Glacier Bay 67732W-6001 Guía de instalación

Categoría
Artículos sanitarios
Tipo
Guía de instalación
THANK YOU
INSTALLATION AND CARE GUIDE
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Model#
67732W-6001
SINGLE-HANDLE LAVATORY FAUCET
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
4/2017REV.03THD
SKU#
294694
2
Table of Contents
Important Information ..............................2
Warranty ...................................................2
Pre-Installation .........................................2
Planning Installation ..............................2
Package Contents ..................................3
Installation ................................................4
Care and Cleaning ....................................9
Troubleshooting ........................................9
Service Parts
...........................................
10
Important Information
Observe all local plumbing and building codes.
Cover the sink drain to avoid losing any parts.
Review the care and cleaning section included in this guide.
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service
for replacement parts
TOOLS AND HARDWARE REQUIRED
Adjustable
wrench
Safety
goggles
SILICONE
Silicone
sealant
Tools and Hardware Required ...............2
Operation...................................................8
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
HacksawPliers
3
Pre-Installation (continued)
PACKAGE CONTENTS
Faucet Assembly
ClickInstall Drain Assembly
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
Part Description Quantity
A 1Faucet
B 1Rubber washer
C 1Metal washer
D 2Lock nut
E 1Flange
Part Description Quantity
NOTE: *Items H - L come pre-assembled.
F 1Deck plate
G 1Gasket
H 1Pop up stopper
I 1Pop-up ange
J 1Rubber washer
K 1Lock nut
L 1Drain body
M 1Joint
N 1Horizontal rod
O 1Lift rod strap
Q 1Lift rod
P 1Clip
A
B
C
D
E
F
G
Q
H*
I*
J*
K*
O
P
L*
M
N
Installation
4
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Shut off the water supply. Remove the old
faucet.
Before installation, ensure that the ange (E) is
placed on the bottom of the new faucet (A).
2
Securing the faucet
From underneath sink, secure the faucet
assembly (A) with the rubber washer (B),
metal washer (C) and nuts (D). Use the wrench
to tighten the nuts (D).
WITH DECK PLATE: Align the hole in the gasket
(G) and deck plate (F) with the mounting hole in
the sink. Place the faucet (A) through the deck
plate (F) and mounting hole in the sink until
the faucet (A) sets on top of deck plate (F).
Clean the mounting surface.
Remove the preassembled lock nuts (D) and
washers (B & C) from the new faucet (A).
WITH FLANGE: Place the faucet (A) through the
mounting holes in the sink until the faucet (A)
sets on top of the sink.
A
F
G
A
E
D
1
B
C
D
2
NOTE: When you insert the lift rod (Q), the lift rod (Q) can
go through the faucet (A) and down into the slot of the
washers (B & C).
5
Installation (continued)
4
Installing the drain body
Apply silicone sealant (not included) under the
drain ange (I) and place the drain ange (I)
into the drain hole of the sink.
From underneath the sink, screw the drain
body (L) onto the drain ange (I). Ensure that
the opening (1) for the ball rod on the drain
body (L) faces towards the rear of the sink.
3
Preparing the pop-up assembly
Remove the pop-up stopper (H) and drain
ange (I) from the drain body (L).
Tighten the rubber washer (J) and lock nut (K)
on the drain body (L). Hand-tighten only.
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
H
I
L
1
2
I
J
K
SILI
L
1
6
Installation (continued)
5
Installing the stopper and
horizontal rod
Insert the stopper (H) into the drain hole in the
sink.
Before installation, unscrew the protective
cap (1) from the horizontal rod (N).
Insert the horizontal rod (N) into the drain body
(L) and through the hole of the stopper (H) until
you hear a click. See insert 2. You can press the
two sides of the joint (M) to remove the
horizontal rod (N).
6
Installing the lift rod
Slide the lift rod (Q) down into the lift rod strap
(O) through the faucet (A) until it clicks into the
lift rod strap (O).
NOTE: For easier removal and cleaning, rotate the stopper
(H) 90 degrees so that the horizontal rod (N) does not go
through the hole in the stopper (H). See insert 3.
1
1
N
2
L
H
3
Insert 3
Insert 2
M
N
L
M
2
Q
O
Q
O
NOTE: If a shorter lift rod (Q) is required for your
installation, you may call Glacier Bay Customer Service
for assistance.
1
Q
A
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
7
Installation (continued)
8
Adjusting the length of lift rod strap
If the pop up lift rod strap (O) is interfering with your installation, as shown in Fig. 1, the lift rod strap (O)
can be cut shorter.
Once you have identied the proper hole in the lift rod strap (O) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (O) by snapping it off with pliers or cutting it off with
a saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (P) does not slide off the lift rod strap (O).
Fig. 1 Fig. 2
7
Slide the clip (P) upward, adjust the location of the lift rod strap (O) to the appropriate height and insert
the horizontal rod (N) with the correct hole of the lift rod strap (O).
Move the lift rod strap (O) in or out to choose an appropriate location.
Press the horizontal rod (N) down to ensure the stopper (H) is in the maximum open position.
Attaching the horizontal rod and strap
Slide the clip (P) downward until it secures with the horizontal rod (N).
Hole
5
N
H
P
O
1
2
3
3
N
H
P
O
P
4
4
N
H
P
O
O
1
2
O
O
P
1
Flushing and checking for leaks
IMPORTANT: After installation is complete, remove the
aerator from the faucet (A) to ush the water lines. Do not
lose the gasket (1) in the aerator.
Operation
Ensure the faucet (A) handle is in the off
position, and turn on the water supply to check
for leaks. If you discover any leaks, check your
connections to ensure they are installed properly.
Remove the aerator and housing (if applicable).
Turn on the hot and cold water handle to allow
the water to run for at least one minute. This
ushes away any debris that could cause
damage to internal parts.
Turn off the water and reinstall the aerator and
housing (if applicable).
8
Installation (continued)
9
Checking the operation of the
pop-up
Operate the lift rod (Q) up and down to verify
that the stopper (H) opens and closes correctly.
H
Q
1
A
10
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
1
2
HOMEDEPOT.COM/GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
9
Troubleshooting
Problem Possible Cause Solution
There are leaks from the
handle.
The bonnet nut has come loose and/or the
washer is dirty or damaged.
Tighten the bonnet nut.
Clean or replace the washer.
The aerator has an
irregular or reduced
water ow.
Remove the aerator and
check for debris.
Ensure that the rubber washer
is properly installed.
The water will not shut off
completely.
The cartridge is dirty or broken. Remove the handle to check
the cartridge.
Clean or replace.
The aerator is dirty or mis-tted.
Care and Cleaning
To clean, wipe down with a damp cloth and dry with a towel.
Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
NOTE: Refer to the service parts section in this manual for
a detailed drawing showing the location of the parts listed
below.
There is leaking from the
sink drain at the base of
the sink.
The sink has a rough or irregular surface. Apply additional silicone sealant
to the beveled side of the drain
ange.
Retighten and test for leaks.
10
Service Parts
*Specify Finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at HOMEDEPOT.COM
Faucet ID tags can
be found on the
hot water inlet
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
Part Description Part Number
1 RP13466*
2 Set screw RP50002
3 Index RP80390*
5 Bonnet nut RP70242
6 Screw RP50015
7 Cartridge RP20044
8 Aerator RP30245*
10 Deck plate RP80549*
Handle
4 Cap RP80132*
11 Gasket RP80550
9 Flange RP80548*
12 Rubber washer RP64008
14 Lock nut RP56111
15
ClickInstall™ drain
assembly
RP40228*
16
Lift rod RP40230*
Part Description Part Number
13 Metal washer RP64009
Questions, problems, missing parts?
Before returning to the store, call Glacier Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Retain this manual for future use.
GRACIAS
GUÍA DE USO Y MANTENIMIENTO
¿Problemas, preguntas o piezas faltantes?
Antes de regresar a la tienda, llama al servicio al cliente de
Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los
sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Modelo núm.
67732W-6001
GRIFO PARA LAVAMANOS, DE UNA SOLA LLAVE
Agradecemos la conanza que has depositado en Glacier Bay al comprar este grifo para lavamanos. Nos esforzamos
por crear continuamente productos de calidad diseñados para mejorar tu hogar. Visítanos en Internet para ver
nuestra línea completa de productos disponibles para las necesidades de mejoras de tu hogar. ¡Gracias por
elegir a Glacier Bay!
SKU núm.
294694
13
Información importante
Cumple con todos los códigos locales de construcción y de plomería.
Cubre el drenaje del lavabo para evitar que se pierda alguna pieza.
Consulta la sección de mantenimiento y limpieza incluida en esta guía.
HERRAMIENTAS Y HERRAJES NECESARIOS
Tabla de contenido
Información importante .........................13
Garantía...................................................13
Pre-instalación .......................................13
.............13
Herramientas y herrajes necesarios ....13
Contenido del paquete .........................14
Instalación ..............................................15
Funcionamiento ......................................19
Cuidado y limpieza ................................20
Piezas de repuesto ................................21
Planicación de la instalación
Solución de problemas ...........................20
Pre-instalación
PLANIFICACIÓN DE LA INSTALACIÓN
Antes de comenzar la instalación de este producto, asegúrate de que no falta ninguna pieza. Compara las piezas
con la lista de Contenido del paquete. Si falta alguna pieza o está dañada, no intentes instalar el producto.
Comunícate con el servicio al cliente para piezas de repuesto.
Garantía
GARANTÍA LIMITADA DE POR VIDA
Los productos de Glacier Bay están fabricados con normas y mano de obra de calidad superior y están respaldados
por nuestra garantía de por vida limitada. Glacier Bay garantiza al comprador consumidor original que sus productos
no presentan defectos materiales o de fabricación. Reemplazaremos GRATIS cualquier producto o pieza defectuosos.
Simplemente, devuelva el producto o pieza a cualquiera de las tiendas minoristas de The Home Depot o llame al
1-855-HD-GLACIER (1-855-434-5224) para recibir el artículo de reemplazo. El comprobante de compra (recibo de venta
original) del comprador consumidor original debe estar disponible para todos los reclamos de garantía de Glacier Bay.
Esta garantía excluye daños y fallos incidentales/consecuenciales debido al mal uso, abuso o desgaste normal por
el uso. Esta garantía excluye todos los usos industriales, comerciales y de negocios, a cuyos compradores se les
extiende en la presente una garantía limitada de cinco años a partir de la fecha de compra, con todos los otros
artículos de esta garantía que aplican excepto la duración de la garantía.
Algunos estados y provincias no permiten la exclusión o la limitación de los daños incidentales o consecuentes,
por lo tanto, las limitaciones y exclusiones anteriores podrían no aplicarse a su caso. Esta garantía le otorga derechos
tienda o llame al 1-855-HD-GLACIER para obtener más detalles.
Llave
ajustable
Gafas de
seguridad
SILICONE
Sellador
de silicona
Sierra
para
metales
Alicate
Ensamblaje de desagüe ClickInstall
14
Pre-instalación (continuación)
CONTENIDO DEL PAQUETE
Ensamblaje de
la mezcladora
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, llama al 1-855-HD-GLACIER.
Pieza Descripción Cantidad Pieza Descripción Cantidad
NOTA: *Los artículos H - L vienen preensamblados.
A 1Mezcladora
D 2Tuerca de bloqueo
F 1Placa de la cubierta
G 1Junta
E 1Brida
H 1Tapón emergente
I 1Brida emergente
J 1Arandela de goma
K 1Tuerca de bloqueo
L 1Cuerpo del drenaje
M 1Junta
N 1Varilla horizontal
O 1
Correa de la varilla
de elevación
Q 1Varilla de elevación
P 1Sujetador
B 1Arandela de goma
C 1Arandela metálica
A
B
C
D
E
F
G
Q
H*
I*
J*
K*
O
P
L*
M
N
Instalación
15
1
Cómo instalar el ensamblaje
del grifo
PRECAUCIÓN: Cierra siempre el suministro de agua
antes de retirar un grifo existente o reemplazar alguna
parte del mismo. Abre la llave del grifo para liberar la
presión de agua y asegúrate de que el suministro de agua
esté completamente cerrado.
Antes de la instalación, asegúrate de que la brida
(E) esté en la parte inferior del grifo nuevo (A).
CON PLACA DE CUBIERTA: Alinea el oricio en la
junta (G) y la placa de cubierta (F) con el oricio de
montaje del lavamanos. Coloca el grifo (A) a través
de la placa de cubierta (F) y el oricio del montaje
del lavamanos hasta que el grifo (A) se asiente en
la parte superior de la placa de cubierta (F).
2
Cómo fijar el grifo
Desde abajo del lavamanos, ajusta el ensamblaje
del grifo (A) con la arandela de goma (B), la
arandela de metal (C) y las tuercas (D). Usa la
llave para apretar las tuercas (D).
Cierra el suministro de agua. Retira el grifo
anterior.
Limpia la supercie de montaje.
Retira las contratuercas (D) preensambladas
y las arandelas (B y C) del grifo (A) nuevo.
CON BRIDA: Coloca el grifo (A) a través de los
oricios de montaje del lavamanos hasta que el
grifo (A) se asiente en la parte superior del
lavamanos.
A
F
G
A
E
D
1
B
C
D
2
NOTA: Cuando insertes la varilla de elevación (Q), esta (Q)
tiene que pasar a través del grifo (A) y hacia abajo dentro
de la ranura de las arandelas (B & C).
16
Instalación (continuación)
4
Cómo instalar el cuerpo del
drenaje
Aplica sellador de silicona (no incluido) debajo
de la brida del drenaje (I) y coloca ésta dentro
del oricio de drenaje del lavabo.
Desde la parte inferior del lavabo, enrosca el
cuerpo del drenaje (L) en la brida del drenaje (I).
Asegúrate de que la abertura (1) para la varilla
de bola del cuerpo del drenaje (L) esté frente
a la parte posterior del lavabo.
3
Cómo preparar el ensamblaje
emergente
Retira el tapón emergente (H) y la brida del
desagüe (I) del cuerpo del desagüe (L).
Aprieta la arandela de goma (J) y la tuerca de
bloqueo (K) en el cuerpo del drenaje (L).
Ajusta sólo con la mano.
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, llama al 1-855-HD-GLACIER.
H
I
L
1
2
I
J
K
SILI
L
1
Antes de la instalación, desenrosca la tapa
protectora (1) de la varilla horizontal (N).
17
Instalación (continuación)
5
Cómo instalar el tapón y la
varilla horizontal
Inserta el tapón (H) en el oricio del drenaje del
lavabo.
Inserta la varilla horizontal (N) en el cuerpo del
desagüe (L) y a través del oricio del tapón (H)
hasta que escuches un clic. Consulta el folleto 2.
Puedes presionar ambos lados de la junta (M)
para retirar la varilla horizontal (N).
Folleto 3
Folleto 2
6
Cómo instalar la varilla de
elevación
Desliza la varilla de elevación (Q) hacia abajo
en la correa de la varilla (O) y a través del
grifo (A) hasta que haga clic dentro de la
correa (O).
NOTA: Para retirar y limpiar más fácilmente, gira el tapón
(H) a 90º de manera que la varilla horizontal (N) no atraviese
el oricio del tapón (H). Consulta el folleto 3.
1
1
N
2
L
H
3
M
N
L
M
NOTA: Si necesitas una varilla de elevación (Q) más corta
para tu instalación, puedes llamar al Servicio al Cliente de
Glacier Bay para recibir ayuda.
2
Q
O
Q
O
1
Q
A
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, llama al 1-855-HD-GLACIER.
18
Instalación (continuación)
8
Cómo ajustar el largo de la correa de la varilla de elevación
Si la presilla de la varilla de elevación (O) interere con tu instalación, como se muestra en la Fig. 1, la
presilla de la varilla de elevación (O) puede recortarse.
Una vez que hayas identicado el oricio adecuado en la presilla de la varilla de elevación (O) que es
necesario para tu instalación, puedes recortar la porción inferior (1) de la presilla de la varilla de elevación
(O) partiendo con alicates o cortando con una sierra en el punto de corte (2), como se muestra en la Fig. 2.
Asegúrate de que la presilla (P) no se salga de la correa de la varilla de elevación (O).
Desliza la presilla (P) hacia arriba, ajusta la ubicación de la correa de la varilla de elevación (O) a la altura
adecuada e inserta la varilla horizontal (N) con el oricio correcto de la varilla de elevación (O).
Mueve la correa de la varilla de elevación (O) hacia adentro o hacia afuera para seleccionar la ubicación
adecuada.
7
Presiona hacia abajo la varilla horizontal (N) para garantizar que el tapón (H) esté abierto completamente.
Cómo instalar la varilla horizontal y la correa
Oricio
Desliza la presilla (P) hacia abajo hasta que la varilla horizontal (N) esté asegurada.
5
N
H
P
O
1
2
3
3
N
H
P
O
P
4
4
N
H
P
O
O
1
2
O
O
P
Fig. 1 Fig. 2
1
Cómo purgar las tuberías y
comprobar que no haya fugas
IMPORTANTE: Después de terminar la instalación, retira
el aireador del grifo (A) para descargar las líneas de agua.
No aojes la junta (1) en el aireador.
Funcionamiento
Asegúrate de que las llave del grifo (A) estén
cerradas y abre el suministro del agua para
comprobar que no haya ltraciones. Si descubres
alguna ltración, verica tus conexiones para
asegurarte de que estén instaladas adecuadamente.
Retira el aireador y la carcasa (si corresponde).
Abre la llave de agua caliente y fría; deja que
corra agua por al menos un minuto. Esto elimina
cualquier desecho que pudiera dañar las piezas
internas.
Cierra el suministro de agua y vuelve a colocar
el aireador y la carcasa (si corresponde).
19
Instalación (continuación)
9
Cómo verificar el
funcionamiento del tapón
emergente
Mueve la varilla de elevación (Q) hacia arriba y
abajo para vericar que el tapón (H) se abre y
cierra correctamente.
H
Q
1
A
1
2
NOTA: El tubo de entrada del agua caliente se identica
con una etiqueta. Evita enroscar los cables juntos o
colocarlos cerca y evita dañarlos.
Enrosca la tuerca (1) de la línea de suministro
en la salida de la válvula de suministro de
agua (2) y aprieta con una llave. No aprietes
demasiado.
10
Cómo hacer las conexiones
del suministro de agua
HOMEDEPOT.COM/GLACIERBAY
Para obtener asistencia, llama al 1-855-HD-GLACIER.
20
Cuidado y limpieza
Para limpiar, usa un paño húmedo y seca con una toalla.
No uses limpiadores abrasivos, esponjas de alambre o productos químicos fuertes para limpiar esta
mezcladora, pues ello anulará la garantía.
Solución de problemas
Problema Posible causa Solución
Hay ltración por el
maneral.
La tuerca del bonete se ha aojado y/o la
arandela está sucia o dañada.
Aprieta la tuerca del bonete.
Limpia la arandela o reemplázala.
El aireador tiene un ujo
de agua irregular o
reducido.
Retira el aireador y verica si
hay suciedades.
Asegúrate de que la arandela de
goma esté bien instalada.
El suministro de agua no
se corta completamente.
El cartucho está sucio o dañado. Retira la llave para revisar el
cartucho.
Limpia o reemplaza.
El aireador está sucio o mal instalado.
NOTA: Consulta la sección de piezas de repuesto de este
manual para ver un dibujo detallado que muestra la
ubicación de las piezas enumeradas a continuación.
Hay una ltración
proveniente del desagüe
del lavamanos en su base.
El lavamanos tiene una supercie rugosa
o irregular.
Aplica más sellador de silicona
al lado biselado de la brida del
drenaje.
Aprieta nuevamente y verica
que no haya ltraciones.
21
Piezas de repuesto
*Especicar acabado
Muchos cartuchos de repuesto, aireadores y
ensamblajes de drenaje pueden comprarse en
tu tienda de The Home Depot local o por internet
en WWW.HOMEDEPOT.COM
Las etiquetas de
identicación de
la mezcladora
pueden encontrarse
en la entrada de
agua caliente.
Pieza Descripción Número de pieza
1 RP13466*
2 Tornillo de jación RP50002
3 Índice RP80390*
5 Tuerca del bonete RP70242
6 Tornillo RP50015
7 Cartucho RP20044
8 Aireador RP30245*
10 Placa de la cubierta RP80549*
Llave
4 Tapa RP80132*
11 Junta RP80550
9 Brida RP80548*
12 Arandela de goma RP64008
14 Tuerca de bloqueo RP56111
15
Ensamblaje de
desagüe ClickInstall™
RP40228*
16
Varilla de elevación RP40230*
Pieza Descripción Número de pieza
13 Arandela metálica RP64009
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
¿Problemas, preguntas o piezas faltantes?
Antes de regresar a la tienda, llama al servicio al cliente de
Glacier Bay de lunes a viernes entre 8 a.m. y 7 p.m. y los
sábados entre 9 a.m. y 6 p.m.(hora estándar del Este)
1-855-HD-GLACIER (1-855-434-5224)
HOMEDEPOT.COM/GLACIERBAY
Conserva este manual para uso futuro.
1 / 1

Glacier Bay 67732W-6001 Guía de instalación

Categoría
Artículos sanitarios
Tipo
Guía de instalación

En otros idiomas