no sound output or abnormal behavior, verify the connections before

checking the following.

Sound does not change when using the knobs or sliders.

• Is “ONLINE” indicated on the Editor window?

• Is the lamp at left of “ONLINE” indicator turned on?

If it is turned off, the settings related to communication between the S90 XS/S70 XS and a

computer may be wrong. Check the MIDI Port setting on the S90 XS/S70 XS Editor and Studio

Manager, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the S90

XS/S70 XS instrument, or the cable connection between the S90 XS/S70 XS and the computer.

• Check the MIDI Port setting and Device No. setting. (page 39)

Bulk data is not transmitted/received successfully.

• Check the same points as above such as “ONLINE” indication and MIDI Port settings.

The appropriate Port is not shown in the Setup window.

• The MIDI Port in the Setup window can be selected from the Ports speciﬁed in the host

application. Check the MIDI Port settings in the host application.

• When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the

previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port

settings in the host application.

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

905MW-A0

Yamaha S90 Manual de usuario

Marca: Yamaha

Modelo: S90

Categoría: Pianos digitales

Tipo: Manual de usuario

Descargar PDF

informe

En otros idiomas

français: Yamaha S90 Manuel utilisateur
italiano: Yamaha S90 Manuale utente
English: Yamaha S90 User manual
Deutsch: Yamaha S90 Benutzerhandbuch
русский: Yamaha S90 Руководство пользователя
Nederlands: Yamaha S90 Handleiding
português: Yamaha S90 Manual do usuário
dansk: Yamaha S90 Brugermanual
polski: Yamaha S90 Instrukcja obsługi
čeština: Yamaha S90 Uživatelský manuál
svenska: Yamaha S90 Användarmanual
Türkçe: Yamaha S90 Kullanım kılavuzu
suomi: Yamaha S90 Ohjekirja
română: Yamaha S90 Manual de utilizare

Yamaha S90 Manual de usuario

Yamaha S90 Manual de usuario

En otros idiomas

Documentos relacionados