Samsung BD-ES6000 Manual de usuario

Marca: Samsung

Modelo: BD-ES6000

Categoría: Reproductores de Blu-Ray

Tipo: Manual de usuario

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

Blu-ray

™

Disc Player

user manual

BD-ES6000

02235C-BD-ES6000-ZX-ENG.indd 1 2012-04-25 오후 2:39:57

Safety Information

2 English

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio or television reception, which can

be determined by turning the equipment off and on.

The user is encouraged to try to correct the

interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect this equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

• This class B digital product meets all

requirements of the Canadian Interference -

Causing Equipment Regulations.

Note to CATV system installer

This reminder is provided to call CATV system

installer's attention to Article 820-40 of the

National Electrical Code (Section 54 of Canadian

Electrical Code, Part I) that provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building as close to the

point of cable entry as practical.

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lighting flash and Arrowhead within the

triangle is a warning sign alerting you of

dangerous voltage inside the product.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The explanation point within the triangle

is a warning sign alerting you of important

instructions accompanying the product.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

| NOTE |

If the Region number of a Blu-ray Disc/DVDs does not

correspond to the Region number of this player, the player

cannot play the disc.

02235C-BD-ES6000-ZX-ENG.indd 2 2012-04-25 오후 2:39:57

01 Safety Information

Precautions

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below.

Keep these operating instructions handy for future

reference.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including AV receivers) that

produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where it exits the

apparatus.

11. Only use attachments/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from the inside to

the outside of the disc.

• Disc Storage

Do not keep in direct sunlight.

Keep in a cool ventilated area.

Keep in a clean protection jacket and store

vertically.

Handling Cautions

• Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids,

such as vases on the apparatus.

• To turn this apparatus off completely, you must

pull the power plug out of the wall socket.

Consequently, the power plug must be easily

and readily accessible at all times.

English 3

02235C-BD-ES6000-ZX-ENG.indd 3 2012-04-25 오후 2:39:59

Safety Information

• Do not plug multiple electric devices into the

same wall socket. Overloading a socket can

cause it to overheat, resulting in a fire.

• Maintenance of Cabinet.

- Before connecting other components to this

player, be sure to turn them off.

- If you move your player suddenly from a cold

place to a warm place, condensation may

occur on the operating parts and lens and

cause abnormal disc playback. If this occurs,

unplug the player, wait for two hours, and

then connect the plug to the power outlet.

Then, insert the disc, and try to play back

again.

• If the product makes an abnormal noise or

produces a burning smell or smoke, turn off

the power switch immediately and disconnect

the power plug from the wall outlet. Then,

contact the nearest customer service center for

technical assistance. Do not use the product.

Using the product as it is may cause a fire or an

electric shock.

Using the 3D function

IMPORTANT HEALTH AND SAFETY

INFORMATION FOR 3D PICTURES.

Read and understand the following safety

information before using the 3D function.

• Some viewers may experience discomfort while

viewing 3D TV such as dizziness, nausea, and

headaches.

If you experience any such symptom, stop

viewing 3D TV, remove the 3D Active Glasses,

and rest.

• Watching 3D images for an extended period of

time may cause eye strain. If you feel eye strain,

stop viewing 3D TV, remove your 3D Active

Glasses, and rest.

• A responsible adult should frequently check on

children who are using the 3D function.

If there are any reports of tired eyes, headaches,

dizziness, or nausea, have the child stop viewing

3D TV and rest.

• Do not use the 3D Active Glasses for other

purposes (Such as general eyeglasses,

sunglasses, protective goggles, etc.)

• Do not use the 3D function or 3D Active Glasses

while walking or moving around. Using the 3D

function or 3D Active Glasses while moving

around may cause you to bump into objects,

trip, and/or fall, and cause serious injury.

• If you want to enjoy 3D content, connect a 3D

device (3D compliant AV receiver or TV) to the

player's HDMI OUT port using a high-speed

HDMI cable. Put on 3D glasses before playing

the 3D content.

• The player outputs 3D signals only through

HDMI cable connected to the HDMI OUT port.

• As the video resolution in 3D play mode is fixed

according to the resolution of the original 3D

video, you can not change the resolution to your

preference.

• Some functions such as BD Wise, screen size

adjustment, and resolution adjustment may not

operate properly in 3D play mode.

• You must use a high-speed HDMI cable for

proper output of the 3D signal.

• Stay at least three times the width of the screen

from the TV when watching 3D images. For

example, if you have a 46-inch screen, stay 138

inches (11.5 feet) from the screen.

• Place the 3D video screen at eye level for the

best 3D picture.

• When the player is connected to some 3D

devices, the 3D effect may not function properly.

• This player does not convert 2D content into

3D.

• "Blu-ray 3D" and "Blu-ray 3D" logo are

trademarks of the Blu-ray Disc Association.

manual may be reproduced or copied without the

prior written permission of Samsung Electronics

Co.,Ltd.

4 English

02235C-BD-ES6000-ZX-ENG.indd 4 2012-04-25 오후 2:40:00

Contents

English 5

SAFETY INFORMATION

2 Warning

3 Precautions

3 Important Safety Instructions

3 Disc Storage & Management

3 Handling Cautions

4 Using the 3D function

4 Copyright

GETTING STARTED

7 Disc and Format Compatibility

7 Disc types and contents your player can

play

7 Disc types your player cannot play

8 Region Code

8 Logos of Discs the player can play

9 Supported Formats

11 Accessories

12 Front Panel

12 Rear Panel

13 Remote Control

13 Tour of the Remote Control

CONNECTIONS

14 Connecting to a TV

15 Connecting to an Audio System

15 Method 1 Connecting to an HDMI

supported AV receiver

15 Method 2 Connecting to an AV receiver

with Dolby Digital or DTS decoder

16 Connecting to a Network Router

16 Wired Network

16 Wireless Network

SETTINGS

17 The Initial Settings Procedure

17 The Home Screen

18 Accessing the Settings Screen

18 Buttons on the Remote Control Used for

the Settings Menu

19 Settings Menu Functions

24 Networks and the Internet

24 Configuring Your Network Connection

26 Wi-Fi Direct

27 Soft AP

28 AllShare Settings

28 Upgrading Software

28 By Online

29 By USB

29 By Disc

29 By Downloaded

30 Standby Mode Upgrade

MEDIA PLAY

31 Playing Commercial Video Discs

31 The AllShare Play Screen

31 Accessing the AllShare Play Screen

31 The AllShare Play Screen at a Glance

31 Playing Files on a USB Device or USB

Compatible Mobile Phone

32 Playing Commercial Audio Discs

32 Music Screen Controls

33 Playing a Disc with User Recorded

Content

33 Using the AllShare Network Function

33 To Download the AllShare Software

34 Playing Content Located on Your PC or

DLNA Device through the Blu-ray Disc

Player

34 Controlling the Playback of Content

Located on Your PC with Your Smart

Phone

02235C-BD-ES6000-ZX-ENG.indd 5 2012-04-25 오후 2:40:00

Contents

6 English

NETWORK SERVICES

42 Using Smart Hub

42 Smart Hub at a Glance

43 Using the Web Browser

44 BD-LIVE™

APPENDIX

45 Compliance and Compatibility Notice

46 Copy Protection

46 Network Service Disclaimer

47 License

49 Additional Information

49 Note

51 Resolution according to the contents type

52 Digital Output Selection

53 Troubleshooting

55 Repairs

56 Specifications

35 Controlling Video Playback

35 Buttons on the Remote Control used for

Video Playback

35 Using the Tools Menu

37 Controlling Music Playback

37 Buttons on the Remote Control used for

Music Playback

37 Using the Tools Menu

38 Repeating Tracks on an Audio CD

38 Shuffling Tracks on an Audio CD

38 Creating a Playlist from a CD

38 Ripping

39 Playing Photo Contents

39 Using the Tools Menu

40 Using the Tools Menu when a file is

highlighted

02235C-BD-ES6000-ZX-ENG.indd 6 2012-04-25 오후 2:40:00

02 Getting Started

Getting Started

Disc and Format Compatibility

Disc types and contents your player can play

Media Disc Type Details

VIDEO

Blu-ray Disc

3D Blu-ray Disc

BD-ROM or BD-RE/-R recorded in the BD-RE format.

DVD-VIDEO

DVD-RW

DVD-R

DVD+RW

DVD+R

DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and

finalized, or a USB storage media containing DivX, MKV, MP4 contents.

MUSIC

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media

containing MP3 or WMA contents.

PHOTO

CD-RW/-R,

DVD-RW/-R,

BD-RE/-R

Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media

containing JPEG contents.

| NOTE |

The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.

If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.

Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.

Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 25 Mbps.

Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio

adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.

When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.

Disc types your player cannot play

• HD DVD

• DVD-ROM/PD/

MV, etc

• DVD-RAM

• Super Audio CD

(except CD layer)

• DVD-RW(VR mode)

• CVD/CD-ROM/CDV/

CD-G/CD-I/LD

(CD-Gs play audio only,

not graphics.)

• 3.9 GB DVD-R for

Authoring.

English 7

02235C-BD-ES6000-ZX-ENG.indd 7 2012-04-25 오후 2:40:01

Getting Started

Region Code

Both players and discs are coded by region.

These regional codes must match for a disc to

play. If the codes do not match, the disc will not

play.

The Region Number for this player is displayed on

the rear panel of the player.

Disc Type

Region

Code

Area

Blu-ray Disc

North America, Central America,

South America, Korea, Japan,

Taiwan, Hong Kong and South

East Asia.

Europe, Greenland, French

territories, Middle East, Africa,

Australia and New Zealand.

India, China, Russia, Central and

South Asia.

DVD-VIDEO

The U.S., U.S. territories and

Canada

Europe, Japan, the Middle East,

Egypt, South Africa, Greenland

Taiwan, Korea, the Philippines,

Indonesia, Hong Kong

Mexico, South America,

Central America, Australia,

New Zealand, Pacific Islands,

Caribbean

Russia, Eastern Europe, India,

most of Africa, North Korea,

Mongolia

China

Logos of Discs the player can play

Blu-ray Disc 3D Blu-ray Disc

BD-LIVE DivX

NTSC broadcast system in

U.S.A, Canada, Korea, Japan

8 English

02235C-BD-ES6000-ZX-ENG.indd 8 2012-04-25 오후 2:40:04

02 Getting Started

Supported Formats

Video File Support

File Extension Container Video Codec Resolution

Frame rate

(fps)

Bitrate (Mbps) Audio Codec

*.avi

*.mkv

*.asf

*.wmv

*.mp4

*.3gp

*.vro

*.mpg

*.mpeg

*.ts

*.tp

*.trp

AVI

MKV

ASF

MP4

3GP

VRO

VOB

DivX 3.11/4.x/

5.x/6.1

1920x1080

6~30

Dolby Digital

LPCM

AAC

HE-AAC

WMA

DD+

MP3

DTS

MPEG4 SP/ASP

H.264 BP/

MP/HP

Window

Media Video v9

1920x1080

MPEG2

24/25/30

MPEG1 352x288

24/25/3 20

Limitations

- Even when a file is encoded by a supported codec listed above, the file might not be played if its

content is defective or corrupted.

- Normal playback is not guaranteed if the file's container information is wrong or the file itself is

corrupted.

- Files having higher bit or frame rates than standard may stutter when played back.

- The seek (skip) function is not available if the file's index table is damaged.

- When you playback a file remotely through a network connection, video playback may stutter

depending on the network speed.

- Some USB/Digital camera devices may not be compatible with the player.

Video decoder

- Supports up to H.264 Level 4.1

- Does not support GMC 2 or higher

Audio decoder

- Supports WMA 7, 8, 9 and STD

- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is more than 2.

- Does not support WMA sampling rate of 22050Hz mono.

English 9

02235C-BD-ES6000-ZX-ENG.indd 9 2012-04-25 오후 2:40:04

Getting Started

Comments

- MPEG4 : Supports up to GMC 1-Warping Point.

- H.264 : Supports up to BP/MP/HP Level 4.1.

- WMV : Supports V9, VC1 SP/MP/AP L3.

- MPEG1 : Does not support D-picture.

- MPEG2 : Supports up to Hight Profile High

Level.

Supported DivX subtitle file formats

*.ttxt, *.smi, *.srt, *.sub, *.txt

| NOTE |

Some DivX, MKV and MP4 format discs may not play,

depending on their video resolution and frame rate.

Music File Support

File

Extension

Container

Audio

Codec

Support Range

*.mp3

MP3

MP3 -

*.wma

WMA

* Sampling rates (in

kHz) - 8, 11, 16,

22, 32, 44.1, 48

* Bitrates - All bit-

rates in the range

5kbps to 384kbps

Notes on the USB connection

• Your player supports USB storage media, MP3

players, digital cameras, and USB card readers.

• Some USB/digital camera devices may not be

compatible with the player.

• Your player supports the FAT16, FAT32, and

NTFS files systems.

• Connect USB devices directly to the player's

USB port. Connecting through a USB cable

may cause compatibility problems.

• Inserting more than one memory device into

a multi-card reader may cause the reader to

operate improperly.

• The player does not support the PTP protocol.

• Do not disconnect a USB device during a

"loading" process.

• The bigger the image resolution, the longer the

image takes to display.

• This player cannot play MP3 files with DRM

(Digital Rights Management) downloaded from

commercial sites.

• Your player only supports video that is under

30fps (frame rate).

• Your player only supports USB Mass Storage

Class (MSC) devices such as thumb drives and

USB HDD. (HUB is not supported.)

• Certain USB HDD Devices, multi-card readers

and thumb drives may not be compatible with

this player.

• If some USB devices require excessive power,

they may be limited by the circuit safety device.

• If playback from a USB HDD is unstable, provide

additional power by plugging the HDD into a

wall socket.

If the problem continues, contact the USB HDD

manufacturer.

• You must remove the USB storage device

safely. (by performing the "Safely Remove

USB" function to prevent possible damage to

the USB memory.)

Press the HOME button to move to the home

screen, press the YELLOW (C) button, and

then press the

button.

• SAMSUNG is not responsible for any data file

damage or data loss.

• Your player does not support compression file,

sparse file and encryption file of NTFS.

- Before disconnecting a USB device, please

use USB Safety Removal.

- If you don't use USB Safety Removal, your

data on USB device can be corrupted or lost

- You can repair or format a USB device on

your Desktop PC. (MS-Windows OS only)

10 English

02235C-BD-ES6000-ZX-ENG.indd 10 2012-04-25 오후 2:40:04

02 Getting Started

AVCHD (Advanced Video Codec High Definition)

• This player can play back AVCHD format discs. These discs are normally recorded and used in

camcorders.

• The AVCHD format is a high definition digital video camera format.

• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional

image compressing format.

• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use

"x.v.Color" format.

• "x.v.Color" is a trademark of Sony Corporation.

• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony

Corporation.

| NOTE |

Some AVCHD format discs may not play, depending on the recording conditions.

AVCHD format discs need to be finalized.

"x.v.Color" offers a wider color range than normal DVD camcorder discs.

Accessories

Check for the supplied accessories shown below.

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

VOL+

VOL–

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS

VIEW

SUBTITLE FULL

SCREEN

SAMSUNG TV

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

Batteries for Remote Control (AAA Size) Adapter

HDMI cable User Manual Remote Control

English 11

02235C-BD-ES6000-ZX-ENG.indd 11 2012-04-25 오후 2:40:06

Getting Started

Front Panel

| NOTE |

When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the

remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the

button.

Lights when this player is in Standby mode, and it flashes while a signal is being received from the remote control sensor.

Rear Panel

| NOTE |

To upgrade the player's software through the USB Host jack, you must use a USB memory stick.

STANDBY INDICATORREMOTE CONTROL SENSOR

DISC SLOT

EJECT BUTTONPOWER BUTTON

STOP BUTTON

PLAY/PAUSE BUTTON

USB HOST DC 12V 2A

LAN

DIGITAL AUDIO OUT

HDMI OUT

12 English

02235C-BD-ES6000-ZX-ENG.indd 12 2012-04-25 오후 2:40:06

02 Getting Started

Remote Control

Tour of the Remote Control

Installing batteries

| NOTE |

If the remote does not operate properly:

- Check the polarity +/– of the batteries.

- Check if the batteries are drained.

- Check if the remote sensor is blocked by obstacles.

- Check if there is any fluorescent lighting nearby.

| CAUTION |

Dispose of batteries according to local environmental

regulations. Do not put them in the household trash.

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

VOL+

VOL–

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS

VIEW

SUBTITLE FULL

SCREEN

SAMSUNG TV

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

Press to eject a disc.

After setup, allows you to set the input

source on your TV.

(This button is only available in samsung TV.)

Turn the player on and off.

Return to the previous menu.

These buttons are used both for menus

on the player and also several Blu-ray Disc

functions.

Press numeric buttons to operate options.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to search backwards or forwards.

Use to access various audio functions on a

disc.

Press to move to the home screen.

Press to stop a disc.

Press to use Netflix.

Turn the TV on and off.

(This button is only available in samsung TV.)

TV volume adjustment.

(This button is only available in samsung TV.)

Press to pause a disc.

Press to play a disc.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Press to use the Tools menu.

Use to display the playback information.

Use to select menu items and change

menu values.

Press to exit the menu.

Use to enter the Popup menu/Title menu.

Press to use Smart Hub.

Press to use bonusview function. Press to use full screen function.

English 13

02235C-BD-ES6000-ZX-ENG.indd 13 2012-04-25 오후 2:40:06

Connections

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your

TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

| NOTE |

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player

to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player

automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Audio

Video

14 English

02235C-BD-ES6000-ZX-ENG.indd 14 2012-04-25 오후 2:40:07

03 Connections

Connecting to an Audio System

You can connect the Blu-ray player to an the audio system using the method illustrated below.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

• Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on

your receiver.

• Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder

• Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to

the Digital Optical In jack of the receiver.

• Good quality

• You will hear sound only through the front two speakers with Digital Output set to PCM.

Audio

Method 2

Audio

Method 1

English 15

02235C-BD-ES6000-ZX-ENG.indd 15 2012-04-25 오후 2:40:07

Connections

Connecting to a Network Router

You can connect your player to your network

router using one of the methods illustrated below.

To use the AllShare network functionality, you

must connect your PC to your network as shown

in the illustrations.

The connection can be wired or wireless.

Wired Network

| NOTE |

Internet access to Samsung's software update server

may not be allowed, depending on the router you use or

your ISP's policy. For more information, contact your ISP

(Internet Service Provider).

DSL users, please use a router to make a network

connection.

Wireless Network

| NOTE |

If your wireless router supports DHCP, this player can use

a DHCP or static IP address to connect to the wireless

network.

Set your wireless router to Infrastructure mode. Ad-hoc

mode is not supported.

The player supports only the following wireless security

key protocols:

- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),

WPA2-PSK (TKIP/AES)

Select a channel on the wireless router that is not

currently being used. If the channel set for the wireless

router is currently being used by another device nearby, it

will result in interference and communication failure.

If you select the Pure High-throughput (Greenfield)

802.11n mode and set the Encryption type on your router

or router to WEP, TKIP or TKIP-AES (WPS2Mixed), the

player will not support a connection in compliance with

new Wi-Fi certification specifications.

Wireless LAN, by its nature, may cause interference,

depending on the operating conditions (router

performance, distance, obstacles, interference by other

radio devices, etc).

Broadband

service

Broadband

service

Broadband modem

(with integrated router)

Broadband

modem

Router

Broadband

service

Wireless Router

16 English

02235C-BD-ES6000-ZX-ENG.indd 16 2012-04-25 오후 2:40:09

04 Settings

Settings

The Initial Settings Procedure

• The Home screen will not appear if you do not

configure the initial settings.

• The OSD (On Screen Display) may change in this

player after you upgrade the software version.

• The access steps may differ depending on the menu

you selected.

The Initial Settings Procedure lets you set the OSD

and menu languages, configure the connection

to your home network, choose the aspect ratio

output (screen size and format) that is correct for

your TV, and apply an upgrade to your player's

software, if one is available.

| NOTE |

If you skip Network Setup during the Initial Settings

procedure, you can configure your network settings later.

See "Configuring Your Network Connection" on pages

24~26 for instructions.

If you want to display the Initial Settings screen again and

make changes, select Settings > System > Initial Settings in

the Home screen or select the Reset option. (See pages 21

or 23)

If you want to use an Anynet+(HDMI-CEC) function,

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-CEC)-

compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in both the

TV and the player.

3) Set the TV to the Initial Settings Procedure.

The Home Screen

Smart Hub : Starts Smart Hub. From Smart Hub,

you can access YouTube, games, and other apps.

AllShare Play : Play videos, photos or music

content from Disc, USB, PC or mobile devices.

Settings : Set various functions to suit your

personal preferences.

Selecting an Option on the Home Screen

1. To select an option on the Home screen,

move the cursor using the ◄► buttons until

it highlights the option of your choice, and

then press the

button.

| NOTE |

If you leave the player in the stop mode for more than

5 minutes without using it, a screen saver will appear on

your TV. If the player is left in the screen saver mode for

more than 20 minutes, the power will automatically turn off.

Smart Hub AllShare Play

Set various functions to suit your personal preferences.

Settings

English 17

02235C-BD-ES6000-ZX-ENG.indd 17 2012-04-25 오후 2:40:09

Settings

Accessing the Settings Screen

1. Select Settings on the Home screen, and

then press

button. The Settings screen

appears.

2. To access the menus, sub-menus, and

options on the Settings screen, please refer

to the remote control illustration below.

Buttons on the Remote Control Used

for the Settings Menu

HOME Button : Press to move to the Home screen.

RETURN Button : Return to the previous menu.

(Enter) / DIRECTION Buttons :

• Press ▲▼◄► to move the cursor or select an

item.

• Press the

button to activate the currently

selected item or confirm a setting.

EXIT Button : Press to exit the current menu.

Detailed Function Information

Each Settings function, menu item, and individual

option is explained in detail on-screen. To view an

explanation, use the ▲▼◄► buttons to select the

function, menu item, or option. The explanation

will usually appear on the right side of the screen.

A short description of each Settings function

starts on the next page. Additional information on

some of the functions is also in the Appendix of

this manual.

Display

3D Settings

TV Aspect Ratio 16:9 Original

Smart Hub Screen Size Size 3

BD Wise On

Resolution Auto

Movie Frame (24Fs) Auto

HDMI Color Format Auto

HDMI Deep Color Auto

Progressive Mode Auto

Audio

Network

System

Support

PANDORA

DIGITAL

SUBTITLE

INPUT

HOME

VOL

–

SOURCE

DISC MENU

HOME SMART

TITLE MENU

VOL VOL

POPUP

A B C D

BONUS

VIEW

SUBTITLE FULL

SCREEN

SAMSUNG TV

HUB

– +

INFOTOOLS

RETURN

EXIT

AUDIO

2 4

18 English

02235C-BD-ES6000-ZX-ENG.indd 18 2012-04-25 오후 2:40:10

04 Settings

Settings Menu Functions

Display

3D Settings

Select whether to play a Blu-ray Disc with 3D contents

in 3D Mode.

•

If you move to the Home or Smart Hub Home

screen while in 3D mode, the player will switch to 2D

automatically.

TV Aspect Ratio

Lets you adjust the output of the player to the screen

size and screen format of your TV.

Smart Hub Screen Size

Lets you select the optimal size for the Smart Hub

Screen.

BD Wise

BD Wise is Samsung's latest inter-connectivity feature.

When you connect a Samsung player and a Samsung

TV with BD Wise to each other via HDMI, and BD Wise

is on in both the player and TV, the player outputs video

at the video resolution and frame rate of the Blu-ray

Disc/DVD.

Resolution

Set the output resolution of the HDMI video signal to

Auto, 1080p, 1080i, 720p or 480p.

The number indicates the number of lines of video per

frame.

The i and p indicate interlaced and progressive scan,

respectively. Generally, the higher quality.

Movie Frame (24Fs)

If the player is connected to a 24Fs compatible TV,

setting the Movie Frame (24Fs) feature to Auto lets the

player adjust its HDMI output to 24 frames per second

automatically for improved picture quality.

•

You can enjoy the Movie Frame (24Fs) feature only on

a TV supporting this frame rate.

•

Movie Frame is only available when the player is in the

HDMI 1080i or 1080p output resolution modes.

HDMI Color Format

Lets you set the color space format for the HDMI output

so that it matches the capabilities of the connected

device (TV, monitor, etc). The screen goes black

momentarily after you have selected a format.

HDMI Deep Color

Lets you set the product to output HDMI video with

Deep Color. Deep Color provides more accurate color

reproduction with greater color depth.

Progressive Mode Lets you improve picture quality when viewing DVDs.

English 19

02235C-BD-ES6000-ZX-ENG.indd 19 2012-04-25 오후 2:40:10

Settings

Audio

Digital Output

Lets you select the digital audio output format that is

suitable for your TV or AV Receiver. For more details,

see the digital output selection table on page 52.

PCM Downsampling

Lets you choose to have 96Khz PCM signals

downsampled to 48Khz before they are outputted to an

amplifier. Choose On if your amplifier or receiver is not

compatible with a 96Khz signal.

Dynamic Range Control

Lets you apply dynamic range control to Dolby Digital,

Dolby Digital Plus, and Dolby True HD audio.



Auto : Automatically controls the dynamic range of

Dolby TrueHD audio, based on information in the

Dolby TrueHD soundtrack. Also turns dynamic range

control on for Dolby Digital and Dolby Digital Plus.



Off : Leaves the dynamic range uncompressed,

letting you hear the original sound.



On : Turns dynamic range control on for all three

Dolby formats. Quieter sounds are made louder and

the volume of loud sounds is reduced.

Downmixing Mode

Lets you select the multi-channel downmix method that

is compatible with your stereo system. You can choose

to have the player downmix to normal stereo or to

surround compatible stereo.

Network

Network Settings

Configure the network connection so you can enjoy

various features such as Internet services or AllShare

Wi-Fi functionality, and perform software upgrades.

Network Status Lets you check the current network and Internet status.

Wi-Fi Direct

Lets you connect a Wi-Fi Direct device to the player

using a peer-to-pear network, without the need for a

wireless router. Note that if you set wireless network, it

may be disconnected while you're using Wi-Fi Direct.

20 English

02235C-BD-ES6000-ZX-ENG.indd 20 2012-04-25 오후 2:40:10

04 Settings

Network

Soft AP

Lets you connect other types of Wi-Fi devices to the

player wirelessly. Requires that you create a security key

which you must enter into the other Wi-Fi devices when

you are connecting them to the network.

AllShare Settings

Lists network connected AllShare devices and lets you

control whether each device (a smartphone, a tablet,

etc.) can share content with or control the player.

Device Name

Lets you input a name for the player that will identify it

on your networks.

BD-Live Settings

Set various BD-Live function. BD-Live allows you to

access extra features available on some Blu-ray Discs if

you are connected to the Internet.



BD-Live Internet Connection : Lets you fully allow,

partly allow, or prohibit a BD-Live Internet connection.



BD Data Management : Manage BD data

downloaded from a BD-Live service or Blu-ray Disc.

System

Initial Settings Lets you re-run the Initial Settings procedure.

Quick Start

Lets you set the player to turn on quickly by decreasing

the boot time.

| NOTE |

If this function set to On, Standby power consumption will be

increased.

English 21

02235C-BD-ES6000-ZX-ENG.indd 21 2012-04-25 오후 2:40:10

Settings

System

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked

operations with other Samsung players that have the

Anynet+ feature and lets you control those products

with one Samsung TV remote. To operate this function,

you must connect this player to an Anynet+ Samsung

TV using an HDMI cable.

Device Manager

You can connect a wireless USB keyboard or mouse to

the USB port on the rear of the player.



Keyboard Settings : Lets you configure a wireless

USB keyboard connected to the player.

| NOTE |

You can use the keyboard only when a QWERTY keyboard

screen or window appears in the Web Browser.



Mouse Settings : Lets you configure a wireless USB

mouse connected to the player. You can use the

mouse in the player's menu in the same way you use

a mouse on your PC.

To use a mouse with the player's menu:

Connect the USB mouse to the player.

Click the primary button you selected in Mouse

Settings. The Simple Menu appears.

Click the menu options you want.

| NOTE |

Depending on the model of the USB HID keyboard and mouse

may not be compatible with your product.

Some HID keyboard keys may not work.

Wired USB keyboards are not supported.

Some applications may not be supported.

If a wireless HID Keyboard does not operate because of

interference, move the keyboard closer to the player.

Language

You can select the language you prefer for the On-

screen menu, disc menu, subtitles, etc.

•

The language you select for the disc menu, disc

audio, or subtitles will only appear if it is supported on

the disc.

22 English

02235C-BD-ES6000-ZX-ENG.indd 22 2012-04-25 오후 2:40:10

04 Settings

System

Security

The default PIN is 0000. Enter the default PIN to access

the security function if you haven't created your own

PIN. After you have accessed the security function for

the first time, change the PIN using the Change PIN

function.



BD Parental Rating : Prevents playback of Blu-ray

Discs with a rating equal to or above a specific age

rating you enter unless the PIN is entered.



DVD Parental Rating : Prevents playback of DVDs

with a rating above a specific numerical rating you

select unless the PIN is entered.



Change PIN : Change the 4-digit PIN used to access

security functions.

If you forget your PIN:

Remove any disc or USB storage device.

Press and hold the

button on the front panel for

5 seconds or more.

All settings will revert to the factory settings.

General

You can change the options listed below to match your

preferences.



Time Zone : Select the time zone in which you live.



Menu Transparency : Adjust the transparency of the

menu box.

DivX® Video On

Demand

View DivX® VOD Registration Codes to purchase and

play DivX® VOD contents.

Support

Software Upgrade

For more information about the Software Upgrade

function, see "Upgrading Software" on pages 28~30.

Contact Samsung

Provides contact information for assistance with your

player.

Remote Management

When activated, lets Samsung Call Center agents

diagnose and fix problems with the product remotely.

Requires an active Internet connection.

| NOTE |

Remote Management service might not be available in some

countries.

Contact your nearest service center for your PIN code and tell

the code to the person in charge. It enables remote diagnosis

of the product and required measures.

Reset

Resets all settings to their default settings except for the

network and Smart Hub settings.

The default security PIN is 0000.

English 23

02235C-BD-ES6000-ZX-ENG.indd 23 2012-04-25 오후 2:40:10

Settings

Networks and the Internet

When you connect this player to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE,

and upgrade the player's software through the

network connection. For more information about

accessing and using Internet services, see the

Network Services chapter of this manual on pages

42~44. Instructions for configuring the network

connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network, connect

the player to your router using a LAN cable before

you start the configuration procedure.

If you are connecting to a wireless network,

disconnect any wired network connection before

you begin.

To begin configuring your network connection,

follow these steps:

1. In the Home screen, select Settings, and

then press the

button.

2. Select Network, and then press the

button.

3. Select Network Settings, and then press the

button.

4. Go to the instructions for Wired networks

starting below or the instructions for Wireless

networks starting on page 25.

Wired Network

Wired - Automatic

After following Steps 1 to 3 above:

1. Select Start in the Network Settings screen,

and then press the

button. The player

detects the wired connection, verifies the

network connection and then connects to the

network.

Wired - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After following Steps 1 to 3 above:

1. Select Start in the Network Settings screen,

and then press the

button.

The Network Status screen appears.

The player attempts to verify the network

connection and fails.

2. Select IP Settings on the right of the screen,

and press the

button.

The IP Settings screen appears.

3. Select the IP Mode field, and then set it to

Manual.

4. Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

| NOTE |

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 25.

5. When done, highlight OK, and then press

button. The player verifies the network

connection and then connects to the

network.

IP Settings

Retry

Network Settings

Wired network connection failed.

IP auto setting failed. Try the following to set your IP address

automatically. Or set your IP address manually by selecting 'IP

Settings'.

- Ensure DHCP server is enabled on router and unplug and re-plug-in

the router.

- Contact your Internet Service Provider for more information.

MAC Address XX:XX:XX:XX:XX:XX

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway 0.0.0.0

DNS Server 0.0.0.0

24 English

02235C-BD-ES6000-ZX-ENG.indd 24 2012-04-25 오후 2:40:10

04 Settings

< Getting the Network Settings Values >

You can view your Network Settings values on

most Windows computers. To view the Network

Settings values, follow these steps:

• Windows XP

1. Right click the Network icon on the bottom

right of the Windows desktop.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support

tab.

4. On the Support tab, click the Details button.

The Network settings are displayed.

• Windows 7

1. Click the Network icon on the bottom right of

the Windows desktop.

2. In the pop-up menu, click Network and

Sharing Center.

3. On the dialog that appears, click the Local

Area Connection or Wireless Network

Connection depending on your network

connection.

4. On the Support tab, click the Details button.

The Network settings are displayed.

| NOTE |

Depending on your Windows version, the information may

differ.

Wireless Network

You can setup a wireless network connection in

three ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

When you configure the wireless network

connection, any wireless network devices currently

connected through the player or, if applicable,

the player's current wired connection, will be

disconnected.

Wireless (General) - Automatic

After followng Steps 1 to 3 in "Configuring Your

Network Connection" on page 24.

1. Select Start in the Network Settings screen,

and then press the

button.

The player searches for and then displays a

list of the available networks.

2. Select the desired network, and then press

the

button.

3. Select Next, and then press the

button

again.

4. On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter letters

by selecting a letter with an arrow button, and

then pressing

button.

5. When done, select Next at the right of the

screen. The player verifies the network

connection and then connects to the

network.

| NOTE |

You should be able to find the Security Code or Pass

Phrase on one of the set up screens you used to set up

your router or modem.

Wireless (General) - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After folloiwng Steps 1 to 3 in "Configuring Your

Network Connection" on page 24.

WPS(PBC)

Cancel

Refresh

Network Settings

Select your wireless router from the list.

iptime23

ELT

JSY

KT_WLAN_C361

Mirhenge_edu

SO070VOIP

English 25

02235C-BD-ES6000-ZX-ENG.indd 25 2012-04-25 오후 2:40:10

Settings

1. Select Start in the Network Settings screen,

and then press the

button. The player

searches for and then displays a list of the

available networks.

2. Select the desired network, and then press

the

button.

3. Select Next, and then press the

button

again.

4. On the Security screen, enter your network's

Security Code or Pass Phrase. Enter

numbers directly using the number buttons

on your remote control. Enter letters by

selecting a letter with the ▲▼◄► buttons,

and then pressing the

button.

5. When done, select Next at the right of the

screen, and then press the

button.

6. The Network Status screen appears.

The player attempts to verify the network

connection and fails.

7. Select IP Settings on the right of the screen,

and press the

button. The IP Settings

screen appears.

8. Select the IP Mode field, and then set it to

Manual.

9. Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

| NOTE |

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 25.

10. When done, highlight OK, and then press

button. The Network Status screen appears.

The product verifies the network connection

and then connects to the network. When it

is done, highlight OK, and then press

button.

WPS(PBC)

After followng Steps 1 to 3 in "Configuring Your

Network Connection" on page 24.

1. Select Start in the Network Settings screen,

and then press the

button.

The player searches for and then displays a

list of the available networks.

2. Press the WPS(PBC) button on your router

within two minutes. Your player automatically

acquires all the network settings values it

needs and connects to your network.

The Network Status screen appears. The

player connects to the network after the

network connection is verified.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect

Wi-Fi Direct devices to the player and each other

using a peer-to-peer network, without a wireless

router.

| NOTE |

Some Wi-Fi Direct devices may not support the AllShare

function if connected via Wi-Fi Direct. If this is the case,

it is advisable to change the network connection method

between devices.

1. Turn on the Wi-Fi direct device and activate

its Wi-Fi Direct function.

2. In the Home screen, select Settings, and

then press the

button.

3. Select Network, and then press the

button.

4. Select Wi-Fi Direct, and then press the

button.

The Wi-Fi Direct devices that you can

connect appear.

Display

Audio

Network

System

Support

Refresh

Wi-Fi Direct

Device Name : [BD]ES6000

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

Return

26 English

02235C-BD-ES6000-ZX-ENG.indd 26 2012-04-25 오후 2:40:11

04 Settings

5. You have three ways to complete the Wi-Fi

connection:

• Through the Wi-Fi device.

• Through the player using PBC.

• Through the player using a PIN.

Each is covered below.

Through the Wi-Fi Device

1. On the Wi-Fi device, follow the procedure on

the device for connecting to another Wi-Fi

Direct device. See the device's user manual

for instructions.

2. When you have completed the procedure,

you should see a pop-up on your TV screen

saying that a device that supports Wi-Fi

Direct has requested to connect. Select OK,

and then press the

button to accept.

3. The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi

Direct screen as connected.

Through the Player Using PBC

1. Select the Wi-Fi Direct device you want to

connect to this player, and then press the

button. The PBC/PIN pop up appears.

2. Select PBC, and then press the

button.

The PBC pop-up appears.

3. Press the PBC button on the Wi-Fi Direct

device within 2 minutes.

4. The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi

Direct screen as connected.

Through the Player Using a PIN

1. Select the Wi-Fi Direct device you want to

connect to this player, and then press the

button. The PBC/PIN pop up appears.

2. Select PIN, and then press the

button.

The PIN pop-up appears.

3. Note the PIN code in the pop-up, and then

enter it into the appropriate field in the Wi-Fi

Direct device you want to connect.

4. The Connecting pop-up appears, followed

by the Connected pop-up. When it closes,

you should see the device listed on the Wi-Fi

Direct screen as connected.

| NOTE |

The wired or wireless network connection will be

disconnected when you use the Wi-Fi Direct function.

Soft AP

Soft AP is short for Software enabled Access

Point.

Soft AP lets you connect other Wi-Fi devices to

your network through the player and lets you can

enjoy various features such as AllShare network

functionality or network remote control.

It requires that you create a security key which you

must enter into the other Wi-Fi devices when you

are connecting them to the network.

1. In the Home screen, select Settings, and

then press the

button.

2. Select Network, and then press the

button.

3. Select Soft AP, and then press the

button.

4. Select On or Off, and then press the

button.

< To Set the Soft AP Security Key >

1. On the Soft AP screen, select Security Key,

and then press the

button. The Security

Key screen appears.

2. On the Security key screen, enter a security

key. Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with the ▲▼◄►

buttons, and then pressing the

button.

3. When done, use the the ▲▼◄► buttons to

move to Done at the bottom of the screen,

and then press the

button.

When you connect a Wi-Fi device through the

connection procedure on the device, you must

enter the security key you created here into the

appropriate field.

English 27

02235C-BD-ES6000-ZX-ENG.indd 27 2012-04-25 오후 2:40:11

Settings

AllShare Settings

The AllShare Settings screen lists your network

connected AllShare devices and their IP

addresses. Through this screen, you can allow

a device to access the player, deny access, or

delete the device from the AllShare list.

1. In the Home screen, select Settings, and

then press the

button.

2. Select Network, and then press the

button.

3. Select AllShare Settngs, and then press the

button.

4. Select a device, and then press the

button. The AllShare Settings pop-up

appears.

5. Select Allow, Deny, or Delete from the list,

and then press the

button.

The AllShare Settings screen only displays devices

if you have established networked connections

to AllShare devices. For more information about

AllShare networked devices, see page 31.

Upgrading Software

The Software Upgrade menu allows you to

upgrade the player's software for performance

improvements or additional services.

• Never turn the player off or back on manually during

the update process.

1. In the Home screen, select the Settings, and

then press the

button.

2. Select Support, and then press the

button.

3. Select Software Upgrade, and then press

the

button.

4. Select one of the following methods:

• By Online

• By USB

• By Disc

• By Downoaded

• Standby Mode Upgrade

5. Press the

button.

| NOTE |

The upgrade is complete when the player turns off, and

then turns on again by itself.

Samsung Electronics shall takes no legal responsibility

for player malfunction caused by an unstable Internet

connection or consumer negligence during a software

upgrade.

If you want to cancel the upgrade while the upgrade

software is downloading, press the

button.

By Online

Your player must be connected to the Internet to

use the By Online function.

1. Select By Online, and then press the

button. The Connecting to Server message

appears.

2. If there is a download available, the Download

pop-up appears with a progress bar and the

download starts.

3. When the download is complete, the

Upgrade Query window appears with three

choices: Upgrade Now, Upgrade Later, or

Don't Upgrade.

4. If you select Upgrade Now, the player

upgrades the software, turns off, and then

turns on automatically.

5. If you do not make a selection in one minute

or select Upgrade Later, the player stores

the new upgrade software. You can upgrade

the software later using the By Downloaded

function.

6. If you select Don't Upgrade, the player

cancels the upgrade.

28 English

02235C-BD-ES6000-ZX-ENG.indd 28 2012-04-25 오후 2:40:11

04 Settings

By USB

1. Visit www.samsung.com.

2. Click SUPPORT on the top right of the page.

3. Enter the product's model number into the

search field, and then click Find Product.

4. Click Get downloads in the center of the

page below the Downloads header.

5. Click Firmware in the center of the page.

6. Click the ZIP icon in the File column on the

right side of the page.

7. Click OK in the pop-up that appears to

download and save the firmware file to your

PC.

8. Unzip the zip archive to your computer. You

should have a single folder with the same

name as the zip file.

9. Copy the folder to a USB flash drive.

10. Make sure no disc is inserted in the player,

and then insert the USB flash drive into the

USB port of the player.

11. In the player's menu, go to Settings >

Support > Software Upgrade.

12. Select By USB.

| NOTE |

There should be no disc in the player when you upgrade

the software using the USB Host jack.

When the software upgrade is done, check the software

details in the software Upgrade menu.

Do not turn off the player during the software upgrade.

It may cause the player to malfunction.

Software upgrades using the USB Host jack must be

performed with a USB flash memory stick only.

By Disc

1. Follow Steps 1 through 7 in By USB.

2. Unzip the zip archive to your computer. You

should have a single folder with the same

name as the zip file.

3. Write the folder onto a disc. We recommend

a CD-R or DVD-R.

4. Finalize the disc before you remove it from

your computer.

5. Insert the disc into the player.

6. In the player's menu, go to Settings >

Support > Software upgrade.

7. Select By Disc.

| NOTE |

When the system upgrade is done, check the software

details in the software Upgrade menu.

Do not turn off the player during the Software Upgrade.

It may cause the player malfunction.

By Downloaded

The By Downloaded option lets you upgrade

using a file the player downloaded earlier but

you decided not to install immediately or a file

downloaded by the player in Standby Mode.

1. If upgrade software has been downloaded,

you will see the software version number to

the right of By Downloaded.

2. Select By Downloaded, and then press the

button.

3. The player displays a message asking if you

want to upgrade. Select Yes. The player

begins the upgrade.

4. When the update is complete, the player

turns off automatically, and then turns on.

| NOTE |

When the system upgrade is done, check the software

details in the software Upgrade menu.

Do not turn off the player during the software Upgrade.

It may cause the player to malfunction.

English 29

02235C-BD-ES6000-ZX-ENG.indd 29 2012-04-25 오후 2:40:11

Settings

Standby Mode Upgrade

You can set the Standby Mode Upgrade function

so that the player downloads new upgrade

software when it is in Standby mode.

In Standby mode, the player is off, but its Internet

connection is active. This allows the player to

download upgrade software automatically, when

you are not using it.

1. Press the ▲▼ buttons to select Standby

Mode Upgrade, and then press the

button.

2. Select On or Off.

If you select On, the player will automatically

download new upgrade software when it

is in Standby mode with the power off. If it

downloads new upgrade software, the player

will ask you if you want to install it when you

turn the player on.

| NOTE |

To use Standby Mode Upgrade function, your player must

be connected to the Internet.

30 English

02235C-BD-ES6000-ZX-ENG.indd 30 2012-04-25 오후 2:40:12

05 Media Play

Media Play

Your Blu-ray Disc Player can play content located

on Blu-ray/DVD/CD discs, USB devices, PCs, and

DLNA compatible cell phones. To play content

located on your PC or on a DLNA compatible cell

phone, you must connect your PC and the player

to your network and download and install the

AllShare network software on your PC.

Playing Commercial Video Discs

1. Push a disc gently into the slot with the disc’s

label facing up. Playback starts automatically.

2. If playback does not start automatically, press

the

button on the remote or see “The

AllShare Play Screen” below.

The AllShare Play Screen

For all media, except for commercail video discs,

the AllShare Play Main Screen or one of its

subscreens is your primary means of accessing

and selecting content to view or play. For example,

if you connect a USB device to the player, the

player will display the content located on the USB

device on the AllShare Play USB screen.

| NOTE |

You can use the AllShare Play Screen to access a

commercial video disc. For example, when you stop a

movie, but leave the disc in the player, you can start it

again using the AllShare Play Screen. However, unlike

other media, when you insert a commercial video disc,

it bypasses the AllShare Play Screen and starts playing

automatically.

Accessing the AllShare Play Screen

To access the AllShare Play Main screen, select

AllShare Play on the Home screen, and then press

the

button.

The AllShare Play Screen at a Glance

My List : Lists recently played or viewed files. If the

device or media containing files listed in My List is

inserted into or connected to the player, you can

use My List to play or view those files.

Contents Type : Lets you select the type of content

to view or play: Videos, Photos, or Music.

Device Type : Lets you select the device or media

where the content is located.

Displays the colored buttons on your remote that

you can press to access or perform functions.

| NOTE |

The video files played via DLNA will be listed in My List

only when the network connection has been established.

Blu-ray/DVD/CD disk contents will not be listed in My List.

The AllShare Play screen will only display files of the

Content Type you selected. For example, if you select

Music, you will only be able to see music files. If you open

folders labeled Photos or Videos, no files will be displayed.

To view other types of files, select a different Content Type.

Playing Files on a USB Device or

USB Compatible Mobile Phone

There are two methods you can use to play or

view multimedia files located on a USB device

or USB compatible mobile phone through your

player.

AllShare Play

/ Videos /

Disc

USB

DLNA

Return

My list

Videos

Photos

Music

No Disc inserted.

There is no device connected.

English 31

02235C-BD-ES6000-ZX-ENG.indd 31 2012-04-25 오후 2:40:12

Media Play

Method 1

1. Turn the player on.

2. Connect the USB device or mobile phone to

the USB port on the rear panel of the player.

The New Device Connected pop-up appears.

| NOTE |

If the pop-up does not appear, go to Method 2.

3. Use the ▲▼ buttons to select Videos,

Photos, or Music, and then press the

button. The AllShare Play screen appears

listing the content of the device or phone.

Depending on how the contents is arranged,

you will see either folders, individual files, or

both.

4. Select a file to view or play, and then press

the

button.

5. Press the RETURN button to exit a folder or

to return to the Home screen.

Method 2

1. Turn the player on.

2. Connect the USB device or mobile phone to

the USB port on the rear panel of the player.

3. Select AllShare Play on the Home screen,

and then press the

button.

4. On the left side, select Videos, Photos, or

Music, and then press the

button.

5. On the right side, select USB, and then press

the

button. The AllShare Play screen

appears listing the contents of the device or

phone. Depending on how the contents are

arranged, you will see either folders, individual

files, or both.

6. If necessary, use the the ▲▼◄► buttons

to select a folder, and then press the

button.

7. Use the ▲▼◄► buttons to select a file to

view or play, and then press the

button.

8. Press the RETURN button to exit a folder or

to return to Home screen.

| NOTE |

To remove the USB storage device, you must use the

“Safely Remove USB” function to prevent possible

damage to the USB memory. Press the HOME button to

move to the Home screen, press the YELLOW (C) button,

and then press the

button.

If you insert a disc when playing a USB device or phone,

the device mode changes to "Disc" automatically.

If your mobile phone is DLNA compatible, you can play

contents without connecting a USB cable. See "Using the

AllShare Network Function" on pages 33~34.

Playing Commercial Audio Discs

1. Place a pre-recorded, commercial audio disc

into the disc tray with the disc’s label facing

up, and then close the tray. The AllShare

Music screen appears listing the tracks.

Playback of the first track starts automatically.

2. To play a particular track, use the ▲▼ buttons

on the remote to select the track, and then

press the

button.

Music Screen Controls

Page Move

Tools

Return

AllShare Play

/ Music /

Audio CD

TRACK 001